1) First, calculate how much carpet is needed if your bedroom is 14 feet long and 11.5 feet wide. Algebraic formula that will be used to find this amount: ​

It would cost approximately $52.18 to drive from Statesville, NC to Washington, DC with a car that gets 29 miles per gallon on the interstate, considering a gas cost of $3.89 per gallon.

To calculate the time it would take to drive from Statesville, NC to Washington, DC, we can divide the distance of 389 miles by the average speed of 65 mph.

Time = Distance / Speed

Time = 389 miles / 65 mph

Time ≈ 5.98 hours

Therefore, it would take approximately 5.98 hours to drive from Statesville, NC to Washington, DC on interstates with an average speed of 65 mph.

To calculate the cost of driving to Washington, DC, we need to know the number of gallons of gas required for the trip. We can find this by dividing the distance by the car's mileage, which is 29 miles per gallon.

Number of gallons = Distance / Mileage

Number of gallons = 389 miles / 29 miles per gallon

Number of gallons ≈ 13.41 gallons

The cost of gas can be calculated by multiplying the number of gallons by the cost per gallon, which is $3.89.

Cost = Number of gallons * Cost per gallon

Cost ≈ 13.41 gallons * $3.89/gallon

Cost ≈ $52.18

Therefore, it would cost approximately $52.18 to drive from Statesville, NC to Washington, DC with a car that gets 29 miles per gallon on the interstate, considering a gas cost of $3.89 per gallon.

for such more question on cost

https://brainly.com/question/25109150

#SPJ8

Answer:

Based on the provided information, the table summarizes service times (in seconds) of dinners at a fast food restaurant. To determine the number of individuals included in the summary, we can sum up the frequencies listed in the table:

7 + 24 + 14 + 1 + 4 = 50

Therefore, there are 50 individuals included in the summary.

Regarding the exact values of all the original service times, it is not possible to determine them precisely based on the given information. The table only provides ranges of service times and their corresponding frequencies. We can determine the range within which each individual's service time falls, but we cannot determine the exact value within that range.

Answer:

p ≈ -0.9

Step-by-step explanation:

2.5p + 1 = 1.4p

2.5p = 1.4p - 1

1.1p = -1

p ≈ -0.9

So, p ≈ -0.9

Answer:

6.24 x [tex]10^{-7}[/tex]

Step-by-step explanation:

0.000000624 in scientific notation is 6.24 x [tex]10^{-7}[/tex]

Answer:

Step-by-step explanation:

The resulting number is in scientific notation. In this case, the number is 6.24 * 10^-7.

Answer:

250

Step-by-step explanation:

[tex]x+0.22x=305\\1.22x=305\\x=250[/tex]

Answer:

250

Step-by-step explanation:

so when you add 22% to 250 it equals 305

[tex]f(4)=4\\f(-5)=1\\x=-4,2[/tex]

The first equation is incorrect.

The second equation is correct.

The third equation is correct.

Let's go through each equation and determine whether it is correct or incorrect:

(b²+7b-9)+(4b-6b²) = -8b² + 14b-9

To determine if this equation is correct, we need to simplify both sides and check if they are equal.

On the left side:

(b²+7b-9)+(4b-6b²) = b² - 6b² + 7b + 4b - 9 = -5b² + 11b - 9

On the right side:

-8b² + 14b - 9

Comparing both sides, we can see that -5b² + 11b - 9 is not equal to -8b² + 14b - 9. Therefore, the equation is incorrect.

(4a+6)-(3a²-9a+1)=-3a²+ 13a +5

Again, we need to simplify both sides of the equation and check if they are equal.

On the left side:

(4a+6)-(3a²-9a+1) = 4a + 6 - 3a² + 9a - 1 = -3a² + 13a + 5

On the right side:

-3a² + 13a + 5

Comparing both sides, we can see that -3a² + 13a + 5 is equal to -3a² + 13a + 5. Therefore, the equation is correct.

(12c-8c²)+(5c²- 10c) = -3c²+2c

Again, let's simplify both sides and compare them.

On the left side:

(12c-8c²)+(5c²- 10c) = 12c - 8c² + 5c² - 10c = -3c² + 2c

On the right side:

-3c² + 2c

Comparing both sides, we can see that -3c² + 2c is equal to -3c² + 2c. Therefore, the equation is correct.

For more such questions on equation visit:

https://brainly.com/question/17145398

#SPJ8

Answer:

answer is 749.07

just use the formula and put values for radius and height. you can find formula online or leave me a comment if you can't find it.

The pattern in the residual plot indicates the following about the type of model: C. The pattern is random, indicating a good fit for a linear model.

In Mathematics and Geometry, a residual plot is sometimes referred to as scatter plot and it can be defined as a type of graph which is used for the graphical representation of the values of two (2) variables, with the resulting points showing any association or correlation (relationship) between the data set.

In Mathematics, a residual value is a difference between the measured (given or observed) value from a residual plot (scatter plot) and the predicted value from a residual plot (scatter plot).

By critically observing the residual plot which shows a relationship between the residuals and carbs in grams, we can logically deduce that a linear model is the most appropriate because there isn't a clear pattern between the data points i.e a random pattern.

Read more on residual plot here: https://brainly.com/question/16594090

#SPJ1

Complete Question:

What does the pattern in the residual plot indicate about the type of model?

A. The pattern is random, indicating a good fit for a nonlinear model.

B. The pattern shows the points are far from the zero line, indicating a good fit for a linear model.

C. The pattern is random, indicating a good fit for a linear model.

D. The pattern shows the points are far from the zero line, indicating a good fit for a nonlinear model.

E. The pattern is random, indicating that the model is unable to be determined.

Fraction 7/3 is convertible to a decimal. It is a proper fraction. Because here the numerator is lesser than the denominator. Any fraction can be represented as a decimal number.

To transform the fraction into a decimal, it has to go through a process of division. It will be like this, 7÷3.

During the process of the division after the use of the decimal point, the same number will keep repeating. The number that keeps repeating is known as the recurring number.

If 7 is divided by 3, the result is 2.333333. Here the digit 3 is recurring. So the representation of 7/3 as a decimal is 2.333333.

Try more decimal sums:

https://brainly.com/question/28393353

This means that she made a 20% return on the money she invested in the property. For every dollar she invested, she earned 20 cents in profit.

To calculate Jennifer Aniston's return on investment (ROI), we can use the formula:

ROI = (Net Profit / Initial Investment) * 100

First, let's calculate the net profit. The net profit is the selling price minus the initial investment:

Net Profit = Selling Price - Initial Investment

Net Profit = $2,200,000 - $2,000,000

Net Profit = $200,000

Next, we calculate the ROI:

ROI = (Net Profit / Initial Investment) * 100

ROI = ($200,000 / $1,000,000) * 100

ROI = 0.2 * 100

ROI = 20%

Jennifer Aniston's return on investment for this property is 20%.

For more such questions on invested visit:

https://brainly.com/question/25893158

#SPJ8

The length of u, to the nearest inch, is 1818 inches.

To solve this problem, we can use the Law of Sines, which states that the ratio of the length of a side of a triangle to the sine of its opposite angle is constant.

In this case, we'll use the following formula:

a/sin(A) = b/sin(B) = c/sin(C)

Let's label the sides and angles of the triangle:

Side a = u (length of u)

Side b = t (820 inches)

Side c = v (length of v)

Angle A = m/U (132°)

Angle B = m2V (25°)

Angle C = 180° - A - B (as the sum of angles in a triangle is 180°)

Now, we can use the Law of Sines to set up the equation:

u/sin(A) = t/sin(B)

Plugging in the given values:

u/sin(132°) = 820/sin(25°)

To find the length of u, we'll solve this equation for u.

u = (820 [tex]\times[/tex] sin(132°)) / sin(25°)

Using a calculator, we can evaluate the right side of the equation to get the approximate value of u:

u ≈ (820 [tex]\times[/tex] 0.9397) / 0.4226

u ≈ 1817.54 inches

Rounding to the nearest inch, we have:

u ≈ 1818 inches

For similar question on Law of Sines.

https://brainly.com/question/30401249  

#SPJ8

Answer:

The total surface area is given by: base area + 4 * triangular face area

Substituting the values we calculated: 52441 + 4 * 10424.4 ≈ 91588.4 square meters.

Therefore, the surface area of the square pyramid is approximately 91588.4 square meters.

Answer: The second one, 3×5

Step-by-step explanation:

We can use a factor tree to determine the prime factorization of 15. We first choose factors of 15, and the only factors we can use besides 1 and 15 are 3 and 5.

                                                             15

                                                            3×5

That is all, because the final numbers listed are prime and we cannot perform any further actions. The prime factorization of 15 is 3×5, or in exponential form, [tex]3^1[/tex]×[tex]5^1[/tex].

Note: You may notice with other numbers that there are several factors to choose from. That's okay, because in the end it will give you the same result.

Hope this helps!

Answer: 12

Step-by-step explanation:

Answer:

es 362770

Step-by-step explanation:

saque esta imformacion de la calculadora

Answer:

10 + 4i

Step-by-step explanation:

To solve this, just combine the like terms:

[tex]\sf{(6+9i)+(4-5i)}[/tex]

[tex]\sf{6+9i+4-5i}[/tex]

[tex]\sf{6+4+9i-5i}[/tex]

[tex]\sf{10+4i}[/tex]

Hence, the answer is 10 + 4i

Answer: 102 dollars/4.5x+75

Step-by-step explanation: Your question isn't really straightforward, x x snacks for everybody to share? Please elaborate, and are they talking about the total cost, or just the cost of 6 snacks?

First, we have to take into account that if SADIE is taking her FOUR kids, there will be 5 people.

Cost of tickets is equal to $15 per one, and

5x (where x=15, per 5)

5(15)=75, and now onto the snacks

4.5x2=9, and 6/2=3, so 9x3=27, or 4.5x6=27

75+27=102

then for x snacks, if 1 snack costs 4.5 dollars than it'd be 4.5x (x number of snacks)+75 to find the total cost with tickets and all.

The result of dividing (4x³ + 6x² + 20x + 9) by (2x + 1) using long polynomial division is 2x² + 2x + 9 with a remainder of 0.

To divide the polynomial (4x³ + 6x² + 20x + 9) by (2x + 1) using long polynomial division.

Arrange the terms of the dividend and the divisor in descending order of the degree of x:

      2x + 1 | 4x³ + 6x² + 20x + 9

Divide the first term of the dividend by the first term of the divisor and write the result on the top line:

             2x + 1 | 4x³ + 6x² + 20x + 9

                   | 2x²

Multiply the divisor (2x + 1) by the quotient obtained in the previous step (2x²) and write the result below the dividend:

             2x + 1 | 4x³ + 6x² + 20x + 9

           - (4x³ + 2x²)

           ---------------

                        4x² + 20x + 9

Subtract the result obtained in the previous step from the dividend and bring down the next term.

             2x + 1 | 4x³ + 6x² + 20x + 9

           - (4x³ + 2x²)

           ---------------

                        4x² + 20x + 9

                      - (4x² + 2x)

                      ---------------

                               18x + 9

Repeat the process by dividing the term brought down (18x) by the first term of the divisor (2x):

             2x + 1 | 4x³ + 6x² + 20x + 9

           - (4x³ + 2x²)

           ---------------

                        4x² + 20x + 9

                      - (4x² + 2x)

                      ---------------

                               18x + 9

                             - (18x + 9)

                             ---------------

                                         0

The division is complete when the degree of the term brought down becomes less than the degree of the divisor.

In this case, the degree of the term brought down is 0 (a constant term). Since we can no longer divide further, the remainder is 0.

Therefore, the result of the division is:

Quotient: 2x² + 2x + 9

Remainder: 0

For similar question on polynomial division.

https://brainly.com/question/24662212  

#SPJ8

The recursive function that represents the number of books Ashley has at any time is Number of books(n) = Number of books(n-1) - n, starting at 100.

The recursive function that represents the number of books Ashley has at any time can be defined as follows:

Number of books(n) = Number of books(n-1) - n

Starting point: Number of books(0) = 100

Explanation:

In the recursive function, "n" represents the number of weeks that have passed. Each week, Ashley gives away "n" books. Therefore, the number of books she has at any time is equal to the number of books she had in the previous week (Number of books(n-1)) minus the number of books given away in the current week (n).

The starting point is given as Number of books(0) = 100, which means initially Ashley has 100 books before any weeks have passed.

for such more question on recursive function

https://brainly.com/question/25762866

#SPJ8

first of all, you need to assume that this shape is like a cone. So cone has a height and you can find it by using Thales's theorem. so it would be

[tex] \frac{x}{x + 6} = \frac{4}{8} [/tex]

x is 6. So the total height of the cone has founded.

To find the volume of this frustum we have to subtract the volume of the small cone(at the top of the frustum) which has 6 cm in height from the big cone with 12 cm in height.

big cone Volume: ⅓(8²π×12)

-

small cone Volume: ⅓(4²π × 6)

=

frustum volume : 224π

The output value is feasible. The input value is not feasible, the possible solution of (6.5, $17.50) does not make sense for this function. The correct answer is No. The input is not feasible.

Jade decided to rent movies for a movie marathon over the weekend.

The function g(x) represents the amount of money spent in dollars, where x is the number of movies.

The given function is g(x) which represents the amount of money spent in dollars, where x is the number of movies.

The solution given is (6.5, $17.50).

We need to find whether the solution makes sense for the given function or not.

The input is given as 6.5 and the output is given as $17.50.

This means that Jade rented 6.5 movies and spent $17.50 on renting those movies.

To check whether the solution makes sense or not, we need to see if the input and output values are feasible or not.

The input value 6.5 is not a feasible value because it is not possible to rent half a movie.

Jade can rent 6 movies or 7 movies but not 6.5 movies.

Therefore, the input value is not feasible.

On the other hand, the output value $17.50 is a feasible value because it is possible for Jade to spend $17.50 on renting 6 movies.

The output value is feasible.

Since the input value is not feasible, the possible solution of (6.5, $17.50) does not make sense for this function. The correct answer is No. The input is not feasible.

For more related questions on feasible:

https://brainly.com/question/32957392

#SPJ8

Answer:

We need more information to accurately predict the population in 2016. The following information is needed:

The initial population (population in a given baseline year)

The known population decrease rate as a percentage or absolute number per year

For example, if:

The initial population (in 2010) was 10,000

The population is decreasing at a constant rate of 100 people per year

Then we can calculate the population in 2016 as follows:

2010 population: 10,000

2011 population: 10,000 - 100 = 9,900

2012 population: 9,900 - 100 = 9,800

2013 population: 9,800 - 100 = 9,700

2014 population: 9,700 - 100 = 9,600

2015 population: 9,600 - 100 = 9,500

2016 population: 9,500 - 100 = 9,400

Therefore, based on this information, the predicted population in 2016 would be 9,400.

In summary, to accurately predict population changes over time, we need to know the initial population and population decrease rate. With that information, we can calculate the population for each subsequent year by subtracting the decrease amount from the population in the previous year.

Hope this helps! Let me know if you have any other questions.

Step-by-step explanation:

The coefficient of [tex]x^2y^3[/tex] in the expression [tex](2x+y)^5[/tex] is 10

To find the coefficient of the term containing [tex]x^2y^3\\[/tex] in the expansion of [tex](2x+y)^5[/tex], we can use the binomial theorem. The binomial theorem states that the expansion of [tex](a + b)^n[/tex] can be written as the sum of the binomial coefficients multiplied by the respective powers of a and b, where n is a positive integer.

In this case, we have [tex](2x + y)^5[/tex]. The term [tex]x^2y^3[/tex] can be obtained by selecting two x's from [tex](2x)^2[/tex] and three y's from [tex]y^3[/tex]. The coefficient of [tex]x^2y^3[/tex] will be the product of the corresponding binomial coefficients.

The binomial coefficients for this term can be calculated as follows:

Coefficient = C(5, 2) * C(3, 3)

C(n, k) represents the binomial coefficient, which is calculated as n! / (k! * (n - k)!), where "!" denotes the factorial operation.

Plugging in the values, we have:

Coefficient = C(5, 2) * C(3, 3)

[tex]= (5! / (2! * (5 - 2)!)) * (3! / (3! * (3 - 3)!))\\= (5! / (2! * 3!)) * (3! / (3! * 0!))\\= (5 * 4 * 3! / (2 * 1 * 3!)) * 1\\= (5 * 4) / (2 * 1)\\= 10.[/tex]

Therefore, the coefficient of [tex]x^2y^3[/tex] in the expression [tex](2x+y)^5[/tex] is 10.

To learn more about binomial theorem, refer:

brainly.com/question/222308

The probability of landing on the dark blue target is 2/5.

Probability is the ratio of required to the total possible outcomes of an event.

P(dark blue ) = 40/100

divide through by 20

P(dark blue ) = 2/5

Therefore, the probability of landing on target is 2/5

Learn more on probability:https://brainly.com/question/24756209

#SPJ1

Answer:

Step-by-step explanation:

Let h(x) = y

The exponentail function is of the form :

[tex]y = ab^x[/tex]

We have :

[tex]y_{_1} = ab^{x_{_1}}\\y_{_2} = ab^{x_{_2}}\\\\\implies \frac{y_{_1}}{y_{_2}} = \frac{ab^{x_{1}}}{ab^{x_{2}}} \\\\\implies \frac{y_{_1}}{y_{_2}} = \frac{b^{x_{1}}}{b^{x_{2}}} \\\\\implies \frac{y_{_1}}{y_{_2}} = b^{(x_1-x_2)}[/tex]

Given points : (4, 9) and (5, 34.2)

We have:

[tex]\frac{34.2}{9} = b^{(5-4)}\\\\\implies 3.8 = b[/tex]

Writing the equation with x, y and b:

[tex]y = ab^x\\\\\implies 9 = a(3.8^4)\\\\a = \frac{9}{3.8^4} \\\\a = 0.043[/tex]

a = 0.043

b = 3.8

When x = 6, y will be:

[tex]y = (0.043)(3.8^6)\\\\y = 128.47[/tex]

This is not the y value in the question y = 59.4

Therefore (6, 59.4) does not lie on the graph h(x)

Yes, there is a difference in the shapes of the displacement-time graphs for uniform acceleration towards the positive direction, uniform acceleration towards the negative direction, uniform deceleration towards the positive direction, and uniform deceleration towards the negative direction.

Uniform acceleration towards the positive direction:

In this case, the object's velocity increases in the positive direction over time. The displacement-time graph will have a concave-upward shape, forming a curve that starts with a small slope and gradually becomes steeper as time progresses.

Uniform acceleration towards the negative direction:

Here, the object's velocity increases in the negative direction, meaning it accelerates in the opposite direction to its positive direction.

The displacement-time graph will have a concave-downward shape, forming a curve that starts with a steep slope and gradually becomes less steep as time progresses.

Uniform deceleration towards the positive direction:

In this scenario, the object's velocity decreases in the positive direction, but it still moves towards the positive direction.

The displacement-time graph will show a curve with a decreasing slope, forming a concave-downward shape, indicating that the object is slowing down.

Uniform deceleration towards the negative direction:

Here, the object's velocity decreases in the negative direction, opposing its initial direction.

The displacement-time graph will have a curve with a decreasing slope, forming a concave-upward shape, indicating that the object is slowing down but still moving in the negative direction.

In summary, the shapes of the displacement-time graphs differ based on the direction and type of acceleration (positive or negative) and whether the object is undergoing uniform acceleration or uniform deceleration. These differences can be observed through the concavity and slope of the graphs.

For similar question on displacement-time.

https://brainly.com/question/28357012  

#SPJ8

The element 4 is an element of D ∩ (E ∩ F).

To find the intersection of sets D, E, and F, we need to determine the elements that are common to all three sets.

Set D consists of all whole numbers, so any whole number can be an element of set D.

Set E consists of perfect squares between 1 and 9. The perfect squares in this range are 1, 4, and 9.

Set F consists of even numbers greater than or equal to 2 and less than 9.

The even numbers in this range are 2, 4, 6, and 8.

Taking the intersection of sets E and F, we find that the common element is 4, as it is the only number that satisfies both conditions of being a perfect square and an even number in the given range.

Finally, taking the intersection of set D with the intersection of sets E and F, we find that the element 4 is also an element of set D ∩ (E ∩ F).

For similar question on element.

https://brainly.com/question/18096867  

#SPJ8

Answer:

a=55°

b=123°

c=55°

d=123°

The nth square number of the value given is the squared value of 19, which is 361

The nth square number , S is related by the formula :

Given that , n = 19

The nth square number , where n = 19 can be calculated thus:

S = -19² = 361

S = (-19) * (-19)

S = 361

Therefore, the 19th square number is 361

Learn more on nth term :https://brainly.com/question/7882626

#SPJ1