The boiling point of a solution depends on the concentration of solute in the solution. When a solute is dissolved in a solvent, it raises the boiling point of the solution compared to the boiling point of the pure solvent. This is because the solute particles interfere with the hydrogen bonding between the solvent molecules, making it more difficult for the solvent to evaporate.
In this case, 180.00 grams of C6H12O6 (glucose) has been dissolved in 1,000.0 grams of water, so the concentration of glucose in the solution is 180.00 g / 1000.0 g = 0.18 g/g, or 18%.
The boiling point of a solution can be estimated using the formula ΔTb = Kb x molality, where ΔTb is the change in boiling point, Kb is the molal boiling point constant for water (0.512 °C/m), and molality is the concentration of solute in the solution in moles per kilogram of solvent.
Using this formula, the change in boiling point for the glucose solution can be calculated as follows:
ΔTb = Kb x molality = 0.512 °C/m x (0.18 moles/kg) = 0.093 °C
The boiling point of pure water at 1 atmosphere is 100.0 °C, so the boiling point of the glucose solution is 100.0 °C + 0.093 °C = 100.093 °C.
Therefore, the answer to the question is (3) 99.48°C.
Which two measurable heats is heat of solution made up of?
The heat of solution is made up of two measurable heats, the heat of hydration and the heat of lattice energy.
The heat of hydration is the amount of heat released when one mole of a substance is dissolved in water, and the heat of lattice energy is the amount of heat released when one mole of a solid ionic compound is formed from its gaseous ions.
Together, these two heats make up the heat of solution, which is the overall amount of heat released or absorbed during the dissolution of a substance in a solvent.
Learn more about dissolution in:
https://brainly.com/question/29828854
#SPJ11
Of the following, which gives the correct order for atomic radius for Mg,Na,P,Si, n Ar.
a. Mg>Na>P>Si>Ar
b. Ar>P>Si>Mg>Na
c. Si>P>Ar>Na>Mg
d. Ar>Si>P>Na>Mg
e. Na>Mg>Si>P>Ar
The correct order for atomic radius for Mg, Na, P, Si, and Ar is
d. Ar > Si > P > Na > Mg.
Atomic radius refers to the size of an atom, which is determined by the distance between the nucleus and the outermost electrons. The size of an atom decreases from left to right across a row in the periodic table because the number of protons in the nucleus increases, creating a stronger attractive force that pulls the electrons closer to the nucleus. The size of an atom also decreases from top to bottom within a group or column in the periodic table because the number of electron shells increases, resulting in a greater shielding effect that reduces the attractive force between the nucleus and outer electrons.
To learn more about Atomic radius here:
https://brainly.com/question/13607061
#SPJ4
Given 6. 000 moles of aluminum (Al ) , how many grams of aluminum oxide (Al 2O 3) will be produced?
56.7 grams of aluminum oxide (Al2O3) are produced from 6. 000 moles of aluminum (Al ).
To solve this problem, we need to use the balanced chemical equation for the reaction between aluminum and oxygen to form aluminum oxide:
4 Al + 3 O2 → 2 Al2O3 From this equation, we can see that for every 4 moles of aluminum that react, 2 moles of aluminum oxide are produced. Therefore, we can use the following stoichiometric calculation to find the mass of aluminum oxide produced: 6.000 moles Al * (2 moles Al2O3 / 4 moles Al) * (101.96 g Al2O3 / 1 mole Al2O3) = 305.84 g Al2O3 So, 6.000 moles of aluminum will produce 305.84 grams of aluminum oxide.
To learn more about aluminium oxide please visit - https://brainly.com/question/25869623
#SPJ4
when measuring liquids in a graduated cylinder your eye level should be parallel to the level of the? your answer should be one word and not case sensitive (upper and lower case does not matter).
Your eye level should be parallel to the level of the meniscus when measuring liquids in a graduated cylinder.
While measuring liquids in a graduated cylinder, it is critical to keep your eye level in the line up with the level of the meniscus. The meniscus is the bent surface of the fluid that structures at the highest point of the fluid in the graduated chamber.
This bent surface can make the fluid level seem higher or lower than it really is, contingent upon the place where it is seen. By keeping your eye level line up with the meniscus, you can kill any parallax mistake and get a more precise estimation. To peruse the volume of the fluid precisely, you ought to ensure the lower part of the meniscus is at the graduation line on the chamber.
Learn more about meniscus:
https://brainly.com/question/30335396
#SPJ4
a solution is made using 191.7 ml of isopropanol (density 0.7860 g/ml) and 275.0 ml of water (density 1.000 g/ml). what is the molality isopropanol in water?
Isopropanol has a molality in water of 9.1315 M. suppose a solution is created using 275.0 ml of water and 191.7 ml of isopropanol, both of which have a density of 1.000 g/ml.
Molarity = grams of solute/molar mass of solute x 1/mass of solvent(Kg)
mass os isopropanol = density x volume
= 0.7860 g/ml x 191.7 ml
= 150.6762 gm
mass of water(solvent) = 275.0 ml x 1.000 g/ml
=275.0 gm
= 0.275 Kg
Molarity = 150.67gm / 60g/mol x 1/0.275Kg
Molarity = 9.1315 M
The number of moles of solute per litre of solution is known as molecularity or molar concentration.
The mass or moles of solute and the volume of the solution can be converted using molar concentration.
Homogeneous mixes are created when ingredients are combined in a way that ensures the composition is consistent throughout the sample. The term "heterogeneous" refers to a mixture that does not have a constant composition across the sample.
Learn more about Molarity here:
https://brainly.com/question/8732513
#SPJ4
in a 78.0-g 78.0 -g aqueous solution of methanol, ch4o, ch 4 o , the mole fraction of methanol is 0.100. 0.100. what is the mass of each component?
The mole fraction of methanol is 0.100 in a 78.0-g 78.0-g aqueous solution of methanol, ch4o, ch 4 o. Is the mass of methanol in the solution is 7.809 g and the mass of water is 39.425 g.
The mole fraction of methanol (CH4O) in the solution is 0.100, which means that 10% of the moles of the solution are methanol. We can use this information, along with the total mass of the solution, to determine the mass of each component.
The total moles of the solution can be calculated by dividing the total mass of the solution by its molar mass. Methanol has a molar mass of 32.04 g/mol, so we have:
total moles of solution = 78.0 g / 32.04 g/mol = 2.434 mol
Now we can calculate the moles of methanol:
moles of methanol = 0.100 x 2.434 mol = 0.2434 mol
The remaining moles are water:
moles of water = 2.434 mol - 0.2434 mol = 2.1906 mol
To calculate the mass of each component, we can use their respective molar masses:
mass of methanol = 0.2434 mol x 32.04 g/mol = 7.809 g
mass of water = 2.1906 mol x 18.02 g/mol = 39.425 g
Therefore, the mass of methanol in the solution is 7.809 g and the mass of water is 39.425 g.
Learn more about molar mass here:
https://brainly.com/question/12127540
#SPJ4
Transcribed image text: Determine the products for the following reactions. A Br Pd(OAC) OH P(o-tolyl)3 (CH3CH2)2N Br Pd(OAC)2 B Portolyl)3 (CH3CH2)2N | To RO obal Reset
Phosphorous halides and alcohol react to form alkyl halides, as well as the byproducts phosphoryl chloride (POCl3) and HCl.
The best methods for converting alcohols into alkyl halides are phosphorous halides and thionyl chloride.
As a chlorinating agent, it is employed. It serves as an intermediary in the production of phosphoric acid derivatives, chloro-anhydrides, and phosphorus acid. It serves as an intermediary in the production of organophosphorus insecticides, water purification systems, lubricant additives, and other products.
A fuming, oily liquid with a pungent stench, phosphorus oxychloride can range in hue from white to pale yellow. In addition to being employed as a chlorinating agent, it is also used in the production of semiconductors, plasticizers, hydraulic fluids, and pesticide-like organophosphorus compounds.
For such more question on Phosphorous
https://brainly.com/question/1594180
#SPJ4
Note: The correct question would be as bellow,
What are the products of following reaction?
[tex]CH_3CH_2 -OH+PC1_5- >[/tex]
which of the following would be expected to have the highest heat of vaporization? a) h2o c) hf b) nh3 d) all three are the same
The highest heat of vaporization is in the case of a) H2O that is explained below.
The heat of vaporization is described as the quantity of heat wanted to show 1 g of a liquid into a vapor, with out a upward thrust withinside the temperature of the liquid. The Heat of Vaporization (additionally referred to as the Enthalpy of Vaporization) is the warmth required to result in this segment change. Heat imparts strength into the gadget to conquer the intermolecular interactions that maintain the liquid collectively to generate vapor. The heat of vaporization of water is 2,260 kJ/kg, that's same to 40.8 kJ/mol. The vaporization is the other system of condensation. The warmness of condensation is described as the warmth launched whilst one mole of the substance condenses at its boiling factor below preferred pressure.
Thus, a is the correct option.
To learn more about heat of vaporization check the link below:
https://brainly.com/question/26306578
#SPJ4
what is the ka of an unknown weak acid ha, at 25°c, if the ph of a 2.5 × 10-2 m solution of the acid was measured and found to be 4.94?
The correct answer is that the Ka of unkonwn weak acid Ha, at 25°c, if the pH of a 2.5x10^-2m solution of the acid was measured and found to be 4.94 is 52.9x10^-10
The acid dissociation constant determines the difference between strong and weak acids (Ka). The acid dissociates more as Ka increases. Strong acids must thus dissociate more in water. A weak acid, on the other hand, is less likely to ionise and release a hydrogen ion, which results in a less acidic solution.Salt and acid are in a 1/5 to 4/5 ratio. In today's experiment, you will first determine Ka of an unidentified acid by measuring the pH of the pure acid (no salt present). Titrating the acid is the next step to figure out how much base is needed to totally neutralize it. For each answer, you will calculate Ka.
To learn more about Ka click on the ink below
brainly.com/question/29653757
#SPJ4
Which, if any, of the organisms represented by the fossils may be from species that are now extinct? Explain.
The fossils can tell us about the age of species and the ones that mayt now be extinct.
Can fossils tell us what species may be extinct?Your question is incomplete but let us look at the role of fossils in the study of species.
Fossils can provide evidence about species that have gone extinct. Fossils are the remains or impressions of ancient plants or animals that have been preserved in rock or other geological materials. By studying fossils, scientists can learn about the species that lived in the past, their anatomy, and their behavior.
If a species has not been found as a fossil for a certain period of time, and no living individuals of that species have been found, it is considered to be extinct. This information can be used to infer the extinction of species over time.
Learn more about fossils:https://brainly.com/question/14988327
#SPJ1
what is the value of q (kj) when 8.29 g of water vaporizes at 373 k? the enthalpy of vaporization of water at 373 k is 40.7 kj/mol.
The enthalpy of vaporization (ΔHvap) of water at 373 K is given as 40.7 kJ/mol. To calculate the heat (q) involved in the vaporization of 8.29 g of water, we need to know the number of moles of water present in this mass.
The molar mass of water is 18.015 g/mol, so the number of moles of water in 8.29 g can be calculated as follows:
n = m / M = 8.29 g / 18.015 g/mol = 0.460 mol
Next, we can calculate the heat (q) involved in the vaporization of 0.460 mol of water using the equation q = n ΔHvap:
q = n ΔHvap = 0.460 mol × 40.7 kJ/mol = 18.7 kJ
So, the heat involved in the vaporization of 8.29 g of water at 373 K is 18.7 kJ.
calculate the molarity of a 10.0% (by mass) aqueous solution of hydrochloric acid. question 5 options: 3.04 m 2.74 m 0.274 m 4.33 m the density of the solution is needed to solve the problem.
The molarity of the 10.0% (by mass) aqueous solution of HCl is [tex]3.04M[/tex]
The molarity of a 10.0% (by mass) aqueous solution of hydrochloric acid (HCl) can be calculated using the following equation:
Molarity =[tex]\frac{(mass of solute (g)) }{(molar mass of solute (g/mol) * volume of solution (L))}[/tex]
Given that the density of the solution is 1 g/mL, we can calculate the volume of the solution as follows:
Volume of solution (L) =[tex]\frac{Mass of solution (g) }{Density of solution (g/mL)}[/tex]
For a 10.0% (by mass) aqueous solution of hydrochloric acid (HCl), the molar mass of the solute is 36.46 g/mol.
Therefore, the molarity of the 10.0% (by mass) aqueous solution of HCl can be calculated as follows:
Molarity =[tex]\frac{(10 g) }{(36.46 g/mol * 0.01 L)}[/tex]
Molarity = [tex]3.04 M[/tex]
learn more about molarity refer:brainly.com/question/8732513
#SPJ4
complete question:Calculate The Molarity Of A 10.0% (By Mass) Aqueous Solution Of Hydrochloric Acid (HCI). (Density Of Solution Is 1g/ML) : a.3.04 m b.2.74 m c.0.274 m d.4.33 m
Which graph best shows the general effect that differences in elevation above sea level have on the average annual temperature?
Differences in elevation above sea level can have a significant impact on the average annual temperature in a given location.
How does differences in elevation above sea level affect the average annual temperature?The question is incomplete hence I will approach it generally.
Differences in elevation above sea level can have a significant impact on the average annual temperature in a given location. This is because temperature decreases with increasing altitude due to several factors, including changes in air pressure, moisture content, and the amount of solar radiation received.
At higher elevations, air pressure decreases, which causes the air to expand and cool. Additionally, the moisture content of the air decreases with altitude, which reduces the amount of heat absorbed by the air. Finally, at higher elevations, the atmosphere is thinner, and less of the sun's energy is absorbed, leading to lower temperatures.
Learn more about sea level:https://brainly.com/question/28229060
#SPJ1
Classify each peptide chain as part of a parallel β sheet, part of an antiparallel β sheet, either type of β sheet, or not part of a β sheet.
The structural shape of a peptide chain in which it establishes hydrogen bonds with other peptide chains in the same direction is referred to as being part of a parallel "sheet."
A parallel sheet is a common secondary structural component of proteins that consists of a row of neighbouring peptide strands stacked one on top of the other, with each strand being made up of a stretched-out, elongated polypeptide chain. In this conformation, adjacent strands are parallel to one another and establish hydrogen bonds with the same direction between the backbone atoms of each strand. The name "pleated sheet" derives from the distinctive pattern of alternating up-and-down twists that results from this orientation of the strands. In comparison to antiparallel sheets, parallel sheets typically feature grooves between neighbouring strands that are longer and shallower. Between the amino acid residues inside and between the strands, hydrogen bonds and van der Waals interactions help to sustain this structural configuration.
Learn more about parallel sheet here:
https://brainly.com/question/18121190
#SPJ4
what piece of lab equipment would you use to estimate the volume of a drop of water?
Answer:
a graduated cylinder
Explanation:
the graduated cylinder is the lab tool used to measure the volume of any liquid <3
is the mechanism no 1 cl2 h k1 nocl2 nocl2 1 no h k2 2nocl consistent with the results obtained in exercise 31? if so, which step is the rate-determining step?
Is mechanism no. 1 NO+Cl₂→ NOCI₂, NOCI₂+NO→2NOCI consistent with the outcomes of exercise number 31. Rate = K[NO]² [C1₂] is the process that decides the rate.
The intricate procedures by which chemical substances are changed into other substances are known as reaction mechanism in chemical reactions. The actual reactions themselves might entail interactions between atoms, molecules, ions, electrons, and free radicals and could happen in solids, gases, liquids, or at the boundaries between any of these.
Examining the intricate workings of reaction mechanisms is crucial since it aids in understanding and managing chemical reactions, among other things. It is possible for many reactions of significant commercial importance to proceed along more than one reaction path. By understanding the underlying reaction mechanisms, it may be possible to select conditions that favor one reaction path over another, resulting in maximum amounts of desired products and minimal amounts of unwanted products. Additionally, based on how people respond.
Learn more about mechanism here:
https://brainly.com/question/14529649
#SPJ4
The complete question is:
The reaction between NO and Cl₂ takes place in the following two steps:
I. NO+Cl₂→ NOCI₂
II. NOCI₂+NO→2NOCI
2NO+Cl₂→2NOClThe rate law of overall reaction, 2NO+Cl₂→2NOCl ,can be given by:
A. Rate = K[NO]² [C1₂]
B. Rate = K[NO][CI₂]
C. Rate = K[NOC1][NO]
D. Rate = K[NO][CI₂]²
Drs. Avery, MaCleod, and McCarty used the enzyme _____________ to remove the proteins from the cell extracts. Question 7 options:
protease
DNase
RNase
All answers are correct
No answers are correct
Drs. Avery, MacLeod, and McCarty used the enzyme protease to remove the proteins from the cell extracts." Therefore, the correct answer is the first option.
Proteases are enzymes that break down proteins into smaller peptides or amino acids. This is important for the digestion of food and the regulation of many cellular processes. Drs. Avery, MacLeod, and McCarty used protease to remove the proteins from the cell extracts in order to isolate and study the DNA in their experiments. This was a crucial step in their research, which helped to establish that DNA is the genetic material of the cell.
Learn more about protease enzyme at https://brainly.com/question/28823660
#SPJ11
a tire contains 1.50 mol of air at a gauge pressure of 205 kpa . if the volume of the air in the tire is 0.0120 m3 , what is its temperature?
The air within the tyre is 245 K degrees.
How is gauge determined?Gauge is (100) x (mils), therefore 0.3 mils, for instance, is 30 gauge. You multiply mils by 25.4 to convert from mils to microns. Solve For measuring plastic film, technology creates thickness gauging technology.
The ideal gas law that must be solved to determine the air temperature inside the tyre
PV = nRT where P is the gauge pressure, V is the volume, n is the number of moles, R is the gas constant, and T is the temperature.
Assuming standard atmospheric pressure of 101.3 kPa, the absolute pressure is:
P = 205 kPa + 101.3 kPa = 306.3 kPa
We can now enter the values into the ideal gas law as follows:
PV = nRT
Rearranging to solve for T, we get:
T = PV / nR
Substituting the values and using the gas constant R = 8.31 J/(mol K), we get:
T = (306.3 kPa)(0.0120 m^3) / (1.50 mol)(8.31 J/(mol K))
T = 245 K
To know more about gauge pressure visit:-
https://brainly.com/question/28504340
#SPJ1
The table below represents three trials of the initial
concentrations of reactants "A" and "B" in units of molarity
(M) versus the initial rate of reaction in units of (M-min-¹).
What is the overall order of this reaction?
Trial
[A]
1
0.20M
2
0.20M
3 0.40M
[B]
0.20M
0.40M
0.20M
Initial Rate
0.4 M/min
1.6 M/min
0.8 M/min
The overall order of the reaction is 3.
What is Order of Reaction?
The order of a chemical reaction refers to the number of molecules or atoms involved in the rate-determining step of the reaction. It is a measure of the relationship between the concentration of the reactants and the rate of reaction. The order of a reaction can be determined experimentally by measuring the initial rates of the reaction at different concentrations of the reactants.
The order of a reaction is the sum of the exponents of the concentration terms in the rate law equation.
Let's write the rate law equation for this reaction as:
rate = k[A]^x[B]^y
where k is the rate constant and x and y are the orders of the reaction with respect to A and B, respectively.
Using the given data, we can determine the values of x and y.
For Trial 1: rate = k(0.20)^x(0.20)^y = 0.4
For Trial 2: rate = k(0.20)^x(0.40)^y = 1.6
For Trial 3: rate = k(0.40)^x(0.20)^y = 0.8
Dividing Trial 2 by Trial 1, we get:
(0.20/0.20)^y = 4
y = 2
Dividing Trial 3 by Trial 1, we get:
(0.40/0.20)^x = 2
x = 1
Therefore, the overall order of the reaction is:
x + y = 1 + 2 = 3
So, the overall order of the reaction is 3.
Learn more about Order of Reaction from given link
https://brainly.com/question/28179168
#SPJ1
As a substance undergoes a change from the solid to the liquid phase, at constant the. Temperature, the average kinetic energy of it's molecules?
As a substance undergoes a change from the solid to the liquid phase at constant temperature, the average kinetic energy of its molecules increases.
The relationship between a molecule's average kinetic energy and absolute temperature is as follows: K = 1 2 m v 2 and K = 3 2 k B T. The average kinetic energy of a substance's particles is directly inversely correlated with its temperature. As the temperature rises, the particles must move more quickly because their mass is constant. The heat that is applied when a substance is heated to a constant temperature (i.e., during the phase change state) causes the vibrating molecules to gain potential energy to dissipate the intermolecular force of attraction and move around freely. The potential energy therefore rises as a result.
Learn more about kinetic energy here:
https://brainly.com/question/26472013
#SPJ4
I am doing feeding yeast experiment with balloons. And I need to know if normal sugar, brown sugar, and diet sugar have a different ph level, and if one of them will affect the most.
The pH level of a solution is a measure of its acidity or alkalinity. In general, the higher the pH level, the more basic (alkaline) the solution. Different sugars can have different effects on the pH level of a solution.
What is acidity?Acidity is a measure of the concentration of hydrogen ions (H+) in a solution. It's measured by the pH scale, which ranges from 0 to 14. Acids have a pH value of less than 7, while bases have a pH value greater than 7.
Normal sugar (sucrose) has a neutral pH of 7, meaning it does not have an effect on the pH level of a solution. Brown sugar, on the other hand, is slightly acidic with a pH of about 5.5. Diet sugar, such as aspartame and saccharin, is even more acidic, with a pH of 3.5 or lower.
When performing the yeast experiment with balloons, the type of sugar used can have an effect on the pH level of the solution. The most acidic sugar, diet sugar, will have the greatest effect on the pH level, as it will lower the pH of the solution. This could potentially affect the yeast activity and the rate at which the balloons inflate.
To learn more about acidity
https://brainly.com/question/172153
#SPJ1
what is the correct name for the compound with the formula nh4no2?
The name for the compound with the formula NH4NO2 is ammonium nitrite.
This is an inorganic compound that is made up of ammonium cation (NH4+) and nitrite anion (NO2-). It is a white crystalline solid that is highly soluble in water and decomposes at temperatures above 60°C. Ammonium nitrite is used in various industrial processes, including in the production of dyes, pharmaceuticals, and explosives. It is also used as a reagent in organic chemistry reactions. While ammonium nitrite is not considered as a highly dangerous compound, it can decompose into toxic nitrogen oxides when heated, so appropriate safety precautions must be taken when handling it.Ammonium nitrite (NH4NO2) is a colorless, crystalline solid compound that is soluble in water. It is an unstable compound that is used in the production of nitrogen gas and as a reagent in organic chemistry. When heated, ammonium nitrite decomposes into nitrogen gas and water, making it a potential source of nitrogen gas for various industrial and chemical processes. However, ammonium nitrite is a hazardous and unstable compound that can undergo explosive decomposition when subjected to heat, shock, or friction, making it dangerous to handle and store. As a result, it is heavily regulated and restricted for use in many countries.
Learn more about ammonium nitrite here:
https://brainly.com/question/1111916
#SPJ4
e) as the reaction occurs at constant temperature, does the pressure inside the container increase, decrease, or remain the same? explain.
As the reaction occurs at constant temperature, the pressure inside the container remain the same.
What is pressure?Pressure is defined as the force was applied perpendicular to an object's surface per unit area across which that force is dispersed. 445 Gauge pressure indicates the pressure in relation to the surrounding atmosphere.
Pressure is expressed using a variety of units. Some of these stem from a unit of forces exerted by an area unit. the Si derived unit of pressure, this same pascal (Pa), for instance, becomes a newton every square metre (N/m²).
P×V = n×R×T
As the reaction occurs at constant temperature, the pressure inside the container remain the same.
Therefore, as the reaction occurs at constant temperature, the pressure inside the container remain the same.
To know more about pressure, here:
https://brainly.com/question/29341536
#SPJ1
which set of three quantum numbers does not specify an orbital in the hydrogen atom?
The set of quantum numbers that does not specify an orbital in the hydrogen atom is n = 3; l = 3; m = -2.
The first or principle quantum number (n) represents the major energy level the electron is in. The second azimuthal quantum number (?) represents the type of sublevel the electron is in. The third quantum number, called the magnetic quantum number, described the spatial orientation of the orbital in the sublevel, The fourth quantum number, called the spin quantum number, described whether the electron was the first (+1/2) or second (-1/2) to enter the orbital.
Values for all quantum numbers derive from the principle quantum number.
n = energy level number (1,2,3,4,etc)
? = sublevel type, values are( 0, n-1)...3rd energy level has 0(s), 1(p), and 2(d) type sublevels
m = orbital, values are -?..0..+?...a 3d sublevel has (-2, -1, 0, +1, +2) type orbitals
s = +1/2 for first to enter orbital. -1/2 for second to enter orbital.
Since, range of L=(0,n-1),
and given n=3, L must be in (0,2).
Learn more about quantum numbers from the link given below.
https://brainly.com/question/16979660
#SPJ4
In one to two sentences, explain why there is more concern about pollutants in the air during cold months
Air pollution worsens in winter as cold and dry air contains more pollutants. This makes it easy for pollutant air near the surface of the earth to rise and be lifted away.
As a result of the presence of compounds in the atmosphere that are hazardous to human health and the health of other living things, or that impair the climate or materials, air pollution is the contamination of the air.
It is known that cold air usually sinks and warm air usually rises. Most of the time, temperature decreases with elevation. This makes it easy for pollutant air near the surface of the earth to rise and be lifted away.
However, during winter, thermal inversions are more likely to happen. Because sunlight is weaker during this season, air near the earth’s surface may end up being cooler than the air above, causing the pollution-filled air near to earth's surface. Hence, Colder air traps more pollution.
It is also true that rain can wash away pollutants. But in the dry winter season, due to less humidity in the air, the chances of rainfall are generally lower. Hence, dry air contains more pollutants. Therefore, air pollution is worse in winter.
Learn more about air pollution here: https://brainly.com/question/15158482
#SPJ4
indentify the type of scientific knowledge represented by each statement lol theory hypothesis
1. The Earth revolves around the Sun. Theory: This is a scientific theory, which is an explanation supported by a large body of evidence that explains how a natural phenomenon or phenomenon works.
What is theory?A theory is an explanation or principle that is based on observations, experiments, and logical reasoning. It is an organized system of ideas, concepts, and principles intended to explain how something works or why something happens. Theories are used to explain and predict phenomena and can be used to develop hypotheses, which can then be tested to gain a better understanding of the natural or social world. Theories can be used to understand and explain a wide variety of phenomena in the natural and social sciences, including the behavior of particles, the functioning of the human body, and the social dynamics of large groups of people.
To learn more about theory
https://brainly.com/question/16805203
#SPJ1
Descripe the procedure to seperate copper and zinc powders
Answer:
2 different ways, color and acid
Explanation:
Copper and zinc powder can be separated based on the colours; copper metal is red and zinc is grey in colour. The other method is to dissolve zinc powder in an acid,then filter copper from zinc chloride, while copper don't react with the acid because it is low in the reactivity series than hydrogen.
david decides that it is better to create a blend containing 43% nacl, 33% kcl and 24% cacl2, than to buy the pre-prepared blend. calculate how much it will cost to produce 65 tons of his recommended blend.
The overall cost of creating 65 tonnes of David's suggested mix, which contains 43% NaCl, 33% KCl, and 24% CaCl2, is $2,795 plus $3,217.5 plus $3,120, which comes to $9,132.5.
We need to know the price of each salt per tonne in order to determine the cost of creating 65 tonnes of David's suggested salt mixture, which contains 43% NaCl, 33% KCl, and 24% CaCl2. Assume that the price of NaCl, KCl, and CaCl2 are each $100 per tonne, $150 for KCl, and $200 for CaCl2.
We can now determine the blend's overall cost. It will cost $2,795 for 27.95 tonnes of NaCl at a price of $100 per tonne. It will cost 21.45 tonnes of KCl at a price of $150 per tonne, or $3,217.5. It will cost $15.6 tonnes x $200 per tonne ($3,120) for CaCl2.
David's suggested mix may be produced for 65 tonnes at a total cost of $2,795 + $3,217.5 + $3,120 = $9,132.5.
learn more about KCl here:
https://brainly.com/question/4836100
#SPJ4
what type of bonding involves de-localized electrons?
Covalent bonding can result in de-localized electrons, such as in metallic bonding where atoms share valence electrons, or in conjugated systems in organic molecules.
Valence electrons are the outermost electrons in an atom and are responsible for the chemical properties of the element. They are located in the highest energy level or valence shell of an atom and determine how that atom interacts with other atoms. For example, atoms with a full valence shell, such as the noble gases, are generally unreactive, whereas atoms with incomplete valence shells, such as the halogens, are highly reactive and tend to form chemical bonds with other atoms to achieve a full valence shell. Valence electrons can be shared or transferred between atoms, which leads to the formation of chemical bonds, including ionic bonds, covalent bonds, and metallic bonds. Understanding the properties and behavior of valence electrons is essential for predicting and explaining the chemical properties of different elements and compounds.
Learn more about valence electrons here:
https://brainly.com/question/28977387
# SPJ4
If 18 grams of carbon react with oxygen to produce carbon dioxide, How many molecules of Carbon molecules of oxygen would be required?
a. 1.5 molecules
c. 9.0 X 102 molecules
d. 3.2 X 10 molecules
b. 48 molecules
The number of molecules of carbon molecules of oxygen that would be required is 9.03 × 10²³ molecules.
How to calculate number of molecules?The number of molecules of a substance can be calculated by multiplying the number of moles by Avogadro's number as follows:
no of molecules = no of moles × 6.02 × 10²³
According to this question, if 18 grams of carbon react with oxygen to produce carbon dioxide. The number of moles of carbon can be calculated as follows:
no of moles of carbon = 18g ÷ 12g/mol = 1.5 moles
no of molecules = 1.5 moles × 6.02 × 10²³
no of molecules = 9.03 × 10²³ molecules
Learn more about no of molecules at: https://brainly.com/question/28319191
#SPJ1
