83) How much power does a sphere with a radius of 10 cm radiate into empty space if is has an emissivity of 1.0 and is kept at a temperature of 400 K? (σ = 5.67 × 10-8 W/m2 ∙ K4)
A) 60 W
B) 70 W
C) 180 W
D) 210 W
E) 360 W

The heat capacity of the metal is 0.23 J/g°C.

The heat lost by the metal is equal to the heat gained by the water. We can calculate the heat gained by the water using the formula Q = m * C * ΔT, where Q is the heat gained by the water, m is the mass of the water, C is the specific heat capacity of water, and ΔT is the change in temperature. We know the mass and temperature change of the water, and the specific heat capacity of water is a constant value of 4.184 J/g°C. Solving for Q, we get 1397.768 J. This is equal to the heat lost by the metal. Dividing this value by the mass of the metal and its temperature change, we get a heat capacity of 0.23 J/g°C for the metal.

Learn more about heat capacity here:

https://brainly.com/question/28302909

#SPJ11

To answer this question, we need to use some basic principles of rotational motion. Firstly, we know that the tangential acceleration of the tip of the prop is the rate of change of its tangential velocity.

Tangential velocity is given by the product of the radius and the angular velocity of the prop.

We are given that the prop starts from rest and accelerates uniformly to an angular speed of 55 rad/s in 3.0 seconds. Therefore, we can calculate the angular acceleration using the equation:

Angular acceleration (α) = (final angular velocity - initial angular velocity) / time

Substituting the values, we get:

α = (55 rad/s - 0 rad/s) / 3.0 s = 18.3 rad/s^2

Now, we can use the formula for tangential acceleration:

Tangential acceleration (at) = radius x angular acceleration

Substituting the values, we get:

at = 1.5 m x 18.3 rad/s^2 = 27.5 m/s^2

Therefore, the tangential acceleration of the tip of the prop is 27.5 m/s^2.

In summary, we have used basic principles of rotational motion to calculate the tangential acceleration of the tip of an airplane prop given its radius, initial and final angular velocities and the time taken for acceleration.

To know more about  rotational motionrefer here

https://brainly.com/question/12995374#

#SPJ11

The rate at which a resistor dissipates power is proportional to its resistance and the square of its temperature. The diameters of the two resistors are the same.  

Therefore, if resistor A has twice the power dissipation of resistor B, its resistance must be 1/2 the value of resistor B, and its temperature must be 2 times higher.

We can use Ohm's law to solve for the resistance of each resistor:

V = IR

P = IV

For resistor A, we know that its power dissipation is twice that of resistor B, so P_A = 2P_B. We can also assume that the current through both resistors is the same, since they are connected in series. Therefore, we can equate the two expressions for P:

2P_B = P_A

P_A = P_B/2

Expression for P_B and solving for R_A, we get:

R_A = R_B/2

Since the resistors are made from the same material and have the same length, they have the same resistance. Therefore, we can express the ratio of their resistances as a fraction with the same denominator, which simplifies to:

R_A/R_B = 1/2

We can express the ratio of their resistances in terms of significant figures as:

1/2 = 0.5

Since we want to express the ratio to three significant figures, we can truncate the decimal expansion of 0.5 to 0.500, which is the nearest whole number. Therefore, the diameters of the two resistors are:

R_A = R_B/2 = 0.500 R_B

= 2R_A = 2(0.500) = 1.000 R_A

= 1.000 R_B = 2R_A

= 2(0.500)

= 1.000

Therefore, the diameters of the two resistors are the same.  

Learn more about diameters Visit: brainly.com/question/28162977

#SPJ4

For the road test, an applicant must have a vehicle with a valid registration, a valid inspection sticker and a valid proof of insurance.

Proof of insurance is an important document that demonstrates that the vehicle being used for the test is covered by an insurance policy. This document confirms that the vehicle is insured against liability and damage. The insurance policy should be valid and in the name of the applicant or their parent or guardian. The applicant must present the proof of insurance to the examiner before the road test begins.

The insurance policy must also meet the minimum requirements of the state in which the test is being taken. It is important for the applicant to ensure that the vehicle they are using for the road test is in good working condition, registered, inspected, and insured, as failure to provide any of these documents may result in disqualification from the test.

To know more about insurance click here:

https://brainly.com/question/30439416

#SPJ11

The force of the impact equals 3000 pounds if you strike a stationary object while moving at 30 mph and weighing 100 pounds (mass times acceleration). This statement is false.

Weight is a measure of the force with which an object is pulled towards the center of the Earth due to gravity. It is proportional to an object's mass, but it also depends on the gravitational field strength at a particular location. In contrast, mass is a measure of the amount of matter in an object and is a fundamental property of an object that does not change with location.

The force of impact that results from a collision is determined by the object's mass and velocity. When an object is in motion, it possesses kinetic energy, which is given by the formula [tex]$KE = \frac{1}{2}mv^2$[/tex], where m is the mass of the object and v is its velocity. When the moving object collides with a stationary one, the kinetic energy is transferred to the stationary object, causing it to deform or break apart. The force of impact is the product of the time over which the collision occurs and the rate at which momentum is transferred, which is given by the formula F = Δp/Δt, where Δp is the change in momentum and Δt is the time interval over which it occurs.

Therefore, the force of impact in a collision depends on the mass, velocity, and time of collision, and cannot be determined solely from an object's weight. In the example given, the force of impact would depend on the mass of the object, its velocity at the time of the collision, and the time interval over which the collision occurred. It is not correct to assume that the force of impact would be 3000 pounds simply because the object weighs 100 pounds and is traveling at 30 mph.

To learn more about stationary objects

https://brainly.com/question/31115245

#SPJ4

The frequency of the ultrasound waves needed for a good detailed image is 1.5 MHz.

In the solution involving frequency, speed, and wavelength in the context of ultrasound. Ultrasound refers to sound waves with frequencies above the human range of hearing, which is about 20,000 Hz.

These high-frequency waves can penetrate the body and produce images by reflecting off internal structures.

In a typical ultrasound scan, the speed of the sound waves is 1500 m/s. To obtain a detailed image, the wavelength should be no more than 1.0 mm. To calculate the frequency of these ultrasound waves, you can use the formula:

Frequency (f) = Speed (v) / Wavelength (λ)Here, the speed (v) is 1500 m/s and the wavelength (λ) is 1.0 mm or 0.001 m.

Plugging these values into the formula: Frequency (f) = 1500 m/s / 0.001 m

Frequency (f) = 1,500,000 Hz or 1.5 MHzSo, the frequency of the ultrasound waves needed for a good detailed image is 1.5 MHz .

To know more about frequency Visit:

https://brainly.com/question/30611426

#SPJ11

The number of moles of gas (air) in the lungs of the average adult with a lung capacity of 3.8 L is 0.15moles.

Given:

Pressure, P = 1 atm

Temperature, T = 37°

Volume, V = 3.8 L

From the ideal gas equation:

PV = nRT

Here,

V = Volume

n = Number of moles

R = Ideal gas constant

T = Temperature in Kelvin

V = 3.8 L

Convert temperature into kelvin:

T(K) = T(°C) + 273.15

T = 37 °C + 273.15 = 310.15 K

The number of moles (n) is:

PV = nRT

n = (PV) / (RT)

n = (1.00 atm × 3.8 m³) / (8.314 J/(mol·K) × 310.15 K)

n = 0.15 mol

Hence, the number of moles of gas (air) in the lungs of the average adult with a lung capacity of 3.8 L is  0.15  moles.

To learn more about Moles, here:

https://brainly.com/question/15209553

#SPJ12

The mass defect in Fe-56 is 0.527 amu. To calculate the mass defect, we first need to find the total mass of the protons and neutrons in an Fe-56 nucleus. Using the given masses, we can calculate the total mass as follows:

(26 protons x 1.00728 amu/proton) + (30 neutrons x 1.008665 amu/neutron) = 55.93438 amu

However, the actual mass of an Fe-56 nucleus is given as 55.921 amu. This means that there is a difference between the actual mass and the calculated mass, which is known as the mass defect. We can calculate the mass defect by subtracting the actual mass from the calculated mass:

55.93438 amu - 55.921 amu = 0.01338 amu

However, we are asked to calculate the mass defect per nucleus, so we need to divide this by the number of nucleons (protons + neutrons) in the nucleus:

0.01338 amu / 56 nucleons = 0.0002389285 amu/nucleon

Finally, we can convert this to atomic mass units (amu) by multiplying by Avogadro's number:

0.0002389285 amu/nucleon x 6.022 x 10^23 nucleons/mol = 0.527 amu

In summary, the mass defect in Fe-56 is 0.527 amu, which represents the difference between the actual mass of an Fe-56 nucleus and the calculated mass based on the masses of its constituent particles. This value is important in nuclear physics, as it reflects the amount of energy that is released when a nucleus is formed or destroyed.

To learn more about mass defect visit:

brainly.com/question/11624098

#SPJ11

At STP (Standard Temperature and Pressure), one mole of any ideal gas occupies a volume of 22.4 liters.

At STP (Standard Temperature and Pressure), one mole of any ideal gas occupies a volume of 22.4 liters. So, we can use this information to find out the volume of 50 moles of Cl2 gas.
50 moles of Cl2 gas will occupy:
50 x 22.4 = 1120 liters of volume at STP
However, the question is asking for the volume of only 1.50 moles of Cl2 gas at STP. So, we need to calculate the volume of 1.50 moles of Cl2 gas using the molar volume of 22.4 liters/mole.
The volume of 1.50 mol Cl2 gas at STP is:
1.50 x 22.4 = 33.6 liters
Therefore, the volume in liters of 1.50 mol Cl2 gas at STP is 33.6 liters.

To know more about STP visit:

https://brainly.com/question/24050436

#SPJ11

We did not account for heat energy in the spring resonance model. However, it is important to consider heat energy as it affects the behavior and properties of the medium.

Heat energy is a form of energy that is present in every system, including the medium in the spring resonance model. Heat energy affects the properties and behavior of the medium, and therefore it is important to consider it when formulating the model.

For instance, heat energy can cause the medium to expand or contract, change its density, and affect its viscosity. These changes can affect the resonance frequency and damping behavior of the spring system, which can have significant consequences for its overall performance. In some cases, the heat energy may even be the dominant factor that determines the behavior of the system.

Therefore, it is essential to account for the heat energy in the medium when formulating the spring resonance model or any other system model to obtain an accurate representation of the system's behavior.

Learn more about heat energy here:

https://brainly.com/question/25384702

#SPJ11

The final charges on the spheres: Sphere x will have a positive charge and sphere y will have a negative charge.

When the negatively charged rubber rod is brought close to sphere x, the electrons in x are repelled and move away, leaving it with a positive charge. When sphere y is brought close to x on the opposite side of the rubber rod, it gets induced with a positive charge due to the presence of the positively charged x.

However, when y touches x, some electrons from x transfer to y, leaving x with a net positive charge and y with a net negative charge. When y is removed, it retains the negative charge. When the rubber rod is moved far away from x and y, there is no further effect on their charges, so x remains positive and y remains negative. Therefore, the final charges on the spheres are: x with a positive charge and y with a negative charge.

Learn more about charge here:

https://brainly.com/question/11944606

#SPJ11

The mass of a deuterium atom. In this case, the equation would be E = 1.007825 + 1.008665 - 2.014102, which equals 2 MeV.

Deuterium is an isotope of hydrogen. It consists of one proton and one neutron in its nucleus, making it an atom with twice the atomic mass of ordinary hydrogen. Deuterium is naturally abundant in the environment, and can be found in seawater, where it accounts for approximately 0.01% of all hydrogen atoms. It is also used in nuclear reactors as a fuel. Deuterium has unique properties compared to ordinary hydrogen, including higher boiling and melting points and different chemical properties. It has been used in research to study chemical reactions, and has potential applications in medicine, such as detecting cancerous cells. In addition, it is being explored as a potential fuel source for future space missions.

The binding energy of a deuterium atom is approximately 2 MeV. This can be calculated using the equation E = m(H) + m(n) - m(D), where m(H) is the mass of a hydrogen atom, m(n) is the mass of a neutron, and m(D) is the mass of a deuterium atom. In this case, the equation would be E = 1.007825 + 1.008665 - 2.014102, which equals 2 MeV.

To learn more about deuterium atom
https://brainly.com/question/15191638
#SPJ4

Answer:

There are several advantages to using nuclear energy to produce electricity.

Firstly, nuclear power plants do not emit greenhouse gases such as carbon dioxide, making them a low-carbon energy source. This is an advantage in the fight against climate change.

Secondly, nuclear power plants can generate a large amount of electricity using a relatively small amount of fuel, making them an efficient source of energy.

Thirdly, nuclear power plants can operate continuously for long periods of time without interruption, which improves energy reliability.

Finally, nuclear energy is not subject to price fluctuations in the same way that fossil fuels are, as uranium fuel prices are relatively stable.

However, nuclear energy also has several drawbacks, including the risk of accidents, the potential for nuclear proliferation, and the problem of radioactive waste disposal.

Explanation:

The responding variable in this experiment (B). The amount of salt added to the water is correct option.

The time it takes for the water to boil is the dependent variable. This variable depends on the salt content, making it a dependent variable.

The boiling point of the water is the variable that responds to the different amounts of salt added, and it is the variable that the scientist is measuring and analyzing.

The responding variable in this experiment is the boiling point of the water. The scientist is measuring how long it takes for the water to boil, which is dependent on the amount of salt added to each bottle.

Therefore, the correct option is (B).

The complete question is,

A scientist adds different amounts of salt to 5 bottles of water. She then measures how long it takes for the water to boil. What is the responding variable in this experiment? A. The time it takes for the water to boil, B. The amount of salt added to the water, C. The kind of bottles used, D. The brand of salt used

To know more about salt

https://brainly.com/question/377179

#SPJ1

Suppose the longitudinal component of a wave created by an earthquake is travelling from east to west. As it passes through your position, you would expect to move back and forth along the same east-west direction as the wave travels.

Longitudinal waves are waves in which the motion of the particles is parallel to the direction of wave propagation. In this case, as the wave moves from east to west,

the particles (including you) would oscillate in a to-and-fro motion along the same line.

To understand the movement better, follow these steps:

1. The earthquake generates a longitudinal wave that travels from east to west.

2. As the wave approaches your position, particles around you start to move in the same east-west direction.

3. When the wave reaches your position, you will experience a push or pull effect, causing you to move in the same

direction as the wave (either eastward or westward).

4. As the wave passes through, you will continue to oscillate back and forth along the east-west line, gradually returning to your original position as the energy from the wave dissipates.

In summary, when a longitudinal wave from an earthquake passes through your position, you can expect to move back and forth along the same east-west direction as the wave travels.

This motion will occur as the wave causes the particles in its path to oscillate in the direction of the wave propagation.

To know more aboutlongitudinal component refer here

https://brainly.com/question/13259705#

#SPJ11

It is not possible to calculate the torque acting on a rigid object without specifying an axis of rotation.

Torque is defined as the product of the force and the perpendicular distance from the axis of rotation to the point where the force is applied. Without knowing the axis of rotation, it is impossible to determine the perpendicular distance and thus the torque.

Thus, specifying the axis of rotation is crucial in calculating the torque acting on a rigid object.

To know more about torque, click here

https://brainly.com/question/29024338

#SPJ11

No, it is not possible to calculate the torque acting on a rigid object without specifying an axis of rotation.

What is Rotation?

Rotation is a physical motion in which an object or a system of objects spins or turns around an axis. It is a type of circular motion in which every point on the object or system follows a circular path around the axis of rotation.

Torque is defined as the cross product of the force and the lever arm, which is a vector quantity that is dependent on the axis of rotation. Therefore, without specifying the axis of rotation, torque cannot be calculated.

In summary, the axis of rotation is a crucial parameter for calculating torque, and its absence prevents the calculation of torque on a rigid object.

To learn more about Rotation, visit;

https://brainly.com/question/30337265

#SPJ4

The acorn will land 14.48 meters away from the base of the tree. To find the distance the acorn lands from the base of the tree, use the equations of motion for projectile motion.

We know that the vertical distance traveled by the acorn is 9.0 m and the initial vertical velocity is 18.1 sin 60 = 15.65 m/s. Using the equation d = vit + 1/2 at², we can find the time of flight, which turns out to be 1.6 seconds.

Next, we can find the horizontal distance traveled by the acorn using the equation d = vt, where v is the initial horizontal velocity, which is 18.1 cos 60 = 9.05 m/s. Therefore, the distance traveled by the acorn is 9.05 x 1.6 = 14.48 meters. Therefore, the acorn will land 14.48 meters away from the base of the tree.

Learn more about projectile motion here:

https://brainly.com/question/11049671

#SPJ11

An object that is electrically neutral contains equal amounts of positive and negative charges. Neutrons do not carry electrical charge: False.

Neutrons are subatomic particles which are found in the nucleus of an atom. They are neutral particles, meaning they do not have a positive or negative charge, and they have a mass slightly larger than that of a proton. Neutrons are an essential part of an atom, as they are what holds the protons together and keep them from repelling each other due to their positive charges. In addition, they also play a role in nuclear reactions such as nuclear fission and fusion. Neutrons are also important in other areas, such as medical imaging and nuclear energy production.

To learn more about Neutrons

https://brainly.com/question/30843028

#SPJ4

The answer to the question is that the velocity of a wave traveling down the string is 39 m/s.

We can use the formula for wave velocity on a string, which is v = √(T/μ), where T is the tension in the string and μ is the linear density (mass per unit length) of the string.

First, we need to calculate the tension in the string. We know the mass of the hanging weight (0.061 kg), and we can assume that the weight is in equilibrium (not moving up or down), so the tension in the string is equal to the weight of the hanging mass. Therefore, T = mg = 0.061 kg * 9.81 m/s^2 = 0.599 N.

Next, we need to calculate the linear density of the string. We are given that the string density is 0.00040 kg/m, so the linear density is simply that value (0.00040 kg/m).

Now we can plug these values into the formula for wave velocity: v = √(T/μ) = √(0.599 N / 0.00040 kg/m) = 39 m/s.

So, the velocity of a wave traveling down the string is 39 m/s, calculated using the formula for wave velocity on a string with the tension and linear density provided.

To learn more about velocity visit:

brainly.com/question/17127206

#SPJ11

Option B, which states that the magnitude of the truck's momentum is larger than the car's.

The total momentum of the system is conserved in the absence of external forces.

The spring, which was compressed initially, stores potential energy that is released as kinetic energy when the spring is released.

As the truck has more mass than the car, it will experience a smaller acceleration due to the same force from the spring.

Therefore, the car will move faster than the truck, but the truck will have a larger momentum due to its larger mass.

Summary: When a toy car and a toy truck at rest have a compressed spring in between them and the spring is released, the magnitude of the truck's momentum is larger than the car's, given that there is no friction.

Learn more about momentum click here:

https://brainly.com/question/1042017

#SPJ11

This does not seem like a promising method for launching satellites, as the final speed of the block would be too low to escape Earth's gravitational pull.

A satellite is an artificial object that has been intentionally placed into orbit. Satellites are used for a variety of purposes, including communications, navigation, earth observation, weather forecasting, and scientific research. They come in a variety of shapes and sizes, ranging from small cube satellites to large satellites with solar panels that can span up to 30 meters in diameter. Satellites are powered by a variety of energy sources, including solar, batteries, and nuclear power.

The acceleration of a 20-cm-diameter, 96.0 kg block can be calculated using the equation

[tex]a = P/(π*(d/2)^2*c*ρ)[/tex]

where P is the power of the laser beam (23.0 MW), d is the diameter of the block (20 cm), c is the speed of light[tex](3.0x10^8 m/s)[/tex], and ρ is the density of the block (assumed to be the same as that of water,[tex]1000 kg/m^3[/tex]). This gives a result of a =[tex]0.0098 m/s^2[/tex].

Using this acceleration, the final speed of the block after being pushed horizontally 100 m along a frictionless track by the laser beam can be calculated using the equation v = at, where t is the time taken for the block to travel 100 m. Since the acceleration is constant, the time taken for the block to travel 100 m is equal to t = 100 m/v, where v is the initial velocity of the block (assumed to be 0 m/s). Substituting this into the equation above gives a final speed of the block of v = 0.098 m/s.

This does not seem like a promising method for launching satellites, as the final speed of the block would be too low to escape Earth's gravitational pull.

To learn more about satellites

https://brainly.com/question/28106901

#SPJ4

The can will be charged with the same polarity as the rod. This is because electric charges move from areas of higher potential (the negatively charged rod) to areas of lower potential (the can).

Polarity is the way in which certain molecules or ions are arranged due to the direction of their electrical charge. A molecule's polarity is determined by the arrangement of its atoms and the electronegativity of the atoms within the molecule. Molecules with an equal distribution of charge are non-polar, while molecules that have a slightly positive charge on one end and a slightly negative charge on the other are polar.

When you touch the opposite side of the can, you provide a path for the charge to flow from the rod to the can, thus transferring the charge and causing the can to become charged with the same polarity as the rod.

To learn more about polarity

https://brainly.com/question/16979824

#SPJ4

A white dwarf star orbiting the center of the galaxy: While a white dwarf star orbiting the center of the galaxy could indicate the presence of a black hole, there is no direct evidence that suggests this is the case.

Galaxy is a term used to describe a large group of stars, dust, gas, and other objects in space held together by their mutual gravitational attraction. Galaxies are among the largest structures in the universe and can range in size from a few thousand light-years to hundreds of thousands of light-years across. There are several types of galaxies, including spiral, elliptical, and irregular, with each type having its own distinct properties.

Other evidence such as X-ray emissions, a large concentration of dust and gas, and a large gravitational pull from the center of the galaxy are all indicators that a black hole may exist at the center of the Milky Way.

To learn more about galaxy
https://brainly.com/question/1840671
#SPJ4

Complete Question:

Which of the following is not part of the growing chain of evidence that makes many astronomers suspect there is a black hole at the very center of the milky way galaxy?

A. X-ray emissions from the center of the galaxy.

B. A large concentration of dust and gas near the center of the galaxy.

C. A white dwarf star orbiting the center of the galaxy.

D. A large gravitational pull from the center of the galaxy.

Nuclear fusion in the Sun's core releases energy in the form of radiation, which travels through space and reaches Earth, providing light and heat essential for life.

Nuclear fusion occurs in the Sun's core, where extreme temperatures and pressures cause hydrogen atoms to combine and form helium. This process releases a significant amount of energy in the form of light and heat.

The energy released during nuclear fusion travels outward from the Sun's core through various layers, such as the radiative zone and the convective zone.

Upon reaching the Sun's surface, the energy is emitted as electromagnetic radiation, which includes visible light, ultraviolet light, and other forms of radiation.

This radiation travels through space, eventually reaching the Earth's atmosphere.

Some of this radiation is absorbed by Earth's atmosphere, while the rest reaches the surface, providing the heat and light necessary for life to exist.

In summary, nuclear fusion in the Sun's core releases energy in the form of radiation, which travels through space and reaches Earth, providing light and heat essential for life.

Learn more about Nuclear fusion

brainly.com/question/12701636

#SPJ11

The correct option is (c) (I), (II) and (III). 0° polarization is the same as 180° polarization, 120° polarization is the same as -60° polarization, and 45° polarization is the same as – 45° polarization.

Polarization is a phenomenon in which certain physical and/or electromagnetic properties of a system become restricted to only one direction or orientation. It is a result of the interaction of waves of the same frequency, and is often observed in light, sound, and radio waves. Polarization is an important factor in many optical and communication systems, as it can be used to filter out unwanted signals and improve the efficiency of transmission. Polarization can also be relevant to the fields of electromagnetism, acoustics, and seismology.

Therefore, the correct option is C.
To learn more about polarization
https://brainly.com/question/29217577
#SPJ4

The resultant vector is [tex]-2.00 \times 10^2[/tex] units due west and [tex]4.00 \times 10^2[/tex] units 30.0 degrees north of east.

A vector is a mathematical object that is used to represent a quantity with both magnitude and direction. Vectors are typically denoted by a set of ordered numbers known as components. These components represent the magnitude and direction of the vector in a given coordinate system, such as the Cartesian coordinate system. Vectors can be used to represent physical phenomena, such as velocity, force, and acceleration, and can be used to model the behavior of complex systems.

The x-component of the first vector is [tex]2.00 \times 10^2[/tex] units due east, which is simply [tex]2.00 \times 10^2[/tex] units.
The y-component of the first vector is 0 units.
The x-component of the second vector is [tex]4.00 \times 10^2[/tex] units north of west, which is [tex]-4.00 \times 10^2[/tex] units.
The y-component of the second vector is [tex]4.00 \times 10^2[/tex] units, which is 30.0 degrees north of east.
Adding the x-components together we get: [tex]2.00 \times 10^2 - 4.00 \times 10^2 = -2.00 \times 10^2[/tex]
Adding the y-components together we get: [tex]0 + 4.00 \times 10^2 = 4.00 \times 10^2[/tex]
Therefore, the resultant vector is [tex]-2.00 \times 10^2[/tex] units due west and [tex]4.00 \times 10^2[/tex] units 30.0 degrees north of east.

To learn more about vector
https://brainly.com/question/27854247
#SPJ4

The average force exerted by the bat on the baseball is 3262.5 N.

We can use the impulse-momentum theorem to solve this problem. The impulse-momentum theorem states that the impulse applied to an object is equal to the change in its momentum:

Impulse = Change in momentum

In this case, the bat applies an impulse to the baseball, which causes it to change its velocity from 0 m/s to 45 m/s. The momentum of the baseball before the collision is zero, so the change in momentum is:

Δp = mΔv = (0.145 kg)(45 m/s) = 6.525 kg m/s

The duration of the collision is 2 ms, or 0.002 s. The average force exerted by the bat is equal to the impulse divided by the duration of the collision:

F = Δp/Δt = 6.525 kg m/s / 0.002 s = 3262.5 N

Therefore, the average force exerted by the bat on the baseball is 3262.5 N.

Learn more about “average force  “ visit here;

https://brainly.com/question/29781083

#SPJ4

it would not be reasonable to use this second-degree Taylor polynomial to estimate the distance traveled during the next minute, as the polynomial is only a good approximation for small time intervals

We can use the second-degree Taylor polynomial to estimate the distance traveled by the car in the next second:

The position function of the car can be approximated as:

s(t) ≈ s(0) + v(0) t + (1/2) a t^2

where s(t) is the position of the car at time t, v(0) is the initial velocity of the car, a is the acceleration of the car, and s(0) is the initial position of the car.

At the given instant, the velocity of the car is v(0) = 80 m/s, and the acceleration is a = 6 m/s^2. Therefore, we can estimate the position of the car after 1 second as:

s(1) ≈ s(0) + v(0) t + (1/2) a t^2

s(1) ≈ s(0) + 80(1) + (1/2)(6)(1)^2

s(1) ≈ s(0) + 83 meters

So, we can estimate that the car moves about 83 meters in the next second.

To learn more about distance visit:

brainly.com/question/13034462

#SPJ11

Both bullets will hit the ground at the same time if we neglect air resistance.

This is because, according to the laws of motion, the acceleration due to gravity is the same for both objects, regardless of their masses. Therefore,

However, in reality, air resistance will affect the trajectory of the bullet that is shot from the gun, causing it to slow down faster than the bullet that is simply dropped. This means that, in practice, the bullet that is dropped will hit the ground first.

Learn more about “ neglect air resistance. “ visit here;

https://brainly.com/question/14898646

#SPJ4

The time required to stop a 200 kilogram wagon moving at 5 m/sec with a 40 newton force is: 40 N force.

Newton (also known as Isaac Newton) was an English scientist and mathematician from the 17th and 18th centuries. He is widely recognized as one of the most influential scientists of all time. He made revolutionary contributions to mathematics, optics, and physics.

The time required to stop the wagon can be calculated using the equation for force, which states that force equals mass times acceleration.

F = m × a

Rearranging the equation to solve for acceleration yields: a = F/m

Substituting in the given values: a = 40 N / 200 kg = 0.2 m/s²

To calculate the time required to stop the wagon, we can use the equation for velocity, which states that velocity equals acceleration times time.

v = a × t

Rearranging the equation to solve for time yields: t = v/a

Substituting in the given values: t = 5 m/s / 0.2 m/s² = 25 s

Therefore, it will take 25 seconds for the wagon to stop with a 40 N force.

To learn more about newton

https://brainly.com/question/25545050

#SPJ4