What will happen to the period of a ball-on-a-spring if the ball is replaced by a smaller one with half the mass
When the ball on a spring is replaced by a smaller ball with half the mass : The period decrease by 29%
Calculate the Period
We will apply the formula below to calculate period
T = [tex]2\pi \sqrt{\frac{m}{k } }[/tex]
where :
T₁ / T₂ = [tex]\sqrt{\frac{m_{1} }{m_{2} } }[/tex] where m₂ = m₁ / 2
Therefore :
T₂ = [tex]\frac{T_{1} }{\sqrt{2} }[/tex] = 0.71 T
Hence we can conclude that the period will decrease by 29% ( i.e 100 - 71 ).
Learn more about Period calculation : https://brainly.com/question/10728818
Ayo? i need help asap
Let's do some calculation! Using the information below, calculate the speed of the wave. MAKE SURE TO INCLUDE YOUR UNITS!
wavelength = 2.3 cm and frequency = 3.7 Hz
Hello people ~
If a +ve charge is moved from low to high
potential region, the electric potential energy:
(a) decreases
(b) increases
(c) remain the same
(d) may increase or decrease
Answer:
The answer is increases.
Explanation:
When positive charge is shifted from a low potential to a high potential region, the electric potential energy increases.
Explanation:
Electric potential energy directly depends upon potential region
Charge always flows from higher density to lower density in case of negative and for positive charge it's vice versa
Hence correct choice is option B
Which of the following limiting factors would be directly affected by a drought? a. birth/death rate b. immigration c. available niche d. resource supply Please select the best answer from the choices provided A B C D
Answer:
C. answer pa brailest need lang po please
D. Resource Supply this would be directly affected first then the rest would follow after a period of time.
please help i’m so lost✋:
Place the following events describing the production of electrical energy from a nuclear fission reactor in the correct order. Write the numbers 1 (first) through 7 (fast) in the spaces provided.
The thermal energy from nuclear reactions is first converted to mechanical energy and finally to electrical energy for use by the community.
What is nuclear energy?Nuclear energy is the energy produced as a result of changes that occur in the nucleus of atoms of elements. These changes are known as nuclear reactions.
Electrical energy can be generated from nuclear reactions.
The steps in the generation of electrical energy from nuclear reactions is as follows:
A neutron bombards a uranimu-235 isotope A uranium-235 atom splits, producing atoms with smaller nuclei, three neurons, and thermal energythermal energy released by the react ion is added to water superheated water passes through a thermal exchanger, where the thermal energy released boil a separate system of water to produce steam steam produced by boiling water causes the blade of a turbine to rotate The mechanical energy of the rotating turbine is transferred to an electric generator electricity from the generator is carried to the community through wires.Therefore, the thermal energy from nuclear reactions is converted to electrical energy for use by the community.
Learn more about nuclear reactions at: https://brainly.com/question/25387647
When you transfer energy to a drum through a drumstick or your handhow does the amount of energy affect the sound the drum makes? Explain using the Crosscutting Concept of Energy and Matter
Answer:
Striking the head of the drum changes its shape and compresses the air inside the shell. The compressed air presses on the bottom head and changes its shape. Then, these changes are transmitted to the drum shell and reflected back, and this action is repeated, creating a vibration. These vibrations of the top and bottom heads create vibrations in the air, which become sound, and eventually, as the head vibrations are dampened, the sound diminishes.
Explanation:
An object is thrown straight upward from the edge of a building with a velocity of 20m/s. Where will the object be 5s after it was thrown
Explanation:
V = S/t
s =vt
d = 20 x 5
d = 100m
The position of the ball 5 seconds after it was thrown will be 25 m below the edge of building.
What are the three equations of motion?
The three equations of motion are -
v = u + at
S = ut + 1/2at²
v² - u² = 2aS
Given is an object which is thrown straight upward from the edge of a building with a velocity of 20m/s.
Initial velocity [u] = 20 m/s
Acceleration due to gravity [g] = - 10 m/s² (Rounded off 9.8)
At maximum height, the velocity will be 0.
Assume that the time at which the ball reaches max height be T.
Using first law of motion -
v = u + aT
0 = 20 - gT
gT = 20
T = 20/g
T = 20/10
T = 2 sec
Then -
S[max] = 20 x 2 - 0.5 x 10 x 4
S[max] = 40 - 20 = 20 m
At t = 2 sec the ball will be at maximum height. Now at maximum height, the initial velocity of the ball will be 0.
We have to find the position of ball after 3 seconds as after 2 seconds it was at maximum height.
In this case initial velocity will be [u] = 0
Acceleration [a] = 10 m/s²
Time [t] = 3 sec
Using second equation of motion -
S = ut + 1/2at²
S = 0.5 x 10 x 9
S = 45 m
Position of object = [x] = 20 - 45 = - 25 m
The negative sign indicates that the object is now 25 cm below from the edge of building.
Therefore, the position of the ball 5 seconds after it was thrown will be 25 m below the edge of building.
To solve more questions on Kinematics, visit the link below-
https://brainly.com/question/2288973
#SPJ5
What are dogs trained to do when they find an explosive device?.
Answer:
They sit or lay quietly
Explanation:
That's what they are trained to do when they find a explosive device
Someone please help me, I know I already asked a question please don't think I not smart, but
#1. How are potential and kinetic energy related?
#2. How are sounds made?
Answer:
PE is related to the ability to do work, If an item is sitting on a shelf
it has potential energy relative to its position on the floor, However, if the object were to fall it would hit the floor with a KE equal to the PE that it had sitting on the shelf.
Sounds are caused by compressional waves in the air - when a piano key is struck or a TV is turned on, then compressional waves are produced in the surrounding air due to a disturbance. The human ear recognizes the disturbed air as due to the object that created the disturbance.
Mars moves in an elliptical orbit around the Sun. The location of the Sun relative to this ellipse is
Answer:
It is when the focus of the ellipse that is closer to the point where Mars is moving the fastest.
Explanation:
I hope it helps! Have a great day!
Anygays-
How does earths magnetic field protect us from solar flares
Answer:
Earth's magnetic field serves to deflect most of the solar wind, whose charged particles would otherwise strip away the ozone layer that protects the Earth from harmful ultraviolet radiation.
Answer:
Earth's magnetic field serves to deflect most of the solar wind,
whose charged particles would otherwise strip away the ozone layer that
protects the Earth from harmful ultraviolet radiation.
How much magnification is needed to see a nanometer?.
Continuous signals are characterized as . signals that are broken up into binary code are characterized as . an am/fm radio is a good example of technology. a smart phone is a good example of technology.
Continuous signals are characterized as analog signals that are broken up into binary code are characterized as digital.
An am/fm radio is a good example of analog technology. A smart phone is a good example of digital technology.
What is a Digital technology?These are devices that generate, store or process data while analog is a continuous signal that represents physical measurements.
The examples of analog and digital technology are mentioned above and is the most appropriate choice.
Read more about Analog and digital technology here https://brainly.com/question/26307469
Answer:
Analog, Digital, Analog, Digital
Explanation:
edge 2022
A 2.3-kg toy locomotive is pulling a 1.4-kg caboose. The frictional force of the track on the caboose is 0.46 N backward along the track. If the train is accelerating forward is 3.1 m/s2, what is the magnitude of the force exerted by the locomotive on the caboose
The net vertical force on the caboose (C) is
∑ F[v, C] = F[n, C] - (1.4 kg) g = 0
where F[n, C] is the magnitude of the normal force exerted by the track on the caboose; so we have
F[n, C] = (2.3 kg) g = 13.72 N
which means the coefficient of kinetic friction µ between the caboose and the track is
F[f, C] = 0.46 N = µ (13.72 N) ⇒ µ = (0.46 N) / (13.72 N) ≈ 0.034
and presumably the coefficient is the same for the locomotive.
The net vertical force on the locomotive (L) is
∑ F[v, L] = F[n, L] - (2.3 kg) g = 0
where F[n, L] is the magnitude of the normal on the locomotive, so that
F[n, L] = (2.3 kg) g = 22.54 N
and so the locomotive is opposed by a frictional force with magnitude
F[f, L] = µ (22.54 N) ≈ 0.76 N
Taking the locomotive and caboose together, the net horizontal force on the system is
∑ F[h] ≈ - F[f, C] - F[f, L] + F[engine] = (2.3 kg + 1.4 kg) (3.1 m/s²)
Solve for F[engine] :
F[engine] ≈ (3.7 kg) (3.1 m/s²) + 0.46 N + 0.76 N ≈ 13 N
How do you boost the amount of electricity a fuel cell system produces?.
The amount of electricity a fuel cell system produces is boost by combined to form a fuel cell that is battery.
What is battery?A battery is a device that uses an electrochemical oxidation-reduction (redox) cycle to turn the chemical energy included in its active components directly into electric energy. An electric circuit is used in this kind of reaction to transmit electrons from one substance to another.
The actual elector-chemical unit used to produce or store electric
For this one it should be A single fuel cell generates approximately one volt of electricity. Individual fuel cells are combined to form a fuel cell stack to enhance the amount of electricity produced.
The amount of electricity a fuel cell system produces is boost by combined to form a fuel cell that is battery.
To learn more about battery refer to the link:
brainly.com/question/19225854
#SPJ2
help pls i been stuck on this for 40 mins already
Answer:
See below
Explanation:
At A they add together (they are both positive)= construct
At B they destruct ( one is neg and one is pos)
c destruct d destruct e construct (both neg)
Is it possible for a person to have zero mechanical energy? Why or why not?
Answer: No
Explanation:
There are a few explanations as to why. I'm not sure as to what level of an explanation you are looking for. A person's body is made of atoms, which have constant motion due to multiple processes. An atom can never ever be frozen to absolute zero motion, we can only approach that value. Therefore, we will always have kinetic energy. Another explanation is Einstein's famous formula E = mc^2. This is the rest mass energy, which all things with mass obey. There is an energy-mass equivalence.
What is the difference between organic and inorganic material?
Organic materials comes from living things while inorganic materials comes from non living things
Organic materials are those composed mainly of carbon they are derived from living things while inorganic materials are derived from non living things sucjh as rocks etc
Which of the following is an example if harmonic motion?
Answer:
"A pendulum swinging back and forth" is an example of harmonic motion
X = Xo cos ω t
Explains the back and forth motion of the pendulum
For added effect, he takes the monitor up to the roof which is about 84 m above the ground. What is the velocity of the monitor as it hits the ground?
The velocity of the monitor as it hits the ground is equal to 40.58 m/s.
Given the following data:
Height = 84 meters.Scientific data:
Acceleration due to gravity (g) = [tex]9.8 m/s^2.[/tex]How to calculate the velocity.In accordance with the law of conservation of energy, the potential energy possessed by the monitor at the roof top would be equal to the kinetic energy possessed by the monitor at the ground:
[tex]PE=KE\\\\mgh=\frac{1}{2}mv^2\\\\2mgh=mv^2\\\\V=\sqrt{2gh}\\\\V=\sqrt{2 \times 9.8 \times 84}\\\\V=\sqrt{1646.4}[/tex]
V = 40.58 m/s.
Read more on kinetic energy here: brainly.com/question/1242059
define 1 calorie heat
Answer:
"One calorie of heat is defined as the amount of heat needed to raise the temperature of one gram of water by one degree Celsius"
Hope this Helps!
Explanation:
One calorie of heat is defined as the amount of heat needed to raise the temperature of one gram of water by one degree Celsius (or one kelvin).
If the distance between two objects is tripled, what happens
to the gravitational force between them?
A. It decreases to 1/3 its original magnitude.
B. It increases to 9 times its original magnitude.
C. It increases to 3 times its original magnitude.
D. It decreases to 1/9 its original magnitude.
.
Answer:
D)it decreases to 1/9 its original magnitude
describe the ways that people are trying to use technology to protect the environment and increase sustainability.
WILL NAME BRAINLIEST please help
Answer:
One way people are using technology to protect the environment is:
Using digital devices for communicating and storing information means that there is less reliance on paper, which reduces deforestation. Since trees are an important source of oxygen and also absorb carbon dioxide, this further reduces climate change.
Environmental technology has enabled us to capture this naturally occurring energy and convert it into electricity or useful heat through devices such as solar panels, wind, and water turbines.
Explanation:
Have a great of your day
#TheWizzer
A force of 20 N is applied tangentially to a wheel of mass 10 kg and diameter 5 m. Calculate the torque applied and angular velocity at the end of 10 second?
Answer:
N = 2010 + 10 + -5 = 20N + -5 = 10 -5 + 20Therefore , the answer is N=20Explanation:
#BrainliestBunchA car is traveling on the road at a velocity (Vx) of 35m/s. A person in the passenger seat
has a tennis ball and is tossing the ball up in the air to himself. He throws the ball directly up
with a velocity (Vy) of 3m/s. An outside observer is sitting on a bench on the side of the street
watching the car pass.
a) To the person inside the car, the ball travels directly up and down. But to the
outside observer, what is the launch angle of the ball?
b) What is the ACTUAL Speed (IVI) of the ball when it leaves the person's hand?
c) What is the maximum height the ball will reach in the car?
d) How long will the ball stay in the air?
e) How far will the ball travel in the direction of travel on the road?
(a) The launch angle of the ball is 5⁰.
(b) The actual speed of the ball when it leaves the person's hand is 35.13 m/s.
(c) The maximum height reached by the ball is 0.46 m.
(d) The time spent in air by the ball is 0.26 s.
(e) The horizontal distance traveled by the ball on the road is 4.55 m.
Launch angle of the ball
The launch angle of the ball is calculated as follows;
[tex]tan(\theta) = \frac{V_y}{V_x} \\\\\theta = tan^{-1} (\frac{3}{35} )\\\\\theta = 5\ ^0[/tex]
Actual speed of the ballThe actual speed of the ball when it leaves the person's hand is calculated as follows;
[tex]V = \sqrt{V_x^2 + V_y^2} \\\\V = \sqrt{(35)^2 + (3)^2} \\\\V = 35.13 \ m/s[/tex]
The maximum height reached by the ballThe maximum height reached by the ball is calulated as follows;
[tex]Vy_f^2 = V_y_i^2 - 2gh\\\\0 = 3^2 - 2(9.8)(h)\\\\19.6h = 9\\\\h = \frac{9}{19.6} \\\\h = 0.46 \ m[/tex]
Time spent in air by the ballThe time spent in air by the ball is calculated as follows;
[tex]h=V_yt + \frac{1}{2} gt^2\\\\0.46 = 3t + 4.9t^2\\\\4.9t^2 +3t - 0.46 = 0\\\\a = 4.9, \ b = 3, \ c =- 0.46\\\\t = \frac{-b \ \pm \ \sqrt{b^2 - 4ac} }{2a} \\\\t = 0.13 \ s[/tex]
Total time for upward and downward motion = 2(0.13 s) = 0.26 s
Horizontal distance traveled by the ballX = Vx(t)
X = 35 x 0.13
X = 4.55 m
Learn more about time of motion here: https://brainly.com/question/2364404
b. The silica cylinder of a radiant wall heater is 0.6 m long
and has a radius 6 mm. If it is rated at 1.5 kw estimate
its temperature when operating. [The Stefan constant,
6=6 x 10-8 wm-2-4)
Ans: 1025 K
So, If the silica cyliner of the radiant wall heater is rated at 1.5 kw its temperature when operating is 1025.3 K
To estimate the operating temperature of the radiant wall heater, we need to use the equation for power radiated by the radiant wall heater.
Power radiated by the radiant wall heaterThe power radiated by the radiant wall heater is given by P = εσAT⁴ where
ε = emissivity = 1 (since we are not given), σ = Stefan-Boltzmann constant = 6 × 10⁻⁸ W/m²-K⁴, A = surface area of cylindrical wall heater = 2πrh where r = radius of wall heater = 6 mm = 6 × 10⁻³ m and h = length of heater = 0.6 m, and T = temperature of heaterSince P = εσAT⁴
P = εσ(2πrh)T⁴
Making T subject of the formula, we have
Temperature of heaterT = ⁴√[P/εσ(2πrh)]
Since P = 1.5 kW = 1.5 × 10³ W
Substituting the values of the variables into the equation, we have
T = ⁴√[P/εσ(2πrh)]
T = ⁴√[1.5 × 10³ W/(1 × 6 × 10⁻⁸ W/m²-K⁴ × 2π × 6 × 10⁻³ m × 0.6 m)]
T = ⁴√[1.5 × 10³ W/(43.2π × 10⁻¹¹ W/K⁴)]
T = ⁴√[1.5 × 10³ W/135.72 × 10⁻¹¹ W/K⁴)]
T = ⁴√[0.01105 × 10¹⁴ K⁴)]
T = ⁴√[1.105 × 10¹² K⁴)]
T = 1.0253 × 10³ K
T = 1025.3 K
So, If the silica cylinder of the radiant wall heater is rated at 1.5 kw its temperature when operating is 1025.3 K
Learn more about temperature of radiant wall heater here:
https://brainly.com/question/14548124
The students changed the release distance of the sphere during their investigation. Which statements best describe the purpose for increasing the release distance between the trials? Select all that apply.
A. to indicate balanced forces are acting on the spheres
B. to determine the types of forces acting on the spheres
C. to measure the strength of the force acting on the spheres
D. to change the direction of the force acting on the spheres
E. to observe the effect of unbalanced forces acting on the spheres
Since unbalanced forces acts on the spheres, the aim of increasing the release distance of the spheres is to observe the effect of unbalanced forces acting on the spheres.
What is an experiment?An experiment is a study whose objective is to study cause and effect relationships. In this case, the students had to increase the distance at which the spheres was released.
The aim of increasing the release distance of the spheres is to observe the effect of unbalanced forces acting on the spheres.
Learn more about experiments: https://brainly.com/question/11256472
m=3000km v=25m/s what’s the momentum?
Answer:
75000kg m/s
Explanation:
Momentum = Mass X Velocity
p = mv
3000 X 25 = 75000 kg m/s
Analysis: (use a separate sheet of paper)
1. Write a scientific explanation about the relationship between frequency, wavelength, and
wave speed. Make sure to cite specific evidence from your investigation.
2. In one or two sentences describe how the frequencies of the different harmonic patterns
are related to each other.
3. If the frequency, increases what happens to the wavelength?
Speed, frequency and wavelength are interconnected to each other.
What happens to the wavelength if the frequency increases?As a wavelength increases in size, its frequency and energy (E) decrease. As the frequency increases, the wavelength gets shorter. As the frequency decreases, the wavelength gets longer.
The wave speed is equal to the product of its frequency and wavelength, which shows the relationship between frequency and wavelength.
So we can conclude that speed, frequency and wavelength are interconnected to each other.
Learn more about frequency here: https://brainly.com/question/254161
Ryan holds a ball still at position A and then releases it. His friend stops the ball at position F. The image shows the path of the ball from position A to position F. Identify the kind of energy the ball has at each position. PE
KE
PE and KE
Answer:
See below
Explanation:
a PE only...the ball is not moving
b and c PE and KE
d KE only
e and f PE and KE
The energy of the ball at its highest position is potential energy.
What is law of conservation of energy ?The law of conservation of energy states that, energy can neither be created nor destroyed. Despite this, it is capable of changing its form. The sum of the energies in an isolated system is constant regardless of the types of energy present.
Here,
According to law of conservation of energy, at each position of the ball, it will have some amount of energy.
At point A
The ball is at its highest position, that means maximum height. So, the energy of the ball at that position is potential energy and it doesn't have any kinetic energy.
At points B and C
At these positions the ball is moving downwards. That means the potential energy is being converted into kinetic energy of the ball. So, it has both PE and KE.
At point D
The ball is at the lowest position, on the ground. So, the potential energy is zero. Therefore, it has the kinetic energy.
At points E and F
At these positions, the ball is moving upwards. So, it has both PE and KE.
Hence,
The energy of the ball at its highest position is potential energy.
To learn more about law of conservation of energy, click:
https://brainly.com/question/29775341
#SPJ5
