Which of these challenges is unique to the process of designing prostheses as opposed to engineering other technologies?
- Knowing how a material will fail
- Using the engineering process
- Identifying a need for the technology
- Predicting how a technology will interact with human tissue
Answer:
predicting how a tech will interact with human tissue.
Explanation:
thats not really common except for in the medical field.
The challenge that is unique to the process of designing prostheses as opposed to engineering other technologies is Predicting how a technology will interact with human tissue. The correct option is option 4.
What is Prosthetic Design?Prosthesis design is typically undertaken by shaping wax on a plaster replica of the patient's anatomy. Realism is predominantly achieved through the prosthetist's ability to interpret the correct location and physically recreate the anatomical shape and detail.
Prosthetic applications are an example of the intersection of design, technology and science.
Therefore, The challenge that is unique to the process of designing prostheses as opposed to engineering other technologies is Predicting how a technology will interact with human tissue. The correct option is option 4.
Learn more about Prosthetic Design, here:
https://brainly.com/question/20548709
#SPJ3
How do molecules work?
A molecule is essentially created by a collection of atoms linked by a network of bonds.
Calculate the mass of diphosphorus pentoxide (P,05) that contains a trillion (1.000 x 10^2) phosphorus atoms. Be sure your answer has a unit symbol if necessary, and round it to 4 significant digits.
Answer: The answer is 94.25 × 10¯¹² g.
°ω° Which statement best describes the skier? The skier has potential and kinetic energy. The skier has only potential energy. The skier has only kinetic energy. The skier does not have potential or kinetic energy. °ω°
What physical property does salt have when it is dissolved in water?
And
What type of mixture is salt water?
What is the interaction between atmosphere and biosphere
Answer:
Biosphere-Atmosphere Interactions focuses on the sources and sinks of greenhouse gases (GHGs), air pollutants, particulate matter, water, and energy between the Earth's surface and the atmosphere.
Explanation:
What is the pressure exerted by a force of 15.0 N over an area of 0.00372 m^2 ?
Explanation:
Pressure = Force/Area
therefore,
P = 15/0.00372
= 4.03 X10^³N/m²
A car goes from 0 to 100m/s in 10s what is that acceleration
Answer:
10m\s
Explanation:
given
initial velocity(u)=0
final velocity (v)=100
acceleration(a)=?
we know,
acceleration = v-u/t
= 100-0\10
= 10 m\s
Anyone mind answering this
convert 3.79 x 10^24 atoms of sodium to grams
mol = 3.79 × 10^24/6.02 × 10^23 = 6.296 mol
mass = 6.296 × 23 = 144.808 grams
Write a paragraph on "lipids as pigments".
is the effect of hot and cold water on acid different?
Answer:
When the acid is mixed with the water, an immediate chemical reaction takes place. The formation of carbon dioxide causes breakdown of the sample into finer particles.
The heat in the Stomach rises up, causing esophageal reflux, chronic sinusitis, headaches, eye disorders and problems with the teeth. Furthermore, ingesting cold water creates moisture or “dampness.” Bacteria, candida, and parasites thrive in damp areas, especially in your stomach and uterus.
The Universal Space Agency wants to know the results of your Sim investigation. Write your report to the lead chemist, explaining why drops of liquid water appeared on the outside of the cold, but not the warm, soda can. Use evidence from your investigation in your explanation.
Answer:
due to warm temperature
Explanation:
Explanation:
There is water present in liquid form instead of liquid nitrogen on the outer side of the can because of the temperature present in the surrounding environment. The temperature around the can is little warm which is favourable for the water but not for the liquid nitrogen. The liquid nitrogen present in liquid state when the temperature of the surrounding is too cold. if it is warm, the liquid nitrogen starts boiling and converts into gaseous state so that's why the warmer temperature is responsible for the presence of water not the liquid nitrogen.
PLEASE HELP 100 POINTS
identify the type of chemical reaction:
C6H12 + 9 O2 ---> 6 CO2 + 2 H2O
Answer:
Hexenes + Dioxygen = Carbon Dioxide + Water
The reaction type is combustion.
Its reactants are Hexenes - C6H12 and Dioxygen - O2
its products are Carbon Dioxide - CO2 and Water - H2O
Explanation: This was my yesterdays class
what is the name of CrO2?
Please answer!!
No links.
Picture is included
The graph below displays the temperature and volume of a sample of a gas. What does the graph show.
A. The volume and temperature of the gas are not related
B. As the pressure of a gas increases its volume decreases
C. If the temperature of a gas doubles then its volume will also double
D. As the volume of the gas increases its temperature decreases
C. If the temperature of a gas doubles then its volume will also double.
If the heat is added to an endothermic system, at equilibrium, the system will move to the _________ to regain equilibrium.
Answer:
At equilibrium, the system will move to the right to regain equilibrium
To balance a redox reaction, what must be done?
The ion charge on both sides of the equation must equal zero.
Water must be added to both sides of the equation.
The increase and decrease in oxidation numbers must be balanced.
H+ and OH− must be added to opposite sides of the equation.
To balance a redox reaction, the increase and decrease in oxidation numbers must be balanced.
A redox reaction also called an oxidation- reduction reaction is a chemical reaction in which there is simultaneous gain and loss of electrons.
The species that loses electrons gets oxidized while the species that gains electrons gets reduced. This results in a change of oxidation number. The species that gets reduced decreases in oxidation number and the species that gets oxidized increases in oxidation number.
So, to balance a redox reaction, the simultaneous gain and loss of electrons must be balanced.
Thus, to balance a redox reaction, the increase and decrease in oxidation numbers must be balanced.
Learn more about redox reaction here:
https://brainly.com/question/15339159
Oxygen gas is at temperature of 40c when it occupies a volume of 2.3 liters. To what temperature should it be raised to occupy a volume of 6.5 liters?
Answer:
884.6k
Explanation:
Ensure you write the states of the reactants and products.
• phosphoric acid reacts with magnesium hydroxide
17) An ethanol solution has a concentration of 0.500M. What volume in liters of this solution
would contain 8.0 moles of ethanol?
To calculate the Molar Concentration, we will find the molar concentration by dividing the moles by liters of water used in the solution. For example, the acetic acid here is completely dissolved in 1.25 L of water. Then divide 0.1665 moles by 1.25 L to get the molar concentration, which will be 0.1332 M.
Hope It Helpz(◕ᴥ◕)How many atoms of lead are present in 78.40 grams of lead?
mole = 78.40/207.2
= 0.379 mol
1 mol = 6.02 × 10^23 atoms
0.379 mol = X
X = 0.379/1 × 6.02 × 10^23
= 6.296 × 10^-25 atoms
why brain remembers picture better than words?
Answer:
your brain processes ever detail in a picture rather than words for for example a picture of something words doesn't describe it as well as the picture could.
The boiling point of a liquid is tested at 10 different pressures, from 0.5 to 1.4 atmospheres. The results of the tests show that
there is a nearly constant increase in boiling point for each increase in pressure. Which conclusion is reasonable based on this
information? (1 point)
O A boiling point at 1.5 atmospheres could not be predicted with any certainty at all.
O A boiling point at 15 atmospheres could not be predicted with any certainty at all.
O A boiling point at 1.5 atmospheres could be predicted fairly well.
O A boiling point at 15 atmospheres could be predicted fairly well.
Since the increase in boiling point with increasing pressure is fairly constant, then, the boiling point at 1.5 atmospheres could be predicted fairly well.
We say that a substance has reached its boiling point when its pressure equals the atmospheric pressure. Recall that we can be able to make predictions from the results of an experiment.
In this case, we are told that there is a nearly constant increase in boiling point for each increase in pressure. Therefore, it is reasonable to conclude that, a boiling point at 1.5 atmospheres could be predicted fairly well.
Learn more: https://brainly.com/question/6284546
A solution that contains 3 grams of solute dissolved in 100 millimeters of solution is:
a) 3% m / m
b) 3% m / v
c) 10% m / v
Answer:
the answer is correct part another is a part
Explanation:
c part
How many moles are contained in 127 grams of lead?
Answer:
18.015
Explanation:
In the urea molecule, (NH2)2CO, both nitrogen atoms are bonded to the carbon atom. Each nitrogen atom has a lone pair. The molecular geometry is
Answer:
There are two -NH2 groups around the C=O. bond in the urea molecule structure. There are one lone pairs on each nitrogen atoms and two lone pairs on oxygen atom.
The molecule urea that the molecular geometry of the nitrogen atoms is tetrahedral.
What is molecular geometry?The term molecular geometry has to do with the arrangement of atoms around the central atom. On this case, we are looking at the arrangement of atoms around nitrogen.
We can see from the molecule urea that the molecular geometry of the nitrogen atoms is tetrahedral.
Learn more about urea:https://brainly.com/question/21133305
#SPJ2
A gas sample occupies 8.76 L at a temperature of 37°C. What is
the volume if the temperature is lowered to 0°C at constant
pressure?
Answer:
A.
Explanation:
Why do scientists use the scientific method?
A. It helps them do research that other scientists can understand.
B. It helps them ask questions that affect as many people as
possible.
C. It helps them make sure a certain question has not been asked
before.
OD. It helps them determine whether an idea is supported by evidence.
Help
Answer:
DExplanation:
It helps determine whether an idea is supported by evidencehope it helps please follow because I don't have any followers I have 0 followersExplain in terms of chemical reactivity why the elements in group 18 on the modern periodic table were not identified by Mendeleev's at that time
Answer:
elements tend not to react with other elements, there were no oxide compounds for Mendeleev to study. –Group 18 elements are generally unreactive. sodium ion is smaller because the sodium atom lost one electron. –An Na+ ion is smaller because it has one fewer electron shell.
Explanation:
can you me as brainliest if its right? i just need a few more to rank up! ^-^
Also have a great day and good luck in your studies!
