2. Calculate the wavelength of the emitted photon from hydrogen for the transition from ni = 3 to nf = 2. What part of the visible spectrum is this wavelength? Visible wavelengths are: Red  700 - 620 nm, Yellow  620 - 560 nm, Green  560 - 500 nm, Blue 500 - 440 nm, and Violet  440 - 400 nm.

Answer:

Transition temperature is the temperature at which a substance changes from one state to another.

Allotropy is the existence of an element in many forms.

Answer:

1.37L

Explanation:

V2=v1×T2

______

T1

Answer: The mass of [tex]PH_3[/tex] produced is 45.22 g

Explanation:

Limiting reagent is defined as the reagent which is completely consumed in the reaction and limits the formation of the product.

Excess reagent is defined as the reagent which is left behind after the completion of the reaction.

The number of moles is defined as the ratio of the mass of a substance to its molar mass. The equation used is:

[tex]\text{Number of moles}=\frac{\text{Given mass}}{\text{Molar mass}}[/tex] ......(1)

Given mass of [tex]P_4[/tex] = 62.0 g

Molar mass of [tex]P_4[/tex] = 124 g/mol

Putting values in equation 1, we get:

[tex]\text{Moles of }P_4=\frac{62.0g}{124g/mol}=0.516mol[/tex]

Given mass of [tex]H_2[/tex] = 4.00 g

Molar mass of [tex]H_2[/tex] = 2 g/mol

Putting values in equation 1, we get:

[tex]\text{Moles of }H_2=\frac{4.0g}{2g/mol}=2mol[/tex]

The chemical equation follows:

[tex]P_4(g)+6H_2(g)\rightarrow 4PH_3(g)[/tex]

By stoichiometry of the reaction:

If 6 moles of hydrogen gas reacts with 1 mole of [tex]P_4[/tex]

So, 2 moles of hydrogen gas will react with = [tex]\frac{1}{6}\times 2=0.333mol[/tex] of [tex]P_4[/tex]

As the given amount of [tex]P_4[/tex] is more than the required amount. Thus, it is present in excess and is considered as an excess reagent.

Thus, hydrogen gas is considered a limiting reagent because it limits the formation of the product.

By the stoichiometry of the reaction:

If 6 moles of [tex]H_2[/tex] produces 4 mole of [tex]PH_3[/tex]

So, 2 moles of [tex]H_2[/tex] will produce = [tex]\frac{4}{6}\times 2=1.33mol[/tex] of [tex]PH_3[/tex]

We know, molar mass of [tex]PH_3[/tex] = 34 g/mol

Putting values in equation 1, we get:

[tex]\text{Mass of }PH_3=(1.33mol\times 34g/mol)=45.22g[/tex]

Hence, the mass of [tex]PH_3[/tex] produced is 45.22 g

Answer:

Hence the solids that should test to investigate the effects of cations on pH is

[tex]AlBr_{3}[/tex] (Cation is Al 3+)  

[tex]MgCl_{2}[/tex]  ( Cation is Mg 2+)  

[tex]CH_{3} NH_{3} Br[/tex] ( Cation is NH2+).

Explanation:

The solids in the following should you test to investigate the effects of cations on pH.  

[tex]AlBr_{3}[/tex] contains (Cation is Al 3+)  

[tex]MgCl_{2}[/tex] contains ( Cation is Mg 2+)  

[tex]CH_{3} NH_{3} Br[/tex] contains( Cation is NH2+ )

The atoms or the molecules containing the positive charge that gets attracted to the cathode are called cations. The compounds a. [tex]\rm AlBr_{3}[/tex], c. [tex]\rm MgCl_{2}[/tex] and e. [tex]\rm CH_{3}NH_{3}Br[/tex] should be investigated.

Cations are the positive charge containing molecules and atoms that have more protons in their nucleus than the number of electrons in their shells. They are formed when they lose one or more electrons to another atom.

The addition or release of the electrons of the cations and anions affects the pH system as absorption of the cation decreases the pH and absorption of the anions increases the pH.

Hence, [tex]\rm Al^{3+}[/tex], [tex]\rm Mg^{2+}[/tex] and [tex]\rm NH^{2+}[/tex] are the cation that should be investigated. The addition of the cations will reduce the pH of the reaction.

Therefore, absorption of the cation reduces the pH.

Learn more about cations and pH here:

https://brainly.com/question/13800672

2.8 g is the minimum mass of HCl in grams that would you need to dissolve a 2.2 g iron bar on a padlock.

When a solute is dissolved in a solvent, a solution is created. Dissolution is the process through which solutes, or dissolved parts, combine to form a solution inside a solvent. In this procedure, the gas, liquid, or solid dissolves inside the original solvent and forms a solution.

In some polymer applications, dissolution is also an issue since it results in swelling, a loss of strength and stiffness, and a change in volume. Whether a chemical process is man-made or natural, dissolution is crucial. Catalysts are tested using dissolution. 2.8 g is the minimum mass of HCl in grams that would you need to dissolve a 2.2 g iron bar on a padlock.

Therefore, 2.8 g is the minimum mass of HCl in grams that would you need to dissolve a 2.2 g iron bar on a padlock.

To know more about dissolution, here:

https://brainly.com/question/23851972

#SPJ2

Answer:

2.0202 grams

Explanation:

1.4% (m/v) glucose solution means: 1.4g glucose/100mL solution.

so ?g glucose = 144.3 mL soln

Now apply the conversion factor, and you have:

?g glucose = 144.3mL soln x (1.4g glucose/100mL soln).

so you have (144.3x1.4/100) g glucose= 2.0202 grams

Answer:

+3

Explanation:

u see sum of oxidation number in all situations have to be 0

ClO2 =-1

so Fe is +3

Answer:

362g

Explanation:

heat lost by metal= heat gained by acetic acid

tfs are the same so you cando delta T

convert Cal/gc to J/gc

thectgod ig follow

Answer: The mass of copper (II) nitrate produced is 105.04 g.

Explanation:

The number of moles is defined as the ratio of the mass of a substance to its molar mass. The equation used is:

[tex]\text{Number of moles}=\frac{\text{Given mass}}{\text{Molar mass}}[/tex] ......(1)

Given mass of copper = 35.5 g

Molar mass of copper = 63.5 g/mol

Plugging values in equation 1:

[tex]\text{Moles of copper}=\frac{35.5g}{63.5g/mol}=0.560 mol[/tex]

The given chemical equation follows:

[tex]3Cu(s)+8HNO_3(aq)\rightarrow 3Cu(NO_3)_2(aq)+2NO(g)+4H_2O(l)[/tex]

By the stoichiometry of the reaction:

If 3 moles of copper produces 3 moles of copper (II) nitrate

So, 0.560 moles of copper will produce = [tex]\frac{3}{3}\times 0.560=0.560mol[/tex] of copper (II) nitrate

Molar mass of copper (II) nitrate = 187.56 g/mol

Plugging values in equation 1:

[tex]\text{Mass of copper (II) nitrate}=(0.560mol\times 187.56g/mol)=105.04g[/tex]

Hence, the mass of copper (II) nitrate produced is 105.04 g.

Answer:  hello the complete question is attached below

Visibility of molecular ion = m/z value of 77

Explanation:

For The molecular ion to be visible, it has to be at an m/z value of 77 and this is because molecular ions will have an m/z ratio =  molecular mass of given molecule in most cases but not always in all cases.

And the visibility is possible after the removal of CH₃ ion.

ii) Evidence in the mass spectrum that suggests peak at m/z = 77

attached below

the effects are: temperature rises, water shortages, and increased fire threats

Answer:

7 mol CuO

0.5 mol O₂

Explanation:

Step 1: Write the balanced equation

2 Cu + O₂ ⇒ 2 CuO

Step 2: Identify the limiting reactant

The theoretical molar ratio (TMR) of Cu to O₂ is 2:1.

The experimental molar ratio (EMR) of Cu to O₂ is 7:4 = 1.75:1.

Since TMR > EMR, Cu is the limiting reactant

Step 3: Calculate the amount of CuO produced

7 mol Cu × 2 mol CuO/2 mol Cu = 7 mol CuO

Step 4: Calculate the excess of O₂ that remains

The amount of O₂ that reacts is:

7 mol Cu × 1 mol O₂/2 mol Cu = 3.5 mol O₂

The excess of O₂ that remains is:

4 mol - 3.5 mol = 0.5 mol

Explanation:

The given data is:

The half-life of gentamicin is 1.5 hrs.

The reaction follows first-order kinetics.

The initial concentration of the reactants is 8.4 x 10-5 M.

The concentration of reactant after 8 hrs can be calculated as shown below:

The formula of the half-life of the first-order reaction is:

[tex]k=\frac{0.693}{t_1_/_2}[/tex]

Where k = rate constant

t1/2=half-life

So, the rate constant k value is:

[tex]k=\frac{0.693}{1.5 hrs}[/tex]

The expression for the rate constant is :

[tex]k=\frac{2.303}{t} log \frac{initial concentration}{concentration after time "t"}[/tex]

Substitute the given values and the k value in this formula to get the concentration of the reactant after time 8 hrs is shown below:

[tex]\frac{0.693}{1.5 hrs} =\frac{2.303}{8 hrs} x log \frac{8.4x10^-^5}{y} \\ log \frac{8.4x10^-^5}{y} =1.604\\\frac{8.4x10^-^5}{y}=10^1^.^6^0^4\\\frac{8.4x10^-^5}{y}=40.18\\y=\frac{8.4x10^-^5}{40.18} \\=>y=2.09x10^-^6[/tex]

Answer: The concentration of reactant remains after 8 hours is 2.09x10^-6M.

Answer:

K+ClKCl

Explanation:

because the reaction is between metal Potassium and Non-metal Chlorine

Answer:

Explanation:

a) It is a redox reaction because KCl is an ionic compounds with K having a + charge and Cl having a - charge. Originally, both have an oxidation state of 0 and not K has 1+ and Cl has 1-. Therefore, one species was oxidized and one was reduced which is indicative of a redox reactions.

b)

2K + Cl2 => 2KCl

Best practices for fume hoods: work 25 cm inside, organize items to one side, use raised ledge; avoid open sash and quick movements.

Laboratory fume hoods must be used safely. Workers should operate at least 25 cm within the hood to preserve ventilation and avoid dangerous chemicals. Place things on one side of the hood to preserve ventilation and prevent clogging.

A raised ledge on the rear of the hood prevents things from falling in and impeding airflow. Avoid fully opening the sash to maintain ventilation and containment. Fast, rapid motions can interrupt airflow, so prevent them. These practises guarantee the fume hood contains harmful compounds, making the lab safer. Therefore, option (B), (D) and (E) are correct.

Learn more about fume hood, here:

https://brainly.com/question/29069541

#SPJ12

Answer:

[tex]{ \bf{HI _{(aq)} \: → \: H {}^{ + } _{(aq)} \: + \: \: I {}^{ - } _{(aq)} }}[/tex]

Answer:

[tex]m_{H_2O}=12.9gH_2O[/tex]

Explanation:

Hey there!

In this case, according to the given information, it turns out possible for us to solve this problem by firstly writing out the reaction whereby butane is combusted in the presence of excess oxygen:

[tex]2C_4H_{10}+13O_2\rightarrow 8CO_2+10H_2O[/tex]

Thus, we can evidence a 2:10 mole ratio of butane to water, and thus, the stoichiometric setup to calculate the mass of produced water is:

[tex]m_{H_2O}=7.49gC_4H_{10}*\frac{1molC_4H_{10}}{52.12gC_4H_{10}} *\frac{10molH_2O}{2molC_4H_{10}}*\frac{18.02gH_2O}{1molH_2O}\\\\m_{H_2O}=12.9gH_2O[/tex]

Regards!

Answer:

d. End product is that product with a ketone and carboxylic acid.

Explanation:

[tex]{ \sf{NaBH_{4} : }}[/tex]

Sodium borohydride is a reducing agent, it reduces the ketone to a primary alcohol.

[tex]{ \sf{H _{2} O \: and \: H {}^{ + } }}[/tex]

Then acidified water is an oxidising mixture which reverses the reduction reaction.

Explanation:

Option D is your answer

Hope it helps

Answer:

D. Propanol

Explanation:

C3H7OH the presence of alcohol functional group makes it propanol

Answer:

89.04 g of NaNO₃.

Explanation:

We'll begin by converting 838 mL to L. This can be obtained as follow:

1000 mL = 1 L

Therefore,

838 mL = 838 mL × 1 L / 1000 mL

838 mL = 0.838 L

Next, we shall determine the number of mole of NaNO₃ in the solution. This can be obtained as follow:

Volume = 0.838 L

Molarity = 1.25 M

Mole of NaNO₃ =?

Mole = Molarity × volume

Mole of NaNO₃ = 1.25 × 0.838

Mole of NaNO₃ = 1.0475 mole

Finally, we shall determine the mass of NaNO₃ needed to prepare the solution. This can be obtained as follow:

Mole of NaNO₃ = 1.0475 mole

Molar mass of NaNO₃ = 23 + 14 + (16×3)

= 23 + 14 + 48

= 85 g/mol

Mass of NaNO₃ =?

Mass = mole × molar mass

Mass of NaNO₃ = 1.0475 × 85

Mass of NaNO₃ = 89.04 g

Therefore, 89.04 g of NaNO₃ is needed to prepare the solution.

Answer:

solid to gaseous or gaseous to solid

Explanation:

Sublimation is the transition of a substance directly from the solid to the gas state, without passing through the liquid state. sublimation is most often used to describe the process of snow and ice changing into water vapor in the air without first melting into water.

Explanation:

The balanced chemical equation of the reaction is:

[tex]C_3H_8(g)+ 5O_2 (g)->3CO_2(g)+4H_2O(g)[/tex]

From the balanced chemical equation,

1 mole of propane forms ------ 3 mol. of [tex]CO_2[/tex] gas.

The molar mass of propane is 44.1 g/mol.

One mole of any gas at STP occupies --- 22.4 L.

Hence, 44 g of propane forms (3x22.4 L=) 67.2 L of CO2 gas at STP.

Answer:

Thus, 67.2 L of CO2 is formed at STP.

Answer:

[ICl] = 0.0420 M

[I₂]  = [Cl₂] = 0.0140 M

Explanation:

Step 1: Calculate the initial concentration of ICl

[ICl] = 0.350 mol / 5.00 L = 0.0700 M

Step 2: Make an ICE chart

        2 ICl(g) ⇄ I₂(g) + Cl₂(g)

I        0.0700     0         0

C        -2x          +x        +x

E    0.0700-2x      x          x

The concentration equilibrium constant (Kc) is:

Kc = 0.110 = [I₂] [Cl₂] / [ICl]² = x² / (0.0700-2x)² = (x/0.0700-2x)²

0.332 = x/0.0700-2x

x = 0.0140

The concentrations at equilbrium are:

[ICl] = 0.0700-2x = 0.0700-0.0280 = 0.0420 M

[I₂]  = [Cl₂] = x = 0.0140 M

Answer:

3

Explanation:

The electron shells are labelled as K,L,M,N,O,P, and Q or 1,2,3,4,5,6, and 7.

As we go from innermost shell outwards, this number denotes the number of subshell in the shell. Electrons in outer shells have higher average energy and travel farther from the nucleus than those in inner shells.

Hence, M shell contains s,p and d subshells.

Answer:

Sodium dihydrogenphosphate = NaH₂PO₄

Sodium monohydrogenphosphate = Na₂HPO₄

Explanation:

A buffer solution is a solution is a solution that resists changes to its oH when a little quantity of strong acid or strong base is added to it.

They are solutions of weak acids or weak bases and their salts known as conjugate base or conjugate acids respectively for the weak acids and weak bases.

For example, a solution of the weak acid ethanoic acid and its salt or conjugate base, sodium ethanoate serves as a buffer solution.

In biochemical experiments, where the pH of the reaction medium is kept as constant and as close as possible to that of the internal environment, buffer solutions are widely used. One of the commonly used buffers is the phosphate buffer. The phosphate buffer consists of the acid salts sodium dihydrogenphosphate and sodium monohydrogenphosphate. Sodium dihydrogenphosphate serves as the weak acid while sodium monohydrogenphosphate serves as the conjugate base.

The formulas of these two compounds are given below:

Sodium dihydrogenphosphate = NaH₂PO₄

Sodium monohydrogenphosphate = Na₂HPO₄

Answer:

False

Explanation:

Answer:

False

Explanation:

Answer:

the answer should be B because elements do not tranform into other elements in a chemical reaction

am I right please?

Answer:

Conversion of 2-methyl-2-butene into a secondary alkyl halide - ROOR, HBr

Conversion of 2-methyl-2-butene into a tertiary alkyl halide - HBr

Explanation:

The addition of HBr to 2-methyl-2-butene occurs in accordance to Markovnikov rule in the absence of peroxide.

According to Markovnikov rule; ''the negative part of the addendum is attached to the carbon atom bearing the least number of hydrogen atoms.'' Following the Markovnikov rule, the tertiary alkyl halide is obtained.

In the presence of peroxide, this rule is not followed and the reaction proceeds in an anti-Markovnikov way to yield a secondary alkyl halide.

The number of replaceable electrons in an atom is called its valency.

Examples

Thanks !

☺️☺️☺️☺️☺️☺️☺️

Answer:

the combining capacity if an atom is know as valency.

the property of an element that determines the number of other atimd with an aton if the element can combine.