5. Rosalind Franklin was a key figure in the discovery of the structure of DNA, yet she
was not included in the Nobel Prize which was awarded to Watson and Crick. Carry out
some research to find out how she contributed to this work and use the space below
to write up your findings​

Answer:

Osmium

Explanation:

If you take a look at the attached image of a periodic table below, you will see that the element in the 6th period and 8th group is Osmium. Hope this helps!

Answer:

The reaction is not in equilibrium and  must move in a backward manner i.e towards the reactant so that it will attain equilibrium

Explanation:

The complete question is as follows;

Consider the following reaction where Kc = 2.90×10-2 at 1150 K: 2 SO3 (g) 2 SO2 (g) + O2 (g) A reaction mixture was found to contain 4.71×10-2 moles of SO3 (g), 5.00×10-2 moles of SO2 (g), and 4.53×10-2 moles of O2 (g), in a 1.00 liter container.

Is the reaction at equilibrium? If not, what direction must it run in order to reach equilibrium? The reaction quotient, Qc, equals . The reaction A. must run in the forward direction to reach equilibrium. B. must run in the reverse direction to reach equilibrium. C. is at equilibrium.

Solution

The first thing to do here is to calculate the pressure of each of the gases. This would be useful in the equilibrium calculations. We calculate this by dividing the respective number of moles by the volume of the container.

Now, since the volume of the container is 1L, then the number of moles will be equal to the pressure of the gaseous substances, although units will be different.

So, [SO3] = 4.71 * 10^-2 mol/L

[SO2] = 5.00 * 10^-2 mol/L

[O2] = 4.53 * 10^-2 mol/L

The equation of the reaction is as follows;

[tex]2SO_{3(g)}[/tex]    ⇆    [tex]2SO_{2(g)}[/tex]   +    [tex]O_{2(g)}[/tex]

We proceed to calculate the reaction quotient Qc

Mathematically Qc for this reaction = [[tex]SO_{2}[/tex]]^2 × [[tex]O_{2}[/tex]]/ [[tex]SO_{3}[/tex]]^2

Qc = {(5 * 10^-2)^2 * (4.53 * 10^-2)}/ (4.71 * 10^-2)^2 = 5.11 × 10^-2 mol/L

Now, we are given that the value of Kc = 2.9 * 10^-2 which is less than Qc

Since Kc < Qc, the backward reaction is favored.

Now to the question;

The reaction is not in equilibrium and  must move in a backward manner i.e towards the reactant  so that it will attain equilibrium

Answer:I suppose it is mercury...

Explanation:

I don't say u must have to mark my ans as brainliest but if it has really helped u plz don't forget to thnk me...

Answer:

[HI] = 0.7126 M

Explanation:

Step 1: Data given

Kc = 54.3

Temperature = 703 K

Initial concentration of H2 and I2 = 0.453 M

Step 2: the balanced equation

H2 + I2 ⇆ 2HI

Step 3: The initial concentration

[H2] = 0.453 M

[I2] = 0.453 M

[HI] = 0 M

Step 4: The concentration at equilibrium

[H2] = 0.453 - X

[I2] = 0.453 - X

[HI] = 2X

Step 5: Calculate Kc

Kc = [Hi]² / [H2][I2]

54.3 = 4x² / (0.453 - X(0.453-X)

X = 0.3563

[H2] = 0.453 - 0.3563 = 0.0967 M

[I2] = 0.453 - 0.3563 = 0.0967 M

[HI] = 2X = 2*0.3563 = 0.7126 M

Answer:

Spahgetti

Explanation:

Answer:

1 particle of the gas would occupy a volume of 3.718*10⁻²³L

Explanation:

Hello,

1. The sample has a particle of 6.022×10²²particles

2. Volume of the sample = 22.4L

3. Temperature of the sample = 0°C = (0 +273.15)K = 273.15K

4. Pressure of the sample = 1.0atm

What volume would 1 particle of the gas occupy?

But we remember that 1 mole of any substance = 6.022×10²² molecules or particles or atoms

What would be the number of moles for 1 particule?

1 mole = 6.022×10²² particles

X moles = 1 particle

X = (1 × 1) / 6.022×10²² particles

X = 1.66×10⁻²⁴ moles

Therefore, 1 particle contains 1.66×10⁻²⁴ moles

Since we know our number of moles, we can proceed to use ideal gas equation,

Ideal gas equation holds for all ideal gas and is defined as

PV = nRT

P = pressure of the ideal gas

V = volume the gas occupies

n = number of moles of the gas

R = ideal gas constant = 0.082 L.atm / mol.K

T = temperature of the gas

PV = nRT

Solving for V,

V = nRT/ P

We can now plug in our values into the above

equation.

V = (1.66*10⁻²⁴ × 0.082 × 273.15) / 1

V = 3.718*10⁻²³L

Therefore, 1 particule of the gas would occupy a volume of 3.718*10⁻²³L.

Answer:

Based on the given question, the dimensions of the plate is 15 cm in length, 12.5 cm in width, and 3.50 mm in thickness (0.350 cm). Now the volume of the plate will be,  

V = 15 cm × 12.5 cm × 0.350 cm = 65.62 cm³

A hole of diameter 2.50 cm is drilled through the center of the plate, at the height of 3.50 mm or 0.350 cm. Now the volume of the hole is π(r)²h,  

= 22/7 × (1.25 cm)² × 0.350 cm = 1.72 cm³

Thus, the volume of the plate will be determined by subtracting the volume of plate with the volume of hole, which will be,  

65.62 cm³ - 1.72 cm³ = 63.9 cm³

The density of the alloy is 8.80 g/cm³, therefore, the mass of the alloy can be determined by using the formula, mass = density * volume  

mass = 8.80 g/cm³ × 63.9 cm³ = 562.32 grams

Of the total alloy, 0.090 percent is Si, that is,  

(0.090/100) × 562.32 g = 0.506 grams of Si

The natural abundance of the element is not determined by mass but by the number of atoms it possess. For this Avogadro's number and atomic mass of Si is used. Now the number of atoms of Si present is,  

(0.506 g) (1 mol/28.0855 g) (6.023 × 10²³ atoms /mol) = 1.08 × 10²² Si atoms

Of these Si atoms, 3.10 percent are Si-30 so,  

= (3.10 / 100) × (1.08 × 10²² atoms) / 1000 = 3.34 × 10²⁰ atoms of Si-30. or 3.4 × 10²⁰ atoms

Answer:

A substance that increases H3O+ concentration when it is dissolved in water.

Explanation:

Note that H3O+ and H+ are used quite interchangeably in chemistry.

An acid makes the H+ content higher, thereby decreasing the pH.

Answer:

a

A substance that increases H3O+ concentration when it is dissolved in water.

Explanation:

Answer:0.30 m KI ---- A. Highest boiling point

0.19 m Mg(CH3COO)2 ---- B. Second highest boiling point

0.53 m Glucose(nonelectrolyte) ---- Third highest boiling point-C

0.13 m FeCl3---- Lowest boiling point-D

Explanation:

Using the  boilng point elevation formula

ΔTb=m* kb *i

where m= molality

kb= elevated boiling point constant( here kb values will be same for all soluton)

i= vant hoff factor = number of ions present in a solution

Using the  number of ions and molarity present in a solution as a collagative property, since kb is constant, we can determine which of the species has the highest boiling point.

1.) 0.13 m FeCl3= Fe³⁻  + Cl⁻

        i=4

ΔTb=m* kb* i= molarity x number of ionsx Kb= 0.13 x 4= 0.52kb

2) 0.19 m Mg(CH3COO)2 = Mg²⁺ + CH₃COO⁻

i= 3

ΔTb=m* kb* i= molarity x number of ions= 0.19 x 3= 0.57kb

3. 0.30 m KI = K⁺  + I⁻

i= 2

ΔTb=m *kb *= imolarity x number of ions xKb= 0.30x 2= 0.60kb

4. 0.53 m Glucose(nonelectrolyte) =

i= 1 for nonelectroytes

ΔTb=m* kb* i = molarity x number of ionsx Kb= 0.53 x 1= 0.53Kb

therefore,

0.30 m KI ---- A. Highest boiling point

0.19 m Mg(CH3COO)2 ---- B. Second highest boiling point

0.53 m Glucose(nonelectrolyte) ---- Third highest boiling point

0.13 m FeCl3---- Lowest boiling point

Answer:

[Z] = 0.00248M

Explanation:

Based in the reaction:

2A(aq) + B(aq) ⇄ 2Z (aq)

K of the reaction is defined as:

K = [Z]² / [A]²[B] = 0.43

If you add, in the first, just 0.033M of  Z, concentrations in equilibrium are:

[Z] = 0.033M - 2X

[A] = 2X

[B] = X

Replacing in K equation:

0.43 = [0.033M - 2X]² / [2X]² [X]

0.43 = [0.033M - 2X]² / [2X]² [X]

0.43 = 4X² -0.132X + 0.001089 / 4X³

1.72X³ - 4X² + 0.132X - 0.001089 = 0

Solving for X:

X = 0.01526M

Replacing, concentration in equilibrium of Z is:

[Z] = 0.033M - 2*0.01526M = 0.00248M

Answer:

Less than 0.033 M

Explanation:

Hello,

In this case, given the equilibrium:

[tex]2A(aq) + B(aq) \rightleftharpoons 2Z (aq)[/tex]

Thus, the law of mass action is:

[tex]K=\frac{[Z]^2}{[A]^2[B]}[/tex]

Nevertheless, given the initial concentration of Z that is 0.033 M, we should invert the equilibrium since the reaction will move leftwards:

[tex]\frac{1}{K} =\frac{[A]^2[B]}{[Z]^2}=2.33[/tex]

Know, by introducing the change  due to the reaction extent, we can write:

[tex]2.33=\frac{(2x)^2*x}{(0.033M-2x)^2}[/tex]

Which has the following solution:

[tex]x_1=2.29M\\x_2=0.0181M\\x_3= 0.0153M[/tex]

But the correct solution is [tex]x=0.0153M[/tex]  since the other solutions make the equilibrium concentration of Z negative which is not possible. In such a way, its concentration at equilibrium is:

[tex][Z]_{eq}=0.033M-2*0.0153M=0.0024M[/tex]

Which is of course less than 0.033 M since the addition of a product shift the reaction leftwards in order to reestablish equilibrium (Le Chatelier's principle).

Regards.

Answer:the volume of the gas particles is negligible compared with the total volume of the  gas.--D

Explanation:

According to the Kinetic Molecular Theory for ideal gases, it states that

--Gases are composed of larges  molecules which are in constant random motion  in a straight line

--The volume of the gas particles is negligible compared to the total volume in which the gas is contained.

-----The  Attractive and repulsive forces between gas molecules is insignificant ie There are no interactive forces.

----The collisions of the particles  are perfectly elastic and energyis  being transferred between the particles but the total energy remaining constant

From the  statements of the kinetic Molecular theory of ideal gases, it can be seen that the statement which describes the particles of an ideal gas is option D  which is The volume of the gas particles is negligible compared with the total volume of the  gas--- ---This gives the reason why  gases  can be compressed. Since there are no  inter molecular forces between them. The particles of an  ideal gas will move at the same random motion  resulting to high pressures, compressing the gas and making the volume negligible or insignificant.

Answer: they blow up

Explanation: add them together and they will blow up

Answer:

Magnesium nitrate Reactions

Magnesium nitrate has a high affinity towards water. Therefore, heating it results to decompose into magnesium oxide, nitrogen oxides, and oxygen. 2 Mg(NO3)2 → 2 MgO + 4 NO2 + O2.

Answer:

Hi there!

When dropping Alka-Seltzer into a glass of water, bubbles immediately appear and the solid substance “disappears”, dissolves, into the water. This forms a new compound, a liquid, which means a reaction took place.

Answer:

The correct answer will be "5.26 × 10⁻⁶".

Explanation:

The given values is:

[tex][H^{+}]=1.9\times 10^{-9} M[/tex]

As we know,

⇒  [tex]pH+pOH=14[/tex]

On taking log, we get

⇒  [tex]-log[H^{+}] + -log[OH^{-}] = 14[/tex]

Now,

Taking "log" as common, we get

⇒  [tex]log[H^{+}][OH^{-}]= -14[/tex]

⇒  [tex][H^{+}][OH^{-}]= 10^{-14}[/tex]

⇒  [tex][OH^{-}]=\frac{10^{-14}}{[H^{+}]}[/tex]

On putting the estimated value of "[tex][H^{+}][/tex]", we get

⇒             [tex]=\frac{10^{-14}}{1.9\times 10^{-9}}[/tex]

⇒             [tex]=5.26\times 10^{-6}[/tex]

The mass of the atom is calculated by adding the number of protons and neutrons .

The total mass of one atom of an element is defined as its atomic mass. The atomic mass is taken as the mass of protons and neutrons in an atom.

1 a m u = 1.66 ×10⁻²⁴g

To calculate the atomic mass of an element -:

The atomic mass of the single atom can be calculated by adding the total number of protons and the total number of neutrons of that particular atom.

Atomic mass Number = Number of protons + number of neutrons

Hence ,in this way the atomic mass is calculated of an atom .

Learn more about atomic mass ,here:

https://brainly.com/question/17067547

#SPJ5

Answer:

[Cd²⁺] = 2.459x10⁻⁶M

Kf = 9.96x10⁶

Explanation:

Solubility of CdC₂O₄ is 6.1x10⁻³M and ksp is 1.5x10⁻⁸

The ksp of CdC₂O₄ is:

CdC₂O₄(s) ⇄ Cd²⁺(aq) + C₂O₄²⁻(aq)

ksp = [Cd²⁺] [C₂O₄²⁻] = 1.5x10⁻⁸

As solubility is 6.1x10⁻³M, concentration of C₂O₄²⁻ ions is 6.1x10⁻³M. Replacing:

[Cd²⁺] = 1.5x10⁻⁸ / [6.1x10⁻³M]

All Cd²⁺ in solution is 6.1x10⁻³M and exist as Cd²⁺ and as Cd(NH₃)₄²⁺. That means concentration of Cd(NH₃)₄²⁺ is:

[Cd(NH₃)₄²⁺] + [Cd²⁺] = 6.1x10⁻³M

[Cd(NH₃)₄²⁺] = 6.1x10⁻³M - 2.459x10⁻⁶M = 6.098x10⁻³M

In the same way, the whole concentration of NH₃ in solution is 0.150M, as you have 4ₓ6.098x10⁻³M = 0.024M of NH₃ producing the complex, the concentration of the free NH₃ is:

[0.150M] = [NH₃] + 0.024M

The equilibrium of the complex formation is:

Cd²⁺ + 4 NH₃ → Cd(NH₃)₄²⁺

The kf, formation constant, is defined as:

Kf = [Cd(NH₃)₄²⁺] / [Cd²⁺] [NH₃]⁴

Replacing:

Kf = [6.098x10⁻³M] / [2.459x10⁻⁶M] [0.1256M]⁴

Answer:

Explanation:

The main objective here is to draw a diagram of an heterocyclic compound containing two C-N bonds in the structure. One with free rotation, as expected for a single bond, but the other C-N bond exhibits restricted rotation. After that ; we will identify the C-N bond with restricted rotation, and also justify our answer by drawing resonance structures.

So; the first image below shows the structure of the heterocyclic compound containing two C-N bonds in the structure with One with free rotation, as expected for a single bond, but the other C-N bond exhibits restricted rotation. From the first diagram. the squared area indicates the  C-N bond that exhibits restricted rotation.

The amide bonds in the C-N bonds offers the resonance characteristics and thus exhibits restricted rotation. The resonance is shown in the second image below

Answer:

1). strong nuclear force 2). nuclear binding energy 3), mass defect

Explanation:

Right on Edge

1. Strong nuclear force the force that keeps the nucleons bound inside the nucleus of an atom.

2. Nuclear binding energy the amount of energy needed to split the nucleus into individual protons and neutrons.

3. Mass defect the difference between the mass of the nucleons and the mass of an Atom.

The term strong nuclear force is defined as the force that binds protons and neutrons together. It also binds them all together in a nucleus and is responsible for the energy released in nuclear reactions.

The examples of strong nuclear force are the force that hold protons and neutrons in nuclei of atoms. The elements' greater than the hydrogen atom. The fusion of hydrogen into helium in the sun's core.

Thus, 1. option B, 2. option B and 3. option B is correct.

To learn more about the strong nuclear force, follow the link;

https://brainly.com/question/19271485

#SPJ2

Answer:

The half-life of the material is 2 years

Explanation:

Given;

initial count rate = 2000 decays/minute

final count rate =  500 counts/min

decay time = Four hours

To determine the half life of the material; we create a simple decay table that matches the decay time and count rates.

time (years)                     count rate

0                                    2000 decays/minute

2                                     1000 decays/minute

4                                     500 decays/minute

Half life is the time intervals = 2 years

Also using a formula;

[tex]N = \frac{N_o}{(t/2)^2} \\\\N_o-is \ the \ initial \ count\ rate\\\\N-is \ the \ final \ count\ rate\\\\t/_2 - is \ the\ half\ life \\\\N = \frac{N_o}{(t/2)^2} \\\\500 = \frac{2000}{(t/2)^2}\\\\(t/_2)^2 = \frac{2000}{500} \\\\(t/_2)^2 = 4\\\\t/_2 = \sqrt{4} \\\\t/_2 = 2 \ years[/tex]

Therefore, the half-life of the material is 2 years

Answer:

The type of reaction is Polymerization

Answer:

combustion?

Explanation:

Yo, like what is that question.

2 i hope this helps

:)✨✨✨✨✨✨

Answer:

The correct answer is 6.67×10⁻³.

Explanation:

Based on the given question, the amount of solute (KmNO4) is 45 grams. The molecular weight of KmNO4 is 158 gram per mole. The moles of solute can be determined by using the formula,  

n = mass/molecular weight  

n = 45/158 = 0.28  

The amount of solvent (water) given is 750 milliliters, and the density of water is 1 gm. per ml, 18 gram per mole is the molecular weight of water. So, the moles of solvent will be,  

n = 750/18 = 41.7  

The formula for calculating mole fraction is,  

Mole fraction = mole of solute / (mass of solute + mole of solvent)

The mole fraction of solute can be determined by putting the values in the above mentioned formula,  

Mole fraction of KmNO4 = 0.28/(0.28+41.7)

= 0.28/41.98

= 6.67 × 10⁻³ or 7 × 10⁻³.  

Answer:

well the MF is 224.78 g/mol

Explanation:

just times them all by the molor mass and divide it by 3

Answer:

ammonia

Explanation:

Answer:

Was is a hydrocarbon therefore when heated some co2 escapes but later solidifies

Explanation:

Hope it helps

Answer:

yes

Explanation:

because it will keep them entertained and will learn new things

Answer:

Explanation:

The covalent bond is the chemical bond between atoms where electrons are shared, forming a molecule. Covalent bonds are established between non-metallic elements, such as hydrogen H, oxygen O and chlorine Cl. These elements have many electrons in their outermost level (valence electrons) and have a tendency to gain electrons to acquire the stability of the electronic structure of noble gas.

The covalent bond between two atoms can be polar or nonpolar. If the atoms are equal, the bond will be nonpolar (since no atom attracts electrons more strongly). But, if the atoms are different, the bond will be polarized towards the most electronegative atom, because it will be the atom that attracts the electron pair with more force. Then it will be polar.

It can occur in a molecule that the bonds are polar and the molecule is nonpolar. This occurs because of the geometry of the molecule, which causes them to cancel the different equal polar bonds of the molecule.

In carbon tetrachloride the bonds are polar, but the tetrahedral geometry of the molecule causes all four dipoles to cancel out and the molecule to be apolar.

The carbon tetrachloride s CCL4 is a carbon molecule and four chloride molecule's. The carbon tetrachloride is a nonpolar, as the dipole movement of the molecules ae evenly spaced around the central carbon atom.

Hence the carbon tetrachloride happens to be a nonpolar molecular.

Learn more about the in terms of charge distribution, why a molecule.

brainly.com/question/11858200.