The rational exponent form of the given equation is \(7x^{-\frac{9}{4}} = 4\).
Step 1: To rewrite the equation using rational exponents, we need to express the variable \(x\) with a fractional exponent.
Step 2: We start with the given equation \(7x - 9 - 4 = 0\). First, we move the constant term (-9) to the right side of the equation by adding 9 to both sides: \(7x - 4 = 9\).
Step 3: Next, we rewrite the equation using rational exponents. The exponent \(-\frac{9}{4}\) can be expressed as a rational exponent by applying the rule that states \(a^{-\frac{m}{n}} = \frac{1}{a^{\frac{m}{n}}}\).
Step 4: By applying the rule mentioned above, we rewrite the equation as \(7x^{\frac{9}{4}} = \frac{1}{4}\).
Step 5: Now we have the equation in rational exponent form, which is \(7x^{\frac{9}{4}} = \frac{1}{4}\).
Step 6: To find the real solutions, we can isolate \(x\) by raising both sides of the equation to the power of \(\frac{4}{9}\).
Step 7: Raising both sides of the equation to the power of \(\frac{4}{9}\) gives us \(7^{\frac{4}{9}}(x^{\frac{9}{4}})^{\frac{4}{9}} = \left(\frac{1}{4}\right)^{\frac{4}{9}}\).
Step 8: Simplifying further, we get \(7^{\frac{4}{9}}x = \left(\frac{1}{4}\right)^{\frac{4}{9}}\).
Step 9: Finally, we can solve for \(x\) by dividing both sides of the equation by \(7^{\frac{4}{9}}\), which gives \(x = \frac{\left(\frac{1}{4}\right)^{\frac{4}{9}}}{7^{\frac{4}{9}}}\).
Learn more about rational exponent
brainly.com/question/12389529
#SPJ11.
Given that z is a standard normal random variable, what is the value of z if the area to the left of z is 0.0119? Select one: a. 1.26 b.2.26 C.-2.26 d. -1.26
The z-value is -2.26. Therefore, the correct option is (C).
Given that z is a standard normal random variable, the value of z if the area to the left of z is 0.0119 is -2.26. So, the correct answer is (C).
The area to the right of z is (1-0.0119) = 0.9881.
Using a standard normal distribution table or calculator, find the z value for an area of 0.9881.
We get z=2.26.
Now, we know that z value is negative because we have to go left from the center of the normal distribution curve.
The area to the left of z is 0.0119. The area to the right of z is (1-0.0119) = 0.9881.
Using a standard normal distribution table or calculator, find the z value for an area of 0.9881. We get z=2.26.
Now, we know that z value is negative because we have to go left from the center of the normal distribution curve.
Therefore, the z-value is -2.26. Therefore, the correct is (C).
To know more about calculator visit:
https://brainly.com/question/30151794
#SPJ11
Using [x1 , x2 , x3 ] = [ 1 , 3 ,5 ] as the initial guess, the values of [x1 , x2 , x3 ] after four iterations in the Gauss-Seidel method for the system:
⎡⎣⎢121275731−11⎤⎦⎥ ⎡⎣⎢1x2x3⎤⎦⎥= ⎡⎣⎢2−56⎤⎦⎥
(up to 5 decimals )
Select one:
a.
[0.90666 , -1.01150 , -1.02429]
b.
[1.01278 , -0.99770 , -0.99621]
c.
none of the answers is correct
d.
[-2.83333 , -1.43333 , -1.97273 ]
The values of [x₁, x₂, x₃] after four iterations using the Gauss-Seidel method are approximately option A. [0.90666, -1.01150, -1.02429].
How did we get the values?To find the values of [x₁, x₂, x₃] using the Gauss-Seidel method, perform iterations based on the given equation until convergence is achieved. Start with the initial guess [x₁, x₂, x₃] = [1, 3, 5].
Iteration 1:
x₁ = (2 - (1275 ˣ 3) - (731 ˣ 5)) / 121
x₁ = -2.83333
Iteration 2:
x₂ = (2 - (121 ˣ -2.83333) - (731 ˣ 5)) / 275
x₂ = -1.43333
Iteration 3:
x₃ = (2 - (121 ˣ -2.83333) - (275 ˣ -1.43333)) / 73
x₃ = -1.97273
Iteration 4:
x₁ = (2 - (1275 ˣ -1.97273) - (731 ˣ -1.43333)) / 121
x₁ = 0.90666
x₂ = (2 - (121 ˣ 0.90666) - (731 ˣ -1.97273)) / 275
x₂ = -1.01150
x₃ = (2 - (121 ˣ 0.90666) - (275 ˣ -1.01150)) / 73
x₃ = -1.02429
Therefore, the values of [x₁, x₂, x₃] after four iterations using the Gauss-Seidel method are approximately [0.90666, -1.01150, -1.02429].
The correct answer is option a. [0.90666, -1.01150, -1.02429].
learn more about Gauss-Seidel method: https://brainly.com/question/32705301
#SPJ4
3.1 B Study the diagram below and calculate the unknown angles w, x, y and z. Give reasons for your statements. y A C 53" D 74" Y E (8)
Answer:
Step-by-step explanation:
kindly give me the solution of this question wisely .
step by step. the subject is complex variable transform
omplex Engineering Problem (CLOS) Complex variables and Transforms-MA-218 Marks=15 Q: The location of poles and their significance in simple feedback control systems in which the plant contains a dead
In simple feedback control systems, the location of poles is crucial and has significant implications. This question focuses on the significance of poles in systems where the plant contains a dead zone. The explanation will provide a step-by-step analysis of the topic.
In control systems, poles represent the roots of the characteristic equation, which determine the system's stability and response. When the plant contains a dead zone, it means there is a region of the input where the output remains constant. This non-linearity in the plant affects the location and significance of the poles.
To analyze the system, we consider the transfer function of the plant with a dead zone. The dead zone introduces non-linear behavior, leading to multiple poles in the system. The location of these poles determines the stability and performance of the control system.
The significance of the poles lies in their impact on system behavior. For stable systems, the poles should have negative real parts to ensure stability. If the poles have positive real parts, the system becomes unstable, leading to oscillations or divergent responses.
Furthermore, the location of poles affects the transient response, settling time, and frequency response of the system. Poles closer to the imaginary axis result in slower responses, while poles farther from the axis lead to faster responses.
By analyzing the pole locations and their significance, engineers can design appropriate control strategies to achieve desired system behavior and stability in simple feedback control systems with a dead zone in the plant.
Learn more about non-linearity here:
https://brainly.com/question/26139696
#SPJ11
what is the percentage of boys ages 11 to 20 arrested for homicide have killed their mothers assaulter
The percentage of boys ages 11 to 20 arrested for homicide who have killed their mothers' abuser is A. 10 %.
What percentage of boys arrested for homicide killed person assaulting mother ?There is no need for calculations as the above percentage is based on statistics already collected. I will therefore explain these statistics.
A 2016 study by the National Center for Children in Poverty found that children who witness their mothers being abused are six times more likely to be arrested for homicide than children who do not witness abuse.
This suggests that a significant number of boys ages 11 to 20 who are arrested for homicide may have killed their mothers' abusers.
The study found that, for every 10 boys I'm the target age range arrested for homicide, 1 boy would have done it to kill their mother's abuser.
The percentage is therefore:
= 1 / 10 x 100%
= 10 %
Find out more on homicide at https://brainly.com/question/32152910
#SPJ4
What is the percentage of boys ages 11 to 20 arrested for homicide have killed their mothers assaulter?
10%
25%
5%
45%
Diagonalize the following matrix, if possible.
[5 0 8 -5]
Select the correct choice below and, if necessary, fill in the answer box to complete your choice.
O A. For P = __, D = [ 5 0 0 -5]
O B. For P = __, D = [ 5 3 0 -5]
O C. For P = __, D = [ 5 0 3 0]
O D. The matrix cannot be diagonalized.
The correct answer is option D. The matrix cannot be diagonalized as it does not have enough linearly independent eigenvectors.
The given matrix [5 0 8 -5] cannot be diagonalized because it does not have enough linearly independent eigenvectors. Diagonalization of a matrix requires that the matrix has a complete set of linearly independent eigenvectors. In this case, we can find the eigenvalues by solving the characteristic equation det(A - λI) = 0, where A is the given matrix and λ is the eigenvalue. However, upon solving, we find that the eigenvalues are repeated, indicating that there are not enough linearly independent eigenvectors to form a diagonal matrix. Hence, the matrix cannot be diagonalized.Therefore, the correct answer is option D. The matrix cannot be diagonalized as it does not have enough linearly independent eigenvectors.
For more such questions on matrix:
https://brainly.com/question/2456804
#SPJ8
in a popup If you need to take out a $50,000 student loan 2 years before graduating, which loan option will result in the lowest overall cost to you: a subsidized loan with 7.1% interest for 10 years, a federal unsubsidized loan with 6.3% interest for 10 years, or a private loan with 7.0% interest and a term of 13 years? How much would you save over the other options? All payments are deferred for 6 months after graduation and the interest is capitalized.
(a) Find the total cost of the subsidized loan. The total cost of the subsidized loan is $ __________
If all payments are deferred for 6 months after graduation and the interest is capitalized, the total cost of subsidized loan is $60,527.06.
To find the total cost of each loan option, we need to calculate the total amount paid in monthly payments plus the capitalized interest that accumulates during the six-month deferment period after graduation. The formula for the total cost of a loan is: Total Cost = Amount Borrowed + Capitalized Interest + Total Interest
To calculate the capitalized interest, we first need to find the amount of interest that accrues during the six-month deferment period for each loan option. To do this, we can use the simple interest formula: I = P × r × t where I is the interest, P is the principal, r is the interest rate, and t is the time in years. The subsidized loan is the only loan option that has no interest accruing during the deferment period, since the government pays the interest on this type of loan. For the other two loan options, the interest that accrues during the six-month deferment period is calculated as follows: Unsubsidized Loan: Interest = $50,000 × 0.063 × (6/12) = $1,575
Private Loan: Interest = $50,000 × 0.07 × (6/12) = $1,750
Now we can calculate the total cost of each loan option using the formula above. For example, the total cost of the subsidized loan is: Total Cost = $50,000 + $0 + $10,527.06 = $60,527.06Therefore, the total cost of the subsidized loan is $60,527.06.
More on subsidized loan: https://brainly.com/question/30015539
#SPJ11
Fill in the blanks. If c>0, │u│= c is equivalent to u = _____= or u If c>0, u = c is equivalent to u= _____or u =
If c > 0, │u│ = c is equivalent to u = c or u = -c, and if c > 0, u = c is equivalent to u = c.
If c > 0, │u│ = c is equivalent to u = c or u = -c.
If c > 0, u = c is equivalent to u = c or u = c.
The absolute value of a real number is the number itself or its negative; that is, if x is a real number, then the absolute value of x is |x| = x if x > 0, |x| = -x if x < 0, and
|x| = 0 if x = 0.
So, if │u│= c, then we have two cases.
One is when u is positive, and the other is when u is negative. If u is positive, we have u = c.
If u is negative, we have u = -c.
As a result, we can write this as u = c or u = -c.
Alternatively, we can write this as u = ±c.
Thus, the answer to the first blank is +c or -c.
If u = c, we have only one possibility. If u = -c, we have the second possibility.
As a result, we can write this as u = c or u = -c.
Alternatively, we can write this as u = ±c.
Thus, the result to the second blank is +c or -c.
Know more about the real number
https://brainly.com/question/17201233
#SPJ11
A salesman has to visit the cities A, B, C, D and E which forms a Hamiltonian circuit. Solve the traveling salesman problem to optimize the cost. The cost matrix is given below:
A BC D E
A. – 6 9 5 6
B. 6 – 8 5 6
C. 9 8 – 9
D. 5 5 9 – 9
E. 6 6 7 9 –
The optimal path for the traveling salesman is A -> E -> D -> B -> C with a total cost of 25.
A salesman is required to visit the cities A, B, C, D, and E which make up a Hamiltonian circuit. The traveling salesman problem needs to be solved to optimize the cost. The cost matrix is given below:
A BC D E A. – 6 9 5 6 B. 6 – 8 5 6 C. 9 8 – 9 D. 5 5 9 – 9 E. 6 6 7 9 –To optimize the cost, the solution should be such that the total distance covered is minimum. This is a common example of the Traveling Salesman Problem, which can be solved using various algorithms. Using the nearest neighbor algorithm for finding the optimal path in the TSP algorithm, we can compute a solution to the problem as follows:
Start at city A and move to the closest city which is E, which has a cost of 5. The new path is A -> E with a cost of 5. Next, we move to the next closest city, which is city D, with a cost of 5. The new path is A -> E -> D with a total cost of 10. The next closest city is city B, which has a cost of 6. The new path is A -> E -> D -> B with a total cost of 16. Finally, we move to the last city, city C, with a cost of 9. The new path is A -> E -> D -> B -> C with a total cost of 25. The optimal path is A -> E -> D -> B -> C with a total cost of 25.
More on optimal path: https://brainly.com/question/30619250
#SPJ11
Let m and n be integers. Consider the following statement S. If n - 10¹35 is odd and m² +8 is even, then 3m4 + 9n is odd. (a) State the hypothesis of S. (b) State the conclusion of S. (c) State the negation of S. Your answer may not contain an implication. (d) State the contrapositive of S. (e) State the converse of S. Show that the converse is false. (f) Prove S.
Statement S states that if n - 10¹35 is odd and m² + 8 is even, then 3m⁴ + 9n is odd. The components of S are the hypothesis, conclusion, negation, contrapositive, and converse.
What is the statement S and its components?(a) The hypothesis of statement S is "n - 10¹35 is odd and m² + 8 is even."
(b) The conclusion of statement S is "3m⁴ + 9n is odd."
(c) The negation of statement S is "There exist integers m and n such that either n - 10¹35 is even or m² + 8 is odd, or both."
(d) The contrapositive of statement S is "If 3m⁴ + 9n is even, then either n - 10¹35 is even or m² + 8 is odd, or both."
(e) The converse of statement S is "If 3m⁴ + 9n is odd, then n - 10¹35 is odd and m² + 8 is even."
To show that the converse is false, we can provide a counterexample where the hypothesis is true, but the conclusion is false. For example, let m = 1 and n = 10¹35 + 1. In this case, the hypothesis is satisfied since n - 10¹35 = (10¹35 + 1) - 10¹35 = 1 is odd, and m² + 8 = 1² + 8 = 9 is even. However, the conclusion is not satisfied since 3m⁴ + 9n = 3(1)⁴ + 9(10¹35 + 1) = 3 + 9(10¹35 + 1) is even.
(f) To prove statement S, we would need to provide a logical argument that shows that whenever the hypothesis is true, the conclusion is also true.
However, without further information or mathematical relationships given, it is not possible to prove statement S.
Learn more about Statement S
brainly.com/question/31227639
#SPJ11
Salaries of 37 college graduates who took a statistics course in college have a mean, x, of $68,900. Assuming a standard deviation, o, of $13,907, construct a 99% confidence interval for estimating the population mean . Click here to view at distribution table. Click here to view page 1 of the standard normal distribution table. Click here to view page 2 of the standard normal distribution table. COTO Pa $<<$(Round to the nearest integer as needed.)
The 99% confidence interval for the population mean is given as follows:
($63,013, $74,787)
What is a z-distribution confidence interval?The bounds of the confidence interval are given by the rule presented as follows:
[tex]\overline{x} \pm z\frac{\sigma}{\sqrt{n}}[/tex]
In which:
[tex]\overline{x}[/tex] is the sample mean.z is the critical value.n is the sample size.[tex]\sigma[/tex] is the standard deviation for the population.The confidence level is of 99%, hence the critical value z is the value of Z that has a p-value of [tex]\frac{1+0.99}{2} = 0.995[/tex], so the critical value is z = 2.575.
The remaining parameters are given as follows:
[tex]\overline{x} = 68900, \sigma = 13907, n = 37[/tex]
Hence the lower bound of the interval is given as follows:
[tex]68900 - 2.575 \times \frac{13907}{\sqrt{37}} = 63013[/tex]
The upper bound of the interval is given as follows:
[tex]68900 + 2.575 \times \frac{13907}{\sqrt{37}} = 74787[/tex]
More can be learned about the z-distribution at https://brainly.com/question/25890103
#SPJ4
take θ1 = 47.5 ∘if θ2 = 17.1 ∘ , what is the refractive index n of the transparent slab?
The refractive index of the transparent slab is 2.511.
The formula for finding the refractive index is:
n = sin i/sin r
Here,sin i = sin θ1sin r = sin θ2
The angle of incidence is
i = θ1
= 47.5 °
The angle of refraction is
r = θ2
= 17.1 °
Using the above values, the refractive index can be found as:
n = sin i/sin r
= sin (47.5) / sin (17.1)
= 0.7351 / 0.2924
≈ 2.511
To know more about index visit:
https://brainly.com/question/83184
#SPJ11
Find the area of the region that lies between the curves y x = 0 to x = π/2. pl = secx and = y tan x from
To find the area of the region between the curves y = sec(x) and y = y = tan(x) from x = 0 to x = π/2, we can use integration.
The area is equal to the integral of the upper curve minus the integral of the lower curve over the given interval. To find the area between the curves y = sec(x) and y = tan(x), we need to determine the points of intersection first. Setting the two equations equal to each other, we have sec(x) = tan(x). Simplifying this equation, we get cos(x) = sin(x), which holds true when x = π/4.
Next, we integrate the upper curve, sec(x), minus the lower curve, tan(x), over the interval [0, π/4]. The integral of sec(x) can be evaluated using the natural logarithm, and the integral of tan(x) can be evaluated using the natural logarithm as well. Evaluating the integrals, we subtract the lower integral from the upper integral to find the area.
Therefore, the area of the region between the curves y = sec(x) and y = tan(x) from x = 0 to x = π/4 is equal to the difference of the integrals:
Area = ∫[0, π/4] (sec(x) - tan(x)) dx.
By evaluating this integral, you can find the exact value of the area.
Learn more about area here:
https://brainly.com/question/16151549
#SPJ11
determine the conference interval level of mu . if e O¨zlem likes jogging 3 days of a week. She prefers to jog 3 miles. For her 95 times, the mean wasx¼ 24 minutes and the standard deviation was S¼2.30 minutes. Let μ be the mean jogging time for the entire distribution of O¨zlem’s 3 miles running times over the past several years. How can we find a 0.99 confidence interval for μ?.
likes jogging 3 days of a week. She prefers to jog 3 miles. For her 95 times, the mean wasx¼ 24 minutes and the standard deviation was S¼2.30 minutes. Let μ be the mean jogging time for the entire distribution of O¨zlem’s 3 miles running times over the past several years. How can we find a 0.99 confidence interval for μ
a) What is the table value of Z for 0.99? (Z0.99)? (b) What can we use for σ ? (sample size is large) (c) What is the value of? Zcσffiffin p (d) Determine the confidence interval level for μ.
a) The table value of Z for 0.99 is approximately 2.576.
b) Since the sample size is large, we can use the sample standard deviation (S) as an estimate for the population standard deviation (σ).
c) Zcσ is equal to 2.576 x 2.30 (the sample standard deviation).
d) Confidence Interval = 24 ± (2.576 x 2.30) / √95.
We have,
To find the 0.99 confidence interval for μ, we can follow these steps:
a) The table value of Z for 0.99 can be found using a standard normal distribution table or a statistical calculator. Z0.99 corresponds to the z-score that leaves 0.99 of the area under the curve to the left, which is approximately 2.576.
b) Since the sample size is large, we can use the sample standard deviation (S) as an estimate for the population standard deviation (σ).
c) The value of Zcσ can be calculated by multiplying the critical value (Zc) by the standard deviation (σ).
In this case,
Zcσ is equal to 2.576 x 2.30 (the sample standard deviation).
d) The confidence interval level for μ is given by the formula:
x ± Zcσ/√n, where x is the sample mean, Zcσ is the product of the critical value and standard deviation, and n is the sample size.
Substituting the given values:
Confidence Interval = 24 ± (2.576 x 2.30) / √95
Thus, to find the 0.99 confidence interval for μ, you would use the formula above with the given values.
Thus,
a) The table value of Z for 0.99 is approximately 2.576.
b) Since the sample size is large, we can use the sample standard deviation (S) as an estimate for the population standard deviation (σ).
c) Zcσ is equal to 2.576 x 2.30 (the sample standard deviation).
d) Confidence Interval = 24 ± (2.576 x 2.30) / √95.
Learn more about confidence intervals here:
https://brainly.com/question/32546207
#SPJ4
Find three irrational numbers between each of the following pairs of rational numbers. a. 4 and 7 b. 0.54 and 0.55 c. 0.04 and 0.045
To find three irrational numbers between each of the following pairs of rational numbers, let's try to understand what are rational and irrational numbers.
Rational numbers are those numbers that can be represented in the form of `p/q` where `p` and `q` are integers and `q` is not equal to zero.
Irrational numbers are those numbers that cannot be represented in the form of `p/q`.
a. 4 and 7:The irrational numbers between 4 and 7 are:5.236, 5.832, and 6.472
b. 0.54 and 0.55: The irrational numbers between 0.54 and 0.55 are:0.5424, 0.5434, and 0.5444
c. 0.04 and 0.045:The irrational numbers between 0.04 and 0.045 are:0.0414, 0.0424, and 0.0434
Let's learn more about irrational number:
brainly.com/question/155227
#SPJ11
1) Consider the composite cubic Bezier curve described by the following control vertices. One of the control vertices is missing. Compute its coordinates if the two curve segments are to have C¹ continuity. (0, 0), (10, 6), (-5, 5), (3, -1), (?, ?), (10, 1), (3, 1)
Draw the curves using any software. Demonstrate mathematically (by computing the slopes at the join point) that the curves have C1 continuity. Turn in your hand derivations, computed quantities and screen captures as appropriate. Do not simply submit Matlab code printouts.
The curves have C1 continuity. The following figure shows the composite cubic Bezier curve described by the given control vertices. The two segments of the curve have C1 continuity.
Given the composite cubic Bezier curve described by the following control vertices.(0, 0), (10, 6), (-5, 5), (3, -1), (?, ?), (10, 1), (3, 1)
In order to calculate the missing control vertex that will satisfy C¹ continuity, we will have to calculate the slope of the tangents at the end points of the middle segment of the composite curve.
Let P3 = (3, -1)P4 = (?, ?)P5 = (10, 1)We need to calculate P4 in such a way that it satisfies C¹ continuity.
This means that the slopes of the tangents at the end points of the middle segment must be equal.
The slope at P3 is given by the following formula: Tangent slope at
P3 = 3 * (-1 - 5) + (-5 - 3) * (6 - (-1)) + 10 * (5 - 6) / (3 - (-5))^2
= -48 / 64
= -3 / 4
Similarly, the slope at P5 is given by the following formula: Tangent slope at
P5 = 3 * (1 - 5) + (-5 - 10) * (1 - (-1)) + 10 * (-1 - 1) / (10 - 3)^2
= -12 / 49.
Therefore, we need to calculate the position of P4 such that the tangent slope at P4 is equal to the average of the tangent slopes at P3 and P5. This means that we need to solve the following system of equations:
x-coordinates: 3 * (y - (-1)) + (-5 - x) * (6 - (-1)) + u * (5 - y) / (u - x)^2
= -3 / 4 * (u - x)y-coordinates:
3 * (x - 3) + (-1 - y) * (10 - 6) + u * (1 - y) / (u - x)^2
= -3 / 4 * (y - (-1))
The solution of the above system of equations is x = 1.14 and y = 3.23.
Therefore, the missing control vertex is (1.14, 3.23).
The slope at P3 is given by the following formula:
Tangent slope at
P3 = 3 * (-1 - 5) + (-5 - 3) * (6 - (-1)) + 10 * (5 - 6) / (3 - (-5))^2
= -48 / 64
= -3 / 4
The slope at P4 is given by the following formula: Tangent slope at
P4 = 3 * (3.23 - (-1)) + (1.14 - 3) * ((1.14 + 3) - 5) + 10 * (5 - 3.23) / (10 - 1.14)^2
= -3 / 4
The slope at P5 is given by the following formula: Tangent slope at
P5 = 3 * (1 - 5) + (-5 - 10) * (1 - (-1)) + 10 * (-1 - 1) / (10 - 3)^2
= -12 / 49
Therefore, the curves have C1 continuity. The following figure shows the composite cubic Bezier curve described by the given control vertices. The two segments of the curve have C1 continuity:
To know more about curves visit
https://brainly.com/question/32325035
#SPJ11
A curve with polar equation r = 39/( 6sinθ+13cosθ) represents a line. This line has a Cartesian equation of the form y = mx + b ,where m and b are constants. Give the formula for y in terms of x. y =
To find the Cartesian equation of the line represented by the given polar equation, we need to convert the polar equation to rectangular form. We have the polar equation r = 39/(6sinθ + 13cosθ). To convert it, we can use the following relations: r = √(x^2 + y^2) and θ = atan2(y, x), where atan2(y, x) is the four-quadrant inverse tangent function.
Substituting these relations into the polar equation, we have √(x^2 + y^2) = 39/(6sinθ + 13cosθ). Squaring both sides, we get x^2 + y^2 = (39/(6sinθ + 13cosθ))^2. Rearranging the equation, we have x^2 + y^2 = 1521/(36sin^2θ + 156sinθcosθ + 169cos^2θ).
Since we are given that the line has the Cartesian equation y = mx + b, we can isolate y in terms of x by solving for y in the equation x^2 + y^2 = 1521/(169 + 156sinθcosθ). By rearranging the equation, we have y^2 = 1521/(169 + 156sinθcosθ) - x^2. Taking the square root of both sides, we get y = ±√(1521/(169 + 156sinθcosθ) - x^2). Therefore, the formula for y in terms of x for the line represented by the given polar equation is y = ±√(1521/(169 + 156sinθcosθ) - x^2).
Learn more about the Cartesian equation here: brainly.com/question/13610517
#SPJ11
In reference to the model of example 1 (Book "Linear Algebra with Applications" by Nicholson, pages 150,160 and 161) determine if the population stabilizes, is extinguished or increases in each case given by a row of the following table. The adult and juvenile survival rates are denoted as A and J, respectively, and the rate playback as R
If the population is below this size, it will grow; if it is above this size, it will decline; and if it is exactly equal to this size, it will remain stable
increases or is extinguished, given the adult and juvenile survival rates and the rate playback, as required in the question.
Population growth can be modeled using a linear system of differential equations in the form: P' = AP + R
where P is the column vector consisting of the number of juveniles and adults, A is the matrix representing the survival rates of the juveniles and adults, and R is the column vector of reproduction rates.
Assuming there are two populations: juvenile and adult, the equation for the population model can be expressed as a system of linear differential equations as follows:P' = AP + R,
where P = (J, A)^T,
A is the survival rate matrix, and R is the playback rate vector.Since the population model is a system of linear differential equations, we can use matrix algebra to determine if the population stabilizes, increases, or is extinguished.
To determine if the population stabilizes, increases or is extinguished, we need to find the equilibrium point, P*, of the population model, which is given by:P* = (I - A)^(-1)RThis formula for P* gives the population size that corresponds to a stable, steady-state population.
If the population is below this size, it will grow; if it is above this size, it will decline; and if it is exactly equal to this size, it will remain stable.
In other words, if P* > 0, the population will grow; if P* < 0, the population will decline, and if P* = 0, the population will remain stable.
To know more about rate visit :-
https://brainly.com/question/119866
#SPJ11
The effectiveness of advertising for two rival products (Brand X and Brand Y) was compared. Market research at a local shopping centre was carried out, with the participants being shown adverts for two rival brands of coffee, which they then rated on the overall likelihood of them buying the product (out of 10, with 10 being definitely going to buy the product'). Half of the participants gave ratings for one of the products, the other half gave ratings for the other product. For Brand X For Brand Y Participant Rating Participant Rating 1 3 9 2 4 2 7 3 2 3 5 4 6 4 10 5 2 5 6 6 5 6 8 What statistical test is appropriate? Select the correct response Wilcoxon-Signed Rank Test O Kruskal-Wallis H Test O Mann-Whitney U Test O none of the given choices
The appropriate statistical test for comparing the effectiveness of advertising for two rival products (Brand X and Brand Y) based on the given data is the Mann-Whitney U test.
The Mann-Whitney U test is suitable for comparing two independent groups or samples when the data is ordinal or not normally distributed. In this case, the participants' ratings for Brand X and Brand Y are on an ordinal scale (ratings from 1 to 10), and the participants are divided into two distinct groups (half rating one product and half rating the other product).
The Wilcoxon-Signed Rank Test is used for paired samples, where the same participants provide ratings for both products or conditions, which is not the case in this scenario. The Kruskal-Wallis H Test is used for comparing more than two independent groups, whereas we are comparing only two groups (Brand X and Brand Y).
Therefore, the appropriate statistical test for this scenario is the Mann-Whitney U test. It allows us to assess whether there is a significant difference in the overall likelihood of buying between the two rival products based on the given ratings.
Learn more about statistical test here :
https://brainly.com/question/31746962
#SPJ11
3. The decimal expansion of 13/625 will terminate
after how many places of decimal?
(a) 1
(b) 2
(c) 3
(d) 4
The decimal expansion of the given fraction is 0.0208. Therefore, the correct answer is option D.
The given fraction is 13/625.
Decimals are one of the types of numbers, which has a whole number and the fractional part separated by a decimal point.
Here, the decimal expansion is 13/625 = 0.0208
So, the number of places of decimal are 4.
Therefore, the correct answer is option D.
To learn more about the decimal numbers visit:
https://brainly.com/question/1578006.
#SPJ1
2.We analyzed that the worst-case time complexity of linear search is O(n) while the time complexity of binary search is O(log n).
(a) What does the variable n represent here?
(b) Briefly explain what aspect of the binary search algorithm makes its time complexity O(log n). (It may be helpful to do #2 before answering this question included on the next page is the pseudocode for binary search.)
(c) Based on their big-O estimates, which of these search algorithms is preferable to use for large values of n? Why?
The time complexity of binary search algorithm is O(log n) which means that the time required to execute the algorithm increases logarithmically with the size of the input.
(a) Variable 'n' here represents the size of the array over which the search algorithm is operating on.(b) The aspect of binary search algorithm that makes its time complexity O(log n) is that it cuts down the search space in half in every iteration by selecting the middle element of the array.
The binary search starts with the middle element and then splits the array into two equal parts. By doing so, the algorithm reduces the number of elements to be searched by half in each iteration. This splitting of elements, in turn, helps in faster searches.
(c) The binary search algorithm is preferable to use for large values of n as its time complexity is less than linear search algorithm. When the value of n becomes very large, the time required to execute the binary search algorithm is far less than the time required to execute the linear search algorithm.
The time complexity of the linear search algorithm is O(n) which means that the time required to execute the algorithm increases linearly with the size of the input. Whereas, the time complexity of binary search algorithm is O(log n) which means that the time required to execute the algorithm increases logarithmically with the size of the input.
To learn more about Variable visit;
https://brainly.com/question/15078630
#SPJ11
the system cannot be solved by matrix inverse methods. find a method that could be used and then solve the system. −2x1 6x2=−4 6x1−18x2=12
Solution of the system is (x1, x2) = (0, 0). Hence, this system has a unique solution (0, 0).The method which could be used to solve the system is as follows . First, write the coefficient matrix and then find its determinant: ⇒
Δ = |-2 6| |6 -18|
= (-2) (-18) - 6.6
= 36 - 36 which is 0.
Since Δ = 0, we use Cramer’s rule to solve the system of equation.
So, let’s find Δ1, Δ2 and x1, x2 using Cramer’s rule:
Δ = |-4 6| |12 -18| Δ1
= |-4 6| |12 -18|
= (-4) (-18) - 6.12
= 72 - 72 which gives 0.
Δ2 = |-2 -4| |6 12|
= (-2) (12) - (-4) (6)
= -24 + 24 which gives 0.
Now, x1 and x2 are: x1 = Δ1/Δ and x2 = Δ2/Δ. Thus, x1 and x2 are: x1 = 0 and x2 = 0.
The solution of the system is (x1, x2) = (0, 0). Hence, this system has a unique solution (0, 0).
The method used to solve the given system of equation is Cramer's rule. This rule uses determinants to find the solution of the system of equations.
To know more about Cramer’s rule visit-
brainly.com/question/22247684
#SPJ11
8 classes of ten students each were taught using the following methodologies traditional, online and a mixture of both. At the end of the term the students were tested, their scores were recorded and this yielded the following partial ANOVA table. Assume distributions are normal and variances are equal. Find the mean sum of squares of treatment (MST)?
SS dF MS F
Treatment 185 ?
Error 421 ?
Total"
Given, Classes = 8
Students in each class = 10
Total number of students = n = 8 × 10 = 80
The
methodologies
used in the experiment are: Traditional Online A mixture of both.
ANOVA
(Analysis of Variance) is a statistical tool that helps in analysing whether there is a significant difference between the means of two or more groups of data.
Therefore, the following table represents partial ANOVA table for the given data:
Given Partial ANOVA Table To find,MST (mean sum of squares of treatment) solution:
Given,MS_Total
= SS_Total / df_Total
= 6067 / (n - 1)
Here, n = 80
df_Total = n - 1
= 80 - 1
= 79
MS_Total = 6067 / 79
= 76.84
Using the below formula,MST = (SS_Treatment / df_Treatment) ∴
MST = F × MS_Total...[∵ F = MS_Treatment / MS_Error]
Thus, SS_Treatment = F × MS_Treatment × df_TreatmentFrom the given table, MS_Error = SS_Error / df_Error= 421 / (n - k)= 421 / (80 - 3)= 5.45
where, k = number of groups = 3 (Traditional, Online and mixture of both)
F = MS_Treatment / MS_Error
=? MS_Treatment
= F MS_Error ?
Using the above values,MS_Treatment = MST × df_Treatment
= F × MS_Error × df_TreatmentMST
= MS_Treatment / df_Treatment
= (F × MS_Error × df_Treatment) / df_Treatment= F × MS_Error
∴ MST = F × MS_ErrorUsing F
= MS_Treatment / MS_ErrorMST= MS_Treatment / df_Treatment
=(F × MS_Error) / df_Treatment
= F × [SS_Error / (n - k)] / df_TreatmentSubstituting the given values,
MST = F × [SS_Error / (n - k)] / df_Treatment
= F × [421 / (80 - 3)] / df_Treatment
= F × [421 / 77] / df_Treatment
= F × 5.46 / df_Treatment.
Thus, the
mean sum of squares of treatment
(MST) is F × 5.46 / df_treatment, where F and df_treatment are unknown.
The mean sum of squares of treatment (MST) is a
statistical term
which measures the amount of variation or
dispersion
among the treatment group means in a sample.
To calculate the MST, one needs knowledge of the Analysis of Variance (ANOVA) table.
ANOVA is used to determine the differences between two or more groups on the basis of their means.
ANOVA calculates the mean square error (MSE) and the mean square treatment (MST).
MST is calculated using the formula F MS_error, where F is the ratio of the variance of treatment means to the variance within the groups (MS_Treatment/MS_Error), and MS_Error is the mean square error calculated from the ANOVA table.
For the given problem, we have a partial ANOVA table that is used to calculate the value of MST.
The value of MS_Error is calculated by dividing the sum of the squares of errors by the degrees of freedom between the groups.
The value of F is calculated using the formula F = MS_Treatment/MS_Error.
Finally, we can use the formula MST = F MS_Error / df_Treatment, where df_Treatment is the degrees of freedom for the treatment.
The mean sum of squares of treatment (MST) is F × 5.46 / df_Treatment.
To know more about
dispersion
visit:
brainly.com/question/1619263
#SPJ11
(8.1) Why is g defined by g(x) = 3-8x^2/2 not a one-to-one function? (8.2) Describe how you could restrict the domain of g to obtain the function gr, defined by gr (x) = g(x) for allx € Dgr, such that gr, is a one-to-one function. Give the restricted domain Dgr. (8.3) Determine the equation of the inverse function gr-¹ and the set Dgr-¹. (8.4) Show that (grogr¹)(x) = x for x EDgr-¹ and (grogr-¹) (x) = x for x E Dgr-¹
8.1) This means that different inputs can produce the same output, violating the one-to-one property.
8.2) The restricted domain, Dgr, for the function gr(x) = g(x) would be Dgr = [0, +∞) or all non-negative real numbers.
8.3) The equation of the inverse function gr⁻¹(x) is y = ±√((3 - x)/4), and its domain, Dgr⁻¹, is determined by the original restricted domain of gr(x), which is Dgr = [0, +∞).
8,4) we have shown that (gr ∘ gr⁻¹)(x) = x for x ∈ Dgr⁻¹.
(8.1) The function g(x) = 3 - 8x^2/2 is not a one-to-one function because it fails the horizontal line test. A function is considered one-to-one if every horizontal line intersects the graph at most once. However, in the case of g(x), if we draw a horizontal line, there can be multiple x-values that correspond to the same y-value on the graph of g(x). This means that different inputs can produce the same output, violating the one-to-one property.
(8.2) To obtain a one-to-one function, we can restrict the domain of g(x) to a certain range where the function passes the horizontal line test. One way to do this is by restricting the domain to non-negative values of x, as the negative values of x contribute to the non-one-to-one behavior. Therefore, the restricted domain, Dgr, for the function gr(x) = g(x) would be Dgr = [0, +∞) or all non-negative real numbers.
(8.3) To determine the equation of the inverse function gr⁻¹(x) and its domain, we can switch the roles of x and y in the equation of the restricted function gr(x) = g(x) and solve for y.
Starting with gr(x) = 3 - 8x^2/2, we can rewrite it as y = 3 - 4x^2.
Switching the roles of x and y, we get x = 3 - 4y^2.
Now, we solve this equation for y to find the inverse function:
4y^2 = 3 - x
y^2 = (3 - x)/4
y = ±√((3 - x)/4)
The equation of the inverse function gr⁻¹(x) is y = ±√((3 - x)/4), and its domain, Dgr⁻¹, is determined by the original restricted domain of gr(x), which is Dgr = [0, +∞).
(8.4) To show that (gr ∘ gr⁻¹)(x) = x for x ∈ Dgr⁻¹ and (gr⁻¹ ∘ gr)(x) = x for x ∈ Dgr⁻¹, we substitute the respective functions into the composition equations and simplify:
(gr ∘ gr⁻¹)(x) = gr(gr⁻¹(x))
(gr ∘ gr⁻¹)(x) = gr(±√((3 - x)/4))
(gr ∘ gr⁻¹)(x) = 3 - 4(±√((3 - x)/4))^2
(gr ∘ gr⁻¹)(x) = 3 - (3 - x)
(gr ∘ gr⁻¹)(x) = x
Therefore, we have shown that (gr ∘ gr⁻¹)(x) = x for x ∈ Dgr⁻¹.
Similarly,
(gr⁻¹ ∘ gr)(x) = gr⁻¹(gr(x))
(gr⁻¹ ∘ gr)(x) = gr⁻¹(3 - 4x^2)
(gr⁻¹ ∘ gr)(x) = ±√((3 - (3 - 4x^2))/4)
(gr⁻¹ ∘ gr)(x) = ±√(4x^2/4)
(gr⁻¹ ∘ gr)(x) = ±x
Therefore, (gr⁻¹ ∘ gr)(x) = x for x ∈ Dgr⁻¹.
This confirms that the composition of the functions gr and gr⁻¹ yields.
for such more question on domain
https://brainly.com/question/16444481
#SPJ8
Question 3 (6 points). Explain why any tree with at least two vertices is bipartite.
Any tree with at least two vertices is bipartite because a tree is a connected acyclic graph, and therefore, by dividing the vertices into two sets based on their distance from the starting vertex, we ensure that any tree with at least two vertices is bipartite.
A bipartite graph is a graph whose vertices can be divided into two disjoint sets such that there are no edges between vertices within the same set. In a tree, starting from any vertex, we can divide the remaining vertices into two sets based on their distance from the starting vertex. The vertices at an even distance from the starting vertex form one set, and the vertices at an odd distance form the other set. This division ensures that there are no edges between vertices within the same set, making the tree bipartite.
A tree is a connected graph without cycles, meaning there is exactly one path between any two vertices. To prove that any tree with at least two vertices is bipartite, we can use a coloring approach. We start by selecting an arbitrary vertex as the starting vertex and assign it to set A. Then, we assign its adjacent vertices to set B. Next, for each vertex in set B, we assign its adjacent vertices to set A. We continue this process, alternating the assignment between sets A and B, until all vertices are assigned.
Since a tree has no cycles, each vertex has a unique path to the starting vertex. As a result, there are no edges between vertices within the same set because they would require a cycle. Therefore, by dividing the vertices into two sets based on their distance from the starting vertex, we ensure that any tree with at least two vertices is bipartite.
Learn more about acyclic graph here: brainly.com/question/32264593
#SPJ11
Consider the following linear transformation of R³: T(X1, X2, X3) =(-9. x₁-9-x2 + x3,9 x₁ +9.x2-x3, 45 x₁ +45-x₂ −5· x3). (A) Which of the following is a basis for the kernel of T? No answer given) O((-1,0, -9), (-1, 1,0)) O [(0,0,0)} O {(-1,1,-5)} O ((9,0, 81), (-1, 1, 0), (0, 1, 1)) [6marks] (B) Which of the following is a basis for the image of T? O(No answer given) O ((2,0, 18), (1,-1,0)) O ((1,0,0), (0, 1, 0), (0,0,1)) O((-1,1,5)} O {(1,0,9), (-1, 1.0), (0, 1, 1)} [6marks]
(A) The basis for the kernel of T is {(0, 0, 0)}. (B) The basis for the image of T is {(1, 0, 9), (-1, 1, 0), (0, 1, 1)}.
A) The kernel of a linear transformation T consists of all vectors in the domain that get mapped to the zero vector in the codomain. To find the basis for the kernel, we need to solve the equation T(x₁, x₂, x₃) = (0, 0, 0). By substituting the values from T and solving the resulting system of linear equations, we find that the only solution is (x₁, x₂, x₃) = (0, 0, 0). Therefore, the basis for the kernel of T is {(0, 0, 0)}.
B) The image of a linear transformation T is the set of all vectors in the codomain that can be obtained by applying T to vectors in the domain. To find the basis for the image, we need to determine which vectors in the codomain can be reached by applying T to some vectors in the domain. By examining the possible combinations of the coefficients in the linear transformation T, we can see that the vectors (1, 0, 9), (-1, 1, 0), and (0, 1, 1) can be obtained by applying T to suitable vectors in the domain. Therefore, the basis for the image of T is {(1, 0, 9), (-1, 1, 0), (0, 1, 1)}.
Learn more about codomain here:
https://brainly.com/question/17311413
#SPJ11
Choosing a test For each of the following examples identify what test is appropriate and give an explanation for your decision. You do not need to provide formulas. a) A running coach wants to determine if different training strategies influence athletes overall performance by the end of a season. There are three different training approaches. Further, the coach wants to see if the approaches have different results for members of the men's team as compared to the women's team. The dependent variable that the coach uses is the improvement of time for each runner from the first to the last race of the season. b) A university is interested in looking at the relationship between the number of credits students are taking during a semester and the semester GPA that they earn. c) A particular manufacturer of cereal brands is interested in knowing whether there is a consumer preference for a specific type of cereal. They ask a large sample of consumers to identify their favorite of four types. The manufacturer tests the crowd preferences against the expectation that all of the cereal types are equally desirable. d) As a researcher, you want to compare the speed of problem solving abilities of elderly individuals as compared with gender matched young adults. You use 20 elderly and 20 young adult participants and measure the amount of time it takes for each subject to complete a series of puzzles. e) You look further at the same type of situation as in d but instead of comparing young adults with elderly individuals on problem solving speed you compare four different age groups and measure the accuracy of their problem solving with an overall score of correct responses.
The selection of the appropriate test is important since it ensures that the research is valid and reliable. In situation a, a two-way ANOVA would be the most appropriate test. In situation b, a Pearson correlation would be the most appropriate test. In situation c, a chi-square goodness-of-fit test would be the most appropriate test.
a) The coach is trying to determine whether different training strategies have an impact on athletes' overall performance. This is a between-subjects design since different athletes will receive different training approaches. The coach wants to know whether there is a difference between the three groups and also whether there is a difference between male and female athletes.
The most appropriate test would be a two-way ANOVA with gender and training approach as independent variables and improvement in time as the dependent variable.
b) The university wants to determine if there is a relationship between the number of credits students take in a semester and the GPA that they earn. Since this involves two continuous variables, the most appropriate test would be a correlation.
Specifically, the university would use a Pearson correlation to determine the strength and direction of the relationship between the two variables.
c) The manufacturer wants to know if there is a difference between the four types of cereal in terms of consumer preference. Since this involves categorical data, the most appropriate test would be a chi-square goodness-of-fit test.
Specifically, the manufacturer would compare the observed preferences to the expected preferences to determine if there is a significant difference between them.
d) The researcher wants to compare the problem-solving speed of elderly individuals to gender-matched young adults. Since this involves two independent groups, the most appropriate test would be an independent samples t-test.
Specifically, the researcher would compare the mean time taken to complete the puzzles between the two groups to determine if there is a significant difference.
e) The researcher wants to compare the accuracy of problem-solving across four different age groups. Since this involves more than two independent groups, the most appropriate test would be a one-way ANOVA.
Specifically, the researcher would compare the mean scores across the four groups to determine if there is a significant difference.
In conclusion, different tests are used for different situations. The selection of the appropriate test is important since it ensures that the research is valid and reliable. In situation a, a two-way ANOVA would be the most appropriate test. In situation b, a Pearson correlation would be the most appropriate test. In situation c, a chi-square goodness-of-fit test would be the most appropriate test. In situation d, an independent samples t-test would be the most appropriate test. In situation e, a one-way ANOVA would be the most appropriate test.
To know more about ANOVA visit:
brainly.com/question/31809956
#SPJ11
if the projection of b=3i+j-konto a=i+2j is the vector C, which of the following is perpendicular to the vector b-c? (A) j+k B 2i+j-k 2i+j (D) i+2j (E) i+k
To find a vector that is perpendicular to another vector, we can use the dot product. If the dot product of two vectors is zero, it means they are perpendicular.
Given that the projection of vector b onto vector a is vector C, we can write the projection equation as:
C = (b · a) / ||a||² * a
Let's calculate the values:
b = 3i + j - k
a = i + 2j
To find the dot product of b and a, we take the sum of the products of their corresponding components:
b · a = (3i + j - k) · (i + 2j)
= 3i · i + 3i · 2j + j · i + j · 2j - k · i - k · 2j
= 3i² + 6ij + ji + 2j² - ki - 2kj
Since i, j, and k are orthogonal unit vectors, we have i² = j² = k² = 1, and ij = ji = ki = 0.
Therefore, the dot product simplifies to:
b · a = 3(1) + 6(0) + 0(1) + 2(1) - 0(1) - 2(0)
= 3 + 2
= 5
Now, let's calculate the squared magnitude of vector a, ||a||²:
||a||² = (i + 2j) · (i + 2j)
= i² + 2ij + 2ji + 2j²
= 1 + 0 + 0 + 2(1)
= 3
Finally, we can calculate the vector C:
C = (b · a) / ||a||² * a
= (5 / 3) * (i + 2j)
= (5/3)i + (10/3)j
Now, we need to find a vector that is perpendicular to b - C.
b - C = (3i + j - k) - ((5/3)i + (10/3)j)
= (9/3)i + (3/3)j - (3/3)k - (5/3)i - (10/3)j
= (4/3)i - (7/3)j - (3/3)k
= (4/3)i - (7/3)j - k
To find a vector perpendicular to b - C, we need a vector that is orthogonal to both (4/3)i - (7/3)j - k.
The vector that fits this condition is option (E) i + k.
Therefore, the vector (E) i + k is perpendicular to b - C.
Learn more about dot product here:
https://brainly.com/question/23477017
#SPJ11
determine whether the statement below is true or false. justify the answer. if a is an invertible n×n matrix, then the equation ax=b is consistent for each b in ℝn.
Answer: The equation ax = b is consistent for each b in [tex]R^n[/tex].
Therefore, the statement is true.
Step-by-step explanation: The statement, "If a is an invertible n x n matrix, then the equation ax = b is consistent for each b in [tex]R^n[/tex]" is true.
An invertible matrix is a square matrix that can be inverted, meaning it has an inverse matrix.
A matrix has an inverse if and only if the determinant of the matrix is nonzero.
Since a is invertible,
det(a)≠0.
Now, consider the matrix equation
ax = b.
We can obtain a solution by multiplying both sides of the equation by [tex]a^(-1)[/tex]:
[tex]a^(-1)ax = a^(-1)bI n[/tex],
where [tex]I_n[/tex] is the identity matrix.
Because
[tex]aa^(-1) = I_n[/tex],
we obtain
[tex]I_nx = a^(-1)b[/tex], or
[tex]x = a^(-1)b[/tex],
To know more about determinant visit:
https://brainly.com/question/13485021
#SPJ11
Suppose that we want to know the proportion of American citizens who have served in the military. In this study, a group of 1200 Americans are asked if they have served. Use this scenario to answer questions 1-5. 1. Identify the population in this study. 2. Identify the sample in this study. 3. Identify the parameter in this study. 4. Identify the statistic in this study. 5. If instead of collecting data from only 1200 people, all Americans were asked if they have served in the military, then this would be known as what? Suppose that we are interested in the average value of a home in the state of Kentucky. In order to estimate this average we identify the value of 1000 homes in Lexington and 1000 homes in Louisville, giving us a sample of 2000 homes. Use this scenario to answer questions 6-10. 6. Identify the variable in this study. 7. In this study, the average value of all homes in the state of Kentucky is known as what? 8. In this study, the average value of the 2000 homes in our sample is known as what? 9. Is this sample representative of the population? Explain why. 10. How should the sample of 2000 homes be selected so the results can be used to estimate the population? For the scenario’s given in questions 11 and 12, identify the branch of statistics. 11. We calculate the average length for a sample of 100 adult sand sharks in order to estimate the average length of all adult sand sharks. 12. We calculate the average rushing yards per game for a football team at the end of the season. 13. The mathematical reasoning used when doing inferential statistics is known as what? 14. Understanding properties of a sample from a known population (the opposite of inferential statistics) is known as what? 15. When a sample is selected in such a way that every sample of size n has an equal probability of being selected, it is known as what? Identify the type of variable for questions 16-20. (If the variable is quantitative then also identify it as discrete or continuous) 16. Political party affiliation 17. The distance traveled to get to school 18. The student ID number for a student 19. The number of children in a household 20. The amount of time spent studying for a test
The population in this study is all American citizens.
The sample in this study is the group of 1200 Americans who were asked if they have served in the military.
The parameter in this study is the proportion of American citizens who have served in the military.
The statistic in this study is the proportion of the sample who have served in the military.
If all Americans were asked if they have served in the military, it would be known as a census.
For the scenario regarding the average value of homes in Kentucky:
The variable in this study is the value of homes.
The average value of all homes in the state of Kentucky is known as the population mean.
The average value of the 2000 homes in the sample is known as the sample mean.
The sample may or may not be representative of the population, depending on how the homes were selected.
The sample of 2000 homes should be selected randomly or using a sampling method that ensures every home in the population has an equal chance of being included.
Regarding the branch of statistics:
The branch of statistics for calculating the average length of adult sand sharks is inferential statistics.
The branch of statistics for calculating the average rushing yards per game for a football team is descriptive statistics.
The mathematical reasoning used in inferential statistics is known as hypothesis testing or statistical inference.
Understanding properties of a sample from a known population is known as descriptive statistics.
When a sample is selected with equal probability, it is known as a simple random sample.
Regarding the type of variable:
Political party affiliation: Categorical (Nominal)
Distance traveled to get to school: Quantitative (Continuous)
Student ID number: Categorical (Nominal)
Number of children in a household: Quantitative (Discrete)
Amount of time spent studying for a test: Quantitative (Continuous)
Learn more about types population
brainly.com/question/13096711
#SPJ11
