Answer:
2 Hg (g) + o2 ---> 2 H2o
equilibrium constant
K = (c) (d) / (a)(b)
K= ( H2o)²/(He) ²(o2)
Cyclopropane is a compound of carbon and hydrogen that is used as a general anaesthetic. When 1 g of this substance was burned completely in oxygen, 3.14 g of carbon dioxide and 1.29 g of water were produced. What is the empirical formula of the compound? The molar mass of cyclopropane is about 42 g/mol. What is the molecular formula?
What is the mass in grams of carbon dioxide that would be required to react with 75.8 g of LiOH in the following chemical reaction? 2 LiOH(s) + CO₂(g) → Li₂CO₃(s) + H₂O(l)
Answer:
69.6 g CO₂
Explanation:
To find the mass of carbon dioxide, you need to (1) convert grams LiOH to moles LiOH (via molar mass from periodic table values), then (2) convert moles LiOH to moles CO₂ (via mole-to-mole ratio from reaction coefficients), and then (3) convert moles CO₂ to grams CO₂ (via molar mass). It is important to arrange the ratios/conversions in a way that allows for the cancellation of units (desired unit in the numerator). The final answer should have 3 sig figs to reflect the given value's sig figs.
Molar Mass (LiOH): 6.9410 g/mol + 15.998 g/mol + 1.008 g/mol
Molar Mass (LiOH): 23.947 g/mol
2 LiOH(s) + 1 CO₂(g) ----> Li₂CO₃(s) + H₂O(l)
Molar Mass (CO₂): 12.011 g/mol + 2(15.998 g/mol)
Molar Mass (CO₂): 44.007 g/mol
75.8 g LiOH 1 mole 1 mole CO₂ 44.007 g
------------------ x ---------------- x ----------------------- x ------------------- =
23.947 g 2 moles LiOH 1 mole
= 69.6 g CO₂
The mass in grams of carbon dioxide that would be required to react with 75.8 g of LiOH is 69.3g
What is Mole?The mole is an amount unit similar to familiar units like pair, dozen, gross, etc. It provides a specific measure of the number of atoms or molecules in a bulk sample of matter.
A mole is defined as the amount of substance containing the same number of atoms, molecules, ions, etc. as the number of atoms in a sample of pure 12C weighing exactly 12 g.
Given,
Mass of LiOH = 75.8g
Moles of LiOH = mass / molar mass
= 75.8 / 24 = 3.15 moles
From the reaction,
2 moles of LiOH react with 1 mole of CO₂
1 mole of LiOH needs 0.5 moles of CO₂
thus, 3.15 moles will need 0.5 × 3.15 moles = 1.575 moles of CO₂
Mass of Carbon dioxide = 1.575 × 44
= 69.3g of carbon dioxide
Therefore, the mass in grams of carbon dioxide that would be required to react with 75.8 g of LiOH is 69.3g
Learn more about Moles, here:
https://brainly.com/question/26416088
#SPJ2
The chemist discovers a more efficient catalyst that can produce ethyl butyrate with a 78.0 % yield. How many grams would be produced from 7.45 g of butanoic acid and excess ethanol?
Express your answer in grams to three significant figures.
7.66g of ethyl butyrate is produced.
The reaction is
CH₃CH₂CH₂COOH + CH₃CH₂OH ----> CH₃CH₂CH₂COOCH₂CH₃
The molar mass of butanoic acid is 88.11g/molWe have 7.45g of butanoic acidThe moles of butanoic acid we have is 7.45/88.11 = 0.0845 molIf the yield is 100%, 1 mole of butanoic acid gives 1 mole of ethyl butyrateBut the reaction yield is 78%1 mole of butanoic acid gives 0.78 mole of ethyl butyrateFrom 0.0845 mol of butanoic acid we get 0.78 x 0.0845 = 0.66 mol of ethyl butyrate.
The molar mass of ethyl butyrate is 116.16g/mol
So 0.66 x 116.16 = 7.66g
7.66g of ethyl butyrate is produced.
Learn more about esterification here:
https://brainly.com/question/14028062
#SPJ10
After scientists use a careful process to gather evidence and establish scientific facts, which step most likely occurs next in the scientific process? conducting experiments testing new conditions Ostudying new topics determining explanations After scientists use a careful process to gather evidence and establish scientific facts , which step most likely occurs next in the scientific process ? conducting experiments testing new conditions Ostudying new topics determining explanations
Answer:
Conducting Experiments
If you have the following chemical equation and you begin balancing it as such,
C5H10 + O2 --> 5CO2 + 5H2O
How many oxygens do you have on the product side at this point in the balancing?
Answer:
15 oxygens
Explanation:
Given the partially balanced reaction: [tex]\text{C}_{\text{5}}\text{H}_{\text{10}}+\text{O}_{\text{2}} \rightarrow \text{5C} \text{O}_{2}}+\text{5H}_\text{2}\text{O}[/tex]
The subscripts (small number to the right of each element symbol) are the number of atoms of the element within each compound/molecule, and the coefficients (numbers in front of each compound) represent the number of that molecule involved in one full reaction (if the equation were balanced).
The product side of the reaction is on the right of the arrow.
To determine the total number of Oxygens on the product side, we need to identify how many Oxygens are in each molecule (the subscript on the Oxygen), and then multiply times the number of that molecule that would be involved (Coefficient of the compound containing Oxygen). There are multiple compounds on the right side of the equation that contain Oxygen, so we'll need to add together the number of Oxygens each part contributes.
[tex]\text{C}_{\text{5}}\text{H}_{\text{10}}+\text{O}_{\text{2}} \rightarrow \bold{5}\text{C} \bold{O_{2}}+\bold{5}\text{H}_\text{2}\bold{O}[/tex]
[tex]\text{\# reactant-side Oxygens}=\bold{5}\text{C} \bold{O_{2}}+\bold{5}\text{H}_\text{2}\bold{O}\\=5 \text{ CO}_{\text{2}}\text{ molecules} *\frac{\text{2 Oxygens}}{\text{1 CO}_{\text{2}}\text{ molecule}}+5 \text{ H}_{\text{2}}\text{O molecules} *\frac{1\text{ Oxygen}}{\text{1 H}_{\text{2}}\text{O molecule}}\\=10\text{ Oxygens}+5\text{ Oxygens}\\=15\text{ Oxygens}[/tex]
Which of the following would cause an increase in the magnetic force
between two magnets?
A. Decreasing the separation between the two magnets
B. Increasing the separation between the two magnets
C. Decreasing the amount of excess charge on the first magnet
D. Increasing the amount of excess charge on the first magnet
Decreasing the separation between the two magnets will result in increase in the magnetic force between two magnets.
What is a Magnet?This is referred to a substance which produces magnetic field and result in the attraction and repulsion of certain types of things.
Increase in the separation will reduce the magnetic force and vice versa which is why option A was chosen.
Read more about Magnet here https://brainly.com/question/14997726
#SPJ1
If an element has 11 protons and 12 neutrons and 11 electrons, what is the atomic mass of the element?
The atomic mass of the unknown element is; 23
How to find the atomic mass of an element?We are given that;
Number of protons = 11
Number of Neutrons = 12
Number of Electrons = 11
Now, formula for atomic mass is;
Atomic mass = Number of Neutrons + Number of Electrons
Atomic Mass = 12 + 11
Atomic Mass = 23
Read more about Atomic Mass at; https://brainly.com/question/3187640
#SPJ1
Magnesium reacts with sulfuric acid according to the fol-
lowing equation. How many moles of H₂ are produced by
the complete reaction of 230. mg of Mg with sulfuric acid?
Mg(s) + H₂SO (aq) →
MgSO₂(aq) + H₂(g)
Answer:
The moles of H2 is 230-two hundred and thirty
An unknown compound contains only C , H , and O . Combustion of 6.80 g of this compound produced 16.0 g CO2 and 4.37 g H2O . What is the empirical formula of the unknown compound?
Answer:
I am a small palm-sized pointing device
Select the correct answer.
Which type of crude oil is considered to be the highest quality for gasoline?
O Brent Blend
O West Texas Intermediate
O OPEC Blend
O All crude oil
The type of crude oil that is considered to be the highest quality for gasoline is West Texas Intermediate (Option B).
What is oil?Oil is a fossil fuel obtained from Earth's crust, which is fundamental nowadays to generate electricity.
West Texas Intermediate is a highly pure and high-type energy source of crude oil used in industry.
In conclusion, the type of crude oil that is considered to be the highest quality for gasoline is West Texas Intermediate.
Learn more about oil fuel here:
https://brainly.com/question/79954
#SPJ1
A gas has a volume of 350 mL at 45 oK. If the volume changes to 400 mL, what is the new temperature?
Answer:
T₂ = 39.4 °K
Explanation:
Because you are only dealing with volume and temperature, you can use Charles' Law to find the missing value. The formula looks like this:
V₁ / T₁ = V₂ / T₂
In this formula, "V₁" and T₁" represent the initial volume and temperature. "V₂" and "T₂" represent the final volume and temperature. You have been given values for all of the variables except for "T₂". Therefore, by plugging these values into the formula, you can simplify to find the answer.
V₁ = 350 mL T₁ = 45 °K
V₂ = 400 mL T₂ = ?
V₁ / T₁ = V₂ / T₂ <----- Charles' Law formula
(350 mL)(45 °K) = (400 mL)T₂ <----- Insert values into variables
15750 = (400 mL)T₂ <----- Multiply left side
39.4 = T₂ <----- Divide both sides by 400
If 4.5 moles of an ideal gas has a temperature of 286 K and a pressure 9.4 atm, what is the volume of the container
Answer:
V = 11 L
Explanation:
To find the missing value, you need to use the Ideal Gas Law. The equation looks like this:
PV = nRT
In this formula,
----> P = pressure (atm)
----> V = volume (L)
----> n = number of moles
----> R = constant (0.0821 atm*L/mol*K)
----> T = temperature (K)
You have been given all of the values in the correct units. Therefore, you can plug these values into the equation and simplify to find volume. The answer should have 2 sig figs to match the given value with the lowest amount of sig figs.
PV = nRT
(9.4 atm)V = (4.5 moles)(0.0821 atm*L/mol*K)(286 K)
(9.4 atm)V = 105.6627
V = 11 L
At a certain temperature this reaction follows first-order kinetics with a rate constant of 0.086 s^-1:
2H3PO4(aq)=P2O5(aq)+3H2O(aq)
Suppose a vessel contains H3PO4 at a concentration of 1.27 M . Calculate how long it takes for the concentration of H3PO4 to decrease to 7.0% of its initial value. You may assume no other reaction is important.
Round your answer to 2 significant digits.
Please, need this ASAP
It takes 31 s for 1.27 M H₃PO₄ to decrease its concentration to 7.0% of its initial value following first-order kinetics.
What is first-order kinetics?First-order kinetics occur when a constant proportion of a reactant disappears per unit time.
Let's consider the following first-order kinetics reaction with a rate constant k = 0.086 s⁻¹.
2 H₃PO₄(aq) = P₂O₅(aq) + 3 H₂O(aq)
Given the initial concentation is [H₃PO₄]₀ = 1.27 M, the concentration representing 7.0% of this value is:
[H₃PO₄] = 7.0% × 1.27 M = 0.089 M
We can calculate the time elapsed (t) using the following expression.
ln ([H₃PO₄]/[H₃PO₄]₀) = - k × t
ln (0.089 M/1.27 M) = - 0.086 s⁻¹ × t
t = 31 s
It takes 31 s for 1.27 M H₃PO₄ to decrease its concentration to 7.0% of its initial value following first-order kinetics.
Learn more about first-order kinetics here: https://brainly.com/question/18916637
#SPJ1
Which of the following is an impact of an increase in motor vehicles in cities?
Oxygen levels have increased
Carbon dioxide levels have increased
Supply of renewable resources has stopped
Supply of nonrenewable resources has become unlimited
Refer to the following table of Ksp values to answer the question below.
Compound
PbS
SnS
ZnS
HgS
Ksp
3 x 10-29
1 x 10-26
2x 10-25
1.6 x 10-52
A solution has 0.01 M Pb²+, 0.01 M Sn²+, 0.01 M Zn²+, and 0.01 M Hg2+. As tiny amounts of sulfide ion are slowly added
to the solution, which compound will precipitate first?
PbS
O Fes
HgS
SnS
HgS will precipitate first when tiny amounts of sulfide ion are slowly added to the solution.
What is Ksp?The solubility product constant, Ksp, is the equilibrium constant for a solid substance dissolving in an aqueous solution. It represents the level at which a solute dissolves in solution.
If Solubility product is greater than the ionic product then no precipitate will form on adding more solute because unsaturated solution is formed.
If Solubility product is lower than the ionic product then excess solute will precipitate out because of the formation of super saturated solution.
Here, Ksp value of HgS is very low. Hence, HgS will precipitate first when tiny amounts of sulfide ion are slowly added to the solution.
Learn more about Ksp here:
https://brainly.com/question/4637627
#SPJ1
S + 6 HNO3 →→ H₂SO4 +6 NO₂ + 2 H₂O
->
In the above equation, how many grams of water can be made when 19.7 moles of HNO3 are
consumed?
Round your answer to the nearest tenth. If you answer is a whole number like 4, report
the answer as 4.0
Use the following molar masses. If you do not use these masses, the computer will mark
your answer incorrect.:
Element
Molar
Mass
Hydrogen 1
Nitrogen 14
Sulfur
32
Oxygen 16
12
11C. Potassium hydrogen phthalate is a solid, monoprotic acid frequently used in the laboratory to standardize strong base solutions. It has the unwieldy formula of KHC8H4O4. This is often written in shorthand notation as KHP .If 3.41 grams of KHC are needed to exactly neutralize 31.2 mL of a potassium hydroxide solution, what is the concentration of the base solution?
13B.
H3AsO4 + H2C2O4—--------2CO2 + H3AsO3+ H2O
In the above redox reaction, use oxidation numbers to identify the element oxidized, the element reduced, the oxidizing agent and the reducing agent.
name of the element oxidized:
name of the element reduced:
formula of the oxidizing agent:
formula of the reducing agent:
For the reactants,
The oxidation number of hydrogen = +1The oxidation number of oxygen = -2The oxidation number of arsenic = +5The oxidation number of carbon = +3For the products,
The oxidation number of hydrogen = +1The oxidation number of oxygen = -2The oxidation number of arsenic = +3The oxidation number of carbon = +4Here, arsenic (+5 to +3) and carbon (+3 to +4) are the only oxidation numbers changing.
Note that an increase in oxidation number means electrons are lost. Thus oxidation is occurring, and a decrease in oxidation number means electrons are being gained, and thus reduction is occurring.
Also, the compound that contains the element being oxidized is the reducing agent, and the compound that contains the element being reduced is the oxidizing agent.
So, the answers are:
name of the element oxidized: Carbon
name of the element reduced: Arsenic
formula of the oxidizing agent: [tex]\text{H}_{3}\text{AsO}_{4}[/tex]
formula of the reducing agent: [tex]\text{H}_{2}\text{C}_{2}\text{O}_{4}[/tex]
Which data are shown on topographic maps?
Answer:
Topographic maps generally shows Natural features such as Rivers and Lakes.
sometimes they also show some features made by humans like brodges, elevations etc.
Answer:
Topographic maps show contours, elevation, forest cover, marsh, pipelines, power transmission lines, buildings, and various types of boundary lines such as international, provincial, and administrative, and many others.
please give me brainliest
Explain how you would determine the charge of a metal, a non
metal and a transition metal for an ion within a compound. Be
prepared to provide the charge of an element on the periodic
table from each of these categories.
Answer:
In order to determine the charge of these elements you'll have to look at their placement in the periodic table by group number.
Explanation:
To further explain this, there is 18 groups of the periodic table. These groups include:
Group 1: The alkali metals have a 1+ charge for their entire group.
For example: Sodium would have a charge of 1+.
Group 2: The earth alkali metals all have a charge of 2+. For example Mg has a charge of 2+.
Group 3-12: The transitions metals are a little harder to figure the charge of each, if given the compound they are bonded with you can use that to figure it out but only a few have distinct charges. Such as Ag (Silver) only have a 1+ charge. If you are still trying to figure the charge, try making an electron configuration to figure out it's spare electron count or charge.
Group 13: These elements in group 13 have a typical charge of 3+. For example Al has a charge of 3+.
Group 14: These elements in group 14 have a typical charge of 4+. For example Carbon has a charge 4+
Group 15: These elements start the shift towards a negative charge in the table, so for group 15 the elements have a 3- charge. For example Nitrogen has a 3- charge.
Group 16: These elements continue with a negative in group 16 with a negative charge of 2-. For example Oxygen's charge is 2-.
Group 17: The halogen elements in group 17 have a charge of 1-. For example Chlorine has a charge of -.
Group 18: The noble gases in group 18 do not have a charge because they are some of the most stable elements so they're not looking to gain or lose an electron (That is what a charge is basicaly). So, they're charge is none.
Fe + H₂O → Fe3O4+H₂ help
Answer:
3Fe + 4H₂O --> Fe3O4 + 4H2
What is organic chemistry? Name at least three categories of compounds that are studied as
a part of organic chemistry.
Answer:
organic chemistry is chemistry focused on structure and composition, extending to recations and properties of compounds.
often centered around compounds with carbon.
alcohols, amines, and aldehydes are some groups that are studied on organic chemistry
SHORT ANSWER:
a) chemistry focused on the structure qnd composition of compounds
b) alcohols, amines, aldehydes
Explanation:
Organic compounds, which are the compounds associated with life processes, are the subject matter of organic chemistry. Among the numerous types of organic compounds, four major categories are found in all living things: carbohydrates, lipids, proteins, and nucleic acids.
When developing an experimental design, which action would improve the
quality of the results?
O A. Have a different researcher make the measurements.
OB. Ensure that it answers a question about cause and effect.
C. Include as many responding variables as possible.
OD. Keep the sample size of test subjects to a minimum.
SUBMIT
Answer:
A
Explanation:
I'm right I took the test
Why barbituric acid in name of acid
How many moles are in 15000 atoms of iron (Fe)?
Avogadro's law states that in each mole of a substance, there are [tex]6.022 \times 10^{23}[/tex] particles.
This means that 15000 atoms is equal to [tex]\frac{15000}{6.022 \times 10^{23}}=\boxed{2.4909 \times 10^{-20} \text{ moles (to 5 sf)}}[/tex]
There are 2.49 × [tex]10^{-20}[/tex] moles present in 15000 atoms of iron (Fe).
What is a mole?A mole is the quantity of a material that includes 6.023 x [tex]10^{23}[/tex] of that substance's components.
What is an atom?The smallest component of ordinary stuff that makes up a chemical element would be an atom.
Calculation of mole
It is known that 1 mole = 6.023 x [tex]10^{23}[/tex] particles.
So, the 1500 atoms will be equal to the = 1500 / 6.023 x [tex]10^{23}[/tex] = 2.49 × [tex]10^{-20}[/tex] moles .
Therefore, there are 2.49 × [tex]10^{-20}[/tex] moles present in 15000 atoms of iron (Fe).
To know more about mole and atoms
https://brainly.com/question/1566330
#SPJ2
Lisa made observations of stars at different times of the year. She noticed a lot of patterns in the fall, while she couldn't find any patterns in the summer. Why might this be?
This is because fall has more weather patterns which are repetitive than summer.
What is Weather?This is defined as the atmospheric condition of a particular place at a given period of time.
The repetitive weather patterns have various effects on the stars which is why they were studied.
Read more about Weather here https://brainly.com/question/12455866
#SPJ1
Calculate the pH of a solution with [H+] = 2.52 x 10^-5.
Answer:
pH = 4.6
Explanation:
pH is the negative of the log of the hydrogen ion concentration
- log { 2.52 x 10^-5) = ~ 4.6
You need to measure out exactly 6.7 mL of water for an experiment. Which of the following would be the best tool for the job?
a. A 250 mL beaker
c. A 50 mL graduated cylinder
b. A 10 mL graduated cylinder
d. A 150 mL Erlenmeyer flask
Answer:
The answer for this problem would be "b. A 10 mL graduated cylinder".
Explanation:
The reason for this is because with a instrument that is closer to the value you're trying to measure, the more precise it will be.
For example using a teaspoon to measure something rather than a cup.
Acid rain is caused by which of the following?
excess carbon dioxide
deforestation
nitrogen compounds in the soil
nitrogen compounds in the air
Answer:
nitrogen compounds in the air
Explanation:
How many moles of nitrogen, N , are in 69.0 g of nitrous oxide, N2O ?
Answer:
1.57
Explanation:
moles = mass / molar mass
moles = 69 / 44.013
moles = 1.57
moles N₂O = 69 : 44 g/mol = 1.568
N₂O : 2 moles N, 1 mole O
moles N = 1.568 x 2 = 3.136
C6H12O6 + 6O2 → 6CO2 + 6H2O + energy
Carbon dioxide + Water Glucose (sugar) + Oxygen CO2 + H2O C6H12O6 + 6O2 Cellular respiration or aerobic respiration is a series of chemical reactions which begin with the reactants of sugar in the presence of oxygen to produce carbon dioxide and water as waste products.
