Body systems work together to maintain the entire organism then the body response to the running mile is then the breathing may become heavy as well as pulse quicken as heart pump harder
According to the given data body temprature from starting it is 98.6°F (37°C) and the ending data is 99.1°F (38°C) and pulse and heart rate is from starting 80 bpm and ending it is 120 bpm and respiration rate is from starting 18 bpm and the ending it is 28 bpm and sweating in starting is normal and in the ending it is increase and skin temprature in starting is 91°F (33°C) and ending is 92.5°F (35°C) so when the student start to run the heat or temprature in the body is normal but when the student run a mile the temprature as well as pulse and heart rate and respiration rate is also increases
Know more about body
https://brainly.com/question/1334389
#SPJ9
The electron configuration of an element is shown below.
1s22s22p5
Name the group this element belongs to in the periodic table and explain your answer.
Based on the electron configuration, explain how many electrons it is likely to receive from the atom of another element during the formation of a bond.
If our eyes could see a slightly wider region of the electromagnetic spectrum, we would see a fifth line in the Balmer series emission spectrum. Calculate the wavelength λ
λ
associated with the fifth line.
Wavelength will be 397 nm.
Balmer series lines are transitions from n > 2 to m = 2
The fifth line is from n = 7 to m = 2
1/λ = R(1/m2 - 1/n2)
= 1.097 x 107 x (1/22 - 1/72)
= 2.519 x 10-6
λ = 1/2.519 x 10-6
= 3.97 x 10-7 m
= 397 nm
The electromagnetic spectrum is the variety of frequencies of electromagnetic radiation and their respective wavelengths and photon energies.
Electromagnetic strength travels in waves and spans a huge spectrum from very long radio waves to very quick gamma rays. The human eye can only detect a small portion of this spectrum and this sprctrum is called visible light. A radio detects a exclusive part of the spectrum, and an x-ray system makes use of but some other portion.
Generally electromagnetic radiation is classed by way of wavelength into:
* Radio wave, * Ultraviolet rays
* Microwave, * X-rays
* Infrared rays * Gamma rays.
* Visible light,
Learn more about Electromagnetic spectrum here:-https://brainly.com/question/23423065
#SPJ1
Besides nylon, what other product is formed from the reaction of adipoyl chloride and 1,6-diaminohexane?.
Besides nylon, HCl is formed from the reaction of adipoyl chloride and 1,6- diaminohexane , but HCl is the byproduct molecule.
What is formed when adipoyl chloride and 1,6-diaminohexane reacts with each other and what are the by products?Adipoyl chloride is the monomer and hexamethylinediamine is also the monomer which reacts together to form polymer.
The polymer formed is named nylon6,6 which is a co polymer and nylon 6,6 find its use in various other activities of life.
Nylon6,6 is a copolymer since the participation of two monomers , and not a single monomer undergoing decomposition.
Nylon6,6 is formed with an elimination of small molecule of HCl which is considered to be a by product .
It is formed by a condensation reaction and hence HCl is the product formed from the reaction of adipoyl chloride and 1,6- diaminohexane.
To know more about nylon visit:
brainly.com/question/10278626
#SPJ4
A student is investigating thermal energy transfer. The student places two copper blocks, Block 1 at 40°C and the Block 2 at 20°C, next to each other so they make contact. They are allowed to sit in an isolated system until energy transfer has completed. Which picture shows the final temperatures of the blocks?
Answer:
Explanation:
tt
2. How many hydrogen bonds can form between a single ether molecule and water molecules? Draw the structures to explain.
Ether can only form one hydrogen bond per molecule.
What is hydrogen bonding?We know that the hydrogen bond is the kind of bond that occurs when the dipole of water interacts with the dipole that is on another molecule. We can see this in a lot of hydrides of electronegative elements.
We can see that ether has only one electronegative atom and that is oxygen from the image that is shown in the answer. This oxygen atom can interact with the positive end of the dipole in only one water molecule at a time.
Learn more about hydrogen bonding:https://brainly.com/question/15099999
#SPJ1
.
Complete the equation for cellular respiration:
________ + sugar → ________ + water
oxygen, carbon dioxide
carbon dioxide, oxygen
ATP, light energy
chlorophyll, mitochondria
The equation for cellular respiration is in the given choices is option A. oxygen + sugar → carbon dioxide + water
Cellular respiratory is a chain of chemical reactions that smash down glucose to produce ATP, which may be used as power to energy many reactions throughout the body. There are 3 predominant steps of mobile respiratory: glycolysis, the citric acid cycle, and oxidative phosphorylation.
Cellular respiration is the process by the way which organic fuels are oxidized in the presence of an inorganic electron acceptor along with oxygen to provide massive quantities of power, to power the bulk manufacturing of ATP.
Learn more about cellular respiration here:-https://brainly.com/question/12311315
#SPJ1
How many moles of O2 were produced in a decomposition reaction of H2O2 if the pressure was 0.978 atm, the temperature was 27C and the volume of O2 gas collected was 0.082L
The number of mole of O₂ produced from the decomposition of H₂O₂ is 0.0033 mole
How to determine the number of mole of O₂ producedWe'll begin by obtaining the mole of H₂O₂ that decomposed. This is obatined as follow:
Pressure (P) = 0.978 atmTemperature (T) = 27 °C = 27 + 273 = 300 KVolume (V) = 0.082 LGas constant (R) = 0.0821 atm.L/Kmol Mole of H₂O₂ (n) =?PV = nRT
Divide both sides by RT
n = PV / RT
n = (0.978 × 0.082) / (0.0821 × 300)
n = 0.0033 mole
Finally, we shall determine the number of mole of O₂ produced. This is illustrated below
H₂O₂ -> H₂ + O₂
From the balanced equation above,
1 mole of H₂O₂ decomposed to produce 1 moles of O₂
Therefore,
0.0033 mole of H₂O₂ will also decompose to produce = 0.0033 mole of O₂
Thus, number of mole of O₂ produced from the reaction is 0.0033 mole
Learn more about number of mole:
https://brainly.com/question/13375719
#SPJ1
What is the mass of 4.23 × 10^24 molecules of oxygen?
Taking into account the definition of Avogadro's Number and molar mass, the mass of 4.23×10²⁴ molecules of oxygen is 112.37 grams.
Definition of Avogadro's Number
Avogadro's Number is called the number of particles that make up a substance (usually atoms or molecules). This can be found in the amount of one mole of said substance and its value is 6.023×10²³ particles per mole.
Avogadro's number applies to any substance.
Definition of molar massThe molar mass of substance is a property defined as its mass per unit quantity of substance, in other words, molar mass is the amount of mass that a substance contains in one mole.
Mass of 4.23×10²⁴ molecules of oxygenYou can apply the following rule of three: if 6.023×10²³ molecules are contained in 1 mole of oxygen, then 4.23×10²⁴ molecules are contained in how many moles of oxygen?
amount of moles of oxygen= (4.23×10²⁴ molecules × 1 mole)÷ 6.023×10²³ atoms
amount of moles of oxygen= 7.023 moles
7.023 moles of oxygen are 4.23×10²⁴ molecules of oxygen.
Being 16 g/mole the molar mass of oxygen, the mass of oxygen in 7.023 moles is calculated as:
mass of oxygen= 7.023 moles×16 g/mole
mass of oxygen= 112.37 grams
Finally, a mass of 112.37 grams are present in 4.23×10²⁴ molecules of oxygen.
Learn more about Avogadro's Number and molar mass:
brainly.com/question/11907018
brainly.com/question/1445383
brainly.com/question/5216907
brainly.com/question/11209783
#SPJ1
Decide whether each statement is supported by each scientist's atomic model.
Dalton's
atomic
model
Thomson's
atomic
model
Rutherford's
atomic
model
Atoms are the smallest Atoms contain negative An atom contains a
particles.
particles.
nucleus.
Select...
Select...
Select...
>
→
Select...
Select...
Select.
>
Select...
Select...
Select.
Atoms cannot be created or destroyed.
Atoms cannot be broken down into smaller pieces.
All atoms of an element are identical.
Chemical reactions cause atoms to be rearranged.
Electrons have a negative charge. Atoms usually contain an equal number of positively charged protons and negatively charged electrons. Protons and neutrons make up the atomic nucleus or nucleus, and small electrons cloud the nucleus. Protons and neutrons can be further broken down and both are made up of so-called quarks.
Atoms consist of a central nucleus surrounded by one or more negatively charged electrons. The nucleus is positively charged and contains one or more relatively heavy particles known as protons and neutrons. Atoms are the basic building blocks of matter. As far as we know, quarks cannot be broken down into smaller components making them the smallest we know of.
Learn more about Atoms here:-https://brainly.com/question/6258301
#SPJ1
Calculate the relative molecular mass of CuSo4
Mass of Cu = 63.5
Mass of S = 32
Mass of O = 4
Total molecular mass = 63.5 + 32 + 16 × 4 = 159.5 amu
The small, but important, energy differences between 3s, 3p, and 3d orbitals are due mainly to.
The small, but important, energy differences between 3s, 3p, and 3d orbitals are due mainly to Heisenberg uncertainty principle.
A small but important difference between 3s, 3p, and 3d are due mainly to the Heisenberg uncertainty principle. Their principal quantum number ones rule and the number of weapons that can hold the penetration effect.
An electron in the 3s orbital is more likely to be close to the nucleus than is an electron in the 3p orbital; an electron in the 3p orbital, in turn, has a greater probability of being close to the nucleus than does one in the 3d orbital.
Therefore, degenerate orbitals are those orbitals that have the same energy. As given in the above representation, 2s and 2p orbitals are degenerate; 3s, 3p and 3d orbitals are degenerate, and so on. The degeneracy of the orbitals breaks down in the case of multi-electron systems.
Learn more about Heisenberg uncertainty principle here:- https://brainly.com/question/16941142
#SPJ4
What’s an equation showing the beta decay of the Hydrogen-3
Answer:
Explanation:
Thus, negative beta decay results in a daughter nucleus, the proton number (atomic number) of which is one more than its parent but the mass number (total number of neutrons and protons) of which is the same. For example, hydrogen-3 (atomic number 1, mass number 3) decays to helium-3 (atomic number 2, mass number 3)
When 0.1 mol of PCls (g) is heated at 78.5 °C in a 1.00 L container, the pressure at
equilibrium is 3.50 x 105 Nm2. Calculate the degree of dissociation of PCIs.
Based on the pressure of the gas in the 1.00 L container, the percentage dissociation of PCl₅ is 60%.
What is the equation of the dissociation of PCl₅?The equation of the dissociation of PCl₅ when heated is given below:
PCl₅ (s) ---> PCl₃ (g) + Cl₂ (g)
Based on the equation of the dissociation of PCl₅, 1 mole of PCl₅ decomposes to give 1 mole of PCl₃ gas and 1 mole of Cl₂ gas.
Hence, 1 mole of PCl₅ dissociates to give 2 moles of gas.
0.1 mole of PCl₅ will dissociate to give 0.1 * 2 moles of gas = 0.2 moles of gas.
At STP, the pressure of 0.2 moles of gas is calculated as follows:
PV = nRT
where;
P is pressure = ?V is volume = 1.00 Ln is the number of moles = 0.2R is molar gas constant = 0.082 L.atm/k.molT is temperature = (273 + 78.5) KP = nRT / V
P = 0.2 * 0.082 * 351.5/ 1
P = 5.76 atm or 5.84 * 10⁵ N/m²
Percentage dissociation of PCl₅ = (3.50 * 10⁵/5.84 * 10⁵) * 100%
Percentage dissociation of PCl₅ = 60%
Learn more about the pressure of a gas at: https://brainly.com/question/16686077
#SPJ1
How many joules of energy will be saved by using LED bulb rated at 7.4 watts instead
of a 60 watts incandescent bulb over a 6.5 hour period?
Hint: find the energy use for each of them, then find the difference)
1 kilowatt-hour (kWh) = 3.6 x 106 joules (J)
The energy saved by using an LED bulb is equal to 1.23 ×10⁶ J.
What is power?Power can be described as the amount of energy transferred or converted per unit of time. The S.I. unit of power is one joule per second (J/s) or Watt (W).
Power can be described as a time-based quantity and the rate at which work should be done upon an object. The formula for power can be represented as mentioned below.
Power = Work/time
P = W/t
Given, the power of the first bulb, P = 7.4 W
The bulb gives energy for a time, t = 6.5 hours
Work or energy of the first bulb = 7.4 × 6.5 = 48.1 W.h
Given the power of the second bulb, P = 60 W
The bulb gives energy for a time, t = 6.5 hours
Work or energy of the second bulb = 60 × 6.5 0 = 390 W.h
The difference in the energy = 390 - 48.1 = 341.9 Wh
The energy difference in (Joules) = 341.9 × 3600 = 1.23 ×10⁶ J
Learn more about power, here:
brainly.com/question/14070854
#SPJ2
Hi can someone please help me on 3 and 4 i need help don’t understand a clue lol! thank youuuuu
3. The set of n=6, l=1, [tex]m_{l}[/tex]= +1, [tex]m_{s}[/tex]= +1/2 is valid.
4. The set of n=1, l=1, [tex]m_{l}[/tex]= 0, [tex]m_{s}[/tex]= -1/2 is invalid. The right set is n=1, l=0, [tex]m_{l}[/tex] = 0, [tex]m_{s}[/tex] = +1/2, -1/2
What is quantum number?To define where an electron is located in an associated atom, we utilize a set of precise integers known as quantum numbers. The characteristics of the atomic orbitals and the electrons within them are described by quantum numbers. Four quantum numbers are used to characterize the state of an electron in an atom or ion. Consider them as significant elements in an equation that explains the three-dimensional location of electrons in a specific atom.
Here,
n is principal quantum number,
l is Angular Momentum Quantum Number,
[tex]m_{l}[/tex] is Magnetic Quantum Number,
[tex]m_{s}[/tex] is Spin Quantum Number
to know more about quantum number, visit:
https://brainly.com/question/16977590
#SPJ13
Express 0.000 000 000 936 in scientific notation.
[?]×10 [?]
Answer: 9.36 × 10^-10
Explanation:
Answer: 9,36 x 10^-12
Explanation:
the a has to be in the range of 0 - 10
to get to 0.000 000 000 936 you have to divide 9,36 by 10, 12 times. As the expression goes.
Hope this was alright :)
the atomic mass of sulfur is 32.06u. how many atoms are present in exactly 2 mol of sulfur
The number of atoms in 2 moles of the sulfur is 1.204 * 10^24 atoms
How many moles are present?We know that atoms are contained in an element. The number of atoms that are contained in one mole of a substance is given by the Avogadro's number.
Now we know that one mole of sulfur is going to contain 32.06 g of sulfur. This is because this is the mass of one mole of the sulfur atoms that are present. 2 moles of sulfur would contain 64.12 g
Given this fact we can now say that;
32.06 g of sulfur contains 6.02 * 10^23 atoms'
64.12 g of sulfur will contain 64.12 g * 6.02 * 10^23/ 32.06 g
= 1.204 * 10^24 atoms
Learn more about atoms:https://brainly.com/question/1566330
#SPJ1
What is the final volume (in mL) of a solution if you have 17.5 g of NH4NO3 and want a concentration of 1.75 M?
The final volume is 30.62L
Volume is the amount of space occupied by a three-dimensional figure as measured in cubic units
Here given data is
NH₄NO₃ = 17.5 g
Concentration = 1.75 M
We have to calculate final volume solution = ?
So Concentration = mass/volume
Volume = concentration × mass
Volume = 1.75 M × 17.5 g
Volume = 30.62L
Know more about volume
https://brainly.com/question/25214397
#SPJ9
Which physical property allows iron to be easily separated from most other materials
The physical property that allows iron to be easily separated from most other materials is magnetism.
Metals that naturally attract magnets are known as ferromagnetic metals. These magnets tend to firmly stick to these metals. For example when you rub a piece of iron along a magnet the north seeking poles of the atoms get lined up in one direction. This causes a force to build up a force and this force creates a magnetic field. This is how a piece of iron becomes a magnet.
To explain the magnetism of iron we can take example iron present in sand, it was seen that the iron filings are attracted to the magnet and the sand is not. This allowed us to separate the iron filings from the sand.
To know more about magnetism
https://brainly.com/question/13026686
#SPJ1
Scientists have changed the model of the atom as they have gathered new evidence. One of the atomic models is shown below.
A large black cross in a purple circle with a black line around the purple, with 10 small green balls dispersed within the purple circle.
What experimental evidence led to the development of this atomic model
The experimental evidence that led to the development of this atomic model is that atom is divisible and having subatomic particles such as proton, electron and neutron.
What are experimental evidence?Experimental evidence is said to be comprised of observations generated under controlled conditions rather than through other empirical research methods. The experimental evidence makes it possible for scientist to draw causal inferences about a phenomenon under study.
From the gold foil experiment, some of the positive particles aimed at a gold foil seemed to bounce back which gives information to the scientists that some heavy particles present in the center of the atom which bounce back the positive particles.
Learn more about experimental evidence at: https://brainly.com/question/13774487
#SPJ1
a. 25.0ml of a solution of sodium hydroxide solution required 21.50ml of 0.100 mol sulphuric acid for neutralisation.
Find the concentration of the sodium hydroxide solution in mol/.
H₂SO₄aq+2 NaOH{aq}-----> Na₂SO₄{aq}+2 H₂O{l}
b. Find the volume of 1.2 mol/I hydrochloric acid that reacts with 25.00 cm³ of 1.50 mol /dm³ sodium hydroxide.
HCl{aq}+NaOH{aq} ------>NaCl{aq}+H₂O{l})
c. What volume of 0.040 mol/I calcium hydroxide just neutralises 25.0 ml of 0.100 mol/I nitric acid?
Ca(OH)₂(aq)+2 HNO₃{aq}------> Ca(NO3)₂{aq}+2 H₂O{l}
A. The concentration of the sodium hydroxide solution is 0.172 mol/L
B. The volume of hydrochloric acid that reacts is 31.25 cm³
C. The volume of calcium hydroxide solution is 31.25 mL
A. How do I determine the concentration of sodium hydroxide?
The concentration of sodium hydroxide solution can be obtained by doing the following:
H₂SO₄ + 2NaOH -> Na₂SO₄ + 2H₂O
From the balanced equation above, the following were obtained:
The mole ratio of the acid, H₂SO₄ (nA) = 1The mole ratio of the base, NaOH (nB) = 2From the question, we obtained:
Volume of base, NaOH (Vb) = 25 mLVolume of acid, H₂SO₄ (Va) = 21.5 mL Concentration of acid, H₂SO₄ (Ca) = 0.1 mol/L Concentration of base, NaOH (Cb) =?CaVa / CbVb = nA / nB
(0.1 × 21.5) / (Cb × 25) = 1/2
2.15 / (Cb × 25) = 1/2
Cross multiply
Cb × 25 = 2.15 × 2
Cb × 25 = 4.3
Divide both side by 25
Cb = 4.3 / 25
Cb = 0.172 mol/L
Thus, the concentration of the sodium hydroxide, NaOH solution is 0.172 mol/L
B. How do I determine the volume of the hydrochloric acid?
The volume of the hydrochloric acid can be obtained as follow:
HCl + NaOH -> NaCl + H₂O
From the balanced equation above, the following were obtained:
The mole ratio of the acid, H₂SO₄ (nA) = 1The mole ratio of the base, NaOH (nB) = 1From the question given, we obtained the following:
Concentration of acid, HCl (Ca) = 1.2 mol/LVolume of base, NaOH (Vb) = 25.00 cm³Concentration of base, NaOH (Cb) = 1.50 mol /dm³ = 1.50 mol /LVolume of acid, HCl (Va) =?CaVa / CbVb = nA / nB
(1.2 × Va) / (1.5 × 25) = 1
(1.2 × Va) / 37.5 = 1
Cross multiply
1.2 × Va = 37.5
Divide both side by 1.2
Va = 37.5 / 1.2
Va = 31.25 cm³
Thus, the volume of the hydrochloric acid is 31.25 cm³
C. How do I determine the volume of the calcium hydroxide?
The volume of the calcium hydroxide solution can be obtained as follow:
Ca(OH)₂ + 2HNO₃ -> Ca(NO3)₂ + 2H₂O
The mole of the acid, HNO₃ (nA) = 2The mole of the base, Ca(OH)₂ (nB) = 1Concentration of base, Ca(OH)₂ (Cb) = 0.04 mol/LVolume of acid, HNO₃ (Va) = 25 mL Concentration of acid, HNO₃ (Ca) = 0.1 mol/LVolume of base, Ca(OH)₂ (Vb) =?CaVa / CbVb = nA / nB
(0.1 × 25) / (0.04 × Vb) = 2
2.5 / (0.04 × Vb) = 2
Cross multiply
2 × 0.04 × Vb = 2.5
0.08 × Vb = 2.5
Divide both side by 0.08
Vb = 2.5 / 0.08
Vb = 31.25 mL
Thus, the volume of the calcium hydroxide, Ca(OH)₂ is 31.25 mL
Learn more about volume:
https://brainly.com/question/19053582
#SPJ1
Silver ion can be used to gravimetrically analyze Br- ion. Calculate the gravimetric factor for Br- using silver bromide. Please show how to do so as well.
The gravimetric factor for Br- using silver bromide is 0.425.
What is the gravimetric factor?The gravimetric factor is an expression that is used to convert grams of a compound into grams of a single element.
It is expressed as a ratio of the formula weight (FW) of the substance that is being determined to that of a second substance that is weighed.
Gravimetric factor = formula mass of substance weight / formula mass of substance soughtFor example formula of silver bromide is AgBr and the formula mass of silver bromide is 188 g/mol
Formula mass of bromide ion = 80 g/mol
Gravimetric factor = 80/1188
Gravimetric factor = 0.425
Learn more about gravimetric factor at: https://brainly.com/question/2094735
#SPJ1
40 POINTS TO FIRST PERSON WITH AN ANSWER! PLEASE HURRY!
PHYSICAL CHANGE:
A change that does not involve the formation of new substances.
-------------------------------------------------------------------------------------------------------------
Physical changes are not represented by equations because they do not involve the rearrangement of atoms. Since no new substances are formed, this means that the atoms of the substance are not broken, changed, or rearranged. Unlike chemical changes, physical changes involve a change in the state of matter. For example, the crushing of a soda can. The physical appearance of the object itself changed, but no new substances were created and there weren't any changes to that object's molecular structure, therefore, those changes cannot be represented by equations.
Hope that helps and good luck!
if the dissolution of borax in water is spontaneous, is the change in enthalpy positive or negative - or are both signs possible?
Specific heat capacity of a substance is the amount of heat required to raise the temperature by one degree Celsius of one gram of a substance. Therefore, the change in enthalpy will be negative.
What is Enthalpy?Enthalpy term is basically used in thermodynamics to show the overall energy that a matter have. Mathematically, Enthalpy is directly proportional to specific heat capacity of a substances.
Mathematically,
Enthalpy=mass of solution× specific heat capacity of solution ×Change in temperature.
Any reaction which is spontaneous, then the enthalpy related to this type of reaction is always negative that is reaction is always exothermic.
Therefore, the change in enthalpy will be negative.
To know more about enthalpy, here:
https://brainly.com/question/24170335
#SPJ1
In the image above you see an 8mL graduated cylinder or
the left and an excerpt of a burette on the right. Each
holds a fixed volume of liquid. What are the volume
readings in each of these pieces of glassware? Give your
readings to 2 decimal places.
The volume in the graduated cylinder is
mL
The volume in the burette is
mL.
Answer: graduated cylinder: 4.25
Explanation:
The following is a DNA nucleotide sequence. Write the sequence of nucleotides that would pair up with this sequence: GCA TCT CCC CGA
Answer: CGT AGA GGG GCT
Explanation:
Cytosine adds up with the G (forgot the name of it) and A connects with the G.
Please and thank you
Answer:
A
Explanation:
HELP ASAP URGENT WILL GIVE BRAINIEST (CORRECT ANSWERS ONLY!!!!!) What mass of H2 forms when 32.25g Al reacts with excess hydrochloric acid? 2AI +6HCI > 2AIC3+3H2
AI: 26.98 g/mol
H2: 2.02 g/mol
[?]g H2
Answer: The correct answer (based on the ratio provided) is the mass of H₂ produced equals 3.51 g of H₂
Explanation:
The equation of the reaction:
2AI + 6HCI → 2AICI₃ + 3H₂
Based on the equation 2 * 27g of Al will produce 3 * 2g of H₂
As a result, 32.25g of Al will produce: 6/55 * 32.25g of H₂
The mass of H₂ produced is therefore 3.51g of H₂
Please remember to vote this as Brainliest if I earned it!
Which statement is true about synthesis reactions?
O They must have one or more reactants.
O They must have more than one product.
They must have two or more reactants
They must have two or more products.
A synthesis reaction has to do with one that they must have two or more reactants.
What is a synthesis reaction?In a synthesis reaction we would have the combination of two or more reactants but we are going to have a single product. The reactants that we have would somehow just combine and give us the product that we are looking for.
Thus, the idea of the synthesis reaction is that there would be a joining of the reactants. This already means that we must have more than one of the reactants so that we can have the species that would be joined in the reaction.
Learn more about synthesis reaction:https://brainly.com/question/16987748
#SPJ1
A student that is sheltering in place during the COVID-19 pandemic, was told to test three
different colors of markers. The student placed three different colors on a sheet of
chromatography paper, as shown in the diagram. The student also tested a different color of
marker, labeled the “unknown” to determine if the color marker was made from other colors.
The student prepares the experimental setup by using chromatography paper (a polar material)
and putting the paper in a nonpolar solvent. The results of the experiment (the “developed
chromatograms” are shown on the right.
(1) Which color of marker is the least polar? Justify your answers in terms of the IMF
interactions between the color dyes and the solvent or between the color dyes and the
paper.
(2) Which dye(s) is/are present in the unknown sample? Justify your answer.
(3) What was the most likely color of marker that the student tested?
The color of marker that is the least polar is the red dye because it shows the least interaction with the polar chromatography paper and the most interaction with the non-polar solvent.
The dyes that are most likely in the unknown sample are the blue and yellow dyes because the two spots produced by the unknown sample traveled almost the same distance as the blue and yellow dyes.
The most likely color of marker that the student tested is yellow.
What is chromatography?Chromatography is a separation technique used to separate colored substances by means of their interactions with mobile solvent phase and a non-mobile solid phase.
The dye that has the most interaction with the solvent phase will travel farther in the chromatographic column whereas the dye that has the least interaction with the solvent will travel the least distance.
Learn more about chromatography at: https://brainly.com/question/1394204
#SPJ1
