The energy of the photon with a frequency of 9.50×10¹³ Hz is 6.29×10¯²⁰ J
From the question given above, the following data were obtained:
Frequency (f) = 9.50×10¹³ Hz
Planck's constant (h) = 6.626×10¯³⁴ Js
Energy (E) =?The energy of the photon can be obtained as follow:
E = hf
E = 6.626×10¯³⁴ × 9.50×10¹³
E = 6.29×10¯²⁰ JTherefore, the energy of the photon is 6.29×10¯²⁰ J
Learn more: https://brainly.com/question/7957705
Please hurry and help 20 and points and brainelest
A 250. mL sample of oxygen is collected over water at 25 °C and 760.0 torr pressure. What is the partial pressure
of the oxygen? (Vapor pressure of water at 25°C is 23.8 mm Hg)
Answer:The mass of oxygen gas sample collected over water is 0.544 g.
The given parameters;
temperature of the oxygen gas, t = 25 °C
total pressure of the gas, P = 644 torr
volume of the gas, V = 500 mL
vapor pressure = 23.8 torr
molar mass of oxygen gas = 32 g/mol
The number of moles of the gas collected is calculated by using ideal gas equation as follows;
PV = nRT
where;
R is the ideal gas constant = 62.36 L.torr/mol.K
P is the pressure of the gas = 644 torr - 23.8 torr = 620.2 torr
T is the temperature of the gas = 25 + 273 = 298 K
V is the volume of the gas = 500 mL = 0.5 L
The number of moles of the gas is calculated as follows;
The mass of oxygen gas collected is calculated as follows;
m = 0.017 (32 g/mol)
m = 0.544 g
Thus, the mass of oxygen gas sample collected over water is 0.544 g.
Explanation:
The partial pressure of oxygen is; 760.0 torr - 23.8 torr = 736.2 torr.
What is partial pressure?We know that in a mixture of gases, the pressure that is exerted by each gas is called the partial pressure of the mixture.
In this case, we have the total pressure of the mixture as 760.0 torr and the vapor pressure of water as 23.8 mm Hg or 23.8 torr) at that temperature. Hence, the partial pressure of oxygen is; 760.0 torr - 23.8 torr = 736.2 torr.
Learn more about partial pressure:https://brainly.com/question/14281129
#SPJ2
LOTS OF POINTS Which statement about Fe is supported by the modern atomic theory but no John Dalton’s theory? Look at the pic provided for choices.
Answer:
https://brainly.com/question/19533453
Explanation:
This might be able to help you.
Electrical Bonding and Kinetic Energy Quick Check
2. Which statement describes the effect of adding more energy to a system, assuming a phase change does not occur?(1 point)
A. The particles within the system will have greater motion, and the temperature will decrease.
B. The particles within the system will have less motion, and the temperature will increase.
C. The particles within the system will have less motion, and the temperature will decrease.
D. The particles within the system will have greater motion, and the temperature will increase
3. Which statement correctly describes how attractions that hold particles break?(1 point)
A. Attractions occur due to gravitational forces. When particles have low enough energy, these forces can no longer keep particles together.
B. Attractions occur due to electrostatic forces. When particles have low enough energy, these forces can no longer keep particles together.
C. Attractions occur due to electrostatic forces. When particles move fast enough, these forces can no longer keep particles together.
D. Attractions occur due to gravitational forces. When particles move fast enough, these forces can no longer keep particles together.
4. Which statement explains why a rubber band analogy is not a perfect comparison for bonds in a substance when considering phase changes?(1 point)
A. For a phase change from solid to liquid, the bonds break completely and particles can move independently of each other.
B. For a phase change from solid to liquid, the bonds do not break completely and particles can still slide past each other.
C. For a phase change from liquid to gas, the bonds do not break completely and particles can still slide past each other.
D. For a phase change from liquid to gas, the bonds break completely and particles can move independently of each other.
5. The boiling point of benzene is 80ºC. Which pair of samples will have the same average kinetic energy as benzene molecules?(1 point)
A. a sample of liquid benzene at 70ºC and a sample of gaseous benzene at 90ºC
B. two samples of liquid benzene, one at 70ºC and the other at 80ºC
C. two samples of gaseous benzene, one at 80ºC and the other at 90ºC
D. a sample of liquid benzene at 80ºC and a sample of gaseous benzene at 80ºC
When particles move fast enough, these forces can no longer keep particles together.
Recall that the particles of a substance are in constant random motion. Hence, when more energy is added to the system, the particles within the system will have greater motion, and the temperature will increase.
The forces that keep molecules together in a particular state of matter are electrostatic forces. When particles move fast enough, these forces can no longer keep particles together.
It is common to use the analogy of an elastic material to represent the bonding between atoms in molecules. However, this analogy is not apt in a phase change because, for a phase change from liquid to gas, the bonds break completely and particles can move independently of each other.
We know that the average kinetic energy of the molecules of a substance depends on the temperature of the body. Therefore, a sample of liquid benzene at 80ºC and a sample of gaseous benzene at 80ºC will have the same average kinetic energy as benzene molecules.
Learn more: https://brainly.com/question/6284546
18 You are studying the boiling points of liquids with some fellow students You have two liquids of different molecular weights, and you test each of them twiceYou find that the one with a lower molecular weight also has a lower boiling point would like to be more confident with the patter you are noticing What are two possible next steps? In one to two sentencesgive specific, different examples of how the experiment could be extended assessed or improved
Answer:
The edge of boiling over of the substance relies upon the strength of holding between the particles, unequivocally the intermolecular powers between the atoms. The intermolecular powers that exist between the particles relies upon the idea of the atoms like extremity, sub-atomic weight, design of the atom, and so forth In testing the edge of boiling over of the two given fluids, the expansion in edge of boiling over can be noticed for the compound with higher limit. This demonstrates that there is lower intermolecular power in the compound with lower atomic weight.
Explanation:
Hope this helps
The strength of holding between the particles, namely the intermolecular forces between the atoms, determines the substance's edge of boiling over. The intermolecular forces between the particles depend on concepts related to atoms, such as extremities, sub-atomic weight, atom design, and so on.
What is an atom ?Each atom is made up of a nucleus and one or more electrons that are linked to it. One or more protons and a significant number of neutrons make up the nucleus. Only the most prevalent type of hydrogen is neutron-free. Atoms that are neutral or ionized make up every solid, liquid, gas, and form of plasma.
But when it comes to the name atom, we must travel back to 400 B.C. ancient Greece. The Greek word atomos, which meaning "uncuttable," was proposed by Democritus, a renowned philosopher. In the end, all matter could be reduced to distinct, tiny particles, or atomos, he said.
When the two supplied fluids' edges of boiling over are tested, the compound with the greater limit exhibits an expansion in the edge of boiling over. This illustrates that the compound with a lower atomic weight has a lower intermolecular power.
Thus,The intermolecular forces between the particles depend on concepts related to atoms.
To learn more about an atom, follow the link;
https://brainly.com/question/29695801
#SPJ5
How does covalent bonding take place?
A. A nonmetallic element like Fluorine is attracted to a metallic element like
Sodium.
B. A metallic element like Sodium transfers an electron to a non-metallic element
like Fluorine.
C. Two or more non-metallic elements share electrons to attain stability.
D. Two or more non-metallic elements of the same kind form strong forces of
attraction.
How did the scientists create atoms of element 115
Answer:
With ions of calcium in a cyclotron. This produced four atoms of moscovium. Moscovium is a synthetic element with the symbol Mc and atomic number 115. It was first synthesized in 2003 by a joint team of Russian and American scientists at the Joint Institute for Nuclear Research (JINR) in Dubna, Russia. In December 2015, it was recognized as one of four new elements by the Joint Working Party of international scientific bodies IUPAC and IUPAP. On 28 November 2016, it was officially named after the Moscow Oblast, in which the JINR is situated.[7][8][9]
Moscovium is an extremely radioactive element: its most stable known isotope, moscovium-290, has a half-life of only 0.65 seconds.[10] In the periodic table, it is a p-block transactinide element. It is a member of the 7th period and is placed in group 15 as the heaviest pnictogen, although it has not been confirmed to behave as a heavier homologue of the pnictogen bismuth. Moscovium is calculated to have some properties similar to its lighter homologues, nitrogen, phosphorus, arsenic, antimony, and bismuth, and to be a post-transition metal, although it should also show several major differences from them. In particular, moscovium should also have significant similarities to thallium, as both have one rather loosely bound electron outside a quasi-closed shell. Over a hundred atoms of moscovium have been observed to date, all of which have been shown to have mass numbers from 286 to 290.
Explanation:
Hope this helps u please make brainlyest
Using calcium ions in a cyclotron. As a result, four moscovium atoms were created. Moscovium is a man-made element with the atomic number 115 and the symbol Mc
Where was the element 115 created for first time ?Heavy ion collisions in particle accelerators have intentionally produced element 115, also known as Moscovium. So far, about 100 atoms have been seen.
At the Joint Institute for Nuclear Research (JINR) in Dubna, Russia, a team of Russian and American scientists initially created it in 2003.
It was acknowledged as one of four new elements by the Joint Working Party of the worldwide scientific organisations IUPAC and IUPAP in December 2015. It was formally named after the Moscow Oblast on November 28, 2016.
Thus, Element 115 i.e. moscovium was created using calcium ion of cyclotron.
To learn more about element 115 follow the link below;
https://brainly.com/question/14679547
#SPJ2
Given that E°red = -0.40 V for Cd2+/Cd at 25°C, find E° and E for the concentration cell expressed using shorthand notation below.
Cd(s) ∣ Cd2+(1.0 × 10-5 M) ∣∣ Cd2+(0.100 M) ∣ Cd(s)
E° = 0.00 V and E = +0.12 V
E° = 0.00 V and E = +0.24 V
E° = -0.40 V and E = -0.16 V
E° = -0.40 V and E = -0.28 V
From the information in the question, the E° and E for the cell is 0.00 V and 0.12 V.
Using the Nernst equation;
Ecell = E°cell - 0.0592/n log Q
We know that E°cell = 0.00 V since the anode and cathode are both made up of cadmium.
Substituting the given values into the Nernst equation;
Ecell = 0.00 V - 0.0592/2 log (1.0 × 10-5 M/0.100 M)
Ecell = 0.00 V - 0.0296 log(1 × 10^-4)
Ecell = 0.12 V
Learn more: https://brainly.com/question/8646601
no links plz!!
CaOCl2 parent acid and base???
Answer:
this is not and reaction of acid and base.(CaOCL2)
Explanation:
Ca2, Cl, are base and O is a neutral.
so how can that be a acid and base reaction
a. What are the half-reactions for the redox reaction CuCl2 + Zn → ZnCl2 + Cu? Label the oxidation
reaction and the reduction reaction. (1 point)
PLS HELP 100 points
The oxidation half equation is Zn ------> Zn^2+ + 2e while the reduction half equation is Cu^2+ + 2e------> Cu.
A redox reaction is a reaction in which there is a loss/gain of electrons. The specie that gives out electrons experiences an increase in oxidation number while the specie that gains the electrons experiences a decrease in oxidation number.
For the reaction; CuCl2 + Zn → ZnCl2 + Cu
The oxidation half equation is;
Zn ------> Zn^2+ + 2e
The reduction half equation is;
Cu^2+ + 2e------> Cu
The chloride ion is excluded because its oxidation number does not change from left to right in the reaction.
Learn more: https://brainly.com/question/967776
9. Circle the element in each pair that has the greater electronegativity.
→ Ca or Ge
→ Li or o
→ CI or s
→ Br or As
Answer:
1. Ga
2. O
3. Cl
4. Br
under which conditions do you expect helium gas to deviate most from ideal behavior?
Answer:
Explanation:
[2-0] NC Special Operation
[2] Supervisor
[2-1] Emergency Response
[2-2] Juggernaut
[2-3] Commander
[2-4] Division Director
How do plants slow down erosion?
They slow down water as it runs downhill.
They speed up water as it runs downhill.
Their roots crack open rocks.
Their roots create new rock.
Answer:
I'm thinking the answer is gonna be it slows it down as it runs down hill
what two elements are present in the compounds in the last two rows of table 4
Answer:could u expand on the question
Explanation:
What is the unabbreviated electron configuration for Neptunium?
Answer:
Please mark me as brainliest and also give me 5 start Thank you
Explanation:
The radioactive element neptunium (atomic number 93) has the electron configuration
1s2 2s2 2p6 3s2 3p6 3d10 4s2 4p6 5s2 4d10 5p64f14 5d10 6s2 6p6 7s2 6d1 5f4
The noble gas form is
[Rn] 7s2 6d1 5f4
What is the correct formula for tetraphosphorous octaoxide
P4O10
P4O8
Ph4O8
P5O8
P_4O_8
How?
Let's learn how to create name of compound from its name.
Look below for root words
2-di 3-tri4-tetra5-pent6-hex7-hept8-oct9-non10-decHence formula of the compound is P4O8
Read through the literacy task
find the mistakes and rewrite
Find and highlight the 10 mistakes
Atoms are the smallest particle that make up living things, they are made up of subatomic particles; protons, neutrons and electrons. Of these the electrons and neutrons are in the nucleus and the protons orbit around the nucleus. Of the subatomic particles, the electrons have the largest mass and are negatively charged, the neutrons (negative charge) and protons (positively charged) both have a relative mass of 1. Atoms contain an equal number of protons and neutrons, so carry no overall charge. An element is a substance made up of only two types of atom. Elements can be found in the Periodic table of elements, they usually have two numbers next to the chemical symbol, the larger number is generally the atomic number, which represents the number of neutrons and the number of protons. The smaller number is the relative atomic mass which represents the number of electrons or neutrons. In order to calculate the number of neutrons, you minus the atomic number from the relative atomic mass.
Answer:
Atoms are the smallest particle that make up living both living and non living things, they are made up of subatomic particles; protons, neutrons and electrons. Of these the electrons protons and neutrons are in the nucleus and the protons electrons orbit around the nucleus. Of the subatomic particles, the electrons have the largest smallest mass and are negatively charged, the neutrons (negative charge) (no charge) and protons (positively charged) both have a relative mass of 1. Atoms contain an equal number of protons and neutrons electrons, so carry no overall charge. An element is a substance made up of only two one type of atom. Elements can be found in the Periodic table of elements, they usually have two numbers next to the chemical symbol, the larger number is generally the atomic mass number, which represents the number of neutrons and the number of protons. The smaller number is the relative atomic mass atomic number which represents the number of electrons or neutrons protons. In order to calculate the number of neutrons, you minus the atomic number from the relative atomic mass.
the distance between two successive peaks is called
PLEASE HELP ME ASAAAAPPPPPPPPPPPPPP!!!!!!!!!!!!!!!!!!!!!!!
Balance the chemical equation using the algebraic method.
C4H10+O2=CO2+H2O
SHOW YOUR WORK PLEASEEEEEEEEE
Potential energy depends on
Question 2 options:
Length and color
Position or shape
Density and volume
Speed and velocity
Answer:
Explanation:
Speed and velocity I think
why the mixture of bromine and ethane is discoloured when left in the sun
Answer:
In the presence of UV light, ethane will react with bromine in a substitution reaction. UV light is the condition under which the reaction will occur so it is written above the arrow in the chemical equation. As the reaction proceeds, the intensity of the re-brown colour of the bromine water decreases.
Answer:
here ya go
Explanation:
combining bromine and ethane leads to a brown gas or liquid which is made of the elements. it is a gas at room temperature and does not affect human beings. there are many uses for bromine compounds but they are mainly used for the manufacturing of chlorine, fire retadants, water purification, graphy chemicals and pharmaceutcals. it is a naturally occurring element that can be found in animals such as sharks since they produce their own.
when calculating specific heat what if the change in temperature is negative?
Answer:
If AT and q are negative, then heat flows from an object into its surroundings. If a substance gains thermal energy, its temperature increases, its final temperature is higher than its initial temperature, then AT>0 and q is positive.
4. If the speed of an object increases, its kinetic energy
stays the same
decreases
increases
Answer:
I think the answer is increases
I need the answer of these questions
Answer: 33. Lattice
35. Covalent
38. Triple covalent bond
What mass of water absorbs 6700 J of heat to raise the temperature from 283K to 318K?
Answer:
you did not give the specific heat like formula like it takes 1kj to raise 28grams of water by 10 grams
How many cubic meters of carbon dioxide is required to ensure the noncombustibility of a 500-cubic-meter compartment filled with propane vapor
Answer:
200 m^3
Explanation:
1000m³ of Carbon dioxide is required.
Propane is a type of hydrocarbon that is made up of a single carbon-carbon bond.
Propane burns in oxygen completely in a combustion reaction to produce carbondioxide and water.
The balance equation of combustion of propane gas is:
C3H8(g)+5O2(g)→3CO2(g)+4H2O(g).
But noncombustibility of propane is the incomplete combustion of propane which occurs in absence or insufficient oxygen supply.
The balanced equation for noncombustibility of propane is:
2C3H8 + 9O2 → 4CO2 + 2CO + 8H2O
2 moles of propane = 4 moles of CO2
CO21 mole of propane = 2 moles of CO2 (4moles/2moles)
Therefore 500cm³ of propane = 2 × 500
= 1000cm³
Therefore, 1000m³ of Carbon dioxide is required to ensure the noncombustibility of a 500-cubic-meter compartment filled with propane vapor
Learn more about hydrocarbons here:
https://brainly.com/question/3551546
Explain why copper has a high thermal conductivity.
Explain why copper has a high electrical conductivity.
i just need like a basic explanation for an essay
Explanation:
So copper is a lattice of positive copper ions with free electrons moving between them.
How do you produce a buffer.
Answer:
Buffers can be made from weak acids or base and their salts.
Explanation:
hope this helps!
(if not tell me in the comments and i will try to help you!)
Answer:
Buffers are made by adding a strong acid or base to a weak acid or base.
Explanation:
T or F: Lone pairs around the oxygen atom of a water molecule play no role in determining its molecular geometry?
Answer:
Explanation:
They play a very important part. The geometry is not a straight line. It is an angle over 90 which means that the molecule has the same general shape as a boomerang. The two hydrogens and the 2 lone electron pairs try to get away as far as possible from each other. The actual shape results in a tetrahedron shape. But the two hydrogens and 1 oxygen actually look like the aforementioned boomerang.
Which describes an element?
They cannot be broken down any further.
They can combine with other elements to form atoms.
They were all discovered at the same time.
They were created in the Earth’s core.
Answer:
They cannot be broken down any further
Explanation:
An element is a substance that cannot be broken down into a simpler format. They are distinguished by a unique atomic number. The elements are organized by their atomic number in the periodic table, which highlights elements with similar properties.
