28 points!! please help

Answer: Short Answer: NO ( In Most Cases)

Explanation:

If that were true then planes couldn't get off the ground to fly. The front of the wing is cutting/pushing the air. On the top of the wing the air moves faster and on the bottom it moves slower making a upward draft giving the object the ability to fly or glide.

Answer:

The average velocity of Jackson is 18.056 m/s South

The average velocity of Hunter is 10.65 m/s East

Explanation:

initial velocity of Jackson, u = 25 km/h east = 6.944 m/s east

time for this motion, [tex]t_i[/tex] = 20 minutes = 1200 seconds

⇒initial displacement of Jackson, [tex]x_i[/tex] = (6.944 m/s) x (1200 s) = 8332.8 m

Final velocity of Jackson, v =  45 km/h South = 12.5 m/s South

time at Jackson's final position, [tex]t_f[/tex] = 20 minutes + [tex]t_i[/tex] = 20 minutes + 20 minutes

time at Jackson's final position, [tex]t_f[/tex] = 40 minutes = 2400 s

⇒Final displacement of Jackson,[tex]x_f[/tex] = (12.5 m/s) x (2400 s) = 30,000m

Average velocity of Jackson;

[tex]= \frac{x_f-x_i}{t_f-t_i} \\\\= \frac{30,000-8332.8}{2400-1200} \\\\= 18.056 \ m/s \ South[/tex]

initial velocity of Hunter, u = 45 km/h South = 12.5 m/s South

time for this motion, [tex]t_i[/tex] = 10 minutes = 600 seconds

⇒initial displacement of Hunter, [tex]x_i[/tex] = (12.5 m/s) x (600 s) = 7500 m

Final velocity of Hunter, v =  40 km/h east = 11.11 m/s east

time at Hunter's final position, [tex]t_f[/tex] = 30 minutes + [tex]t_i[/tex] = 30 minutes + 10 minutes

time at Hunter's final position, [tex]t_f[/tex] = 40 minutes = 2400 s

⇒Final displacement of Hunter,[tex]x_f[/tex] = (11.11 m/s) x (2400 s) = 26,664m

Average velocity of Hunter;

[tex]= \frac{x_f-x_i}{t_f-t_o} \\\\= \frac{26,664-7500}{2400-600} \\\\= 10.65 \ m/s \ east[/tex]

Answer:

ma = 48.48kg

Explanation:

To find the mass of the astronaut, you first calculate the mass of the chair by using the information about the period of oscillation of the empty chair and the spring constant. You use the following formula:

[tex]T=2\pi\sqrt{\frac{m_c}{k}}[/tex]     (1)

mc: mass of the chair

k: spring constant = 600N/m

T: period of oscillation of the chair = 0.9s

You solve the equation (1) for mc, and then you replace the values of the other parameters:

[tex]m_c=\frac{T^2k}{4\pi^2}=\frac{(0.9s)^2(600N/m)}{4\pi^2}=12.31kg[/tex]    (2)

Next, you calculate the mass of the chair and astronaut by using the information about the period of the chair when the astronaut is sitting on the chair:

T': period of chair when the astronaut is sitting = 2.0s

M: mass of the astronaut plus mass of the chair = ?

[tex]T'=2\pi\sqrt{\frac{M}{k}}\\\\M=\frac{T'^2k}{4\pi^2}=\frac{(2.0s)^2(600N/m)}{4\pi^2}\\\\M=60.79kg[/tex] (3)

Finally, the mass of the astronaut is the difference between M and mc (results from (2) and (3)) :

[tex]m_a=M-m_c=60.79kg-12.31kg=48.48kg[/tex]

The mass of the astronaut is 48.48 kg

Answer:

The highest electric field is experienced by a 2 C charge acted on by a 6 N electric force. Its magnitude is 3 N.

Explanation:

The formula for electric field is given as:

E = F/q

where,

E = Electric field

F = Electric Force

q = Charge Experiencing Force

Now, we apply this formula to all the cases given in question.

A) A 2C charge acted on by a 4 N electric force

F = 4 N

q = 2 C

Therefore,

E = 4 N/2 C = 2 N/C

B) A 3 C charge acted on by a 5 N electric force

F = 5 N

q = 3 C

Therefore,

E = 5 N/3 C = 1.67 N/C

C) A 4 C charge acted on by a 6 N electric force

F = 6 N

q = 4 C

Therefore,

E = 6 N/4 C = 1.5 N/C

D) A 2 C charge acted on by a 6 N electric force

F = 6 N

q = 2 C

Therefore,

E = 6 N/2 C = 3 N/C

E) A 3 C charge acted on by a 3 N electric force

F = 3 N

q = 3 C

Therefore,

E = 3 N/3 C = 1 N/C

F) A 4 C charge acted on by a 2 N electric force

F = 2 N

q = 4 C

Therefore,

E = 2 N/4 C = 0.5 N/C

The highest field is 3 N, which is found in part D.

A 2 C charge acted on by a 6 N electric force

Answer:

6 gallons

Explanation:

At 30 mph, the fuel mileage is 25 mpg.

After 5 hours, the distance traveled is:

30 mi/hr × 5 hr = 150 mi

The amount of gas used is:

150 mi × (1 gal / 25 mi) = 6 gal

The question is incomplete. Here is the complete question.

Calculate the maximum deceleration  of a car that is heading down a 14° slope (one that makes an anlge of 14° with the horizontal) under the following road conditions. You may assum that the weight of the car is evenlydistributed on all four tires and that the sttic coefficient of friction is involved - that is, the tires are not allowed to slip during the deceleration. (Ignore rolling) Calculate for a car: (a) On a dry concrete. (b) On a wet concrete. (c) On ice, assuming that μs = 0.100, the same as for shoes on ice.

Answer: (a) a = - 11.05 m/s²; (b) a = - 10.64 m/s²; (c) a = - 9.84m/s²

Explanation: The image in the attachment describe the forces acting on the car. Observing that, we know that:

[tex]F_{net}[/tex] = - [tex]W_x[/tex] - [tex]f_s[/tex]

The [tex]W_x[/tex] is a x-component of force due to gravity (W) and, in this case, is given by: [tex]W_x[/tex] = W.sin(14)

W is described as: W = m.g

Force due to friction ([tex]f_s[/tex]) is given by: [tex]f_s[/tex] = μs.N

N is the normal force and, in the system, is equivalent of [tex]W_y[/tex], so:

[tex]W_y[/tex] = m.g.cos(14)

Therefore, the formula will be:

[tex]F_{net}[/tex] = - [tex]W_x[/tex] - [tex]f_s[/tex]

m.a = - (m.g.sin14) - (μs.mg.cos14)

a = - g (sin14 + μscos 14)

a) For dry concrete, μs = 1:

a = - g (sin14 + μscos 14)

a = - 9.8 (sin14 + 1.cos14)

a = - 11.05 m/s²

b) For wet concrete, μs = 0.7:

a = - g (sin14 + μscos 14)

a = - 9.8 (sin 14 + 0.7.cos14)

a = - 10.64 m/s²

c) For ice, μs = 0.1:

a = - g (sin14 + μscos 14)

a = - 9.8 (sin14 + 0.1cos14)

a = - 9.84 m/s²

Answer:

The correct option is D: "The small car and the truck experience the same average force."

Explanation:

The magnitude of the average force experienced by both bodies in motion is the same as explained by Newton's third law of motion. The force exerted by each body is equal and opposite in direction. The resulting acceleration experienced by each vehicle, however, will not be the same. It is greater for the small car.

Answer:

B. energy

Explanation:

A vector has direction.

Energy does not have a direction.

Answer:

It will be A. So since its 2 times more the kinetic energy. But then you have to square it 2^2 = 4

Answer:

The power is  [tex]P_p = 4.6 \ W[/tex]

Explanation:

From the question we are told that

   The power delivered is  [tex]P_{s} = 1.15 \ W[/tex]

   Let it resistance be denoted as R

    The resistors are connected in series so the equivalent resistance is  

     [tex]R_{eqv} = R+ R = 2 R[/tex]

Considering when it is connected in series    

Generally power is mathematically represented as

     [tex]P_s = V * I[/tex]

Here I is the current which is mathematically represented as

       [tex]I = \frac{V}{2R}[/tex]

The power becomes

     [tex]P_s = V * \frac{V}{2R}[/tex]

     [tex]P_s = \frac{V^2}{2R}[/tex]

substituting value

    [tex]1.15 = \frac{V^2}{2R}[/tex]

Considering when resistance is connected in parallel

  The equivalent resistance becomes

    [tex]R_{eqv} = \frac{R}{2}[/tex]

So The current  becomes

       [tex]I = \frac{V}{\frac{R}{2} } = \frac{2V}{R}[/tex]

And the power becomes

     [tex]P_p = V * \frac{2V}{R} = \frac{2V^2}{R} = \frac{4 V^2}{2 R} = 4 * P_s[/tex]

 substituting values

     [tex]P_p = 4 * 1.15[/tex]

     [tex]P_p = 4.6 \ W[/tex]

Answer:

A. Ein = 8.05*10^-4 V/m

B. Clockwise sense

Explanation:

A. the magnitude of the electric field induced in the ring is obtaind by using the following formula:

[tex]\int E_{in} \cdot ds=-\frac{d\Phi_B}{dt}[/tex]            (1)

Ein: induced electric field

ds: differential of a path of the ring

ФB: magnetic flux in the ring

The Ein vector is parallel to ds in the complete ring. Furthermore, the area of the ring is constant, hence, you have in the equation (1):

[tex]\int E_{in}ds=E_{in}(2\pi r)=-A\frac{dB}{dt}\\\\E_{in}=-\frac{A}{2\pi r}\frac{dB}{dt}[/tex]   (2)

dB/dt = -0.280T/s     (it is decreasing)

A: area of the ring = π(r/2)^2= (π/4) r^2

r: radius of the ring = 4.60/2 = 2.30 cm

Then, you replace the values of all variables in the equation (2):

[tex]E_{in}=-\frac{(\pi/4)r^2}{2\pi r}\frac{dB}{dt}=\frac{r}{8}\frac{dB}{dt}\\\\E_{in}=-\frac{0.0230m}{8}(-0.280T)=8.05*10^{-4}\frac{V}{m}[/tex]

hence, the induced electric field is 8.05*10^-4 V/m

B. The induced current in the ring produced a magnetic field that is opposite to the magnetic field of the magnet. The, in this case you have that the induced current is in a clockwise sense.

Answer:

t = 25.5 min

Explanation:

To know how many minutes does Richard save, you first calculate the time that Richard takes with both velocities v1 = 65mph and v2 = 80mph.

[tex]t_1=\frac{x}{v_1}=\frac{150mi}{65mph}=2.30h\\\\t_2=\frac{x}{v_2}=\frac{150mi}{80mph}=1.875h[/tex]

Next, you calculate the difference between both times t1 and t2:

[tex]\Delta t=t_1-t_2=2.30h-1.875h=0.425h[/tex]

This is the time that Richard saves when he drives with a speed of 80mph. Finally, you convert the result to minutes:

[tex]0.425h*\frac{60min}{1h}=25.5min=25\ min\ \ 30 s[/tex]

hence, Richard saves 25.5 min (25 min and 30 s) when he drives with a speed of 80mph

Answer:

Explanation:

1 ) Since it is a isochoric process , heat energy passed into gas

= n Cv dT , n is no of moles of gas , Cv is specific heat at constant volume and dT is rise in temperature .

= 7.4 x 12.47 x ( 500 - 300 )

= 18455.6 J.

2 ) Since there is no change in volume , work done by the gas is constant.

3 ) from  , gas law equation

PV = nRT

P = nRT / V

= 7.4 x 8.3 x 500 / .74

= .415 x 10⁵ Pa.

4 ) Average kinetic energy  of gas molecules after attainment of final temperature

= 3/2 x R/ N x T

= 1.5 x 1.38  x 10⁻²³ x 500

= 1.035 x 10⁻²⁰ J

1/2 m v² = 1.035 x 10⁻²⁰

v² = 2 x 1.035 x 10⁻²⁰ / 1.39 x 10⁻²⁶

= 1.49 x 10⁶

v = 1.22 x 10³ m /s

5 )  In this process , pressure remains constant

gas is cooled from 500 to 300 K

heat will be withdrawn .

heat withdrawn

= n Cp dT

= 7.4 x 20.79 x 200

= 30769.2 J .

6 )

gas will have reduced volume due to cooling

reduced volume = .74 x 300 / 500

= .444 m³

change in volume

= .74 - .444

= .296 m³

work done on the gas

= P x dV

pressure x change in volume

= .415 x 10⁵ x .296

= 12284 J.

Answer:

-2.24 m/s²

Explanation:

Given:

v₀ = 20 mi/hr = 8.94 m/s

v = 0 m/s

t = 4.0 s

Find: a

v = v₀ + at

0 m/s = 8.94 m/s + a (4.0 s)

a = -2.24 m/s²

Answer: 10m

Explanation:

The magnitude of the vector would be 10

[tex]\sqrt{6^{2}+8^{2} } =10[/tex]

Answer:

Explanation:

  a )

from lens makers formula

[tex]\frac{1}{f} =(\mu-1)(\frac{1}{r_1} -\frac{1}{r_2})[/tex]

f is focal length , r₁ is radius of curvature of one face and r₂ is radius of curvature of second face

putting the values

[tex]\frac{1}{1.8} =(1.38-1)(\frac{1}{.5} -\frac{1}{r_2})[/tex]

1.462 = 2 - 1 / r₂

1 / r₂ = .538

r₂ = 1.86 cm .

= 18.6 mm .

b )

object distance u = 25 cm

focal length of convex lens  f  = 1.8 cm

image distance  v   = ?

lens formula

[tex]\frac{1}{v} - \frac{1}{u} = \frac{1}{f}[/tex]

[tex]\frac{1}{v} - \frac{1}{-25} = \frac{1}{1.8}[/tex]

[tex]\frac{1}{v} = \frac{1}{1.8} -\frac{1}{25}[/tex]

.5555 - .04

= .515

v = 1.94 cm

c )

magnification = v / u

= 1.94 / 25

= .0776

size of image = .0776 x size of object

= .0776 x 10 mm

= .776 mm

It will be a real image and it will be inverted.

Answer:

F = 0.314 N

Explanation:

In order to calculate the applied force to the ball by the ground, you first calculate the speed of the ball just before it hits the ground. You use the following formula:

[tex]v^2=v_o^2+2gy[/tex]        (1)

y: height from the ball starts its motion = 1.8 m

vo: initial velocity = 0 m/s

g: gravitational acceleration =  9.8 m/s^2

v: final velocity of the ball = ?

You replace the values of the parameters in the equation (1):

[tex]v=\sqrt{2gy}=\sqrt{2(9.8m/s^2)(1.8m)}=5.93\frac{m}{s}[/tex]

Next, you take into account that the force exerted by the ground on the ball is given by the change, on time, of the linear momentum of the ball, that is:

[tex]F=\frac{\Delta p}{\Delta t}=m\frac{\Delta v}{\Delta t}=m\frac{v_2-v_1}{\Delta t}[/tex]      (2)

m: mass of the ball = 20g = 20*10^-3 kg

v1: velocity of the ball just before it hits the ground = 5.93m/s

v2: velocity of the ball after it impacts the ground (80% of v1):

0.8(5.93m/s) = 4.75 m/s

Δt: time interval o which the ground applies the force on the ball = 75*10^-3 s

You replace the values of the parameters in the equation (2):

[tex]F=(20*10^{-3}kg)\frac{4.75m/s-5.93m/s}{75*10^{-3}s}=-0.314N[/tex]

The minus sign means that the force is applied against the initial direction of the motion of the ball.

The applied force by the ground on the bouncy ball is 0.314 N

Complete Question

A small car and an SUV are at a stoplight. The car has amass equal to half that of the SUV, and the SUV's engine can produce a maximum force equal to twice that of the car. When the light turns green, both drivers floor it at the same time. Which vehicle pulls ahead of the other vehicle after a few seconds?

a) It is a tie.

b) The SUV

c) The car

Answer:

The correct option is  a

Explanation:

From the question we are told that

     The mass of the car is [tex]m_c[/tex]

     The force of the car is  F

       The mass of the SUV is  [tex]m_s = 2 m_c[/tex]

       The force of the SUV is [tex]F_s = 2 F[/tex]

Generally force  of the car is mathematically represented as

        [tex]F= m_ca_c[/tex]

[tex]a_c[/tex] is acceleration of the car

Generally force  of the car is mathematically represented as

       [tex]F_s = m_s * a_s[/tex]

[tex]a_s[/tex] is acceleration of the SUV

=>   [tex]2 F = 2 m_c a_s[/tex]

       [tex]F = m_c a_s[/tex]

=>    [tex]m_c a_s = m_ca_c[/tex]

So  [tex]a_s = a_c[/tex]

  This means that the acceleration of both the car and the SUV are the same

Answer:

6.4 m/s

Explanation:

From the question, we are given that

Speed of the river, v(r) = 5 m/s

velocity relative to the water, v(w) = 4 m/s

Width of the river, d = 780 m

The magnitude of his velocity relative to the earth is v(m)

v(m) can be gotten by using the relation

[v(m)]² = [v(w)]² + [v(r)]²

[v(m)]² = 4² + 5²

[v(m)]² = 16 + 25

[v(m)]² = 41

v(m) = √41

v(m) = 6.4 m/s

thus, the magnitude of the velocity relative to earth is 6.4 m/s

Answer:

32mi

Explanation:

If 1lb contains 3,500 Cal

It means the number of hours required to burn 3500cal would be;

3500/331 = 10.57hours

But a brisk walk is 3.0 mi/h,

It means a distance of 3.0 × 10.57 mi would be covered = 31.71 miles

32miles{ approximated to the nearest whole}

Note Distance = speed × time

Answer:weight

Explanation:weight

Answer:

The difference between AC and DC lies in the direction in which the electrons flow. In DC, the electrons flow steadily in a single direction, or "forward." In AC, electrons keep switching directions, sometimes going "forward" and then going "backward."

Answer:

Approximately [tex]0.608[/tex] (assuming that [tex]g = 9.81\; \rm N\cdot kg^{-1}[/tex].)

Explanation:

The question provided very little information about this motion. Therefore, replace these quantities with letters. These unknown quantities should not appear in the conclusion if this question is actually solvable.

This answer will approach this question in two steps:

For simplicity, let [tex]a_{T}[/tex] represent the tangential acceleration ([tex]1.90\; \rm m \cdot s^{-2}[/tex]) of this car.

The question gave no information about the distance that the car has travelled before it skidded. However, information about the angular displacement is indeed available: the car travelled (without skidding) one-quarter of a circle, which corresponds to [tex]90^\circ[/tex] or [tex]\displaystyle \frac{\pi}{2}[/tex] radians.

The angular acceleration of this car can be found as [tex]\displaystyle \alpha = \frac{a_{T}}{r}[/tex]. ([tex]a_T[/tex] is the tangential acceleration of the car, and [tex]r[/tex] is the radius of this circular track.)

Consider the SUVAT equation that relates initial and final (tangential) velocity ([tex]u[/tex] and [tex]v[/tex]) to (tangential) acceleration [tex]a_{T}[/tex] and displacement [tex]x[/tex]:

[tex]v^2 - u^2 = 2\, a_{T}\cdot x[/tex].

The idea is to solve for the final angular velocity using the angular analogy of that equation:

[tex]\left(\omega(\text{final})\right)^2 - \left(\omega(\text{initial})\right)^2 = 2\, \alpha\, \theta[/tex].

In this equation, [tex]\theta[/tex] represents angular displacement. For this motion in particular:

Solve this equation for [tex]\omega(\text{final})[/tex] in terms of [tex]a_T[/tex] and [tex]r[/tex]:

[tex]\begin{aligned}\omega(\text{final}) &= \sqrt{2\cdot \frac{a_T}{r} \cdot \frac{\pi}{2}} = \sqrt{\frac{\pi\, a_T}{r}}\end{aligned}[/tex].

Let [tex]m[/tex] represent the mass of this car. The centripetal force at this moment would be:

[tex]\begin{aligned}F_C &= m\, \omega^2\, r \\ &=m\cdot \left(\frac{\pi\, a_T}{r}\right)\cdot r = \pi\, m\, a_T\end{aligned}[/tex].

Since the track is flat (not banked,) the only force on the car in the horizontal direction would be the static friction between the tires and the track. Also, the size of the normal force on the car should be equal to its weight, [tex]m\, g[/tex].

Note that even if the size of the normal force does not change, the size of the static friction between the surfaces can vary. However, when the car is just about to skid, the centripetal force at that very moment should be equal to the maximum static friction between these surfaces. It is the largest-possible static friction that depends on the coefficient of static friction.

Let [tex]\mu_s[/tex] denote the coefficient of static friction. The size of the largest-possible static friction between the car and the track would be:

[tex]F(\text{static, max}) = \mu_s\, N = \mu_s\, m\, g[/tex].

The size of this force should be equal to that of the centripetal force when the car is about to skid:

[tex]\mu_s\, m\, g = \pi\, m\, a_{T}[/tex].

Solve this equation for [tex]\mu_s[/tex]:

[tex]\mu_s = \displaystyle \frac{\pi\, a_T}{g}[/tex].

Indeed, the expression for [tex]\mu_s[/tex] does not include any unknown letter. Let [tex]g = 9.81\; \rm N\cdot kg^{-1}[/tex]. Evaluate this expression for [tex]a_T = 1.90\;\rm m \cdot s^{-2}[/tex]:

[tex]\mu_s = \displaystyle \frac{\pi\, a_T}{g} \approx 0.608[/tex].

(Three significant figures.)

Answer:

a) 98 m/s

b) 19.6 s

c)  1449.8 m

d)  29.6 s

e)  168.6 m/s

f)  46.8 s

Explanation:

Given that

Acceleration of the rocket, a = 5 m/s²

Altitude of the rocket, s = 960 m

a)

Using the equation of motion

v² = u² + 2as, considering that the initial velocity, u is 0. Then

v² = 2as

v = √2as

v = √(2 * 5 * 960)

v = √9600

v = 98 m/s

b)

Using the equation of motion

S = ut + ½at², considering that initial velocity, u = 0. So that

S = ½at²

t² = 2s/a

t² = (2 * 960) / 5

t² = 1920 / 5

t² = 384

t = √384 = 19.6 s

c)

Using the equation of motion

v² = u² + 2as, where u = 98 m/s, a = -9.8 m/s², so that

0 = 98² + 2(-9.8) * s

9600 = 19.6s

s = 9600/19.6

s = 489.8 m

The maximum altitude now is

960 m + 489.8 m = 1449.8 m

d)

Using the equation of motion

v = u + at, where initial velocity, u = 98 m, a = -9.8 m/s. So that

0 = 98 +(-9.8 * t)

98 = 9.8t

t = 98/9.8

t = 10 s

Total time then is, 10 + 19.6 = 29.6 s

e) using the equation of motion

v² = u² + 2as, where initial velocity, u = o, acceleration a = 9.8 m/s, and s = 1449.8 m. So that,

v² = 0 + 2 * 9.8 * 1449.8

v² = 28416.08

v = √28416.08

v = 168.6 m/s

f) using the equation of motion

S = ut + ½at², where s = 1449.8 m and a = 9.8 m/s

1449.8 = 0 + ½ * 9.8 * t²

2899.6 = 9.8t²

t² = 2899.6/9.8

t² = 295.88

t = √295.88

t = 17.2 s

total time in air then is, 17.2 + 29.6 = 46.8 s

Answer:

0

Explanation:

if the volume remains constans, the works is 0 because the equation

W = P . ∆V

P = pressure

∆V = change in volume

Answer:

The minimum frequency of the coil is 7.1 Hz

Explanation:

Given;

number of turns, N = 200 turns

cross sectional area, A = 300 cm² = 300 x 10⁻⁴ m²

magnitude of magnetic field strength, B = 30 x 10⁻³ T

maximum value of the induced emf, E = 8 V

Maximum induced emf is given as;

E = NBAω

where

ω is angular velocity (ω = 2πf)

E = NBA2πf

where;

f is the minimum frequency, measured in hertz (Hz)

f = E / (NBA2π)

f = 8 / (200 x 30 x 10⁻³  x 300 x 10⁻⁴ x 2 x 3.142)

f = 7.073 Hz

f = 7.1 Hz

Therefore, the minimum frequency of the coil is 7.1 Hz

The minimum frequency of the coil in the case when it should be rotated in a uniform 30-mT magnetic field is 7.1 Hz.

Since

number of turns, N = 200 turns

cross-sectional area, A = 300 cm² = 300 x 10⁻⁴ m²

the magnitude of magnetic field strength, B = 30 x 10⁻³ T

the maximum value of the induced emf, E = 8 V

Now

Maximum induced emf should be

E = NBAω

here,

ω is angular velocity (ω = 2πf)

Now

E = NBA2πf

here,

f is the minimum frequency

So,

f = E / (NBA2π)

f = 8 / (200 x 30 x 10⁻³  x 300 x 10⁻⁴ x 2 x 3.142)

f = 7.073 Hz

f = 7.1 Hz

Therefore, the minimum frequency of the coil is 7.1 Hz.

Learn more about frequency here: https://brainly.com/question/24470698

Answer:

[tex]\Delta p=1.3475\ kg-m/s[/tex]

Explanation:

The computation of magnitude of the change in the ball's momentum in kg · m/s is shown below:-

We represent

The ball mass =  m = 275 g = 0.275 kg

Thus it goes to the floor and resurfaces upward.

The ball hits the ground at 3.30 m/s speed that is

u = -3.30 m/s which represents the Negative since the ball hits the ground)

It rebounds at a speed of 1.60 m / s i.e. v = 1.60 m/s (positive as the ball rebounds upstream)

[tex]\Delta p=p_f-p_i[/tex]

[tex]\Delta p=m(v-u)[/tex]

[tex]\Delta p=0.275\ kg(1.60\ m/s-(-3.30\ m/s))[/tex]

[tex]\Delta p=1.3475\ kg-m/s[/tex]

Answer:2000

Explanation:

Answer: B, Companies passed on production and transportation costs to consumers

Explanation:

A higher oil price occurred when companies passed on production and transportation costs to consumers.

The oil producing companies spend so much money in producing crude oil from the reservoirs to the surface. They also spend money in processing and transporting the crude oil to the end users or consumers.

The final price of the oil depends on the total amount spent by these companies in producing the hydrocarbons.

Thus, a higher oil price occurred when companies passed on production and transportation costs to consumers.

Learn more about inflations here: https://brainly.com/question/1082634

Answer:

Vf = 78.64 m/s

Explanation:

The rocket is travelling upward at a constant acceleration of 3.99 m/s² until it runs out of fuel. So, in order to calculate its velocity at the point, where it runs out of fuel, we can simply use 3rd equation of motion:

2as = Vf² - Vi²

where,

a = acceleration = 3.99 m/s²

s = distance or height covered by rocket till fuel runs out = 775 m

Vf = Final Velocity = ?

Vi = Initial velocity = 0 m/s   (Since, rocket starts from rest)

Therefore,

2(3.99 m/s²)(775 m) = Vf² - (0 m/s)²

Vf = √(6184.5 m²/s²)

Vf = 78.64 m/s