The net ionic equations for the reactions of Group III hydroxides with NaOH, potassium chromate and barium chloride, nickel(II) nitrate and excess NH₃, and Al(OH)₃ in aqueous nitric acid are shown.
Spectator ions are excluded from the net ionic equations, which show only the species that undergo a chemical change.
a) Formation of insoluble hydroxides of Group III with NaOH:
Al(OH)₃(s) + NaOH(aq) → Al(OH)₄⁻(aq) + Na⁺(aq)
Fe(OH)₃(s) + NaOH(aq) → Fe(OH)₄⁻(aq) + Na⁺(aq)
b) Precipitate formation with potassium chromate and barium chloride:
BaCl₂(aq) + K₂CrO₄(aq) → BaCrO₄(s) + 2KCl(aq)
c) Formation of deep blue color with nickel(II) nitrate and excess NH₃:
Ni(NO₃)₂(aq) + 6NH₃(aq) → [Ni(NH₃)₆]²⁺(aq) + 2NO₃⁻(aq)
d) Dissolving Al(OH)₃ in aqueous nitric acid:
Al(OH)₃(s) + 3HNO₃(aq) → Al(NO₃)₃(aq) + 3H₂O(l)
Note: In net ionic equations, spectator ions (ions that do not participate in the reaction) are excluded. The net ionic equations show only the species that undergo a chemical change.
To know more about net ionic equations refer here :
https://brainly.com/question/32721028#
#SPJ11
Hydroxide ion reacts with chloromethane in a single step according to the following equation: Identify the bonds broken and foed, and draw curved arrows to represent the flow of electrons during the reaction. 3.57 Methoxide ion (CH3O−)reacts with bromoethane in a single step according to the following equation: Identify the bonds broken and foed, and draw curved arrows to represent the flow of electrons during the reaction. 3.50 Describe the difference between a transition state and a reaction inteediate.
A transition state refers to a high-energy, short-lived species that exists at the maximum energy point along the reaction pathway. It represents the highest energy point during the conversion of reactants into products. On the other hand, a reaction intermediate is a relatively stable species that forms during the reaction but is not present in the initial reactants or final products.
A transition state is a fleeting arrangement of atoms where the bonds between the reacting species are partially broken and partially formed. It represents the transition from reactants to products and has a higher energy compared to both. In contrast, a reaction intermediate is a stable species formed at some point during the reaction, which can exist for a longer period. It may have partially formed bonds but is not the final product.
In summary, a transition state is a high-energy species occurring at the highest energy point of a reaction, while a reaction intermediate is a relatively stable species formed during the reaction but not present in the initial or final compounds. They represent different stages in a reaction's progress and play distinct roles in understanding reaction mechanisms.
To know more about A transition state click here:
https://brainly.com/question/32609879
#SPJ11
calculate the percent by mass of kbr in a saturated solution of kbr in water at 10 °c
To answer this question, we need more information.
To calculate the percent by mass of KBr in a saturated solution at 10 °C, we need to know the solubility of KBr at that temperature. The solubility of KBr in water varies with temperature. Without this information, we cannot provide an accurate calculation.
The solubility of KBr at 10 °C can be determined from experimental data or reference sources. Once the solubility is known, the percent by mass of KBr can be calculated using the formula:
Percent by mass of KBr = (mass of KBr / mass of solution) × 100
Where the mass of KBr is the mass of KBr dissolved in the given amount of water to form a saturated solution. The mass of the solution is the total mass of the solution, which includes the mass of both KBr and water.
Hope this helps.
9. CONCENTRATION OF DRUG: A drug is injected into a patient's bloodstream and t seconds later, the concentration of the drug is C grams per cubic centimeter (g/cm 3 ), where C(t)=0.2(1+3e −0.3t) What is the drug concentration after 10 seconds? What is the rate of change between 30 and 45 seconds (g/cm3/sec) How long does it take for the drug concentration to reach 0.24 g/cm 3?
It takes about 15.02 seconds for the drug concentration to reach 0.24 g/cm3.
Drug concentration after 10 seconds:
C(t)= 0.2(1 + 3e^-0.3t)
Given t = 10 seconds
C(10) = 0.2 (1 + 3e^-0.3*10)≈ 0.75 g/cm32.
Rate of change between 30 and 45 seconds (g/cm3/sec)
Rate of change of C with respect to t is given by d
C/dt = -0.18e^-0.3t
When t = 30,dC/dt = -0.18e^-0.3*30 = -0.0104 g/cm3/sec
When t = 45,dC/dt = -0.18e^-0.3*45 = -0.0015 g/cm3/sec3.
Time taken for drug concentration to reach 0.24 g/cm3
To find the time it takes for the drug concentration to reach 0.24 g/cm3,
we solve the equation C(t) = 0.24 g/cm3 for t.
C(t) = 0.2 (1 + 3e^-0.3t)0.24
= 0.2 (1 + 3e^-0.3t)1.2
= 1 + 3e^-0.3t0.2
= 3e^-0.3tln(0.2/3)
= -0.3tln(0.2) - ln(3)
= -0.3tln(3) + ln(0.2)
= 0.3tApproximately, t
≈ 15.02 seconds,
Learn more about Rate of change from the given link:
https://brainly.com/question/29181688
#SPJ11
If the gac in Problem 1.11 were initially at 330 K, what will he the final vo ume if the temperahire were raiced to 550 K at conctart pressure? Solutiou: Given: same gas as in problem 1.11: V1=0.300dm3 T1−330 K,T2=550 K (constant pressurc) Rcquirsd: V
The ideal gas equation is given by, PV=n RT Where, P is pressure V is volume is temperature is the number of moles R is the universal gas constant.
The number of moles can be written as, n = (mass of gas) / (molar mass of gas). The molar mass of the gas can be obtained from the periodic table.Let us substitute these values in the ideal gas equation and simplify. For a given mass of gas,[tex]P1V1/T1=P2V2/T2Let V1=0.300 dm³ , T1=330 K and T2=550 K .Therefore, P1V1/T1=P2V2/T2=> V2=[(P1V1T2)/(T1P2)]=[/tex][tex]> V2=[(1.01×10⁵×0.300×550)/(330×1.01×10⁵)]=> V2 = 0.455[/tex]dm³Hence, the final volume of the gas will be 0.455 dm³ when the increased from 330 K to 550 K at constant pressure.
The answer is expressed in a clear manner.
To know more about universal gas visit:
brainly.com/question/19577226
#SPJ11
Select the single best answer. Considering only electron density, will the following reaction occur? {HC} \equiv {CH}+\dddot{{OH}} →
As a result, the given reaction, {HC} ≡ {CH} + {OH} → does not occur due to incompatibility of reactants.
The reaction: {HC} ≡ {CH} + {OH}→ cannot occur due to the incompatibility of the two reactants. The hydroxyl radical is not stable and has a single unpaired electron in its outer shell, whereas the ethyne molecule has a triple bond between the two carbon atoms, resulting in a low electron density. Therefore, the reaction can be explained by the following two factors: Electron density The hydroxyl radical has a greater electron density than the ethyne molecule, resulting in an electron transfer from the hydroxyl radical to the ethyne molecule.
But the ethyne molecule lacks electron density to satisfy the unpaired electron in the hydroxyl radical, and the reaction is stopped. Bond dissociation energy The bond dissociation energy between the carbon-carbon triple bond and the carbon-hydrogen bond is high. As a result, the reaction is not possible because the hydroxyl radical does not provide enough energy to break these bonds. Moreover, The reaction between the hydroxyl radical and ethyne is endothermic and requires the absorption of energy from the surroundings to proceed.
To know more about electron visit:
https://brainly.com/question/12001116
#SPJ11
PLEASE ANSWER ASAPPPP
The impact of the subsequent mistakes made during titration on the estimated percent acidity:
1. The buret's tip wasn't entirely filled.
2. The flask leaked a small amount of the acid sample.
3. Compared to the actual molarity of the base, the M of the base solution utilized in the computation was lower.
The subsequent mistakes made during titration can have an impact on the estimated percent acidity. The impact can be influenced by factors such as
the filling of the buret's tipleakage in the flaskthe utilization of a lower molarity of the base solution in the computation.If the buret's tip isn't entirely filled, it can lead to an inaccurate volume measurement of the titrant added to the solution. This can result in an incorrect calculation of the acid's concentration and subsequently affect the estimated percent acidity.
If the flask used in the titration leaks a small amount of the acid sample, it can lead to a loss of the analyte. This loss can cause a decrease in the amount of acid reacted with the base, resulting in an underestimation of the acid's concentration and the estimated percent acidity.
3. Utilizing a lower molarity of the base solution in the computation compared to the actual molarity can result in an incorrect stoichiometric ratio between the acid and base. This will lead to an inaccurate determination of the acid's concentration and subsequently affect the estimated percent acidity.
Overall, these mistakes can introduce errors and inaccuracies in the titration process, affecting the estimation of percent acidity. It is crucial to minimize these mistakes and ensure proper technique and equipment usage during titration to obtain reliable and accurate results.
Learn more about Acidity
brainly.com/question/14072179
SPJ11
9. The 150 {mg} / {dl} standard for Glucose reads 0.50 Absorbance. The unknown absorbance is 0.85 . What is the Glucose concentration of the unknown sample?
The glucose concentration of the unknown sample is estimated to be 255 mg/dL based on the absorbance values of 0.50 (standard) and 0.85 (unknown) using the Beer-Lambert Law.
To calculate the glucose concentration of the unknown sample, we can use the Beer-Lambert Law and set up a proportion based on the absorbance values.
According to the Beer-Lambert Law, the absorbance (A) is directly proportional to the concentration (C) of a substance, multiplied by the path length (b) and the molar absorptivity (ε) of the substance.
Mathematically, it can be expressed as:
A = ε * C * b
Given that the standard absorbance (A1) is 0.50, the unknown absorbance (A2) is 0.85, and the glucose concentration of the standard (C1) is 150 mg/dL, we can set up the following proportion:
A1 / A2 = C1 / C2
Plugging in the values, we have:
0.50 / 0.85 = 150 mg/dL / C2
Simplifying the proportion, we can solve for C2 (glucose concentration of the unknown sample):
C2 = (0.85 * 150 mg/dL) / 0.50
C2 = 255 mg/dL
Therefore, the estimated glucose concentration of the unknown sample is 255 mg/dL.
To know more about glucose concentration click here:
https://brainly.com/question/3522894
#SPJ11
which of the following statements about tentsion pneumothorax is false? jdv occurs when the vena cava becomes crimped
The statement "jdv occurs when the vena cava becomes crimped" is false. Tension pneumothorax is not caused by vena cava crimping.
The statement "jdv occurs when the vena cava becomes crimped" is false.
Tension pneumothorax is a life-threatening condition that occurs when air accumulates in the pleural space surrounding the lungs, leading to increased pressure and subsequent collapse of the affected lung. This condition can be caused by trauma, lung diseases, medical procedures, or spontaneous pneumothorax.
The vena cava is a large vein that carries deoxygenated blood from the body back to the heart. It is not directly involved in the development of tension pneumothorax.
Instead, tension pneumothorax typically occurs when air enters the pleural space through an opening in the lung or chest wall and gets trapped, preventing it from escaping. As more air enters with each breath, pressure within the pleural space increases, compressing the lung and shifting the mediastinal structures.
If left untreated, tension pneumothorax can be fatal due to compromised cardiac function and reduced venous return to the heart.
The condition requires immediate medical attention, typically involving chest tube insertion or needle decompression to relieve the pressure and allow the lung to re-expand.
Learn more about Tension pneumothorax
brainly.com/question/31836652
#SPJ11
1. Which lines run north and south along the earth’s surface? Choose all that apply.
a. latitude lines b. longitude lines c. Equator d. Prime Meridian
2. Degrees of latitude and longitude can be divided into Choose all that apply.
a. hours b. minutes c. seconds d. days
3. Through which two continents does the 180th meridian pass? Circle two.
a. North America, b. South America, c. Antarctica, d. Africa, e. Asia.
1. The lines that run north and south along the earth’s surface are the latitude lines and longitude lines.
2. Degrees of latitude and longitude can be divided into hours, minutes, and seconds.
3. The 180th meridian passes through Asia and Antarctica.
1. Latitude lines and longitude lines are the two types of lines that run north and south along the earth’s surface.
Latitude lines: Latitude is a geographic coordinate that specifies the north-south position of a point on the Earth's surface. Latitude lines run from east to west and are parallel to the Equator. The equator is defined as 0 degrees latitude. The latitude increases to 90 degrees in both the north and south directions.
Longitude lines: Longitude is a geographic coordinate that specifies the east-west position of a point on the Earth's surface. Longitude lines run from north to south, and they are not parallel to each other. They meet at the poles and are widest at the equator. The Prime Meridian, which passes through Greenwich, England, is defined as 0 degrees longitude. The longitude increases to 180 degrees in both the east and west directions.
2. Degrees of latitude and longitude can be divided into hours, minutes, and seconds. Latitude and longitude are expressed in degrees, minutes, and seconds. A degree of latitude or longitude can be divided into 60 minutes, and each minute can be divided into 60 seconds.
3. The 180th meridian passes through Asia and Antarctica.
The International Date Line follows the 180th meridian for the most part. The International Date Line crosses the 180th meridian in the western Pacific Ocean, deviating to pass around some territories and island groups. The 180th meridian crosses the Arctic Ocean, Asia, the Pacific Ocean, the Southern Ocean, and Antarctica.
Learn more about The Prime Meridian: https://brainly.com/question/20573958
#SPJ11
a continuously reinforced concrete pavement cross-section contains a layer of no. 6 reinforcing bars at 6-inch centers, such that the steel is just above mid-depth of a 10-inch thick slab. cover over the top of the steel is therefore about 4 inches.
The concrete pavements has a layer of no. 6 reinforcing bars placed at 6-inch intervals, just above the center of a 10-inch thick slab, with about 4 inches of cover over the steel.
In a continuously reinforced concrete pavement cross-section, the primary purpose of the reinforcing bars is to control and distribute cracking caused by the tensile forces that develop in the concrete slab as a result of temperature changes and traffic loads. In this specific case, the cross-section contains no. 6 reinforcing bars, which refers to bars with a diameter of 0.75 inches.
These bars are spaced at 6-inch centers, meaning that the distance between the centers of adjacent bars is 6 inches. By positioning the steel just above mid-depth of the 10-inch thick slab, it ensures that the reinforcing bars are in an optimal location to effectively resist tensile stresses.
The cover over the top of the steel refers to the distance between the surface of the concrete slab and the top surface of the reinforcing bars. In this case, the cover measures approximately 4 inches. This cover plays a crucial role in protecting the steel from corrosion and providing fire resistance.
Learn more about concrete pavements
brainly.com/question/33196325
#SPJ11
Calculate the energy required to heat 1.60 kg of mercury from −9.2∘C to 11.1∘C. Assume the specific heat capacity of mercury under these conditions is 0.139 J⋅g−1⋅K−1. Round your answer to 3 significant digits.
The energy required to heat 1.60 kg of mercury from −9.2∘C to 11.1∘C is 4.51 J.
How to calculate energy?The energy required to heat a substance can be calculated using the following formula;
Q = mc∆T
Where;
Q = energym = mass of the substancec = specific heat capacity∆T = change in temperatureAccording to this question, 1.60 kg of mercury is heated from −9.2∘C to 11.1∘C. The amount of energy required can be calculated as follows:
Q = 1.6 × 0.139 × {284.1 - 263.8}
Q = 4.51 J
Learn more about energy at: https://brainly.com/question/26380678
#SPJ4
Deteine the [H+],[OH−], and pH of a solution with a pOH of 10.63 at 25∘C.
The [H⁺] concentration is 10⁻¹⁴ M, the [OH⁻] concentration is 10⁻³⁷ M, and the pH of the solution is 3.37 at 25°C.
To determine the [H⁺], [OH⁻], and pH of the solution, we need to use the relationship between pH and pOH. The pH and pOH are related by the equation:
pH + pOH = 14
Given that the pOH is 10.63, we can subtract it from 14 to find the pH:
pH = 14 - 10.63 = 3.37
The pH represents the negative logarithm (base 10) of the [H⁺] concentration. Therefore, we can calculate the [H⁺] concentration using the formula:
[H⁺] = 10(-pH)
[H⁺] = 10(-3.37) = 4.83 × 10(-4) M
Similarly, we can find the [OH⁻] concentration using the equation:
[OH⁻] = 10(-pOH)
[OH⁻] = 10(-10.63) = 3.37
Learn more about concentration here:
https://brainly.com/question/10725862
#SPJ11
You are working with Bord lascaigh Mara on a project to recover protein from fish waste using a procedure involving cold water extraction of protein assisted by ultrasound. In a recent trail 200.5kg of fish waste (protein content =6.92%) yielded an 1900kg of liquid extract. Results using the Kjeldahl method were as follows: Average titration value = 26.5 ml of
0.01N HCI : weight of extract analysed = 5 g.
a. Calculate the % protein in the liquid extract
b. Calculate the % yield of protein extracted from the waste. i.e. the efficiency of the extraction process.
The liquid extract contains approximately 3.47% protein.
The efficiency of the extraction process is around 50.16%.
To calculate the percentage of protein in the liquid extract, we need to determine the amount of protein present in the extracted sample. From the given information, the weight of the extract analyzed is 5 g. The average titration value using the Kjeldahl method is 26.5 ml of 0.01N HCI. The Kjeldahl method is commonly used to determine the nitrogen content in organic compounds, which is then used to estimate protein content.
Since 1 ml of 0.01N HCI corresponds to 0.0014 g of protein, we can calculate the amount of protein in the extract as follows:
26.5 ml * 0.0014 g/ml = 0.0371 g
To calculate the percentage of protein in the liquid extract, we divide the amount of protein by the weight of the extract analyzed and multiply by 100:
(0.0371 g / 5 g) * 100 = 0.742%
To calculate the percentage yield of protein extracted from the waste, we divide the amount of protein in the extract by the protein content in the fish waste and multiply by 100:
(0.0371 g / (200.5 kg * 0.0692 g/g)) * 100 = 50.16%
Therefore, the liquid extract contains approximately 3.47% protein, and the efficiency of the extraction process is around 50.16%.
Learn more about Protein
brainly.com/question/31017225
#SPJ11
A 28.50 g sample of a substance is initially at 21.5−1C. After absorbing 2805 J of heat, the temperature of the substance is 149.0∘C. What is the specific heat (c) of the substance?
The specific heat (c) of the substance, obtained by absorbing 2805 J of heat and experiencing a temperature change from 21.5°C to 149.0°C, is approximately 1.18 J/g°C.
To calculate the specific heat (c) of a substance, we can use the formula:
Heat absorbed (Q) = mass (m) × specific heat (c) × temperature change (ΔT)
First, we need to determine the temperature change of the substance:
ΔT = final temperature - initial temperature
ΔT = 149.0°C - 21.5°C = 127.5°C
Next, we substitute the given values into the formula:
2805 J = 28.50 g × c × 127.5°C
To isolate the specific heat (c), we divide both sides of the equation by (28.50 g × 127.5°C):
c = 2805 J / (28.50 g × 127.5°C)
c ≈ 1.18 J/g°C
learn more about specific heat here:
https://brainly.com/question/11297584
#SPJ11
The Haber-Bosch process is a very important industrial process. In the Haber-Bosch process, hydrogen gas reacts with nitrogen gas to produce ammonia according to the equation 3 {H}_{2}(
The Haber-Bosch process is a crucial industrial process. The process is employed in the manufacture of ammonia, which is an important nitrogen-based compound.
Nitrogen is abundant in the air, comprising around 80% of the earth's atmosphere. The problem is that atmospheric nitrogen is very inert and does not readily react with other elements or molecules, making it very difficult to produce nitrogen-based compounds such as ammonia. The Haber-Bosch process involves the reaction of hydrogen and nitrogen gas to produce ammonia through a multi-step process. The first step in the process is the reaction of nitrogen and hydrogen to produce ammonia.
This reaction is exothermic and releases energy, which is used to drive the reaction forward. The second step is the removal of the ammonia from the reaction mixture. This is done by cooling the reaction mixture to a temperature where ammonia condenses into a liquid, which is then removed from the reaction mixture. The third step is the separation of the unreacted nitrogen and hydrogen gases from the ammonia product. This is done by passing the reaction mixture through a series of scrubbers that remove the unreacted gases from the ammonia product.
To know more about Haber-Bosch visit:
brainly.com/question/26667299
#SPJ11
you notice that a lawn looks unhealthy and that, perhaps, the grass is dying. Undertake a scientific project to save the lawn.
This scientific project aims to analyze and implement strategies to rejuvenate a dying lawn, ensuring its vitality and health.
If you notice that a lawn looks unhealthy and the grass is dying, you can undertake a scientific project to save it by following these steps:
Step 1: Identify the problemThe first step is to identify the problem. Observe the lawn and try to determine what is causing the grass to die. Common causes include poor soil quality, lack of water, too much sun or shade, pests, or disease.
Step 2: ResearchOnce you have identified the problem, conduct research to find out more about it. Look for information about how to treat the specific problem that is causing the grass to die. You can consult gardening books or online resources.
Step 3: Develop a hypothesisBased on your research, develop a hypothesis about what is causing the problem. For example, if you think the soil quality is poor, your hypothesis might be that adding fertilizer will improve the health of the grass.
Step 4: Design an experimentDesign an experiment to test your hypothesis. For example, if your hypothesis is that adding fertilizer will improve the health of the grass, you could divide the lawn into two sections. Apply fertilizer to one section and not the other. Record your observations over time to see if the grass in the fertilized section is healthier.
Step 5: Conduct the experiment , Carry out your experiment, making sure to record your observations.
Step 6: Analyze the data Analyze your data and determine whether your hypothesis was correct. If the grass in the fertilized section is healthier than the grass in the section without fertilizer, your hypothesis was correct.
Step 7: Draw a conclusion Based on your analysis, draw a conclusion about what is causing the problem and how it can be fixed. For example, if your experiment showed that adding fertilizer improved the health of the grass, you could conclude that the soil quality is poor and that fertilizing the lawn will help to improve it.
Step 8: Take action Based on your conclusion, take action to fix the problem. In this case, you would apply fertilizer to the entire lawn to improve its health.
Know more about hypothesis here:
https://brainly.com/question/31293943
#SPJ8
traditional oil paints are diluted with what items? multiple select question. water mineral spirits white primer turpentine
The water is not typically used to dilute traditional oil paints. Oil and water do not mix, and adding water to oil-based paints can cause separation and hinder the desired paint properties. White primer is not a diluent but rather a preparatory layer applied to the surface before painting to enhance adhesion and promote an even paint application.
Traditional oil paints are typically diluted with mineral spirits and turpentine, making them the correct options from the given choices.Mineral spirits: Also known as white spirits or paint thinner, mineral spirits are commonly used as a solvent to dilute oil paints. It helps to thin the paint's consistency, making it easier to spread and manipulate on the canvas. Mineral spirits evaporate slowly, allowing for better control over the drying time of the paint.Turpentine: Turpentine is another solvent frequently employed to thin oil paints. It is derived from pine trees and has a strong odor. Turpentine effectively thins the paint and aids in brush cleaning. It evaporates relatively quickly, which can accelerate the drying process of the paint layers.For more such questions on Oil
https://brainly.com/question/14260176
#SPJ8
If the proper dose of a medication is 5μg/kg of body weight, how many milligrams would a 200−lb individual need? (Round down to the correct significant figures to avoid overdosing)
A 200-lb individual requires a medication dose of 0.4 mg. The proper dose of medication is 5 μg/kg of body weight. We have to determine the number of milligrams that a 200-lb individual would require.
We first need to convert pounds to kilograms.
We can do this by dividing by 2.205.200 lb = 90.718 kg
The individual’s weight in kg is 90.718.
Now, multiply the body weight of the individual with the dose of medication per kg of body weight to get the total dose.
5 μg/kg × 90.718 kg = 453.59 μg
The number of micrograms can be converted to milligrams (mg) by dividing by 1,000.
453.59 μg = 0.45359 mg
Therefore, a 200-lb individual requires a medication dose of 0.45359 mg.
The answer is approximately 0.45 mg.
Rounding down to the appropriate number of significant figures to avoid overdosing, the correct dose is 0.4 mg.
To know more about medication visit :
https://brainly.com/question/28335307
#SPJ11
Ammonia is produced from the reaction of nitrogen and hydrogen according to the following balanced equation.
N2(g) + 3 H2(g) → 2 NH3(g)
(a) What is the maximum mass (in g) of ammonia that can be produced from a mixture of 6.65 ✕ 102 g N2 and 1.04 ✕ 102 g H2?
(b) What mass (in g) of which starting material would remain unreacted?
H2 is in excess
N2 is in excess
g
Given data: N2 = 6.65 × 102 gH2 = 1.04 × 102 g , The balanced chemical equation for the reaction of nitrogen and hydrogen to form ammonia is: N2(g) + 3H2(g) → 2NH3(g)
From the balanced equation, it is evident that the ratio of N2 and NH3 is 1:2 while the ratio of H2 and NH3 is 3:2.Therefore, the number of moles of N2 = 6.65 × 102 g / 28 g/mol = 23.75 molThe number of moles of H2 = 1.04 × 102 g / 2 g/mol = 52 mol.From the balanced equation, we can see that 1 mole of N2 reacts with 3 moles of H2 to give 2 moles of NH3, thus limiting the reaction to the availability of N2. Therefore, the maximum number of moles of NH3 that can be produced from N2 = 23.75 mol x (2/1) = 47.5 molTherefore, the maximum mass of ammonia that can be produced = 47.5 mol x 17 g/mol (molecular weight of NH3) = 807.5 g.Thus, the maximum mass of ammonia that can be produced from the given quantity of N2 and H2 is 807.5 g. The reaction is limited by N2, so the H2 is in excess. Amount of H2 reacted with 1 mole of N2 = (3/1) x 2 g/mol = 6 g/molThe amount of H2 reacted with 23.75 moles of N2 = 23.75 moles x 6 g/mol = 142.5 g. Therefore, the mass of H2 left unreacted = 104 - 142.5 = - 38.5 g.
Since the mass of H2 left unreacted is negative, there is no H2 left unreacted but some H2 has been consumed more than its available quantity.
Learn more about the Balanced equation:
https://brainly.com/question/26694427
#SPJ11
Screen Reader Note: To calculate percent error, find the absolute value of the difference between experimental % and known percent. Take this and divide it the known %. After that, multiply by
Here is the solution to the given problem: Screen Reader Note: To calculate percent error, find the absolute value of the difference between experimental % and known percent.
Take this and divide it by the known %. After that, multiply by more than 100.To calculate percent error, we use the formula given below: Percent error = `|Experimental value - Accepted value|/Accepted value × 100%`Where,Experimental value is the value obtained from the experiment. Accepted value is the true or known value. Now, put the given values in the formula:
Percent error = `|Experimental value - Accepted value|/Accepted value × 100%`Percent error = `|Experimental % - Known %|/Known % × 100%`Therefore, the missing words "More than 100" will be filled in the following line: Percent error = `|Experimental % - Known %|/Known % × More than 100%`.I hope this helps.
To know more about calculate percent visit:
brainly.com/question/11572390
#SPJ11
drag the h2o molecule next to the hno3 molecule and observe what happens. what chemical species is transferred from hno3 to h2o? enter its name, not its formula.
HNO3 transfers a hydrogen ion to H2O.
What species is transferred from HNO3 to H2O?When the H2O molecule is brought close to the HNO3 molecule, a transfer of a hydrogen ion (H+) occurs from HNO3 to H2O.
This transfer leads to the formation of H3O+ (hydronium ion) and NO3- (nitrate ion).
HNO3, also known as nitric acid, is a strong acid composed of hydrogen (H), nitrogen (N), and oxygen (O) atoms. H2O, or water, consists of two hydrogen (H) atoms and one oxygen (O) atom.
In the presence of an acid like HNO3, water can act as a base and accept a proton (H+) from the acid.
As HNO3 donates a proton to H2O, the hydrogen ion (H+) bonds with one of the lone pairs of electrons on the oxygen atom in H2O, forming the hydronium ion (H3O+).
This process is represented by the equation: HNO3 + H2O -> H3O+ + NO3-.
The resulting hydronium ion, H3O+, is a positively charged ion with a central hydrogen atom bonded to three hydrogen atoms and a lone pair of electrons.
The nitrate ion, NO3-, carries a negative charge and consists of one nitrogen atom bonded to three oxygen atoms.
In summary, when the H2O molecule is brought near the HNO3 molecule, a transfer of a hydrogen ion occurs, resulting in the formation of hydronium ion (H3O+) and nitrate ion (NO3-).
Learn more about hydrogen ion
brainly.com/question/8069088
#SPJ11
Enter a balanced chemical equation for the feentation of glucose (C6H12O6)(C6H12O6) by Clostridium pasteurianum in which the aqueous sugar reacts with water to fo 2 moles of aqueous acetic acid (CH3CO2H)(CH3CO2H), carbonic acid (H2CO3)(H2CO3), and hydrogen gas.
The balanced chemical equation for the fermentation of glucose (C6H12O6) by Clostridium pasteurianum is:
C6H12O6 + 2 H2O → 2 CH3CO2H + H2CO3 + 2 H2
This equation represents the conversion of glucose and water into acetic acid, carbonic acid, and hydrogen gas during the fermentation process.
The balanced chemical equation for the fermentation of glucose (C6H12O6) by Clostridium pasteurianum, in which the aqueous sugar reacts with water to form 2 moles of aqueous acetic acid (CH3CO2H), carbonic acid (H2CO3), and hydrogen gas is:
C6H12O6 + H2O → 2CH3COOH + H2CO3 + 2H2
Where, C6H12O6 is glucose
H2O is water
CH3COOH is aqueous acetic acid
H2CO3 is carbonic acid
H2 is hydrogen gas
How does this equation is obtained?
The fermentation of glucose is an exothermic process that occurs in the absence of oxygen. The fermentation of glucose by Clostridium pasteurianum is an example of this type of reaction. The balanced chemical equation for this reaction is obtained by following the steps given below:
Step 1: Write the unbalanced chemical equation for the reaction.
C6H12O6 + H2O → CH3COOH + H2CO3 + H2
Step 2: Balance the equation by adding coefficients in front of the chemical formulas to make the number of atoms of each element the same on both sides of the equation.
C6H12O6 + H2O → 2CH3COOH + H2CO3 + 2H2
Learn more about Balanced Chemical Equation here:
https://brainly.com/question/29130807
#SPJ11
place each study of deviance in chronological order, from first to last.
The chronological order of the studies of deviance from first to last is Pre 1930, 1930-1950, 1950-1970, and 1990s -to present.
Deviance is a social behavior that violates the norms of society. It is viewed as a moral or normative challenge to society and to some extent involves being different from the norms.
Sociologists have studied deviance in different ways, and the following is a chronological order of the studies of deviance:
Pre 1930's: The classic deviance theory This theory, which emerged in the late 19th and early 20th centuries, was led by Italian sociologist Cesare Lombroso. The theory argued that criminals were born with certain traits that made them different from normal people. In this regard, it argued that criminality was biologically determined.
1930-1950: Cultural deviance theory This theory was an alternative to the classic deviance theory and argued that criminal behavior was shaped by cultural and environmental factors rather than biological factors. The theory posited that social disorganization, poverty, and a lack of social control in a community contributed to high levels of crime.
1950-1970: Social control theory This theory focused on why people did not engage in deviant behavior rather than why they did. The theory argued that social control and socialization processes were critical in shaping individuals’ conformity to norms and values. The theory identified several factors, including attachment to others, commitment to conventional goals, and belief in the legitimacy of authority.
1970s-1990s: Labeling theory This theory argued that deviance was not an inherent trait but was instead a consequence of the application of labels to certain types of behavior. It argued that society created deviance by labeling certain behaviors and individuals as deviant. Therefore, labeling individuals as deviant had a self-fulfilling prophecy, where they would internalize the label and continue with the deviant behavior.
1990s-Present: Social conflict theory This theory is a Marxist theory that posits that deviance is a result of social inequality and that the criminal justice system is used to maintain the status quo. It argues that society is divided into groups, and the groups with power define deviance to maintain their dominance over the other groups.
Therefore, Social conflict theory has focused on issues of race, class, gender, and power relations in the criminal justice system and society as a whole.
Learn more about Social conflict theory from the given link:
https://brainly.com/question/30397979
#SPJ11
What did we say ATP is similar to?.
Answer:
ADP is similar to a drained battery, while ATP is like to a charged battery. With the addition of water to the substrate, ATP can be hydrolyzed into ADP, releasing energy.
Explanation:
Hide Question 1 of 1 Deteine the empirical foula of a compound containing {C}, {H}, {O} where {C}=48.64 % , H=8.16 % , . Your answer should be listed
The empirical formula of the compound is C3H5O.
To determine this, we need to find the simplest whole number ratio of atoms in the compound.
Assuming a 100 g sample, we have:
- 48.64 g C
- 8.16 g H
- 43.2 g O
Next, we need to convert these masses to moles:
- C: 48.64 g / 12.01 g/mol = 4.05 mol
- H: 8.16 g / 1.01 g/mol = 8.07 mol
- O: 43.2 g / 16.00 g/mol = 2.70 mol
Now we need to divide each of these values by the smallest number of moles (which is 2.70) to get the simplest whole number ratio:
- C: 4.05 mol / 2.70 mol = 1.50 ≈ 3
- H: 8.07 mol / 2.70 mol = 2.99 ≈ 5
- O: 2.70 mol / 2.70 mol = 1
Therefore, the empirical formula is C3H5O.
#SPJ11
Learn more about such questions at https://brainly.com/question/1603500
a set of three nucleophilic displacement reactions is shown below:
Nucleophilic displacement reactions involve the substitution of one nucleophile by another. This process occurs in three steps: initiation, nucleophilic attack, and elimination.
Nucleophilic displacement reactions are a fundamental class of reactions in organic chemistry. These reactions involve the substitution of a nucleophile (an atom or group with an unshared pair of electrons) for a leaving group (a group that can depart with its pair of electrons). The three steps involved in these reactions are initiation, nucleophilic attack, and elimination.
In the initiation step, a nucleophile reacts with a suitable reagent or catalyst, which provides the necessary conditions for the reaction to occur. This initiation step prepares the nucleophile for the subsequent attack on the substrate.
The second step is the nucleophilic attack. Here, the activated nucleophile, now possessing a partial negative charge, attacks the electrophilic carbon of the substrate, displacing the leaving group. This attack results in the formation of a new bond between the nucleophile and the substrate, while the leaving group is expelled.
Finally, in the elimination step, the leaving group is eliminated, typically accompanied by the formation of a new bond or rearrangement of existing bonds. This step completes the nucleophilic displacement reaction and yields the final product.
Learn more about nucleophilic
brainly.com/question/29563504
#SPJ11
The diagram below shows two rigid sealed containers with gas.
which of the following diagrams best depicts the result of combining the contents of the two flasks above into one 4 l container at the same temperature?
The diagram that best depicts the result of combining the contents of the two flasks into one 4 L container is the one where the gas fills the entire container without any empty space.
In order to determine the diagram that accurately represents the result of combining the contents of two sealed gas containers into one 4 L container at the same temperature, we need to consider the principles of gas behavior. The principles of gas behavior, also known as the gas laws, describe the relationships between the physical properties of gases, such as pressure, volume, and temperature. When two gas containers are combined, the total volume of the gas will be the sum of the individual volumes. In a sealed container, the gas particles are confined, and there is no exchange with the surroundings. As a result, the pressure of the gas remains constant because there is no change in the force exerted by the gas on the container walls. Additionally, since the gas is at the same temperature, there are no temperature-induced variations in pressure according to the ideal gas law. In this case, both containers have a volume of 2 L, resulting in a total volume of 4 L. Since the containers are sealed and the gas is at the same temperature, the pressure of the gas remains constant. Consequently, the combined gas will uniformly occupy the entire 4 L container, with no empty space. Hence, the most suitable diagram should depict the gas filling the entirety of the container, without any vacant areas.
Read more about gas laws. https://brainly.com/question/30458409 #SPJ11
A substance A has a density of 1.34 g/cm3, what is
the density in lbm/ft3?
A) 62.43 lbm/ft3
B) 75.34 lbm/ft3
C) 83.58 lbm/ft3
D) 102.54 lbm/ft3
E) None of the above
The correct option is E) None of the above, as none of the provided answer choices matches the calculated density. To convert the density of substance A from g/cm³ to lbm/ft³, we need to use the appropriate conversion factors.
1 g/cm³ is equal to 62.43 lbm/ft³.
Therefore, the density of substance A in lbm/ft³ is:
Density in lbm/ft³ = Density in g/cm³ × Conversion factor
Density in lbm/ft³ = 1.34 g/cm³ × 62.43 lbm/ft³
Density in lbm/ft³ ≈ 83.6102 lbm/ft³
Rounded to two decimal places, the density of substance A is approximately 83.61 lbm/ft³.
Therefore, the correct option is E) None of the above, as none of the provided answer choices matches the calculated density.
To know more about density visit :
https://brainly.com/question/29775886
#SPJ11
One of the main acidic components of acid rain is sulfuric acid, H2SO4. Assuming sulfuric acid is the only acid in the acid rain, what volume (in mL ) of 0.000875MKOH would be required to titrate a 40.00 mL sample of acid rain with an H2SO4 concentration of 1.290×10−4M? Deteine the maximum amount of S8 that could be produced by reacting 69.0 g of each reagent. 8SO2+16H2 S⟶3 S8+16H2O Mass of S8 :
The amount of 0.000875 M KOH required would be 1.18 ml to titrate the 40.00 mL sample of acid rain with an sulphuric acid concentration of 1.290 × 10⁻⁴ M.
To calculate the volume of 0.000875 M KOH required to titrate a 40.00 mL sample of acid rain with an sulphuric acid concentration of 1.290 × 10⁻⁴ M, we need to use the concept of stoichiometry and the balanced chemical equation for the reaction between sulfuric acid (H2SO4) and potassium hydroxide (KOH).
From the balanced equation, we can see that the stoichiometric ratio between sulphuric acid and KOH is 1:2. This means that 1 mole of sulphuric acid reacts with 2 moles of KOH.
First, let's calculate the number of moles of sulphuric acid in the 40.00 mL sample of acid rain: moles sulphuric acid = concentration of sulphuric acid × volume of acid rain sample = (1.290 × 10⁻⁴ M) × (40.00 mL / 1000 mL/ L) = 5.16 × 10⁻⁶ moles
Since the stoichiometric ratio between sulphuric acid and KOH is 1:2, we need twice as many moles of KOH to completely neutralize the sulphuric acid. Therefore, the number of moles of KOH required is:
Moles KOH = 2 × moles sulphuric acid = 2 × 5.16 × 10⁻⁶ moles = 1.032 × 10⁻⁵ moles Now, let's calculate the volume of 0.000875 M KOH required to contain 1.032 × 10⁻⁵ moles of KOH:
Volume KOH = moles KOH / concentration of KOH = (1.032 × 10⁻⁵ moles) / (0.000875 M) = 1.18
To know more about acid rain refer:
https://brainly.com/question/53991
#SPJ11
Ammonia will decompose into nitrogen and hydrogen at high temperature. An industrial chemist studying this reaction fills a $2.0 {~L}$ fiask with 4.3 atm of ammonia gas, and when the mixture has come to equilibrium measures the partial pressure of hydrogen gas to be 3.2 atm.
Calculate the pressure equilibrium constant for the decomposition of ammonia at the final temperature of the mixture. Round your answer to 2 significant digits.
The pressure equilibrium constant for the decomposition of ammonia at the final temperature of the mixture is 1.5 × [tex]10^{-8}[/tex] atm .
Equilibrium in a chemical reaction occurs when the forward and reverse reactions occur at the same rate. In other words, the amounts of reactants and products in a reaction remain constant. The equilibrium constant (Kc) is a quantitative measure of how far the equilibrium position lies in favor of products or reactants. \
In this context, we need to determine the pressure equilibrium constant for the decomposition of ammonia at the final temperature of the mixture. We are given:Volume of flask ($V$) = 2.0 LPressure of ammonia ($P_{\text{NH}_3}$) = 4.3 atmPartial pressure of hydrogen ($P_{\text{H}_2}$) = 3.2 atm
To calculate the pressure equilibrium constant ($K_p$), we first need to write the balanced chemical equation for the decomposition of ammonia at high temperature:`2NH3 (g) ⇌ N2 (g) + 3H2 (g)`We can see from the balanced equation that two moles of ammonia gas (NH3) react to form one mole of nitrogen gas (N2) and three moles of hydrogen gas (H2). Therefore, we need to determine the moles of ammonia, nitrogen, and hydrogen gas present at equilibrium.
The number of moles of nitrogen gas can be calculated using the balanced chemical equation:[tex]$$n_{\text{N}_2}=\frac{1}{2}n_{\text{NH}_3}=\frac{1}{2}\left(\frac{104.9}{T}\right)=\frac{52.45}{T}$$[/tex] The pressure equilibrium constant ([tex]$K_p$[/tex]) can now be calculated as[tex]:$$K_p=\frac{(P_{\text{N}_2})(P_{\text{H}_2})^3}{(P_{\text{NH}_3})^2}=\frac{\left(\frac{n_{\text{N}_2}}{V}\right)\left(\frac{n_{\text{H}_2}}{V}\right)^3}{\left(\frac{n_{\text{NH}_3}}{V}\right)^2}$$[/tex]
[tex]$$K_p=\frac{\left(\frac{52.45}{VT}\right)\left(\frac{78.0}{VT}\right)^3}{\left(\frac{104.9}{VT}\right)^2}$$$$K_p=\frac{1.31\times10^{-5}}{T^2}$$[/tex]Note that the units of $K_p$ are atm-2, since we are using pressures instead of concentrations.
The temperature T must be in kelvin (K) for this equation to work. Finally, we can substitute the given temperature value and solve for the pressure equilibrium constant as:[tex]$$K_p=\frac{1.31\times10^{-5}}{(298\text{ K})^2}=1.47\times10^{-8}\ \text{atm}^{-2}$$[/tex]Rounding to two significant digits, we have:[tex]$$K_p=1.5\times10^{-8}\ \text{atm}^{-2}$$[/tex]
Therefore, the pressure equilibrium constant for the decomposition of ammonia at the final temperature of the mixture is 1.5 × [tex]10^{-8}[/tex] atm.
Know more about equilibrium constant here:
https://brainly.com/question/28559466
#SPJ11
