2K3N + 3CaCl2 → 6KCl + Ca3N2

1 mol K3N = 131.301 g K3N

1 mol CaCl2 = 110.984 g CaCl2

1 mol KCl = 74.551 g KCl

1 mol Ca3N2 = 148.248 g Ca3N2

How many grams of CaCl2 would it take to make 1.5 moles of KCl?

a
110.984 g
b
83.238 g
c
54.213 g
d
166.476 g

The correct number of significant figures for (65.0×1.07)/14 is 2, for 170-3.33+24.9 is 3 and 99.670+24.52-0.3 is 4.

The critical figures of a number are the crucial or significant digits that accurately convey the meaning of that number. 6.658, for instance, has four significant digits. These huge amounts give the numbers accuracy. Additionally, they are known as significant digits. The 2, 4, 5, and last 0 of the number 0.2540 are significant. Additionally significant are the zeros before and after numerals and the decimal point. Exponential digits are not significant in scientific notation; the three significant digits in 1.12106 are 1, 1, and 2.

Given the various operations to be carried out as:

(a) (65.0×1.07)/14 = 4.9678 = 5.0

The number of significant figures = 2

(b) 170-3.33+24.9 = 191.57 = 192

The number of significant figures = 3

(c) 99.670+24.52-0.3 = 123.89 = 123.9

The number of significant figures = 4

To learn more about significant figures click here https://brainly.com/question/17396594

#SPJ4

The molarity of a solution is defined as the number of moles of solute per liter of solvent. To find the molarity of a solution containing 10g of NaOH in 500 mL of the solution, we can use the formula:

Molarity = moles of solute / liters of solvent

First we need to convert the mass of NaOH to moles. The molar mass of NaOH is 40 g/mol.

moles = mass / molar mass = 10g / 40 g/mol = 0.25 mol

Then we can calculate the molarity by using the formula above

Molarity = moles of solute / liters of solvent = 0.25 mol / (0.5 L) = 0.5 mol L^-1

The answer is c. 0.5 mol L^-1

To learn more about solution here:

https://brainly.com/question/7932885

#SPJ4

The heat of combustion of the reaction is -859 kJ/mol.

When we talk about the enthalpy of combustion, we mean the heat that is required in order to burn up the compound in the presence of oxygen. Recall that the heat of reaction is gotten by the use of the formula;

Sum of the bond energies of the reactants - Sum of the bond energies of the products

As such, we have;

[(1 * 835) + (2 * 411)] - [(2 * 799) + (2* 459)]

= (835 + 822) - (1598 + 918)

=1657 - 2516

= -859 kJ/mol

Learn more about bond energy:https://brainly.com/question/26141360

#SPJ1

When the dipoles are organized in head-to-tail; antiparallel and side-to-side geometries, polar molecules exhibit attractive dipole-dipole interactions. molecules that are polar.

Because PCl₃ is polar, dipole-dipole attractions will occur. Nonpolar F₂, ionic FeCl₂, and nonpolar CO₂. Dipoles develop in amplitude as covalent bonds get more polar, and hence dipole-dipole attractions expand in size. Dipole-dipole interactions occur when partial charges produced inside one molecule are attracted to an opposing partial charge in a neighboring molecule. Polar molecules align so that the positive end of one molecule interacts with the negative end of another.

learn more about Dipole-dipole interactions here:

brainly.com/question/30510859

#SPJ4

The actual question is:

Polar molecules have attractive dipole-dipole interactions when the dipoles are arranged in which of the following geometries?(Select all that apply)

head-to-tail; side-to-side; antiparallel; diagonal; round and round

In the presence of concentrated sulphuric acid as a catalyst, ethanol interacts with ethanol to form the ester, ethyl ethanoate. The response is gradual and reversible.

In the presence of concentrated sulphuric acid as a catalyst, ethanol interacts with ethanol to form the ester, ethyl ethanoate. The response is delayed and can be reversed. To reduce the possibility of a reverse reaction, the ester is distilled out as soon as it is generated.

Because it makes the process less unclear, all of the stages in the mechanism below are depicted as one-way reactions. The reverse reaction is performed so differently that it influences how the mechanism is stated. If you’re interested, there’s a link to ester hydrolysis farther down the page.

To learn more about  Ethanoic acid to refer:

https://brainly.com/question/28166727

#SPJ1

The atomic masses of each of the elements that make up the compound is the  following pieces of information are necessary to calculate the molar mass of a compound.

What is mass?

It is possible to quantify inertia, a fundamental property of all matter. The resistance a body of matter offers to a change in its speed or position brought on by the application of a force is effectively what it is.

What is molar mass ?

To calculate the molar mass of a compound, it is frequently necessary to sum the qualitative atomic masses (in g/mol) of each individual atom. Titanium is a good example, with a mass of 47.88 amu (or 47.88 g/mol). In 47.88 kilos of the metal, or 6.022 x 1023 atoms, there are one mole of titanium.

Therefore,  atomic masses of each of the elements that make up the compound is the  following pieces of information are necessary to calculate the molar mass of a compound.

Learn more about mass from the given link.

https://brainly.com/question/1838164

#SPJ4

The value for h of the following reaction is -126 kJ/mol. you are tasked with making 2.00 moles of NaOH. 63 kJ heat is released out of the system in the process.

Exothermic chemical reactions are those that release energy. When bonds are broken in the reactants during exothermic reactions, more energy is released when bonds are formed in the products. The reaction mixture's temperature rises as a result of exothermic reactions.

Now, consider the given equation:

2 Na₂O₂ (s) + 2 H₂O (l) → 4NaOH (s) + O₂ (g)

Given,  ΔH = -126 kJ

As we know,

4 moles of NaOH - (-126) kJ  

2 moles of NaOH - X

it means,

4 × X = (-126) × 2

⇒ 4X = -252

⇒X = -63kJ

Learn more about Exothermic chemical reactions here:

brainly.com/question/3668764

#SPJ4

The complete question is:

The value for h of the following reaction is -126 kJ/mol. you are tasked with making 2.00 moles of NaOH. how much heat is transferred into or out of the system in the process? select the answer with the sign that properly indicates the direction of heat flow.

2 Na₂O₂ (s) + 2 H₂O (l) → 4NaOH (s) + O₂ (g)

A) 252

B) 63

C) 3.9

D) 7.8

The first molecule has methyl in the second position and -OH in the third. But in the second, methyl is in position 3 and -OH is in position 2. Consequently, the compounds listed(See Picture) are constitutional isomers.

The exact pair being discussed will determine the molecular connection between the two molecules. It is hard to ascertain the connection without further background knowledge or details regarding the pair of molecules.

Structure-related isomers, stereoisomers, enantiomers, conformers, tautomers, protonation states, and other connections between molecules are examples. Understanding the connection is crucial in areas like pharmaceutical chemistry and materials science since it will alter the characteristics and reactivity of the molecules. With the information available, it is impossible to establish the link between the two molecules. It would be essential to know more about the characteristics, chemical structure, and bonding of the two molecules in order to identify their connection. It is impossible to ascertain their relationship without this information.

learn more about molecule here:

brainly.com/question/19556990

#SPJ4

The complete question is:

What is the molecular relationship between the pair of molecules below (See Picture)?

Boiling point  is -85°C , this implies that above this temperature HCl will be in gaseous phase.

Here melting point is -114.8°C , this implies that below this temperature HCl will be in solid phase.

Now, Boiling point  is -85°C , this implies that above this temperature HCl will be in gaseous phase.

Solid -------> -114.8°C ------> Liquid -------> -85.1°C --------> gaseous

A :- Temperature -131°C  here HCl will be present in solid state, and molecules will present in orderly fashion.

B :- Temperature -98°C  here HCl will be present in Liquid state, and molecules will present in less orderly fashion.

C :- Temperature -53°C  here HCl will be present in gaseous state, and molecules will present far apart.

To learn more about melting points and boiling points, here

https://brainly.com/question/25777663

#SPJ4

We must count the moles of each reactant and divide this amount by the reactant's psychometric coefficient in order to identify the limiting reactant.

The limiting reactant would have the lowest value.

S (32 g/mol), Divide the amount of moles of S (5/32 = 0.15625) by the psychometric factor, 1 to get 0.15625.

For H2SO4, Divide the number of moles of H2SO4 by the psychometric coefficient,2 which comes to 0.02551.

Therefore the limiting reactant is H2SO4.

Mass of each product once the limiting reactant has been completely used up.

Mass of H2O = 0.0510 mol H2SO4 * (2 mol H2O/ 2 mol H2SO4) * (18 g H2O/ 1 mol H2O) * 0.918 mol H2O = 0.918 g H2O.

Mass of SO2 is equal to 0.0510 mol H2SO4 * (3 mol SO2/ 2 mol H2SO4) * (64 g SO2/ 1 mol SO2) * (4.896 g).

To know more about Reactant

https://brainly.com/question/2288378

#SPJ4

ampicillin 500 mg im q 6 hrs. supply on hand: 1 gm vial. the medication order is to give 3.0845 ml of ampicillin every

To calculate the amount of ampicillin to administer, you will need to first convert the patient's weight from pounds to kilograms. One kilogram is equal to 2.20462 pounds. So, 136 pounds is equal to 61.69 kilograms.

Next, the medication order states that the patient should receive 500 mg of ampicillin every 6 hours. To calculate the daily dosage, we can multiply the 500 mg dose by the number of doses per day (24 hours / 6 hours = 4 doses per day) which gives us 2000 mg/day.Now, we can use the patient's weight to determine the appropriate dosage per weight. The recommended dosage of ampicillin is 25-50 mg/kg/day. In this case, we will use 50mg/kg/day. So we can calculate the dosage as 50mg/kg/day * 61.69 kg = 3084.5 mg/day. To convert the dosage in mg to ml, we can use the information on the vial. The vial contains 1 gm of ampicillin, which is equal to 1000mg. So we can divide the dosage in mg by the concentration of the vial.3084.5mg/1000mg = 3.0845ml. Therefore the medication order is to give 3.0845 ml of ampicillin every.

Learn more about ampicillin here:

https://brainly.com/question/14867144

#SPJ4

The chemist added 0.1424 g of barium chlorate to the flask.

To calculate the mass of barium chlorate added to the reaction flask, we need to use the formula: mass = molarity x volume x molar mass.

First, we need to find the molar mass of barium chlorate. The molar mass is calculated by adding the molar masses of all the atoms in the compound.

The formula for barium chlorate is Ba(CIO₃)₂, which means it is made up of one barium atom (Ba), two chlorine atoms (Cl), six oxygen atoms (O), and two iodine atoms (I).

The molar mass of barium is 137.327 g/mol, chlorine is 35.453 g/mol, oxygen is 15.999 g/mol, and iodine is 126.904 g/mol.

So the molar mass of barium chlorate is (137.327 + 235.453 + 615.999 + 2×126.904) g/mol = 479.205 g/mol.

Next, we need to use the formula mass = molarity x volume x molar mass. We know that the molarity is 0.122 M, the volume is 265.0 mL and the molar mass is 479.205 g/mol. So we can plug these values into the formula: mass = 0.122 x 0.265 x 479.205.

After converting the volume to L and using the formula, we get 0.1220.265479.205 = 0.1424 g.

So the chemist added 0.1424 g of barium chlorate to the flask.

Learn more about barium chlorate at

https://brainly.com/question/30010074

#SPJ4

The correct order is iodine>bromine> chlorine. As we move down the halogens the London dispersion forces increase.

London dispersion forces are the intermolecular forces that hold the molecules together. It is one of the van der Waal forces and is sometimes known as induced dipole- induced dipole attraction. It majorly works for noble gases like argon, and neon. In the case of halogens, as we move down the size of the atoms increases and the van der Waal forces become more prominent hence the London dispersion forces also increase. Therefore, iodine has the strongest dispersion force and chlorine has the weakest.

Learn more about halogens here:

https://brainly.com/question/11156152?

#SPJ4

Q: arrange the molecules by the strength of the london (dispersion) force interactions between molecules.

chlorine gas, bromine gas, iodine gas

Brass pipe is very durable, corrosion resistant, and can be used for hot-water distribution lines, but it doesn't last as long as copper piping.

To learn more about Brass, refer:

https://brainly.com/question/30265036

#SPJ4

Based on the given information, it is not possible to accurately predict which number is the predicted yield, the actual yield, and the percent yield without additional information or context. The percent yield is calculated by comparing the actual yield to the predicted yield, which are both typically measured in grams or moles.

The list of the factors that will increase the reaction rate of a chemical reaction are

The Factors that can increase the reaction rate of a chemical reaction include:

Lastly, Increasing the surface area of the reactants: as the surface area of the reactants increases, the number of reactant particles in contact with each other increases, making it more likely for them to collide and react.

Learn more about chemical reaction from

https://brainly.com/question/11231920

#SPJ1

Acids are chemical substances that are defined by a sour taste in an aqueous medium.

These acids may have the tendency to turn into blue litmus red. On the other side, bases are chemical substances that are defined by a bitter taste and are slippery to the touch.

There are some bases that are soluble in water, while others are not, there are two types of litmus paper that are available that can be used to identify acids and bases:

They are known as Red litmus paper and blue litmus paper.

A blue litmus paper changes into red under acidic conditions and red litmus paper changes into blue under basic or alkaline conditions. These chemical properties are very useful in identifying substances.

To know more about the properties of acids and bases:

https://brainly.com/question/19950738

#SPJ4

Answer:

B. a mound of sand piled up by the wind.

Explanation:

It is option B because a dune is a natural feature formed by the wind blowing sand particles and piling them up in a specific area. The wind can shape the dune and cause it to grow taller, sometimes reaching heights of 300 meters or more. Dunes are not caused by the wind blowing sand away, as stated in option A, nor are they found in wet and rainy areas, as stated in option D, they are typically found in desert regions or along coastlines. It is not a cave as stated in option C.

At 3,557 torr, 16.45 moles of methane gas are at a temperature of T=17.15 K in a 70.7 L container.

According to the ideal gas law: PV=nRT, where R=0.082 and T is temperature in Kelvin (K). P is pressure, V is volume, n is the amount in moles.

(4.68)*(4.95)=(16.45)*(0.0821)*

T=17.15, therefore calculate it.

An object that is in the gaseous, or vaporous, condition of matter, is referred to as a gas. When referring to material with characteristics of a gaseous substance, the word "gas" can also refer to the condition itself. Along with liquid, solid, and plasma, gases are one of the four natural states of matter. The shape or volume of a gas can change.

To know more about Gas visit:

https://brainly.com/question/10725862

#SPJ1

Answer:

245

Explanation:

everyone needs to chill don't answer if you can't get it right it wastes you time and others as well not trying be a hater but its true

The reaction of methyl salicylate with sodium hydroxide gives the sodium salt of salicylic acid called as sodium salicylate which can be represented as: C7H6O3 + NaOH -> C7H5O3Na + H+

With the chemical formula C7H6O3, salicylic acid is an inorganic substance that is a subclass of phenolic acid and beta-hydroxy acid (BHA). Aspirin is one of the main products made from salicylic acid, which is also known as ortho-hydroxybenzoic acid. It is a crystalline solid with a white hue that is used in the creation of numerous pharmaceutical medicines. Salicylic acid, an organic acid, dissociates to lose a proton from the carboxylic acid functional group in an aqueous solution. It appears in nature as crystals of an organic acid that are transparent and colorless. This compound's salt and ester derivatives, sometimes referred to as salicylates, are frequently utilized in organic chemistry. It combines with sodium hydroxide to produce sodium salicylate.

To learn more about methyl salicylate click here https://brainly.com/question/28571674

#SPJ4

The electron configuration for silver (Ag) is based upon the place meant of silver in the fifth row of the periodic table in the 11th column of the periodic table or the 9th column of the transition metal or d block. Therefore th electron configuration for silver must end as [tex]4d^{9}[/tex].

What is meant by electron?

[tex]1s^{2} 2s^{2} 2p^{6} 3s^{2} 3p^{6} 4s^{2} 3d^{10} 4p^{6} 5s^{2} 4d^{9}[/tex]

This notation can be written in core notation or noble gas notation by replacing the [tex]1s^{2} 2s^{2} 2p^{6} 3s^{2} 3p^{6} 4s^{2} 3d^{10} 4p^{6}[/tex]  with the noble gas [Kr].

[Kr] [tex]5s^{2} 4d^{9}[/tex]

For some of the transition metals they will actually transfer an s electron to complete the d orbital, making silver,

[Kr] [tex]5s^{1} 4d^{10}[/tex]

I hope this was helpful.

To learn more about electron refer to

https://brainly.com/question/26084288

#SPJ4

The correct order for equilibrium constant = K₁ > K₂ >K₃

What is meant by equilibrium?

On applying this concept in figures :

Given : Green = Cl₂ Brown = Br₂ Purple = I₂ Grey = Ethene

Grey + Green = 1,2- dihalide ethane

a) Number of Cl₂(green ) = 2

number of ethane ( grey ) = 2

Number of 1,2-dichloride alkane( grey + green ) = 8

Plugging these number in equilibrium constant expression :

[tex]k_{1} = 8/ 2*2=8/4=2[/tex]

Hence K₁ for ethene + chlorine = 2

b) Number of Br₂(brown ) = 4

number of ethane ( grey ) = 4

Number of 1,2-dibromide alkane( grey + brown ) = 6

On plugging these values in K expression as :

[tex]K_{2} = 6/4*4=6/16=0.0612[/tex]

Hence K₂ for ethen + Bromine = 0.375

c) Number of I₂(purple ) = 7

number of ethane ( grey ) = 7

Number of 1,2-diiodide alkane( grey + purple ) = 3

On plugging values in K expression as:

[tex]K_{3} = 3/7*7=3/49=0.0612[/tex]

Hence K₃ for ethene + Iodine = 0.0612

So , the order of equilibrium constant (K) from largest to smallest :

K₃ = 0.0612 K₂ = 0.375 K₁= 2

K₁ > K₂ >K₃

To learn more about equilibrium refer to

https://brainly.com/question/26075805

#SPJ4

C is correct. Gas Z has a smaller molar mass than gas X because of the concept of kinetic energy.

As shown in the diagram, there are two gases Z and X. It is provided in the data that the temperature of the gases are the same, which indirectly says that the kinetic energy of both gases is same. Kinetic energy is the term that defined energy stored in the particles due to their motion or velocity. Its SI unit is Joule. And its formula is [tex]\frac{1}{2}[/tex]m[tex]v^{2}[/tex] . So kinetic energy of Z= Kinetic energy of X.

Therefore, the gas with a higher molecular speed will have a lower molecular mass. And it can be seen from the graph that Z has more speed, so it will have a smaller molar mass.

Learn more about gas here:

https://brainly.com/question/3637358

#SPJ4

Q: the two gas samples represented in the graph above are at the same temperature. which of the following statements about the gases is correct?

A. Z has more kinetic energy than X

B.Fewer molecule in present in Z

C. Z has smaller molar mass

D. Z has larger molar mass

The number of grams of an element divided by the mass in grams of the compound, then multiplied by 100%, is the percent by mass of the element in the compound.

To learn more about percent refer to:

https://brainly.com/question/24877689

#SPJ4

A's concentration falls if D is removed. In this scenario, the equilibrium position will change, causing A's concentration to once again drop as a result of its reaction with B to produce more C and D.

The following is the Le Chatelier principle: A shift in the equilibrium's location cancels out the impact of a change in one of the variables that define an equilibrium in a system.

The broad statement: Kp = Kc(RT) (RT) Where n = moles of gaseous products - moles of gaseous reactants, one can derive n. Pure solids and pure liquids are not given concentration words.

To know more about equilibrium visit:-

https://brainly.com/question/29359391

#SPJ1

Answer:

12 in/1 ft and 1 ft/12 in

Explanation:

The conversion factor means the equal value of the expression.

Here in this case, "there are 12 inches in 1 foot is the statement" which means one foot contains 12 inches.

In the given options, 12 in/1 ft means 12 inches per 1 foot, and 1ft/ 12in means 1 foot for 12 inches which are technically the same.

There is a formula that supports this statement. That is

Conversion factor = Required yield / Recipe yield

or

Conversion factor= What you need/ What you have

Hence both 12in/1 ft and 1ft/ 12 in are the correct answers.

Answer:

6.22 g/mL

Explanation:

To calculate the density of an object, you divide its mass by its volume (d = m/v).

In this case, the mass of the object is 3.00 x 10^2 grams and the volume is 48.5 mL.

So the density = (mass (g)) / (volume (mL)) = (3.00 x 10^2) / (48.5) = 6.22 g/mL

Answer:

Pretty sure it's B

Explanation:

The result of the multiplication of given number in scientific notation is 1.23 × 10⁻⁵. The power of 10 is added in the muiltipication.

Scientific notation is a standard and scientific way of representing numbers. In scientific notation, the numbers are converted with powers of ten. For example a number 5 can be written as 5 × 10°. Similarly 500 can be written as  5 × 10².

The first term in the scientific notation  4.1 × 10° = 4.1 . since 10° = 1.

second terms, 3 × 10 ⁻⁶. Multiply it with 4.1

= 4.1 × 3 × 10 ⁻⁶ = 12.3 × 10 ⁻⁶ =   1.23 × 10⁻⁵.

Therefore, the final answer in scientific notation is written as: 1.23 × 10⁻⁵.The power ten is increased when we move the decimal point to the left.

Find more on scientific notation:

https://brainly.com/question/16936662

#SPJ1

Elements in the same group or family in the periodic table are called congeners. For Example, the congeners in Group 1 are Sodium, Potassioum and Lithium.

Elements in the same group or family in the periodic table have the same number of valence shell electrons in their outermost shell. Therefore, they share some of the same physical and chemical properties. They may also share their reactivity properties. When same physical and chemical properties are present in a group, it is called a trend. When an element deviates from a trend, it is called an exception.

To learn more about periodic table:

https://brainly.com/question/15987580

https://brainly.com/question/1173237

Configuration (a) - Ground state Configuration (b) - Violates Hund's Rule Configuration (c) - Violates Pauli Exclusion Principle.

Configuration is the process of setting up and fine-tuning a system to meet a user's specific needs. It is a process of organizing and customizing a system or device to meet the specific requirements of its user. This process is often used to customize a device or system to fit the user’s individual preferences, such as setting up a laptop for a specific user or configuring a complex network for a business. Configuration includes installing and configuring hardware, software, and other settings. It also involves troubleshooting any issues that may arise during the process.

Configuration (a) is a ground state. It obeys all three of the ground state rules.
Configuration (b) violates the Aufbau principle, as electrons should fill the lowest available energy levels first.
Configuration (c) violates the Pauli Exclusion principle, as each orbit can only contain two electrons with opposite spin.

To know more about configuration click-
https://brainly.com/question/26084288
#SPJ4