a 1.00 g sample of potassium bicarbonate is decomposed by heating. part a if the resulting potassium carbonate weighs 0.710 g and the calculated yield is 0.690 g , what is the percent yield? general exercises

Answers

Answer 1

The percent yield will be 103 %

Mass of potassium bicarbonate = 1.00 g

Molar mass of potassium bicarbonate = 100.115 g/mol

Mass of potassium carbonate = 0.710 g

Molar mass of potassium bicarbonate = 138.205 g/mol

Calculated yield = 0.690 g

Percent yield = ?

Calculated yield is given, if not you can find out by following steps:

Write the balanced chemical equation

    2KHCO₃ →  K₂CO₃ + H₂O + CO₂

Hence 2 moles of KHCO₃ decompose to produce 1 mole of K₂CO₃

This means that 2 × 100.115 g of KHCO₃ will produce 138.205 g of K₂CO₃

    Calculate for 1 g = 138.205  / 200.23

    Calculate for 1 g = 0.690 g

This means that 1 g of KHCO₃ will produce 0.690 g of K₂CO₃

Now calculate % yield

    % yield = (actual yield / calculated yield)

    % yield = (0.710 / 0.690) 100

    % yield = 1.029 * 100

    % yield = 103 %

You can also learn about percent yield from the following question:

https://brainly.com/question/17042787

#SPJ4


Related Questions

in a titration, 20 ml of 0.056 m koh was titrated with 0.20 m hcl. calculate the ph of the resulting solution after the addition 0 ml of the acid? (give your answer to two decimal places)

Answers

The pH of the final product is 7.

the pH of the final mixture following the addition of 0 ml of acid is?

The quantity of hydrogen and hydroxyl ions in a solution determines pH. The negative logarithm of the hydrogen ion concentration is another name for pH.

A solution's pH defines how basic and how acidic it is. It establishes how many protons have been released or given. We have the situation as it stands.

0.20 molar HCL after titrating 0.056 molar koh.

20 ml of the solution yield a pH of 7.

Consequently, the given solution's pH value is 7.

Titration is employed in quantitative tests to keep the solution's concentration constant. The balancing of volume and concentration can be distinguished by a subtle shift in color.

To know more about Titration visit:-

https://brainly.com/question/2728613

#SPJ4

The significance of the Ronald Cotton case:
a. it shows that a serial killer can be indicted 20 years after the crimes
b. it demonstrates the fallibility of eyewitness accounts
c. that a person can be convicted of murder, even without a body
d. that a person can be convicted without individual evidence

Answers

The significance of the Ronald Cotton case, that a person can be convicted without individual evidence. Therefore, option D is correct.

What is evidence ?

Evidence is something or information used to increase or decrease the likelihood that a fact exists. Evidence can be testimony, written materials, visual or audio recordings, DNA samples, or other physical artifacts.

In essence, evidence is utilized to support a claim made by people or organizations who think something is real or a fact. Evidence may also be used to debunk or dispute a fact or claim that others don't agree with or believe to be incorrect.

Thus, option D is correct.

To learn more about evidence, follow the link;

https://brainly.com/question/14370298

#SPJ1

For the following element symbols, write the charge on each element needed in order to
make that element isoelectronic with a noble gas. Ex: F​ -1
a) Al _____
b) F _____
c) Li _____
d) Be_____
e) Se_____
f) Rb_____
g) In_____
h) C _____
i) Group 2 _____
j) Group 14 _____
k) Group 17 _____
l) Group 13 _____

Answers

The charge on the following element symbols are as follows:

a) Al : +3

b) F : -1

c) Li : +1

d) Be : +2

e) Se : +2

f) Rb : +1

g) I : -1

h) C : ±4

i) Group 2 : +2

j) Group 14 : +4 and +2

k) Group 17 : -1

l) Group 13 : +3 and +1

What is the electrical charge on different elements in periodic table?

The charge on each element is the number of electrons gained or donated by the atom in order to reach a stable noble gas configuration.

These charges can be positive if the electrons are donated. For example, sodium(Na) has 11 electrons and if it donate 1 electron to achieve the electronic configuration of Neon (Ne) and result in +1 charge on sodium.

Similarly if an atom lose electron(s) to reach a stable configuration the atom will have a negative charge.

To know more about periodic table visit:

https://brainly.com/question/11155928

#SPJ13

Help me with this one pleaseee

Answers

protons =56
electrons =56
neutrons =81

In which cell is there is an absence of homologous chromosomes?

Answers

The cell where there is an absence of homologous chromosomes is Gamete.

Chromosomes in a couple – commonly one inherited from the mother and one from the daddy. For example, the two copies of Chromosome 1 in a cell could be called homologous chromosomes.

This organism is diploid, however only has a 1 pair of chromosomes. these are homologous chromosomes, because they create the same genes. however, they can deliver distinct alleles of every gene, proven by their inner pattern.

Homologous chromosomes are matched pairs containing the identical genes in equal places along their period. Diploid organisms inherit one reproduction of every homologous chromosome from every discern; all together, they may be considered a complete set of chromosomes.

Learn more about Homologus chromosome here:-

https://brainly.com/question/14807934

#SPJ4

the solubility of barium fluoride baf2 in water is 7.5 x 10^-3 m. calculate the solubility product constant of this salt.

Answers

The solubility product constant of this salt is 0.00625 M.

What is molar solubility?

A compound's capacity to dissolve in a given substance is known as its molar solubility (M), which is a unit of measurement. Molar solubility is measured as moles/L and is more specifically the maximum number of moles of a solute that can dissolve in one litre of solvent.

The quantity of moles dissolved in a solution volume of 1 L is known as its molar solubility.

When BaF2 breaks down,

BaF₂ → Ba₂⁺ + 2F⁻

If BaF2 has a molar solubility of X and Ba₂+ and F have molar solubilities of X and 2x, respectively, the solubility product constant -ksp is calculated as follows:

ksp = [Ba²⁺][F⁻]²

ksp = X × (2X)²

ksp = 4X³

since ksp = 7.5 x 10⁻³

4X³ = 7.5 x 10⁻³

X = 0.00625 M

BaF₂ has a 0.00625 M molar solubility.

To know more about molar solubility visit:

https://brainly.com/question/9691627

#SPJ4

an unknown gas effuses through an opening at a rate that is one third that of helium gas. what is the molar mass of the unknown gas?

Answers

The molecular mass of a unknown gas would be 36g/mol.

According to Graham's law of Effusion , we can find the molecular mass of a unknown gas. Rate of effusion of gas 1 / rate of effusion of gas 2 = square root of molecular weight of helium gas / molecular weight of unknown gas.

                                  (1/3) / 1 = (square root of 4g/mol)/ MW of x

                                          =   36 gm/mol

Graham's Law states that the rate of effusion of a gas is inversely proportional to square root of the density of the gas. Since equal volumes of gas at the same temperature and pressure contain equal number of gas molecules, the rate of effusion is also inversely propotional to the square root of molecular weight of the gas. The gas with the lowest molecular weight effuses the fastest and vice versa.

Law deals with the rate at which a gas will escape from a pinhole into a vaccum, which is different from Graham's law of diffusion.

Learn more about Graham's Law here https://brainly.com/question/22359712

#SPJ4

what is the concentration of cl-1 ions when 10.0g of calcium chloride (cacl2) is dissolved in a solution with a total volume of 250.0ml?

Answers

0.72M is the concentration of cl-1 ions when 10.0g of calcium chloride (Cacl2) is dissolved in a solution with a total volume of 250.0ml.

What concept is utilized here?

The key here is to realize that a solution of calcium chloride, CaCl2, will always contain twice as many chloride anions, Cl−, than calcium cations, Ca2+.

This means that one mole of calcium chloride, which contains one mole of formula units of calcium chloride, will have one mole of calcium cations, 1× Ca2+ two moles of chloride anions, 2×Cl−.

The sample given to you contains

10.0g ×mole CaCl2 /110.98g

= 0.0901 moles CaCl2

The solution will thus contain

{0.0901moles Ca2+, 2× 0.0901 moles Cl−}

The two ions' respective concentrations will be

[Ca2+]= Ca2+ 0.0901 moles/ 250× 10^-3

= 0.36M

[Cl−]=  Cl−2× 0.0901moles/ 250× 10^-3= 2× 0.36

M= 0.72M

To know more about CaCl2, visit-https://brainly.com/question/16960783

#SPJ4

When 75. 4 j of energy is absorbed by 0. 25 mol of ccl4, what is the change in temperature? the specific heat of ccl4 is 0. 861 j/g· °c and its molecular mass is 153. 8 g/mole.

Answers

The change in temperature of the system is 2.28 °C.

The change in temperature of the system depends on the heat released. The total heat received by the system will equal to total heat released by objects. It should follow

Q released = Q received

The heat can be defined by

Q = m . c . ΔT

where Q is heat, m is mass, c is the specific heat constant and ΔT is the change in temperature.

The given parameters are

Q = 75.4 J

n = 0.25 mol

Mr CCl₄ = 153.8 g/mole

c = 0.861 J / g. °C

Find the mass of CCl₄

n = m / Mr

0.25 = m / 153.8

m = 38.45 grams

Find the change in temperature

Q = m . c . ΔT

75.4 = 38.45 . 0.861 . ΔT

ΔT = 2.28 °C

Find more on changes in temperature at: https://brainly.com/question/8925446

#SPJ4

Which reactant is getting reduced and which reactant is getting oxidized?

Answers

In the reaction

2Mg(s)+CO₂(g)→2MgO(s)+C(s)

The reactant which is going to oxidised is Mg(s) and the reactant which is going to reduce is CO₂(g).

Oxidation is defined as the loss of electron from the element, whereas reduction is defined as the gain of electron done by the element. When any element is present in solid form, its oxidation state is zero. Hence, the oxidation state of Mg(s) and C(s) is zero. The oxidation state of O is -2. On product side, the oxidation state of Mg is

x+(-2)=0

x-2=0

x=+2

The oxidation state of Mg is increased from zero(0) to 2. Hence, Mg(s) is oxidised.

The oxidation state of C in CO₂(g) is

x+2(-2)=0

x+(-4)=0

x-4=0

x=4

The oxidation state of C is decreased from +4 to 0. Hence, C in CO₂ is reduced in the reaction.

Therefore, the reactant which is going to oxidised is Mg(s) and the reactant which is going to reduced is CO₂(g).

To know more about redox reaction

https://brainly.com/question/14216150

#SPJ1

imagine you can treat heat as a reactant or a product of a reaction. what do the observations about the temperature dependence in parts c and d tell you about the change in these two reactions. i.e. is heat a product or a reactant for these reactions, and what does that say about whether they are endo or exothermic?

Answers

If heat is supplied to the reaction, it is endothermic reaction. If heat is evolved during a reaction it is called exothermic reaction.

What is exothermic reaction?

In every chemical process, energy is involved. When new bonds form in products, energy is produced. Energy is used to break bonds in reactants.

When new bonds form in the products of some chemical reactions, known as endothermic reactions, less energy is released than is required to break bonds in the reactants.

Exothermic reactions work the other way around. It requires less energy to break bonds in the reactants than is produced when new bonds form in the products in an exothermic reaction.

Exothermic reactions characterize all combustion processes. A substance burns when it reacts with oxygen in a combustion reaction. Burning materials often release energy in the form of heat and light.

Therefore, If heat is supplied to the reaction, it is endothermic reaction. If heat is evolved during a reaction it is called exothermic reaction.

To learn more about exothermic reaction, refer to the link:

https://brainly.com/question/10373907

#SPJ1

co3 forms a more stable complex with the chelating ligand en (h2nch2ch2nh2) than it does with the monodentate ligand methylamine (ch3nh2). what is the reason that [co(en)3]3 is more stable than [co(ch3nh2)6]3 ?

Answers

[CO(en)₃]³⁺   is more stable than [CO(CH₃NH₂)]³⁺ to make more stable complex because of chelate effect.

[CO(en)₃]³⁺  is a metal chelate due to presece of bidentate ligand ethylene diamine ligand. Metal chelates are more stable than complexes containing only monodentate ligands because of the chelate effect, we expect ethylenediamine to form a stronger complex with Co than ammonia.

The Chelate Effect is that complexes resulting from coordination with the chelating ligand is much more thermodynamically stable than complexes with non-chelating ligands.

The chelate effect defined as  the augmented affinity of chelating ligands for any metalic ion in comparison of the affinity of a similar nonchelating ligands for the same metallic ion.

learn more about chelate effect at https://brainly.com/question/15242975

#SPJ4

Sodium is much more apt to exist as a cation than is chlorine. This is because ________.

Answers

Compared to chlorine, sodium is significantly more likely to exist as a cation. This is so because chlorine ionizes with a higher energy than sodium.

What is the crucial factor here?

The ionization energy is the minimal energy needed to remove the valence electron that is weakly bound from the isolated gaseous atom. As a result, removing one electron from sodium is simple since it will adopt the structure of a noble gas and become stable. Chlorine, however, does not fall into this category, so it has a higher ionization energy than sodium. Because chlorine has a higher ionization energy than sodium, sodium is much more likely to exist as a cation.

To know more about Ionization energy, visit-https://brainly.com/question/1602374

#SPJ4

over all spatial arrangement of atoms in a protein is called as secondary structure.select one:truefalse

Answers

The over all spatial arrangement of atoms in a protein is called secondary structure. This is false . it is called as conformation.

The over all spatial arrangement of atoms in a protein is called as conformation. The primary structure of protein is called as amino acid.  the local spatial arrangement of the polypeptide chain is explained the  secondary structure. the overall spatial arrangement is called as conformation. The native conformation is the  conformation of functional protein.

Thus, The over all the spatial arrangement of atoms in a protein is called secondary structure. This is false . it is called as conformation.

To learn more about spatial arrangement of atom here

https://brainly.com/question/8758055

#SPJ4

what is the iupac name for the compound shown? the molecule has the formula c h 3 c h 2 c o o h. iupac name:

Answers

Although it is more frequently referred to as lactic acid, the IUPAC nomenclature for it is 2-hydroxypropanoic acid.

What does Iupac's naming scheme entail?

Whether in a linear chain or a ring, the main chain of carbons joined by a single bond serves as the basis for IUPAC nomenclature. According to a particular set of priorities, all deviations, whether numerous links or atoms other than hydrogen and carbon are denoted by prefixes or suffixes.

What is a good IUPAC example?

Therefore, the IUPAC name is 2,5,5-trimethyl-2-hexene. The blockchain in example (2) that contains both carbon atoms from the double bond is five atoms long. There is a six chain present, but there is only one double-bonded carbon atom in the chain. Consequently, this compound's root name will be

To know more about Iupac visit:

https://brainly.com/question/16631447

#SPJ4

What is the empirical formula of a substance that contains 2. 64 g of c and 0. 444 g of h?.

Answers

The empirical formula for the compound is CH₂

The empirical formula

The empirical formula is a formula that states the ratio of the number of elements that make up the simplest molecule. While the molecular formula is the actual formula that states the number of elements that make up a molecule.

Calculated the number of moles of different atoms.

Number of moles of Carbon:

n = (given mass of  carbon)/(molar mass of carbon)

= 2.64 g/12.011 gmol⁻¹

= 0.220 mol

Number of moles of Hydrogen:

(given mass of hydrogen)/(molar mass of hydrogen)

= 0.444 g/1.008 gmol⁻¹

= 0.440 mol

Ratio of carbon:

= 0.220/0.220

= 1

Ratio of hydrogen:

= 0.444/0.220

= 2

The ratio of C : H : O = 1 : 2

So, the empirical formula is CH₂

Learn more about empirical formula here: https://brainly.com/question/1603500

#SPJ4

An atom of sodium has 11 electrons. Make a sketch of a sodium atom, showing how many electrons it has at each energy level. Infer how reactive sodium atoms are.

Answers

11 electrons make up sodium. Consequently, sodium's electrical arrangement is (2,8,1).

How do electrons work?

The negatively charged components of an atom are called electrons. A positive proton, a negative electron, and a neutral neutron make up an atom. Electrons are atom-revolving, negatively charged particles.

The earth has about 118 different elements. Sodium is a crucial component. Sodium has an atomic number of 11. In sodium, the first shell has two electrons, the second shell has eight, and the third shell will have one electron.

A metal is sodium. It will become a cation after losing that one electron. It changed to Na+.

We are aware that sodium has an atomic number of 11. This informs us that sodium possesses 11 protons and 11 electrons due to its neutral state.

Sodium therefore has 11 electrons. Consequently, sodium's electrical arrangement is (2,8,1).

To know more about sodium visit:

https://brainly.com/question/25640214

#SPJ4

again considering the conversion of 1 g of liquid water to 1 g water vapor, does this process add or remove heat from the surrounding environment?

Answers

The conversion of 1 g of liquid water to 1 g of water vapor, removes heat from the surrounding environment.

Water vapor, water vapor, or aqueous vapor is the gaseous section of water. it's far one state of water in the hydrosphere. Water vapor can be made out of the evaporation or boiling of liquid water or from the sublimation of ice. Water vapor is transparent, like the maximum elements of the environment.

Water vapor is water in gaseous rather than liquid form. it may be fashioned both through a technique of evaporation or sublimation. not like clouds, fog, or mist that is surely suspended debris of liquid water within the air, water vapor itself cannot be seen because it's miles in gaseous form.

Learn more about water vapor here:-https://brainly.com/question/422363

#SPJ4

Which is the correct equation to use when performing calculations involving the dilution of a solution?.

Answers

The correct equation to use when performing calculations involving the dilution of a solution is Option c) Mconc × Vconc = Mdil × Veil.

Dilution is the procedure of reducing the concentration of a solute in an answer, usually truly by way of blending with an extra solvent like including more water in the solution. To dilute a solution approach to feature greater solvents without the addition of greater solute.

Dilution is the manner of lowering the concentration of a given solute in its answer. The chemist can do it surely by way of blending with more solvent. as an example, we are able to upload water to the focused orange juice to dilute it till it reaches a concentration so that it will be great to drink.

Dilution is the method of lowering the attention of a solute in an answer, usually certainly by mixing with a greater solvent like including more water in the solution. To dilute a solution way to feature more solvents without the addition of greater solute.

Learn more about dilution here:-https://brainly.com/question/24881505

#SPJ4

Disclaimer:- your question is incomplete, please see below for the complete question.

Which is the correct equation to use when performing calculations involving the dilution of a solution?.

a) Mconc/Vconc = Mdil/Vdil

b) Mconc × Vdil = Mdil × Vconc

c) Mconc × Vconc = Mdil × Vdil

d) Vconc/Mconc = Vdil/Mdil

which qualitative analysis test from this module can help distinguish between different kinds of ketones? can this same test give a positive result for 4-methylacetophenone? why?

Answers

Bradys test is the test used for the qualitative analysis of different types of ketones.

the name of the reagent used in the Bradys test is  2,4-dinitrophenylhydrazine.

it reacts with aldehyde and ketones to give coloured precipitate. 2,4-DNP is red in colour but when it reacts with ketone it gives an orange colour and if it reacts with carbonyl compound and aromatic compound then it gives red precipitate.

now talking about 4-methylacetophenone .yes Bradys test gives positive response to this compound.

when 4-methylacetophenone reacts with 2,4-DNP it gives red precipitate due to hydrazone formation.

bradys give positive test for ketones & aldehyde.

learn more about aldehyde  here;

https://brainly.com/question/17101347

#SPJ4

complete the sentence.
The ........
the forces between
the particles, the further apart the particles will be.

Answers

The weaker the forces between the particles, the father apart the particles will be. The attraction between the particles is due to the intermolecular force of attraction between them.

What are intermolecular forces?

The intermolecular force is an attractive force between the positive component of one atom to the negative component of another atom. There are 4 types of attractive forces namely, hydrogen bonds, dispersion, dipole-dipole and ion-dipole.

The particles are attracted to each other due to the intermolecular force between them. the stronger the force of attraction, the nearer the particles will be.

Therefore, the weaker the intermolecular forces between the particles, the farther apart the particles will be.

To learn more about intermolecular forces click on the given link https://brainly.com/question/12243368

#SPJ9

Relative mass of mg(oh)2

Answers

The molar mass of Mg(OH)2 is 58.3 g mol−1.

The relative atomic mass of an element indicates its mass compared to the mass of atoms of other elements. Carbon has a relative atomic mass of 12 and magnesium has a relative atomic mass of 24. This means that each magnesium atom has twice the mass of a carbon atom. Atomic weights related to 1/12th the mass of a carbon atom are called relative atomic masses.

It is called the relative atomic mass because it compares the atomic mass to 1/12 the mass of a carbon atom. Relative mass is the average atomic mass of all isotopes present expressed as a percentage, and absolute mass is the sum of proton number and neutron mass. As the speed of an object approaches the speed of light, its relativistic mass m becomes infinite.

Learn more about Relative mass here:-https://brainly.com/question/145032

#SPJ9

when an electric current is passed through water, hydrogen and oxygen gases are liberated. part a what stp volume of oxygen gas is obtained from the electrolysis of 100.0 ml of water?

Answers

62.22L volume of oxygen gas is produced throughout the electrolysis process of 100.0 ml of water.

Equation:

Volume of water equals 100.0 ml.

Water has a density of 1.000g/ml.

Mass of water = Density x volume

Mass of water = 1.000g/ml x 100ml

= 100g.

Water has a molar mass of 18 g/mol.

Mass / molar mass

= 100/18

= 5.55 moles of water.

Using the partial equation

2H2O ------> O2 + 4H+ + 4e- (oxidation)

At STP, 1 mole of oxygen gas is created from 2 moles of water.

Therefore, at STP,

5.55 moles of water will result in

⇒1/2 x 5.55

= 2.77 moles of oxygen.

One mole of oxygen takes up 22.4L at STP.

Therefore, 2.77mol will take up

⇒2.77 x 22.4

= 62.22 Liters.

As a result, 62.22L of oxygen gas were produced throughout the electrolysis process.

To know more about electrolysis, visit:

https://brainly.com/question/12054569

#SPJ4

Which food group has the largest carbon footprint and requires the most water to produce?.

Answers

Food group has the largest carbon footprint and requires the most water to produce is bovine meat

The carbon footprint is the total amount of greenhouse gases that are generated by our action and the average carbon footprint for a person in the united state is 16 tons and one of the highest rates in the world and globally the average carbon footprint is closer to 14 tons and beef has the highest carbon footprint of any food and this is because of what is required to raise and farm cattle and animals used for beef production require a tremendous amount of feed and which must be grown on its own and they also produce an extremely high amount of methane and meat as well as cheese and eggs have the highest carbon footprint and in the fruits, vegetables as well as beans and nuts have much lower carbon footprint

Know more about footprint

https://brainly.com/question/8746255

#SPJ4

what is the number of molecules of water in 34.20 gm of sugar?​

Answers

The number of molecules present in 34.20 grams of sugar is 6.02*10²⁴.

Solution:

1 mole of any compound contains Avogadro's number of molecules.

Number of moles = mass/molar mass

Number of moles = 34.2/342

Number of moles = 0.1

Number of molecules in 1 mole of sugar = 6.02*10²³

Number of molecules 0.1 moles of sugar = 0.1/6.02*10²³

Number of molecules = 6.02*10²⁴

To determine the number of molecules needed first determine the molecular weight of one mole of the substance then divide the molar mass value by the molecular weight and multiply by the Avogadro constant. The molar mass of a substance is the mass of 6.022 × 1023 atomic molecular or formula units of that substance. The number of grams in a mole is always equal to the number of atomic mass units representing atomic molecular and formula masses.

Learn more about Molecules here:-https://brainly.com/question/26044300

#SPJ9

q9 (1pts) which of the following substances will display an incomplete octet in its lewis structure? a) co2 b) cl2 c) icl d) no e) so2

Answers

No substance's Lewis structure will ever show an unfinished octet.

How to find out incomplete octet?

With fewer than eight valence electrons, certain atoms of specified elements can form stable bonds. When this occurs, the atom of the element included in the molecule is thought to retain a partial octet.

Boron, aluminum, beryllium, and hydrogen are typical examples of these elements, all of which are stable with just two valence electrons (stable with only 6 valence electrons). For all other periods below period 1, this is comparable to the octet rule, with the exception of hydrogen, where a noble gas structure should be assigned two valence electrons instead (like He).

The valence electrons in stable compounds that do not have a noble gas structure can be produced by covalent compounds in groups 2 and 3.

To know more about octet rule, visit:

https://brainly.com/question/865531

#SPJ4

Determine the freezing point of a solution that contains 78. 8 g of naphthalene (C10H8, molar mass = 128. 16 g/mol) dissolved in 722 mL of benzene (d = 0. 877 g/mL). Pure benzene has a melting point of 5. 50°C and a freezing point depression constant of 4. 90°C/m. 0. 74°C4. 76°C4. 17°C1. 68°C1. 33°C

Answers

The freezing point of a solution that contains 78. 8 g of naphthalene (C10H8, molar mass = 128.16 g/mol) dissolved in 722 mL of benzene (d = 0. 877 g/mL) is

First we need to find out the mass of benzene using volume and density. The formula of density is

density=mass×volume

Rearrange and solve for the mass of benzene

mass=density×volume

mass=0.877g×722 mL/mL

mass=633.194 g

Convert this mass in kg

633.194 g×(1 kg/1000 g)=0.633194 kg

To find freezing point of solution, first we need to find out ΔT_f which is given as

Δ(T_f)=i×(K_f)×m

Where, m-molality

i- Van't hoff factor=1 (as naphthalene is non-electrolyte)

(K_f) = 4.90°C/m

Molality is calculated using formula

molality=(moles of solute/mass of solvent)

The solute is naphthalene and its moles is

mole = 78.8 g×(1 mol/128.16 g)

=0.61486 mol

Hence, the molality of solution is

molality=(0.61486 mol/0.633194 kg)

=0.97104 mol/kg

=0.97104 m (∵m=mol/kg)

Plug all values in the formula

Δ(T_f)=1×(4.90°C/m)×0.97104 m

Δ(T_f)=4.7581°C

The another formula of Δ(T_f) is

Δ(T_f)=T_f(solvent)-T_f(solution)

Rearrange formula for T_f(solution)

T_f(solution)=T_f(solvent)-Δ(T_f)

∴T_f(solution)=(5.50-4.7581)°C

∴T_f(solution)=0.7419°C

T_f(solution)=0.74°C

Therefore, the freezing point of a solution is 0.74°C.

To know more about freezing point

https://brainly.com/question/14846166

#SPJ4

This body part in squids allows them to propel themselves rapidly by sucking in through the mantle and out through the ___________.

Answers

This body part in squid allows them to propel themselves rapidly by sucking in through the mantle and out through the siphon.

The siphon is a large tube at the bottom of the giant squid's body and allows it to move. The giant squid draws air into a siphon and pushes the air out to propel itself forward.

Squids have a tubular bodies and small rod-like internal structures called pens, which help support the squid's body. The mantles help protect the cavity of the squid, as well as help it move, as they suck water in and then push it out.

Learn more about siphon structure here https://brainly.com/question/13812290

#SPJ4

If a chemist wants to make 50g of HClO3, what is the minimum number of grams of ClO2 that she must use?
the reaction is 6ClO2+3H2O=5HClO3+HCl

Answers

Taking into account the reaction stoichiometry, the minimum number of grams of ClO₂ that a chemistry must use to make 50 g of HClO₃ is 47.92 grams.

Reaction stoichiometry

In first place, the balanced reaction is:

6 ClO₂ + 3 H₂O  → 5 HClO₃ + HCl

By reaction stoichiometry (that is, the relationship between the amount of reagents and products in a chemical reaction), the following amounts of moles of each compound participate in the reaction:

ClO₂: 6 molesH₂O: 3 molesHClO₃: 5 molesHCl: 1 mole

The molar mass of the compounds is:

ClO₂: 67.45 g/moleH₂O: 18 g/moleHClO₃: 84.45 g/moleHCl: 36.45 g/mole

Then, by reaction stoichiometry, the following mass quantities of each compound participate in the reaction:

ClO₂: 6 moles ×67.45 g/mole= 404.7 gramsH₂O: 3 moles ×18 g/mole= 54 gramsHClO₃: 5 moles ×84.45 g/mole= 422.25 gramsHCl: 1 mole ×36.45 g/mole= 36.45 grams

Mass of ClO₂ required

The following rule of three can be applied: If by reaction stoichiometry 422.25 grams of HClO₃ are formed from 404.7 grams of ClO₂, 50 grams of HClO₃ are formed from how much mass of ClO₂?

mass of ClO₂= (50 grams of HClO₃× 404.7 grams of ClO₂)÷ 422.25 grams of HClO₃

mass of ClO₂= 47.92 grams

Finally, 47.92 grams of ClO₂ is required.

Learn more about the reaction stoichiometry:

brainly.com/question/24741074

brainly.com/question/24653699

#SPJ1

1.a 1.80 l water sample is thought to contain cadmium ions. if 26.00 g cadmium phosphate (527.18 g/mol) precipitates when 77.1 ml of a 1.28 m sodium phosphate solution is added to the water sample, what is the molar concentration of cd2 in the original water sample?

Answers

In this particular problem, the molar concentration of cd2 in the original water sample 0.0822 M.

Explain how molar concentration comes 0.0822M

Considering:-

Normality= Molarity*n-factor

So, Given that:-

Molarity of Na3po4  = 1.28 M

n-factor of Na3po4  = 3

So,  

Normality of Na3po4 = 3*1.28 N = 3.84 N

Considering:-

At equivalence point

Gram equivalents of  Cd2+ = Gram equivalents of Na3po4

Given that:

Normality Na3po4 = 3.84N

VolumeNa3po4 = 77.1 ml

Volume cd2+ = 1800 ml

So,  

Normality cd2+ * 1800 = 3.84*77.1

Normality cd2+ = 296.064/ 1800 = 0.16448N

So,.

Molarity = Normality/ n-factor

           = 0.16448/ 2

           = 0. 0822M

To learn more about molar concentration.

https://brainly.com/question/21841645

#SPJ4

Other Questions
What position property value does CSS provide to position block-level elements? hi help me pls help help To maximize profit firms always work to produce whereA) the price is best suited to enable the company to thriveB) their marginal costs are at least equal to their marginal revenuesC) total revenue is equal to total costsD) their profits equal their revenues How did the fact of a largely illiterate anglo-saxon society affect entertainment during this time period? explain, citing text evidence to support your response. a person's blood pressure falls. which of the answer choices would you expect to occur? select all that apply. Predict the cost of a meal for a family of four between $50.00 and $100.00. Be sure to include dollars and cents.Part A: If the family has a 15%-off coupon, calculate the new price of the meal. Show all work or explain your steps. (2 points)Part B: Calculate a 20% tip using the new price. What is the final cost of the meal? Show all work or explain your steps. (2 points) for na -k pump, a) is it a primary or a secondary active transport system? b) how many na get transported out? how many k get transport in? c) how much energy is involved in one cycle of the transport? d) what is the main function of the pump? in an organization, office size and its placement communicates certain messages about the individual. this is an example of which of the following?a. Oral communicationb. Written communicationc. Nonverbal communicationd. Vertical communicatione. Horizontal communication 4The ratio of wordsmissed to correct Bon Marcy's spellingtest was 1:4. If shegot 4 words wrong,how many werecorrect?A6.RP.1: Ratio ConceptsCD481620 a rocket achieves a lift-off velocity of 500.0 m/s from rest in 30.0 seconds. calculate the average acceleration of the rocket. A scientist who studies the effects of algal blooms on crustaceans is mostlikely a(n):O A. geologist.O B. paleontologist.C. oceanographer.O D. climatologist. Kareen weigh 800N and it at a ditance of 4m from the pivot of a eeaw. Zaid weigh 1200N. Where hould zaid it to make ure the eeaw i balanced seror, a human resources manager at an advertising firm, is currently in the process of determining the value and worth of advertising executive positions within the agency. this is referred to as indicate the three shortcomings of hachure How do employers figure out how much federal income tax to withhold from your paycheck?. What was one effect of these actions on the United States?Question 5 options:The signing of the Treaty of Guadalupe HidalgoInternational criticism of the Monroe DoctrineThe expansion of manufacturingIncreased profits from international commerce How did the 54th Massachusetts regiment respond in protest to unequal pay during the Civil War?A. They refused to fight unless provided equal pay.B. They refused all pay until equal wages were paid.C. They deserted in large numbers. PYTHON: 4.2 Code Practice: Question 2Write a loop that continually asks the user what pets the user has until the user enters stop, in which case the loop ends. It should acknowledge the user in the following format. For the first pet, it should say You have one cat. Total # of Pets: 1 if they enter cat, and so on.Sample RunWhat pet do you have? lemurWhat pet do you have? parrotWhat pet do you have? catWhat pet do you have? stopSample OutputWhat pet do you have? lemurYou have one lemur. Total # of Pets: 1What pet do you have? parrotYou have one parrot. Total # of Pets: 2What pet do you have? catYou have one cat. Total # of Pets: 3What pet do you have? stop Kinetic energy depends on what?Mass and speedHeat and pressurePosition and heightDensity and volume what does futurist ray kurzweil call the point in history when artificial intelligence equals or surpasses human intelligence?