(1 point) At a point P in the xy-plane where distances are measured in feet, the unit tangent vector to an object's path is Jo(-3, 1), the curvature of its path at P is 0.8 feet-1, and its acceleration vector is (4,5) feet/second". (a) At what rate is the object speeding up at P? sqrt(25+16) ft/s^2 Include units on your answer. (b) What is the object's speed at P? sqrt(10) ft/s Include units on your answer.

Rotational equilibrium is the condition of motion where there is no angular acceleration. Since the torque is what causes the movement's acceleration, there is no total torque in the rotational equilibrium.

An object must satisfy two requirements of equilibrium in order to maintain static equilibrium. First, there must be no net force acting on the item. Second, there must be no net torque pulling on the object.

If a body meets the requirements below, it is said to be in rotational equilibrium: The forces operate within the same plane, cross at a common element, and finally, act within the same plane.

To know more about acceleration visit :

https://brainly.com/question/12550364

#SPJ4

The pressure when the volume is reduced to 0.42 L is (y - b) ÷ m.

Pressure is the force per unit area applied to a surface or object. In the physical sciences, pressure is a measure of the force exerted on a surface by a fluid, such as a gas or liquid. Pressure is the result of the weight of the fluid pushing down on a surface. In physics, pressure is often expressed as the ratio of force to area. Pressure is typically measured in units of pascals (Pa) or pounds per square inch (psi). Pressure can also be measured in atmospheres (atm), bars, or torr.

The equation for the line representing the relationship between Volume (L) and (1/pressure) is y = mx + b, where m is the slope and b is the y-intercept.
Since we know the Volume (L) is 0.42, we can use this value to solve for the pressure.
Using the equation, we can calculate the pressure by solving for x:
x = (y - b) ÷ m
Therefore, the pressure when the volume is reduced to 0.42 L is (y - b) ÷ m.

To learn more about pressure
https://brainly.com/question/26101731
#SPJ4

The potential difference between the two points is B. 1.6 x 10⁻⁴

The potential difference, also known as voltage, is the energy per unit charge that is transferred between two points in a circuit. We can use the formula:

V = E / Q

where V is the potential difference, E is the energy, and Q is the charge.

In this problem, we are given that the total energy gained by the electrons is 1.6 x 1010 J and the charge is Q = 1 x 10⁶ electrons. So, we can plug in these values into the formula:

V = 1.6 x 10-10 J / (1 x 10⁶) = 1.6 x 10⁻⁴ V

Therefore, the potential difference between the two points is 1.6 x 10⁻⁴ V.

Learn more about potential difference:

https://brainly.com/question/12198573

#SPJ4

After the water is ejected, the squid's final speed is 3 m/s in the opposite direction.

The dislocation that such an object a particle experiences in respect to time is expressed vectorially as pace. The meter a second (m/s) is the accepted unit measure velocity profile (also known as speed). The unidirectional speed of an item in motion, as measured by a specific unit of time and observed from a certain point of reference, is what is referred to as velocity.

mass m₁ = 1.5 kg

initial velocity, u₁ = 0

mass of water, m₂ = 0.1 kg

initial velocity , u₂ = 0

final velocity , v₂ = 45 m/s

conservation of linear momentum;

m₁u₁ + m₂u₂ = m₁v₁ + m₂v₂

1.5(0) + 0.1(0) = 1.5v₁ + 45(0.1)

0 = 1.5v₁ + 4.5

1.5v₁ = -4.5

v1 = (-4.5)/1.5

v1 = -3 m/s

To know more about velocity visit:

https://brainly.com/question/28738284

#SPJ4

The volume of the material is 27.14 m³ and the density of the material is 1.02 kg/m³.

The sample of the unknown material as a weight of 290 Newton in the air and when it is must in alcohol of specific gravity 0.70 it has a weight of 190 Newton.

We know,

B = VpG

B is buoyancy that will be 190N,

V is volume of material,

p is the density of alcohol,

G is the acceleration due to gravity,

Putting values,

190 = V(0.7)(10)

V = 27.14 m³

The volume of the material is 27.14 m³.

Now, we know,

Density = Mass/volume

Density = W/Vg

Putting values,

Density = 290/27.14×10

Density = 1.02 kg/m³.

So, the density of material is 1.02 kg/m³.

To know more about Density, visit,

https://brainly.com/question/1354972

#SPJ4

If the rubber stopper has a mass of 50 grams and the student is able to control the speed so that it is a constant 3.5 m/s at all points on the circle, then he will use the string half as the length of the original string.

A student is twirling a rubber stopper in a vertical circle of radius 0.95 m. If the rubber stopper has a mass of 50 grams and the student is able to control the speed so that it is a constant 3.5 m/s at all points on the circle. A physics student is performing a lab in which she twirls a rubber stopper at the end of a string around in a circle at nearly constant speed and tries to determine its acceleration. by the given primary information we can firmly conclude that if the rubber stopper has a mass of 50 grams and the student is able to control the speed so that it is a constant 3.5 m/s at all points on the circle, then he will use the string half as the length of the original string.

Learn more about Speed:

brainly.com/question/28224010

#SPJ4

The position vector is 2.76i+3.05j, the magnitude of the torque is 20.0055 N*m, and the direction of the torque is perpendicular to the plane.

A force is an influence that has the power to alter an object's motion. An object with mass can change its velocity, or accelerate, as a result of a force.

a. The position vector for the point where the force is applied is given by the coordinates of the point in the xy-plane. In this case, the point is at (2.76 m, 3.05 m), so the position vector is:

r = 2.76i + 3.05j

b. The torque with respect to the origin produced by F is given by the cross product of the position vector and the force vector. The magnitude of the torque is given by the formula:

τ = r x F

τ = (2.76i + 3.05j) x (7.25i - 3.03j)

τ = ((3.05)(-3.03) - (2.76)(7.25))i + ((2.76)(-3.03) - (3.05)(7.25))j

τ =20.0055 N*m

c. The direction of the torque with respect to the origin is given by the cross product of the position vector and the force vector, the direction is perpendicular to the plane formed by the position vector and the force vector. The direction of the torque is out of the plane in a direction perpendicular to the plane.

To know more about force, visit:

brainly.com/question/13191643

#SPJ4

The gravitational potential energy (GPE) of the nickel will increase as it falls to the ground due to the force of gravity acting on it.

When an object falls, it gains kinetic energy, which is the energy of motion. As an object falls, it gains kinetic energy at the expense of its potential energy.

The amount of GPE gained will be equal to the mass of the nickel multiplied by the acceleration due to gravity and the change in height from the worker's pocket to the ground. Specifically, the change in GPE = 0.005 kg [tex]* 9.8 m/s^2 * 169[/tex]*  m. As the nickel falls it will accelerate and its kinetic energy will increase as well. The nickel will convert the potential energy into kinetic energy and also will gain velocity as it falls, reaching a terminal velocity.

When the nickel reaches the ground, all of its potential energy will have been converted into kinetic energy.

To learn more about GPE,

https://brainly.com/question/29490129

#SPJ4

The velocity (in cm/s) of an object which moves 44 m in 2 s is 220 cm/s.

As per the given data:

Distance given as 44 m.

Time gives as 2s.

Velocity is to be calculated.

Conversion to distance from m to cm.

1m=100 cm

44m=4400 cm

The formula for velocity is:

Velocity = Distance / Time

Velocity = 4400 / 2

=220 cm/s

The velocity of the object is 220 cm/s.

Velocity is a vector expression of the displacement that an object or particle undergoes with respect to time . The standard unit of velocity magnitude (also known as speed ) is the meter per second (m/s). Alternatively, the centimeter per second (cm/s) can be used to express velocity magnitude.

Learn more about velocity:

brainly.com/question/28738284

#SPJ4

The average force exerted by the person is 4.8 N (23 N / 4.8 s).

Force is an interaction between two or more objects that can cause a change in the motion, shape, or energy of one or both of the objects. Force can be classified into two categories: contact forces and non-contact forces. Examples of contact forces include friction, tension, and normal force. Examples of non-contact forces include gravity, magnetism, and electrostatic forces. Force is measured using the SI unit called the newton (N).

The force exerted by the person is equal to the mass of the box multiplied by the acceleration. Since the mass of the box is 10 kg and the acceleration is 2.3 m/s, the force exerted by the person is 23 N (10 kg × 2.3 m/s). This force was applied over a time of 4.8 s, so the average force exerted by the person is 4.8 N (23 N / 4.8 s).

To know more about force click-
https://brainly.com/question/12785175
#SPJ4

When Ts is the time required for P to make one revolution around the Sun relative to E and Tp, Te are the times required for the revolution of P and E around the Sun, the relation between them is 1/Ts = 1/Te - 1/ Tp.

Substitute θe = ωe Ts and θp = ωp Ts in the equation θe = θp + 2 π

ωe Ts = 2 π + ωp Ts ---(1)

Substitute ωp = 2 π/ Tp and ωe = 2 π/Te

Placing above equations in (1), we have,

(2 π/Te) Ts = 2 π + (2 π/ Tp) Ts

On re-arranging, we have,

2 π/Te - 2 π/ Tp = 2 π/Ts

Eliminating 2 π in all the terms, we get,

1/Te - 1/ Tp = 1/Ts

Thus, the relation 1/Ts = 1/Te - 1/ Tp is proved.

To know more about planets:

https://brainly.com/question/18846098

#SPJ4

"The correct statement is There are twice as many gas molecules in the liquid."

Henry's Law states that the partial pressure of a gas above a solution is precisely proportional to the mass of the gas that will dissolve into the solution.

Mathematically, C = kH × P

where, kH is Henry's constant

P = Partial pressure

Because the relationship between concentration and gas partial pressure is straightforward. Therefore, the number of molecules in the liquid will increase as partial pressure increases.

So, we can conclude that the statement there are twice as many gas molecules in the liquid, is true.

The given question is incomplete. The complete question contains options. They are 'a. The Henry’s Law constant is decreased by half. b. There are half as many gas molecules in the liquid. c. There is no change in the number of gas molecules in the liquid. d. The Henry’s Law constant is doubled. e. There are twice as many gas molecules in the liquid.'

To know more about gasses:

https://brainly.com/question/14778008

#SPJ4

A 60.0 kg skier is at the top of a slope 10.0 m above the ground. The gravitational potential energy of the skier-earth system is 5880J.

Given,

m=60 kg

h=10m

g=9.8

P.E=mgh

    =60*10*9.8

    =5880J

William Rankine, a Scottish engineer, and physicist from the nineteenth century coined the term potential energy. Potential energy is classified into several types, each of which is associated with a specific type of force.

Because of its position, an object, as we know, can store energy. When a bow and arrow are drawn, some energy is stored in the bow, which is responsible for the kinetic energy gained when the bow is released.

Similarly, when a spring is displaced from its equilibrium position, it gains energy, which we see as stress in our hands when we stretch it. Potential energy is a type of energy that is created as a result of an alteration.

Learn more about potential energy here:

https://brainly.com/question/11749818

#SPJ4

The membrane's time constant is 2.87 ms. The resistance and capacitance of RC circuits are used to calculate the time constant. The time constant's value is determined in milliseconds.

The time constant is calculated using the equation,

T = R*C in seconds.

In physics and engineering, the parameter that specifies how a first-order, linear time-invariant (LTI) system reacts to a step input is known as the time constant, which is typically symbolized by the Greek letter tau. The time constant is the main property of a first-order LTI system.

To know more about  time constant visit:

https://brainly.com/question/1597456

#SPJ4

If a person whirls an object horizontally in a counter-clockwise direction and the string breaks at point P, the rock will follow a path that is determined by the combination of its initial horizontal velocity and its vertical velocity due to gravity.

Without additional information about the object's initial velocity and the distance from the point of release to the ground, it is difficult to determine the exact path that the rock will follow. However, it is likely that the rock will follow a curved path, where gravity causes the rock to fall vertically downward while the horizontal velocity causes it to continue moving horizontally. This path is known as a parabolic path or a projectile motion.

Learn more about horizontally clockwise problems here

https://brainly.com/question/12013236

#SPJ4

Answer:

a

Explanation:

The acceleration of the cannon ball horizontally is 0 m/s2, since it is already traveling at a constant velocity.

Answer: I think it is (C.

Explanation: (C. is more realistic because that is something i would do.

Part A

The momentum of the ball right before the collision is given by the equation

$p_{before,y} = mv_{before,y}$

But we know the initial velocity of the ball before the collision is just the velocity due to gravity, which is given by

$v_{before,y} = gt_0$

where $t_0$ is the time taken for the ball to fall from the initial height to the table.

This is given by

$t_0 = \sqrt{\frac{2h_i}{g}}$

Substituting this into the equation for the momentum gives

$p_{before,y} = mg\sqrt{\frac{2h_i}{g}}$

The final answer is

$p_{before,y} = m\sqrt{2gh_i} \approx 88.5 \,\text{kg m/s}$

Part B

The momentum of the ball right after the collision is given by the equation

$p_{after,y} = mv_{after,y}$

But we know the final velocity of the ball after the collision is just the velocity due to gravity, which is given by

$v_{after,y} = gt_f$

where $t_f$ is the time taken for the ball to fall from the final height to the table.

This is given by

$t_f = \sqrt{\frac{2h_f}{g}}$

Substituting this into the equation for the momentum gives

$p_{after,y} = mg\sqrt{\frac{2h_f}{g}}$

The final answer is

$p_{after,y} = m\sqrt{2gh_f} \approx 73.6 \,\text{kg m/s}$

Part C

The impulse imparted to the ball during the collision is given by

$J_y = p_{after,y} - p_{before,y}$

Substituting the values from Parts A and B gives

$J_y = 73.6 \,\text{kg m/s} - 88.5 \,\text{kg m/s} \approx -14.9 \,\text{kg m/s}$

Part D

The average force exerted on the ball during the collision is given by

$F_{avg,y} = \frac{J_y}{t_c}$

Substituting the value from Part C gives

$F_{avg,y} = \frac{-14.9 \,\text{kg m/s}}{15 \,\text{ms}} \approx -0.99 \,\text{N}$

Part E

The change in kinetic energy of the ball during the collision is given by

$K_{after} - K_{before} = \frac{p_{after,y}^2 - p_{before,y}^2}{2m}$

Substituting the values from Parts A and B gives

$K_{after} - K_{before} = \frac{73.6^2 - 88.5^2}{2 \cdot 50} \approx -3.3 \,\text{J}$

What is kinetic energy?

Kinetic energy is the energy of a moving object, equal to the work done to accelerate the object from rest to its current velocity. It is dependent on the object's mass and velocity.

To learn more about kinetic energy

Here: https://brainly.com/question/8101588

#SPJ4

The time taken for the spider crawling at 630 ft/hr to travel through the 15 ft wide room is 42 hours

From the formula of speed, we can obtain a formula for calculating time as illustrated below:

Speed = Distance / time

Cross multiply

Speed × time = Distance

Divide both sides by speed

Time = Distance / speed

Using the above formula, we can obtain the time taken from the spider to travel through the room. Details as follow:

Time = Distance / speed

Time = 630 / 15

Time = 42 hours

From the calculation made above, we can conclude that the time taken is 42 hours

Learn more about time:

https://brainly.com/question/13257215

#SPJ1

The goose weighs 21.3 pounds and travels at an average speed of 8 miles per hour (miles per hour). The goose's kinetic energy in joules is 61.86 kg m2/sec2.

Given,

Kinetic energy (K.E)=1/2mv²

where m=mass in kg,velocity =v m/sec

From data m=21.3lb

but 21.3lb =454g;  1000g=1kg

21.3lb×454g/1lb×(kg/1000g)=9.6702 kg

velocity=8.00 miles/h

1mile=1.61km; 1hour=60min =60×60 sec

8.00miles/hour ×(1 hour/60×60sec)×(1.61 km/1mile)×1000m/1km

v=3.577 m/sec

Kinetic energy (K.E)=1/2mv²

                               =1/2(9.67)(3.577 m/sec)²

                               =61.86 kg m²/sec²

∴KE=61.86 Joule

kinetic energy of the goose=61.86J

Kinetic energy is the type of energy that an object or particle possesses as a result of its motion. When work is performed on an object by applying a net force, the object accelerates and gains kinetic energy. Kinetic energy is a property of a moving object or particle that is affected by both its motion and mass. Translation (or movement along a path from one location to another), rotation about an axis, vibration, or any combination of motions are all possible.

Learn more about Kinetic energy here:

https://brainly.com/question/999862

#SPJ4

100.00 °F to Celsius would be 37.78 °C

Answer: A

Explanation: This is a condition that makes it hard for the body to obsorve oxygen.

Answer:

it's A

Explanation:

i just did the same thing

The 27.9 kg mass experience a net force of zero. Gravitational equilibrium occurs when the gravitational force on an object is equal to zero.

Tilting an object will increase the height of its center of gravity when it is in a stable balance. When tilted, an item in unstable equilibrium will have a lower center of gravity. Finally, for objects in neutral equilibrium, the center of gravity will stay at the same height when pushed.

To find the distance at which the 27.9 kg mass experiences a net force of zero, we need to calculate the gravitational force acting on it due to the other two masses. The gravitational force between two masses m1 and m2 at distance r is given by F = Gm1m2/r^2, where G is the gravitational constant.

First, we know that the distance between the 99 kg and 404 kg masses is fixed. Let's call this distance d.

Now we can set the gravitational force acting on the 27.9 kg mass due to the 99 kg mass and the 404 kg mass equal to zero and solve for r:

0 = G*(27.9 kg)(99 kg)/r^2 + G(27.9 kg)*(404 kg)/(d-r)^2

Solving for r, we get:

r = d * sqrt(404/(404+99))

Substituting d value will give the distance at which the 27.9 kg mass experiences a net force of zero in units of m.

To know more about gravitational force visit:

brainly.com/question/3009841

#SPJ4

Answer:

27,500 N

Explanation:

W = Fd

F = W/d = (2.2x10⁵J)/(8 m ) = 27,500 N

According to Newton's third rule of motion, whenever a first object applies a force to a second object, the first object feels a force that is both equal to and opposite from the force that it applies.

What is Force?

In physics, a force is an influence that can change the motion of an object. A force can cause a mass object's velocity or acceleration to change. Force can be described intuitively as a push or a pull. Because it has both magnitude and direction, a force is a vector quantity.

To find the work done by friction over the full length of the roller coaster, you will need to calculate the force of friction acting on the marble over the entire track. The force of friction can be calculated using the formula: F = μ * N, where μ is the coefficient of kinetic friction and N is the normal force. Once you have calculated the force of friction, you can then calculate the work done by multiplying the force of friction by the distance travelled. The formula for work is W = F * d, where F is the force of friction and d is the distance travelled.

To Learn more About the force Refer To:

brainly.com/question/12785175

#SPJ1

A thermometer which always reads three degrees lower than the actual temperature is reliable but it is not valid. Thus, the correct option is E.

A thermometer is generally made up of a small, hollow glass tube. At the bottom of this tube is present a bulb, which holds a liquid such as the alcohol or mercury element. When there is an increase in the heat, the liquid present inside the bulb expands, pushing up into the tube of the thermometer. On the other hand, a decrease in heat lets the liquid contract, moving down the tube of the thermometer.

A thermometer works on the principle which states that solids and liquids tend to expand with temperature. This changes in mercury is studied on a temperature scale.

A thermometer which always reads three degrees lower than the actual temperature can be reliable but it is not valid at all.

Therefore, the correct option is E.

Learn more about Thermometer here:

https://brainly.com/question/24189042

#SPJ1

Your question is incomplete, most probably the complete question is:

What would be true of a thermometer that always reads three degrees lower than the actual temperature?

a. It is valid but not reliable

b. It is both reliable and valid

c. It is neither reliable nor valid

d. It is not valid, but you cannot determine if it is reliable from the information given

e. It is reliable but not valid

This strategy is preferable since you need to apply force because of water balloon does indeed have a lot of motion. To bring its balloon to rest, you must apply a force over a period of time.

The physics term for a body's position nor orientation changing over time. Translation is defined as movement along this line or a curve. Rotation is a motion that modifies a body's orientation.

To let the balloon to settle after some time, according to Δp = fΔtΔp→F→Δt

In contrast to if the balloon just smacked against a hand that was immobile, you may bring the inflatable to rest by moving your hand as the balloon does. You may place the balloon on top of something bigger. The force could be less. The effort can be reduced while still causing its same acceleration change and preventing the balloon from breaking.

To know more about Motion visit:

https://brainly.com/question/26083484

#SPJ4

The force constant of the spring is 30.6N and the unloaded length of the spring is 0.57m.

The force constant (k) of the spring is calculated by the equation

k = (mass× gravity) / (change in length).

In this question, the mass is the difference between the two masses (2.10 kg - 0.300 kg = 1.800 kg),

And the change in length is the difference between the two lengths (0.750 m - 0.180 m = 0.570 m).

Therefore, the force constant of the spring is

(1.800 kg × 9.8 m/s²) / (0.570 m) = 30.6 N/m.

The unloaded length of the spring is determined by subtracting the length of the spring when the 0.300 kg mass hangs from it (0.180 m) from the length of the spring when the 2.10 kg mass hangs from it (0.750 m). Therefore, the unloaded length of the spring is

0.750 m - 0.180 m = 0.570 m.

Learn more about spring:

https://brainly.com/question/26838571

#SPJ4

The number of the square tiles that would be needed to tile the entire room is 2,800 tiles.

The area of the room is calculated by applying the following formula as shown below.

Mathematically, the formula for area of a rectangular room is given as;

A = L x B

where;

Area = 350 m x 200 m

Area = 70,000 m²

The area of the square tiles is calculated as follows;

A = L x L

where;

A = 5 m x 5 m

A = 25 m²

The number of the square tiles that would be needed to tile the entire room is calculated as follows;

n = area of the entire room / area of each square tile

n = ( 70,000 m² ) / ( 25 m² )

n = 2,800

Learn more about area of square here: https://brainly.com/question/813881

#SPJ1