2. Because she has a Victim mindset and having low grade in her Math class, Julianna believes
O a. her low grades are the fault of her unfair teacher.
O b. she needs to take an easier class.
O c. that working with a tutor is the only way for her to pass the class.
O d. she can improve her grades if she studies more.

Answer:

Stop Sign

Explanation:

It's red and shaped like an octogon

Answer:

The measuring tape is used to measure objects. It makes objects with two faces easier to measure, as it would be more difficult to use a ruler to measure two faces. You measure to increase accuracy. If you're trying to build something out of 12 inches of wood, you can't just look at the wood and assume it is 12 inches long. In engineering, it's necessary to measure during every project.

Explanation:

Since Walter is editing the camera in his workspace, if he wants to adjust how much of the scene can be seen all at once, the property which he can edit is: D. field of view.

A camera operator can be defined as an individual who is professionally trained to tweak, operate and use a digital camera, especially for the purpose of taking pictures or images (photographs) of an event, place, person, etc.

A camera lens can be defined as a transparent optical instrument that is used in conjunction with a digital camera, so as to refract the rays of light coming into the lens.

A field of view can be defined as a range of the observable physical world that is visible to a camera operator at any period of time, especially through the human eye, on a display monitor (screen), or a digital camera viewfinder.

In this context, we can reasonably infer and logically deduce that the property which Walter can edit is the field of view of his digital camera.

Read more on digital camera here: brainly.com/question/22789334

#SPJ1

Answer:A saxophone is a instrument

Explanation:type of single-reed woodwind instrument with a conical body, usually made of brass. As with all single-reed instruments, sound is produced when a reed on a mouthpiece vibrates to produce a sound wave inside the instrument's body.

Answer: yes

Explanation:

Answer:

The whole lifting system is called the headgear. There are four main parts to a mine's headgear: Part 1: The winch or hoist is in a winding house. This part of the system is used to wind or unwind the steel cable. The hoist is attached to a motor and a control system.

Explanation:

At least five fundamental components must be considered when creating a framework for risk management. They are risk governance, risk reporting and monitoring, risk reporting and assessment, risk mitigation, and risk identification.

They are aware of the potential effects those risks could have on the company and what preventative measures or backup plans should be put in place.

In order to set objectives or budgets, it is essential to analyze your growth and performance, which analytics help you do.

Risk managers find it challenging to reflect on the past or plan for the future without analytics. They make it straightforward to raise any company's productivity and effectiveness.

Therefore, risk managers are aware of all potential risks in their domain and, if feasible, beyond.

Learn more about risk manager here:

https://brainly.com/question/4680937

#SPJ2

Answer: Can't help

Explanation:

Answer:

Completed load manifest, dispatch release and flight plan

Answer:

i think D

Explanation:

The IN operator is indeed a logical operator that lets you see if a given value matches any value in a list.

In a where clause, you can use the IN operator to specify multiple values. The IN operator denotes multiple OR conditions.

The IN operator is used in the where clause to specify a list of values or a sub query. In the parenthesis, a sub-query or list of values must be specified, such as IN (value1, value2,...) or IN (Select query)

IN is a SQL operator that determines whether an attribute value matched any of the values in the given list.

Thus, the answer is IN operator.

For more details regarding SQL operator, visit:

https://brainly.com/question/20713669

#SPJ1

Small particles in your power steering system may Damage the hydraulic pump.

Check more about the reason for the above in the power steering system below:

If a person is said to have notice that there is  small black particles that can be seen inside of the power steering reservoir, there is therefore some chances that are these are some piece of the hose, instead of  the pump or rack.

Since High-temperature pulsations can be able to lead the power steering hoses to be destroyed  from the inside.

Therefore, based on the above, one can say that Small particles in your power steering system may Damage the hydraulic pump.

Learn more about power steering system   from

https://brainly.com/question/21346765
#SPJ1

The maximum registering thermometer is required for measuring the sanitizing rinse temperature in a high-temperature dishwashing machine.

A dishwashing machine can be designed as a mechanism through which various this she as cutlery or crockery is being watched. The machine uses water, heat, and air pressure to clean the dishes.

The heat capacity at the plenum should always be monitored by a constructed meter on the dishwashing.

The maximum registering thermometer takes the temperature into notice and takes that this will be the recorded temperature.

Learn more about dishwashing machine, here:

https://brainly.com/question/14298877

#SPJ1

Answer:

Hope this helps :)

1. Define/Find the problem.

2. Explore/Research/Collect information.

3. Design the best solution base on your ideas/thoughts.

4. Create the solution.

5. Try the creation, put it to test/work.

6. Make the creation better, modify it.

Also, some additional steps are ...

7. Evaluate the solution, finishing thoughts/ideas.

8. Share your results with other engineers/people, final steps

Answer:

is it a free point? or just a question if it is kindly respond

The temperature of the filament within the lightbulb can be altered by a factor of 10²⁵ by applying the blackbody radiation formula.

To tackle this issue, we need to understand black body radiation. A black body object's energy emission is inversely proportional to its area and the temperature to the fourth power. It can be calculated using the formula P = A e. T4, where is Stefan Boltzmann's constant (5.67x10⁸W/m/2K4), P is power, A is surface area, e is emissivity, and A is surface area.

We can deduct from the previous query that P1 = 10 watts and P2 = 100 watts.

The temperature ratio is T14/T24 = P1/P2 according to the black body radiation formula, which means that T2 = (T1*10⁴)/4

T2=T1 x 100²⁵.

As a result, the filament's internal temperature is altered by a factor of 10²⁵.

Learn more about temperature here-

https://brainly.com/question/11464844

#SPJ4

A Master Cylinder with an internal leak can have all of the following symptoms except: D. pedal regains firmness after being released and repressed.

A braking system can be defined as a mechanical system which comprises various components that are designed and developed to bring an automobile vehicle in motion to a stop, when applied by a driver.

In order for a technician to diagnose a brake system, the following symptoms should be adequately and appropriately checked and used by the technician:

Generally speaking, a Master Cylinder is an important component of an automobile vehicle's braking system which is designed and developed to transform (convert) mechanical pressure generated by the brake pedal into hydraulic pressure.

In Automobile engineering, a Master Cylinder with an internal leak can have all of the following symptoms:

Read more on braking system and Master Cylinder here: https://brainly.com/question/14237448

#SPJ1

Answer:

modulus =3.97X10^6 Ib/in^2, Poisson's ratio = 0.048

Explanation:

Since  Charles performed an investigation in his classroom in which he measured the freezing point of 250 mL of water, the type of investigation that Charles perform is known as option C:  laboratory experiment.

The term Laboratory experiments is known to be a term that connote any for of research method  which is one where researchers are known to make controllable environments so that they can be able to test hypotheses.

Note that Laboratories are known to be used for academic research such as rooms or specifically set up spaces.

Therefore, based on the above, one can say that since  Charles performed an investigation in his classroom in which he measured the freezing point of 250 mL of water, the type of investigation that Charles perform is known as option C:  laboratory experiment.

Learn more about experiment from

https://brainly.com/question/17274244
#SPJ1

Charles knows that adding salt to water causes the freezing point of water to be lowered, but he wants to know if rock salt affects the freezing point more than table salt. Charles performed an investigation in his classroom in which he measured the freezing point of 250 mL of water. He used this measurement as his control. Then, he dissolved equal amounts of rock salt and table salt in two identical 250 mL beakers of water. Finally, he measured the freezing points of each beaker of water, analyzed his results, and formed a conclusion. What type of investigation did Charles perform? A. observational field study B. collection of specimens C. laboratory experiment D. model-building

A brake-by-wire technology, according to Tech A, applies individual braking units to each wheel.

There are three different types of brake-by-wire technologies being used in the automotive industry to advance braking systems: electro-hydraulic, entirely electric, and a hybrid of the two. A brake booster is not required thanks to the electro-hydraulic system. Although there aren't any entirely drive-by-wire production cars yet, several car makers have created concept cars that satisfy the bill. To put it another way, a drive-by-wire system uses an electrical signal to instruct the engine on how much power to produce. The latter (drive-by-cable) still transmits data from the accelerator pedal to the engine through a mechanical cable.

Learn more about braking here-

https://brainly.com/question/19755465

#SPJ4

Summary:

Ergonomics can be used to improve a student’s ability to focus on learning for say, when writing a long essay. Ergonomics helps with keeping the wrists comfortable with an ergonomic writing utensil and not straining the back with a comfortable sitting position. It helps with eye strain, keeping students at a comfortable distance from the board. And it reduces distractions to improve focus.

Longer version:

Sitting posture is a very important ergonomic factor which could influence a student's focus. Bad sitting posture could be caused by the height of chair and the desk position. Bad sitting posture often affects a child's level of attention or focus. Hence, choosing a an appropriate table and chair combination for different height measures should be considered. The distance between students and the lecture board should be considered as students have varying preferences. Hence, taking note of a comfortable distance for each student is an important concept. The removal of distractive elements in the classroom environment is also an ergonomic concept which could improve focus. Therefore, the concept of ergonomics applied in classroom environment could help improve student's focus.

Answer: Comfortable Furniture, Lighting, Reduced Noise, Correct Posture.

Explanation:

In My opion Ergonomics can be used significantly in the classroom environment to improve a student's ability to focus on learning in the following ways;

Comfortable furniture: By providing comfortable furniture such as desks, chairs, and tables, the students will be able to focus on learning for a more extended period.

Lighting: Adequate lighting in the classroom is essential for students as it can prevent eye strain and headaches.

Reduced noise: An environment with reduced noise will help students concentrate better on their studies.

Correct posture: Ergonomics can be used to promote the right posture among students while studying. Poor posture can cause health issues such as backaches and neck pain, which can negatively affect a student's ability to focus on learning.

In conclusion, ergonomics can significantly improve a student's ability to focus on learning by providing comfortable furniture, adequate lighting, reduced noise, and promoting correct posture.

In scientific notation, a number x between 0 and 10 times a power of 10⁻ i.e., x10ⁿ⁻is produced by the calculator. For example, 53476 is represented as 5.3476*10⁴. This is often given by the calculator as 5.3476*E⁴

It is comparable to engineering notation. In this case, x is in the range of 0 to 1000, and the exponent n is the biggest multiple of 3 such that 10ⁿ is less than the integer. As a result, the responses are in the form x10ⁿ. For example, 53.476*10³ is used to symbolize the number. This makes it easy to add prefixes like micro, mili, mega, or kilo in front of the unit right away. The significand has exactly one digit before the decimal point in scientific notation. Therefore, 1.34 must be the significand. As a result, the exponent is 10⁵

Learn more about scientific notation here-

https://brainly.com/question/18073768

#SPJ4

Answer:

heat engines

Explanation:

These devices are called heat engines. For example, in a steam engine, pistons remove some thermal energy from hot gases. The steam engine then uses these moving pistons to power whatever it is hooked up to, thus converting thermal energy into kinetic energy.

Hope this helped and have a good day

The plunger or lever is the device that pushes the starter pinion gear into mesh with the ring gear when the ignition switch is in the start position.

The pinion is a special gear and spring assembly. The gear is extended into the gearbox case and engaged with the flywheel after the starter is turned on. In order to start the combustion process, the engine spins.

Before turning to start the engine, the pinion engages with the ring gear. A free wheel clutch prevents the pre-engaged starter motor from overspeeding when the engine accelerates.

Therefore, the plunger or lever is the device that pushes the starter pinion gear into mesh with the ring gear when the ignition switch is in the start position.

Learn more about pinion on:

https://brainly.com/question/13701362

#SPJ1

Answer:

motor

Explanation:

Most motors use electromagnets to cause mechanical rotation, which can do work.

the torque is required to rotate the inner cylinder at 12 r min, the outer cylinder remaining stationary is 11.0807 N-m.

we have left out some other important details, such as the time required to reach that rpm, whether the beginning state is at rest, and the axis around which the cylinder is revolving. However, we'll suppose that it will be 60 seconds (time is necessary to convert rpm to angular acceleration)

rotation around the center axis

Angular acceleration = torque + MOI

Currently, angular acceleration equals 2 rpm/(t 60).

In order to avoid getting an extremely high figure, we estimated that the diameter of the cylinder was 600 mm rather than 600 meters: angular acceleration= 1.047 rad/s² MOI for cylinder across center dia= 1/4MR²+ 1/12ML²

MOI= 10.5833 kg-m

Now, the product of these two is torque.

11.0807 N-m of torque

Various MOI equations can be used to compute for different axes of rotation.

Learn more about Acceleration here-

https://brainly.com/question/12550364

#SPJ4

The complete question is:

Crude oil at 20 c fills the space between two concentric cylinders 250 mm high and with diameters of 150 mm and 156 mm. Find the torque is required to rotate the inner cylinder at 12 r min, the outer cylinder remaining stationary.

Those that harden under strain, such as the aluminum-magnesium alloys used in beverage cans and the copper-zinc alloy, brass, used for cartridges, which show more strain hardening than pure copper or aluminum, respectively.

When a material is deformed under a substantial amount of strain, strain hardening is seen as a strengthening process. Lamellar crystals and chain molecule orientation on a vast scale are the culprits. When plastic materials are stretched past their yield point, this phenomena is frequently seen. When a metal is stretched past its yield point, strain hardening occurs. The metal appears to get stronger and harder to deform as more stress is needed to cause additional plastic deformation. Strain hardening is directly related to fatigue.

Learn more about strain hardening here-

https://brainly.com/question/15058191

#SPJ4