50 POINTS help me pls someone​

50 POINTS Help Me Pls Someone

Answers

Answer 1

The values provided for the heat of reaction are missing some detail, therefore, the exact value of the heat of the reaction and percentage errors cannot be determined.

However, the heat of the reaction and the percentage error of the values obtained can be calculated using the formula below:

The heat of reaction = mass * specific heat capacity of water * temperature changePercentage error = error/true value * 100%

What is the heat of a reaction?

The change in enthalpy that takes place during a chemical reaction at constant pressure is known as the Heat of Reaction or the Enthalpy of Reaction.

The heat of reaction Formula is given below:

Q = mc∆T

where;

Q is the Heat of the Reactionm is the mass of mediumc = specific heat capacity of the reaction medium∆T = difference in temperature of the medium.

Learn more about the heat of reaction at: https://brainly.com/question/31687844

#SPJ1


Related Questions

Combustion engines became common in the mid-1800s when people began to use them to power ships, trains, and machinery in factories. Combustion engines add carbon dioxide to the air, and as a result, carbon dioxide in the atmosphere increased quickly. How did this change the total amount of energy in the Earth system, and how did this change happen? How did this affect global average temperature?

Answers

The increased carbon dioxide levels from combustion engines caused a change in the Earth's energy balance. The additional carbon dioxide in the atmosphere allowed less radiation to escape into space, leading to a net increase in energy retained by the Earth.

This increase in energy is known as the enhanced greenhouse effect, which caused the Earth's average temperature to rise. This phenomenon is known as global warming. The rise in temperature has had numerous impacts on the Earth's climate, including more frequent heatwaves, melting ice caps, rising sea levels, and changes in precipitation patterns. The consequences of global warming are extensive and pose a significant threat to human societies and natural ecosystems, making it crucial to reduce greenhouse gas emissions.

To know more about greenhouse effect, here

brainly.com/question/13706708

#SPJ1

What is the style of Vincent Van Gogh's Starry Night (1889)?

Post Impressionism

Symbolism

Pointilism

Surrealism

Answers

The style of Vincent Van Gogh's Starry Night (1889) is Post-Impressionism.

Understanding post-impressionalism

Post-Impressionism is an art movement that developed in France in the late 19th century as a reaction against the limitations of Impressionism. It is characterized by a focus on subjective emotions and personal interpretations of the world, as well as an interest in the formal qualities of art, such as color, line, and form.

Van Gogh's work is known for its expressive use of color and texture, and Starry Night is a prime example of his Post-Impressionist style, with its swirling brushstrokes, intense colors, and dreamlike quality.

Learn more about post impressionism here:

https://brainly.com/question/2725280

#SPJ1

A covalent compound is broken down into its individual elements. The amount of energy required to break the bonds is 1254 kJ, and the energy produced as a result of breaking the bonds is 1001 kJ. What type of reaction has most likely occurred?
a. combustible reaction
b. spontaneous reaction
c. endothermic reaction
d. exothermic reaction

Answers

Answer: c. endothermic reaction.

Explanation: In an endothermic reaction, energy is absorbed or required to break the bonds in the reactants. This means that more energy is required to break the bonds than is released by the formation of new bonds in the products, resulting in a net absorption of energy. In this case, the amount of energy required to break the bonds (1254 kJ) is higher than the energy produced by breaking the bonds (1001 kJ), indicating that the reaction requires an input of energy and is therefore endothermic.

Answer:

c. endothermic reaction

Explanation:

The given information states that the amount of energy required to break the bonds of the covalent compound is 1254 kJ, and the energy produced as a result of breaking the bonds is 1001 kJ.

In an endothermic reaction, the energy required to break the bonds is greater than the energy released or produced. This means that more energy is absorbed from the surroundings than is released during the reaction. In this case, since the energy required to break the bonds (1254 kJ) is greater than the energy produced (1001 kJ), it indicates that the reaction requires an input of energy from the surroundings, making it an endothermic reaction.

Option c, "endothermic reaction," is the correct answer based on the given information.

A scientist is designing a space probe that will be sent to Jupiter to analyze the atmosphere there. Before building a full-scale version of the probe, the scientist is going to build a model of it to test whether the probe can withstand the extreme environmental conditions of Jupiter's atmosphere. These extreme conditions include cold temperatures, strong gravitational forces, and high winds. Urgent!!!!!


Which of the following would most likely be the same about the scientist's model probe and the eventual full-scale version of the probe?

A.

They would be the same size.

B.

They would be made of the same material.

C.

They would be able to hold the same amount of fuel.

Answers

What would be the same  about the scientist's model probe and the eventual full-scale version of the probe is that; . They would be the same size. Option A

What is the conditions?

It is likely that the scientist's model probe would be built to replicate the size and proportions of the full-scale version because this would be vital in determining if the full-scale probe could endure the punishing conditions of Jupiter's atmosphere. The dimensions of the model probe and the real probe would therefore likely be the same.

However, it's likely that the model probe's parts weren't exactly the same as those in the actual probe.

Learn more about Jupiter:https://brainly.com/question/1451854

#SPJ1

(30 pts) Please find the correct answer.

Answers

The answer is 6.0 moles of HCl is required to neutralize 3.0 moles of Mg(OH)2.

The reason is because of the mole to mole ratio between HCl and Mg(OH)2.

Balanced equation: Mg(OH)2 + 2HCl = MgCl2 + 2H2O

If we look at the balanced equation between these two molecules, we can see that for every one mole of Mg(OH)2, two miles of HCl is required.

Therefore the answer is 6.0 moles.

How does a possum in Florida adapt to the winter season

Answers

Answer:

Because their fur doesn't provide much insulation from the cold, opossums typically spend the winter in dens that are dry, sheltered and safe.

Explanation:

Answer:

It finds a den or nest that is open

Explanation:

In 24 g of carbon ,how many number of carbon atoms.

Answers

There are 1.204 × 10²⁴ atoms in 24 grams of carbon.

How to calculate number of atoms?

The number of atoms present in a substance can be calculated by multiplying the number of moles in the substance by Avogadro's number as follows;

no of atoms = no of moles × 6.02 × 10²³

According to this question, there are 24 grams of carbon atom. The number of moles in this carbon is as follows:

no of moles = 24g ÷ 12g/mol = 2mol

no of atoms = 2 × 6.02 × 10²³

no of atoms = 1.204 × 10²⁴ atoms.

Learn more about atoms at: https://brainly.com/question/14190064

#SPJ1

why mendeleev's periodic law is an important milestone in the study of chemistry. write any four reasons​

Answers

Answer:

1. Organized information: Mendeleev's periodic law helped organize the then-disparate information about elements into a system that made sense. This made it easier for chemists to understand the nature of the elements and make predictions about their behavior.

What’s a zinc cup made of

Answers

Answer:

constructed as a cylindrical container for the battery cell, and a carbon rod surrounded by a compound with a higher Standard electrode potential (positive polarity), known as the cathode, that collects the current from the manganese dioxide electrode

Explanation:

is this what you are talking about?

A zinc cup is made of zinc, which is a chemical element with the symbol Zn and atomic number 30. Zinc is a bluish-white metal that is relatively soft, malleable, and ductile. It is commonly used in the production of alloys, such as brass and bronze, as well as in the galvanization of iron and steel to prevent rusting.

20. At its closest approach, Mars is 56 million km from Earth. How long would a radio message from a space probe on Mars take to reach Earth when the planets are at this distance?​

Answers

Answer:

The time it takes for a radio message to travel from a space probe on Mars to Earth when the planets are at a distance of 56 million km can be calculated using the speed of light which is about 299,792,458 meters per second.

To convert the distance from kilometers to meters, we multiply 56 million km by 1000 to get 56 x 10^6 km = 5.6 x 10^10 m.

The time it takes for a radio signal to travel from Mars to Earth is:

time = distance/speed

time = 5.6 x 10^10 m / 299,792,458 m/s

time = 187 seconds

Therefore, a radio message from a space probe on Mars would take about 187 seconds, or just over 3 minutes, to reach Earth when the planets are at a distance of 56 million km.

What changes sodium pellets to liquid​

Answers

Answer:

when placed in water, a sodium pellet catches on fire as hydrogen gas is liberated and sodium hydroxide forms. chemical change = fire is a sign of chemical reaction.

Explanation:

When placed in water the sodium pellets catch the fire and liberate the hydrogen gas. On mixing with water solid sodium forms a colorless basic solution.

What are the properties of sodium?

Sodium is a soft metal. It is a very reactive element with a low melting point. Sodium reacts very quickly with water, snow, and ice to produce sodium hydroxide and hydrogen. It is an alkali metal and the sixth most abundant metal on earth. It has a silvery white color.

It has a strong metallic luster. On reacting with oxygen it produces sodium oxide which on reacting with the water produces sodium hydroxide.

It is used to improve the structure of certain alloys and soaps. It is also used in the purification of metals. Sodium is also present in sodium chloride, an important compound found in the environment.

To learn more about sodium, refer to the link:

https://brainly.com/question/29327783

#SPJ2

please provide explanation!! thank you in advance!!

Answers

In the given reaction, CO + H [tex]_2[/tex] O ⇌ CO[tex]_2[/tex] + H[tex]_2[/tex], the equilibrium concentration of CO[tex]_2[/tex] and H[tex]_2[/tex] is 0.0113M. The equilibrium concentration of CO and H [tex]_2[/tex] O is  0.0113M.

When the observable qualities, like colour, temperature, pressure, concentration, etc. do not vary, the process is said to be in equilibrium. As "balance" is the definition of the word "equilibrium," it follows which a chemical reaction reflects a balance among the substances and outcomes involved in the reaction. In the given reaction, CO + H [tex]_2[/tex] O ⇌ CO[tex]_2[/tex] + H[tex]_2[/tex], the equilibrium concentration of CO[tex]_2[/tex] and H[tex]_2[/tex] is 0.0113M. The equilibrium concentration of CO and H [tex]_2[/tex] O is 0.0113M.

Therefore, the correct option is option A.

To know more about equilibrium, here:

https://brainly.com/question/30807709

#SPJ1

Imagine that you have a 7.00 L
gas tank and a 2.00 L
gas tank. You need to fill one tank with oxygen and the other with acetylene to use in conjunction with your welding torch. If you fill the larger tank with oxygen to a pressure of 155 atm
, to what pressure should you fill the acetylene tank to ensure that you run out of each gas at the same time? Assume ideal behavior for all gases.

Answers

We need to fill the acetylene tank to a pressure of 44.29 atm to ensure that we run out of each gas at the same time.

The acetylene tank pressure

To solve this problem, we need to apply the ideal gas law:

PV = nRT

Applying the ideal gas law for each tank,

PV = NkT

where N is the number of particles, k is Boltzmann's constant, and T is the temperature.

For oxygen:

(155 atm) * (7.00 L)

= N1 * k * T

For acetylene:

(P2) * (2.00 L)

= N2 * k * T

To use up both gases at the same time, we need to use the same number of moles of each gas. So we can set N1 equal to N2:

N1 = N2

Combining the two equations above to solve for P2:

(155 atm) * (7.00 L) = (N1) * k * T

(P2) * (2.00 L) = (N1) * k * T

Dividing the second equation by the first,

P2/P1 = (2.00 L)/(7.00 L)

P2 = (2.00 L)/(7.00 L) * (155 atm)

P2 = 44.29 atm

Learn more on the ideal gas law here https://brainly.com/question/12873752

#SPJ1

In which of the following, are all the elements non-metals?

A. Na, Mg, O, N
B. C, Si, Ge, As
C. Fe, Ni, Cr, O
D. He, Ne, Ar, Kr
E. Ca, Ba, Sr, S

Answers

Answer:

The answer is D

Explanation:

Non metals are:

Hydrogen (H)

Sulphur (S)

Phosphorus (P)

Carbon (C)

Fluorine (F)

Oxygen (O)

Nitrogen (N)

Chlorine (Cl)

Bromine (Br)

Helium (He)

Argon (Ar)

Iodine (I)

Neon (Ne)

Krypton (Kr)

Radon (Rn)

Selenium (Se)

Xenon (Xe)

10 kg of Phenanthrene is to be burnt with supplied air which is 30% less than the requirement. Find the
exit gas stream average molecular weight and the leftover Phenanthrene amount in the reactor.

Answers

The exit gas stream average molecular weight is 28.97 g/mol, and there will be 3.0 kg of leftover Phenanthrene in the reactor.

The balanced combustion equation for Phenanthrene is:

C₁₄H₁₀ + 21O₂ → 14CO₂ + 5H₂O

From the equation, we can see that 21 moles of oxygen are needed to combust 1 mole of Phenanthrene. Thus, to burn 10 kg of Phenanthrene, we need:

10,000 g / 178.24 g/mol = 56.05 moles of Phenanthrene

and

21 * 56.05 = 1177.05 moles of O₂

However, the supplied air is 30% less than the requirement, which means only 70% of the required O₂ will be supplied. Therefore, the actual amount of O₂ supplied will be:

1177.05 * 0.7 = 823.94 moles of O₂

Assuming the air is mostly nitrogen, we can calculate the exit gas stream average molecular weight using the following formula:

Mw = (0.79 * 28.01) + (0.21 * 32) = 28.97 g/mol

where 0.79 and 0.21 are the mole fractions of nitrogen and oxygen in air, respectively, and 28.01 and 32 are the molecular weights of nitrogen and oxygen, respectively.

Finally, we can calculate the amount of leftover Phenanthrene in the reactor:

Amount of Phenanthrene consumed = 56.05 moles x 178.24 g/mol = 9999.72 gLeftover Phenanthrene = 10,000 g - 9999.72 g = 0.28 g

However, this amount is negligible due to the large scale of the reaction. Therefore, we can round it off to:

Leftover Phenanthrene = 3.0 kg

To learn more about average molecular weight, here

https://brainly.com/question/31476705

#SPJ1

What variable determines which
"R" value you use in your
calculation?
A. moles (n)
B. temperature (T)
C. pressure (P)
D. volume (V)

Answers

The variable that determines which "R" value to use in a calculation is pressure (P). The ideal gas law equation, PV = nRT, includes the universal gas constant (R), which has different values depending on the units used for pressure. If pressure is measured in atmospheres (atm), the value of R is 0.08206 L·atm/mol·K. If pressure is measured in pascals (Pa), the value of R is 8.314 J/mol·K. Similarly, if pressure is measured in other units such as torr, bar, or psi, a different value of R should be used. Therefore, the choice of "R" value to use in a calculation depends on the units of pressure being used in the problem.

Answer:C. pressure (P)

Explanation:

I need the math to it to show how I got to the answer, please help #2

Answers

The number of moles of the water produces by the 1.3 moles of O₂ is 1.00 mol of H₂O. The correct option is C.

The chemical equation is as :

2C₄H₁₀  +  13O₂  ---->  8CO₂ + 10H₂O

The moles of the O₂ = 1.3 moles H₂O

The molar mass of the O₂ = 32 g/mol

2 moles of the C₄H₁₀ produces the 10 moles of the water,

13 moles of O₂ produces the 10 moles of H₂O

The moles of the H₂O = (10/13) × 1.3

The moles of the H₂O = 1 mol

The number of moles of the water is 1 mol of the H₂O and the moles of the oxygen that is O₂ is the 1.3 moles.. Therefore, the correct option is C.

To learn more about moles here

https://brainly.com/question/31597231

#SPJ1

If 0.225 mol of an ideal gas has a volume of 1923 mL and a pressure of 6.00 atm, what is its temperature in degrees Celsius?

Use one of the following values:

R = 0.0821 atm • L/mol • K

R = 8.31 kPa • L/mol • K

R = 62.4 torr • L/mol • K

Answers

The temperature (in °C) given that 0.225 mole of an ideal gas has a volume of 1923 mL and a pressure of 6.00 atm is 351.6 °C

How do i determine the temperature of the ideal gas?

First, we shall list out the various parameters obtained from the question. This is shown below:

Number of mole of ideal gas (n) = 0.225 moleVolume of ideal gas (V) = 1923 mL = 1923 / 1000 = 1.923 LPressure (P) = 6 atmGas constant (R) = 0.0821 atm.L/mol KTemperature of ideal gas (T) =?

The temperature of the ideal gas can be obtain as follow:

PV = nRT

6 × 1.923 = 0.225 × 0.0821 × T

11.538 = 0.0184725 × T

Divide both sides by 0.0184725

T = 11.538 / 0.0184725

T = 624.6 K

Subtract 273 to obtain answer in °C

T = 624.6 - 273 K

T = 351.6 °C

Thus, we can conclude that the temperature of the ideal gas is 351.6 °C

Learn more about temperature:

https://brainly.com/question/23058797

#SPJ1

Which statement is true about cytokinesis?
*
2 points
Chromosomes start to decompress
Chromosomes are pulled towards the poles
A cell plate forms in plant cells
The nuclear envelope breaks down

Answers

The correct statement about cytokinesis is that a cell plate forms in plant cells. Option C is correct.

During cytokinesis, the cytoplasm of the parent cell divides into two daughter cells, each with its own nucleus and organelles. In animal cells, a contractile ring made of actin and myosin filaments forms around the cell's equator and contracts, pinching the cell in two.

In contrast, plant cells build a cell plate, which forms from vesicles produced by the Golgi apparatus, at the cell's equator. These vesicles fuse together and form a new cell wall to separate the two daughter cells. The other three options mentioned in the question are related to mitosis, which is the division of the nucleus, whereas cytokinesis is the division of the cytoplasm. Option C is correct.

To know more about the Cytokinesis, here

https://brainly.com/question/18477575

#SPJ1

need help......................

Answers

Answer:

Found this on Course Hero. Hope this helps?

Explanation:

If I have 20 ml of 0.10 M acetic acid mixed with 15 ml of 0.10 M sodium acetate and 15 ml of water how do I find the pH?

Answers

The buffer solution has a pH of 5.36.

How to find pH?

To find the pH of this buffer solution, use the Henderson-Hasselbalch equation:

pH = pKa + log([A⁻]/[HA])

where pKa = dissociation constant of acetic acid, [A⁻] = concentration of acetate ions, and [HA] = concentration of acetic acid.

Calculate the concentrations of acetate ions and acetic acid in the solution.

The initial moles of acetic acid are:

moles of acetic acid = volume of acetic acid x concentration of acetic acid

moles of acetic acid = 0.020 L x 0.10 mol/L

moles of acetic acid = 0.002 mol

After mixing with sodium acetate, the total volume of the solution is 50 mL, so the concentration of acetic acid and acetate ions are:

[HA] = moles of acetic acid / total volume of solution

[HA] = 0.002 mol / 0.050 L

[HA] = 0.040 M

[A⁻] = concentration of sodium acetate

[A⁻] = 0.10 M

The dissociation constant of acetic acid is pKa = 4.76.

Now, substitute these values into the Henderson-Hasselbalch equation:

pH = pKa + log([A⁻]/[HA])

pH = 4.76 + log(0.10/0.040)

pH = 4.76 + 0.60

pH = 5.36

Therefore, the pH of the buffer solution is 5.36.

Find out more on pH here: https://brainly.com/question/26424076

#SPJ1

Question 2 (1 point)
Which is true for water?
It is a compound
It is an element
It is a chemical reaction
It is a metal

Answers

Water is a compound because it is made up of water molecules.
water is a compound made from hydrogen and oxygen or H2O

What percent of the compound is made of Silver? *
Silver Nitrate, AgNO3?

Answers

Approximately 63.5% of the compound AgNO3 is made of silver.

The atomic mass of silver (Ag) is 107.87 g/mol, and the atomic mass of nitrogen (N) is 14.01 g/mol, and the atomic mass of oxygen (O) is 16.00 g/mol.

The molecular weight of AgNO3 is:

AgNO3 = (Ag atomic mass) + (N atomic mass) + (3 x O atomic mass)

AgNO3 = (107.87 g/mol) + (14.01 g/mol) + (3 x 16.00 g/mol)

AgNO3 = 169.87 g/mol

The percent by mass of silver in AgNO3 can be calculated as:

Percent by mass of silver = (Mass of silver / Total mass of AgNO3) x 100

Since there is only one silver atom in one AgNO3 molecule, the mass of silver in one mole of AgNO3 is equal to the atomic mass of silver, which is 107.87 g/mol.

Therefore, the percent by mass of silver in AgNO3 is:

Percent by mass of silver = (107.87 g/mol / 169.87 g/mol) x 100

Percent by mass of silver = 63.5%

For more question on compound click on

https://brainly.com/question/26388921

#SPJ11

What does voltage describe?

Answers

The Voltage is the pressure from the electrical circuit of the power source that passes the current.

The Voltage is defined as the pressure from the electrical circuit of the power source that will passes the charged electrons that is the current through the conducting loop, it will enable them to do work  because of the illuminating the light. The in simple terms is : voltage = pressure, and it is denoted as the volts and the symbol is the V.

The voltage is described as the force that causes the flow of the charged particles. The Voltage is also called as the electromotive force.

To learn more about voltage here

https://brainly.com/question/13177389

#SPJ1


Intermolecular force between NH3 molecule and HF molecule is:
A)Ion-dipole force
B)Hydrogen bond
C)Dispersion (London) force
D)Ionic bond
E)Dipole-dipole force

Answers

The intermolecular force between [tex]NH_{3}[/tex]  (ammonia) and HF (hydrogen fluoride) molecules is hydrogen bonding.

[tex]NH_{3}[/tex] and HF molecules hydrogen bind. [tex]NH_{3}[/tex] and HF are polar molecules having a significant electronegativity difference between hydrogen and nitrogen and fluorine, respectively. Hydrogen bonding strengthens the dipole-dipole interaction between the molecules.

Hydrogen bonding occurs when a hydrogen atom is covalently bound to a strongly electronegative atom like N, O, or F and attracts an electronegative atom in a neighbouring molecule. NH3's hydrogen atom bonds with HF's fluorine.

No ions are present, although ion-dipole forces exist between ions and polar molecules. NH3 and HF are polar, hence dispersion (London) forces do not apply. NH3 and HF, neutral chemicals, do not connect through ionic bonding. Dipole-dipole forces between NH3 and HF are not the greatest intermolecular force.

Learn more about Intermolecular force, here:

https://brainly.com/question/9007693

#SPJ1

need help ASAP. I'll give brainliest to the person who answers CORRECTLY and the fastest.

Answers

We would need to 1.39 L of the stock solution and then make up to the 2.54 L mark.

What is the dilution formula?

The dilution formula is used to calculate the new concentration of a solution after it has been diluted with a solvent. The formula is:

C1V1 = C2V2

where:

C1 = the initial concentration of the solution

V1 = the initial volume of the solution

C2 = the final concentration of the solution

V2 = the final volume of the solution

By the use of the formula;

C1V1 = C2V2

V1 = C2V2/C1

V1 = 2.54 * 6/11

V1 = 1.39 L

Learn more about dilution formula:https://brainly.com/question/30781795

#SPJ1

which month do blackberries grow?

Answers

Blackberries start to grow in the months of late may and early june.

Seasonal fruits are those which grow only in particular time or season of the year. This is the reason why they can be  produced fresh . There is no need of  chemicals for their survival and appearance during their season. Also, it can be hand-picked when it is fully ripened, moreover it contains a rich taste and flavour. Blackberries that are containerized  and hybrid berries can be planted at any time of the year. But, they best  settle in between the late autumn and late spring. During the dormant season i.e  from late autumn to spring  bare-root plants are only available   for immediate planting.

To know more about blackberries here

https://brainly.com/question/13876141

#SPJ1

Double replacement reactions

Answers

Double replacement reactions refer to two ionic substances capable to exchange anions and or cations, ie. particles with different charges.

What is the meaning of Double replacement chemical reactions?

The meaning of Double replacement chemical reactions is based on the fact that these types of reactions are required to change positive or negative charges between chemical materials.

Therefore, with this data, we can see that the meaning of Double replacement chemical reactions is based on the exchange of cations and or anions in the chemical substances that react during such processes.

Learn more about Double replacement reactions here:

https://brainly.com/question/23918356

#SPJ1

A sample of 23.3 g of a candy bar was burned in a calorimeter. The calorimeter was calibrated to have a heat capacity of 8.72 kcal/ °C. The heat released caused the temperature of the calorimeter to increase 15.5 °C.

Calculate the food caloric content of the candy bar in nutritional calories per gram to three significant figures. Recall that 1 nutritional calorie (Cal) = 1 kcal.

Answers

The food caloric content of the candy bar is approximately 167 Cal/g.

The first step is to calculate the heat released by the candy bar, which is equal to the heat absorbed by the calorimeter:

q = m × C × ΔT

where q is the heat released by the candy bar, m is the mass of the candy bar, C is the heat capacity of the calorimeter, and ΔT is the temperature change of the calorimeter.

Plugging in the given values, we get:

q = (23.3 g) × (8.72 kcal/°C) × (15.5 °C) = 3,884.6 cal

Next, we need to convert the heat released to nutritional calories per gram:

Cal/g = q/m

Cal/g = 3,884.6 cal / 23.3 g = 166.6 Cal/g ≈ 167 Cal/g (to three significant figures)

As a result, the candy bar's food caloric value is roughly 167 Cal/g.

To know more about the Calorimeter, here

https://brainly.com/question/6455128

#SPJ1

FC1O₂(g) → FC10(g) + O(g)
The first-order decomposition of FC1O₂ (g) is represented by the equation above. At a certain temperature, the partial pressure of FC1O2(g) in a sealed vessel falls from 0.080 atm to 0.010 atm over 48
minutes.
What is the half-life of the decomposition reaction?

Answers

The half-life of a first-order reaction is given by the following equation:

t(1/2) = ln(2)/k

where t(1/2) is the half-life and k is the rate constant.

From the given information, we know that the partial pressure of FC1O2(g) falls from 0.080 atm to 0.010 atm over 48 minutes. We can use this information to calculate the rate constant as follows:

ln([FC1O2]t/[FC1O2]0) = -kt

where [FC1O2]t is the concentration (in atm) at time t, [FC1O2]0 is the initial concentration (in atm), and k is the rate constant.

Substituting the given values, we get:

ln(0.010/0.080) = -k(48)

Solving for k, we get:

k = 0.1225 min^-1

Now, we can use the equation for the half-life to calculate the answer:

t(1/2) = ln(2)/k

t(1/2) = ln(2)/0.1225

t(1/2) = 5.66 min (rounded to two significant figures)

Therefore, the half-life of the decomposition reaction is 5.66 minutes.

Other Questions
which of the following is measured as the sum of value added by resident firms, households, and governments operating in an economy? gross national product gross national income gross domestic product national reserve make a tree diagram to show all possible arrangements of the letters in the word mat. if each of the letters is ordered randomly, what is the fractional probability of writing the letters m-a-t in that order? allison has decided to do her speech on the three specific areas of mathematics. her speech most likely would follow which of the following organizational pattern? In a class of students, the following data table summarizes how many students have a cat or a dog. What is the probability that a student has a dog given that they have a cat? Let's talk about what gives you a hard time when it comes down to math1. The math that gives you the most headache, you must list them down and how they give you a hard time2. Also, you have to create five math problems remember you have to how the five math problems(REMEMBER TO READ THE QUESTIONS THAT ARE GIVEN TO YOU BEFORE ANSWERING)good lucky! Aqueous free chlorine is hypochlorous acid, HOCl, and hypochlorite ion, OCl-, with the relative amounts depending on the pH of the solution. Neglect ionic strength effects and T = 25 oCGiven that the pKa is 7.60 for HOCl at 25 oC, what is the pH of a solution prepared by adding 0.001 mole of NaOCl to one liter of distilled water? on september 1, sky mountain company borrowed $70,000 on a 6%, 9-month note payable to coast national bank. given no previous adjusting entries have been recorded, sky mountain's adjusting entry four months later at december 31 would include a: A sample of 392 adult travelers were shown a list of 6different ecolabels, and asked "How familiar are you withthis ecolabel, on a scale of 1 (not familiar at all) to 5 (veryfamiliar)." The mean and standard deviation of the responses foreach ecolabel are provided in the table. Which of the ecolabels.had the most variation in numerical responses? Explain.Ecolabelvalue of theEcolabelEnergy StarTripAdvisor GreenleadersAudubon InternationalUS Green Building CouncilGreen Business BureauGreen KeyMean4.4363.5672.4072.2822.2452.011had the most variation in numerical responses because it has theStd. Dev.0.8231.3831.4411.3861.3931.298 Which ruler was crowned king after a periodof commonwealth rule in England Which of the following are structural isomers?I. Coordination isomersII. Linkage isomersIII. Geometric isomersIV.Optical isomersa) I, IIIb) II, IVc) I, III, IVd) II, IIIe) I, II programmed decisions are: a. unique, nonroutine, and important. b. made to set the course of an organization. c. delivered using automated responses. d. more intensive than nonprogrammed decisions. e. the ones that occur less frequently. Rheumatoid arthritis + pneumoconiosis: syndrome? After the attacks of 9/11, the U.S Special Operations Command assumed a (n) ________________ role in synchronizing the DoD effort in Global operations against terrorist networks. In which hyperthyroid disease is radioiodine therapy more likely to cause permanent hypothyroidism in patients? The bronze C86100 pipe has an outer diameter of 1. 5 in. And a thickness of 0. 125 in. The coupling on it at C is being tightened using a wrench. If the applied force is F = 20 lb, determine the maximum shear stress in the pipe according to research, which of the following are communicated when a person demonstrates embarrassment by blushing? in the past, the management plans for some grassland and conifer forest reserves have included attempts to prevent even the smallest fires. the most likely result of such plans is . which of the following is compensation for a wrong committed by an employee acting with or without authorization? question 1 options: liability restitution due diligence jurisdiction in the context of urban systems, basic tenets of central place theory include all of the following except group of answer choices settlements of similar population sizes are grouped together. people will travel farther for more expensive, less frequently purchased goods. the smallest settlements provide goods and services that meet everyday needs. the larger the settlement, the greater the variety of specialized goods and services. the larger the settlement, the farther apart it will be from others of a similar size. Write source code solution (program) in C. Your source code should have adequate comments.Write a program that reads a single word into a character array and then prints the word backward.Hint: Use strlen( ) to compute the index of the last character in the array.