1.1.3 Quiz: Induction: The Search for Rules and Patterns
Question 1 of 10
Which of the following is most likely the next step in the series?
D
OA.
OB.
О с.
O D.
O

Answer:

1.3/4

2.2/3/4 or 1/6

3.4/2/3 or 2/3

Discrete-data is a category of quantitative information that has countable or finite values.

This indicates that there are no intermediate values between the precise numerical values that can be used to convey the data; only those values can be used. The number of siblings a person has, the number of pets a home has, and the number of individuals in a room are all examples of discrete data.

Numerous statistical methods, such as measures of central tendency like the mean, median, and mode, as well as measures of dispersion like range and standard deviation, can be used to analyse discrete data. Additionally, discrete data can be displayed graphically using tools like bar charts and frequency histograms.

A discrete data set is the number of stories in a skyscraper in Manhattan. A continuous data set, on the other hand, can be divided into ever-smaller pieces and can take on any value within a range. Therefore (b), "A discrete data set because the possible values can be counted."

To know more about Discrete-data visit:

https://brainly.com/question/13421250

#SPJ4

the length of the common tangent between the two circles is [tex](sqrt(37)/2)r.[/tex]

What is Pythagoras theorem?

The hypotenuse's square is equal to the sum of the squares of the other two sides if a triangle has a straight angle (90 degrees), according to the Pythagoras theorem. Keep in mind that BC2 = AB2 + AC2 in the triangle ABC signifies this. Base AB, height AC, and hypotenuse BC are all used in this equation. The longest side of a right-angled triangle is its hypotenuse, it should be emphasized.

The sum of the radii of the two circles is 4r. We can draw a right triangle with legs of length d/2 and (4r - r) = 3r, and with a hypotenuse equal to the length of the common tangent.

Using the Pythagorean theorem, we can find the length of the hypotenuse:

[tex]h^2 = (d/2)^2 + (3r)^2h^2 = (d^2)/4 + 9r^2[/tex]

Multiplying both sides by 4:

[tex]4h^2 = d^2 + 36r^2[/tex]

Since d = r, we can substitute:

[tex]4h^2 = r^2 + 36r^24h^2 = 37r^2[/tex]

Dividing both sides by 4:

h^2 = (37/4)r^2

Taking the square root of both sides:

[tex]h = (sqrt(37)/2)r[/tex]

Therefore, the length of the common tangent between the two circles is [tex](sqrt(37)/2)r.[/tex]

Learn more about Pythagoras theorem, by the following link

https://brainly.com/question/231802

#SPJ4

The degree of freedom is 3

A frequency table is a statistical utility that displays the spread of data by including each observed datum alongside its recurrence, expressing how often that value occurs in the given set.

To put it another way, it orders information by binding similar values and recording their respective appearances. Frequency tables are very beneficial for determining designs, trends, and exceptions within collections of data, as well as streamlining hefty quantities of information to enhance further scrutiny, such as computing possibilities or executing hypothesis examinations.

They can be conveyed through a tabular format or illustrated with histograms, bar graphs, or pies.

The frequency table is given below:

Interval              Observed frequency           Expected frequency

0-24                             33                                        25

25-49                           16                                         25

50-74                            23                                        25

75-99                            28                                       25

The value of [tex]x^2[/tex] is 3.62

Read more about frequency table here:

https://brainly.com/question/27820465

#SPJ1

The required actual length and width of the pool is 70 feet and 35 feet respectively, and the cost of the pool is $735.

Part A:

Using the scale of 2 inches equals 7 feet, we can set up the following proportions to find the actual dimensions of the pool:

2x = 70

x = 35

For the second part, we can use the same scale to find the actual

2x = 140

x = 70

Part B:

To find the area of the pool, we can multiply the length and width:

Area = 35 feet x 70 feet = 2,450 square feet

Cost = 2,450 square feet x $0.30 per square foot = $735

Therefore, it would cost $735 to buy a cover for the pool that costs $0.30 per square foot.

Learn more about the area of a rectangle here:

https://brainly.com/question/20693059

#SPJ1

Franco can read approximately 1.875 chapters of his history book in 1 hour, assuming his reading rate remains constant.

Franco read 3/8 of a chapter in 1/5 of an hour. To find out how many chapters he can read in 1 hour, we need to first determine his rate of reading.

To do this, we can set up a proportion:

3/8 of a chapter = x chapters
1/5 of an hour = 1 hour

Cross-multiplying, we get:

3/8 * 1 hour = x * 1/5

Simplifying:

3/8 = x/5

Cross-multiplying again:

15/8 = x

So Franco can read 15/8 or 1 7/8 chapters in 1 hour.

To know more about proportion Visit:

https://brainly.com/question/30657439

#SPJ11

In this case, option (F) is the correct choice, because there are at least 10 expected "successes" and 10 expected "failures" in the sample, which satisfies the requirement for constructing a confidence interval for a proportion.

The question provides information about a survey conducted by a polling company to measure political opinions.

The survey asked a random sample of 361 adults whether they think things in the country are going in the right direction or the wrong direction, and 47% responded that things were going in the wrong direction.

The question is asking whether the assumptions and conditions required to apply a confidence interval are met.

To apply a confidence interval, we assume that the sample is a simple random sample from the population of interest, and that the sample size is sufficiently large.

Moreover, for constructing a confidence interval for a proportion, we also require that there are at least 10 expected "successes" and 10 expected "failures" in the sample.

Option (B) is incorrect because a simple random sample is one of the assumptions required to apply a confidence interval, and the question states that the sample is a random sample.

Option (C) is incorrect because the sample size is large enough for constructing a confidence interval.

Option (D) and option (E) are incorrect because they do not accurately reflect the conditions required to apply a confidence interval for a proportion.

Option (A) and option (G) are not correct choices because they do not accurately address the assumptions and conditions required to apply a confidence interval for a proportion.

Therefore, the correct answer is (F), i.e., the assumptions and conditions required to apply a confidence interval are met, including the requirement of having at least 10 expected "successes" and 10 expected "failures".

For similar question on confidence interval.

https://brainly.com/question/30536583

#SPJ11

To find the critical value of z for each hypothesis test in Excel, we can use the NORMSINV function.

For a two-tailed test at a 7% level of significance, we would use the formula "=NORMSINV(0.035)" (since we want the area in each tail to be 0.035, or half of the 7% level).

This gives us a critical value of -1.812. For a right-tailed test at a 9% level of significance, we would use the formula "=NORMSINV(0.91)" (since we want the area to the right of the critical value to be 0.09, or 9%).

This gives us a critical value of 1.340. For a left-tailed test at a 3% level of significance, we would use the formula "=NORMSINV(0.03)" (since we want the area to the left of the critical value to be 0.03, or 3%).

This gives us a critical value of -1.880. Remember to round all answers to 3 decimal places.

learn more about Excel here: brainly.com/question/31409683

#SPJ11

The length of the hypotenuse of the right triangle with a leg length of 7 in is approximately 10 in.

Applying the 45º-45º-90º Triangle Theorem, the length of the hypotenuse of a right triangle can be found by multiplying the length of a leg by the square root of 2. In this case, with a leg length of 7 in, the length of the hypotenuse can be determined.

The 45º-45º-90º Triangle Theorem states that in a right triangle with two equal legs, the length of the hypotenuse is equal to the length of a leg multiplied by the square root of 2.

In this case, the length of one leg is given as 7 in. To find the length of the hypotenuse, we can multiply the length of the leg by the square root of 2:

Hypotenuse = Leg * sqrt(2)

Substituting the given value, we have:

Hypotenuse = 7 in * sqrt(2)

Using a calculator, the approximate value of the square root of 2 is 1.414. Therefore, we can calculate:

Hypotenuse = 7 in * 1.414 ≈ 9.898 in

Rounding to the nearest inch, the length of the hypotenuse is approximately 10 in.

to learn more about hypotenuse click here:

brainly.com/question/11958431

#SPJ11

For a continuous function, f and f(0) = -4 and f(10)= 1, the true value for some c in the interval (0,10) is equals the [tex]f'(c) = \frac{ 11 - (-4) }{10 - 0}[/tex] since mean value theorem applies.So, option(c) is right one.

The Mean Value Theorem is an important for determining the maximum and minimum values of a function on an interval. It is states that if a function is continuous on the interval [a, b] and differentiable on the open interval (a, b), then, there exists at least one point c∈(a,b) such that [tex]f'(c) = \frac{ f(b) - f(a)}{b - a}[/tex]. We have a function f is differentiable with f(0) = -4 and f(10) = 11.

We have to determine the true value for some c in the interval (0,10). According to mean value theorem, [tex]f'(c) = \frac{ f(b) - f(a)}{b - a}[/tex]

here, a = 0, b = 10 and f(0) = -4, f(10) = 11 so, we can write as [tex]f'(c) = \frac{ 11 -(-4) }{10 - 0}[/tex]

[tex]= \frac{ 11 + 4}{10 }[/tex] = 1.5

which is equivalent to expression present in option(c) in above figure. Hence, right option is option (c).

For more information about mean value theorem, visit :

https://brainly.com/question/30409016

#SPJ4

Complete question:

The above figure complete the question.

To evaluate each integral in terms of areas, we need to understand that the integral represents the area under the curve of a function, f(x), between two points on the x-axis.

Let's discuss each integral:

(a) ∫₀⁸ f(x) dx: This represents the area under the curve of f(x) from x = 0 to x = 8. The integral calculates the accumulated area along this interval.

(b) ∫₀²⁰ f(x) dx: Similarly, this represents the area under the curve of f(x) from x = 0 to x = 20. It's a broader interval than (a), so it covers more area under the curve.

(c) ∫²⁰²⁸ f(x) dx: This integral represents the area under the curve of f(x) between x = 20 and x = 28. It's important to note that the interval is now shifted to the right compared to (a) and (b).

(d) ∫¹²²⁸ f(x) dx: This integral calculates the area under the curve of f(x) from x = 12 to x = 28. The interval here is larger than in (c), covering more area under the curve.

(e) ∫¹²²⁸ |f(x)| dx: This integral evaluates the area under the absolute value of f(x) from x = 12 to x = 28. The absolute value ensures that negative function values contribute positively to the area calculation, preventing any cancelation of areas.

(f) ∫₀⁸ f(x) dx: This integral is the same as (a), representing the area under the curve of f(x) from x = 0 to x = 8.

Each integral evaluates the area under the curve of f(x) for different intervals on the x-axis, providing insights into the total accumulated area in those intervals.

To learn more about function  click here

brainly.com/question/12431044

#SPJ11

If you increase the data of a dot plot by a certain percentage, the shape and spread of the data on the plot may change depending on the nature of the data and the percentage of increase.

If you increase the data by a small percentage, the shape and spread of the data may remain relatively unchanged.

The distribution of the data on the plot may become slightly wider or taller, but the general pattern of the data may remain similar.

This is because small increases in data may not significantly affect the underlying distribution of the data.

If you increase the data by a larger percentage, the shape and spread of the data on the plot may change more significantly.

If the data is skewed or has outliers, a large increase in data may cause the distribution to become more symmetrical and the outliers to become less extreme.

On the other hand, if the data is already symmetric and has a narrow spread, a large increase in data may cause the distribution to become more spread out and potentially skewed.

To changing the shape and spread of the data, increasing the data by a percentage may also affect the center of the distribution.

If the original data was centered around a particular value, such as the mean or median, the center of the distribution may shift slightly as a result of the increased data.

This is because the additional data points may have values that are either above or below the original center of the distribution.

Increasing the data by a percentage can affect the shape, spread, and center of the data on a dot plot.

The extent of these changes depends on the nature of the data and the percentage of increase.

To carefully analyze the resulting dot plot to determine how the additional data has affected the distribution of the data.

For similar questions on Dot Plot

https://brainly.com/question/25957672

#SPJ11

The length of segment GE is 6√15 mm.

To find the length of segment GE, we need to use the fact that the medians of a triangle are concurrent at a point called the centroid, which divides each median into two segments in a 2:1 ratio. Specifically, the segment of the median that connects the centroid to a vertex is twice as long as the segment that connects the centroid to the midpoint of the opposite side.

Let M be the midpoint of BC, and let GE intersect AM at point H. Then, we know that GH is twice as long as HM, and we also know that GM is one-third the length of AM. Therefore, we can write:

GH = 2HM

GM = (1/3)AM

We can also use the fact that the medians of a triangle divide each other into segments in a 2:1 ratio. Specifically, we know that BD = (2/3)BM and CD = (2/3)CM. Since BG is a median, we know that BG = (2/3)BD, so we can write:

BG = (2/3)BD

24 mm = (2/3)(2/3)BM

BM = 27 mm

Now we can use the fact that GM is one-third the length of AM to find AM:

GM + MH = AM

(1/3)AM + GH = AM

GH = (2/3)AM

Substituting the expressions we found for GH and BM into the above equation, we get:

2HM = (2/3)AM - (1/3)AM

2HM = (1/3)AM

HM = (1/6)AM

We also know that BM = CM, since M is the midpoint of BC. Therefore, we can write:

BC = BM + CM

BC = 2BM

BC = 54 mm

Using the Pythagorean theorem, we can find AM:

[tex](AM)^{2}[/tex] = [tex](AG)^{2}[/tex] - [tex](GM)^{2}[/tex]

[tex](AM)^{2}[/tex]  = [tex](2BG)^{2}[/tex] - (1/9)[tex](BC)^{2}[/tex]

[tex](AM)^{2}[/tex] = 4[tex](24)^{2}[/tex] - (1/9)[tex](54)^{2}[/tex]^2

[tex](AM)^{2}[/tex] = 576 - 324/9

[tex](AM)^{2}[/tex] = 576 - 36

[tex](AM)^{2}[/tex] = 540

AM = √540 mm

AM = 6√60 mm

Finally, we can find GE by using the fact that GH is twice as long as HM:

GH = 2HM

GH = 2(1/6)AM

GH = (1/3)AM

Therefore, we can write:

GE = GH + HE

GE = (1/3)AM + (1/2)HM

GE = (1/3)(6√60 mm) + (1/2)(1/6)(6√60 mm)

GE = 2√60 mm + √60 mm

GE = 3√60 mm

Simplifying, we get:

GE = 3√60 mm = 6√15 mm

Correct Question :

In triangle ABC, BG = 24 mm. What is the length of segment GE where G is the point where all the medians meet and D, E and F are the points on the sides where median meet the side.

To learn more about length here:

https://brainly.com/question/22681923

#SPJ1

The expression represents the median benefit for this insurance policy is x = [250 - √(62500 + 4/c)] / 2

To determine the median benefit for this policy, we need to first understand the probability density function (PDF) associated with the policy. The PDF is a mathematical function that describes the probability of a random variable taking on a specific value. In this case, the random variable is the benefit amount provided by the insurance policy.

The cumulative distribution function (CDF) for this PDF is F(x) = cx(250 - x)/2. To find the value of x that corresponds to a cumulative probability of 0.5, we set F(x) = 0.5 and solve for x:

0.5 = cx(250 - x)/2

1 = cx(250 - x)

1/c = x(250 - x)

1/c = -x² + 250x

0 = -x² + 250x - 1/c

We can solve this quadratic equation using the quadratic formula, which gives us:

x = [250 ± √(250² - 4(-1/c)(-1))] / 2

Simplifying this expression gives us:

x = [250 ± √(62500 + 4/c)] / 2

Since we know that x cannot exceed 250, we take the negative root of the expression to get:

x = [250 - √(62500 + 4/c)] / 2

To know more about probability here

https://brainly.com/question/11234923

#SPJ4

If your data does not support your hypothesis, you may need to revise it or consider alternative explanations for the relationship between temperature and distance from the heat source.

When writing a hypothesis, it's important to start with a clear statement of the relationship you are exploring. In this case, you are investigating the relationship between temperature and distance from the heat source. Your hypothesis might be something like:

"As the distance from the heat source increases, the temperature will decrease."

To support this hypothesis, you would need to collect data that shows a clear trend in temperature as distance increases. You could create a scatterplot with distance on the x-axis and temperature on the y-axis, and look for a negative correlation between the two variables. You could also calculate a correlation coefficient, which would give you a numerical measure of the strength of the relationship.

If your data supports your hypothesis, you could then make conclusions about the relationship between temperature and distance from the heat source. For example, you could state that your data suggests that temperature decreases as distance from the heat source increases. You could also discuss the practical implications of this relationship, such as the importance of maintaining a safe distance from heat sources to prevent burns or fires.

To learn more about distance visit:

brainly.com/question/15172156

#SPJ11

The true population mean of yards per carry for all running backs, according to our 95% confidence level, is between 3.52 and 4.592 yards per carry.

We may use the Z-distribution to create a 95% confidence interval for the population mean because the population standard deviation is known and the sample size is more than 30.

The formula for the confidence interval is:

[tex]CI = x + Z\alpha /2 * \alpha /\sqrt{n}[/tex]

Where is the population standard deviation, n is the sample size, x is the sample mean, Z/2 is the Z-score corresponding to the desired degree of confidence (in this example, 95%), and is the Z-score.

From the given data, we have:

Sample mean [tex](x) = 4.056[/tex]

Population standard deviation [tex](\alpha ) = 1.35[/tex]

Sample size [tex](n) = 25[/tex]

Using a Z-table or calculator, we can find that the Z-score for a 95% confidence level is 1.96 (rounded to two decimal places).

When the values are added to the formula, we obtain:

[tex]CI = 4.056 + 1.96 * 1.35/x^{25}[/tex]

[tex]CI = 4.056 + 0.536[/tex]

[tex]CI = (3.52, 4.592)[/tex]

To know more about Normal Distribution visit:

https://brainly.com/question/29509087

#SPJ4

By the principle of mathematical induction, we have proved that P(n) is true for all positive integers n, which completes the proof.

Let P(n) be the statement "If n straight lines are drawn in the plane, the regions formed can be colored with two colors in such a way that no two regions that share a common edge have the same color."

Base case: P(1) is true, as there is only one line and it divides the plane into two regions that can be colored with two different colors.

Inductive hypothesis: Assume P(k) is true for some arbitrary value of k, where k is a positive integer. That is, we assume that if k straight lines are drawn in the plane, the regions formed can be colored with two colors in such a way that no two regions that share a common edge have the same color.

Inductive step: We want to prove that P(k+1) is true, i.e., if (k+1) straight lines are drawn in the plane, the regions formed can be colored with two colors in such a way that no two regions that share a common edge have the same color.

Consider the (k+1)th line. It intersects the existing k lines in k+1 points, dividing the plane into k+2 regions. We can choose one of these regions to be unbounded and assign it one color, say white. We can then color the remaining k+1 regions with two colors (white and black) such that no two regions that share a common edge have the same color, by using the coloring scheme for P(k) that we assumed to be true.

Now we have colored k+2 regions in total, with no two adjacent regions sharing the same color. Therefore, P(k+1) is true.

Hence, By the principle of mathematical induction, we have proved that P(n) is true for all positive integers n, which completes the proof.

To know more about regions check the below link:

https://brainly.com/question/28747454

#SPJ4

Complete questions:

Use mathematical induction to show that if you draw lines in the plane you only need two colors to color the regions formed so that no two regions that have an edge in common have a common color.

The expected value of x is 18. We can interpret this as saying that if we were to repeat this experiment many times (tossing a fair coin 10 times), we would expect to see HH appear an average of 18 times in each sequence of 10 tosses.

What is probability?

Probability is a measure of the likelihood of an event occurring. It is a number between 0 and 1, where 0 means the event is impossible and 1 means the event is certain to happen.

We can start by using the definition of expected value, which is the sum of all possible outcomes multiplied by their respective probabilities. In this case, we need to find the probability of getting two heads in a row (HH) in a sequence of 10 coin tosses, and then multiply it by the number of times we expect to see it (the expected value).

Let's start by finding the probability of getting HH in a sequence of two coin tosses. Since the coin is fair, there are two possible outcomes for each toss (H or T), and they are equally likely.

Therefore, the probability of getting HH is:

P(HH) = 1/2 * 1/2 = 1/4

Now, let's consider the sequence of 10 coin tosses. We can count the number of times that HH appears by counting the number of times we get two heads in a row in each possible position of the sequence. For example, if the sequence is:

T H H T H H H H T T

we can see that there are two occurrences of HH, one in the second and third positions, and one in the fifth and sixth positions.

To count the total number of occurrences of HH in a sequence of 10 coin tosses, we need to consider all possible positions of the two heads. There are nine possible positions where the first head can appear, and in each of these positions, there are eight possible positions where the second head can appear (since we don't want to count overlapping occurrences). Therefore, there are a total of 9*8 = 72 possible positions where HH can appear.

Now, we need to find the probability of getting HH in each of these positions. Since the coin tosses are independent, the probability of getting HH in any given position is the same as the probability of getting HH in two tosses (1/4). Therefore, the probability of getting HH in any of the 72 possible positions is:

P(HH) = 1/4

To find the expected value of x, we need to multiply the probability of getting HH in any given position (1/4) by the total number of possible positions (72):

E(x) = P(HH) * 72 = 1/4 * 72 = 18

Therefore, the expected value of x is 18. We can interpret this as saying that if we were to repeat this experiment many times (tossing a fair coin 10 times), we would expect to see HH appear an average of 18 times in each sequence of 10 tosses.

To learn more about probability from the given link:

https://brainly.com/question/30034780

#SPJ4

The measure of x in the parallel line is 57 degrees.

When parallel lines are crossed by a transversal line, angle relationships

are formed such as alternate interior angles, alternate exterior angles,

same side interior angles, vertically opposite angles, corresponding angles

etc.

Therefore, let's use the angle relationship to find the angle x as follows:

x + 123 = 180(same side interior angles)

subtract 123 from both sides of the equation

x = 180 - 123

Therefore,

x = 57 degrees

learn more on angles here: https://brainly.com/question/29430493

#SPJ1

Answer:

Step-by-step explanation:

The length of the other diagonal is 26cm. This can be calculated using the formula for a rhombus, which states that the product of the diagonals is equal to the square of the length of the sides. Therefore, 30cm * 26cm = 17cm * 17cm, so the other diagonal is 26cm.

The correct option is c) between 32 and 37. The box part of the box plot contains all the values between 32 and 37.

A box-and-whisker plot, also known as a box plot, is a visual representation of a set of data that shows the distribution and variability of the data. The box part of the box plot contains the middle 50% of the data, which is also known as the interquartile range (IQR).

In the given example, the box ranges from 32 to 37, which means that 50% of the data falls within this range. The line that divides the box at 36 represents the median, which is the middle value of the data set.

The whiskers, on the other hand, extend from the box to the minimum and maximum values in the data set that are not considered outliers. In this example, the whiskers range from 27 to 40, which means that the minimum and maximum values in the data set are 27 and 40 respectively.

Therefore, the answer to the question is option C, between 32 and 37, as this is the range that the box covers. The other options do not correctly represent the range of values that fall within the box.

Overall, box-and-whisker plots are useful tools for summarizing and comparing data sets, as they provide a clear and concise visual representation of the distribution and variability of the data.

To learn more about box plot, refer here:

https://brainly.com/question/1523909#

#SPJ11

Based on the simple linear regression results for the car's mileage, we can estimate the effect of octane levels on the car's performance.

Using a 71% confidence interval and rounding to 3 decimal places, we can say with some confidence that the impact of octane levels on the car's mileage is between -0.045 and 0.102.

This means that while there is some correlation between octane levels and mileage, the effect is relatively small and falls within a narrow range of values. It's worth noting that there may be other factors at play that influence the car's performance, so this result should be interpreted with caution.

Learn more about linear regression here:

brainly.com/question/14313391

#SPJ11

The given distribution is a Geometric distribution since it represents the number of trials needed to achieve the first success with a fixed probability of success for each trial.

What is Geometric distribution?

The Geometric distribution is a probability distribution that models the number of independent and identical Bernoulli trials needed to achieve the first success. In other words, it describes the probability of observing the first success on the kth trial, where k can take on non-negative integer values. The distribution is characterized by a single parameter p, the probability of success in each trial. The pmf of the Geometric distribution is P(X=k) = (1-p)^(k-1)*p for k = 1, 2, 3, ..., where X is the random variable representing the number of trials needed to achieve the first success.

The given distribution is a Geometric distribution, since we are interested in the number of trials (draws) needed to achieve the first success (drawing a jack). The probability of success (drawing a jack) remains the same for each trial, and each trial is independent. Therefore, the distribution of the number of trials needed to achieve the first success follows a Geometric distribution with parameter p, where p is the probability of drawing a jack on each trial.

To know more about Geometric distribution visit:

https://brainly.com/question/30478452

#SPJ4

the confidence intervals for the two groups overlap, and one cannot conclude that one group clearly has a higher proportion in the population than the other.

One cannot say with certainty that in the population more people clearly like buying food at the movies based solely on the given poll results. While 49% of individuals in the poll indicated that they liked buying food at movies, the margin of error is +/- 2%, which means that the true proportion of individuals who like buying food at movies could be as low as 47% or as high as 51%. Similarly, the true proportion of individuals who do not like buying food at movies could be as low as 40% or as high as 44%.

what is proportion?

proportion refers to a measure that expresses the size of one subset (e.g., the number of individuals with a certain characteristic) relative to the size of the entire group or population being considered.

To learn more about proportion visit:

brainly.com/question/30657439

#SPJ11

The solution for z is 0.

What is the equivalent expression?

Equivalent expressions are expressions that perform the same function despite their appearance. If two algebraic expressions are equivalent, they have the same value when we use the same variable value.

Assuming the equation is:

1 + iz = 1 - iz

We can start by isolating the term with z on one side:

1 + iz = 1 - iz

2iz = 0

Divide both sides by 2i:

z = 0

Therefore, the solution for z is 0.

To learn more about the equivalent expression visit:

https://brainly.com/question/2972832

#SPJ4

Complete Question:

Solve for z in the following equation: 1-iz = -1 + iz (where i^2 = -1).

Simplify your answer as much as possible.

The coordinates of the center are (-1, 8) and the length of the radius is 4 units.

The equation of a circle can be written in the form:

[tex](x - h)^2 + (y - k)^2 = r^2[/tex]

Where (h, k) is the center of the circle, and r is the radius.

Starting with the given equation:

[tex]x^2 + y^2 + 2x - 16y + 49 = 0[/tex]

Completing the square for x and y, we get:

[tex](x + 1)^2 - 1 + (y - 8)^2 - 64 + 49 = 0[/tex]

Simplifying, we get:

[tex](x + 1)^2 + (y - 8)^2 = 16[/tex]

So the center of the circle is (-1, 8) and the radius is 4.

Now we can see that the center of the circle is (-1, 8) and the radius is 4. Therefore, the coordinates of the center are (-1, 8) and the length of the radius is 4 units.

To know more about Coordinates visit:

https://brainly.com/question/16634867

#SPJ4

A net of a square pyramid. The square base has a base and height of 6 feet. There are four triangles that have a base of 6 feet and a height of 4 feet.

To find the total surface area of the pyramid, we need to find the area of each of the five faces and then add them up.

The area of the square base is

6 ft x 6 ft = 36 sq ft

Each of the four triangular faces has an area of

(1/2) x base x height = (1/2) x 6 ft x 4 ft = 12 sq ft

So the total area of the four triangular faces is

4 x 12 sq ft = 48 sq ft

Finally, we need to find the area of the fifth face, which is the bottom of the pyramid. Since it is also a square with side length 6 ft, its area is

6 ft x 6 ft = 36 sq ft

Therefore, the total surface area of the pyramid is

36 sq ft (square base) + 48 sq ft (four triangular faces) + 36 sq ft (bottom) = 120 sq ft.

[tex]\left[\begin{array}{ccc}\1120 square feet\\\end{array}\right][/tex]

Therefore, the total surface area of the pyramid is 120 square feet.

To know more about square pyramid here

https://brainly.com/question/27681171

#SPJ1

There is an inverse relationship between the EBP and the required sample size. As the EBP increases, the required sample size decreases, and vice versa.

As the error bound of the proportion (EBP) increases, the required sample size decreases.

The EBP is a measure of the maximum error that is allowed in estimating a population proportion using a sample proportion. It is calculated as the difference between the sample proportion and the true population proportion, divided by the sample proportion. For example, an EBP of 0.02 means that the estimated proportion could differ from the true population proportion by up to 2%.

When the EBP is large, it means that the allowable margin of error is also large, so we do not need as large a sample size to achieve the desired level of precision in our estimate. In other words, if we are willing to tolerate a larger error in our estimate, we can use a smaller sample size to achieve the same level of accuracy.

Conversely, when the EBP is small, it means that the allowable margin of error is also small, so we need a larger sample size to achieve the desired level of precision in our estimate. This is because a smaller margin of error requires a more precise estimate, which in turn requires a larger sample size to reduce the effect of random sampling variability.

Therefore, there is an inverse relationship between the EBP and the required sample size. As the EBP increases, the required sample size decreases, and vice versa.

Learn more about inverse relationship

https://brainly.com/question/28628342

#SPJ4

To form a triangle, the sum of the lengths of any two line segments must be greater than the length of the third side. This is known as the triangle inequality theorem. For example, if we have line segments with lengths of 5, 7, and 10 units, we can add the first two lengths (5+7=12) and compare it to the length of the third side (10). Since 12 is greater than 10, we can form a triangle with these line segments.

On the other hand, if we have line segments with lengths of 3, 6, and 10 units, we can add the first two lengths (3+6=9) and compare it to the length of the third side (10). Since 9 is not greater than 10, we cannot form a triangle with these line segments.

Therefore, the set of line segments that do not meet the requirements to form a triangle are those where the sum of any two lengths is equal to or less than the length of the third side. It is important to remember the triangle inequality theorem when working with triangles, as it is a fundamental rule that determines if a set of line segments can form a triangle or not.

learn more about triangles here: brainly.com/question/11070154

#SPJ11