Answer:ty
Explanation:
ARAT ML MGA LODS
ID:426667817
An engine that creates ignites fuel with highly compressed air.
Explanation:
An engine that creates ignites fuel with highly compressed air. air engine
Assume that the speed of new computers costing a certain amount of money grows exponentially over time, with the speed doubling every 18 months. Suppose you need to run a very time consuming program and are allowed to buy a new computer costing a fixed amount on which to run the program. If you start now, the program will take 7 years to finish. How long should you delay buying the computer and starting the program so that it will finish in the shortest amount of time from now
Therefore, in order to run the program in the shortest time, you should delay for 3 years
Given that the speed of new computers costing a certain amount of money grows exponentially over time, with the speed doubling every 18 months.
Exponential equation as a function of time can be expressed as
P(t) = [tex]P_{0}[/tex][tex]R^{t/T}[/tex]
Quantity P will be increasing exponentially when R > 1. And it will decrease exponentially when R < 1.
Suppose you need to run a very time consuming program and are allowed to buy a new computer costing a fixed amount on which to run the program. If you start now, the program will take 7 years to finish.
Let the time required to run and complete a program for time t years be P(t).
If the speed doubling every 18 months, which is 3/2 years. This will eventually cause the running time to decrease by half (0.5)
P(t) = 7[tex](1/2)^{3t/2}[/tex] = 7[tex](2)^{-3t/2}[/tex]
The total time T will be sum of the delay time t and the time of running the program. That is
T(t) = t + P(t)
T(t) = t + 7[tex](2)^{-3t/2}[/tex] .......... (2)
We can calculate the minimum time t by differentiating the above equation and make it equal to zero.
dT/dt = 1 + 14/3[tex](2)^{-3t/2}[/tex](ln0.5) = 0
14/3[tex](2)^{-3t/2}[/tex](ln0.5) = -1
[tex](2)^{-3t/2}[/tex](ln0.5) = -3/14
[tex](2)^{-3t/2}[/tex] = -3/14ln0.5
Log (natural logarithm) both sides
-3t/2ln2 = ln(3/14ln2)
make t the subject of formula
t = - 3ln(3/14ln2) ÷ 2ln2
t = 2.5 approximately
To know how long you should delay buying the computer and starting the program so that it will finish in the shortest amount of time from now, substitute t into equation 2
T(2.5) = 2.5 + (7)[tex]2^{-3(2.5)/2}[/tex]
T(2.5) = 2.5 + 0.5202
T(2.5) = 3.02 years
T (2.5) = 3 years approximately
Therefore, in order to run the program in the shortest time, you should delay for 3 years
Learn more here: https://brainly.com/question/6497099
Imagine that you have an image that is too dark or too bright. Describe how you would alter the RGB settings to brighten or darken it. Give an example.
The ______ Works on a single variable or constant. *
Answer:
man
Explanation:
computer Graphics:
B. Arbitrary reference point:
1) Apply a rotation by 60° on the Pivot Point (-10, 10) and display it.
2) Apply a rotation by 270° on the Pivot Point (10, 0) and then translate it by tx
= -20 and ty = 5. Display the final result.
True or False? Voice recognition is the process of determining the meaning of the words spoken by a human.
Answer:
The answer is False.
When you create a _____ query, the value the user enters in the dialog box determines which records the query displays in the results. a. parameter
When a parameter query is created, the value entered in a dialog box by an end user determines the record that would be displayed in the results.
A query refers to a computational request for data (information) that are saved either in a database table, from existing queries, or from a combination of both a database table and existing queries.
Basically, there are four (4) main types of query and these include:
Select query.Action query.Aggregate query.Parameter query.A parameter query is designed and developed to display a dialog box that prompts an end user for data or field criteria, which determines the record that would be displayed in the results.
Read more: https://brainly.com/question/23388493
Write a program that reads a list of integers, and outputs whether the list contains all even numbers, odd numbers, or neither. The input begins with an integer indicating the number of integers that follow.If the input is:5246810Then the output is:all evenIf the input is:513579
Answer:
uuuuu
Explanation:
Answer:
57677748957394209690369-34064666
Explanation:
Write a recursive function called DigitCount() that takes a positive integer as a parameter and returns the number of digits in the integer. Hint: The number of digits increases by 1 whenever the input number is divided by 10. Ex: If the input is:
Recursive functions are functions that are called from within itself
The recursive function DigitCount() in Python where comments are used to explain each line is as follows:
#This defines the function
def countDigits(n):
#If the integer is less than 10
if n< 10:
#Then the integer has 1 digit
return 1
#Otherwise,
else:
#Count the number of integers
return 1 + countDigits(n / 10)
At the end of the function, the count of integers is returned to the main function
Read more about similar programs at:
https://brainly.com/question/20397067
Ruzwana is a system administrator at an organization that has over 1000 employees. Each of the employees brings their own devices to work. She wants to find an efficient method that will allow her to make the various devices meet organizational standards. In addition, she would like to deploy various universal applications such as the VPN client, meeting software, and productivity software to these systems. Which of the following options should Ruzwana use to achieve the desired outcome in this scenario?
a. A provisioning package.
b. A catalog file.
c. A configuration set.
d. An answer filE.
In this scenario, the option which Ruzwana should use to ensure that the various devices meet organizational standards and for the deployment of various universal applications is: d. An answer file
An answer file can be defined as an XML-based file which contains the configuration settings and values that should be used during the installation of a software program on one or more devices in accordance with specific standards. Thus, each and every device using the same answer file would have the same configuration setting.
Additionally, an answer file allows a system administrator to automatically deploy various software programs such as meeting software and productivity software to a particular system or network.
In this context, the most appropriate option which Ruzwana should use to ensure that the various devices meet organizational standards and for the deployment of various universal applications is an answer file.
Read more on software here: https://brainly.com/question/25703767
Find the error and rewrite the code with the error fixed.
// INSTANCE VARIABLE
public class Main {
public static void main(String[] args) {
Product prod1 = new Product();
prod1.Barcode = 123456;
Product prod2 = new Product();
prod2.Barcode = 987654;
System.out.println(prod1.Barcode);
System.out.println(prod2.Barcode);
}
}
public class Product {
public int Barcode;
}
Answer:
Explanation:
1st mistake: Barcode is written with upeer case, that's not the convention for variables in java, only classes.
2nd: Barcode is public, it is convention to always leave variables private then create getters and setters in case you need to change the value but never acess the variable outside the class it belongs. Also the class should at least have a default constructor in case you are going to instantiate an object outside it.
so the product class should be:
--------------------------------------------------------------------
public class Product {
private int barcode;
public Product() {
// default constructor
}
public int getBarcode() {
return barcode;
}
public void setBarcode(int barcode) {
this.barcode = barcode;
}
}
-------------------------------------------------------------------------
3rd: in the main class now you can instantiate the 2 objects but you are gonna set the variable and get the value through the method, like this:
public class Main {
public static void main(String[] args) {
Product prod1 = new Product();
prod1.setBarcode(123456);
Product prod2 = new Product();
prod2.setBarcode(987654);
System.out.println(prod1.getBarcode());
System.out.println(prod2.getBarcode());
}
}
-----------------------------------------------------------------------------------
Assuming the 2 classes (main and product) are in the same package. But in case they are in different packages, just make sure to import the Product class into the Main class so that you can instantiante an object (new Product()) of it.
The web design teams of a company are working on designing websites for various companies, Pick the ideas that employ proper use of
metaphor.
Danny is creating a website for senior citizens that uses large fonts to improve accessibility. Keenan is working on a website for school children
learning chemistry that is designed to look like a chemistry lab. Justin has created a website for a flower bouquet manufacturer that shows all
the available types of bouquets. Adam has designed a website for viewing movie trailers for the local cinema that display the video on a screen
made to look like a drive-in theater. Paul has created a website for pre-school children to learn English using very simple language and small
words.
Answer:
C
Explanation:
I KNOW ITS RIHGHT
Answer:
1. Keenan is working on a website for school children learning chemistry that is designed to look like a chemistry lab. 2. Adam has designed a website for viewing movie trailers for the local cinema that display the video on a screen made to look like a drive-in theater
Explanation: 5/5 on the test
Viewing digital content
Digital Content Creation Platforms offer content subscription or pay-as-you-go services for organizations. ... By offering access to this media, Digital Content Creation platforms make it so that organizations can share media of social interest while still complying with copyright laws.
1. Where did the Industrial Revolution start and why did it begin there?
Answer:
The first Industrial Revolution began in Great Britain in the mid-to-late 1700s, when innovation led to goods being produced in large quantities due to machine manufacturing.
This process began in Britain in the 18th century and from there spread to other parts of the world. Although used earlier by French writers, the term Industrial Revolution was first popularized by the English economic historian Arnold Toynbee (1852–83) to describe Britain's economic development from 1760 to 1840.
Answer:
This process began in Britain in the 18th century and from there spread to other parts of the world. Although used earlier by French writers, the term Industrial Revolution was first popularized by the English economic historian Arnold Toynbee (1852–83) to describe Britain’s economic development from 1760 to 1840
Historians have identified several reasons for why the Industrial Revolution began first in Britain, including: the effects of the Agricultural Revolution, large supplies of coal, geography of the country, a positive political climate, and a vast colonial empire.
Explanation:
g The reduced ISA consists of four instructions: What are those instructions and what does each instruction do
The ISA is run by some set of instructions. This instructions are;
1. Arithmetic: This Instructions perform various Arithmetic functions
2. Logical: This instruction often carryout Logical operations on one or more operands.
3. Data transfer: This handles the transfer of instructions from memory to the processor registers and then backward process again.
4. Flow control: These instructions helps in breaking the sequential flow of instructions and jumping to instructions at different locations.
Instruction set is simply known to be a full combination /number of instructions that are understood by a CPU.
It is know as a machine code that is often written in binary, and shown by assembly language.
Learn more from
https://brainly.com/question/22740965
Five jobs arrive nearly simultaneously for processing and their estimated CPU cycles are, respectively: Job A = 2 ms, Job B = 12 ms, Job C = 15 ms, Job D = 7 ms, and Job E = 3 ms.
Using FCFS, in what order would they be processed? What is the total time required to process all five jobs? What is the average turnaround time for each of these five jobs?
This is an example with solution:
Five jobs arrive nearly simultaneously for processing and their estimated CPU cycles are, respectively: Job A = 12, Job B = 2, Job C = 15, Job D = 7, and Job E = 3 ms.
a. Using FCFS, and assuming the difference in arrival time is negligible, in what order would they be processed? What is the total time required to process all five jobs? What is the average turnaround time for all five jobs?
Answer: The order of processing for the given jobs = A->B->C->D->E.
Total time needed to process all the jobs = 12+2+15+7+3 = 39 ms.
Turn around time for job A = 12 ms.
Turn around time for job B = 15 ms.
Turn around time for job C = 30 ms.
Turn around time for job D = 37 ms.
Turn around time for job E = 40 ms.
Answer : Therefore, the average turnaround time = (12+15+30+37+40)/5 = 26.8 ms.
Order of processing is A, B, C, D, E and Total time to process and Average turnaround time is 39 ms and 24 ms
Turnover time and order of processing:Order of processing = A, B, C, D, E
Total time to process all five jobs = Job A + Job B + Job C + Job D + Job E
Total time to process all five jobs = 2 + 12 + 15 + 7 + 3
Total time to process all five jobs = 39 ms
Average turnaround time = [(2-0) + (2+12-0) + (2+12+15-0) + (2+12+15+7-0) + (2+12+15+7+3-0)] / 5
Average turnaround time = (2+14+29+36+39) / 5
Average turnaround time = 24 ms
Find out more information about 'Turnaround time'.
https://brainly.com/question/5768680?referrer=searchResults
In this paper https://arxiv.org/pdf/2008.10150.pdf, I'm having a hard time understanding how the assignment in the picture is derived, can you please work this out?
Answer:
f*(i,z) = log pxz
Explanation:
they round
If there are over 1,000 websites about a certain topic, the information is reliable. A. True B. False
Answer:
If they all have the same answer it is true, but if they are all different check with trusted sources
Explanation:
. Question 2 Fill in the blank: R Markdown notebooks can be converted into HTML, PDF, and Word documents, slide presentations, and _____.
R markdown notebook describes a notebook format in R programming which supports R programmers to run codes while also writing documents or explanation alongside. Hence, the missing option is Dashboard.
R markdown may be compared to jupyter notebooks which also supports writing in markdown language. The R markdown notebooks can be created using the R studio, which allows the conversion notebooks of these notebooks into several different formats including the creation of dashboards.Hence, R markdown notebooks can be converted to HTML PDF, word document, slide presentation and dashboards.
Learn more :https://brainly.com/question/25575402
A notebook for R Markdown is required to document, discuss, and justify each stage of your investigation.
R markdown notebook presents a R programming notebook style that enables R programmers to run codes while simultaneously producing papers or explanations. A R Notebook, which is a document written in R Markdown, allows the software components to be run separately and in real-time. Additionally, it does away with the necessity of weaving all of your R Markdown text in order to test the results as you build your website.
Every R Notebook has the ability to be converted into any other R Markdown document type, and every R Markdown document has the ability to be used as a notebook. R Notebooks are thus a special operating option.
learn more about R Markdown here:
brainly.com/question/25575402
#SPJ4
Turtle graphics windows do not automatically expand in size. What do you suppose happens when a Turtle object attempts to move beyond a window boundary
When a turtle object attempts to move beyond a window boundary, the turtle object stops because it cannot move outside the window boundary.
The turtle graphics window is simply a graphics window that is used as a playground when drawing turtles.
A turtle object is always in the turtle graphics window.
This in other words mean that, the turtle object cannot exceed the boundaries of the turtle graphics window
An attempt to move the turtle object outside its window will stop the turtle object;
This is so because the turtle object is always in the turtle graphic window, and it cannot move beyond it.
Read more about turtle graphics window at:
https://brainly.com/question/3070883
In a _____, there is no skipping or repeating instructions. A. iteration B. sequence C. selection D. conditional
Answer:
B: Sequence.
Explanation:
What type of database replication relies on centralized control that determines when replicas may be created and how they are synchronized with the master copy
Database replication is very common in this Era. Traditional database replication is relies on centralized control that determines when replicas may be created and how they are synchronized with the master copy.
Database replication is known to be the constant electronic copying of data from a database using one computer or server that is connected also to a database in another . this ensure that all users do share the same level of information.
Replication is often done to technologies which are used for copying and distributing data and database objects from one database to another and thereafter use in synchronizing between databases.
Conclusively, Replicas can only be made in the Traditional database replication through the power of centralized control.
See full question below
What type of database replication relies on centralized control that determines when replicas may be created and how they are synchronized with the master copy?
a distributed database model
b. traditional database replication
c. enterprise replication
d. local database model
Learn more about database replication from
https://brainly.com/question/6447559
Write a function named partfthat takes inas parameterstwo parallel lists: a list of times (in increasing order), and a list of distance traveled by that point in time. The function should return a new list giving the average velocity between consecutive time measurements. The new list should have a length of one less than the original lists.
The program calculates the velocity between points in a list is written below. The program is written in python 3 thus ;
t = input("Enter time values : ")
#Enter the time values of the data
p = input("Enter distance values : ")
#Enter the distance values
dist = [float(x) for x in p.split()]
time = [float(x) for x in t.split()]
#pyt then values in a list
def partfthat(dist, time):
#initialize function that takes in two parameters
vel = []
#empty list to hold the calculated velocity values
i = 0
#indexer
while i <= len(dist)-2:
#while loop to iterate
v = (dist[i+1] - dist[i]) / (time[i+1] -time[i])
#Use the velocity formula
vel.append(v)
#append values to the empty list created
i+=1
return vel
print(avg_vel(dist, time))
A sample run of the program is attached.
Learn more : https://brainly.com/question/25681441
Creating an application for an ice cream shop. Create an interface named Flavor. Create three subclasses Lemon, Mint, and Chocolate. Create a class named Cone that has a single member variable named scoops of type List with a generic argument of Flavor. Initialize the scoops member variable to an object of one of the two list classes discussed during the lecture. Add a method named add with a single parameter of type Flavor named scoop. This will add the scoop object to the scoops list.
Create a class named IceCreamShop. The class has a single member variable of type Map named orders. Initialize this map to an instance of type HashMap. This map is used to track customer orders. It maps a customer name of type String to an instance of Cone. The map is modified by the following methods:
Add a method orderScoop(String customer, Flavor flavor). This method first checks if thereâs already an order for the given customer in the map. If the map does not have an entry with the customer name, a new entry is put into the map with a new Cone object. If the map already contains an entry, it gets the cone value from the map. Then it adds a new flavor to the cone. Note: Thereâs no need to put the cone back into the map because the map uses a reference to the cone object.
Add a method completeOrder(String customer). This method will return the cone for the given customer and remove the entry from the map.
Answer:
I don't know for sure what the answer is but I hope you can find someone that can give you the answer sorry!
Explanation:
Fill in the blank: _____ data are statistical and numerical facts about a project.
Subjective
Quantitative
Mathematical
Qualitative
Quantitative data are statistical and numerical facts about a project that can be counted, measured or expressed using numbers.
Quantitative data is statistical and its nature is usually structured, it uses numbers and values that are most suitable for the analysis of a project.
The collection of quantitative data offers the possibility of statistical analysis.This type of data allows you to easily measure and quantify facts in an organized and accessible way within relational databases.Therefore, we can conclude that quantitative data is data that comes from numerical information, quantities, percentages, proportions and statistics.
Learn more about quantitative data here: https://brainly.com/question/96076
Write the function void sort2(double* p, double* p) that receives two pointers and sorts the values to which they point. To test the function, write the main function that prompts the user to enter two values and then print out the sorted values. If you call sort2(&x, &y) then x <= y after the call.
The function illustrates the use of pointers.
Pointers are used to store address in programming languages such as C and C++.
The program in C language where comments are used to explain each line is as follows:
#include <stdio.h>
//This defines the function
void sort2(double* p1, double* p2){
//This declares a temporary variable t
double t;
//If p2 is less than p1,
if (*p2 < *p1) {
//The next 3 lines swap their values
t = *p2;
*p2 = *p1;
*p1 = t;
}
//This prints p1
printf("%f ", *(p1));
//This prints p2
printf("%f ", *(p2));
}
//The main method to test the function begins here
int main(){
double x = 23.0;
double y = 14.1;
sort2(&x, &y);
return 0;
}
//The program ends here
Read more about similar programs at:
https://brainly.com/question/15683939
Write an inheritance hierarchy for classes Quadrilateral, Trapezoid, Parallelogram, Rectangle and Square. Use Quadrilateral as the superclass of the hierarchy. Create and use a Point class to represent the points in each shape. Make the hierarchy as deep (i.e., as many levels) as possible. Specify the instance variables and methods for each class. The private instance variables of Quadrilateral should be the x-y coordinate pairs for the four endpoints of the Quadrilateral. Write a program that instantiates objects of your classes and outputs each object‟s area (except Quadrilateral
Answer:
CODE:
public class QuadrilateralTest {
public static void main(String[] args) {
// NOTE: All coordinates are assumed to form the proper shapes
// A quadrilateral is a four-sided polygon
Quadrilateral quadrilateral =
new Quadrilateral(1.1, 1.2, 6.6, 2.8, 6.2, 9.9, 2.2, 7.4);
// A parallelogram is a quadrilateral with opposite sides parallel
Parallelogram parallelogram =
new Parallelogram(5.0, 5.0, 11.0, 5.0, 12.0, 20.0, 6.0, 20.0);
// A rectangle is an equiangular parallelogram
Rectangle rectangle =
new Rectangle(17.0, 14.0, 30.0, 14.0, 30.0, 28.0, 17.0, 28.0);
// A square is an equiangular and equilateral parallelogram
Square square =
new Square(4.0, 0.0, 8.0, 0.0, 8.0, 4.0, 4.0, 4.0);
System.out.printf(
"%s %s %s %s\n", quadrilateral, parallelogram,
rectangle, square);
}
}
RESULT:
Coordinates of Quadrilateral are:
2 (1.1, 1.2), (6.6, 2.8), (6.2, 9.9), (2.2, 7.4)
3
4 Coordinates of Parallelogram are:
5 (5.0, 5.0), (11.0, 5.0), (12.0, 20.0), (6.0, 20.0)
6 Width is: 6.0
7 Height is: 15.0
8 Area is: 90.0
9
10 Coordinates of Rectangle are:
11 (17.0, 14.0), (30.0, 14.0), (30.0, 28.0), (17.0, 28.0)
12 Width is: 13.0
13 Height is: 14.0
14 Area is: 182.0
15
16 Coordinates of Square are:
17 (4.0, 0.0), (8.0, 0.0), (8.0, 4.0), (4.0, 4.0)
18 Side is: 4.0
19 Area is: 16.0
Explanation:
In this exercise we have to use the knowledge of computational language in JAVA, so we have that code is:
It can be found in the attached image.
So, to make it easier, the code in JAVA can be found below:
public class QuadrilateralTest {
public static void main(String[] args) {
new Quadrilateral(1.1, 1.2, 6.6, 2.8, 6.2, 9.9, 2.2, 7.4);
new Parallelogram(5.0, 5.0, 11.0, 5.0, 12.0, 20.0, 6.0, 20.0);
new Rectangle(17.0, 14.0, 30.0, 14.0, 30.0, 28.0, 17.0, 28.0);
new Square(4.0, 0.0, 8.0, 0.0, 8.0, 4.0, 4.0, 4.0);
System.out.printf(
"%s %s %s %s\n", quadrilateral, parallelogram,rectangle, square);
}
}
See more about JAVA at brainly.com/question/2266606
Develop an algorithm and draw a flowchart to determine and input number is palindrome or not.
Partially-filled Arrays
Write the function rindby() which stands for remove mark>if not divisiby by. The function removes all elements from the array that are not evenly divisible by the argument n. You can find out if a number is evenly divisible by n using the remainder operator: % (there will be nothing left over).
The function returns the number of items removed or -1 if the array was originally empty.
The function takes 3 arguments:
the array of int that may be modified.
the size of the array (use size_t as the type)
the int n used to check for divisibility
Here are two short examples:
int a[] = {2, 3, 4, 5, 6};
size_t size = 5;
int removed = rindby(a, size, 2);
// removed->2, a = [2, 4, 6], size = 3
size = 0;
removed = rindby(a, size, 3);
// removed-> -1, no change otherwise
In the first case, the numbers 3 and 5 are removed because they are not divisible by 2. Only the numbers that are divisible by 2 are left in the array.
In the second, size has been set to , so the input array is empty and the function returns - 1.
Exam C++ Quick Reference
p1.cpp
1 #include // size_t for sizes and indexes
2 using namespace std;
3
4 ////////////////WRITE YOUR FUNCTION BELOW THIS LINE ///////////////
5 int rindby(int all, size_t& size, int number)
6 {
7 int result;
8 // Add your code here
9 return result;
10 }
11
Answer:
um
Explanation:
