6. (6 points) Use a truth table to determine if the following is an implication? (ap) NG

There is no valid solution. This implies that the information provided is contradictory or inconsistent. Therefore, we cannot determine the maximum number of staff members in the school based on the given information.

To find the maximum number of staff in the school, we need to determine the number of female staff members. We are given that the principal distributed 90 bangles and 108 sweets to the female staff members, including herself. Let's denote the number of female staff members (excluding the principal) as F.

We can set up the following equations based on the information given:

The number of bangles distributed to female staff members is 90.

The number of sweets distributed to female staff members is 108.

The total number of staff members, including both female and male staff members, is F + 1 (including the principal) + 20 (male staff members).

From equation 1, we have:

90 = F

From equation 2, we have:

108 = F

Since both equations 1 and 2 are equal to F, we can equate them:

90 = 108

This equation is not true.

It's important to note that if the given information was consistent and solvable, we could find the maximum number of staff members by summing the number of female staff members (F), the principal (1), and the male staff members (20)

For more such questions on number

https://brainly.com/question/26460978

#SPJ8

The simplified form of √([tex]42a^4b^6[/tex]) is √(2 × 3 × 7) × [tex]a^2[/tex] × [tex]b^3,[/tex] or equivalently, √[tex]42a^2b^3[/tex].

To simplify the expression √[tex](42a^4b^6)[/tex], we can identify perfect square factors within the square root and simplify them.

First, let's break down 42, [tex]a^4[/tex], and [tex]b^6[/tex] into their prime factorizations:

42 = 2 × 3 × 7

[tex]a^4 = (a^2)^2\\b^6 = (b^3)^2[/tex]

Now, let's simplify the expression by removing perfect square factors from inside the square root:

√([tex]42a^4b^6[/tex]) = √(2 × 3 × 7 × [tex](a^2)^2[/tex] × ([tex]b^3)^2)[/tex]

Taking out the perfect square factors, we have:

√([tex]2 \times 3 \times 7 \times a^2 \times a^2 \times b^3 \times b^3)[/tex]

Simplifying further:

√([tex]2 \times 3 \times 7 \times a^2 \times a^2 \times b^3 \times b^3[/tex]) = √(2 × 3 × 7) × √([tex]a^2 \times a^2)[/tex]  √([tex]b^3 \times b^3[/tex])

The square root of the perfect squares can be simplified as follows:

√([tex]a^2 \times a^2[/tex]) = a × a = [tex]a^2[/tex]

√([tex]b^3 \times b^3[/tex]) = b × b × b = [tex]b^3[/tex]

Substituting the simplified square roots back into the expression:

√(2 × 3 × 7) × √([tex]a^2 \times a^2) \times[/tex] √([tex]b^3 \times b^3[/tex]) = √(2 × 3 × 7) × [tex]a^2 \times b^3[/tex]

Therefore, the simplified form of √([tex]42a^4b^6[/tex]) is √(2 × 3 × 7) × [tex]a^2[/tex] × [tex]b^3,[/tex] or equivalently, √[tex]42a^2b^3[/tex].

for such more question on simplified form

https://brainly.com/question/28357591

#SPJ8

The first derivative is g'(x) = 3 - (1/x). To find the second derivative, we differentiate g'(x) with respect to x, resulting in g''(x) = 1/x². The stationary point occurs when g'(x) = 0, which gives x = 1/3.

To find the first derivative of g(x) = 3x - ln(3x), we differentiate term by term using the power rule and the derivative of the natural logarithm. The derivative of 3x is 3, and the derivative of ln(3x) is (1/x). Therefore, the first derivative is g'(x) = 3 - (1/x).

To find the second derivative, we differentiate g'(x) with respect to x. The derivative of 3 is 0, and the derivative of (1/x) is -1/x². Therefore, the second derivative is g''(x) = 1/x².

To find the stationary point, we set the first derivative equal to zero and solve for x:

3 - (1/x) = 0

3x = 1

x = 1/3

So, the stationary point occurs at x = 1/3.

To classify this stationary point, we evaluate the second derivative at x = 1/3:

g''(1/3) = 1/(1/3)² = 9

Since g''(1/3) = 9 > 0, the second derivative is positive at x = 1/3, indicating a concave-up shape. Therefore, the stationary point at x = 1/3 is a local minimum.

In summary, the first derivative of g(x) = 3x - ln(3x) is g'(x) = 3 - (1/x), and the second derivative is g''(x) = 1/x². The stationary point occurs at x = 1/3, and it is classified as a local minimum since g''(1/3) = 9 > 0.

Learn more about derivative here:

https://brainly.com/question/29144258

#SPJ11

The perimeter of the polygon is 51.8, the correct option is A.

We are given that;

One side of triangle=18.9

Other side=15.9

Now,

Its the sum of length of the sides used to made the given figure. A regular figure with n-sides has n equal sides in it, and they are the only parts of it(that means, nothing more than those equal lengthened n sides).

x+10=18.9

x=18.9-10

x=8.9

y=x (tangent from same point)

y=8.9

15.9-8.9=7

Perimeter= 10+x+y+7+7+10

Substituting the values

=10+8.9+8.9+7+7+10

=20+17.8+14

=51.8

Therefore, by perimeter the answer will be 51.8.

Learn more about perimeter here:

https://brainly.com/question/10466285

#SPJ1

The cost involved to increase production from 70 to 80 units can be determined by finding the total cost over this interval.We need to integrate this function with respect to q from 70 to 80.

The resulting integral will give us the cost involved in producing the additional 10 units.The marginal-cost function dc/dq represents the rate at which the cost (c) changes with respect to the quantity produced (q). To find the cost involved in increasing production from 70 to 80 units, we integrate the marginal-cost function over this interval.

Integrating the marginal-cost function, we have:

∫(dc/dq) dq = ∫(0.4q + 9) dq

Integrating 0.4q with respect to q gives 0.2q^2, and integrating 9 with respect to q gives 9q. Therefore, the integral becomes:

0.2q^2 + 9q + C

To find the cost involved in increasing production from 70 to 80 units, we evaluate this expression at q = 80 and q = 70, and subtract the two values:

Cost involved = (0.2(80)^2 + 9(80)) - (0.2(70)^2 + 9(70))

Simplifying this expression gives us the cost involved in increasing production from 70 to 80 units.

To learn more about integrate click here :  brainly.com/question/30333196

#SPJ11

The function g is continuous on the interval [-10, 10] after redefining G(t) = 0 at x = t. The graph of g will exhibit a decreasing line (for x < t), a discontinuity at x = t, and a decreasing exponential curve (for x > t).

To define the function g on S, we have two cases:

Case 1: For x in the interval [-10, t)

  G(x) = -|x - t|

Case 2: For x in the interval [t, 10]

  G(x) = 1 - e^(x - t)

To plot the function g on the graph, we need to determine its behavior for different values of x within the interval [-10, 10].

1. For x < t (-10 ≤ x < t):

  In this interval, G(x) = -|x - t|.

  The graph will be a decreasing line with a slope of -1 until it reaches the value of t on the x-axis.

2. For x = t:

  G(x) is not defined at this point as we have a discontinuity. However, we can consider the left-hand limit and the right-hand limit separately.

  Left-hand limit (x → t-):

  G(x) = -|x - t| approaches 0 as x approaches t from the left side.

  Right-hand limit (x → t+):

  G(x) = 1 - e^(x - t) approaches 1 - e^0 = 0 as x approaches t from the right side.

  Since the left-hand limit and the right-hand limit both approach the same value (0), we can say that the limit of G(x) as x approaches t exists and is equal to 0.

3. For x > t (t ≤ x ≤ 10):

  In this interval, G(x) = 1 - e^(x - t).

  The graph will be a decreasing exponential curve that approaches the value of 1 as x approaches 10.

Now, let's discuss the continuity of g on S.

The function g will be continuous on S if and only if it is continuous at every point within the interval [-10, 10].

For all x ≠ t, g(x) is a combination of continuous functions (a linear function and an exponential function), and thus it is continuous.

At x = t, we have a discontinuity due to the absolute value function. However, as discussed above, the left-hand limit and the right-hand limit both approach 0, which means the function has a removable discontinuity at x = t. We can redefine g(t) as G(t) = 0 to make it continuous at x = t.

Therefore, the function g is continuous on S after redefining G(t) = 0 at x = t.

Note: The graph of g can be visualized for a specific value of t, but since your Student ID's 7th digit (t) is not provided, the specific shape of the graph cannot be illustrated without that information.

To know more about interval refer here:

https://brainly.com/question/29560066#

#SPJ11

The five-number summary for given ages is 52, 60.5, 66, 78, 83 (rounded to one decimal), and the interquartile range is 17.5 (rounded to one decimal).

Given data set of ages of the Supreme Court Justices:

61 80 68 83 78 66 62 56 52

a) Five-number summary: The five number summary includes 5 numbers, namely minimum, first quartile(Q1), median, third quartile(Q3), and maximum.

The five-number summary can be calculated as below:

Minimum (min) = 52

Q1 = 60.5 (Average of 56 and 62)

Median = 66

Q3 = 78 (Average of 80 and 83)

Maximum (max) = 83

Five-number summary = 52, 60.5, 66, 78, 83 (round to one decimal)

b) Interquartile range: The interquartile range (IQR) is the difference between the third quartile (Q3) and the first quartile (Q1).

The IQR is calculated as follows:

IQR = Q3 - Q1

= 78 - 60.5

= 17.5 (rounded to one decimal)

Answer: Five-number summary = 52, 60.5, 66, 78, 83 (rounded to one decimal)

Interquartile range = 17.5 (rounded to one decimal)

Conclusion: Therefore, the five-number summary for given ages is 52, 60.5, 66, 78, 83 (rounded to one decimal), and the interquartile range is 17.5 (rounded to one decimal).

To know more about range visit

https://brainly.com/question/29463327

#SPJ11

The exact value of the given expression is (2 - √6 - √2) / 2.

We are supposed to find the exact value of the given expression 1 - 2 sin 2105° by using a double angle formula.

The double angle formula for sin2θ is given by sin2θ=2sinθcosθ.

Now, let's use this double angle formula to simplify the given expression.

Solution:Here is the given expression: 1 - 2 sin 2105°

We need to find the exact value of the given expression using the double angle formula.

Let's begin by finding sin 2θ.Let's take θ = 105°.

Then, we have: sin 2θ = 2 sin θ cos θ

Now, we know that sin 2θ = 2 sin θ cos θsin 105° = sin (45° + 60°) = sin 45° cos 60° + cos 45° sin 60°

We know that: sin 45° = cos 45° = √2 / 2and sin 60° = √3 / 2, cos 60° = 1 / 2

Now, substituting the values, we get:sin 2 x 105° = √2 / 2 × 1 / 2 + √2 / 2 × √3 / 2= (√6 + √2) / 4

Therefore, sin 210° = sin 2 x 105° / 2= (√6 + √2) / 4

Now, let's substitute this value in the given expression, we get:1 - 2 sin 2105°= 1 - 2 × (√6 + √2) / 4= 1 - (√6 + √2) / 2= (2 - √6 - √2) / 2

Therefore, the exact value of the given expression is (2 - √6 - √2) / 2.

To know more about exact value, visit:

https://brainly.com/question/30754075

#SPJ11

Answer:There are no values of c that satisfy the equation in the conclusion of the Mean Value Theorem for this function and interval.

Step-by-step explanation:

Find the value or values of c that satisfy the equation f'(c) = (f(b) - f(a))/(b - a) in the conclusion of the Mean Value Theorem for the function and interval.

Given: f(x) = ln(x - 4), (5, 8)

First, let's find the derivative of f(x):

f'(x) = 1/(x - 4)

Now, we can calculate f'(c) using the Mean Value Theorem equation:

f'(c) = (f(8) - f(5))/(8 - 5)

Substituting the values:

f'(c) = (ln(8 - 4) - ln(5 - 4))/(8 - 5)

f'(c) = (ln(4) - ln(1))/3

f'(c) = ln(4)/3

To find the value of c, we need to solve the equation ln(4)/3 = ln(c - 4)/3.

Since the natural logarithm is a one-to-one function, we can equate the arguments inside the logarithm:

4 = c - 4

Solving for c:

c = 8

Therefore, the value of c that satisfies the equation is c = 8.

2. Identify the critical points and find the maximum and minimum values on the given interval.

Given: f(x) =[tex]x^3 - 12x + 3[/tex] ;

interval: (-3, 5)

To find the critical points, we need to find the derivative of f(x) and set it equal to zero:

f'(x) = [tex]3x^2 - 12[/tex]

Setting f'(x) = 0:

[tex]3x^2 - 12 = 0[/tex]

[tex]x^2 - 4 = 0[/tex]

(x - 2)(x + 2) = 0

The critical points are x = -2 and x = 2.

To determine the maximum and minimum values, we need to evaluate f(x) at the critical points and endpoints:

f(-3) =[tex](-3)^3 - 12(-3) + 3[/tex]

= -27 + 36 + 3

= 12

f(5) = [tex](5)^3 - 12(5) + 3[/tex]

= 125 - 60 + 3

= 68

f(-2) =[tex](-2)^3 - 12(-2) + 3[/tex]

= -8 + 24 + 3

= 19

f(2) =[tex](2)^3 - 12(2) + 3[/tex]

= 8 - 24 + 3

= -13

Therefore, the critical points and their corresponding function values are:

(-3, 12), (-2, 19), (2, -13), and (5, 68).

The maximum value is 68, which occurs at x = 5, and the minimum value is -13, which occurs at x = 2.

3. Find the limit: lim x->0[tex](x^2 - 5x + 10)/(8.5x^2 + 3)[/tex]

To find the limit as x approaches 0, we can directly substitute 0 into the expression:

lim x->0[tex](x^2 - 5x + 10)/(8.5x^2 + 3)[/tex]

= [tex](0^2 - 5(0) + 10)/(8.5(0)^2 + 3)[/tex]

= (0 - 0 + 10)/(0 + 3)

= 10/3

Therefore, the limit as x approaches 0 is 10/3.

4

. Find the value or values of c that satisfy the equation f'(c) = (f(b) - f(a))/(b - a) in the conclusion of the Mean Value Theorem for the function and interval.

Given: f(x) = [tex]x^2 + 2x + 2[/tex], interval: (3, 21)

First, let's find the derivative of f(x):

f'(x) = 2x + 2

Now, we can calculate f'(c) using the Mean Value Theorem equation:

f'(c) = (f(21) - f(3))/(21 - 3)

Substituting the values:

f'(c) =[tex]((21)^2 + 2(21) + 2 - (3)^2 - 2(3) - 2)/(21 - 3)[/tex]

f'(c) = (441 + 42 + 2 - 9 - 6 - 2)/18

f'(c) = 468/18

f'(c) = 26/1.5

f'(c) = 52/3

To find the value of c, we need to solve the equation 52/3 = (f(21) - f(3))/(21 - 3).

Simplifying further:

52/3 = (f(21) - f(3))/18

52 * 18 = 3(f(21) - f(3))

936 = 3(f(21) - f(3))

To find the value of f(21) - f(3), we substitute the function values into the equation:

f(21) - f(3) =[tex](21)^2 + 2(21) + 2 - (3)^2 - 2(3) - 2[/tex]

f(21) - f(3) = 441 + 42 + 2 - 9 - 6 - 2

f(21) - f(3) = 468

Substituting this back into the equation:

936 = 3(468)

936 = 1404

The equation 936 = 1404 is not true, so there is no value of c that satisfies the equation.

Therefore, there are no values of c that satisfy the equation in the conclusion of the Mean Value Theorem for this function and interval.

To know more about Mean Value Theorem visit:

https://brainly.com/question/30403137

#SPJ11

The component vector of v = (5,5,5) in V = R relative to the ordered basis B = {(-1,0,0),(0,0,-3),(0,-2,0)} is (10, -5, 0).

To determine the component vector of v in V relative to the ordered basis B, we need to express v as a linear combination of the basis vectors. In this case, we have v = (5,5,5) and the basis vectors are (-1,0,0), (0,0,-3), and (0,-2,0).

We express v as a linear combination of the basis vectors:

By comparing the coefficients of the basis vectors, we can find the values of c₁, c₂, and c3. Equating the corresponding components, we get:

Solving these equations, we find c1 = -10/3, c₂ = -5/3, and c₃ = 0. Therefore, the component vector of v in V relative to the ordered basis B is (c₁, c₂, c₃) = (10, -5, 0).

Learn more about Component vector

brainly.com/question/31400182

#SPJ11

According to the information, we can infer that Victoria must score approximately 94 on test B in order to do equivalently well as she did on test A.

To determine how well Victoria must score on test B to do equivalently well as she did on test A, we need to compare their scores in terms of standard deviations from the mean.

For test A:

To find the number of standard deviations Victoria's score is from the mean on test A, we can use the formula:

where,

X = the score

za = the Z-score

Victoria's score on test A is 1 standard deviation above the mean. Now, let's determine the score Victoria needs to achieve on test B to do equivalently well. We can use the formula:

where,

For test B:

According to the above, Victoria must score approximately 49 on test B to do equivalently well as she did on test A.

Learn more about deviation in: https://brainly.com/question/31835352

#SPJ4

The implicit solution is given by:

[tex]$3y^{\frac{3}{2}} - 6xy^{\frac{1}{2}} - 4x = C$[/tex]

The given differential equation is:

[tex]$$\left(3y^2 - 4xy\right) dx + \left(4xy - 6\right) dy = 0$$[/tex]

To solve this differential equation, we need to find an integrating factor, which is of the form $xy$.

Thus, we have

[tex]$M = 3y^2 - 4xy$ and $N = 4xy - 6$[/tex]

The formula to find the integrating factor is given by:

[tex]$I.F. = e^{\int \frac{\frac{\partial N}{\partial x} - \frac{\partial M}{\partial y}}{M}}dx$[/tex]

Therefore, [tex]$I.F. = e^{\int \frac{\frac{\partial}{\partial x} \left(4xy - 6\right) - \frac{\partial}{\partial y} \left(3y^2 - 4xy\right)}{3y^2 - 4xy}} dx$[/tex]

We have

[tex]$\frac{\partial}{\partial x} \left(4xy - 6\right) = 4y$ and $\frac{\partial}{\partial y} \left(3y^2 - 4xy\right) = 6y - 4x$.[/tex]

Hence, [tex]$I.F. = e^{\int \frac{4y - \left(6y - 4x\right)}{3y^2 - 4xy}} dx$$I.F. = e^{-\frac{1}{2}\int \frac{dy}{y}}$$I.F. = \frac{1}{\sqrt{y}}$[/tex]

Multiplying the given differential equation by the integrating factor, we get: [tex]$\left(3y - \frac{4x}{\sqrt{y}}\right) dx + 4 \sqrt{y} dy = 0$Let $3y - \frac{4x}{\sqrt{y}} = u$ and $4 \sqrt{y} = v$.[/tex]

[tex]Differentiating $u$ w.r.t $x$, we get:$\frac{du}{dx} = 3y' - \frac{4}{2\sqrt{y}}y - \frac{4x}{2\sqrt{y}}y^{-\frac{3}{2}}$$\frac{du}{dx} = 3y' - \frac{2}{\sqrt{y}} - \frac{2x}{y\sqrt{y}}$Differentiating $v$ w.r.t $x$[/tex], we get:

[tex]$\frac{dv}{dx} = 2y'$[/tex]

Comparing these two equations, we have:[tex]$2y' = 4 \Rightarrow y' = 2$[/tex]

Therefore, [tex]$u = 6x + c$ and $v = 4y^{\frac{1}{2}}$$3y - \frac{4x}{\sqrt{y}} = 6x + c$[/tex]

Simplifying this, we have: [tex]$3y^{\frac{3}{2}} - 6xy^{\frac{1}{2}} - 4x = C$[/tex]

Therefore, the implicit solution is given by: [tex]$3y^{\frac{3}{2}} - 6xy^{\frac{1}{2}} - 4x = C$[/tex]

To know more about implicit solution visit:

https://brainly.com/question/28506017

#SPJ11

Given equation: 15/x + 15/y + 5/z – 5 = 0 defines z as a function of x and y.

It can be written as: 5/z = 5 – 15/x – 15/y

Therefore: z = 1/(1/x + 1/y – 1)

Differentiate w.r.t. x:z

[tex][x^2y/xy(y-x)]dx/dx -[xy^2/xy(x-y)]dy/dx/[xy(y-x) + xy(x-y)]^2z[/tex]

= y(y–x)/[x+y–xy]²Dz/dx|(x,y,z)=(9,48,2)

= 48(48 – 9)/[9+48 – 9×48]²= – 216/(29)²

Differentiate w.r.t. y:z

[tex]= [xy^2/xy(x-y)]dx/dy -[x^2y/xy(y-x)]dy/dy/[xy(y-x) + xy(x-y)]^2z \\= x(x-y)/[x+y-xy]^2Dz/dy|(x,y,z)=(9,48,2)= 9(9-48)/[9+48 - 9*48]^2\\= 216/(29)^2[/tex]

Therefore, dz/dx|(x,y,z)=(9,48,2)

= -4.09, dz/dy|(x,y,z)=(9,48,2)= 4.09.

To learn more about Differentiate visit:

brainly.com/question/24062595

#SPJ11

d2y/dx2 = -8x/(7y)

Given the equation 4x^2 + 7y^2 = 10, we can differentiate both sides of the equation implicitly with respect to x.

Taking the

derivative

of the left side with respect to x gives us: 8x + 14yy' = 0.

To isolate y', we can solve for y': y' = -8x/(14y).

Now, to find the second derivative, we differentiate y' with respect to x:

d^2y/dx^2 = d/dx (-8x/(14y)).

Using the quotient rule, we can differentiate the numerator and denominator separately:

= [(14y)(-8) - (-8x)(14y')] / (14y)^2.

Simplifying the expression, we get:

= (-112y + 8xy') / (14y)^2.

Substituting the value of y' we found earlier, we have:

= (-112y + 8x(-8x/(14y))) / (14y)^2.

Simplifying further, we get:

=

(-112y - 64x^2) / (14y)^2.

To learn more about  

d2y/dx2

brainly.com/question/2351428

#SPJ11

The difference quotient for the function f(x) is given by f(x+h)-f(x)/h. We are required to find the difference quotient for f(x) = 2x² - 4x + 5.

Let's find the difference quotient by substituting the given values into the formula:difference quotient = f(x + h) - f(x) / hdifference quotient = [2(x + h)² - 4(x + h) + 5] - [2x² - 4x + 5] / hdifference quotient = [2(x² + 2xh + h²) - 4x - 4h + 5] - [2x² - 4x + 5] / hdifference quotient = [2x² + 4xh + 2h² - 4x - 4h + 5 - 2x² + 4x - 5] / hdifference quotient = [4xh + 2h² - 4h] / hdifference quotient = 2x + 2h - 2 Simplifying the expression, we get the difference quotient as 2x - 2 + 2h. Therefore, the difference quotient for f(x) = 2x² - 4x + 5 is 2x - 2 + 2h.A difference quotient is a method of calculating the derivative of a function.

The difference quotient formula is [f(x + h) - f(x)] / h, where h is the change in x and f(x + h) - f(x) is the change in y.

To know more about division method visit:

https://brainly.com/question/32561041

#SPJ11

The given function is f(x) = 2x² - 4x + 5. To find the difference quotient, we will use the formula as given:Difference quotient= [f(x+h)-f(x)]/h Now, substitute the values in the above formula:

[tex]f(x) = 2x² - 4x + 5f(x+h) = 2(x+h)² - 4(x+h) + 5= 2(x²+2xh+h²) - 4x - 4h + 5[As x²[/tex] remains x²,

but the other terms contain x and h]Therefore,

Difference quotient

[tex]= [f(x+h)-f(x)]/h= [2(x²+2xh+h²) - 4x - 4h + 5 - (2x² - 4x + 5)]/h= [2x² + 4xh + 2h² - 4x - 4h + 5 - 2x² + 4x - 5]/h= [4xh + 2h² - 4h]/h= 2x + 2h - 4[/tex]

Thus, the difference quotient for f(x) = 2x² - 4x + 5 is 2x + 2h - 4, and this is the simplified answer.In more than 100 words:

Difference quotient is used in calculus to describe how a function changes as it is evaluated over two points. Given a function, f(x), the difference quotient can be found by using the formula (f(x+h) - f(x))/h.

This gives us

[tex]f(x+h) = 2(x²+2xh+h²) - 4(x+h) + 5 andf(x) = 2x² - 4x + 5.[/tex]

Then, we simplify the formula by expanding and combining like terms.

This gives us the difference quotient 2x + 2h - 4.

To know more about quotient visit:

https://brainly.com/question/16134410

#SPJ11

A basis for the orthogonal complement L⊥ is {v₁, v₂} = {[7/2, 1, 0], [7/2, 0, 1]}.

To find a basis for the orthogonal complement L⊥ of L, we need to determine the vectors in R³ that are orthogonal to all vectors in L.

Given that a basis for L is {2, -7, -7}, we can find a basis for L⊥ by finding the vectors that satisfy the dot product condition:

u · v = 0

for all vectors u in L and v in L⊥.

Let's find the orthogonal complement L⊥.

First, we can rewrite the given basis for L as a single vector:

u = [2, -7, -7]

To find a vector v that satisfies the dot product condition, we can set up the equation:

[2, -7, -7] · [a, b, c] = 0

This gives us the following equations:

2a - 7b - 7c = 0

Simplifying, we have:

2a = 7b + 7c

We can choose values for b and c and solve for a to obtain different vectors in L⊥.

Let's set b = 1 and c = 0:

2a = 7(1) + 7(0)

2a = 7

a = 7/2

One vector that satisfies the dot product condition is v₁ = [7/2, 1, 0].

Let's set b = 0 and c = 1:

2a = 7(0) + 7(1)

2a = 7

a = 7/2

Another vector that satisfies the dot product condition is v₂ = [7/2, 0, 1].

Therefore, a basis for the orthogonal complement L⊥ is {v₁, v₂} = {[7/2, 1, 0], [7/2, 0, 1]}.

Visit here to learn more about orthogonal complement brainly.com/question/31500050
#SPJ11

There is not enough evidence to prove that Machine B is performing better than Machine A or The two machines are showing different qualities of performance.

Hypothesis Testing: In statistics, hypothesis testing is used to decide whether or not a particular statement about a population is likely to be true. The null hypothesis, alternative hypothesis, alpha level, test statistic, and p-value are all used in hypothesis testing. The following are the steps involved in hypothesis testing:

Step 1: State the null hypothesis H0.

Step 2: Set up the alternative hypothesis Ha.

Step 3: Determine the significance level α.

Step 4: Compute the test statistic.

Step 5: Determine the p-value.

Step 6: Make a decision and interpret the results.

If the p-value is less than the level of significance, we reject the null hypothesis, which means that the results are statistically significant. If the p-value is greater than the level of significance, we fail to reject the null hypothesis. Hence, the results are not statistically significant.

Let's see how to solve this problem. The hypothesis to be tested is:

a) Machine B is performing better than machine A.

b) The two machines are showing different qualities of performance.

Null Hypothesis H0: Machine B is not performing better than machine A or The two machines are showing the same quality of performance.

Alternative Hypothesis Ha: Machine B is performing better than machine A or The two machines are showing different qualities of performance.

Level of Significance α = 0.05. The table that gives us the critical value is the t-table.

The formula to find the test statistic is as follows:

z = (p1 - p2) / √ (p1q1/n1 + p2q2/n2)

where p1 and p2 are the sample proportions of two samples, q1 and q2 are the respective complement of p1 and p2, n1 and n2 are the respective sample sizes.

Let's calculate the test statistic for the given data:

Sample size of machine A = n1 = 200

Number of defective screws in machine A = x1 = 19

Sample size of machine B = n2 = 100

Number of defective screws in machine B = x2 = 5

Hence, p1 = x1/n1 = 19/200 = 0.095 and p2 = x2/n2 = 5/100 = 0.05

q1 = 1 - p1 = 1 - 0.095 = 0.905 and q2 = 1 - p2 = 1 - 0.05 = 0.95

Substituting these values in the formula, we get:

z = (p1 - p2) / √ (p1q1/n1 + p2q2/n2)

z = (0.095 - 0.05) / √ (0.095×0.905/200 + 0.05×0.95/100)

z = 1.15

Now, let's find the critical value of z from the t-table using the level of significance α = 0.05.

The degree of freedom (df) is (n1 - 1) + (n2 - 1) = 198 + 99 = 297.

Using this degree of freedom and the level of significance α = 0.05, the critical value of z is z = ±1.96.

Since the test statistic z = 1.15 lies in the acceptance region (-1.96 to 1.96), we fail to reject the null hypothesis.

To learn more about statistics, refer below:

https://brainly.com/question/31538429

#SPJ11

The solution to the equation is approximately $94.65.

To solve the equation x(1.15)3 + $140 + x/1.152 = $420/1.152, we can follow these steps. First, we need to simplify the equation by applying the exponent and division operations.

1.15 raised to the power of 3 is 1.487875, so the equation becomes:

x * 1.487875 + $140 + x/1.152 = $420/1.152.

Next, let's eliminate the fraction by multiplying both sides of the equation by 1.152:

1.152 * x * 1.487875 + 1.152 * $140 + x = $420.

Simplifying further, we have:

1.73556x + $161.28 + x = $420.

Combining like terms, we get:

2.73556x + $161.28 = $420.

Now, let's isolate the variable x by subtracting $161.28 from both sides:

2.73556x = $420 - $161.28.

Simplifying the right side, we have:

2.73556x = $258.72.

Finally, divide both sides by 2.73556 to solve for x:

x = $258.72 / 2.73556.

Calculating this expression, we find that x ≈ $94.65 (rounded to the nearest cent).

Therefore, the solution to the equation is x ≈ $94.65.

Learn mjore ablout equation

brainly.com/question/29657983

#SPJ11

To find the power series representation and interval of convergence for the function 4x³ a(x) (1 - 2x), we'll start by considering each term separately.

The term 4x³ can be expressed as a power series representation using the geometric series formula:

4x³ = 4x³ (1 - (-x²))

= 4x³ (1 + (-x²) + (-x²)² + (-x²)³ + ...)

Now, let's consider the term a(x) (1 - 2x). Since a(x) is a function that is not specified in the question, we'll treat it as a constant term for now.

The power series representation for the function a(x) (1 - 2x) can be obtained by multiplying each term of 4x³ by a(x) (1 - 2x):

a(x) (1 - 2x) = 4x³ (1 + (-x²) + (-x²)² + (-x²)³ + ...) (a constant)

Combining these two power series representations, we get:

4x³ a(x) (1 - 2x) = 4x³ (1 + (-x²) + (-x²)² + (-x²)³ + ...) (a constant)

The interval of convergence for this power series representation can be determined by considering the convergence of each term. In this case, the interval of convergence will be determined by the convergence of the geometric series -x². The geometric series converges when the absolute value of the common ratio (-x²) is less than 1, i.e., |x²| < 1. Taking the square root of both sides, we have |x| < 1.

Therefore, the interval of convergence for the power series representation of 4x³ a(x) (1 - 2x) is -1 < x < 1.

To learn more about  power series visit:

brainly.com/question/32443084

#SPJ11

The conjecture is that any amount of postage that is 24 cents or more can be created using only 3 and 8 cent stamps.

Proof using strong induction:

So now we assume that the conjecture holds for all amounts of postage up to and including k, and we will show that it holds for k + 1 cents.

Let P(n) be the statement "any amount of postage that is n cents or more can be created using only 3 and 8 cent stamps."

We are assuming that P(24), P(25), P(26), and P(27) are all true.

We want to prove that P(k+1) is true for all k greater than or equal to 27.

Using the strong induction hypothesis, we know that P(k-3), P(k-2), P(k-1), and P(k) are all true.

Therefore, we can create k cents of postage using only 3 and 8 cent stamps.

We need to show that we can create k + 1 cents of postage as well.

We know that k-3, k-2, k-1, and k are all possible amounts of postage using only 3 and 8 cent stamps, so we can create k+1 cents of postage as follows:

if k-3 cents of postage can be created using only 3 and 8 cent stamps, then we can add an 8 cent stamp to make k-3+8=k+5 cents of postage;

if k-2 cents of postage can be created using only 3 and 8 cent stamps, then we can add a 3 cent stamp and an 8 cent stamp to make k-2+3+8=k+9 cents of postage;

if k-1 cents of postage can be created using only 3 and 8 cent stamps, then we can add two 3 cent stamps and an 8 cent stamp to make k-1+3+3+8=k+13 cents of postage;

if k cents of postage can be created using only 3 and 8 cent stamps, then we can add three 3 cent stamps and an 8 cent stamp to make k+3+3+3+8=k+17 cents of postage.

To know more about induction hypothesis, visit

https://brainly.com/question/31703254

#SPJ11

The answer is Iu(xj)e-ikxj==12N-1{if p=Nm,m=0,±1,±2,…otherwise}.

Given set of points or knots,2πj/N, for j = 0,...,N-1, N referred to as nodes or grid points or knots.

And the discrete Fourier coefficients of a complex-valued function u in (0,2π] with respect to these points areūk=k=−N/2,...,N/2−1.

N\begin{aligned} &\text{Given a set of points or knots,}\\ &\frac{2\pi j}{N},\text{ for }j = 0,...,N-1,\\ &\text{referred to as nodes or grid points or knots.}\\ &\text{And the discrete Fourier coefficients of a complex-valued function u in }(0,2\pi]\text{ with respect to these points are}\\ &\overline{u}_k=\frac{1}{N}\sum_{j=0}^{N-1}u(x_j)e^{-ikx_j}=k=\frac{-N}{2},...,\frac{N}{2}-1. \end{aligned}Nūk=1Nj=0N-1​u(xj)e−ikxj= k=−N/2,...,N/2−1.

The orthogonality relation is, Iu(xj)e-ikxj==12N-1{if p=Nm,m=0,±1,±2,…otherwise, Here is the step-by-step procedure to answer the above problem:

The discrete Fourier coefficients of a complex-valued function u in (0,2π] with respect to these points are:ūk=k=−N/2,...,N/2−1.

NThis can be represented as:ūk=1Nj=0N-1​u(xj)e-ikxj= k=−N/2,...,N/2−1.The orthogonality relation is:Iu(xj)e-ikxj==12N-1{if p=Nm,m=0,±1,±2,…otherwise,Therefore, the answer is Iu(xj)e-ikxj==12N-1{if p=Nm,m=0,±1,±2,…otherwise}.

Know more about nodes here:

https://brainly.com/question/20058133

#SPJ11

The region enclosed by the curves y = 9cos(x), y = (6sec(x))², and x = 4' 4 needs to be sketched and the area of the region needs to be found.



To sketch the region enclosed by the given curves, we first need to find the points of intersection between the curves. Setting the two equations for y equal to each other, we have:9cos(x) = (6sec(x))²

Simplifying this equation, we get:9cos(x) = 36sec²(x)

Dividing both sides by 36 and taking the square root, we have:

cos(x) = √(1/4)

cos(x) = ±1/2

This means that x can be either π/3 or 5π/3. Plugging these values back into the equations for y, we find the corresponding y-values:

y = 9cos(π/3) = 9(1/2) = 9/2

y = 9cos(5π/3) = 9(-1/2) = -9/2

Now we can sketch the region on the xy-plane. The region is bounded by the curves y = 9cos(x), y = (6sec(x))², and the vertical line x = 4' 4 (which indicates that the region extends infinitely in the positive x-direction). The region is symmetric about the x-axis due to the cosine function, and it is also bounded below by the x-axis. To find the area of this region, we need to integrate with respect to x. However, since the region is symmetric about the x-axis, we can calculate the area of the upper half and double it.

Therefore, the area of the region is:

2 ∫[π/3, 4' 4] 9cos(x) dx = 2 [9sin(x)] [π/3, 4' 4] = 18(sin(4' 4) - sin(π/3))

To learn more about curves click here

brainly.com/question/31114246

#SPJ11

The probability of Lester randomly selecting a sugar cookie, eating it, and then randomly selecting a chocolate chip cookie is 16/342.

What is the probability of selecting a sugar cookie followed by a chocolate chip cookie?

To find the probability of Lester randomly selecting a sugar cookie from the bag, eating it, and then randomly selecting a chocolate chip cookie, we need to consider the total number of cookies and the specific quantities of sugar and chocolate chip cookies. The bag contains a total of 6 + 7 + 8 + 6 = 27 cookies.

The probability of selecting a sugar cookie on the first draw is 8/27 because there are 8 sugar cookies out of the total 27. After Lester eats the sugar cookie, there are 26 cookies remaining in the bag, with 6 chocolate chip cookies. Therefore, the probability of randomly selecting a chocolate chip cookie on the second draw is 6/26.

To find the overall probability, we multiply the probabilities of the two events together: (8/27) * (6/26) = 48/702 = 8/117. Thus, the probability of Lester randomly selecting a sugar cookie from the bag, eating it, and then randomly selecting a chocolate chip cookie is 8/117, expressed as a reduced fraction.

Learn more about probability

brainly.com/question/31828911

#SPJ11

Evaluating f(¹5)(0) means substituting x = 0 into the expression for f(¹5)(x). Thus, f(¹5)(0) = -256 * sin(8 + 5π/2). The provided options do not match this expression, so none of the given options accurately represent f(¹5)(0).

To find f(¹5)(0) where f(x) = sin(2³), we need to differentiate f(x) with respect to x five times and evaluate the result at x = 0. The options provided are (a) 15!/3!, (b) 15!, (c) 10!, (d) 5!, and (e) 15!/5!.

Differentiating sin(2³) five times results in f(¹5)(x) = 2³ * (-2³)^5 * sin(2³ + 5π/2). Simplifying further, we get f(¹5)(x) = -256 * sin(8 + 5π/2).

Now, evaluating f(¹5)(0) means substituting x = 0 into the expression for f(¹5)(x). Thus, f(¹5)(0) = -256 * sin(8 + 5π/2).

The provided options do not match this expression, so none of the given options accurately represent f(¹5)(0).

Learn more about differentiation here: brainly.com/question/13142910
#SPJ11

The mass (kg) of the 2D plate is 5.91 kg, the Moment (kg.m) of the 2D plate about the y-axis is 124.6 kg.m, the a-coordinate (m) of the centre of mass of the 2D plate is 0.444 m and the x, y and z coordinate of the center of mass of the 3D volume is 0, 0 and 0.789 m (approx).

Given information:

The equation of line is y = 1.5x

The density of the 2D shape is uniform with the value of 3.5 kg/m².

The density of the 3D volume is uniform with the value of 2.9 kg/m³.

Formula used:The centre of mass formula is given byx = (1/M) ∫x dm & y = (1/M) ∫y dm

The Moment of Inertia formula is given byI = ∫(x²+y²)dm

a) Calculation of mass (kg) of the 2D plate

The density of the 2D shape is uniform with the value of 3.5 kg/m².The area of the shape bounded by the lines y = 1.5x between 0 to 1.5 is given by= 1/2 × base × height= 1/2 × 1.5 × 1.5= 1.6875 m²

Mass = density × area= 3.5 × 1.6875= 5.90625 kg= 5.91 kg (approx)

Therefore, the mass of the 2D plate is 5.91 kg.

b) Calculation of the Moment (kg.m) of the 2D plate about the y-axis

The distance between the y-axis and the centroid of the triangle is given byy_bar = h/3

where, h = height of the triangle= 1.5 m

Therefore, y_bar = 1.5/3= 0.5 m

Moment about y-axisI_y = ∫y²dm= ∫y²ρdA= ρ ∫y²dA

For the triangle, A = (1/2)bh= (1/2) × 1.5 × 1.5= 1.6875 m²ρ = 3.5 kg/m²dA = dx dy (because the triangle is in xy-plane)

The limits of the integral for x is 0 to 1.5. The limits of the integral for y is 0 to 1.5x.

I_y = ρ ∫₀^(1.5) ∫₀^(1.5x) y² dy dx= 3.5 ∫₀^(1.5) [y³/3]₀^(1.5x) dx= 3.5 ∫₀^(1.5) [ (1.5x)³/3 ] dx= 3.5 × (3/4) × (1.5)⁴= 21.094 kJ/kg

Moment of Inertia about y-axis= I_y × M= 21.094 × 5.90625= 124.576 kg.m= 124.6 kg.m (approx)

Therefore, the Moment (kg.m) of the 2D plate about the y-axis is 124.6 kg.m.

c) Calculation of a-coordinate (m) of the centre of mass of the 2D plate

The x-coordinate of the centroid is given byx_bar = (1/A) ∫x dAFor the triangle, A = 1.6875 m²

The limits of the integral for x is 0 to 1.5. The limits of the integral for y is 0 to 1.5x.

x_bar = (1/A) ∫₀^(1.5) ∫₀^(1.5x) x dy dx= (1/A) ∫₀^(1.5) [xy]₀^(1.5x) dx= (1/A) ∫₀^(1.5) [x(1.5x)] dx= (1/A) ∫₀^(1.5) [1.5x²] dx= (1/A) [0.75x³]₀^(1.5) = (1/A) (1.5)³/4= 0.75/1.6875= 0.444 m= 0.444 m (approx)

Therefore, the a-coordinate (m) of the centre of mass of the 2D plate is 0.444 m.

For the volume, the radius of the disk (r) = y

Therefore, the volume of the 3D figure= ∫πr² dh= ∫₀¹.⁵π y² dh= π ∫₀¹.⁵ (1.5x)² dx= π (1.5²) ∫₀¹.⁵ x⁴ dx= π (1.5²) [x⁵/5]₀¹.⁵= π (1.5²/5) × (1.5⁵)= 5.8594 m³

Therefore, the mass of the 3D figure= density × volume= 2.9 × 5.8594= 16.989 kg= 16.99 kg (approx)Therefore, the mass of the 3D figure is 16.99 kg. Now, find the x, y and z coordinate of the center of mass of the 3D volume.

The x-coordinate of the center of mass of the 3D volume is given by the formula:

x = (1/M) ∫x dV

where, M = mass of the 3D volume= 16.99 kg

The y-coordinate of the center of mass of the 3D volume is given by the formula:

y = (1/M) ∫y dV

The z-coordinate of the center of mass of the 3D volume is given by the formula:

z = (1/M) ∫z dV

Here, the body is symmetric about the z-axis and the center of mass will lie on the z-axis.

Therefore, the x, y and z coordinate of the center of mass of the 3D volume is given by

x = 0, y = 0 and z = (1/M) ∫z dV= (1/M) ∫zπr² dh= (1/M) ∫₀¹.⁵zπ (1.5x)² dx= (1/M) π (1.5²) ∫₀¹.⁵ z x⁴ dx= (1/M) π (1.5²) [z x⁵/5]₀¹.⁵= 0 (since it is symmetric about the z-axis)

Therefore, the x, y and z coordinate of the center of mass of the 3D volume is 0, 0 and 0.789 m (approx).

Thus, the mass (kg) of the 2D plate is 5.91 kg, the Moment (kg.m) of the 2D plate about the y-axis is 124.6 kg.m, the a-coordinate (m) of the centre of mass of the 2D plate is 0.444 m and the x, y and z coordinate of the center of mass of the 3D volume is 0, 0 and 0.789 m (approx).

To know more about Moment visit:

https://brainly.com/question/28687664

#SPJ11

The slope of the tangent line to the graph y = sech²(e) at x = 0 is 0.  Given function is y = sech²(e).Therefore, option (f) is the correct answer.

To find the slope of the tangent line to the given function at x=0, we need to take the first derivative of y using the chain rule of differentiation with respect to x:

y' = d/dx [sech²(e)] * d/dx[e].

We know that, d/dx [sech x] = -sech x * tanh x.

Thus, d/dx [sech²(e)] = -2 sech(e) * tanh(e).

Using chain rule, d/dx[e] = 1.

Therefore, y' = d/dx [sech²(e)] * d/dx[e]

=-2 sech(e) * tanh(e) * 1

= -2 sech(e) * tanh(e).

At x=0, we have to find the slope.

So we get, e = 0. Then, sech(0) = 1, tanh(0) = 0.

Thus, y' = -2 sech(0) * tanh(0)

= -2*1*0=0.

Therefore, the slope of the tangent line to the graph y = sech²(e) at x = 0 is 0. Therefore, option (f) is correct.

To know more about tangent line, refer

https://brainly.com/question/30162650

#SPJ11

a) FALSE

b) FALSE

c) FALSE

The statements about exponential smoothing, ARIMA model parameters, and simple ES models suitable for a linear trend are all false.

Exponential smoothing does not use a backward approach; it is a forward-looking method that updates the smoothed values based on past observations.

The results of the maximum likelihood method for determining ARIMA model parameters are not always better than the results of least square fitting. The choice between these methods depends on the specific characteristics of the data and the assumptions of the model.

Simple ES models can handle time series data with a linear trend. In fact, they are suitable for capturing trends in the data by incorporating trend components. However, for more complex trends or patterns, advanced time series models may be more appropriate.

Learn more about ARIMA

brainly.com/question/31969538

#SPJ11

The set of vectors in R³ that are linearly dependent are as follows:-a. (-2,0, 8), (-9, 4, 7), (8, -4, 5), (2, -9,0)- The main answer is that the given set of vectors is linearly dependent. Let's have a detailed explanation to understand the concept of linear dependence of vectors.

Detailed a set of vectors is linearly dependent if there exist non-zero scalars c1, c2, ... cn such that

c1v1 + c2v2 + ... + cnvn = 0 where vi is the ith vector.Let us check for the above set of vectors whether the given set of vectors are linearly dependent or not using a determinant.

determinant of A.If det(A) = 0, then the given vectors are linearly dependent. If det(A) ≠ 0, then the given vectors are linearly independent.Using row operations to reduce matrix A into an upper triangular form.

learn more about vectors

https://brainly.com/question/28028700

#SPJ11

A. the exponential rate of change, k, is approximately -0.74688.

B. the temperature of the water at 4:30 pm is approximately 66.14 degrees.

C. the cup of water will become frozen around 9:49 pm

A. We are given that after 1 hour, the temperature of the water is 80 degrees. We can use this information to find the exponential rate of change, k.

Using the formula T(x) = 10 + [tex]170e^{kx}[/tex], we substitute x = 1 and T(x) = 80:

80 = 10 + [tex]170e^{k*1[/tex]

Simplifying the equation:

70 = 170[tex]e^k[/tex]

Dividing both sides by 170:

[tex]e^k[/tex] = 70/170

Taking the natural logarithm (ln) of both sides:

ln([tex]e^k[/tex]) = ln(70/170)

k = ln(70/170)

Using a calculator, we can find the value of k rounded to 5 decimal places:

k ≈ -0.74688

Therefore, the exponential rate of change, k, is approximately -0.74688.

B. We need to find the temperature of the water at 4:30 pm, which is 1.5 hours after 3 pm. Using the formula T(x) = 10 + [tex]170e^{kx[/tex], we substitute x = 1.5:

T(1.5) = 10 + [tex]170e^{-0.74688*1.5[/tex]

Calculating the value using a calculator:

T(1.5) ≈ 10 + [tex]170e^{-1.12032[/tex]

T(1.5) ≈ 10 + 170(0.32594)

T(1.5) ≈ 10 + 56.14098

T(1.5) ≈ 66.14098

Therefore, the temperature of the water at 4:30 pm is approximately 66.14 degrees.

C. We need to find the time at which the cup of water becomes frozen, which occurs when the temperature reaches 32 degrees. Using the formula T(x) = 10 + [tex]170e^{kx[/tex], we set T(x) = 32 and solve for x:

32 = 10 + [tex]170e^{-0.74688x[/tex]

Subtracting 10 from both sides:

22 = [tex]170e^{-0.74688x[/tex]

Dividing both sides by 170:

[tex]e^{-0.74688x[/tex] = 22/170

Taking the natural logarithm (ln) of both sides:

[tex]ln(e^{-0.74688x})[/tex] = ln(22/170)

-0.74688x = ln(22/170)

Solving for x by dividing both sides by -0.74688:

x ≈ ln(22/170) / -0.74688

Using a calculator, we can find the value of x:

x ≈ 6.8201

Therefore, the cup of water will become frozen approximately 6.8201 hours after it is put in the freezer.

To convert this to the time of day, we add 6.8201 hours to 3 pm:

3 pm + 6.8201 hours = 9:49 pm

Therefore, the cup of water will become frozen around 9:49 pm (rounded to the nearest minute).

Learn more about temperature here

https://brainly.com/question/15635734

#SPJ4

D can never be singular as it is the product of three nonsingular matrices. D-1 = (CBA)-1 = A-1B-1C-1. If det(A) = −7, then det(A-1) = 1/det(A) = -1/7.

a. D can never be singular as it is the product of three nonsingular matrices. Let's suppose that D is singular. Thus, there exists a vector X ≠ 0 such that DX = 0. Hence, B(AX) = 0. As B is nonsingular, then AX = 0. But A is nonsingular too, which implies that X = 0, a contradiction. Thus, D is nonsingular. D-1 = (CBA)-1 = A-1B-1C-1

Explanation:It is given that matrices A, B and C are nonsingular and D = CBA. We are required to find if D can be singular or not and if not, what is D-1 and to prove/justify the conclusion when det(A) = −7. a) Here, D can never be singular as it is the product of three nonsingular matrices. If D were singular, then there would exist a non-zero vector X such that DX = 0.

Hence, B(AX) = 0. As B is nonsingular, then AX = 0. But A is nonsingular too, which implies that X = 0, a contradiction. Hence, D is nonsingular. D-1 = (CBA)-1 = A-1B-1C-1 b) Given, det(A) = −7

We know that determinant of a matrix is not zero if and only if it is invertible. A-1 exists as det(A) ≠ 0. Let A-1B-1C-1 be E. D-1 = A-1B-1C-1 = ELet D = CBA. We have, DE = CBAE = CI = I ED = EDC = ABC = D

The above equation shows that E is the inverse of D. Now, det(E) = det(A-1B-1C-1) = det(A-1)det(B-1)det(C-1) = (1/7)(1/det(B))(1/det(C))det(E) = (1/7)(1/det(B))(1/det(C))Let det(E) = k, then k = (1/7)(1/det(B))(1/det(C))

This implies that E exists and is non-singular. As E is the inverse of D, hence D is non-singular and hence invertible.

To know more about matrices visit:

brainly.com/question/30646566

#SPJ11