a 0.856 g sample of magnesium chloride dissolves in 87.7 g of water in a flask. assuming the solution is ideal, what is the freezing point (at 1 atm)? enter to 3 decimal places.

The pH of the solution after the addition of 400.0 mL HBr is 1.40.

What is Solution?

A solution is a homogeneous mixture of two or more substances, where the particles of the substances are evenly distributed at the molecular or ionic level. In a solution, the substance that is present in the greatest amount is called the solvent, and the substances that are present in smaller amounts are called solutes.

Number of moles of Ca(OH)2 = M x V = 0.10 mol/L x 0.100 L = 0.010 mol

Therefore, the number of moles of HBr required to reach the equivalence point = 2 x 0.010 mol = 0.020 mol

Now, let's consider the addition of 400.0 mL of 0.10 M HBr to the Ca(OH)2 solution.

The number of moles of HBr added = M x V = 0.10 mol/L x 0.400 L = 0.040 mol

As this amount of HBr is greater than the amount required to reach the equivalence point, the excess amount of HBr is:

0.040 mol - 0.020 mol = 0.020 mol

Now, we need to find the concentration of H+ ions in the solution after the addition of excess HBr. The excess HBr will dissociate completely to give H+ and Br- ions.

The moles of H+ ions produced = 0.020 mol

The total volume of the solution after the addition of excess HBr = 0.100 L + 0.400 L = 0.500 L

Therefore, the concentration of H+ ions in the solution = moles of H+ ions / volume of the solution = 0.020 mol / 0.500 L = 0.040 M

pH = -log[H+] = -log(0.040) = 1.40

Therefore, the pH of the solution after the addition of 400.0 mL HBr is 1.40.

Learn more about Solution from the given link

https://brainly.com/question/25326161

#SPJ4

As the principal quantum number (n) increases in a hydrogen atom, the distance between adjacent orbit radii increases.

In other words, the distance between the nucleus and the outermost electron shell increases with increasing n. This is due to the fact that higher energy levels are farther away from the nucleus, which means that electrons in those energy levels are on average further away from the nucleus.

This can also be seen by the fact that the radius of the electron orbit in the Bohr model is proportional to n². So, as n increases, the distance between adjacent orbit radii increases as well.

To know more about principal quantum number here

https://brainly.com/question/16725426

#SPJ4

The electron group geometry of the molecule shown is tetrahedral and the electron pair geometry is trigonal planar.

Trigonal is a three-dimensional shape or form with three planes of symmetry. It is a type of symmetry that can be seen in a variety of shapes and structures, including crystals, molecules, and even certain organisms. Trigonal shapes can be divided into two categories: trigonal planar, which has three sides that are all equal in length, and trigonal pyramidal, which has three sides that are not equal in length. Trigonal structures are often found in minerals, and are used to classify and identify them. They are also used to understand the structure and behavior of molecules, as well as the behavior of certain living organisms.

To learn more about trigonal

https://brainly.com/question/22697472

#SPJ4

To find Kb for the formic ion (HCOO-). The correct answer is c. 5.6 x 10^-11.

To find Kb for the formic ion (HCOO-), we can use the relationship between Ka and Kb:

Ka x Kb = Kw

where Kw is the ion product constant for water (1.0 x 10^-14 at 25°C).

Since we know Ka for formic acid is 1.8 x 10^-4, we can rearrange the equation to solve for Kb:

Kb = Kw / Ka

Plugging in the values, we get:

Kb = (1.0 x 10^-14) / (1.8 x 10^-4)

Kb = 5.6 x 10^-11

Therefore, the correct option is c. 5.6 x 10^-11.

To know more about formic ion click here:

https://brainly.com/question/28169167

#SPJ11

When reducing camphor, the reducing agent can either approach the carbonyl face with a one-carbon bridge (referred to as an exo attack) or a two-carbon bridge (referred to as an endo attack).

What does camphor reduction accomplish?

Extra borohydride is typically used since it might be challenging to evaluate a material's purity. According to theory, the interaction between the borohydride and the two faces of the C=O bond during camphor reduction can lead to the creation of two diastereomeric alcohols.

Pulverization by intervention is the process of making a substance powder with the help of another substance that can be quickly removed after the process is complete. This method can be used to powder sticky, prone to re-agglomeration, or challenging to grind materials like camphor.

To learn more about pulverization use:

https://brainly.com/question/947373

#SPJ4

The strength of van der Waals forces generally increases going down a group in the periodic table, due to increasing molecular size and polarization.

Van der Waals forces are a type of weak intermolecular forces that arise between molecules. These forces can be divided into three categories: London dispersion forces, dipole-dipole interactions, and hydrogen bonding.

Going down a group in the periodic table, the size of the atoms or molecules generally increases. As a result, the strength of London dispersion forces, which are the dominant type of van der Waals forces between nonpolar molecules, increases with increasing atomic or molecular size. This is because larger atoms or molecules have more electrons, which leads to a larger electron cloud and a greater polarization, resulting in stronger London dispersion forces.

Additionally, the dipole moment of polar molecules tends to increase with size as well, due to the greater separation of charge. Therefore, dipole-dipole interactions may also increase slightly going down a group.

Learn more about van der Waals forces here,

https://brainly.com/question/18370866

#SPJ4

The number of atoms of lithium required to equalize the mass of one atom of krypton is 12.056 atoms

First, we shall determine the mass of 1 atom of krypton. Details below:

From Avogadro's hypothesis,

6.02×10²³ atoms = 1 mole of Kr

But

1 mole of Kr = 83.798 g

Thus, we can say that

6.02×10²³ atoms = 83.798 g of Kr

Therefore,

1 atom = 83.798 / 6.02×10²³

1 atom = 1.39×10⁻²² g of Kr

Finally, we shall determine the number of atoms of lithium equivalent to 1 atom of Krypton (i.e 1.39×10⁻²² g). Details below:

From Avogadro's hypothesis,

1 mole of Li = 6.02×10²³ atoms

But,

1 mole of Li = 6.941 g

Thus,

6.941 g of Li = 6.02×10²³ atoms

Therefore,

1.39×10⁻²² g of Li = (1.39×10⁻²² g × 6.02×10²³ atoms) / 6.941 g

1.39×10⁻²² g of Li = 12.056 atoms

Thus, from the above calculation, the number of atoms of lithium is 12.056 atoms

Learn more about number of atoms:

brainly.com/question/15488332

#SPJ1

We can plug them into the Henderson-Hasselbalch equation to calculate the pH 2.14

Ascorbic acid, also known as Vitamin C, is a naturally occurring water-soluble vitamin found in citrus fruits, green vegetables, and other fruits and vegetables. It is an essential nutrient for humans, playing an important role in the growth and repair of tissues, and helping to protect the body from free radicals and other environmental toxins.

Ka1 for H₂C₆H₆O₆ = 7.5 x 10⁻⁵
The initial concentration of H₂C₆H₆O₆ is 0.0942M.
We can calculate the pH of the solution by using the Henderson-Hasselbalch equation:
pH = pKa1 + log ([C₆H₆O₆²⁻] / [H₂C₆H₆O₆)
Since we don't know the concentrations of H₂C₆H₆O₆ and C₆H₆O₆²⁻, we can use the law of mass action to solve for them.
At equilibrium,
[H₂C₆H₆O₆] * [C₆H₆O₆²⁻] = Ka1 * [H₂C₆H₆O₆]²
[C₆H₆O₆²⁻] = Ka1 * [H₂C₆H₆O₆]
Substituting the initial concentration of H₂C₆H₆O₆:
[C₆H₆O₆²⁻] = (7.5 x 10⁻⁵) * (0.0942) = 7.08 x 10⁻⁶ M
Now that we have the concentrations of both species, we can plug them into the Henderson-Hasselbalch equation to calculate the pH:
pH = pKa1 + log ([C₆H₆O₆²⁻] / [H₂C₆H₆O₆])
pH = -log(7.5 x 10⁻⁵) + log (7.08 x 10⁻⁶ / 0.0942) = 2.14

To learn more about ascorbic

https://brainly.com/question/31175658

#SPJ4

Using the Henderson-Hasselbalch equation the pH of the system is 2.14

The concentration of an acidic or basic species, the conjugate base or acid, and the pH of a solution are all connected by the Henderson-Hasselbalch equation.

We know that;

pH = pKa1 + log ([C₆H₆O₆²⁻] / [H₂C₆H₆O₆)

Then;

[H₂C₆H₆O₆] * [C₆H₆O₆²⁻] = Ka1 * [H₂C₆H₆O₆]²

[C₆H₆O₆²⁻] = Ka1 * [H₂C₆H₆O₆]

Therefore;

[C₆H₆O₆²⁻] = (7.5 x 10⁻⁵) * (0.0942) = 7.08 x 10⁻⁶ M

And we have that;

pH = -log(7.5 x 10⁻⁵) + log (7.08 x 10⁻⁶ / 0.0942)

pH = 2.14

Learn more aboutHenderson-Hasselbalch equation :https://brainly.com/question/31495136

#SPJ1

The product of this reaction is hydrochloric acid (HCl), which is classified as a lachrymator (a substance that causes tears). Benzoyl chloride is classified as a carcinogen, meaning that it has the potential to cause cancer.

A carcinogen is any substance, radionuclide, or radiation that is an agent directly involved in causing cancer. These substances can damage the genetic material within a cell, leading to uncontrolled cellular division and the formation of a tumor. Carcinogens can be found in a variety of natural and man-made environments and include agents such as asbestos, benzene, arsenic, radon, and ultraviolet radiation. Exposure to carcinogens can occur through inhalation, ingestion, direct contact, or skin absorption. Once inside the body, some carcinogens can be processed by the liver and converted into a more potent form of carcinogen, which can cause even more damage to the cells. The effects of carcinogens on human health can range from cancer to a variety of other health issues, including allergies, reproductive problems, and developmental delays.

Therefore the correct option is C.

To learn more about carcinogen

https://brainly.com/question/31733972

#SPJ4

If ground-glass joints are not separating easily, it is important to handle them carefully to avoid damage. The best way to separate ground-glass joints is to first apply a small amount of lubricant, such as glycerin or silicone grease, to the joints.

This will help to loosen the joints and make them easier to separate. However, if the joints are still stuck, it is important to avoid applying too much force or using tools that may cause damage to the glassware.
One technique that can be used to separate stubborn ground-glass joints is to apply gentle heat to the area around the joint using a heat gun or a Bunsen burner. This can help to expand the glass slightly and make it easier to separate the joints.
If these techniques do not work, it may be necessary to use a joint separator tool or a piece of rubber tubing to grip and twist the joint. Again, it is important to avoid using excessive force, as this can cause damage to the glassware.
In summary, the best way to separate ground-glass joints is to first apply a lubricant, followed by gentle heat and, if necessary, the use of a joint separator tool or rubber tubing. It is important to handle the glassware carefully to avoid damage.

learn more about glass here

https://brainly.com/question/31626098

#SPJ11

The average temperature of the atmosphere surrounding Earth has increased by about 1 degree Celsius since the pre-industrial era.

Over the past century, the Earth's surface temperature has risen by approximately 1 degree Celsius, with the majority of warming occurring in the past few decades. This increase in temperature is primarily caused by human activities, such as burning fossil fuels and deforestation, which release greenhouse gases into the atmosphere. These gases trap heat from the sun, causing the planet to warm.

The consequences of global warming include rising sea levels, more frequent and severe weather events, and damage to ecosystems and agriculture. Addressing the issue of global warming requires collective action on a global scale, with efforts to reduce greenhouse gas emissions and transition to cleaner, renewable energy sources.

Learn more about ecosystems here:

https://brainly.com/question/13979184

#SPJ11

The molarity of the dilute NaOH prepared by diluting 5.00 ml of 9.257 m NaOH to a final total volume of 100.00 ml is 0.1038 M.

Molar fixation, otherwise called molarity, amount focus, or substance fixation, is a unit used to depict how much a substance in an answer communicated as a level of its volume. The quantity of moles per liter, meant by the unit sign mol/L or mol/dm3 in SI units, is the most frequently involved unit indicating molarity in science. One mol/L of an answer's focus is alluded to as one molar, or 1 M.

The complete number of moles of solute in a specific arrangement's molarity is communicated as moles of solute per liter of arrangement. The volume of a solution is influenced by changes in the system's physical conditions, such as pressure and temperature, in contrast to mass, which changes with changes in the system's physical circumstances. The letter M, also referred to as a molar, stands for molarity. The solution has a molarity of one when one gram of solute dissolves in one liter of solution.

M1V1 = M2V2

Here

M1= 2.076 M

V1= 5.00 ml

M2= ?

V2= 100 .00 ml

Then;

M1V1 = M2V2

2.076 x 5.00  = M2 x 100.00

M2= 0.1038 M.

Learn more about Molarity:

https://brainly.com/question/26528084

#SPJ4

Fusion, vaporization, and sublimation are endothermic processes, whereas freezing, condensation, and deposition are exothermic processes.

For condensation the molecules are giving up their warmth energy. When molecules surrender warmth energy, it's miles known as exothermic. Condensation could be exothermic. It is essential to consider that vaporization is an endothermic system as warmth is eliminated from the liquid via boiling. The temperature of a liquid will continue to be regular on the boiling factor till all the liquid is vaporized. Freezing and condensation are exothermic strategies as warmth is eliminated, ensuing in lowering the molecules' speed, inflicting them to transport slower.

To learn more about freezing check the link below-

https://brainly.com/question/30654413

#SPJ4

A. The potential of the Ag/AgCl reference electrode is 0.197V, so we subtract that from -0.111V to get -0.308V. B. The potential of the calomel reference electrode is 0.241V, so we subtract that from 0.023V to get 0.462V.

An electrode is a device used to create an electrical connection between a conductor and a non-conductor. It is usually made of a conductive material, such as metal or graphite, or a semiconductor material, such as silicon. The electrode is used to transfer electrical energy from a power source to a device or circuit.

a) -0.111V versus Ag/AgCI = -0.308V versus S.H.E. To solve this, we subtract the potential of the Ag/AgCl reference electrode from the given potential.
The potential of the Ag/AgCl reference electrode is 0.197V, so we subtract that from -0.111V to get -0.308V.

b) 0.023V versus Ag/AgCI = 0.462V versus S.C.E.

To solve this, we subtract the potential of the calomel reference electrode from the given potential. The potential of the calomel reference electrode is 0.241V, so we subtract that from 0.023V to get 0.462V.

To learn more about electrode

https://brainly.com/question/28302450

#SPJ4

It is important to clean our glass ware immediately after use for a few reasons. Firstly, if left unwashed, the residue left behind by drinks or food can become stubborn stains that are difficult to remove.

This can lead to a build-up of grime and bacteria that could be harmful to our health. Secondly, cleaning glassware immediately after use prevents any odors or flavors from lingering and contaminating the next drink or food that is served in the glass. This is especially important in the case of wine glasses, where any residual wine left in the glass can mix with the next wine and alter its taste. Finally, cleaning glassware immediately after use helps to maintain the integrity of the glass itself. Over time, dirt and grime can cause scratches and weaken the glass, reducing its lifespan. By cleaning glassware immediately after use, we can ensure that it remains in good condition and is able to serve us well for a long time. Therefore, it is always best to clean glassware immediately after use to maintain its cleanliness, prevent contamination, and preserve its quality.

learn more about glass here

https://brainly.com/question/31626098

#SPJ11

The solubility product constant (Ksp) equilibrium expression for Hg2Br2 is:

Ksp = [Hg2+][Br-]^2

In this ionic compound, Hg2+ ion has a charge of +2 and Br- ion has a charge of -1. Therefore, the formula of the compound is Hg2Br2. When this compound dissolves in water, it dissociates into its ions:

Hg2Br2 (s) ⇌ 2 Hg2+ (aq) + 2 Br- (aq)

The solubility product constant (Ksp) is the equilibrium constant for the dissolution of a sparingly soluble compound in water. For Hg2Br2, the Ksp expression is:

Ksp = [Hg2+][Br-]^2

This expression shows that the solubility of Hg2Br2 in water depends on the concentrations of Hg2+ and Br- ions in the solution. If the product of their concentrations exceeds the value of Ksp, the excess ions will precipitate out of the solution until the equilibrium is reestablished.

learn more about ionic compound

https://brainly.com/question/2687188

#SPJ11

The percent ionization of a 0.331M solution of HCN is found to be 0.00337%.  The pH of the solution is  4.953. The correct option is E. 4.953.

To solve this problem, we need to use the equation for percent ionization:

% ionization = (concentration of ionized acid / initial concentration of acid) x 100%

We can rearrange this equation to solve for the concentration of ionized acid:

concentration of ionized acid = % ionization / 100% x initial concentration of acid

Plugging in the given values, we get:

concentration of ionized acid = 0.00337 / 100 x 0.331 = 0.000011187 M

Now, we can use the equation for the ionization of HCN to set up an expression for the equilibrium constant (Ka):

HCN + H2O ↔ H3O+ + CN-

Ka = [H3O+][CN-] / [HCN]

We can assume that the concentration of H3O+ is equal to the concentration of ionized acid, since the ionization of HCN produces one H3O+ ion for every HCN molecule that ionizes. We can also assume that the concentration of CN- is equal to the concentration of H3O+.

Therefore:

Ka = (concentration of ionized acid)^2 / (initial concentration of acid - concentration of ionized acid)

Plugging in the values we calculated, we get:

Ka = (0.000011187)^2 / (0.331 - 0.000011187) = 6.2 x 10^-10

Now, we can use the equation for the pH of a weak acid:

pH = pKa + log([A-] / [HA])

Since we assumed that the concentration of CN- is equal to the concentration of ionized acid, we can substitute [CN-] for [A-] and [HCN] - [CN-] for [HA]. We also know that pKa = -log(Ka).

Therefore:

pH = -log(6.2 x 10^-10) + log(0.000011187 / (0.331 - 0.000011187)) = 4.953

Therefore, the pH of the solution is e. 4.953.

To know more about percent ionization click here:

https://brainly.com/question/31358773

#SPJ11

The other product formed from the addition of HCl to 3-methyl-1-pentene is 1-chloro-3-methylpentane. This is because the HCl can add to the double bond in two different orientations,

leading to the formation of two possible products. The long answer would involve discussing the mechanism of the reaction and how the different orientations of HCl addition can lead to different products.when HCl is added to 3-methyl-1-pentene, it gives two products. One of them is 2-chloro-3-methylpentane,

as you mentioned. The other product is 3-chloro-3-methylpentane. This occurs due to the addition of HCl across the double bond in the alkene, leading to the formation of two different alkyl halides depending on the position of the chlorine atom.

To know more about HCl  visit:

https://brainly.com/question/29204122

#SPJ11

The answer is that bronze consists of mostly copper and approximately 12% tin.

Bronze is an alloy made up of two or more metals, with copper being the primary component. The addition of other metals to copper alters its properties, making it stronger, harder, and more durable.

Tin is the most common metal added to copper to create bronze, comprising approximately 12% of the alloy. Other metals, such as aluminum, nickel, or zinc, may also be added in varying amounts to create specific types of bronze for different purposes.

In summary, the answer to your question is that tin is the other element added to copper to create bronze, with approximately 12% of the alloy consisting of tin.


Bronze is an alloy primarily made up of copper and tin, with tin being the secondary element, usually present in about 12% of the composition. This combination of metals provides the alloy with improved strength, durability, and corrosion resistance compared to pure copper.

To know more about bronze  visit:

brainly.com/question/14636013

#SPJ11

In the preparation of aspirin and oil of wintergreen, sulfuric acid and phosphoric acid were used as catalysts to facilitate the reaction.

These acids acted as proton donors and helped to activate the reaction by lowering the activation energy required for the reaction to take place.

Sulfuric acid was used as a catalyst in the synthesis of aspirin because it helped to convert salicylic acid into acetylsalicylic acid, which is the active ingredient in aspirin. The acid also helped to remove any water present in the reaction mixture, which could have interfered with the reaction.

Phosphoric acid, on the other hand, was used as a catalyst in the synthesis of oil of wintergreen. It helped to convert salicylic acid into methyl salicylate, which is the active ingredient in oil of wintergreen. Like sulfuric acid, phosphoric acid also helped to remove any water present in the reaction mixture.

Learn more about a catalyst here:

https://brainly.com/question/31630881

#SPJ11

Answer:

Alkaline batteries are a type of primary battery prone to leaking potassium hydroxide.

Explanation:

A primary battery is a single-use battery; with the exception of some alkaline batteries, they cannot be recharged. Alkaline batteries are a type of primary battery designed as a direct replacement for dry cell batteries. They can deliver about three to five times the energy of a zinc-carbon dry cell battery of similar size. However, alkaline batteries are prone to leaking potassium hydroxide, so they should be removed from devices for long-term storage.

The correct answer is that an alkaline battery can deliver about thirty to fifty times the energy of a zinc-carbon dry cell of similar size. This is because alkaline batteries use a more efficient chemical reaction to produce electricity than zinc-carbon dry cell batteries.

It is important to note that primary batteries, including alkaline and zinc-carbon dry cell batteries, cannot be recharged and must be replaced when their energy is depleted. Additionally, while alkaline batteries are prone to leaking potassium hydroxide if left unused for a long time or if damaged, proper handling and storage can prevent this issue. Zinc-carbon dry cell batteries were not designed as direct replacements for alkaline batteries, but rather as a lower-cost alternative.

The correct statement among the given options is: alkaline batteries are a type of primary battery prone to leaking potassium hydroxide. Primary batteries, such as alkaline and zinc-carbon dry cell batteries, are designed for single-use and cannot be recharged. Alkaline batteries do have a higher energy capacity compared to zinc-carbon dry cells, but not 30-50 times more. Lastly, zinc-carbon dry cell batteries were not designed as direct replacements for alkaline batteries, as they have different chemistries and performance characteristics.

To know more about batteries visit:

https://brainly.com/question/11670669

#SPJ11

According to the Arrhenius definition, an acid is a substance that, when dissolved in water, produces hydrogen ions (H+).

An acid is a substance that produces H+ ions in water. To explain in more detail, the Arrhenius definition states that an acid is a substance that increases the concentration of H+ ions when dissolved in water. These H+ ions can then react with other substances, such as bases or metals, to form salts or other compounds. Examples of common acids according to this definition include hydrochloric acid (HCl) and sulfuric acid (H2SO4).

Arrhenius proposed this definition in the late 19th century, focusing on the behavior of acids in aqueous solutions. Under this definition, acids are substances that donate H+ ions to the solution, resulting in increased acidity and a lower pH value.

To know more about hydrogen ions, visit:

https://brainly.com/question/15082545

#SPJ11

Based on the given information, a student injects a 50:50 mixture of ethylbenzene and toluene on the GC (gas chromatography). To predict the order of elution for this mixture, we need to consider the properties of both compounds.

Toluene has a molecular formula of C7H8, while ethylbenzene has a molecular formula of C8H10. Ethylbenzene has a higher molecular weight and stronger van der Waals forces compared to toluene. In gas chromatography, compounds with lower molecular weight and weaker interactions with the stationary phase usually elute first.

Therefore, based on the differences in molecular weight and intermolecular forces, the order of elution for this mixture would be toluene followed by ethylbenzene. In short, the correct order is: toluene; ethylbenzene.

To know more about ethylbenzene please visit....

brainly.com/question/31813690

#SPJ11

Lattice enthalpy of dissociation of Na₂O is +3739 kJ/mol.

Na₂O dissociates into two Na+ and one O2- ions. Using the Born-Haber cycle and Hess's law, we can calculate the lattice enthalpy of dissociation as the sum of the following steps: Na solid → Na(g) + 108 kJ/mol, 1/2 O2(g) → O(g) + 1st EA = +108 kJ/mol, Na(g) → Na+(g) + e- + 496 kJ/mol, O(g) + e- → O-(g) + 2nd EA = +649 kJ/mol, Na+(g) + O2-(g) → Na2O(s) + Lattice Enthalpy. Solving for Lattice Enthalpy gives +3739 kJ/mol.

Learn more about  ionization energy here:

https://brainly.com/question/28385102

#SPJ11

The balanced equation for the reaction is:

2Sr(s) + O2(g) → 2SrO(s)

The molar mass of Sr is 87.62 g/mol.

The given amount of Sr is 15.4 g.

We can use the stoichiometry of the balanced equation to find the number of moles of SrO that will be produced when 15.4 g of Sr is completely consumed. According to the balanced equation, 2 moles of Sr produces 2 moles of SrO. Therefore, 1 mole of Sr produces 1 mole of SrO.

Moles of Sr = mass/molar mass = 15.4 g/87.62 g/mol = 0.1759 mol

From the stoichiometry of the balanced equation, we can see that 1 mole of Sr produces 1 mole of SrO. Therefore, 0.1759 moles of Sr will produce 0.1759 moles of SrO.

The molar mass of SrO is 103.62 g/mol. Therefore, the mass of SrO produced is:

mass of SrO = moles of SrO × molar mass of SrO

mass of SrO = 0.1759 mol × 103.62 g/mol

mass of SrO = 18.2 g

Therefore, 18.2 g of SrO will be produced when 15.4 g of Sr is completely consumed.

To know more about mole concept, click here:-

https://brainly.com/question/31123980

#SPJ11

Here are the oxidation states for 6 of the 12 inorganic salts:
a. Al(OH)3: Al has an oxidation state of +3.
b. AIPO4: Al has an oxidation state of +3.
c. KAl(SO4)2: Al has an oxidation state of +3.
e. CaCl2: Ca has an oxidation state of +2.
f. Na2SO4: Na has an oxidation state of +1.
h. MgCl2: Mg has an oxidation state of +2.

The oxidation state, also known as oxidation number, represents the charge an atom would have if all its bonds were considered ionic.

In the given inorganic salts, the oxidation state of the metal is determined by balancing the charges of the other ions.

Summary: Oxidation states are important for understanding inorganic salts. In this case, 6 salts were analyzed and their metal oxidation states were determined as: Al(OH)3, AIPO4, and KAl(SO4)2 with Al having +3; CaCl2 with Ca having +2; Na2SO4 with Na having +1; and MgCl2 with Mg having +2.

Learn more about oxidation click here:

https://brainly.com/question/13182308

#SPJ11

The correct answer is: "The mass number and atomic number decrease."Option (1)

Alpha decay is a type of radioactive decay in which an atomic nucleus emits an alpha particle, which consists of two protons and two neutrons, from its nucleus. During alpha decay, the mass number of the parent nucleus decreases by four and the atomic number decreases by two, as two protons are lost in the process.

The resulting daughter nucleus has a mass number that is four units lower and an atomic number that is two units lower than the parent nucleus. The energy released during alpha decay is typically in the form of gamma rays. Alpha decay is commonly observed in heavy elements, such as uranium and plutonium, as well as in some isotopes of lighter elements, such as radon.

Therefore, the correct answer is: "The mass number and atomic number decrease."

To learn about Alpha decay

https://brainly.com/question/14081292

#SPJ4

Full Question: describe what changes occur during alpha decay. group of answer choices

The standard free energy of formation (ΔG°f) is the energy change that occurs when one mole of a compound is formed from its constituent elements in their standard states.

When ΔG°f equals zero, it means that the compound is in a state of thermodynamic equilibrium, where the reactants and products have equal energy. However, identifying the compound with ΔG°f equal to zero from the given options (NaI(s), H2(g), O3(g), and NO(g)) is difficult as it depends on various factors such as temperature, pressure, and the method used for the calculation.

The values of ΔG°f can vary significantly based on these factors, and it is possible for none of the given options to have ΔG°f equal to zero. It is hard to determine the compound with the standard free energy of formation equal to zero from the given options. The explanation is that ΔG°f depends on multiple factors and can vary significantly, making it difficult to identify a compound with certainty.

To know more about temperature refer to

https://brainly.com/question/15267055

#SPJ11

Overall, the equilibrium position of a chemical system will shift in a way that minimizes the effect of a disturbance, in accordance with Le Chatelier's principle.

If the disturbance causes a change in temperature or pressure, the equilibrium position will shift in a way that counteracts the effect of the disturbance. For example, if the temperature is increased, the equilibrium will shift in the endothermic direction to absorb the excess heat and restore the equilibrium. If the pressure is increased, the equilibrium will shift in the direction with fewer moles of gas to reduce the pressure and restore the equilibrium.

In some cases, the disturbance may cause the equilibrium position to temporarily fluctuate, but eventually the equilibrium will return to its original position as the system adjusts to the new conditions. This is because the equilibrium position is determined by the relative energies of the reactants and products, and this energy balance is maintained even if the rate of the reaction changes in response to the disturbance.

To know more about equilibrium,

https://brainly.com/question/29627805

#SPJ11

The pH of the solution after the addition of 0.0500 moles of NaOH is 3.12

Moles are small mammals that have a uniform appearance of dark fur and have a pointed snout and small eyes. They are found throughout most of the world and are known for their digging and burrowing activities. They are solitary creatures, living alone in underground tunnels and chambers.

The pH of the buffer solution can be calculated using the Henderson-Hasselbalch equation.
pH = pKa + log([NaOH]/([H₂F-] - [NaOH]))
where pKa is the acid dissociation constant of the weak acid, [NaOH] is the initial concentration of the strong base and [H₂F-] is the initial concentration of the weak acid.
In this case, [NaOH] = 0.0500 moles and [H₂F-] = 0.250 moles.
pKa = -log(3.5 x 10⁻⁴) = 3.46
Therefore, the pH of the solution after the addition of 0.0500 moles of NaOH is:
pH = 3.46 + log(0.0500 / (0.250 - 0.0500)) = 3.12

To learn more about moles

https://brainly.com/question/15356425

#SPJ4

The pH of the solution after the addition of 0.0500 moles of NaOH is found to be at 3.12

The pH of a solution is described as a measure of hydrogen ion concentration, which in turn is a measure of its acidity.

We apply the Henderson-Hasselbalch equation, to determine the pH of the buffer solution:

pH = pKa + log([NaOH]/([H₂F-] - [NaOH]))

pKa = acid dissociation constant of the weak acid,

[NaOH] =  initial concentration of the strong base

[H₂F-] =  initial concentration of the weak acid.

We have f=given values as:

[NaOH] = 0.0500 moles

[H₂F-] = 0.250 moles.

pKa = -log(3.5 x 10⁻⁴) = 3.46

pH = 3.46 + log(0.0500 / (0.250 - 0.0500)) = 3.12

In conclusion,  the pH of the solution after the addition of 0.0500 moles of NaOH is 3.12.

Learn more about Henderson-Hasselbalch equation at:

https://brainly.com/question/13423434

#SPJ4