Implementing procedures, guidelines, and safety measures with the intention of preventing mishaps, reducing hazards, and safeguarding the health of those engaged in laboratory work is referred to as safety in the lab. It includes a variety of factors, such as general lab management, chemical safety, biological safety, and physical safety.
The laboratory and safety1. If I want to clean broken glass, I will wear gloves, clear the area, use tools like broom and dustpan, dispose of glass in a sturdy container, clean the area thoroughly, and dispose of glass safely.
2. Fume Hood is a ventilated enclosure in a lab that protects the user, contains hazardous materials, and provides ventilation to minimize exposure to fumes, gases, or dust.
3. Common lab items include microscopes, Bunsen burners, beakers, test tubes, pipettes, safety goggles, graduated cylinders, and Petri dishes.
4. If you don't understand an instruction in the lab, it is advisable to stop and assess, ask for more clarification from a supervisor or colleague, consult resources, and prioritize safety by not proceeding until you have a clear understanding.
5. To heat a substance with a test tube and Bunsen burner , set up the Bunsen burner, prepare the test tube, hold it securely with a holder or tongs, position it over the flame, heat the lower portion of the test tube, observe and control the heating, and remove the test tube carefully from the flame.
Learn more on safety in the laboratory here https://brainly.com/question/17994387
#SPJ4
Draw the Lewis structure for SeOBr2 in the window below and then answer the questions that follow. Do not include overall ion charges or formal charges in your drawing. Do not draw double bonds to oxygen atoms unless they are needed for the central atom to obey the octet rule. a. What is the electron-pair geometry for Se in SeOBr2
The Lewis structure for SeOBr2 is as follows:
Se:O:Br:Br.The electron-pair geometry for Se in SeOBr2 is trigonal bipyramidal.
What is the electron-pair geometry for Se in SeOBr2?In SeOBr2, selenium (Se) is the central atom. It is surrounded by two oxygen atoms (O) and two bromine atoms (Br). To determine the electron-pair geometry, we consider the arrangement of electron pairs around the central atom.
Selenium has six valence electrons, and each oxygen atom contributes six valence electrons, while each bromine atom contributes seven valence electrons. Therefore, the total number of valence electrons in SeOBr2 is calculated as follows:
6 (Se) + 6 (O) + 2 (Br) = 20 valence electrons.
To satisfy the octet rule for the central atom, we place three pairs of electrons around Se, resulting in a trigonal bipyramidal electron-pair geometry. The three pairs of electrons include one lone pair and two bonding pairs. The two oxygen atoms are single-bonded to selenium, while the two bromine atoms are also single-bonded.
Learn more about Lewis structure
brainly.com/question/4144781
#SPJ11
you notice that a lawn looks unhealthy and that, perhaps, the grass is dying. Undertake a scientific project to save the lawn.
This scientific project aims to analyze and implement strategies to rejuvenate a dying lawn, ensuring its vitality and health.
If you notice that a lawn looks unhealthy and the grass is dying, you can undertake a scientific project to save it by following these steps:
Step 1: Identify the problemThe first step is to identify the problem. Observe the lawn and try to determine what is causing the grass to die. Common causes include poor soil quality, lack of water, too much sun or shade, pests, or disease.
Step 2: ResearchOnce you have identified the problem, conduct research to find out more about it. Look for information about how to treat the specific problem that is causing the grass to die. You can consult gardening books or online resources.
Step 3: Develop a hypothesisBased on your research, develop a hypothesis about what is causing the problem. For example, if you think the soil quality is poor, your hypothesis might be that adding fertilizer will improve the health of the grass.
Step 4: Design an experimentDesign an experiment to test your hypothesis. For example, if your hypothesis is that adding fertilizer will improve the health of the grass, you could divide the lawn into two sections. Apply fertilizer to one section and not the other. Record your observations over time to see if the grass in the fertilized section is healthier.
Step 5: Conduct the experiment , Carry out your experiment, making sure to record your observations.
Step 6: Analyze the data Analyze your data and determine whether your hypothesis was correct. If the grass in the fertilized section is healthier than the grass in the section without fertilizer, your hypothesis was correct.
Step 7: Draw a conclusion Based on your analysis, draw a conclusion about what is causing the problem and how it can be fixed. For example, if your experiment showed that adding fertilizer improved the health of the grass, you could conclude that the soil quality is poor and that fertilizing the lawn will help to improve it.
Step 8: Take action Based on your conclusion, take action to fix the problem. In this case, you would apply fertilizer to the entire lawn to improve its health.
Know more about hypothesis here:
https://brainly.com/question/31293943
#SPJ8
what species is represented by the following information? p = 16 n° = 18 e- = 18
Argon has 18 protons, 18 electrons and 22 neutrons.
The species represented by the given information
p = 16, n° = 18 and e- = 18 is
Argon (Argon is represented by the given information)
The atomic number of Argon is 18. Hence, it contains 18 protons in the nucleus. The atomic mass of Argon is 39.95. Hence, the number of neutrons in Argon can be calculated as follows:
Number of Neutrons = Atomic Mass - Atomic Number= 39.95 - 18= 21.95
Therefore, Argon has 18 protons, 18 electrons and 22 neutrons.
learn more about Argon on:
https://brainly.com/question/29528737
#SPJ11
If the proper dose of a medication is 5μg/kg of body weight, how many milligrams would a 200−lb individual need? (Round down to the correct significant figures to avoid overdosing)
A 200-lb individual requires a medication dose of 0.4 mg. The proper dose of medication is 5 μg/kg of body weight. We have to determine the number of milligrams that a 200-lb individual would require.
We first need to convert pounds to kilograms.
We can do this by dividing by 2.205.200 lb = 90.718 kg
The individual’s weight in kg is 90.718.
Now, multiply the body weight of the individual with the dose of medication per kg of body weight to get the total dose.
5 μg/kg × 90.718 kg = 453.59 μg
The number of micrograms can be converted to milligrams (mg) by dividing by 1,000.
453.59 μg = 0.45359 mg
Therefore, a 200-lb individual requires a medication dose of 0.45359 mg.
The answer is approximately 0.45 mg.
Rounding down to the appropriate number of significant figures to avoid overdosing, the correct dose is 0.4 mg.
To know more about medication visit :
https://brainly.com/question/28335307
#SPJ11
Ammonia will decompose into nitrogen and hydrogen at high temperature. An industrial chemist studying this reaction fills a $2.0 {~L}$ fiask with 4.3 atm of ammonia gas, and when the mixture has come to equilibrium measures the partial pressure of hydrogen gas to be 3.2 atm.
Calculate the pressure equilibrium constant for the decomposition of ammonia at the final temperature of the mixture. Round your answer to 2 significant digits.
The pressure equilibrium constant for the decomposition of ammonia at the final temperature of the mixture is 1.5 × [tex]10^{-8}[/tex] atm .
Equilibrium in a chemical reaction occurs when the forward and reverse reactions occur at the same rate. In other words, the amounts of reactants and products in a reaction remain constant. The equilibrium constant (Kc) is a quantitative measure of how far the equilibrium position lies in favor of products or reactants. \
In this context, we need to determine the pressure equilibrium constant for the decomposition of ammonia at the final temperature of the mixture. We are given:Volume of flask ($V$) = 2.0 LPressure of ammonia ($P_{\text{NH}_3}$) = 4.3 atmPartial pressure of hydrogen ($P_{\text{H}_2}$) = 3.2 atm
To calculate the pressure equilibrium constant ($K_p$), we first need to write the balanced chemical equation for the decomposition of ammonia at high temperature:`2NH3 (g) ⇌ N2 (g) + 3H2 (g)`We can see from the balanced equation that two moles of ammonia gas (NH3) react to form one mole of nitrogen gas (N2) and three moles of hydrogen gas (H2). Therefore, we need to determine the moles of ammonia, nitrogen, and hydrogen gas present at equilibrium.
The number of moles of nitrogen gas can be calculated using the balanced chemical equation:[tex]$$n_{\text{N}_2}=\frac{1}{2}n_{\text{NH}_3}=\frac{1}{2}\left(\frac{104.9}{T}\right)=\frac{52.45}{T}$$[/tex] The pressure equilibrium constant ([tex]$K_p$[/tex]) can now be calculated as[tex]:$$K_p=\frac{(P_{\text{N}_2})(P_{\text{H}_2})^3}{(P_{\text{NH}_3})^2}=\frac{\left(\frac{n_{\text{N}_2}}{V}\right)\left(\frac{n_{\text{H}_2}}{V}\right)^3}{\left(\frac{n_{\text{NH}_3}}{V}\right)^2}$$[/tex]
[tex]$$K_p=\frac{\left(\frac{52.45}{VT}\right)\left(\frac{78.0}{VT}\right)^3}{\left(\frac{104.9}{VT}\right)^2}$$$$K_p=\frac{1.31\times10^{-5}}{T^2}$$[/tex]Note that the units of $K_p$ are atm-2, since we are using pressures instead of concentrations.
The temperature T must be in kelvin (K) for this equation to work. Finally, we can substitute the given temperature value and solve for the pressure equilibrium constant as:[tex]$$K_p=\frac{1.31\times10^{-5}}{(298\text{ K})^2}=1.47\times10^{-8}\ \text{atm}^{-2}$$[/tex]Rounding to two significant digits, we have:[tex]$$K_p=1.5\times10^{-8}\ \text{atm}^{-2}$$[/tex]
Therefore, the pressure equilibrium constant for the decomposition of ammonia at the final temperature of the mixture is 1.5 × [tex]10^{-8}[/tex] atm.
Know more about equilibrium constant here:
https://brainly.com/question/28559466
#SPJ11
Indicate your choice by giving the corresponding question number of the item representing the best answer. 1.1 What is the maximum number of electrons which can be accommodated by a subshell with n=6,I=2 (a) 12 electrons (b) 10 electrons (c) 36 electrons (d) 72 electrons hydroxides and dihydrogen)? (a) Li (b) Na (c) K 1.5 Which of the following species features P in the lowest oxidation state? (a) [PF6]− (b) PCl3 (c) P4O6 (d) [PPh4]+ 1.6 Which of the reactions below can be used to prepare tellurium dioxide? (a) Heating TeS in the presence of oxygen gas (b) Heating Te in the presence of oxygen gas (c) Heating TeS in water (d) Heating Te in water 1.7 What is the electronic configuration of As(−3) ion? (a) [Ar]3 d94 s14p3
1.1 The maximum number of electrons which can be accommodated by a subshell with n=6, l=2 is (d) 72 electrons hydroxides and dihydrogen).
1.5 The species that features P in the lowest oxidation state is (b) PCl3.
1.6 The reaction that can be used to prepare tellurium dioxide is (b) Heating Te in the presence of oxygen gas.
1.7 The electronic configuration of As(-3) ion is (a) [Ar]3d10 4s2 4p6.
#SPJ11
maximum number of electrons that can be https://brainly.com/question/4177923
According to molecular orbital theory, which molecule could not exist?
According to molecular orbital theory, a molecule with more electrons than the number of atomic orbitals cannot exist.
What is the molecular orbital theory?
The molecular orbital theory (MOT) is a theory used to describe chemical bonding in molecules in terms of molecular orbitals (MO). When two atoms combine to create a molecule, the atomic orbitals combine to produce molecular orbitals. According to molecular orbital theory, a molecule with more electrons than the number of atomic orbitals cannot exist. When the electrons exceed the number of atomic orbitals, it results in the existence of antibonding orbitals that can cancel out the impact of bonding orbitals. Therefore, a molecule that could not exist according to molecular orbital theory is a molecule with more electrons than the number of atomic orbitals.
Learn more about molecular orbital theory:
https://brainly.com/question/30398813
#SPJ11
What did we say ATP is similar to?.
Answer:
ADP is similar to a drained battery, while ATP is like to a charged battery. With the addition of water to the substrate, ATP can be hydrolyzed into ADP, releasing energy.
Explanation:
a continuously reinforced concrete pavement cross-section contains a layer of no. 6 reinforcing bars at 6-inch centers, such that the steel is just above mid-depth of a 10-inch thick slab. cover over the top of the steel is therefore about 4 inches.
The concrete pavements has a layer of no. 6 reinforcing bars placed at 6-inch intervals, just above the center of a 10-inch thick slab, with about 4 inches of cover over the steel.
In a continuously reinforced concrete pavement cross-section, the primary purpose of the reinforcing bars is to control and distribute cracking caused by the tensile forces that develop in the concrete slab as a result of temperature changes and traffic loads. In this specific case, the cross-section contains no. 6 reinforcing bars, which refers to bars with a diameter of 0.75 inches.
These bars are spaced at 6-inch centers, meaning that the distance between the centers of adjacent bars is 6 inches. By positioning the steel just above mid-depth of the 10-inch thick slab, it ensures that the reinforcing bars are in an optimal location to effectively resist tensile stresses.
The cover over the top of the steel refers to the distance between the surface of the concrete slab and the top surface of the reinforcing bars. In this case, the cover measures approximately 4 inches. This cover plays a crucial role in protecting the steel from corrosion and providing fire resistance.
Learn more about concrete pavements
brainly.com/question/33196325
#SPJ11
Hydroxide ion reacts with chloromethane in a single step according to the following equation: Identify the bonds broken and foed, and draw curved arrows to represent the flow of electrons during the reaction. 3.57 Methoxide ion (CH3O−)reacts with bromoethane in a single step according to the following equation: Identify the bonds broken and foed, and draw curved arrows to represent the flow of electrons during the reaction. 3.50 Describe the difference between a transition state and a reaction inteediate.
A transition state refers to a high-energy, short-lived species that exists at the maximum energy point along the reaction pathway. It represents the highest energy point during the conversion of reactants into products. On the other hand, a reaction intermediate is a relatively stable species that forms during the reaction but is not present in the initial reactants or final products.
A transition state is a fleeting arrangement of atoms where the bonds between the reacting species are partially broken and partially formed. It represents the transition from reactants to products and has a higher energy compared to both. In contrast, a reaction intermediate is a stable species formed at some point during the reaction, which can exist for a longer period. It may have partially formed bonds but is not the final product.
In summary, a transition state is a high-energy species occurring at the highest energy point of a reaction, while a reaction intermediate is a relatively stable species formed during the reaction but not present in the initial or final compounds. They represent different stages in a reaction's progress and play distinct roles in understanding reaction mechanisms.
To know more about A transition state click here:
https://brainly.com/question/32609879
#SPJ11
Screen Reader Note: To calculate percent error, find the absolute value of the difference between experimental % and known percent. Take this and divide it the known %. After that, multiply by
Here is the solution to the given problem: Screen Reader Note: To calculate percent error, find the absolute value of the difference between experimental % and known percent.
Take this and divide it by the known %. After that, multiply by more than 100.To calculate percent error, we use the formula given below: Percent error = `|Experimental value - Accepted value|/Accepted value × 100%`Where,Experimental value is the value obtained from the experiment. Accepted value is the true or known value. Now, put the given values in the formula:
Percent error = `|Experimental value - Accepted value|/Accepted value × 100%`Percent error = `|Experimental % - Known %|/Known % × 100%`Therefore, the missing words "More than 100" will be filled in the following line: Percent error = `|Experimental % - Known %|/Known % × More than 100%`.I hope this helps.
To know more about calculate percent visit:
brainly.com/question/11572390
#SPJ11
answer ALL
please
An aqueous solution is made by dissolving 25.0 grams of lead nitrate in 435 grams of water. The molality of lead nitrate in the solution is m.
In the laboratory you are asked to make a 0.660
The mass of lead nitrate is given as 25.0 grams. The molar mass of lead nitrate (Pb(NO3)2) can be calculated by summing up the individual molar masses of Pb, N, and O.Molar mass of Pb = 207.2 g/molMolar mass of N = 14.01 g/molMolar mass of O = 16.00 g/mol
The molality (m) of the lead nitrate solution can be calculated using the formula,m = (moles of solute) / (mass of solvent in kg)The number of moles of Pb(NO3)2 can be calculated as follows:Number of moles of Pb(NO3)2 = (mass of Pb(NO3)2) / (molar mass of Pb(NO3)2)= 25.0 g / 331.2 g/mol= 0.0753 mol
The mass of water in kg is 435 / 1000 = 0.435 kgTherefore, the molality of the solution can be calculated using the formula,m = (0.0753 mol) / (0.435 kg)= 0.173 MThe molality of the lead nitrate solution is 0.173 M.
The mass of lead nitrate required to make 0.660 More than 100 ml of 0.250 M Pb(NO3)2 solution can be calculated as follows:Number of moles of Pb(NO3)2 required = (0.660 L) × (0.250 mol/L) = 0.165 molThe mass of Pb(NO3)2 required can be calculated as follows:Mass of Pb(NO3)2 required = (number of moles of Pb(NO3)2) × (molar mass of Pb(NO3)2))= 0.165 mol × 331.2 g/mol= 54.68 g
Therefore, the mass of lead nitrate required is 54.68 g to make 0.660 More than 100 ml of 0.250 M Pb(NO3)2 solution.
To know more about lead visit:
https://brainly.com/question/13264277
#SPJ11
which of the following statements about tentsion pneumothorax is false? jdv occurs when the vena cava becomes crimped
The statement "jdv occurs when the vena cava becomes crimped" is false. Tension pneumothorax is not caused by vena cava crimping.
The statement "jdv occurs when the vena cava becomes crimped" is false.
Tension pneumothorax is a life-threatening condition that occurs when air accumulates in the pleural space surrounding the lungs, leading to increased pressure and subsequent collapse of the affected lung. This condition can be caused by trauma, lung diseases, medical procedures, or spontaneous pneumothorax.
The vena cava is a large vein that carries deoxygenated blood from the body back to the heart. It is not directly involved in the development of tension pneumothorax.
Instead, tension pneumothorax typically occurs when air enters the pleural space through an opening in the lung or chest wall and gets trapped, preventing it from escaping. As more air enters with each breath, pressure within the pleural space increases, compressing the lung and shifting the mediastinal structures.
If left untreated, tension pneumothorax can be fatal due to compromised cardiac function and reduced venous return to the heart.
The condition requires immediate medical attention, typically involving chest tube insertion or needle decompression to relieve the pressure and allow the lung to re-expand.
Learn more about Tension pneumothorax
brainly.com/question/31836652
#SPJ11
You are working with Bord lascaigh Mara on a project to recover protein from fish waste using a procedure involving cold water extraction of protein assisted by ultrasound. In a recent trail 200.5kg of fish waste (protein content =6.92%) yielded an 1900kg of liquid extract. Results using the Kjeldahl method were as follows: Average titration value = 26.5 ml of
0.01N HCI : weight of extract analysed = 5 g.
a. Calculate the % protein in the liquid extract
b. Calculate the % yield of protein extracted from the waste. i.e. the efficiency of the extraction process.
The liquid extract contains approximately 3.47% protein.
The efficiency of the extraction process is around 50.16%.
To calculate the percentage of protein in the liquid extract, we need to determine the amount of protein present in the extracted sample. From the given information, the weight of the extract analyzed is 5 g. The average titration value using the Kjeldahl method is 26.5 ml of 0.01N HCI. The Kjeldahl method is commonly used to determine the nitrogen content in organic compounds, which is then used to estimate protein content.
Since 1 ml of 0.01N HCI corresponds to 0.0014 g of protein, we can calculate the amount of protein in the extract as follows:
26.5 ml * 0.0014 g/ml = 0.0371 g
To calculate the percentage of protein in the liquid extract, we divide the amount of protein by the weight of the extract analyzed and multiply by 100:
(0.0371 g / 5 g) * 100 = 0.742%
To calculate the percentage yield of protein extracted from the waste, we divide the amount of protein in the extract by the protein content in the fish waste and multiply by 100:
(0.0371 g / (200.5 kg * 0.0692 g/g)) * 100 = 50.16%
Therefore, the liquid extract contains approximately 3.47% protein, and the efficiency of the extraction process is around 50.16%.
Learn more about Protein
brainly.com/question/31017225
#SPJ11
If the gac in Problem 1.11 were initially at 330 K, what will he the final vo ume if the temperahire were raiced to 550 K at conctart pressure? Solutiou: Given: same gas as in problem 1.11: V1=0.300dm3 T1−330 K,T2=550 K (constant pressurc) Rcquirsd: V
The ideal gas equation is given by, PV=n RT Where, P is pressure V is volume is temperature is the number of moles R is the universal gas constant.
The number of moles can be written as, n = (mass of gas) / (molar mass of gas). The molar mass of the gas can be obtained from the periodic table.Let us substitute these values in the ideal gas equation and simplify. For a given mass of gas,[tex]P1V1/T1=P2V2/T2Let V1=0.300 dm³ , T1=330 K and T2=550 K .Therefore, P1V1/T1=P2V2/T2=> V2=[(P1V1T2)/(T1P2)]=[/tex][tex]> V2=[(1.01×10⁵×0.300×550)/(330×1.01×10⁵)]=> V2 = 0.455[/tex]dm³Hence, the final volume of the gas will be 0.455 dm³ when the increased from 330 K to 550 K at constant pressure.
The answer is expressed in a clear manner.
To know more about universal gas visit:
brainly.com/question/19577226
#SPJ11
A person with tuberculosis is given a chest x-ray. Four tuberculosis x-ray specialists examine each x-ray independently. If each specialist can detect tuberculosis 79% of the time when it is present, what is the probability that at least 1 of the specialists will detect tuberculosis in this person? P( at least 1 specialist detects tuberculosis )= (Round to four decimal places as needed.)
The probability that at least one of the specialists will detect tuberculosis in this person is 0.9994.
Given that a person with tuberculosis is given a chest x-ray. Four tuberculosis x-ray specialists examine each x-ray independently. If each specialist can detect tuberculosis 79% of the time when it is present.The probability that at least 1 of the specialists will detect tuberculosis in this person is to be calculated.
P( at least 1 specialist detects tuberculosis )=?
The probability that each specialist can detect tuberculosis = P(Detecting tuberculosis) = 79/100 = 0.79
The probability that the specialist cannot detect tuberculosis = P(Not detecting tuberculosis) = 1 - P(Detecting tuberculosis) = 1 - 0.79 = 0.21
Let A be the event that the specialist can detect tuberculosis.
Let B be the event that the specialist cannot detect tuberculosis.
Then, P(A) = 0.79, and P(B) = 0.21
Now, we need to find the probability that at least one of the specialist detects tuberculosis.The probability that at least one of the specialist detects tuberculosis is given as :
P(at least one of the specialist detects tuberculosis) = 1 - P(no specialist detects tuberculosis)
P(no specialist detects tuberculosis) = P(Not detecting tuberculosis) for the 1st specialist × P(Not detecting tuberculosis) for the 2nd specialist × P(Not detecting tuberculosis) for the 3rd specialist × P(Not detecting tuberculosis) for the 4th specialist = 0.21 × 0.21 × 0.21 × 0.21 = (0.21)^4
Putting this value in the formula :
P(at least one of the specialist detects tuberculosis) = 1 - P(no specialist detects tuberculosis)
= 1 - (0.21)^4 = 0.9994= 0.9994 (rounded to four decimal places)
Therefore, the probability is 0.9994.
To learn more about tuberculosis :
https://brainly.com/question/18173152
#SPJ11
Consider the equilibrium of each of the carbonyl compounds with HCN to produce cyanohydrins. Which is the correct ranking of compounds in order of increasing Keq for this equilibrium?
A) H2CO < cyclohexanone < CH3CHO < 2-methylcyclohexanone
B) CH3CHO < 2-methylcyclohexanone < cyclohexanone < H2CO
C) cyclohexanone < 2-methylcyclohexanone < H2CO < CH3CHO
D) cyclohexanone < 2-methylcyclohexanone < CH3CHO < H2CO
E) 2-methylcyclohexanone < cyclohexanone < CH3CHO < H2CO
The correct ranking of compounds in order of increasing Keq for the equilibrium with HCN to produce cyanohydrins is: B) CH3CHO < 2-methylcyclohexanone < cyclohexanone < H2CO
In this equilibrium, a higher Keq value indicates a greater extent of the reaction, meaning a higher concentration of cyanohydrin product at equilibrium.
Among the given options, CH3CHO (acetaldehyde) is the least reactive carbonyl compound towards HCN, resulting in a lower Keq. As we move from left to right in the options, the carbonyl compounds become more reactive towards HCN, leading to higher Keq values.
Based on this, the correct ranking of compounds in order of increasing Keq is CH3CHO < 2-methylcyclohexanone < cyclohexanone < H2CO.
To learn more about cyanohydrins
https://brainly.com/question/32477278
#SPJ11
calculate the percent by mass of kbr in a saturated solution of kbr in water at 10 °c
To answer this question, we need more information.
To calculate the percent by mass of KBr in a saturated solution at 10 °C, we need to know the solubility of KBr at that temperature. The solubility of KBr in water varies with temperature. Without this information, we cannot provide an accurate calculation.
The solubility of KBr at 10 °C can be determined from experimental data or reference sources. Once the solubility is known, the percent by mass of KBr can be calculated using the formula:
Percent by mass of KBr = (mass of KBr / mass of solution) × 100
Where the mass of KBr is the mass of KBr dissolved in the given amount of water to form a saturated solution. The mass of the solution is the total mass of the solution, which includes the mass of both KBr and water.
Hope this helps.
place each study of deviance in chronological order, from first to last.
The chronological order of the studies of deviance from first to last is Pre 1930, 1930-1950, 1950-1970, and 1990s -to present.
Deviance is a social behavior that violates the norms of society. It is viewed as a moral or normative challenge to society and to some extent involves being different from the norms.
Sociologists have studied deviance in different ways, and the following is a chronological order of the studies of deviance:
Pre 1930's: The classic deviance theory This theory, which emerged in the late 19th and early 20th centuries, was led by Italian sociologist Cesare Lombroso. The theory argued that criminals were born with certain traits that made them different from normal people. In this regard, it argued that criminality was biologically determined.
1930-1950: Cultural deviance theory This theory was an alternative to the classic deviance theory and argued that criminal behavior was shaped by cultural and environmental factors rather than biological factors. The theory posited that social disorganization, poverty, and a lack of social control in a community contributed to high levels of crime.
1950-1970: Social control theory This theory focused on why people did not engage in deviant behavior rather than why they did. The theory argued that social control and socialization processes were critical in shaping individuals’ conformity to norms and values. The theory identified several factors, including attachment to others, commitment to conventional goals, and belief in the legitimacy of authority.
1970s-1990s: Labeling theory This theory argued that deviance was not an inherent trait but was instead a consequence of the application of labels to certain types of behavior. It argued that society created deviance by labeling certain behaviors and individuals as deviant. Therefore, labeling individuals as deviant had a self-fulfilling prophecy, where they would internalize the label and continue with the deviant behavior.
1990s-Present: Social conflict theory This theory is a Marxist theory that posits that deviance is a result of social inequality and that the criminal justice system is used to maintain the status quo. It argues that society is divided into groups, and the groups with power define deviance to maintain their dominance over the other groups.
Therefore, Social conflict theory has focused on issues of race, class, gender, and power relations in the criminal justice system and society as a whole.
Learn more about Social conflict theory from the given link:
https://brainly.com/question/30397979
#SPJ11
Select the single best answer. Considering only electron density, will the following reaction occur? {HC} \equiv {CH}+\dddot{{OH}} →
As a result, the given reaction, {HC} ≡ {CH} + {OH} → does not occur due to incompatibility of reactants.
The reaction: {HC} ≡ {CH} + {OH}→ cannot occur due to the incompatibility of the two reactants. The hydroxyl radical is not stable and has a single unpaired electron in its outer shell, whereas the ethyne molecule has a triple bond between the two carbon atoms, resulting in a low electron density. Therefore, the reaction can be explained by the following two factors: Electron density The hydroxyl radical has a greater electron density than the ethyne molecule, resulting in an electron transfer from the hydroxyl radical to the ethyne molecule.
But the ethyne molecule lacks electron density to satisfy the unpaired electron in the hydroxyl radical, and the reaction is stopped. Bond dissociation energy The bond dissociation energy between the carbon-carbon triple bond and the carbon-hydrogen bond is high. As a result, the reaction is not possible because the hydroxyl radical does not provide enough energy to break these bonds. Moreover, The reaction between the hydroxyl radical and ethyne is endothermic and requires the absorption of energy from the surroundings to proceed.
To know more about electron visit:
https://brainly.com/question/12001116
#SPJ11
1. Which lines run north and south along the earth’s surface? Choose all that apply.
a. latitude lines b. longitude lines c. Equator d. Prime Meridian
2. Degrees of latitude and longitude can be divided into Choose all that apply.
a. hours b. minutes c. seconds d. days
3. Through which two continents does the 180th meridian pass? Circle two.
a. North America, b. South America, c. Antarctica, d. Africa, e. Asia.
1. The lines that run north and south along the earth’s surface are the latitude lines and longitude lines.
2. Degrees of latitude and longitude can be divided into hours, minutes, and seconds.
3. The 180th meridian passes through Asia and Antarctica.
1. Latitude lines and longitude lines are the two types of lines that run north and south along the earth’s surface.
Latitude lines: Latitude is a geographic coordinate that specifies the north-south position of a point on the Earth's surface. Latitude lines run from east to west and are parallel to the Equator. The equator is defined as 0 degrees latitude. The latitude increases to 90 degrees in both the north and south directions.
Longitude lines: Longitude is a geographic coordinate that specifies the east-west position of a point on the Earth's surface. Longitude lines run from north to south, and they are not parallel to each other. They meet at the poles and are widest at the equator. The Prime Meridian, which passes through Greenwich, England, is defined as 0 degrees longitude. The longitude increases to 180 degrees in both the east and west directions.
2. Degrees of latitude and longitude can be divided into hours, minutes, and seconds. Latitude and longitude are expressed in degrees, minutes, and seconds. A degree of latitude or longitude can be divided into 60 minutes, and each minute can be divided into 60 seconds.
3. The 180th meridian passes through Asia and Antarctica.
The International Date Line follows the 180th meridian for the most part. The International Date Line crosses the 180th meridian in the western Pacific Ocean, deviating to pass around some territories and island groups. The 180th meridian crosses the Arctic Ocean, Asia, the Pacific Ocean, the Southern Ocean, and Antarctica.
Learn more about The Prime Meridian: https://brainly.com/question/20573958
#SPJ11
A vessel contains 15.0 mol of oxygen gas and 15.0 mol of carbon monoxide gas at a temperature of 25.0∘C and a pressure of 101.3 kPa. Calculate the volume of the vessel in L Calculate the partial pressure of the oxygen gas If the volume of the vessel is doubled, what effect does this have on the total pressure in the vessel?
The volume of the vessel = 697.97 L
The partial pressure of oxygen = 50.65 kPa
The pressure of the gas after doubling the volume of the vessel = 50.65 kPa
Step 1: Total moles of gases = 15 + 15 = 30
Temperature of the gas = 25.0 ∘C = 298 K
The pressure of the gas = 101.3 kPa
The volume of the vessel:
We can use the ideal gas equation to calculate the volume of the vessel;
PV = nRT, where, P = pressure of the gas
V = volume of the gas
n = number of moles of gas
R = gas constant
T = temperature of the gas
We know the value of P, n, R, and T; let's put the values in the above equation and calculate the value of V.
The volume of the vessel: 101.3 × V = 30 × 8.314 × 298V = 30 × 8.314 × 298 / 101.3V = 697.97 L
Step 2: Calculate the partial pressure of oxygen:
We can use the mole fraction to calculate the partial pressure of oxygen.
The partial pressure of oxygen = Mole fraction of oxygen × Total pressure
The total moles of gases are 30 (15.0 mol of oxygen and 15.0 mol of carbon monoxide)
Mole fraction of oxygen = 15.0 / 30 = 0.5
The partial pressure of oxygen = 0.5 × 101.3 = 50.65 kPa
Step 3: The effect of doubling the volume of the vessel on the total pressure of the vessel:
According to the ideal gas equation, PV = nRT, If the volume (V) of the vessel is doubled, then the pressure (P) of the gas will be reduced by half.
P1V1 = P2V2, where, P1 = pressure of the gas before doubling the volume
V1 = volume of the gas before doubling
P2 = pressure of the gas after doubling the volume
V2 = volume of the gas after doubling the volume
The pressure of the gas after doubling the volume of the vessel:
P1V1 = P2V2
P2 = P1V1 / V2
P2 = 101.3 × 697.97 / (2 × 697.97)P2 = 50.65 kPa (pressure of the gas after doubling the volume)
Learn more about partial pressure:
https://brainly.com/question/14119417
#SPJ11
traditional oil paints are diluted with what items? multiple select question. water mineral spirits white primer turpentine
The water is not typically used to dilute traditional oil paints. Oil and water do not mix, and adding water to oil-based paints can cause separation and hinder the desired paint properties. White primer is not a diluent but rather a preparatory layer applied to the surface before painting to enhance adhesion and promote an even paint application.
Traditional oil paints are typically diluted with mineral spirits and turpentine, making them the correct options from the given choices.Mineral spirits: Also known as white spirits or paint thinner, mineral spirits are commonly used as a solvent to dilute oil paints. It helps to thin the paint's consistency, making it easier to spread and manipulate on the canvas. Mineral spirits evaporate slowly, allowing for better control over the drying time of the paint.Turpentine: Turpentine is another solvent frequently employed to thin oil paints. It is derived from pine trees and has a strong odor. Turpentine effectively thins the paint and aids in brush cleaning. It evaporates relatively quickly, which can accelerate the drying process of the paint layers.For more such questions on Oil
https://brainly.com/question/14260176
#SPJ8
Calculate the pH of a solution prepared by dissolving 1.30 g of sodium acetate, CH3COONa, in 85.0 mL of 0.25 Macetic acid, CH3COOH(aq). Assume the volume change upon dissolving the sodium acetate is negligible. Ka of CH3COOH is 1.75x10-5
The pH of the given solution is 3.91.
The balanced chemical reaction between acetic acid and sodium acetate is:
CH3COOH(aq) + NaCH3COO(aq) ⟺ H2O(l) + Na+(aq) + CH3COO-(aq).
Since NaCH3COO is a salt of a weak acid and a strong base, the salt undergoes hydrolysis producing basic products. NaCH3COO hydrolysis can be represented as; NaCH3COO(aq) + H2O(l) ⇌ Na+(aq) + OH-(aq) + CH3COOH(aq)pKa of CH3COOH is 4.76.
Amount of sodium acetate (CH3COONa) = 1.30 gVolume of acetic acid, (CH3COOH) = 85.0 mL = 0.085 L, Concentration of acetic acid (CH3COOH) = 0.25 M(Ka) of CH3COOH = 1.75 x 10-5
The molarity of sodium acetate (CH3COONa) can be calculated as:-
The number of moles of CH3COONa = mass of CH3COONa / molar mass of CH3COONa = 1.3 / 82.03 = 0.0158 MVolume of acetic acid remains unchanged on adding sodium acetate since the volume change upon dissolving the sodium acetate is negligible.
Using the Henderson-Hasselbalch equation;pH = pKa + log (salt concentration / acid concentration)
pH = 4.76 + log (0.0158 / 0.25)pH = 4.76 + (-0.85) pH = 3.91.
Therefore, the pH of the given solution is 3.91.
Learn more about the "sodium acetate" :
https://brainly.com/question/31140017
#SPJ11
Deteine the number of atoms in 68.4 gSn. (The molar mass of tin is 118.71 g/mol.) 3.47×1023Sn atoms 4.89×1027Sn atoms 1.35×10−20Sn atoms 9.57×10−25Sn atoms
The number of atoms in 68.4 g of Sn is 3.47 x 10²³ Sn atoms. The answer is 3.47 × 10²³ Sn atoms.
The number of atoms in 68.4 g of Sn can be calculated using Avogadro's number and the molar mass of tin. Avogadro's number is equal to 6.022 x 10²³ mol⁻¹.
To determine the number of atoms, follow the steps below:
Step 1: Determine the number of moles of Sn using the formula below:n = m/M
Where:n = number of molesm = mass of SnM = molar mass of Sn Substituting the given values:n = 68.4 g/118.71 g/moln = 0.576 mol
Step 2: Calculate the number of atoms using Avogadro's number and the formula below: N = n x Nᵤ
Where:N = number of atomsn = number of molesNᵤ = Avogadro's number Substituting the given values:N = 0.576 mol x 6.022 x 10²³ mol⁻¹N = 3.47 x 10²³ Sn atoms.
For more such questions on atoms
https://brainly.com/question/6258301
#SPJ8
The diagram below shows two rigid sealed containers with gas.
which of the following diagrams best depicts the result of combining the contents of the two flasks above into one 4 l container at the same temperature?
The diagram that best depicts the result of combining the contents of the two flasks into one 4 L container is the one where the gas fills the entire container without any empty space.
In order to determine the diagram that accurately represents the result of combining the contents of two sealed gas containers into one 4 L container at the same temperature, we need to consider the principles of gas behavior. The principles of gas behavior, also known as the gas laws, describe the relationships between the physical properties of gases, such as pressure, volume, and temperature. When two gas containers are combined, the total volume of the gas will be the sum of the individual volumes. In a sealed container, the gas particles are confined, and there is no exchange with the surroundings. As a result, the pressure of the gas remains constant because there is no change in the force exerted by the gas on the container walls. Additionally, since the gas is at the same temperature, there are no temperature-induced variations in pressure according to the ideal gas law. In this case, both containers have a volume of 2 L, resulting in a total volume of 4 L. Since the containers are sealed and the gas is at the same temperature, the pressure of the gas remains constant. Consequently, the combined gas will uniformly occupy the entire 4 L container, with no empty space. Hence, the most suitable diagram should depict the gas filling the entirety of the container, without any vacant areas.
Read more about gas laws. https://brainly.com/question/30458409 #SPJ11
a set of three nucleophilic displacement reactions is shown below:
Nucleophilic displacement reactions involve the substitution of one nucleophile by another. This process occurs in three steps: initiation, nucleophilic attack, and elimination.
Nucleophilic displacement reactions are a fundamental class of reactions in organic chemistry. These reactions involve the substitution of a nucleophile (an atom or group with an unshared pair of electrons) for a leaving group (a group that can depart with its pair of electrons). The three steps involved in these reactions are initiation, nucleophilic attack, and elimination.
In the initiation step, a nucleophile reacts with a suitable reagent or catalyst, which provides the necessary conditions for the reaction to occur. This initiation step prepares the nucleophile for the subsequent attack on the substrate.
The second step is the nucleophilic attack. Here, the activated nucleophile, now possessing a partial negative charge, attacks the electrophilic carbon of the substrate, displacing the leaving group. This attack results in the formation of a new bond between the nucleophile and the substrate, while the leaving group is expelled.
Finally, in the elimination step, the leaving group is eliminated, typically accompanied by the formation of a new bond or rearrangement of existing bonds. This step completes the nucleophilic displacement reaction and yields the final product.
Learn more about nucleophilic
brainly.com/question/29563504
#SPJ11
The Haber-Bosch process is a very important industrial process. In the Haber-Bosch process, hydrogen gas reacts with nitrogen gas to produce ammonia according to the equation 3 {H}_{2}(
The Haber-Bosch process is a crucial industrial process. The process is employed in the manufacture of ammonia, which is an important nitrogen-based compound.
Nitrogen is abundant in the air, comprising around 80% of the earth's atmosphere. The problem is that atmospheric nitrogen is very inert and does not readily react with other elements or molecules, making it very difficult to produce nitrogen-based compounds such as ammonia. The Haber-Bosch process involves the reaction of hydrogen and nitrogen gas to produce ammonia through a multi-step process. The first step in the process is the reaction of nitrogen and hydrogen to produce ammonia.
This reaction is exothermic and releases energy, which is used to drive the reaction forward. The second step is the removal of the ammonia from the reaction mixture. This is done by cooling the reaction mixture to a temperature where ammonia condenses into a liquid, which is then removed from the reaction mixture. The third step is the separation of the unreacted nitrogen and hydrogen gases from the ammonia product. This is done by passing the reaction mixture through a series of scrubbers that remove the unreacted gases from the ammonia product.
To know more about Haber-Bosch visit:
brainly.com/question/26667299
#SPJ11
Briefly define the following tes: 4.1.1 Ion 4.1.2 Valence electron 4.2 Specify which of the sub-atomic particles deteine the overall mass and overall size for an atom. 4.3 For each of the following elements, write its chemical symbol, locate it in the Periodic Table, and indicate whether it is a metal, metalloid, or non-metal.
1. Ion: An ion is an atom or molecule that has a net electrical charge due to the gain or loss of one or more electrons. An ion with a positive charge is called a cation, while an ion with a negative charge is called an anion.
2. Valence electron: The valence electron is an electron that is found in the outermost shell of an atom, and it is involved in the formation of chemical bonds with other atoms. The number of valence electrons is determined by the element's position in the periodic table, and it is a key factor in the element's chemical reactivity.
The sub-atomic particle that determines the overall mass of an atom is the neutron, while the overall size of an atom is determined by the electron cloud.
For each of the following elements:
1. Carbon: Chemical symbol = C; Located in group 14 (IV A) of the periodic table; Non-metal.
2. Silicon: Chemical symbol = Si; Located in group 14 (IV A) of the periodic table; Metalloid.
3. Iron: Chemical symbol = Fe; Located in group 8 (VIII B) of the periodic table; Metal.
Learn more about electron cloud:
https://brainly.com/question/29848631
#SPJ11
Enter a balanced chemical equation for the feentation of glucose (C6H12O6)(C6H12O6) by Clostridium pasteurianum in which the aqueous sugar reacts with water to fo 2 moles of aqueous acetic acid (CH3CO2H)(CH3CO2H), carbonic acid (H2CO3)(H2CO3), and hydrogen gas.
The balanced chemical equation for the fermentation of glucose (C6H12O6) by Clostridium pasteurianum is:
C6H12O6 + 2 H2O → 2 CH3CO2H + H2CO3 + 2 H2
This equation represents the conversion of glucose and water into acetic acid, carbonic acid, and hydrogen gas during the fermentation process.
The balanced chemical equation for the fermentation of glucose (C6H12O6) by Clostridium pasteurianum, in which the aqueous sugar reacts with water to form 2 moles of aqueous acetic acid (CH3CO2H), carbonic acid (H2CO3), and hydrogen gas is:
C6H12O6 + H2O → 2CH3COOH + H2CO3 + 2H2
Where, C6H12O6 is glucose
H2O is water
CH3COOH is aqueous acetic acid
H2CO3 is carbonic acid
H2 is hydrogen gas
How does this equation is obtained?
The fermentation of glucose is an exothermic process that occurs in the absence of oxygen. The fermentation of glucose by Clostridium pasteurianum is an example of this type of reaction. The balanced chemical equation for this reaction is obtained by following the steps given below:
Step 1: Write the unbalanced chemical equation for the reaction.
C6H12O6 + H2O → CH3COOH + H2CO3 + H2
Step 2: Balance the equation by adding coefficients in front of the chemical formulas to make the number of atoms of each element the same on both sides of the equation.
C6H12O6 + H2O → 2CH3COOH + H2CO3 + 2H2
Learn more about Balanced Chemical Equation here:
https://brainly.com/question/29130807
#SPJ11
