Answer:
I = 138.75N*s
Explanation:
I = F*t
I = Impulse or momentum
t = Time or duration
F = Force
I = 18,500N*0.0075s
I = 138.75N*s
please help pleaseeeeee
Answer:
25mg
Explanation:
it basically explains itself
Can Hotspots can be found at the edges of tectonic plates?
Answer:
No.
Explanation:
Hot spots don't appear at the barriers of tectonic plates, instead, they originate at hot centres known as mantle plumes. Mantle plumes exist below the tectonic plates and may develop a string of volcanoes on the Earths surface.
During a ______ Moon phase, the side of the Moon facing Earth isn't reflecting any sunlight from the Sun.
A: Full
B: New
Answer:
B) New
During a new Moon phase, the side of the Moon facing Earth isn't reflecting any sunlight from the Sun.
What symbols are these?
Answer:
the bottom one is wollsiegel
Help plz????????? Giving out Brainly
Answer:
Answer should be (B)
Explanation:
If the forces on an object are balanced (or if there are no forces acting on it), this is what happens: a stationary object stays still. a moving object continues to move at the same speed and in the same direction.
ALSO: forces acting upon an object are balanced, then the object will maintain its state of motion. To maintain the state of motion is to keep the current speed and direction. But if the forces are not balanced, the object will change its state of motion.
What would be the extension of the spring for a 3 N weight if the extension of the spring was 4 mm for a 50 g mass?
А 4 mm B)8 mm C)12mm D)24 mm
Answer:
24mm
Explanation:
3 N to g is 305.9 g
50g ---- 4 mm
305.9 ----- 4×305.9/50 = 24 mm
a uniform metre rule of mass 100g balances at the 40cm mark when a mass X is placed at the 10cm mark what is the value of x.pls help I don't know how to solve it
Answer:
The fulcrum of the metre stick is at the 40 cm mark
100 g * 10 cm = 1000 g-cm clockwise torque
x * 30 cm = 1000 gm-cm = counterclockwise torque for balance
X = 1000 / (40 -10) = 1000 / 30 = 33.3 gm at 10 cm to balance
A boy pushes a stationary box of mass 20 kg with a force of 50 N.
Calculate the acceleration of the box. (Assume that there is no friction.)
Answer:
2.5m/s^2
Explanation:
Since there is no friction, the only force acting on the box is the applied force
We can now use the equation Fnet = ma
and we can rearrange for a
a = Fnet/m
now input the values
a = 50N/20kg
a = 2.5 m/s^2
If 40 N force is exerted by a box covering 2 metre square area, calculate pressure.
[tex]\\ \sf\longmapsto Pressure=\dfrac{Force}{Area}[/tex]
[tex]\\ \sf\longmapsto Pressure=\dfrac{40}{2}[/tex]
[tex]\\ \sf\longmapsto Pressure=20Pa[/tex]
[tex] \sf \huge \red {\dag} Given[/tex]
[tex]\sf \longmapsto \: Force \: = 40 \: Newtons[/tex]
[tex]\sf \longmapsto \: Area \: = \: 2m \: Square \: ( {2m}^{2} )[/tex]
We know that the formula of Pressure is
[tex]\sf \longmapsto \: Force/Area[/tex]
Let's start.
Put the values[tex]\sf \longmapsto \: \: P = 40 \: newtons(force)/2(Area)[/tex]
[tex]\sf \longmapsto Pressure \: 20 \: N/m^2[/tex]
[tex]\boxed{\sf\red{\boxed{ \sf Pressure ≈ \: 20 \: N/m^2}}}[/tex]
A girl pushes her little brother on his sled with a force of 300 N for 750 m.
Please find attached photograph for your answer.
Hope it helps.
Do comment if you have any query.
Which colour of light is refracted more by a prsim green or blue.explain
Answer:
The light waves are refracted as they enter and leave the prism. The shorter the wavelength of the light, the more it is refracted. As a result, red light is refracted the least and violet light is refracted the most - causing the coloured light to spread out to form a spectrum.
Explanation:
hope this helps
Answer: Neither, its actually violet aka purple. This is because it has the shortest wavelength. This is also why red light is refracted the least because it has the longest wavelength.
Would appreciate brainly <3
When waves are closer together, the distance between them is _________, therefore the waves have __________ wavelength.
Answer:
less' shorter
Explanation:
be cuase science
Answer:
The answer is D.
Explanation:
When waves are closer together, the distance between them is less, therefore the waves have longer wavelength.
Of the Three elements listed, which element is NOT present in the mixture?
Element D
Element A
Element Z
Answer:
element ammmkkkv was a very good
ECONOMIC Q‼️
Which of these is a common concern of an economist ?
A-The distributions of populations and earths resources
B-How people have organized the rules and laws of their societies
C-The cultural habits and social customs of societies
D-How well resources are used by a society
Answer:
D-How well resources are used by a society
Explanation:
Most economists are concerned with practical applications of economic policy in a particular area, such as finance, labor, agriculture, transportation...
Hope this helps luvv :)
What happens when you want to move the boat forward? You pull the oars toward yourself.Explain why you do this.
Answer:
You pull on the oars. By the third law, the oars push back on your hands, but that’s irrelevant to the motion of the boat. The other end of each oar (the blade) pushes against the water. By the third law, the water pushes back on the oars, pushing the boat forward.
What is the orbital period of a spacecraft in a low orbit near the surface of mars? the radius of mars is 3. 4×106m.
Answer:
if not sure sorry hope someone helps u❤️
Why are people so rude???
Answer:
It could be low self-esteem
Explanation:
There probably insecure have problems and issues of their own could be that were abused growing up and weren’t treated right who knows.
A champion weight lifter raises a 240 kg barbell a distance of 2.1 m. How much potential energy has
the barbell gained?
Answer:
Your answer is below …….
Explanation:
25. Brutus, a champion weightlifter, raises
240 kg of weights a distance of 2.35 m.
a. How much work is done by Brutus
lifting the weights?
W=Fd=mgd
= (240 kg)(9.80 m/s2)(2.35 m)
= 5.5 x 103j
b. How much work is done by Brutus
holding the weights above his head?
d=0, so no work
c. How much work is done by Brutus
lowering them back to the ground?
d is opposite of motion in part a, so
W is also the opposite, -5.5 x 103 J.
d. Does Brutus do work if he lets go of
the weights and they fall back to the
ground?
No. He exerts no force, so he does
no work, positive or negative.
If Brutus completes the lift in 2.5 s.
how much power is developed?
* = multiply
[tex]P = \frac{W}{t} = \frac{5.53 * 10x^{3} J}{2.5s} = 2.2 kW[/tex]
_____________________________________
(Hope this helps can I pls have brainlist (crown)☺️)
calculate the density, in g/l, of sf6 gas at 27°c and 0.500 atm pressure.
The density of the SF₆ gas at the given pressure and temperature is 2.96 g/l.
The given parameters:
temperature of the SF₆ gas, T = 27 ⁰C = 273 + 27 = 300 Kpressure of the SF₆ gas, P = 0.5 atmThe molecular mass of the SF₆ gas is calculated as follows;
M of SF₆ = 32 + (6 x 19) = 146 g/mol
The density of the SF₆ gas is calculated by applying ideal gas law as follows;
[tex]PV = nRT\\\\PV = \frac{m}{M} RT\\\\PM = \frac{m}{V} RT\\\\PM = \rho RT\\\\\rho = \frac{PM}{RT}[/tex]
where;
[tex]\rho[/tex] is the density of the gasR is the ideal gas constant = 0.0821 L.atm/mol.K[tex]\rho = \frac{0.5 \times 146}{0.0821 \times 300} \\\\\rho = 2.96 \ g/l[/tex]
Thus, the density of the SF₆ gas at the given pressure and temperature is 2.96 g/l.
Learn more here:https://brainly.com/question/21912477
The c-c sigma bond in acetylene is formed by the overlap of which two orbitals.
Answer:When carbon atom tends to form single bonds then its hybridization is , when carbon atom tends to form double bond then its hybridization is and when a carbon atom is attached to a triple bond or with two double bonds then its hydridization is sp.
For example, in HCN molecule there is a triple existing between the carbon and nitrogen atom.
So, hybridization of carbon in this molecules is sp. Moreover, nitrogen atom is also attached via triple bond and it also has a lone pair of electrons. Hence, the hybridization of nitrogen atom is also sp.
Thus, we can conclude that s and p type of orbitals overlap to form the sigma bond between C and N in H−C≡N:
Explanation:
How much would a 70 kg student weigh on Pluto? (massPluto = 1.25 x 1022 kg, radiusPluto = 1.20 x 106 m)
Answer: the weight would be 4.6 (I think i don’t know))
Explanation:
A 5.77 kg object is tied to the end of a cord and whirled in a horizontal circle of radius 355 cm. The object completes 4.4 revolutions every 6.94E-3 hours. What is the centripetal force exerted on the object?
The centripetal force exerted on the object is 25.24 N.
The given parameters:
mass of the object, m = 5.77 kgradius of the circle, r = 355 cm = 3.55 mnumber of revolutions, N = 4.4 rev for 6.9 x 10⁻³ hoursThe angular speed of the object is calculated as follows;
[tex]\omega = \frac{4.4 \ rev}{6.9 \times 10^{-3} \ h} \times \frac{1 \ h}{3600 \ s} \times \frac{2 \ \pi \ rad}{1 \ rev} = 1.11 \ rad/s[/tex]
The centripetal force exerted on the object is calculated as follows;
[tex]F =m \omega ^2 r\\\\F = 5.77 \times (1.11)^2 \times 3.55\\\\F = 25.24 \ N[/tex]
Thus, the centripetal force exerted on the object is 25.24 N.
Learn more about centripetal force here: https://brainly.com/question/20905151
density differences in different materials are able to change the _____________ of a wave.
Answer:
Wavelength and speed both depend on the material of the medium.
Explanation:
Let [tex]f[/tex] denote the frequency of a wave. Let [tex]v[/tex] denote the speed of that wave in a given medium. Let [tex]\lambda[/tex] denote the wavelength of that wave in this medium.
The frequency [tex]f[/tex] of a wave stays the same regardless of the material of the media. However, the speed [tex]v[/tex] of a wave indeed depends on the material of the medium (density of the medium, etc.)
[tex]\lambda = v / f[/tex] and [tex]f[/tex] stays the same regardless of the medium. Thus, the wavelength [tex]\lambda[/tex] of this wave in a given medium would be proportional to the speed [tex]v[/tex] in that medium.
For example, the speed of sound in materials with a larger density (e.g., water) is generally larger than that in materials with lower density (e.g., air.)
When a sound wave travels from air into water, the frequency [tex]f[/tex] of this wave would stay the same. However, since the speed [tex]v[/tex] of the wave would increase, the wavelength [tex]\lambda[/tex] of this wave would also increase.
A car starts from rest, then accelerates at 1.20 m/s2 for 7.00 s. It hits the brakes,
slowing to a stop at a rate of -4.25 m/s2.
What is the total distance travelled?
Answer:
the answer is 4.15 m/s2
Explanation:
4.15 m/s2
Which state of matter has molecules that move the most?
liquid
solid
gas
They are all the same.
Answer:
gas
Explanation:
in gaseous state molecules move the most because force of attraction between atoms are least in gaseous state
A space ship, initially traveling at a speed of 1,265 m/s, begins to accelerate at a rate of 16
m/s/s. Find the speed of the space ship after it accelerates for 41 s ?
Answer:
I Think the answer is 1380
Explanation:
Answer: press the link
Explanation:
Please help :[ Hold a flat piece of paper horizontally. Lift it high in front of you, and drop it. Then crumple a piece of paper into a tight ball, hold it high in front of you, and drop it from the same height. Compare the motion of the two pieces of paper.
The one you lifted in front of you ( the flat piece of paper being holded horizontally ) goes down so slow. While the one being crumpled into a ball goes down fast. Subscribe to DreamfanBG for support.
Answer:
Answer below
Explanation:
The flat piece of paper just gently glided to the ground, as if it were a feather. It didn’t go down in a straight line, it swayed from side to side. The crumpled piece of paper seemed like it had more weight to it (although I know that it didn’t), and it fell way quicker than the flat piece of paper.
_____________________________________________________
(Hope this helps can I pls have brainlist (crown)☺️)
Se lanza un balón verticalmente hacia arriba con una velocidad de 72 km/h. ¿Qué altura recorrió dicho cuerpo después de 0.05 minutos? (g = 10m/s2)
Usando la información contenida en la pregunta, la distancia que recorre la bola hacia arriba es de 15 m.
Velocidad inicial = 20 m / s
Tiempo= 3 s
Aceleración por gravedad = 10 ms-2
Velocidad final = 0 m / s
Usando la ecuación;
h = u t - 1 / 2 g t 2
h = (20 × 3) - 1/2 × 10 × (3) ^ 2
h = 60 - 45
h = 15 m
Más información: https://brainly.com/question/6284546
Help me quickly! please!!!
A cable pulls a car up a mountain with a force of 4 × 103 N at a vertical constant velocity of 5 m.s-1. It takes 5 minutes to reach the top.
(a)How much work is done in getting the car to the top?
(b)How much work would have been done if the vertical speed was 2,5 m.s-1?
(c)Calculate the power exerted on the cable car in those 5 minutes.
Answer:
(a) 6,000,000J
(b) 3,000,000J
(c) For A 20,000W
But for B 10,000W
The work done in getting the car to the top is equal to 6 ×10⁶ J. If the vertical speed is 2.5 m/s then, the work done will be 3 ×10⁶ J. The power exerted on the car is in 5 minutes is 20000 J/s.
What is work done ?In physics, work done is the dot product of force and displacement. Let w be the work done and F and ds be the force and displacement. Then
W = F.ds
It is given that the, the force of the cable is 4 × 10³ N. The velocity is 5 m/s and time is 5 minutes or 300 seconds. Now, the displacement is the product of time and velocity.
ds = velocity × time
= 300 s × 5 m/s
= 1500 m.
Thus the work done = F × ds
= 4 × 10³ N × 1500 m
= 6 ×10⁶ J .
If the velocity is reduced to half 2.5 m/s , then work done will be reduced to half as 3 ×10⁶ J.
Power is the rate of work done. Thus it is the ratio of work done to time. The power exerted on the car in 5 minutes = 6 ×10⁶ J /300s
= 20000 J/s
Hence, the power exerted on the cable car in 5 minutes is 20000 J/s.
To find more on work done, refer here:
https://brainly.com/question/3902440
#SPJ3
I will give 100 Points, 5-stars, and Brainliest
Direct contact is necessary for which type of energy transfer?
A. Conduction
B. Sound Waves
C. Conduction
D. Convection
Answer:
Conduction
Explanation:
Because when a molecule is transferred to another molecule then this in going into direct contact
For example if we have a pan and it is boiling well the heat that is on the pan holder that stays in place and it won`t move anywhere else like there is Radiation and Convection but for this question the answer would be Conduction
