1. Encryption/Decryption Algorithms (250 words max) Discuss a commonly used asymmetric algorithm. Include features such as key size, security issues, speed.

Answers

Answer 1

Asymmetric encryption algorithm is also called Public Key Cryptography. It uses two keys; one is public key and the other is private key. RSA algorithm is one of the widely used asymmetric encryption algorithms.

Features of RSA Algorithm

RSA (Rivest, Shamir, and Adleman) algorithm is a well-known asymmetric encryption algorithm. RSA algorithm is used for encrypting and signing digital data. The key length of RSA is important for the security of the algorithm. The higher the key length the more secure it is.

The security of RSA algorithm lies in the difficulty of factoring large integers that are the product of two large prime numbers. RSA algorithm uses a public key to encrypt data and a private key to decrypt data. Since the public key is made available to everyone, anyone can encrypt data. However, only the receiver with the private key can decrypt the data.The speed of RSA is relatively slow when compared with symmetric encryption algorithms. However, RSA algorithm provides better security and is used in a lot of encryption applications.

The security of RSA algorithm relies on the difficulty of factoring large integers, which is computationally complex and time-consuming.

Security IssuesRSA algorithm is known for its security. However, with increased computing power, attacks on RSA algorithm have also increased. Security issues that can affect RSA algorithm include brute force attacks, chosen ciphertext attacks, and side-channel attacks.

Therefore, key length of RSA should be carefully chosen for better security. A key length of 2048 bits or more is recommended for RSA encryption algorithms.

To know more about asymmetric algorithm visit:

https://brainly.com/question/30407493
#SPJ11


Related Questions

9.1 Unit 5 Lab Assignment
The goal of this assignment is to explore the concept of
recursion. To do this you will construct a project that leverages
two specific algorithms: Quick Sort and Binary Sear

Answers

Recursion is the process of calling a function inside itself until a condition is met. A recursive function is a function that calls itself during its execution. Recursion can be used to solve some problems with simple and elegant code. This is because a problem is often simpler when it is divided into smaller problems.

Quick Sort is a divide-and-conquer algorithm. It picks an element as pivot and partitions the given array around the picked pivot. It repeatedly divides the array into sub-arrays by choosing a pivot element from the sub-array and partitioning the other elements around the pivot element. Binary search is an algorithm used to search for an element in a sorted array or list by dividing the search interval in half at every comparison. The goal of this assignment is to explore recursion by implementing Quick Sort and Binary Search algorithms in a program. You can use any programming language to implement the algorithms in your program. You should explain the process of how you wrote your program, and how you tested it. In addition, include a brief description of recursion and the algorithms you used in your implementation. This should be written in 150 words.

To know more about Recursion visit:

https://brainly.com/question/32344376

#SPJ11

application of big data technology in aircraft
maintenance

Answers

Big data technology is transforming various fields of work, and the aviation industry is no exception. In recent years, many companies are employing big data technologies in aircraft maintenance.

Aircraft maintenance generates massive amounts of data, including data from sensors and maintenance logs, which can be used to monitor and manage aircraft health. Here are some ways in which big data technology is applied in aircraft maintenance:

a. Predictive maintenance: With the help of big data technology, maintenance teams can identify potential problems before they occur, enabling them to take proactive measures. Predictive maintenance involves analyzing real-time data from sensors, historical maintenance logs, and weather conditions to predict the probability of failures.

b. Health and usage monitoring systems (HUMS): HUMS use real-time data and sensors to monitor the health of aircraft components, including engines, gearboxes, and rotor systems. This helps identify problems before they become severe and schedule maintenance accordingly.

c. Internet of Things (IoT): IoT devices are installed in aircraft to collect data and share it with maintenance teams on the ground. For instance, IoT sensors can track aircraft positions, monitor fuel levels, and detect engine faults. This data is transmitted in real-time to the maintenance teams, enabling them to respond to issues immediately.

d. Data analytics: Big data analytics tools are used to process and analyze the vast amounts of data generated in aircraft maintenance. This helps maintenance teams identify patterns, trends, and anomalies, enabling them to optimize maintenance schedules and improve aircraft health.

To know more about Big Data Technology visit:

https://brainly.com/question/29851366

#SPJ11

secure sites typically use digital certificates along with security protocols.T/F

Answers

True, secure sites typically use digital certificates along with security protocols. The given statement is true.

.What are digital certificates? Digital certificates are a means of verifying the identity of an online entity, such as a website or software application. They are used to prove that the entity is legitimate and that the data transmitted between the entity and the user is secure. Digital certificates are commonly used in secure websites to establish an encrypted connection between the website and the user. This encrypted connection helps to protect sensitive information, such as login credentials or credit card numbers, from interception by hackers or other malicious actors. Security protocols, such as SSL (Secure Sockets Layer) and TLS (Transport Layer Security), are also used in conjunction with digital certificates to ensure that the data transmitted between the website and the user is secure. These protocols encrypt the data to prevent interception and unauthorized access.

In conclusion, the use of digital certificates along with security protocols is standard practice for securing websites and protecting user data.

know more about secure sites

https://brainly.com/question/31578523

#SPJ11

What is the command to use version 2 of the RIP protocol. Select one: a. R1(config)# router rip b. R1(config-router)# default-information originate c. R1(config-router)# no auto-summary d. R1(config)#

Answers

The command to use version 2 of the RIP protocol in Cisco routers is not provided in the given options. The correct command would be "R1(config-router)# version 2".

The correct command to specify the use of Routing Information Protocol (RIP) version 2 on a Cisco router is not included in the options you provided. It should be "R1(config-router)# version 2". This command is used within the RIP router configuration mode, which is accessed using "R1(config)# router rip". Once in this mode, specifying "version 2" instructs the router to use RIP version 2 for this routing process.

The options provided seem to refer to other aspects of RIP configuration. The "default-information originate" command is used to generate a default route in RIP, "no auto-summary" disables automatic network summarization, and the last option "R1(config)#" just represents the global configuration mode prompt, which does not specify the use of RIP version 2.

Learn more about RIP protocol here:

https://brainly.com/question/32190485

#SPJ11

Complete programming challenge 7 from the end of chapter 17.
Enhance your program to sort the array before procession it using
an algorithm of your choice. Remember to include commenting and
formattin

Answers

The program should also use pointer notation instead of array notation.The following program addresses this problem. The program is separated into a header file and a source file for clarity.

You will notice that the program is well-commented and formatted, as requested in the question header file.```
// "testScores.h" file
#pragma once
void sortScores(double* testScores, int arraySize);
double calcAverage(double* testScores, int arraySize);
void displayResults(double* testScores, int arraySize);
```The above code defines the function prototypes that will be used in the main source file. Below is the implementation of these functions:```
// "testScores.cpp" file
#include
#include
#include "testScores.h"
using namespace std;
void sortScores(double* testScores, int arraySize) {
   // sort test scores in ascending order
   sort(testScores, testScores + arraySize);
}
double calcAverage(double* testScores, int arraySize) {
   // calculate average score
   double sum = 0.0;
   for (int i = 0; i < arraySize; i++) {
       sum += *(testScores + i);
   }
   double average = sum / arraySize;
   return average;
}
void displayResults(double* testScores, int arraySize) {
   // display sorted list of scores and averages
   cout << "Sorted Test Scores:" << endl;
   for (int i = 0; i < arraySize; i++) {
       cout << *(testScores + i) << " ";
   }
   cout << endl << "Average Score: " << calcAverage(testScores, arraySize) << endl;
}
int main() {
   int arraySize;
   double* testScores;
   cout << "Enter the number of test scores: ";
   cin >> arraySize;
   testScores = new double[arraySize]; // dynamically allocate array
   // read in test scores
   for (int i = 0; i < arraySize; i++) {
       cout << "Enter test score #" << i + 1 << ": ";
       cin >> *(testScores + i);
   }
   sortScores(testScores, arraySize); // sort scores
   displayResults(testScores, arraySize); // display sorted scores and average
   delete[] testScores; // deallocate memory
   return 0;
}
```The program dynamically allocates an array of doubles to hold the test scores entered by the user. It then reads in these test scores and sorts them using the `sort()` function from the `` library. The program then computes the average score of the sorted test scores using a separate function called `calcAverage()`.

Finally, the program displays the sorted list of scores and the average score using the `displayResults()` function. At the end of the program, the dynamically allocated array of test scores is deallocated using the `delete[]` operator.

To know more about pointer notation visit:

https://brainly.com/question/33364925

#SPJ11

For each of the values below, assume that the represent an error correction code using an encoding scheme where the parity bits p1, p2, p3, and p4 are in bit positions 1, 2, 4, and 8 respectively with the 8 data bits in positions, 3,5,6,7,9,10, 11, and 12 respectively. Specify whether the code is valid or not and if it is invalid, in which bit position does the error occur or if it's not possible to determine?
A) 1111 1000 1001
B) 1100 0011 0100
C) 1111 1111 1111

Answers

To determine if the given codes are valid or invalid and identify any errors, we can calculate the parity bits and check if they match the provided code.

The analysis for each code Iis as folows:

A) 1111 1000 1001:

p1 = 1 (parity of bits 3, 5, 7, 9, 11)

p2 = 0 (parity of bits 3, 6, 7, 10, 11)

p3 = 1 (parity of bits 5, 6, 7, 12)

p4 = 0 (parity of bits 9, 10, 11, 12)

The calculated parity bits are: 1010

Since the calculated parity bits do not match the provided code (1111), we can determine that there is an error in this code. However, it is not possible to determine the exact bit position where the error occurred.

B) 1100 0011 0100:

p1 = 1 (parity of bits 3, 5, 7, 9, 11)

p2 = 0 (parity of bits 3, 6, 7, 10, 11)

p3 = 1 (parity of bits 5, 6, 7, 12)

p4 = 0 (parity of bits 9, 10, 11, 12)

The calculated parity bits are: 1010

In this case, the calculated parity bits match the provided code (1100 0011 0100). Therefore, this code is valid.

C) 1111 1111 1111:

p1 = 1 (parity of bits 3, 5, 7, 9, 11)

p2 = 1 (parity of bits 3, 6, 7, 10, 11)

p3 = 1 (parity of bits 5, 6, 7, 12)

p4 = 1 (parity of bits 9, 10, 11, 12)

The calculated parity bits are: 1111

In this case, the calculated parity bits also match the provided code (1111 1111 1111). Hence, this code is valid as well.

To summarize:

A) Invalid code, error occurred, bit position unknown.

B) Valid code, no error.

C) Valid code, no error.

You can learn more about parity bits at

https://brainly.in/question/28992507

#SPJ11

Write a Java static method countNums() that gets a file name as parameter, counts the number of double numbers in that file, and returns this count.
Write Java statements that call countNums() method, than print the number of numbers in the file.
Part 2:
Write a Java static method readNums() that gets a file name and an integer number (size) as parameters, then
• creates an array of doubles of the given size,
• reads numbers from file, stores them into this array, and
• returns the created array.
Write a Java static method printArray() that takes an array of doubles as parameter, and prints the values with a space between them, and 10 numbers on each line.
Write Java statements that creates an array of doubles by calling readNums() method, then print the array by calling printArray() method as seen in sample run below.
Part 3:
Write a Java static method bubbleSort() that takes an array of doubles as parameter, and sorts this array in descending order using the Bubble sort algorithm.
Write Java statements that calls bubbleSort() method to sort the array and print the array by callingprintArray() method.
You can use the bubbleSort() method of the program shared in LMS, but be aware that it needs modifications to sort array of doubles and also descendengly.
Part 4:
Write a Java static method average() that takes an array of doubles as parameter, and computes and returns the average of the numbers in the array.
Write Java statements that get the average by calling average() method with the sorted array, print the maximum, minimum values and the average, as seen in sample run below.
The average has to be printed with only 4 decimal digits, so please use printf method with appropriate formatting, instead of println method.
Your program will have five methods: countNums(), readNums(), printArray(), bubbleSort(), average(). Attention: Use an array, not an ArrayList!

Answers

The method countNums() reads the file and counts the number of double numbers.The method readNums() reads the file and creates an array of doubles with the specified size, storing the numbers from the file into the array.

import java.io.File;

import java.io.FileNotFoundException;

import java.util.Scanner;

public class NumberProcessor {

   public static int countNums(String fileName) {

       int count = 0;

       try {

           File file = new File(fileName);

           Scanner scanner = new Scanner(file);

           while (scanner.hasNextDouble()) {

               scanner.nextDouble();

               count++;

           }

           scanner.close();

       } catch (FileNotFoundException e) {

           e.printStackTrace();

       }

       return count;

   }

   public static double[] readNums(String fileName, int size) {

       double[] numbers = new double[size];

       try {

           File file = new File(fileName);

           Scanner scanner = new Scanner(file);

           for (int i = 0; i < size && scanner.hasNextDouble(); i++) {

               numbers[i] = scanner.nextDouble();

           }

           scanner.close();

       } catch (FileNotFoundException e) {

           e.printStackTrace();

       }

       return numbers;

   }

   public static void printArray(double[] array) {

       for (int i = 0; i < array.length; i++) {

           System.out.printf("%.4f ", array[i]);

           if ((i + 1) % 10 == 0) {

               System.out.println();

           }

       }

   }

   public static void bubbleSort(double[] array) {

       int n = array.length;

       for (int i = 0; i < n - 1; i++) {

           for (int j = 0; j < n - i - 1; j++) {

               if (array[j] < array[j + 1]) {

                   double temp = array[j];

                   array[j] = array[j + 1];

                   array[j + 1] = temp;

               }

           }

       }

   }

   public static double average(double[] array) {

       double sum = 0.0;

       for (double num : array) {

           sum += num;

       }

       return sum / array.length;

   }

   public static void main(String[] args) {

       String fileName = "numbers.txt";

       int count = countNums(fileName);

       System.out.println("Number of numbers in the file: " + count);

       int size = 20;

       double[] numbers = readNums(fileName, size);

       System.out.println("Array of numbers:");

       printArray(numbers);

       bubbleSort(numbers);

       System.out.println("Sorted array (descending order):");

       printArray(numbers);

       double avg = average(numbers);

       System.out.printf("Average: %.4f\n", avg);

   }

}

learn more about array here:

https://brainly.com/question/13261246

#SPJ11

Digital signasl Processing
(c) Design a bandpass filter using hamming window of length 11 , given that \( \omega_{\mathrm{c} 1}=0.2 \pi \) and \( \omega_{\mathrm{c} 2}=0.6 \pi \)

Answers

Digital Signal Processing (DSP) is the application of mathematical algorithms to process digitized signals to perform useful operations such as filtering, compression, equalization, and more. In DSP, the Hamming window is an important function used for digital filtering. It is used for truncating infinite impulse response (IIR) filters and finite impulse response (FIR) filters.

The Hamming window function is defined by the formula below:

[tex]$$w(n)=0.54-0.46\cos(\frac{2\pi n}{N-1})$$[/tex]

where n is the sample number, N is the length of the window. The problem requires designing a bandpass filter using Hamming window with length 11 given that ωc1=0.2π and ωc2=0.6π. A bandpass filter allows a specific range of frequencies to pass through while rejecting or attenuating other frequency ranges. It is designed using the following steps:Specify the filter order: The filter order is given by the expression $M=(N-1)/2$ where N is the length of the filter window.Find the ideal impulse response of the filter: The impulse response of the filter can be found using the formula

[tex]$$h_d(n)=\frac{sin(\omega_{c2}(n-M))-sin(\omega_{c1}(n-M))}{\pi(n-M)}$$[/tex]

where M is the filter order, n is the sample number, and ωc1 and ωc2 are the two cutoff frequencies.Normalize the filter coefficients: The filter coefficients are normalized such that the frequency response of the filter is scaled to unity at frequency π. This is achieved using the formula

[tex]$$h(n)=h_d(n)\times w(n)$$[/tex]

where w(n) is the Hamming window of length 11 given by the equation above.Finally, the bandpass filter frequency response is plotted. The implementation of the filter can be done using convolution, which is a mathematical operation used to calculate the output of the filter in response to the input signal. The convolution operation is given by

[tex]$$y(n)=\sum_{k=0}^{N-1}x(n-k)h(k)$$[/tex]

where y(n) is the output of the filter, x(n) is the input signal, h(k) is the filter coefficients, and N is the length of the filter window.

To know more about Digital Signal Processing, visit:

https://brainly.com/question/33440320

#SPJ11


In Assembly 8086 language exam I got a degree 3.5 / 5 and I
don't know where I'm mistake

this is picture of questions
loop1: mov al,[si] cmp al,[si+1] jl next xchg al.[si+1] xchg al,[si] next: inc si dec dl jnz loop1 dec cl jnz loop2 hit code ends end start To exchange the contents of (si) and (si+1) To test the data

Answers

The given assembly code snippet performs the following tasks:

1. Exchanges the contents of (si) and (si+1).

2. Tests the data segment.

3. Arranges the numbers in descending order.

4. Arranges the numbers in ascending order.

1. Exchanging the contents of (si) and (si+1):

- The code uses the `xchg` instruction to swap the values at memory locations (si) and (si+1).

- The `mov` instruction loads the value at (si) into the AL register.

- The `cmp` instruction compares the value at (si) with the value at (si+1).

- If the value at (si) is less than the value at (si+1) (`jl` condition), the code proceeds to the `next` label.

- If the condition is not met, the `xchg` instructions exchange the values at (si) and (si+1).

2. Testing the data segment:

- The code segment does not contain explicit instructions for testing the data segment. It might be referring to other parts of the program that are not shown.

3. Arranging the numbers in descending order:

- The code uses a loop labeled as `loop1` to compare and exchange adjacent values in memory.

- The `jl` instruction checks if the value at (si) is less than the value at (si+1).

- If it is, the values are exchanged using `xchg`, ensuring that the larger value moves towards the end of the memory block.

- The loop continues until all adjacent values are compared and swapped, resulting in the numbers being arranged in descending order.

4. Arranging the numbers in ascending order:

- The code does not explicitly contain instructions to arrange the numbers in ascending order.

- To achieve ascending order, the comparison condition in the `jl` instruction should be changed to `jg` (greater than) in the `loop1` loop.

In summary, the given assembly code performs operations to exchange values, test the data segment (not explicitly shown), and arrange numbers in descending order. To arrange the numbers in ascending order, the comparison condition in the `jl` instruction should be changed to `jg` in the `loop1` loop.

Learn more about snippet here:

https://brainly.com/question/30772469

#SPJ11

The complete question is:

loop1: mov al,[si] cmp al,[si+1] jl next xchg al.[si+1] xchg al,[si] next: inc si dec dl jnz loop1 dec cl jnz loop2 hit code ends end start To exchange the contents of (si) and (si+1) To test the data segment To arrange the numbers in descending order To arrange the numbers in ascending order

Which of the following is a TRUE statement? * 1 point Nodal processing delay is happened inside router's buffer. O Queuing delay is not effected by Nodal processing delay. O Propagation delay is always could be ignored. O Transmission delay is another name to identify Propagation delay

Answers

The statement that is true is "Nodal processing delay occurs inside a router's buffer."

Nodal processing delay refers to the time taken by a router to process a packet upon receiving it. This delay includes tasks such as examining the packet header, making forwarding decisions, and performing any necessary routing or error checks. Nodal processing delay occurs inside the router's buffer because the packet needs to be stored temporarily while these processing tasks are carried out.

Queuing delay, on the other hand, refers to the time spent by a packet waiting in a queue before it can be transmitted. Queuing delay can be affected by nodal processing delay because if the router is busy processing other packets, the incoming packet may have to wait in the queue longer before it can be forwarded.

Propagation delay is the time it takes for a signal to travel from the source to the destination. It is influenced by the physical distance between nodes and the characteristics of the medium through which the signal travels. Propagation delay cannot always be ignored, especially in long-distance or high-speed networks, as it can significantly impact overall network performance.

Transmission delay refers to the time taken to transmit the entire packet from the source to the outgoing link. It includes the time to transmit the packet's bits onto the link, which is determined by the packet's size and the transmission rate. Transmission delay and propagation delay are distinct concepts, and they cannot be used interchangeably as they refer to different aspects of network communication.

Learn more about router here: https://brainly.com/question/32243033

#SPJ11

which of the following does not use direct access?

Answers

A magnetic tape drive does not use direct access for data retrieval.

direct access is a method of accessing data directly from a storage device without having to read through the entire data set sequentially. It allows for quick and efficient retrieval of data by directly accessing specific locations or addresses. However, not all storage devices use direct access.

One example of a storage device that does not use direct access is a magnetic tape drive. Magnetic tape drives require sequential access, meaning that data is accessed in a linear fashion from the beginning to the end of the tape. This makes them slower for random access operations compared to devices that use direct access.

On the other hand, devices such as hard disk drives (HDDs), solid-state drives (SSDs), and random access memory (RAM) utilize direct access. These devices allow for fast and efficient retrieval of data by directly accessing specific locations or addresses.

Learn more:

About direct access here:

https://brainly.com/question/31837097

#SPJ11

The initial values of the data fields in your record are as
follows.
The field 'history' should be initialised to the single character
'|'
The field 'throne' should be initialised to decimal -761
The

Answers

When developing a program, setting the initial values of data fields is critical. In order to initialize values for data fields, the initial values of data fields in your record are as follows: the 'history' field should be initialized to the single character '|',the 'throne' field should be initialized to decimal -761,the 'birth_date' field should be initialized to "January 1, 1900".

When developing an object-oriented program, it is important to set the initial values of data fields. When developing programs, objects are used to represent data. The data in an object are represented by fields. Each field is defined as a variable within the class definition and has a name and a type. Fields in an object can have initial values.

The initial values of data fields in your record are as follows :The field 'history' should be initialised to the single character '|'.This means that when the object is created, the value of the 'history' field is set to '|'. The field 'throne' should be initialised to decimal -761. This means that when the object is created, the value of the 'throne' field is set to -761. The 'birth_date' field should be initialized to "January 1, 1900". This means that when the object is created, the value of the 'birth_date' field is set to "January 1, 1900". In conclusion, these initial values are critical to how objects operate.

To know more about objects visit:

https://brainly.com/question/14585124

#SPJ11

Use the Caesar cipher to decrypt the message SRUTXH BR WH DPR PDV

Answers

To decrypt the message "SRUTXH BR WH DPR PDV" using the Caesar cipher, we need to shift each letter in the message back by a certain number of positions in the alphabet. The Caesar cipher uses a fixed shift of a certain number of positions.

To decrypt the message, we need to determine the shift value. Since the shift value is not provided, we'll try all possible shift values (0 to 25) and see which one produces a meaningful message.

Here's the decrypted message for each shift value:

Shift 0: SRUTXH BR WH DPR PDV

Shift 1: RQTSWG AQ VG COQ OCU

Shift 2: QPSRVF ZP UF BNP NBT

Shift 3: PORQUE YO TE AMO MAS

Shift 4: ONQPTD XN SD ZLR LZR

Shift 5: NMPOSC WM RC YKQ KYQ

Shift 6: MLONRB VL QB XJP JXP

Shift 7: LKMMAQ UK PA WIO IWO

Shift 8: KJLLZP TJ OZ VHN HVN

Shift 9: JIKKYO SI NY UGM GUM

Shift 10: IHJJXN RH MX TFL FTL

Shift 11: HGIIWM QG LW SEK ESK

Shift 12: GHHVVL PF KV RDJ DRJ

Shift 13: FGGUUK OE JU QCI CQI

Shift 14: EFFTTJ ND IT PBH BPH

Shift 15: DEESSI MC HS OAG AOG

Shift 16: CDDRRH LB GR NZF ZNF

Shift 17: BCCQQG KA FQ MYE YME

Shift 18: ABBPPF JZ EP LXD XLD

Shift 19: ZAAOOE IY DO KWC WKC

Shift 20: YZZNND HX CN JVB VJB

Shift 21: XYYMNC GW BM IUA UIA

Shift 22: WXXLMB FV AL HTZ THZ

Shift 23: VWWKLA EU ZK GSY SGY

Shift 24: UVVJKZ DT YJ FRX RFX

Shift 25: TUUIJY CS XI EQW QEW

Among these possibilities, the shift value of 3 (Shift 3) produces a meaningful message: "PORQUE YO TE AMO MAS". Thus, the decrypted message is "PORQUE YO TE AMO MAS".

You can learn more about Caesar cipher at

https://brainly.com/question/14754515

#SPJ11

For the given inputs, write a java program to print Items with
maximum number of appearances should be sorted first. Ex: Input: 2,
2, 9, 7, 2, 9, 8, 9, 8, 2 Output: 2, 2, 2, 2, 9, 9, 9, 8, 8, 7

Answers

Here is a Java program that prints items with maximum number of appearances sorted first;

import java.util.*;
public class Main
{
   public static void main(String[] args)
   {
       Scanner sc = new Scanner(System.in);
       System.out.print("Enter the number of elements in the array: ");
       int n = sc.nextInt();
       int[] arr = new int[n];
       System.out.println("Enter the elements of the array: ");
       for(int i = 0; i < n; i++)
       {
           arr[i] = sc.nextInt();
       }
       HashMap map = new HashMap<>();
       for(int i = 0; i < n; i++)
       {
           if(map.containsKey(arr[i]))
           {
               map.put(arr[i],map.get(arr[i])+1);
           }
           else
           {
               map.put(arr[i],1);
           }
       }
       ArrayList> list = new ArrayList<>(map.entrySet());
       Collections.sort(list,new Comparator>()
       {
           public int compare(Map.Entry o1,Map.Entry o2)
           {
               if(o1.getValue().equals(o2.getValue()))
               {
                   return o1.getKey().compareTo(o2.getKey());
               }
               else
               {
                   return o2.getValue().compareTo(o1.getValue());
               }
           }
       });
       System.out.println("The sorted array is:");
       for(Map.Entry e : list)
       {
           for(int i = 0; i < e.getValue(); i++)
           {
               System.out.print(e.getKey() + " ");
           }
       }
   }
}```

In this program, we first take the input from the user and store it in an array. Then we create a hashmap and store the frequency of each element in the hashmap.

Next, we create an arraylist of entries and sort it using a comparator. The comparator compares the entries based on their value and if two entries have the same value, it compares them based on their key. Finally, we print the sorted array.

Learn more about Java program https://brainly.com/question/30354647

#SPJ11

Type of assignment: Individual Length: Word limit 400-500, double-spaced, not including cover page and reference list Use APA formatting for the main text and the reference list. Please refer to the APA Guide posted for instructions on how to properly paraphrase, summarize, quote and references your sources Business Etiquette Business etiquette is an important component for Business Professionals to consider. Purpose of this assignment is to understand how to respond in professional manner and what it is very important for business professionals. For this assignment you will describe business dining etiquette. Kindly research this topic in the online library and by finding reliable resources on the Internet. Must include the following What are Business Dinning etiquettes? Why Business Dining etiquettes are Important? Business Dinner Etiquette, Do's and Don'ts?

Answers

Business dining etiquette refers to the set of social norms and behaviors that govern proper conduct during professional meals or business-related dining events.

It involves understanding and following the appropriate protocols and manners to create a positive impression and maintain professional relationships.

Business dining etiquette plays a crucial role in the business world for several reasons. Firstly, it helps to establish a favorable image and reflects one's professionalism and respect for others. Demonstrating good etiquette during business meals can enhance one's credibility and reputation among colleagues, clients, and business partners. It shows that individuals have the ability to handle themselves with poise and grace in various social settings.

Additionally, business dining etiquette is important because it facilitates effective communication and networking. Dining events provide an opportunity for professionals to connect and build relationships outside of the formal work environment. Adhering to proper dining etiquette creates a comfortable and pleasant atmosphere, allowing participants to engage in meaningful conversations and establish rapport. By following the established rules and guidelines, individuals can avoid potential awkward situations or misunderstandings, ensuring that the focus remains on business matters and relationship-building.

Some essential do's and don'ts of business dinner etiquette include arriving on time, dressing appropriately, practicing good table manners, being attentive and engaged in conversations, and expressing gratitude to the host. On the other hand, it is important to avoid discussing controversial topics, using electronic devices excessively, or dominating the conversation. By being mindful of these guidelines, professionals can navigate business dining situations with confidence and professionalism.

When conducting research on business dining etiquette, it is recommended to consult reliable sources such as reputable books, articles, or websites that specialize in business etiquette. These sources can provide detailed insights into specific cultural norms, regional variations, and contemporary practices related to business dining. Additionally, reviewing case studies or real-life examples can offer practical illustrations of proper business dining etiquette in different scenarios. It is important to remember that cultural norms and expectations may vary, so understanding the context and specific requirements of each business setting is essential for success.

To learn more about websites click here:

brainly.com/question/32113821

#SPJ11

In this design problem you will create a VI that simulates a vending machine. The vending machine sells three items: a. Candy bars for $0.80 each, b. Potato chips for $0.60 a bag, and c. Chewing gum for $0.40 The vending machine accepts only five dollar bills, one dollar bills, quarters, dimes and nickels. Inputs on the front panel should include a numerical control for the user to enter the amount of money inserted into the vending machine and three more integer numeric controls that designate how many of each item the user wishes to purchase from the vending machine. Your VI should check to see if the amount of money input is greater than or equal to the cost of the selected purchase. If there is not enough money, display a message notifying the customer that more money is needed to meet the total. Then light an LED indicator on the front panel and display the amount needed on a numeric indicator. If enough money is inserted into vending machine based on the user selection, output the change user will receive, showing the quantity of dollar bills, quarters, dimes and nickels to be dispensed by the vending machine. (Hint: use "Stop" function from function palette (Programming>> Application Control) to abort execution in the case your VI goes to infinite execution. Use quotient and Remainder function to calculate change) 5. Work through Chapter 1 in Essick and turn in the resulting VI for "Sine Wave Generator-While Loop". Using Labview

Answers

In this design problem, you will be creating a VI (Virtual Instrument) that simulates a vending machine. The vending machine sells three items: Candy bars for $0.80 each .


To create the VI, you will need to include several inputs on the front panel numerical control for the user to enter the amount of money inserted into the vending machine.three more integer numeric controls to designate how many of each item the user wishes to purchase from the vending machine.Next, your VI should check if the amount of money input is greater than or equal to the cost of the selected purchase.Next, your VI should check if the amount of money input is greater than or equal to the cost of the selected purchase.


. If there is not enough money, display a message notifying the customer that more money is needed to meet the total. Additionally, you should light an LED indicator on the front panel and display the amount needed on a numeric indicator.On the other hand, if enough money is inserted into the vending machine based on the user's selection, your VI should output the change the user will receive. This should include the quantity of dollar bills, quarters, dimes, and nickels to be dispensed by the vending machine display the change on the front panel using appropriate indicators.

To know more about simulates visit:-
https://brainly.com/question/2166921

#SPJ11

Provide a complete and readable solution.
Research on the Quine-McCluskey Method for minimization of Boolean functions and circuits. Outline the important steps that are needed to be done in performing the method.

Answers

The Quine-McCluskey method is a powerful tool for minimizing Boolean functions and circuits. The method involves several steps, including constructing the truth table, grouping terms with the same number of 1's, finding the prime implicants, constructing a simplified expression, and verifying the results. By following these steps, we can obtain a simplified expression for a Boolean function that is both easy to understand and implement.

The Quine-McCluskey method is a technique used to minimize Boolean functions and circuits. It is an effective way of simplifying complex Boolean expressions. This method involves several steps that are important in minimizing Boolean functions and circuits.The first step in the Quine-McCluskey method is to write down the truth table for the Boolean function that needs to be minimized. The truth table should include all possible combinations of the input variables and the corresponding output values. Once the truth table has been constructed, the next step is to group together the terms that have the same number of 1's in their binary representation.Next, we need to find the prime implicants from the grouped terms. The prime implicants are the terms that cannot be further simplified or combined with other terms. Once the prime implicants have been identified, we can then use them to construct a simplified expression for the Boolean function. The simplified expression is obtained by selecting the prime implicants that cover all the 1's in the truth table.Finally, we need to check the simplified expression to ensure that it is correct. This is done by substituting the input values into the simplified expression and comparing the results with the original truth table. If the results are the same, then we have successfully minimized the Boolean function.

To know more about Quine-McCluskey method visit:

brainly.com/question/32234535

#SPJ11

the linux and unix ____ utility can be used for finding strings within files.

Answers

The Linux and Unix grep utility can be used for finding strings within files. It is a command-line utility used for searching plain-text data sets for lines that match a regular expression. grep stands for Global Regular Expression Print.

The command line utility enables you to quickly and easily search through text files for occurrences of a keyword or phrase. It is an invaluable tool for users of Linux and Unix-based operating systems. Grep can be used to search files for lines that contain a specific word or string of characters. It can also be used to search for lines that do not contain a particular pattern or string. Grep is a powerful utility that can be used in a variety of ways. It is often used in scripts to search log files for error messages or to extract specific pieces of information from large data files. Grep can also be used to search multiple files at once by using wildcards in the file name. The utility can search for patterns in a single file or a set of files, and can display the matching lines or the lines that do not match the pattern in the output.

To know more about linux and unix visit:

https://brainly.com/question/28486809

#SPJ11

int g( void ) { printf("Inside function g\n"); int h( void ) { printf("Inside function h\n" ); } } ** 5) Assume int b[ 10 ] = {0}, i; for (i = 0; i <= 10; i++) { b[i] = 1; } 4) int g( void ) { printf("Inside function g\n"); int h( void ) { printf("Inside function h\n" ); } } ** 5) Assume int b[ 10 ] = {0}, i; for (i = 0; i <= 10; i++) { b[i] = 1; }

Answers

The provided code contains a syntax error in both cases. In the first case, there is a nested function declaration inside function g, which is not allowed in the C programming language. In the second case, the loop tries to access the array element at index 10, which is out of bounds since the valid indices for array b are from 0 to 9.

In the first case, the nested function h is declared inside function g, which is not supported in standard C. Nested functions are not allowed in the C programming language. Each function should be defined separately, outside of any other function.

In the second case, the loop tries to access b[10] even though the valid indices for array b are from 0 to 9. This will result in accessing memory beyond the bounds of the array, leading to undefined behavior. To fix this, the loop condition should be i < 10 instead of i <= 10 to ensure all array indices are within the valid range.

It's important to write correct and valid code to avoid syntax errors and undefined behavior, which can lead to unexpected program crashes or incorrect results.

Learn more about array here: https://brainly.com/question/31605219

#SPJ11




6. Plot the autocorrelation function of a length 11 barker code that could be used for a radar with compressed pulse.

Answers

The autocorrelation function of a length 11 barker code can provide valuable insights into the pulse compression radar system. It is an important tool that can be used to evaluate the performance of the radar system.

The autocorrelation function of a length 11 barker code can be plotted to get an insight into how the pulse compression radar system can work. The barker code is a code sequence used in radar systems for pulse compression and has excellent autocorrelation properties. An autocorrelation function shows the similarity between a signal and its delayed version. An autocorrelation function shows the correlation coefficient between a signal and its delayed version. The autocorrelation function of a length 11 barker code can be plotted using MATLAB code. To do this, use the "xcorr" function in MATLAB, which computes the cross-correlation of two signals.

The code snippet to plot the autocorrelation function of a length 11 barker code is shown below. It is recommended to use MATLAB software to visualize the autocorrelation function of a length 11 barker code. The code snippet is given below for your reference.

`barker = [1 1 1 -1 -1 -1 1 -1 -1 1 -1];

autocorr = xcorr(barker);

plot(autocorr);

The barker code is a sequence of binary codes that has excellent correlation properties. It has a fixed length and is used in pulse compression radar systems. The main purpose of using the barker code is to increase the range resolution of the radar system. The autocorrelation function of a barker code is used to measure the similarity between a signal and its delayed version. The barker code has a unique property that makes it suitable for pulse compression radar systems. The autocorrelation function of a length 11 barker code can be plotted using MATLAB. The code snippet is given above, which can be used to plot the autocorrelation function of a length 11 barker code.

To know more about function, visit:

https://brainly.com/question/11624077

#SPJ11

networks that form the internet are maintained by who?

Answers

The networks that form the internet are maintained by a combination of internet service providers (ISPs), network administrators, and network engineers.

The networks that form the internet are maintained by a combination of different entities. These include:

internet service providers (ISPs): ISPs are companies that provide internet access to users. They play a crucial role in maintaining the internet by managing the infrastructure that allows users to connect to the internet.network administrators: Network administrators are responsible for managing and maintaining the networks within an organization. They ensure that the network infrastructure is functioning properly and address any issues that may arise.network engineers: Network engineers are involved in designing, implementing, and troubleshooting network infrastructure. They work to ensure that the networks are efficient, secure, and reliable.

In addition to ISPs, network administrators, and network engineers, there are also organizations such as the Internet Corporation for Assigned Names and Numbers (ICANN) that oversee the management of domain names and IP addresses. These organizations play a crucial role in maintaining the internet's infrastructure.

Learn more:

About internet networks here:

https://brainly.com/question/32461706

#SPJ11

Networks that form the internet are maintained by Network Service Providers (NSPs).

NSPs are companies or organizations that own and operate the infrastructure necessary for connecting networks and providing access to the internet. They are responsible for managing the physical network infrastructure, such as fiber optic cables, routers, and data centers, that allows data to be transmitted across the internet. NSPs also handle tasks like routing data packets, ensuring network reliability and performance, and providing internet connectivity to end-users. Some examples of NSPs include telecommunications companies, internet service providers (ISPs), and large technology corporations. Therefore, the answer is Network Service Providers (NSPs).

You can learn more about Network Service Providers  at

https://brainly.com/question/28180295

#SPJ11

Assume you are the employer of a software development company, the software developers in your company are highly skilled with solid experience and strong dedication to mobile application development. With reference to situational leadership theory, which one out of the four styles is best - telling, participating, delegating, selling? (Choose 1 only)

Answers

As the employer of a software development company, you have highly skilled and dedicated software developers. When considering the situational leadership theory, the most effective style would depend on the specific situation and the readiness level of your developers.


The selling style involves a high level of leader involvement and a high level of follower involvement. In this style, the leader provides clear direction and guidance while also encouraging active participation and collaboration from the team members. This style is beneficial when the team members have a moderate level of competence and commitment.

For example, let's say your software developers have solid experience and skills in mobile application development, but they may not have worked on a particular project before. In such a situation, the selling style would be appropriate. You, as the employer, would provide clear instructions and explain the project's objectives and requirements. Additionally, you would involve the team members in decision-making processes, seeking their input and encouraging their active participation.
To know more about employer visit:

https://brainly.com/question/17459074

#SPJ11

1- Given the dependency diagram illustrated in Figure 1 answer the following questions. C1 C2 C3 C4 C5 Figure 1 - Depency Diagram a) Identify all indicated dependencies and discuss their dependency type. b) Normalize the database to at 2NF level. Show the dependency diagram for each table in 2NF. c) Normalize the database to 3NF level. Show the dependency diagram for each table in 3NF.

Answers

In the given dependency diagram (Figure 1), the indicated dependencies are as follows.

- C1 depends on C2 and C4.
- C2 depends on C3 and C5.
- C3 depends on C4.
- C4 depends on C5.

Based on these dependencies, we can identify the dependency types as follows: C1 has a partial dependency on C2 and C4, meaning C1 depends on a part of the candidate key (C2) and another attribute (C4).By normalizing the database to 2NF and 3NF.
[tex](C2, C4) -> (C1)(C3) -> (C2, C5)[/tex]


To normalize the database to 3NF, we need to remove transitive dependencies. We can create three tables: one with the candidate key (C2, C4) and the dependent attribute (C1), another with the candidate key (C3) and the dependent attribute (C2), and a third with the candidate key (C3) and the dependent attribute (C5). The dependency diagram for each table in 3NF is as follows.
[tex](C2, C4) -> (C1)(C3) -> (C2)(C3) -> (C5)[/tex]
To know more about dependency visit:

https://brainly.com/question/30094324

#SPJ11

The result of adding +59 and −90 in binary is A) 00011111 B) 11100001 C) 11010001 D) 11111111 E) None of the above Let assume that a processor has carry, overflow, negative and zero flags and in performs addition of the following two unsigned number 156 and 114 with 8 bits representation. After the execution of this addition operation, the status of the carry, overflow, negative and zero flags, respectively will be: (A) 1,0,00 B) 1,0,1,0 C) 0,1,1,1 D) 0,0,1,1 E) None of the above The optional fields in an assembly instruction are: A) Label kcornmens B) Label \& meumonicC) Label koperand D) Operand \& mneumonie E) None of the above You can write an assembly instruction using only: A) Label scommen B) mneumonic \& operang C) Label \&operand D) comment\&operand E) None of the above is used to identify the memory location. A) comment B) mneumonic C) operand D) B&C E) None of the above is used to specify the operation to be performed. A) Label B) mneumonic C) operand D) comment E) None of the above is used to specify the operand to be operated on. B) mneumonic C) operand D) Label E) None of the above The addressing mode of this instruction LDDA#/5 is A) IMM B) DIR C) EXT D) IDX E) None of the above

Answers

The result of adding +59 and -90 in binary is option E) None of the above. The provided options do not represent the correct binary result of the addition.

For the second question, after performing the addition of the unsigned numbers 156 and 114 with 8-bit representation, the status of the carry, overflow, negative, and zero flags will be option C) 0, 1, 1, 1 respectively.

Regarding the optional fields in an assembly instruction, the correct option is A) Label kcornmens.

To write an assembly instruction, you can use option B) mneumonic & operand.

The memory location is identified by option C) operand.

The operation to be performed is specified by option B) mneumonic.

To specify the operand to be operated on, you use option C) operand.

Finally, the addressing mode of the instruction LDDA#/5 is option E) None of the above. The provided options do not represent any of the valid addressing modes.

You can learn more about assembly instruction at

https://brainly.com/question/13171889

#SPJ11

Jump to level 1 Write an if-else statement for the following: If numDifference is not equal to -16, execute totalDifference = -10. Else, execute totalDifference = numDifference. 1 #include 2 using namespace std; 4 int main() { 5 int totalDifference; 6 int numDifference; cin >> numDifference; // Program will be tested with values: -13 -14 -15 -16. * Your code goes here */ cout << totalDifference << endl; 10 11 12 13 14 15} return 0; }

Answers

This if-else statement checks the value of numDifference and assigns the appropriate value to totalDifference. If numDifference is not equal to -16, totalDifference is set to -10. Otherwise, totalDifference is set to the value of numDifference. The final value of totalDifference is then printed.

Here's the if-else statement you requested:

cpp

Copy code

#include <iostream>

using namespace std;

int main() {

   int totalDifference;

   int numDifference;

   cin >> numDifference;

   

   if (numDifference != -16) {

       totalDifference = -10;

   } else {

       totalDifference = numDifference;

   }

   

   cout << totalDifference << endl;

   

   return 0;

}

Explanation:

We declare the totalDifference and numDifference variables to store the values.

We use cin to read the value of numDifference from the user.

The if-else statement checks if numDifference is not equal to -16. If it is not equal, it executes the code block inside the if statement, setting totalDifference to -10.

If numDifference is equal to -16, the code block inside the else statement is executed, setting totalDifference to the value of numDifference.

Finally, we print the value of totalDifference using cout.

To know more about print visit :

https://brainly.com/question/31087536

#SPJ11

Please Help With The Last 3 Tables!
You are analyzing the data for presenting to the webmaster Construct simple cell formula by doing the following: In cell L12: Using the Sum function, compute the total number of users who visited the

Answers

The total number of users who visited the website can be computed using the Sum function in cell L12.

To calculate the total number of users, you can use the Sum function in Excel. The Sum function allows you to add up a range of values. In this case, you need to sum the values from the three tables to determine the total number of users.

First, select cell L12 where you want to display the result. Then, enter the Sum function: "=SUM(" followed by the range of cells containing the number of users in each table.

For example, if the number of users in Table 1 is in cells A2 to A10, Table 2 in cells B2 to B10, and Table 3 in cells C2 to C10, your formula would look like this: "=SUM(A2:A10,B2:B10,C2:C10)".

Press Enter, and the formula will calculate and display the total number of users who visited the website.

Learn more about  Function

brainly.com/question/30721594

#SPJ11

Design a traffic light using Arduino where the red light will be
ON for 3 seconds, the Yellow light will be ON for half a second,
and the green light will be ON for 3 seconds and vice versa.

Answers

Arduino is a microcontroller that is commonly used to develop prototypes. Arduino is an open-source platform that allows developers to create and share a wide range of interactive gadgets.

Traffic light controllers can be made using an Arduino platform, which offers several advantages such as low cost, small size, ease of programming, and so on.

The traffic light system has three colors: red, yellow, and green. The red light indicates that traffic should stop, while the green light indicates that traffic should proceed. The yellow light indicates that drivers should be cautious and get ready to stop or proceed. A timer is needed to regulate how long each color light is displayed.

The following is a step-by-step guide to designing a traffic light system using Arduino:

Step 1: The components required for the project are:

Arduino Board, Red, Yellow and Green LEDs, Jumper wires, and a Breadboard

Step 2: Connect the LEDs to the breadboard.

Step 3: Connect the longer leg of each LED to the digital pin on the Arduino board.

Step 4: Connect the shorter leg of the LEDs to the negative rail of the breadboard.

Step 5: In the Arduino IDE, write the code for the project.


Here is the code snippet that you can use for this project:

int redLED = 12;
int yellowLED = 11;
int greenLED = 10;

void setup() {
 pinMode(redLED, OUTPUT);
 pinMode(yellowLED, OUTPUT);
 pinMode(greenLED, OUTPUT);
}

void loop() {
 digitalWrite(redLED, HIGH);
 delay(3000);
 digitalWrite(redLED, LOW);
 
 digitalWrite(yellowLED, HIGH);
 delay(500);
 digitalWrite(yellowLED, LOW);
 
 digitalWrite(greenLED, HIGH);
 delay(3000);
 digitalWrite(greenLED, LOW);
 
 digitalWrite(yellowLED, HIGH);
 delay(500);
 digitalWrite(yellowLED, LOW);
}

This is a very simple code snippet that can be used for designing a traffic light system. The code controls the LEDs by switching them on and off and setting the duration for each color.

To know more about interactive visit:

https://brainly.com/question/31385713

#SPJ11

WRITE A PROGRAM TO WONDER WEATHER
Introduction
Your assignment is to write a program that can look up some
low-temperature records (Links to an external site.) from a
dictionary. Below is a list of so

Answers

The program first creates a dictionary called `low_temperatures` that contains the low-temperature records for six cities. Then, it asks the user to enter a city name. The program checks whether the city is in the `low_temperatures` dictionary and prints the result. If the city is in the dictionary, the program prints the city name and its low temperature. Otherwise, the program prints a message saying that the city is not in the low-temperature records.

To write a program to wonder weather, you will need to use a dictionary that contains low-temperature records. The program will check the dictionary to determine whether a particular city has a low temperature or not. Here's a possible implementation of the program in Python:```# Create a dictionary containing low-temperature recordslow_temperatures = {'Chicago': -27, 'New York': -23, 'Boston': -18, 'Denver': -29, 'Los Angeles': 1, 'Miami': 6}# Ask the user to enter a cityname = input('Enter a city name: ')# Check whether the city is in the dictionary and print the resultif name in low_temperatures:    print(f'{name} has a low temperature of {low_temperatures[name]} degrees.')else:    print(f'{name} is not in the low-temperature records.')```

To know more about low_temperatures, visit:

https://brainly.com/question/17814995

#SPJ11

C++
Hardware Use your mbed to build a hardware consisting of the following: 1. An LCD module 2. A digital input in the form of a push button or a jumper wire. The default state of the digital input is Low

Answers

C++ is an object-oriented programming language that is widely used in the development of operating systems, applications, games, and other software applications.

One of the most important aspects of C++ programming is hardware interfacing, which allows developers to create software that interacts with hardware components in various ways.In this task, we will be using mbed to create a hardware consisting of an LCD module and a digital input in the form of a push button or a jumper wire. The default state of the digital input is Low.

To begin, we need to set up our hardware. We will need an mbed board, an LCD module, and a digital input in the form of a push button or a jumper wire. The LCD module should be connected to the mbed board according to the manufacturer's instructions, and the digital input should be connected to one of the mbed's digital input pins.Once we have our hardware set up, we can begin programming.

First, we need to include the necessary libraries. We will need the mbed.h library for accessing the mbed's GPIO pins, and the LCD.h library for controlling the LCD module.

To know more about programming visit:

https://brainly.com/question/14368396

#SPJ11

Modify the points class to include the follows:
1- Overload the outstream method as a friend method with display
a point x and y as follows: for a point with x=4, and y=5, your
outstream will return t

Answers

Here's a modification of the points class including the requested overloaded outstream method:```#include
using namespace std;

class points
{
   private:
   int x,y;

   public:
   points(int a=0,int b=0)
   {
       x=a;
       y=b;
   }
   friend ostream &operator<<( ostream &output, const points &P )
   {
       output << "x : " << P.x << " y : " << P.y;
       return output;            
   }
};

int main()
{
   points p1(4,5);
   cout << p1;
   return 0;
}```In the above code, we have modified the class "points" to include an overloaded "outstream" method as a friend method which is capable of displaying a point with x=4 and y=5. This method will return t when we pass a point with the above-specified values as arguments to it.The output of the code is:```x : 4 y : 5```

To know more about  overloaded outstream method visit:

https://brainly.com/question/19545428

#SPJ11

Other Questions
We tried to derive the circumference of a circle with radius r in two different ways: the first try ended up in a complicated formula, while the second try almost succeeded; but we somehow mired in some unknown mistake. Here you will try it: a) Write down the equation of a circle with radius r with center placed at the origin b) Rewrite the equation in the functional form: y=f(x) for the upper hemisphere of the circle within [r,r] c) Write down the arc length formula of the function y = f(x) in the form of a definite integral (so we compute the upper half of the circumference). d) To solve it, use the substitution x = rsint, then rewrite the definite integral e) Compute the integral to its completion with the definite integral The concept that a law enforcement officer may confiscatecontraband or evidence in a place they are legally allowed to be inwithout a search warrant is known as?a. The confiscation rule. Higher capital requirement is a ____________ for new entrants.Group of answer choicesBargaining powerSubstitute productSupplier powerThreat of entry In 19th century, geologists developed the geologic time scale using a. fossils. b. radiometric dating techniques. c. absolute ages. d. the principle of uniformitarianism. a chemical that disrupts the production of bacterial cell walls. PYTHON PROGRAMConsider the file. This file records the access that auser makes when visiting a web page. Each line of the log has thefollowing items:a host (for example, ' ' 7. DefG Enterprises issues bonds with a \( \$ 1,000 \) face value that make coupon payments of \( \$ 10 \) every 2 months. What is the coupon rate? A) \( 1.5096 \) B) \( 3.00 \% \) C) \( 6.00 \% \) D) Write SELECT statements that use subquery approach to execute following requests: a) Display start date and end date of all exhibitions held in Kuala Lumpur b) Display name of artists who had produced paintings. c) List the exhibitions (code) which were/will be exhibiting artwork named Monalisa. Write SELECT statements that use set operations to execute following requests: a) Display artworks names which appear in both painting and sculpture types of artwork b) Display names of all artists from Italy followed all artists from Egypt. LOCATION (ICode, IName, IAddress) ARTIST (aID, aName, aCountry) EXHIBITION (eCode, eName) EXHIBITIONLOCDATE (eCode, lCode, eStartDate, eEndDate) ARTOBJECT (aolD, aoName, aoType, aID) ARTEXHIBITED (eCode, ICode, qolD, boothNo) [Note: 1. Underlined attributes are primary/composite keys of the relations \& italicized attributes are foreign keys. 2. I = location, a = artist, e = exhibition, ao = artObject ] Location Customers can have multiple locations. Attributes of location are Customer ID (identifier), Location ID (which is unique only for each Customer ID), Address (which is composed of Street, City, State, and Zip Code), Telephone, and Building Size 17. Develop an EER model for the following situation using the traditional EER notation, the Visio notation, or the sub- types inside supertypes notation, as specified by your instructor Wally Los Gatos and his partner Henry Chordate have formed a new limited partnership, Fin and Finicky Security Consultants. Fin and Finicky consults with cor-Service porations to determine their security needs. You have A security service is performed for a customer at one or been hired by Wally and Henry to design a database management system to help them manage their business more locations. Before services are performed, an esti- mate is prepared. Attributes of service are Service ID ue to a recent increase in business, Fin and Finicky(identifier), Description, Cost, Coverage, and Clearance has decided to automate their client tracking system You and your team have done a preliminary analysis and come up with the following set of entities, attrib- utes, and business rules: Required Additional Business Rules In addition to the entities outlined previously, the fol- lowing information will need to be stored to tables and should be shown in the model. These may be entities but they also reflect a relationship between more than one entity: Consultant There are two types of consultants: business consult- ants and technical consultants. Business consultants are contacted by a business in order to first determine security needs and provide an estimate for the actual services to be performed. Technical consultants per- form services according to the specifications devel oped by the business consultants Estimates, which have characteristics of Date, Amount, Business Consultant, Services, and Customer .Services Performed, which have characteristics of Date, Amount, Technical Consultant, Services, and Customer Attributes of business consultant are the following Employee ID (identifier), Name, Address (which is com-the following: posed of Street, City, State, and Zip Code), Telephone, Date Of Birth, Age, Business Experience (which is com- posed of Number of Years, Type of Business [or busi- nesses], and Degrees Received) In order to construct the EER diagram, you may assume A customer can have many consultants providing many services. You wish to track both actual serv ices performed as well as services offered. Therefore there should be two relationships between cus- tomer, service, and consultant, one to show services performed and one to show services offered as part of the estimate. Attributes of technical consultant are the following Employee ID (identifier), Name, Address (which is com- posed of Street, City, State, and Zip Code), Telephone, Date Of Birth, Age, Technical Skills, and Degrees Received. Customer Customers are businesses that have asked for consulting services. Attributes of customer are Customer ID (iden- tifier), Company Name, Address (which is composed of Street, City, State, and Zip Code), Contact Name, Contact Title, Contact Telephone, Business Type, and Number Of Employees change into indirect speech the new student said to me" are you a class captain? You just bought a Mercedes Sprinter van for $55000 and plan on owning for the next 10 years. You plan on driving it an average of 15000 per year. The cost per mile is expected to be $1.1 in the first year and increase by 0.030 per year thereafter. What is your average annual cost for owning the van over the 10 years at an interest rate of 0.070 per year? What attributes or skills have you developed during your timeat university? What knowledge and skills do you have that set you apart fromthe rest of graduates? What is your passion? What Sort the given numbers using Merge sort. [31, 20,40,12, 30, 26,50,10]. Show the partially sorted list after each complete pass of merge sort? Please give an example of internal sorting algorithm and w Which statement about modern Israel is most accurate?It is made up only of Jewish people. It is the homeland for Jewish people. It has been a Jewish holy site for less than 20 years.It features ancient architecture and rejects modern design. Describe roughly how machine learning can be used to build aspam filter. what were bernard tschumi's aims in designing the parc de la villette? 9. [-/1 Points] DETAILS OSCOLPHYS1 26.2.022. MY NOTES ASK YOUR TEACHER PRACTICE ANOTHER A mother sees that her child's contact lens prescription is +2.50 D. What is the child's near point, assuming the contact lens is designed to enable the child to see objects 25.0 cm away clearly? cm Additional Materials Reading Use the periodic table to calculate the molar mass of each of the following compounds. Each answer must have 2 decimal places.Ammonia (NH3): g/molMagnesium hydroxide (Mg(OH)2): g/molIron(III) oxide (Fe2O3): g/mol Crowdsourcing is reaching out to a group (crowd) as a way to solve a problem. Which of the following provides a way to raise funds without web development expenses?a. Crowdsourcing mediab. Crowdsourcing platformc. Crowdsourcing websited. Crowdsourcing campaign Based on the function 1/(x^3(x^21)(x^2+3)^2)write the FORM of the partial fraction decomposition