The particle has a charge of 2.44 x 10-8 C. when electric field at a point 27 cm from a charged particle is 105 N
What is charge?The electrical properties of particles like electrons and protons are described by charge, a fundamental property of matter. Particles with the same electric charge repel one another while those with the opposite charge attract one another. Electric charge can be positive or negative. The Coulomb (C) is the charge measurement unit, and particles' charges are typically measured in Coulombs.
E is equal to kQ/r₂, where k is the Coulomb constant, r is the distance from the particle to the point where the electric field is being measured, Q is the charge on the particle, and E is the electric field.
The electric field at a distance of 27 cm from the particle is calculated to be 105 N/C in the particle's direction. We now have:
By substituting these values into the equation for the electric field, we obtain: E = 105 N/C r = 27 cm = 0.27 m
105 N/C = (8.99 x 10⁹ N m²/C²) × Q / (0.27 m)²
Solving for Q, we get:
Q = (105 N/C) × (0.27 m)² / (8.99 x 10⁹ N m²/C²)
Q = 2.44 x 10⁻⁸ C
Therefore, the charge on the particle is 2.44 x 10⁻⁸ C.
Learn more about charge:
brainly.com/question/25923373
#SPJ1
two point charges q1515.00 nc and q2523.00 nc are separated by 35.0 cm. (a) what is the electric potential at a point midway between the charges? (b) what is the potential energy of the pair of charges? what is the significance of the algebraic sign of your answer?
The electric potential at a point midway between the charges is approximately 3.27 x 10^6 V and the potential energy of the pair of charges is 288.5 x 10^-21 J.
The total electric potential at the midpoint is the sum of these two values:
V = V1 + V2 ≈ 3.27 x 10^6 V
Therefore, the electric potential at a point midway between the charges is approximately 3.27 x 10^6 V.
At a distance of 35.0 cm, the potential energy of the charges is:
U = (9.0 x 10^9 N·m^2/C^2) * (15.00 x 10^-9 C) * (25.23 x 10^-9 C) / (0.35 m) ≈ 288.5 x 10^-21 J
The algebraic sign of the answer is negative, which means that the two charges are attracted to each other and can do work as they move closer together.
Potential energy is the energy that is stored in an object due to its position or configuration. It is a form of energy that an object possesses by virtue of its relative position or state, and it has the potential to do work. The amount of potential energy an object has is directly related to its height or position in a gravitational field.
For example, if an object is held at a certain height above the ground, it has potential energy due to the gravitational force that pulls it towards the ground. This potential energy can be converted into kinetic energy when the object is released, and it falls towards the ground. Similarly, a compressed spring, a stretched rubber band, and a charged battery are all examples of objects that have potential energy.
To learn more about Potential energyvisit here:
brainly.com/question/11749818
#SPJ4
what is the magnitude of the total force (in n) acting on the smiley face? do not type units in the answer box, or use scientific notation.
The formula below demonstrates how the mass of an item multiplied by its acceleration determines the size of the net force acting on it. When there is no net force acting on an object, it is in a condition known as equilibrium and is not moving forward.
What is the magnitude of the total force?Magnitude is the term used to describe a quantity's numerical value, which provides information on the strength of that quantity. As a result, the strength of a force is expressed by its magnitude.
When two forces of equal size are working in opposite directions—one in the east and the other in the west—the results of the two forces are not the same. Hence, both magnitude and direction must be provided in order to accurately characterize a force.
Therefore, [tex]F_n = 183.3 N[/tex] is the magnitude of the total force (in n) acting on the smiley face.
Learn more about magnitude here:
https://brainly.com/question/14452091
#SPJ4
The average person has a surface area of 1.5-2.0 m². If the person is lying on flat ground, let's assume that about 40% of the person's surface area is in contact with the ground, which would be about 0.6-0.8 m².
(a) A student with a mass of 50. kg is lying on the floor of the classroom. The area of the student that is in contact with the floor is 0.6 m². What is the pressure between the student and the floor?
(b) Mr. Bigler's bed of nails was built with approximately 3300 nails evenly spread over an area of 1.11 m². The head of each nail has an area of approximately 0.1 mm²=
1 x 10-7 m². Based on these numbers and the surface area of contact for the student
in part #6a, what is the pressure between the student and each of the nails?
(a) The pressure between the student and the floor is 817 Pa.
(b) The pressure between the student and each nail 14,848 Pa.
What is the pressure between the student and the floor?
Pressure is calculated by dividing force by area. The force exerted on the floor by the student is equal to their weight, which is the force of gravity acting on their mass.
The weight of the student can be calculated as follows:
W = mg
W = 50 kg (9.8 m/s²)
W = 490 N
So the pressure between the student and the floor can be calculated as follows:
P = F / A
P = 490 N / 0.6 m²
P = 817 Pa
To find the pressure between the student and each nail, we need to divide the student's weight by the total area of the nails' heads.
A (nails) = NA
A (nails) = 3300 x 1 x 10⁻⁷ m²
A (nails) = 0.033 m²
So the pressure between the student and each nail can be calculated as follows:
P = F / A
P = 490 N / 0.033 m²
P = 14,848 Pa
Learn more about pressure here: https://brainly.com/question/28012687
#SPJ1
10. A wheel with radius 0. 33 m and rotational
inertia 2. 0 kg. M2 spins on an axle with an
initial angular speed of 3. 0 rad/s. Friction in
the axle exerts a torque on the wheel,
causing the wheel to stop after 6. 0 s. The
average torque exerted on the wheel as it
slows down has magnitude
The average torque exerted on the wheel as it slows down has a magnitude of -1.0 Nm.
In this case, the average torque has magnitude T = Iα, where I is the rotational inertia of the wheel and α is the angular acceleration. Using the rotational kinematics equation ωf = ωi + αt, we can calculate the angular acceleration:
α = (ωf - ωi) / t
where ωf is the final angular speed, ωi is the initial angular speed, and t is the time. In this case, ωf = 0, ωi = 3.0 rad/s, and t = 6.0 s, so the angular acceleration is α = -0.5 rad/s2. Plugging this value into the equation for torque, we get
T = 2.0 kg.m2 x (-0.5 rad/s2) = -1.0 Nm.
The negative sign is showing torque is in the opposite direction of the initial angular velocity.
You can learn more about torque at: brainly.com/question/29024338
#SPJ11
2 paged essay on acceleration, speed, time, distance how they’re connected and a sport as an example
In physics, the motion of an object is described by the concepts of acceleration, speed, time, and distance. These ideas are crucial for comprehending and analyzing athletic performance in a sport like track and field.
Define acceleration.
The pace at which an object's velocity changes is known as acceleration. It gauges how rapidly an object alters its direction and speed. Acceleration is essential for sprinters in track and field to get off the starting blocks fast and attain their top speed as soon as feasible. A sprinter with a high rate of acceleration will get off to a faster start and be in a better spot on the track.
Contrarily, speed is the rate at which an object travels a predetermined distance. In track and field, competitors must cross the distance as quickly as possible in events like the 100-meter dash and the 400-meter relay. Time is a crucial element in calculating an object's speed and range. An object's speed directly relates to how long it takes it to travel a certain distance. Timing is essential for athletes to compete against one other and set personal records in track and field.
Distance is a unit of measurement for the separation between two places. Distance is a crucial component in track and field because it allows competitors to cover as much territory as possible in events like the long jump.
To learn more about velocity use link below:
https://brainly.com/question/80295?source=archive
#SPJ1
While running, how should you throw a ball with respect to you so that you can catch it yourself? a) Slightly forward b) Slightly backward c) Straight up
C) Straight up
How will you catch the ball ?If the ball is thrown vertically up, only the horizontal component of the runner and the ball will be the same, and in that case only he may catch the ball. To catch the ball, the horizontal component of the force on the ball and the runner should be the same.
The horizontal velocity component (vx) describes the influence of the velocity in displacing the projectile horizontally. The vertical velocity component (vy) describes the influence of the velocity in displacing the projectile vertically.
To know more about velocity visit:
https://brainly.com/question/30559316
#SPJ1
when less energy is radiated from a terrestrial planet, its __________ increases until a new __________ is achieved.A. Temperature; equilibriumB. size; temperatureC. equilibrium; sizeD. temperature; size
The world doesn't grow in size to reach a new temperature. Nonetheless, until a new equilibrium is reached, the temperature will rise. Thus, option A is correct.
What is Equilibrium?When competing forces or influences are in a condition of equilibrium, a stable system results from the balance that results from the conflicting influences.
A terrestrial planet's heat budget gets out of balance when it emits less energy, which causes the planet's temperature to drop. The planet must raise its temperature until it radiates energy at the same pace as it receives it in order to reach a new equilibrium.
This process, known as thermal equilibrium, occurs when the amount of energy entering and leaving the system balances out, maintaining a constant temperature. Hence, as a terrestrial planet emits less energy, its temperature rises until a new equilibrium is reached.
Therefore, when less energy is radiated from a terrestrial planet, its Temperature increases until a new equilibrium is achieved.
Learn more about equilibrium here:
https://brainly.com/question/16989820
#SPJ1
A group of students must study the oscillatory motion of a pendulum. One end of a light string is attached to the ceiling, and the other end of the string is attached to a mass hanger so that small disks of various masses may be stacked on the hanger, as shown in the figure. Question Students are provided with data in which an experiment was conducted to determine the relationship between the length of the pendulum and the period of oscillation. The data include a pendulum of length 0.5m , for which it took 81 s for the pendulum bob to oscillate 10 times. However, the experiment was conducted at a location that is not near Earth’s surface. The gravitational field strength where the experiment was conducted is most nearly Responses 0.003N/kg
The relationship between the length of the pendulum and the period of oscillation is determined by the fact that the time period T of a simple pendulum is directly proportional to the square root of length l of the pendulum i.e., T∝√l or T2∝l.
What is Oscillation?Oscillation may be characterized as the methodology of repeating variations of any quantity or measure about its equilibrium value in time. The back-and-forth swinging motion of the bob of a pendulum is known as the oscillation of a pendulum.
The length of the pendulum = 0.5 m
The time duration for 10 oscillations = 81s.
The time duration for 1 oscillation = 81/10 = 8.1 sec.
But when this experiment was conducted at a location that is not near Earth’s surface. The gravitational field may have an effect on it. Due to this, the time taken by one oscillation is increased from 8.1 or more.
Therefore, the relationship between the length of the pendulum and the period of oscillation is determined by the fact that the time period T of a simple pendulum is directly proportional to the square root of length l of the pendulum.
To learn more about Pendulum oscillation, refer to the link:
https://brainly.com/question/26449711
#SPJ1
Pleasee help me on these
answers are: 1) 239 F, 2) 7.222C, 3) 299.15K , 4) 98.6 F, 5) -205.1C
Show the formulas along with calculation of temperature conversions?Formulas for converting temperature values between different units are referred to as temperature conversions. There are numerous ways to convert temperatures. The most popular units of measurement among these are Kelvin, Celsius, and Fahrenheit. The Kelvin scale states that water has a freezing point of 273.15K and a boiling point of 373.15K. Water has a freezing point of 32°F and a boiling point of 212°F on the Fahrenheit scale. The freezing point of water is 0°C, and the boiling point is 100°C, according to the Celsius system.
(115°C × 9/5) + 32 = 239°F
(45°F − 32) × 5/9 = 7.222°C
26°C + 273.15 = 299.15K
(37°C × 9/5) + 32 = 98.6°F
68K − 273.15 = -205.1°C
To know more about temperature visit:
https://brainly.com/question/11464844
#SPJ1
whether a truck comes to a stop by crashing into a haystack or a brick wall, the stopping force is
both the same.
greater with the haystack.
greater with the brick wall..
When a truck comes to a stop by crashing into a haystack or a brick wall, the stopping force is greater with the brick wall. Stopping force is determined by the amount of friction a surface provides.
Friction is a force that acts between two objects when they come into contact with each other. It is an important force that affects our everyday life. Friction can be both beneficial and detrimental. It is beneficial in that it allows us to walk, run, drive, and even write without slipping or sliding. It also helps us to stop when we need to. On the other hand, friction can be detrimental when it causes machines to wear down, resulting in energy being wasted. Friction can also cause heat, noise, and wear on the surfaces of the two objects.
To learn more about friction:
brainly.com/question/24338873
#SPJ1
Which statement about the Native Americans in Carolina is true?
A.The Yamasee Indians left Carolina and joined the Iroquois Confederacy.
B.The Carolina settlers nearly destroyed the Cherokee tribe.
C.The Yamasee Indians joined the settlers to fight against the Cherokee.
D.The Yamasee and Tuscarora Indians left the area for new homes.
The statement that is true about the Native Americans in Carolina is (D). The Yamasee and Tuscarora Indians left the area for new homes.
In the early 1700s, the Yamasee and Tuscarora tribes, who had been allies of the British settlers in Carolina, turned against them due to various issues, such as trading problems and the settlers' increasing encroachment on their lands. The tribes launched attacks on the settlements, which led to a war that lasted for several years. The settlers ultimately defeated the tribes, and many Yamasee and Tuscarora Indians were forced to leave the area and seek new homes elsewhere. The war and subsequent displacement of Native Americans had a significant impact on the development of Carolina and the relations between the British settlers and Native American tribes.To know more about tribes visit:
https://brainly.com/question/9582616
#SPJ1
The equation below expresses the proportional relationship between an object's kinetic energy, mass, and velocity.
Kinetic energy% x mass x velocity
How did your observations confirm this equation?
Answer: I do not know what your observations were, but objects with a higher mass and objects traveling at a faster velocity have a higher kinetic energy. The reverse is true of course for less KE.
(っ◔◡◔)っ ♥
Hope this helps.
MM4343
one light-minute is the distance that light travels in one minute. how far is this, in kilometers? (recall that the speed of light is 300,000 km/s.)
One light-minute is approximately 18 million kilometers.
One light-minute is the distance that light travels in one minute, at the speed of light, which is approximately 300,000 km/s. we can simply multiply the speed of light by the number of seconds in one minute:
1 light-minute = 60 seconds x 300,000 km/s
1 light-minute = 18,000,000 km
Therefore, one light-minute is approximately 18 million kilometers.
Light is an electromagnetic wave that travels through space at a constant speed of approximately 300,000 km/s. This means that in one second, light can travel a distance of 300,000 kilometers.
300,000 km/s x 60 seconds = 18,000,000 km
To know more about One light-minute, here
https://brainly.com/question/17265421
#SPJ4
Peregrine falcons are known for their maneuvering ability. In a tight circular turn, a falcon can attain a centripetal acceleration 1.5 times the free-fall acceleration. Part A What is the radius of the turn if the falcon is flying at 22 m/s ? Express your answer with the appropriate units. ol ?
As per the question the radius of the turn is approximately 33.25 meters.
What is centripetal acceleration?An object travelling in a circular path will experience centripetal acceleration. It is always pointed in the direction of the circle's center, hence the formula:
a = v^2 / r
where a denotes the centripetal acceleration, v the object's speed, and r the circle's radius. According to this formula, the centripetal acceleration rises with the object's speed and falls with the circle's radius.
According to question:
We can start by using the centripetal acceleration formula:
a = v^2/r
where a is the centripetal acceleration, v is the velocity, and r is the radius of the turn.
In this case, we know that the centripetal acceleration is 1.5 times the free-fall acceleration, which is approximately 9.8 m/s^2. Therefore:
a = 1.5 * 9.8 m/s^2 = 14.7 m/s^2
We also know that the velocity of the falcon is 22 m/s. Plugging these values into the formula above, we get:
14.7 m/s^2 = (22 m/s)^2 / r
Solving for r, we get:
r = (22 m/s)^2 / 14.7 m/s^2 ≈ 33.25 m
Therefore, the radius of the turn is approximately 33.25 meters.
To know more about centripetal acceleration visit:
https://brainly.com/question/14465119
#SPJ4
5.Velvet is a new mom who wants to use some information to help raise her daughter. What advice can you give her on maturation, growth cycles, and critical periods?
The most critical years for a child's growth are from birth to age three. Good nutrition, emotional support, play, and language development are all variables that support development.
What does child development mean by growth and maturation?
The tangible and measurable process of development is growth. One measurable change is your physical height, which increases with time. Growth leads to the development of personality and behavioural traits, which is called maturation.
The phrase "critical period" in ethology refers to a certain period of an organism's early development when it is able to master skills necessary for survival. These factors have an effect on how systems like hearing and vision, social bonding, and language learning develop.
To learn more about critical period use link below:
https://brainly.com/question/2391797
#SPJ1
a car is traveling at 50 mi/h when the brakes are fully applied, producing a constant deceleration of 46 ft/s2. what is the distance covered before the car comes to a stop? (round your answer to one decimal place.)
The car covers approximately 599.8 feet before coming to a stop, when the brakes are fully applied with a constant deceleration of [tex]46 ft/s^2[/tex].
The problem involves finding the distance covered by a car when the brakes are fully applied and it comes to a stop. To solve this problem, we can use the equations of motion for constant acceleration.
We can solve this problem using the equations of motion for constant acceleration.
First, we need to convert the initial velocity from miles per hour to feet per second:
[tex]50 mi/h = 73.33 ft/s[/tex] (approx)
Next, we can use the following equation to find the distance covered by the car before coming to a stop:
[tex]v^2 = u^2 + 2as[/tex]
where v is the final velocity (which is zero when the car comes to a stop), u is the initial velocity [tex](73.33 ft/s)[/tex], a is the deceleration [tex](-46 ft/s^2)[/tex], and s is the distance covered.
Substituting the values, we get:
[tex]0 = (73.33 ft/s)^2 + 2(-46 ft/s^2)s[/tex]
Simplifying this equation, we get:
[tex]s = (73.33 ft/s)^2 / (2 * 46 ft/s^2) = 599.8 ft[/tex]
Therefore, the car covers approximately 599.8 feet before coming to a stop, when the brakes are fully applied with a constant deceleration of [tex]46 ft/s^2[/tex].
Learn more about deceleration here:
https://brainly.com/question/25839029
#SPJ4
How do we compare the displacement of a moving object moving from one point to another?
A pipe 1.00 m long is closed at one end. A guitar is placed near the open end of the tube and the string is plucked. The guitar string is 0.50 meters long and has a mass of 0.0010 kg. The string vibrates in its fundamental mode (1st harmonic) and produces a 1st overtone (3rd harmonic) standing wave in the closed pipe. If the speed of sound is 340 m/s, determine the tension in the guitar string.
Hint: the frequency of the vibrating guitar string is the same as the frequency produced in the closed pipe.
The tension in the guitar string is approximately 165 N.
How to determined the fundamental frequency (1st harmonic) of the closed pipeThe fundamental frequency (1st harmonic) of the closed pipe
can be determined using the formula:
f = v/2L
where
f is the frequencyv is the speed of sound L is the length of the pipeSubstituting the given values, we get:
f = 340 m/s / 2(1.00 m) = 170 Hz
The frequency of the 1st overtone (3rd harmonic) is three times the fundamental frequency, so:
f_overtone = 3f = 3(170 Hz) = 510 Hz
The tension in the guitar string can be determined using the formula:
f = 1/2L√(T/μ)
where T is the tension in the string and μ is the linear mass density (mass per unit length) of the string. The linear mass density can be determined from the given mass and length of the string:
μ = m/L = 0.0010 kg / 0.50 m = 0.0020 kg/m
Substituting the given and calculated values, we get:
510 Hz = 1/2(0.50 m)√(T/0.0020 kg/m)
Simplifying and solving for T, we get:
T = (4π^2)(0.0020 kg/m)(510 Hz)^2(0.50 m)^2 = 165 N
Therefore, the tension in the guitar string is approximately 165 N.
Learn more about fundamental frequency here : brainly.com/question/21482458
#SPJ1
Explain why elements produce their own characteristic colors when they emit photons? Calculate the frequency (Hz) and wavelength (nm) of the emitted photon when an electron drops from the n = 4 to the n = 2 level in a hydrogen atom.
(a) The colors that elements emit when they emit photons are due to the specific energies associated with different electron transitions within the element's atoms.
(b) The energy difference is 0 eV, the photon will not be emitted and there will not be a frequency or wavelength associated with it.
What is the frequency emitted?To calculate the frequency (f) and wavelength (λ) of the emitted photon, we can use the following formula:
f = E/h
where;
E is the energy difference between the two levels and h is Planck's constant.The energy difference can be calculated using the formula:
E = (13.6 eV) / n^2
where;
eV is the electron volt, n is the principle quantum number.Plugging in the values for n = 4 and n = 2, we get:
E = (13.6 eV) / 4^2 - (13.6 eV) / 2^2
= 3.4 - 3.4 eV
= 0.0 eV
Learn more about frequency here: https://brainly.com/question/10728818
#SPJ1
play the video and pause when you need to read the scale. how much does the mass decrease during heating?
Although it may appear like burning destroys matter, the same quantity, or mass, of matter remains after a campfire. It demonstrates that when wood burns, it reacts with oxygen and transforms into not just ashes, but also carbon dioxide and water vapor. The gases float out into the air, leaving just the ashes behind.
Antoine Lavoisier, a French scientist, developed the law of conservation of mass in 1789. According to the rule of conservation of mass, matter cannot be generated or destroyed in a chemical process. As wood burns, for example, the mass of the soot, ashes, and gases matches the original mass of the charcoal and oxygen when it originally reacted. As a result, the product's mass equals the reactant's mass. A reactant is a material generated by the chemical reaction of two or more elements, and a product is the substance formed as a result of a chemical reaction (Video 3.7.1). Matter and its equivalent mass cannot be generated or destroyed, but they may change forms to other things like liquids, gases, and solids.
Learn more about elements from here;
https://brainly.com/question/29265478
#SPJ4
when a microwave receiver is initially placed at w which is equidistant from the slits, a maximum in intensity is observed. the receiver is then moved towards z along a line parallel to the slits. intensity maxima are observed at x and y with one minimum between them. w, x and y are consecutive maxima. explain why intensity maxima are observed at x and y.
The route difference between the waves that microwaves travel on their way to X and Y must equal an integral multiple of the length.
Why do diffraction maxima differ in intensity?
Secondary wavelets from all areas of the slit interfere constructively, creating the central maximum. Wavelets from smaller and smaller portions of the slit produce constructive interference to create secondary maxima as n (order of the spectrum) increases. The intensity lowers as a result.
The route difference between the waves that microwaves travel on their way to X and Y must be an integral multiple of the length. Therefore, the remaining portions of the two waves must have been overlapping or colliding with one another, respectively. resulting in the maxima
To learn more about microwaves use :
https://brainly.com/question/13085297
#SPJ1
in activity 1-1, how do you expect that your position-time graph will differ from those you observed in lab 1, where you were moving with a constant velocity?
If moving with a constant velocity, the position-time graph is a straight line with a constant slope.
What is a position time graph?
A position-time graph, also known as a displacement-time graph or distance-time graph, is a visual representation of the relationship between an object's position and time. In this type of graph, the position of an object is plotted on the vertical y-axis, while the time is plotted on the horizontal x-axis.
The position of the object at a specific time is shown by a point on the graph. Connecting these points results in a line that represents the object's motion over time. The slope of this line can provide information about the object's velocity or speed.
Position-time graphs are commonly used in physics to study the motion of objects, such as in the analysis of freefall, projectile motion, and uniform circular motion. By examining changes in position over time, scientists can calculate acceleration, displacement, and other important characteristics of an object's motion.
Therefore,If moving with a constant velocity, the position-time graph is a straight line with a constant slope.
To learn more about position time graph from the given link:
https://brainly.com/question/25225415
#SPJ1
If you are moving with an accelerating velocity in Activity 1-1, then your position-time graph will be curved instead of linear.
What is velocity?Velocity is a vector quantity that measures the rate of change of an object's position. It is the rate at which an object's position changes over time and is usually expressed in terms of meters per second. Velocity can be calculated by taking the displacement of an object divided by the time it took for that displacement to occur. Velocity can also be expressed in terms of speed and direction, as it has both magnitude and direction. Velocity can be further defined as the rate at which an object's momentum changes. Momentum is the product of an object's mass and its velocity. In addition, velocity is important for understanding the physics of motion, as it is related to acceleration, which is a measure of how quickly an object's velocity changes.
The curve will be increasing at a steeper and steeper rate, indicating that your velocity is increasing.
To learn more about velocity
https://brainly.com/question/29523095
#SPJ1
Which of these would cause the most physical weathering?
A. sand being blown across a field.
B. The roots of a large tree.
C. A deep fast-moving river.
D. A shallow slow-moving river.
The most affecting physical weathering is by the roots of large trees. They are strong enough to erode rocks. Hence, option B is correct.
What is physical weathering ?Rocks, minerals, and soils disintegrate through a process known as physical weathering, sometimes known as mechanical weathering. Abrasion is the main physical weathering process.
Temperature, pressure, frost, root movement, and burrowing animals can all cause physical deterioration. For instance, physical weathering will expose more surface area through the use of cracks, speeding up the pace of deterioration.
Across the world, gorges, ravines, and valleys are formed by processes of water, ice, and wind that are loaded with silt. Here, strong roots embedded into the soil are enough to cause physical weathering.
Find more on physical weathering:
https://brainly.com/question/14426457
#SPJ1
Why are positive charges free to move around in gases and liquids but not in solids?
because its orbit is tilted with respect to the earth-sun plane, the moon spends most of its time either above or below the plane. how many times would the moon cross through the earth-sun plane each time it orbits earth? explain.
Instead of being in the same or a different location from Earth during its orbit, the Moon is often above or below the planet.
What angle does the Moon's orbit have with regard to that of the Earth?In comparison to the plane of Earth's orbit around the Sun, the Moon's orbit is tilted by around 5 degrees. This tilt causes the Moon to typically pass above or below the Sun when it is between Earth and the Sun as seen from Earth.
What is the name for the Earth's tilt angle *?The obliquity of the ecliptic, or axial tilt of the Earth, is around 23.5 degrees. This axial tilt causes the sun to shine at various angles throughout the year on various latitudes. The result is the seasons.
To know more about orbit visit:-
https://brainly.com/question/30208452
#SPJ1
A student conducts an investigation on a bar magnet with unlabeled poles. To determine which side of the magnet is north (N) or south (S), what steps can the student take?
A. The student can cut the bar magnet in half and observe the direction of the magnetic field on each individual piece.
B. The student can place the bar magnet near a nonmetal surface and observe the direction of the magnetic field on the surface.
C. The student can place the bar magnet near a metallic surface and observe the direction of the magnetic field on the surface.
D. The student can place the bar magnet near the known pole of a second magnet and observe the interaction between the poles.
Answer: D. The student can place the bar magnet near the known pole of a second magnet and observe the interaction between the poles.
Explanation: Magnets having the property that they attract the different poles and repel the same poles.
The better Investigation should be going to be conducted by the student is that by taking the known pole magnet and make the interaction with the unlabeled magnet.
step 1: choose the known magnet pole first (say S-pole).
step 2: make interaction of this pole with the any of two poles of unlabeled magnet.
step 3: if both magnets are attracting to each other, the pole will be North pole (N-pole), and if repelling to each other, the pole will be South pole(S-pole)
Now if we got the first Pole, the second will be obvious.
(since , magnets have two poles. N-pole and S-pole)
Know more about Magnetic Poles:
brainly.com/question/14997726
No one in Rohan's immediate family has cancer. What does this MOST likely mean?
OA. He will never get cancer.
OB. His mom does not have cancer-causing genes.
OC.
His dad does not have cancer-causing genes.
D.
He could possibly get cancer.
Answer:
D. He could possibly get cancer.
Explanation:
The correct answer is D. He could possibly get cancer. While having no immediate family members with cancer is a good sign, it does not guarantee that he will never get cancer. It simply means that his parents do not have any known cancer-causing genes.
Which properties most fundamentally distinguishes mechanical waves from electromagnetic waves?
Electric and magnetic fields are proportional, and transverse electromagnetic waves do exist in nature. and have oscillations that are parallel to one another and have the same phase. A medium is not necessary for electromagnetic waves to travel.
What are the properties of electromagnetic waves?Mechanical waves cannot pass through a vacuum, which is empty space, however electromagnetic waves can. They require a means of transportation, like water or air. The wave propagates in a direction that is opposite to both the magnetic and electric fields.
Two waves that are oscillating perpendicular to one another make up electromagnetic waves. One is represented by the oscillating magnetic field, while the other is represented by the oscillating electric field.
Therefore, Mechanical waves include things like pond ripples while electromagnetic waves, like light and radio signals, can move through space's vacuum.
Learn more about electromagnetic waves here:
https://brainly.com/question/16515517
#SPJ4
the resultant static force acting on a submerged inclined plane surface acts: question 7 options: at the centroid of the submerged body above the centroid of the submerged body below the centroid of the submerged body
When a body is entirely or partially submerged in a liquid, the resultant pressure force acting on the body is known as the buoyant force.
When a surface is immersed in a fluid, the pressure force that results on the body operates in all directions perpendicular to the surface. We refer to this as hydrostatic pressure. The density of the fluid and the depth of the point below the surface of the fluid both directly affect the pressure at a given place in the fluid, which is the same in all directions. The pressure also rises as the depth does buoyant force. Any point in a fluid experiences pressure in all directions, making it a scalar quantity.
The weight of the fluid above the point of interest determines this pressure, which is described as the force applied per unit area. It is referred to be an isotropic quality of fluid when the pressure at a particular place in the fluid is the same in all directions.
Learn more about buoyant force here
https://brainly.com/question/28526066
#SPJ4
in order to qualify for the finals in a racing event, a race car must achieve an average speed of 250 km/h on a track with a total length of 1600 m. if a particular car covers the first half of the track at an average speed of 230 km/h, what minimum average speed must it have in the second half of the event in order to qualify?
The minimum average speed must the car have in the second half of the event in order to qualify is 266.6km/hr.
Given the average speed of a race car (v) = 250km/hr
The total length of track (s) = 1600m = 1.6km
The initial average speed of car up to first half (v1) = 230km/h
Overall race duration divided by total average speed equals the amount of time that car can spend on the entire race.
total time(t) = 1.6/250 = 0.0064hrs
Let the time taken for first half = t1
such that t1 = 0.8/230 = 0.0034hr
The time left for second half = t2 = t - t1
t2 = 0.0064hrs - 0.0034hr = 0.003hr
The average speed for the second half of track = v2
then v2 = 0.8/t2 = 0.8/0.003 = 266.6km/hr
To learn more about speed click here https://brainly.com/question/28224010
#SPJ4
