A 1,000 kg car sitting at a red light is hit from behind by a 1,200 kg car moving at 20 m/s. The two cars lock bumpers and continue to move forward. What is the velocity of the cars after the collision?

The wave speed in the second string is the same as in the first string because the tension and length are the same.

The wave speed in a string is determined by the tension and mass per unit length. In this case, the first string has a tension of t and a mass per unit length of m/l. The second string has a tension of 2t and a mass per unit length of 3m/l.

However, both strings have the same length l, so the only difference in their wave speeds comes from their mass per unit length. Since the mass per unit length is three times higher in the second string, it cancels out the effect of the higher tension. Therefore, the wave speed in the second string is the same as in the first string, which is v.

Learn more about tension here:

https://brainly.com/question/30037765

#SPJ11

To determine the velocities of the carts before and after a collision, the following experimental procedure can be used:

Materials Required:

Two carts with a motion sensor and a collision bumper

A computer with data analysis software installed (such as LoggerPro)

A meter stick or measuring tape

A flat surface to perform the experiment

Optional: additional masses to add to the carts for the collision

Procedure:

Set up the carts on the flat surface and ensure that the motion sensor and collision bumper are attached to each cart, facing each other. The carts should be aligned so that they will collide head-on.

Connect the motion sensor to the computer and open the data analysis software.

Place the meter stick or measuring tape on the ground parallel to the direction of the carts' motion.

Optional: If additional masses are being used, attach them to the carts to increase their mass and simulate an inelastic collision.

Start recording data in the data analysis software and release the carts simultaneously so that they collide head-on.

Stop recording data after the collision has occurred.

Use the data analysis software to calculate the velocities of the carts before and after the collision.

To calculate the velocity before the collision, measure the distance between the carts and divide it by the time it took for the carts to reach each other.

To calculate the velocity after the collision, measure the distance traveled by the carts after the collision and divide it by the time it took for the carts to come to a complete stop.

Repeat the experiment multiple times to ensure accuracy and reliability of the data.

Diagram:

   ^ motion sensor

   |

___|___

|       |

| cart  |

|   A   |

|_______|

|       |

| cart  |

|   B   |

|_______|

   |

 meter stick

In the diagram, Cart A and Cart B are placed facing each other with the motion sensor attached to one of the carts. The meter stick is placed parallel to the carts' direction of motion to measure the distance traveled.

Learn more about collision here:

https://brainly.com/question/30636941

#SPJ11

The toroidal solenoid has approximately 26 turns. Find ΔΦ/Δt by dividing the induced emf by the rate of change of current: (0.0126 V) / (dI/dt). Then, divide the flux (0.00285 Wb) by the result to find the number of turns, N.

We can use Faraday's Law of Induction which states that the magnitude of the induced emf is equal to the rate of change of magnetic flux through a surface. In this case, the surface is each turn of the toroidal solenoid. We are given that the magnitude of the induced emf is 12.6 mV and the rate of change of current is unknown. Therefore, we cannot solve for the number of turns directly. However, we are also given that when the current equals 1.40 A, the average flux through each turn is 0.00285 Wb.

We can use this information to solve for the rate of change of magnetic flux through a single turn. We know that the average flux through each turn is equal to the total flux divided by the number of turns. Therefore:
0.00285 Wb = total flux / number of turns
Solving for the total flux: total flux = 0.00285 Wb * number of turns
Now we can use Faraday's Law to relate the rate of change of magnetic flux to the induced emf: emf = -N * d(flux) / dt
where N is the number of turns, and d(flux)/dt is the rate of change of magnetic flux. The negative sign indicates that the induced emf opposes the change in magnetic flux. Plugging in the given values:
12.6 mV = -N * d(flux) / dt
d(flux) / dt = -(12.6 mV) / N
Now we can substitute the expression for total flux from above: d(flux) / dt = -0.00285 Wb * (12.6 mV) / (N * mV)
Simplifying:
d(flux) / dt = -0.03591 Wb/s / N
Setting this expression equal to the rate of change of current (which is unknown) and solving for N:
-0.03591 Wb/s / N = d(I) / dt
d(I) = (1.40 A) - (0 A) = 1.40 A
N = -0.03591 Wb/s / (1.40 A / s) = 25.65 turns

To know more about current visit :-

https://brainly.com/question/31297138

#SPJ11

The potential energy of the 500-N rock sitting 100 meters high atop a cliff in the Grand Canyon is 50,000 joules (J).

The potential energy (PE) of an object is given by the formula:

PE = mgh

where m is the mass of the object, g is the acceleration due to gravity, and h is the height of the object.

In this case, we are given that the rock has a weight (force due to gravity) of 500 N, which we can convert to mass (m) using the formula:

w = mg

where w is the weight and g is the acceleration due to gravity (9.81 m/s²). Solving for m, we get:

m = w / g

m = 500 N / 9.81 m/s²

m = 50.92 kg

Now we can use the formula for potential energy to find the PE of the rock:

PE = mgh

PE = (50.92 kg)(9.81 m/s²)(100 m)

PE = 50,000 J

Therefore, the potential energy of the 500-N rock sitting 100 meters high atop a cliff in the Grand Canyon is 50,000 joules (J).

Learn more about potential energy here:

https://brainly.com/question/24284560

#SPJ11

If a coherent light of wavelength 519 nm passes through two slits, the separation of the two slits is approximately 0.0604 mm.

To calculate the separation of the two slits in a double-slit interference pattern, we can use the equation for the fringe separation:

d * sinθ = m * λ

Where:

d is the separation of the slits,

θ is the angle of the bright fringe,

m is the order of the fringe, and

λ is the wavelength of the light.

In this case:

λ = 519 nm = 519 × 10⁻⁹ m,

m = 1 (assuming we're considering the first-order bright fringe),

θ = tan⁻¹(y / L), where y is the fringe separation and L is the distance to the screen.

Given that adjacent bright fringes are 4.00 mm apart (y = 4.00 mm = 4.00 × 10⁻³ m) and the screen is 4.6 m away (L = 4.6 m), we can calculate the angle θ:

θ = tan⁻¹(y / L) = tan⁻¹(4.00 × 10⁻³ / 4.6) ≈ 0.00087 rad

Now, substituting the values into the equation, we can solve for the separation of the slits (d):

d * sin(0.00087) = (1) * (519 × 10⁻⁹)

d = (519 × 10⁻⁹) / sin(0.00087)

d ≈ 0.0604 mm

Learn more about coherent light here:

https://brainly.com/question/30025910

#SPJ11

The time it takes for an inductor to discharge a certain percentage of its stored energy depends on its inductance and the resistance of the circuit.

In this case, we do not have the values of the inductance and resistance, so we cannot calculate the time precisely. However, we can use a formula that relates the time constant of the circuit (the product of the inductance and resistance) to the percentage of energy remaining in the inductor after a certain time. This formula is:

E(t) = E(0) * exp(-t/τ)

where E(t) is the energy remaining in the inductor after time t, E(0) is the initial energy stored in the inductor, τ is the time constant of the circuit (L/R), and exp is the exponential function.

If we want to find the time it takes for the inductor to discharge 25% of its stored energy, we can set E(t) = 0.25*E(0) and solve for t. This gives:

t = -τ * ln(0.25)

The natural logarithm of 0.25 is -1.39, so we can simplify the equation to:

t = 1.39 * τ

Since we do not have the values of L and R, we cannot calculate the time constant τ or the exact time it takes for the inductor to discharge 25% of its energy. However, we can see that the answer choices range from 0.25 s to 2.4 s, which suggests that the time constant and/or the resistance of the circuit are relatively small. If we assume a typical value for the time constant of an inductor circuit (e.g. τ = 0.1 s), we can estimate that the answer is likely to be around 0.14 s (i.e. 1.39 * 0.1). This is closest to answer (a) 0.25 s, but we cannot be certain without more information.

to know more about exponential function. click this link

brainly.com/question/29287497

#SPJ11

The magnitude of the magnetic field at the same point and instant is approximately 1.067 x 10^-8 T. To determine the magnitude of the magnetic field at this point in space and time, we need to know the frequency of the wave.

This is because the electric and magnetic fields of an electromagnetic wave are interrelated through the speed of light and the frequency of the wave. Specifically, the magnitude of the magnetic field is equal to the magnitude of the electric field divided by the speed of light multiplied by the frequency of the wave.
To find the magnitude of the magnetic field (B) at the same point in space and instant in time, we can use the relationship between the electric field (E) and magnetic field in an electromagnetic wave. The relationship is given by the equation: B = E/c, where c is the speed of light (approximately 3.00 x 10^8 m/s). Given the electric field E = 3.20 V/m, the magnetic field magnitude can be calculated as:

B = (3.20 V/m) / (3.00 x 10^8 m/s) ≈ 1.067 x 10^-8 T (tesla).

So, the magnitude of the magnetic field at the same point and instant is approximately 1.067 x 10^-8 T.

To know about electric :

https://brainly.com/question/31173598

#SPJ11

At 29° angle from its original direction is the larger asteroid deflected.

Given:

[tex]m_{1} = 1.0 * 10^{5} kg[/tex], [tex]V_{1ix}[/tex] = 100 m/s cos 40, [tex]V_{1iy}[/tex] = 100 m/s sin 40

[tex]m_{2} = 2.0 * 10^{5} kg[/tex], [tex]V_{2ix}[/tex] = 20 m/s, [tex]V_{2iy}[/tex] = 0, Фf = ?

x-component: [tex](1.0 * 10^{5} kg)[/tex] (100 m/s cos 40) + [tex](2.0 * 10^{5} kg)[/tex] (20 m/s) = [tex](3.0 * 10^{5} kg) V_{fx}[/tex]

[tex]V_{fx} = 38.868 m/s[/tex]

y- component: [tex](1.0 * 10^{5} kg)[/tex] (100 m/s sin 40) + 0 = [tex](3.0 * 10^{5} kg)V_{fy}[/tex]

[tex]V_{fy} = 21.426 m/s[/tex]

tan Ф = [tex]\frac{V_{fy} }{V_{fx} }[/tex]

Ф = [tex]tan^{-1} (\frac{V_{fy} }{V_{fx} } )[/tex]

Ф = [tex]\frac{21.426}{38.868}[/tex]

Ф = 28.9 ≅ 29°

In an inelastic collision, as opposed to an elastic impact, internal friction prevents the conservation of kinetic energy. In collisions between macroscopic objects, some of the kinetic energy is converted into atomic vibrational energy, which results in heating and deformation of the objects.

A collision that results in a loss of kinetic energy is said to be inelastic. In an inelastic collision, the system's kinetic energy is not preserved, but its momentum is. This occurs as a result of the transfer of some kinetic energy to something else.

Learn more about inelastic collision:

https://brainly.com/question/4322828

#SPJ4

The complete question is:

Two asteroids are drifting in space with trajectories shown. assuming the collision at point 0 between them is completely inelastic, at what angle from its original direction is the larger asteroid deflected?

The correct option is A, Original direction is the larger asteroid deflected is 80° above the +x axis.

mass of smaller asteroid = m1= 0.10

the initial speed of a smaller asteroid = u1= 45m/s

positive y-axis then u1x = u1(sin47) = = 45(sin47) = 32.9 m/s

                                u1y = 45(cos47) = 30.7 m/s

so common velocity along the x direction= [tex]\frac{m_1u_1x+ m_2u_2x}{m1+m2}[/tex] = [tex]\frac{(0.10m)(32.9m/s)+0}{0.10m+m}[/tex]

                                                                 = [tex]\frac{(0.10m)(32.9m/s)}{1.10m} = 2.99m/s[/tex]

so common velocity along the y direction= [tex]\frac{m_1u_1y+ m_2u_2y}{m1+m2}[/tex] = [tex]\frac{(0.10m)(30.7m/s)+(m)(15m/s)}{1.10m}[/tex] = [tex]\frac{m(18.1)}{1.10} = 16.43m/s\\[/tex]

The magnitude of the common speed of the asteroids= [tex]v= \sqrt{v_x^2+v_y^2} \\v= \sqrt{(2.99m/s)^2+(16.43m/s)^2} \\v= 16.7m/s[/tex]

Direction of [tex]\alpha = tan^{-1}(\frac{v_x}{v_y} )[/tex]

[tex]= tan^{-1}(\frac{16.43m/s}{2.99m/s} )[/tex]

= 80° above the +x axis.

An asteroid is a small, rocky body that orbits the sun. Most asteroids are found in the asteroid belt, a region between Mars and Jupiter, but some can also be found in other parts of the solar system. Asteroids vary in size from less than a meter to several hundred kilometers in diameter. They are believed to be remnants from the early solar system, leftover material that never formed into a planet.

Asteroids can pose a potential threat to Earth if they collide with our planet. The impact of a large asteroid could cause widespread destruction and even mass extinction. Scientists study asteroids to better understand their composition and behavior, and to develop strategies to deflect them if necessary. In recent years, several missions have been sent to study asteroids up close, including NASA's OSIRIS-REx mission to asteroid Bennu and Japan's Hayabusa2 mission to asteroid Ryugu.

To know more about Asteroid refer to-

brainly.com/question/14101941

#SPJ4

The force represented by -7N is the force of friction. So, the correct answer is force of friction (Option A).

Friction is a force that opposes the motion of an object when it is in contact with a surface. In this scenario, the person is pushing the box across a table, which means the box is in contact with the surface of the table. As a result, there will be a force of friction acting on the box in the opposite direction to the push force applied by the person.
The normal force is the force that a surface exerts on an object in contact with it, perpendicular to the surface. In this case, the normal force is equal to the weight of the box, which is balanced by the force of gravity pulling the box downwards.
The force of gravity is the force that pulls an object towards the center of the earth. It is proportional to the mass of the object and the acceleration due to gravity. In this case, the force of gravity is acting on the box, but it is not one of the measured forces on the box.
Finally, the push force is the force that the person is applying to the box to move it across the table. This force is measured as 10N and 14N in this scenario.
Therefore, the force represented by -7N is the force of friction. It is acting in the opposite direction to the push force and is causing the box to slow down or resist the motion.

for more such question on force of friction

https://brainly.com/question/29619303

#SPJ11

Stars that tend to be found along spiral arms in the Milky Way and other similar galaxies are typically young, massive, and hot stars.

These stars are classified as O and B type stars, and are characterized by their blue color and high luminosity. O and B type stars have short lifetimes of a few million years, compared to the billions of years for stars like our Sun, so they are typically found in areas of active star formation, such as spiral arms.

These areas are rich in gas and dust, which are the raw materials needed to form new stars. As these stars age, they may migrate away from the spiral arms, where the gas and dust is less dense and new star formation is less likely.

To know more about spiral arms, refer here:

https://brainly.com/question/1589435#

#SPJ11

Two limitation of using a forced pump are; Limited lifting height and Inefficiency at low flow rates.

A force pump can only raise water to a certain height. If the desired lifting height goes about its maximum, the pump will not be able to lift efficiently.

A force pump does not work well at low flow rates because energy is lost as a result of friction within the pump's components and pipes.

This energy loss increases as the flow rate decreases, resulting in reduced pumping efficiency and increased energy consumption.

Find more exercises on force pump;

https://brainly.com/question/30601149

#SPJ1

The electric field inside a conducting sphere that contains an enclosed charge of magnitude depends on the distribution of charge on the surface of the sphere. When a conducting sphere is charged, the excess charge resides on the surface of the sphere and creates an electric field in the surrounding space.

This electric field inside the sphere is zero because charges inside the conductor repel each other and move to the surface of the sphere until the electric field inside the sphere becomes zero. Therefore, the electric field inside the sphere is zero irrespective of the magnitude of the enclosed charge. However, if there is a non-conducting material inside the sphere, then the electric field inside the sphere will be non-zero and will depend on the distribution of charge on the surface of the sphere and the magnitude of the enclosed charge. This is because the non-conducting material cannot redistribute the charges on its surface in the same way as a conductor, leading to a non-zero electric field inside the sphere.

to know more about electric field visit:

https://brainly.com/question/30544719

#SPJ11

When an enclosed charge is placed inside a conducting sphere, the electric field inside the sphere will always be zero. This is due to the nature of conductors, which are materials that allow charges to move freely.

When a charge is placed inside a conductor, the charges on the surface of the conductor will redistribute themselves in such a way that the electric field inside the conductor cancels out. This phenomenon is known as electrostatic shielding. Therefore, regardless of the magnitude of the enclosed charge, the electric field inside the conducting sphere will always be zero. This property makes conductors useful in applications such as Faraday cages and electromagnetic shielding.
The electric field inside a conducting sphere containing an enclosed charge of magnitude can be explained using the concepts of electrostatics. For a conducting sphere, the charges reside on its surface and distribute themselves evenly to minimize the electric potential energy. According to Gauss's Law, the electric field inside a conductor is always zero. This occurs because the charges within the conductor rearrange to cancel out any electric field created by the enclosed charge. So, regardless of the magnitude of the enclosed charge, the electric field inside a conducting sphere will always be zero.

To know about conductors :

https://brainly.com/question/14405035

#SPJ11

The Paschen series is a spectral series of hydrogen-like atoms that is similar to the Balmer series, but with a different value of the principal quantum number.

Specifically, the Paschen series corresponds to transitions between an excited state with principal quantum number n greater than or equal to 3, and the n=3 energy level in hydrogen-like atoms.

Like the Balmer series, the Paschen series also produces a series of spectral lines, which are the result of the emission of electromagnetic radiation as the electrons in the atom transition from higher energy levels to lower energy levels.

However, the wavelengths of the spectral lines in the Paschen series are longer than those in the Balmer series, due to the higher energy levels involved.

Overall, the Paschen series is an important aspect of the study of atomic physics, and provides valuable insights into the behavior of hydrogen-like atoms and their spectral emissions.

To know more about Paschen refer here

brainly.com/question/29376664#

#SPJ11

The statement "the sun rises in the east, crosses the sky, and sets in the west" is a simplified way of describing the apparent motion of the sun as seen from the Earth.

It is not literally true since the sun does not actually rise or set; it appears to do so due to the Earth's rotation on its axis.

As the Earth rotates from west to east, the sun appears to rise in the east and move across the sky, reaching its highest point at noon. Then, as the Earth continues to rotate, the sun appears to move toward the western horizon, eventually disappearing from view. This apparent motion of the sun is caused by the rotation of the Earth, not the movement of the sun itself.

In reality, the sun is stationary at the center of the solar system, and the Earth and other planets revolve around it. However, the apparent motion of the sun as seen from Earth can be a useful way of describing the movement of the celestial bodies in the sky.

Learn more about sun here:

https://brainly.com/question/31110366

#SPJ11

When objects 1 and 2 are connected by a tight rope, their accelerations are interrelated. If the rope remains taut and the system is considered in isolation, then the net force acting on the entire system must be equal. Consequently, the accelerations of both objects (a1 and a2) are determined by the ratio of their respective masses (m1 and m2) and the external forces acting on them.

In this scenario, if a larger force is acting on object 1 compared to object 2, the acceleration magnitude a1 will be greater than a2. Conversely, if a larger force is acting on object 2, the acceleration magnitude a2 will be greater than a1. However, if the external forces acting on both objects are equal, then the acceleration magnitudes a1 and a2 will also be equal.

To summarize, the relationship between the acceleration magnitudes a1 and a2 depends on the external forces acting on the objects and their respective masses. By analyzing the forces and mass ratios, one can determine which object will have a greater acceleration magnitude or if they will be equal.

to know more about acceleration click this link

brainly.com/question/2303856

#SPJ11

The gravitational constant G is a fundamental constant of nature that appears in the law of gravitation proposed by Sir Isaac Newton, which states that every particle of matter in the universe attracts every other particle with a force that is directly proportional to the product of their masses and inversely proportional to the square of the distance between them.

The proportionality constant in this law is the gravitational constant G.The value of G is approximately 6.674 × 10^-11 N·m^2/kg^2 in standard units, which is a very small value. This small value tells us that gravitational forces between ordinary objects are very weak compared to other fundamental forces, such as electromagnetic forces or nuclear forces. For example, the gravitational force between two electrons is about 10^-40 times weaker than the electromagnetic force between them.

However, even though gravitational forces are weak on a small scale, they become important on a larger scale, such as between planets, stars, and galaxies. The large masses involved make the gravitational forces significant, and they govern the motion and structure of the universe on a cosmic scale.

Learn more about gravitation here:

https://brainly.com/question/3009841

#SPJ11

Based on the measurements, the maximum height reached by the puck in trial 6 is determined as 5.1 m.

The maximum height reached by the puck is calculated by applying the principle of conservation of energy as shown below;

From the trials, the puck was thrown upwards with initial velocity of 10 m/s and the mass of the puck is given as 400 g.

With these values we can predict the maximum height the puck will reach by applying the principle of conservation of energy.

Potential energy of the puck at maximum height = Kinetic energy of the puck at minimum height

P.E = K.E

mgh = ¹/₂ mv²

h = ¹/₂ (v² / g )

where;

The maximum height reached by the puck is calculated as follows;

h =  ¹/₂ (10² / 9.8 )

h = 5.1 m

Learn more about maximum height here: https://brainly.com/question/12446886

#SPJ1

the package will travel a horizontal distance of 1500 m/sec x 10.1 sec = 15,150 meters before hitting the ground. Assuming there is no air resistance, the package will travel horizontally at the same speed as the airplane, which is 1500 m/sec. The time it takes for the package to hit the ground can be calculated using the formula t = √(2h/g), where h is the initial height (500 m) and g is the acceleration due to gravity (9.8 m/s²). t = √(2(500)/9.8) = √102.04 ≈ 10.1 sec


To determine how far the package travels horizontally before hitting the ground, we need to find the time it takes for the package to fall 500 meters vertically and then use that time to calculate the horizontal distance traveled.
Step 1: Find the time it takes for the package to fall.
We'll use the free fall equation: h = 0.5 * g * t^2, where h is the height, g is the acceleration due to gravity (approximately 9.8 m/s^2), and t is the time.
500 = 0.5 * 9.8 * t^2
Solve for t:
t^2 = (500 * 2) / 9.8
t^2 ≈ 102.04
t ≈ √102.04
t ≈ 10.1 seconds
Step 2: Calculate the horizontal distance traveled.
Since the airplane is flying horizontally at 1500 m/s, we can multiply its speed by the time it takes for the package to fall:
Horizontal distance = speed * time
Horizontal distance = 1500 m/s * 10.1 s
Horizontal distance ≈ 15,150 meters
The package travels approximately 15,150 meters horizontally before hitting the ground.

To know more about Distance Visit:

https://brainly.com/question/15256256

#SPJ11

A doubly charged ion with velocity 6.9 × 10^6 m/s moves in a circular path of diameter 60.0 cm in a magnetic field of 0.80 T in a mass spectrometer, thus the mass of the doubly charged ion is 6.7 × 10-27 kg.


The equation for the radius of a circular path for a charged particle in a magnetic field is r = mv / Be, where m is the mass of the particle, v is its velocity, B is the magnetic field strength, and e is the charge of the particle. Solving for the mass, we get m = (rBe) / v.

Plugging in the given values, we get m = (0.3*0.8*2*1.60 × 10-19) / (6.9 × 106) = 6.7 × 10-27 kg. The correct answer is B. It's worth noting that we don't need to use the charge of the ion (2e) in this calculation since it cancels out when we solve for the mass.

Learn more about magnetic field here:

https://brainly.com/question/19542022

#SPJ11

The type of sensor commonly used to measure the force of a hand grip or pinch is called a force sensor or load cell. These sensors convert mechanical force into an electrical signal that can be measured and analyzed. They can be placed within a hand grip device or attached to a surface where the force is being applied, such as a pinch gauge.

Some common types of force sensors used for hand grip and pinch measurement include strain gauges, piezoelectric sensors, and capacitive sensors.
A common type of sensor used to measure the force of a hand grip or pinch is a "force-sensitive resistor" (FSR). This sensor detects changes in resistance based on the pressure applied to it, allowing it to quantify the force exerted during a hand grip or pinch action.

To know more about force sensor visit:

https://brainly.com/question/28906632

#SPJ11

The work required to gradually increase the total charge on the sphere from 0 to Q is ∫(0→Q) (Kq/R)dq. So, the correct option is C.

The magnitude of the potential point per unit charge is the electric potential at a specific point.

The amount of work required to move a unit positive charge from infinity to a certain position is referred to as the electric potential at that point.

The potential of the isolated conducting sphere is given by,

V = Kq/R

Work done can be defined as the product of the potential and the charge.

The work required to gradually increase the total charge on the sphere from 0 to Q is,

W =∫(0→Q) Vdq

W = ∫(0→Q) (Kq/R)dq

To learn more about potential, click:

https://brainly.com/question/4305583

#SPJ1

The excess charge of a sphere can be determined using the formula Q = ne, where Q is the charge, n is the number of excess electrons, and e is the charge of an electron. In this case, the net excess charge of the sphere is -4.8x10^-19 C, which means that there is an excess of 4.8x10^(-19)/1.6x10^(-19) = 3 electrons.

The charge of the sphere is negative, which means that it has gained electrons and has an excess of negative charge. The magnitude of the charge is small, indicating that the sphere is not highly charged.

It is important to note that excess charge on a sphere can affect its electric field and interactions with other charged objects. The distance between charged objects, the magnitude of their charges, and the medium between them can all play a role in determining the strength and direction of the electric forces between them.

To Learn more about sphere Click this!

brainly.com/question/19130315

#SPJ11

a. The orbital velocity of the satellite is approximately 29.78 m/s.

b. The orbital speed of the satellite is approximately 29.78 m/s.

c.  The gravitational force experienced by the satellite is approximately [tex]1.995 * 10^{-9[/tex] N.  

(a) To solve for the orbital period (T), we can use the equation:

T = 2 * π * r/v

where r is the radius of the orbit, v is the orbital velocity, and π is the mathematical constant pi (approximately 3.14159).

Given that the height of the satellite above the surface of the Earth is equal to the Earth's mean radius, we can substitute this value into the equation above:

T = 2 * π * (6.38 * [tex]10^6[/tex] m)/(v)

where v is the orbital velocity.

The orbital velocity can be calculated using the equation:

v = √(GM/r)

v = √[tex]\sqrt{(6.674 * 10^{-11} N m^2/kg^2 * 5.97 * 10^{24} kg / (6.38 * 10^6 m))}[/tex]

= 29.78 m/s

Therefore, the orbital velocity of the satellite is approximately 29.78 m/s.

(b) To solve for the orbital speed of the satellite, we can use the equation:

v = [tex]\sqrt{(GM/r)}[/tex]

the values for G, M, and r, we get:

v = [tex](6.674 * 10^{-11} N m^2/kg^2 * 5.97 * 10^{24} kg / (6.38 * 10^6 m))[/tex]

= 29.78 m/s

Therefore, the orbital speed of the satellite is approximately 29.78 m/s.

(c) To solve for the gravitational force experienced by the satellite, we can use the equation:

F = [tex]G * (M_s / r^2)[/tex]

Substituting the values for G, M_s, and r, we get:

F =[tex]6.674 * 10^{-11} N m^2/kg^2 * (430 kg / (6.38 * 10^6 m)^2)[/tex]

= [tex]1.995 * 10^{-9[/tex] N.  

Therefore, the gravitational force experienced by the satellite is approximately [tex]1.995 * 10^{-9[/tex] N.

Learn more about orbital speed visit: brainly.com/question/22247460

#SPJ4

During the collision, A. Yes; no external net force is applied during the collision.

In the given scenario, the two bowling balls collide with each other. If no external net force is applied during the collision, then momentum is conserved in the two-ball system.

The conservation of momentum means that the total momentum before the collision is equal to the total momentum after the collision. Kinetic energy, on the other hand, may not be conserved during the collision.

Therefore, the correct answer is:

A. Yes; no external net force is applied during the collision.

Find out more on momentum here: https://brainly.com/question/7538238

#SPJ1

The statement is incomplete and incorrect. A simple telescope does work by using two lenses - an objective lens and an eyepiece. The objective lens forms a real and inverted image of the distant object at its focal point.

The eyepiece is then used to magnify this image and bring it closer to the eye.

However, the final image produced by the telescope is not necessarily closer to the eye but rather larger in size. This larger image is what allows the eye to see more details and magnification. Therefore, the statement should be revised as: "Like a microscope, a simple telescope works by having one positive lens use the image from the other positive lens as its object. However, in a telescope, the final image is not closer but rather larger in size. This allows for the eye to see the image in more detail, providing magnification."

Learn more about lenses -here:

https://brainly.com/question/30469516

#SPJ11

There are several factors that can lead to a force that pushes people out of their native lands and pulls them toward a new place.

One of the most common reasons is economic pressure, which can be caused by poverty, unemployment, and lack of opportunities in their home country. Political instability, war, and conflict can also force people to flee their homes and seek safety in another country. Climate change and natural disasters can also lead to displacement, as people are forced to leave their homes due to environmental factors such as drought, floods, and hurricanes. Another force that can push people to leave their homes is social and cultural factors such as discrimination, persecution, and human rights violations. On the other hand, pull factors such as better economic opportunities, political stability, and better living conditions in another country can also attract people to move. Ultimately, the force that pushes people out of their native lands and pulls them toward a new place is a complex combination of social, economic, political, and environmental factors.

To know more about force visit:

https://brainly.com/question/30507236

#SPJ11

You can arrange a stack of blocks so that the topmost block is not immediately over the table, yes. A stack like this is said to be overhanging.

To create an overhanging stack, the blocks need to be stacked in a way that distributes the weight in such a manner that the center of gravity remains over the lower blocks, even though the uppermost block may be protruding out over the edge. This requires careful consideration of the size, shape, and weight of each block in the stack, as well as the angle at which they are stacked.

One way to create an overhanging stack is by using tapered blocks, which are narrower at the top than they are at the bottom. By stacking these blocks in a slightly tilted position, with the wider bottom of each block positioned over the narrower top of the block below it, it is possible to create a stable overhanging stack.

Another way to create an overhanging stack is by using cantilevered blocks, which are designed to be supported at only one end. These blocks can be positioned so that one end is supported by the stack below, while the other end protrudes out over the edge of the table.

To learn more about overhanging stack

https://brainly.com/question/32152800

#SPJ4