"A 100.0 mL sample of 0.10 M NH 3 is titrated with 0.10 M HNO 3. Determine the pH of the solution after the addition of 200.0 mL of HNO 3. The K b of NH 3 is 1.8 × 10^ -5.
12.52
1.48
6.44
12.00
2.00"

Answers

Answer 1

The appropriate values into the Henderson-Hasselbalch equation, pH = 1.48

What is Henderson-Hasselbalch?

The Henderson-Hasselbalch equation is a fundamental tool used in biochemistry to calculate the pH of a solution. It is used to describe the relationship between the acid dissociation constant (Kₐ), the concentration of the acid (H⁺), and the concentration of its conjugate base (A⁻). The equation is written as pH = pKₐ + log([A-]/[H+]). It is an important equation used to calculate the pH of a buffer solution, which is a solution that resists changes in pH when small amounts of acid or base are added. By manipulating the equation, it is also possible to calculate the concentrations of each species needed to create a buffer of a specific pH.

pH = pKb + log ( [NH₃] / [HNO₃] )
Substituting the appropriate values into the Henderson-Hasselbalch equation, we get:
pH = -log ( 1.8 × 10⁻⁵ ) + log ( 0.10 / 0.20 )
pH = -log ( 1.8 × 10⁻⁵ ) - log (2)
pH = -log ( 1.8 × 10⁻⁵ ) - 0.3010
pH = -log ( 1.8 × 10⁻⁵ ) - 0.3010
pH = 1.48

To learn more about Henderson-Hasselbalch
https://brainly.com/question/13423434
#SPJ4


Related Questions

"Calculate the pH of a buffer that is 0.060 M HF and 0.030 M KF. The K a for HF is 3.5 × 10^ -4.
3.56
3.16
3.76
2.06
4.86"

Answers

The pH of the buffer is 3.16.  The pKa is a measure of the acidity or basicity of the buffer components and is related to the dissociation constant (Ka) of the weak acid or base.

What is Buffer Solution?

A buffer solution is a solution that resists changes in pH when small amounts of an acid or a base are added to it. Buffer solutions are made by mixing a weak acid and its conjugate base, or a weak base and its conjugate acid, in approximately equal amounts. Buffers are important in many chemical and biological processes, where pH control is essential for maintaining proper function.

where pK a is the negative logarithm of the acid dissociation constant, [base] is the concentration of the conjugate base (in this case, F-) and [acid] is the concentration of the weak acid (in this case, HF).

We are given the concentrations of HF and KF, so we can calculate the concentration of F-:

[F-] = 0.030 M KF

Next, we can calculate the dissociation constant for HF:

[H+] = 3.5 × [tex]10^{-4}[/tex] x 0.060 M / 0.030 M

[H+] = 7.0 × [tex]10^{-4}[/tex] M

Finally, we can use the pH equation:

pH = pK a + log([base]/[acid])

pH = -log(3.5 × [tex]10^{-4}[/tex]) + log(0.030 M / 0.060 M)

pH = 3.16

Therefore, the pH of the buffer is 3.16.

Learn more about Buffer Solution from the given link

https://brainly.com/question/8676275

#SPJ4

Which statement best describes the direction of heat flow by conduction between two samples of the same material?.

Answers

The direction of heat flow by conduction between two samples of the same material is from the sample with higher temperature to the sample with lower temperature.

Heat flow by conduction between two samples of the same material occurs from the hotter sample to the cooler sample. This is because heat energy is transferred from areas of higher temperature to areas of lower temperature. if two samples of the same material are at different temperatures, heat will flow from the hotter sample to the cooler sample until both samples reach the same temperature and thermal equilibrium is established.

what is temperature?

Temperature is a measure of the average kinetic energy of the particles (atoms or molecules) in a substance. It is a physical quantity that is commonly used to describe the hotness or coldness of an object, and is measured using various temperature scales such as Celsius, Fahrenheit, and Kelvin. When two objects are in contact and at different temperatures, heat flows from the hotter object to the colder object until they reach thermal equilibrium, i.e. they have the same temperature.

To learn more about kinetic energy visit:

brainly.com/question/26472013

#SPJ11

a substance is insoluble in water at low temperatures but becomes soluble at higher temperatures. which pec diagram best explains the solubility of this substance in water? m

Answers

The pec diagram that best explains the solubility of a substance in water that is insoluble at low temperatures but becomes soluble at higher temperatures is a diagram that shows an upward curve.

A pec diagram represents the solubility of a substance in water at different temperatures and pressures. The upward curve on the diagram represents an increase in solubility as the temperature increases. This indicates that the substance becomes more soluble in water at higher temperatures.

Therefore, the best pec diagram to explain the solubility of a substance that is insoluble at low temperatures but becomes soluble at higher temperatures is the diagram that shows an upward curve.

To know more about solubility, visit;

https://brainly.com/question/9098308

#SPJ11

during an endothermic chemical reaction, four moles of gaseous reactants are turned into two moles of gaseous products.
T/F

Answers

False. An endothermic reaction is one in which energy is absorbed from the surroundings. Therefore, the number of moles of reactants and products can vary.

What is reaction?

Reaction is the act of responding to any type of stimulus, such as a touch, taste, sight, sound, or thought. It can also refer to the process of responding to a particular situation or event. Reaction is an important part of communication, as it helps people understand each other. It can also be used to describe the actions people take in response to certain situations. Reaction can be physical, verbal, or emotional. For instance, when someone experiences a negative emotion, they may react with anger, sadness, or fear. On the other hand, when someone experiences a positive emotion, they may react with joy, enthusiasm, or satisfaction. Reactions can also be based on a person's beliefs and values.

To learn more about reaction

https://brainly.com/question/25769000

#SPJ4

An antacid tablet reacts in water, creating bubbles. Which best describes the products of the reaction?a. a clear gasb. a white solidc. a clear liquid and clear gasd. a clear liquid

Answers

An antacid tablet reacts in water, creating bubbles with clear liquid and clear gas.

The reaction of the antacid tablet with water produces a clear liquid (water) and a clear gas (most likely carbon dioxide). The bubbles that are observed are a result of the release of this gas during the reaction.

When an antacid tablet is added to water, a chemical reaction takes place between the active ingredients in the tablet and the water. The most common active ingredients in antacid tablets are bases, such as calcium carbonate, magnesium hydroxide, and sodium bicarbonate. When these bases react with the acid in the stomach, they neutralize it, relieving symptoms of heartburn and indigestion.

Therefore, based on the information given, option c is the best answer.

To learn about the chemical reaction:

https://brainly.com/question/11151455

#SPJ4

Using StatCrunch and the appropriate rounding rules, find the sample mean of the Red blood cell count (cells/mcL)
Column n Mean Variance Std. dev. Std. err. Median Range Min Max Q1 Q3
Red blood cell count (cells/mcL) 27 7.8637037 2.000255 1.4143037 0.27218288 7.79 7.8 6.7 14.5 7.23 7.95

Answers

The sample mean of the Red blood cell count (cells/mcL) is 7.86 x 10⁶.

What is the sample mean of the Red blood cell count (cells/mcL)?

The sample mean represents the average value of the Red blood cell count (cells/mcL) in the given sample. It provides a measure of the central tendency of the data.

To calculate the sample mean of the Red blood cell count (cells/mcL), we sum up all the individual values in the sample and divide the sum by the sample size.

Given data:

Sample size (n) = 27

Red blood cell count values (cells/mcL):

7.79, 7.8, 6.7, 14.5, 7.23, 7.95, ...

To find the sample mean, we add up all the values and divide by the sample size:

Sum of Red blood cell count values = 7.79 + 7.8 + 6.7 + 14.5 + 7.23 + 7.95 + ...

Sample mean = Sum of Red blood cell count values / Sample size

Since the provided data has many values, the calculation can be time-consuming to perform manually. Utilizing a statistical software tool like StatCrunch can simplify this process by automating the calculations.

Using StatCrunch or similar software, the sample mean of the Red blood cell count can be directly computed as 7.8637037 x 10⁶ cells/mcL.

Therefore, the answer is 7.86 x 10⁶.

To learn more about Red blood cell, visit:
https://brainly.com/question/15301863
#SPJ4

a hypothetical element x has 3 naturally occurring isotopes; x-40, x-41 and x-42. their abundances are 72.0%, 9.00%, and 19.0% respectively. what is the atomic mass of x?

Answers

Therefore, the atomic mass of element x is approximately 40.47. It is important to note that this is a hypothetical element and may not actually exist in nature.

To find the atomic mass of element x, we need to first calculate the weighted average of the atomic masses of its isotopes, taking into account their respective abundances. We can use the following formula:
atomic mass of x = (% abundance of x-40 × atomic mass of x-40) + (% abundance of x-41 × atomic mass of x-41) + (% abundance of x-42 × atomic mass of x-42)
Plugging in the given values, we get:
atomic mass of x = (0.720 × 40) + (0.090 × 41) + (0.190 × 42)
atomic mass of x = 28.8 + 3.69 + 7.98
atomic mass of x = 40.47

To know more about atomic mass visit:
https://brainly.com/question/17067547

#SPJ11

which best describes elements found in a column of the periodic table? group of answer choices the elements are all found naturally in the same physical state. the elements have similar chemical properties. the elements have the same atomic number. the elements have the same-size atoms.

Answers

The best description of elements found in a column of the periodic table is that they have similar chemical properties. The elements in a column or group of the periodic table share the same number of valence electrons, which are responsible for the chemical behavior of the element.

This similarity in electron configuration leads to similar chemical properties, such as reactivity, electronegativity, and ionization energy. However, the elements in a column do not necessarily have the same atomic number or the same size atoms. In fact, the atomic size tends to increase as you go down a column due to the addition of more electron shells. Therefore, it is the similar electron configuration and resulting chemical behavior that define the elements in a column of the periodic table.

To know more about physical state visit:

https://brainly.com/question/29638464

#SPJ11

Describe how to carry out chemical tests to identify the precense of proteins, carbohydrates and lipids

Answers

Proteins: Identify the presence of proteins, the most common test is the Biuret Test. Carbohydrates: To identify the presence of carbohydrates, the most common test is the Benedict’s Test. Lipids: To identify the presence of lipids, the most common test is the Sudan III Test.

What is proteins?

Proteins are large molecules made up of amino acids that are essential for life. They are the main components of cells and are used to build and repair body tissue. They are also used to make hormones, enzymes, and antibodies.

To perform the test, a sample of the substance is mixed with a few drops of copper sulfate solution. If the presence of proteins is detected, the mixture will turn a deep purple or blue color.

Carbohydrates: To identify the presence of carbohydrates, the most common test is the Benedict’s Test. This test is based on the reaction of carbohydrates with Benedict’s solution, which is an alkaline-copper sulfate solution. To perform the test, a sample of the substance is mixed with Benedict’s solution. If the presence of carbohydrates is detected, the mixture will turn a light orange or yellow color.

Lipids: To identify the presence of lipids, the most common test is the Sudan III Test. This test is based on the reaction of lipids with Sudan III, which is an orange-red dye. To perform the test, a sample of the substance is mixed with a few drops of Sudan III solution. If the presence of lipids is detected, the mixture will turn a deep red or pink color.

To learn more about proteins

https://brainly.com/question/29633638

#SPJ4

to what ph should you adjust a standard hydrogen electrode to get an electrode potential of -0.121 v ? (assume that the partial pressure of hydrogen gas remains at 1 atm .)

Answers

The pH must be adjusted to -2.049 in order to get an electrode potential of -0.121 V when the partial pressure of hydrogen gas remains at 1 atm.

What is electrode?

An electrode is an electrical conductor used to make contact with a nonmetallic part of a circuit. It is used to make electrical connections, transmit electrical current, and measure electric potential. Electrodes are made from a variety of materials including metals, graphite, and plastics. They are used in many different applications, including welding, electrical engineering, energy storage, electroplating, and electrochemical processes.

The standard hydrogen electrode (SHE) is an electrode with a potential of 0 V when it is at a pH of 0.
This means that in order to get an electrode potential of -0.121 V, the pH must be adjusted to -0.121 V/ 59.16 mV/pH
= -2.049.
Therefore, the pH must be adjusted to -2.049 in order to get an electrode potential of -0.121 V when the partial pressure of hydrogen gas remains at 1 atm.


To learn more about electrode
https://brainly.com/question/30561781
#SPJ4

a sample of copper is heated to 110.0c. it is placed into 44.0g of water at 25.0c. if the final temperature of the water is 36.0c, what was the mass of the copper that was heated?

Answers

When, a sample of copper is heated to 110.0c. It is placed into 44.0g of water at 25.0c. if the final temperature of the water will be 36.0c. Then, the  mass of the copper that was heated is 478.8 g.

We can use the heat gained by the water to determine the heat lost by the copper. The heat gained or lost can be calculated using the equation;

q = mcΔT

where q is heat gained or lost, m is the mass, c is specific heat capacity, and ΔT is change in temperature.

Assuming the copper starts at the same temperature as the initial temperature of the water, the heat lost by the copper can be calculated as;

q_copper = mcΔT = (m_copper)(c_copper)(T_final - T_initial)

where c_copper is specific heat capacity of copper, T_final is final temperature of the water and copper, and T_initial is initial temperature of the water and copper.

The heat gained by the water can be calculated as;

q_water = mcΔT = (m_water)(c_water)(T_final - T_initial)

where c_water is specific heat capacity of water, m_water is mass of water, and T_final and T_initial are the final and initial temperatures of the water, respectively.

Since the total heat lost by the copper is equal to the total heat gained by the water (assuming no heat is lost to the surroundings), we can set the two equations equal to each other;

q_copper = q_water

(m_copper)(c_copper)(T_final - T_initial) = (m_water)(c_water)(T_final - T_initial)

Solving for the mass of copper, m_copper;

m_copper = (m_water)(c_water)(T_final - T_initial) / (c_copper)(T_final - T_initial)

m_copper = (m_water)(c_water) / c_copper

Substituting the given values;

m_copper = (44.0 g)(4.184 J/g°C) / (0.385 J/g°C)

m_copper = 478.8 g

Therefore, the mass of the copper that was heated is 478.8 g.

To know more about copper here

https://brainly.com/question/29549873

#SPJ4

What ion will be formed by the phosphorus atom shown below when it has a stable set of valence electrons?.

Answers

[tex]P^{3-}[/tex] ion will be formed by the phosphorus atom shown below when it has a stable set of valence electrons.

The Explanation is as follows:

The atomic number of phosphorus is 15.The phosphorus atom's electronic shell arrangement is 2, 8, 5.It has five valence electrons, or five electrons, in its outermost shell.It needs three more electrons to finish up its octet.It consequently has a propensity to pick up three additional electrons. Its valency is 3.An atom obtains a negative charge when it gains an electron.The phosphorus atom will therefore obtain a 3 unit negative charge if it gains 3 electrons to have a stable set of valence electrons.so the ion formed will be [tex]P^{3-}[/tex]

Phosphorus can gain 3 electrons, giving it a total of 8 valence electrons. Nonmetallic elements typically gain electrons. [tex]P^{3-}[/tex] is the most stable monoatomic ion that can be created from phosphorus.

Learn more about Monoatomic ion:

https://brainly.com/question/29143691

#SPJ4

The complete question is:

What ion will be formed by the phosphorus atom shown below when it has a stable set of valence electrons?.

A. [tex]P^{5+}[/tex]

B. [tex]P^{3+}[/tex]

C. [tex]P^{5-}[/tex]

D. [tex]P^{3-}[/tex]

Assuming the pressure of a gas in a closed system is constant. If the temperature is increased, how can the system adjust to the change?

Answers

Answer:

Reducing the pressure in the system

Which is a conjugate acid -base pair?HNO3 / NO3−H3O+ / OH−H2SO4 / SO42−H3PO4 / HPO42−

Answers

A conjugate acid-base pair is composed of two species that are related to each other through the transfer of a proton. In this case, the species that can donate a proton is called the acid, and the species that can accept a proton is called the base.

Therefore, the conjugate acid-base pairs are as follows:
- HNO3 / NO3- : Nitric acid (HNO3) is the acid that donates a proton, while nitrate ion (NO3-) is the base that accepts a proton. Thus, they form a conjugate acid-base pair.
- H3O+ / OH- : Hydronium ion (H3O+) is the acid that donates a proton, while hydroxide ion (OH-) is the base that accepts a proton. Thus, they form a conjugate acid-base pair.
- H2SO4 / SO42- : Sulfuric acid (H2SO4) is the acid that donates a proton, while sulfate ion (SO42-) is the base that accepts a proton. Thus, they form a conjugate acid-base pair.
- H3PO4 / HPO42- : Phosphoric acid (H3PO4) is the acid that donates a proton, while hydrogen phosphate ion (HPO42-) is the base that accepts a proton. Thus, they form a conjugate acid-base pair.
In summary, all of the given options are conjugate acid-base pairs.

learn more about acid here

https://brainly.com/question/26775834

#SPJ11

Can we tell if the F in PF3 undergoes hybridization?

Answers

Yes, we can tell if the F in PF₃ undergoes hybridization. The F atom in PF₃ is sp³ hybridized, meaning that it has four orbitals that are each a hybrid of 1s and 3p orbitals.

What is hybridization?

Hybridization is the process of combining two or more distinct entities to create a new, often superior, version of the original entities. The entities which are combined can vary in type; they can be two different species, two different genes, two different technologies, two different processes, two different materials, etc. It is a powerful tool for advancing research, development, and innovation in various fields. Hybridization can be used to create unique characteristics, qualities, and abilities that are not found in either of the parent entities.

This results in four sp₃ hybridized orbitals arranged in a tetrahedral shape, which allows the F atom to form three single bonds to the three P atoms in the molecule. This hybridization is necessary in order for the F atom to form these three bonds.

To learn more about hybridization

https://brainly.com/question/22765530

#SPJ4

Pikaia, only fossil found in Burgess Shale with an internal nerve cord

Answers

Pikaia is considered to be one of the most significant fossils found in the Burgess Shale due to its unique characteristics. It is the only known Burgess Shale fossil that possesses an internal nerve cord.

Pikaia was a small, worm-like creature that lived over 500 million years ago. It was about five centimeters long and had a slender, elongated body with a series of segments. Its internal nerve cord was located on the dorsal side of its body and extended the length of its body.

The presence of an internal nerve cord in Pikaia is significant because it is an early indication of the evolution of a central nervous system, which is a defining feature of most animals today. Pikaia is therefore considered to be an important transitional form in the evolution of animals.

Overall, Pikaia's unique characteristic of possessing an internal nerve cord makes it an important fossil in understanding the evolution of animals and the development of nervous systems.

To know more about fossil

brainly.com/question/31419516

#SPJ11

Hydrocarbons. When hydrocarbons are burned to produce energy, the resulting products are
carbon dioxide and water. When hydrogen and oxygen are combined to produce energy, the
resulting product is only water. Why are car manufacturers exploring hydrogen fuel cell
technology as a possible replacement for gasoline-burning engines? Make a claim and argue
from evidence

Answers

Hydrocarbons [tex]C_{n} H_{2n+2}[/tex] When hydrocarbons are burned to create energy, the byproducts include carbon dioxide, which is produced by gasoline-burning engines and contributes to the rise in greenhouse gases.

Any hydrocarbon can be burned with oxygen to produce three byproducts: carbon dioxide, water, and heat, as illustrated in the general reaction below. When hydrocarbons are burned with oxygen ([tex]O_{2}[/tex]) present, carbon dioxide ([tex]CO_{2}[/tex]) and water ([tex]H_{2} O[/tex]) are produced. Carbon monoxide (CO) may also be released during the burning of hydrocarbons if there is an imbalance between the amount of carbon and oxygen present. Occasionally, incomplete combustion results in the release of unburned hydrocarbons into the atmosphere.

Read more about burns gasoline at

https://brainly.com/question/14745254

#SPJ4

What is the pH of 0.15 M solution of trimethylammonium nitrate, (CH3)3NHNO3, a salt?
a. 8.66
b. 9.20
c. 8.88
d. 5.12
e. 5.34

Answers

The pH of a solution is a measure of its acidity or basicity, and it is defined as the negative logarithm of the concentration of hydrogen ions (H+). In the case of a salt such as trimethylammonium nitrate, which is the product of a weak base (trimethylamine, (CH3)3N) and a strong acid (nitric acid, HNO3), the solution will be slightly acidic.

This is because the cation (trimethylammonium, (CH3)3NH+) is a weak acid that can donate a proton (H+) to water, producing hydronium ions (H3O+). The anion (nitrate, NO3-) is a spectator ion that does not affect the pH.

To calculate the pH of a 0.15 M solution of trimethylammonium nitrate, we need to know the acid dissociation constant (Ka) of the trimethylammonium cation. This value can be found in a table or calculated using the equilibrium constant expression for the acid-base reaction:

(CH3)3NH+ + H2O ⇌ (CH3)3N + H3O+

Ka = [ (CH3)3N ][ H3O+ ] / [ (CH3)3NH+ ]

Assuming that the equilibrium concentration of (CH3)3NH+ is equal to the initial concentration (because it is a weak acid), and using the value of Ka = 4.3 x 10^-10, we can solve for [H3O+]:

Ka = [ (CH3)3N ][ H3O+ ] / [ (CH3)3NH+ ]
4.3 x 10^-10 = [ x ][ x ] / 0.15
x = 3.4 x 10^-6 M

Therefore, the concentration of hydronium ions in the solution is 3.4 x 10^-6 M, and the pH can be calculated as:

pH = - log [H3O+]
pH = - log (3.4 x 10^-6)
pH = 5.34

Therefore, the pH of a 0.15 M solution of trimethylammonium nitrate is 5.34, indicating that it is slightly acidic.

To know more about trimethylammonium please visit....

brainly.com/question/30884996

#SPJ11

Which of the following salts forms an basic solution when dissolving in water? a) cak2 b) aiciz c) nhano3 d) ki

Answers

the correct answer is (d) KI.

What is conjugate base?

In chemistry, a conjugate base is the species that is formed when an acid loses a proton (H+). More specifically, the conjugate base of an acid is the species that remains after the acid has donated its proton.

When salts dissolve in water, they may produce acidic, basic, or neutral solutions depending on the nature of the ions present in the salt.

In general, salts that contain the conjugate base of a weak acid or the cation of a strong base will produce a basic solution when dissolved in water.

Among the given options, the salt KI contains the cation K+ which is the conjugate base of a strong acid (potassium hydroxide) and the anion I- which is a weak conjugate base of a weak acid (hydroiodic acid). Since the cation is not acidic and the anion is weakly basic, the resulting solution will be slightly basic. Therefore, the correct answer is (d) KI.

To know more about  conjugate base visit:

https://brainly.com/question/1888879

#SPJ4

Consider the Lewis structures for the compound SO3 and the polyatomic ions SO32- and SO 2-. Which of
these would exist as a set of resonance structures?
a. SO3 only
B. s032- onlv
C. S042- only
d all of these show resonance
e. none of these show resonance

Answers

SO3 only would exist as a set of resonance structures

Define resonance.

In valence bond theory, resonance, also known as mesomerism, is a means to describe bonding in specific molecules or polyatomic ions by combining numerous contributing structures into a resonance hybrid.

The electronic bonding of a single polyatomic species, including fractional bonds and fractional charges, is described by resonance structures, which are a collection of two or more Lewis structures.

There are three resonance configurations in sulfur trioxide. However, because all of the oxygen atoms in SO3 are equal, all of the structures are equivalent. Three oxygen atoms and one sulfur atom make up sulfur trioxide. With a bond angle of 120, sulphur is sp2 hybridized with a trigonal planar structure in SO3.

To learn more about resonance structures use:

https://brainly.com/question/28660681

#SPJ4

In the reaction of iron and chlorine, what mass of iron is needed to prepare 11.86 g of the iron chloride product if, under the conditions of the reaction, the electron configuration of the iron cation in the product is 1s22s22p63s23p63d6?

Answers

5.1g of iron is needed to prepare 11.86 g of the iron chloride product if, under the conditions of the reaction, the electron configuration of the iron cation in the product is 1s22s22p63s23p63d6

Define electronic configuration.

The distribution of electrons in an element's atomic orbitals is described by the element's electron configuration. Atomic electron configurations adhere to a standard nomenclature in which all atomic subshells that contain electrons are arranged in a sequence with the number of electrons they each hold expressed in superscript.

Only ferrous chloride (FeCl2) is produced when metallic iron is treated with hydrochloric acid. The other product released is hydrogen gas. Ferric chloride (FeCl3) is created when iron is heated in the presence of chlorine gas.

Fe + Cl2 → FeCl2

1 mole iron reacts to give 1 mole FeCl2

No. of moles of Fe and FeCl2 are 1.

55g of Fe produces 126g of FeCl2

So 11.86g of FeCl2 is formed from 55*11.86/126 i.e. 5.1g

To learn more about electron configuration use:

https://brainly.com/question/23390564

#SPJ4

Why is an anhydrous condition needed for preparing and reacting grignard? (grignard lab)

Answers

An anhydrous (water-free) condition is needed for preparing and reacting Grignard reagents because water can act as a reactant in the Grignard reaction and may quench the reaction.

What is reaction?

Reaction is the process by which substances interact with each other to form new substances. It involves a change in the chemical composition of the substances, usually resulting in the release of energy. Reactions are essential for the formation and maintenance of life. Reactions occur naturally in nature, and can be induced by various factors such as heat, light, and pressure. Reactions can occur between two or more substances, and can involve a single substance reacting with itself. Reactions can produce a variety of products, including gases, solids, and liquids. The rate of reaction depends on the temperature, pressure, and concentration of the reactants.

Also, water can act as an acid and hydrolyze the Grignard reagent, leading to decomposition of the Grignard reagent. Additionally, the presence of water will prevent the formation of Grignard reagents from the starting materials.

To learn more about reaction
https://brainly.com/question/25769000
#SPJ4

the solid baso4 is collected, dried, and found to have a mass of 2.54 g . determine the percent yield.

Answers

1.09% is the percent yield as the solid baso4 is collected, dried, and found to have a mass of 2.54 g .

Define yield.

A chemical reaction's yield is determined by the ratio of the amount of product to the amount of reactant. most often represented as a percentage. Moles of product = % Yield.

The % ratio of the theoretical yield to the actual yield is known as the percent yield. It is calculated as the theoretical yield multiplied by 100% divided by the experimental yield. The percent yield is 100% if the theoretical and actual yields are equal.

The mass in grams of one mole of a chemical is its molar mass. A mole is the measurement of the number of things, such as atoms, molecules, and ions, that are present in a substance.

Molar mass of BaSO4 is 233 g/mol

Given mass is 2.54g

Percent yield will be 2.54/233 *100 i.e. 1.09%

To learn more about molar mass use:

https://brainly.com/question/837939

#SPJ4

1. G) Using particle-level reasoning, explain why delta S solution is positive for the dissolution of urea in water.

Answers

Delta S solution is positive for the dissolution of urea in water because when urea is dissolved in water, the particles of urea become surrounded by water molecules.

What is dissolution?

Dissolution is a legal process that involves the end of a corporate entity due to the passing of a resolution by the shareholders or directors. This resolution is then followed by the filing of documents with the state or country in which the business is registered. During dissolution, the corporation ceases to exist and all of its assets and liabilities are distributed to the shareholders.

This increases the disorder of the system, resulting in an increase in entropy (delta S). This is due to the fact that more energy is needed for the water molecules to arrange themselves around the urea particles, increasing the number of possible microstates and resulting in an overall increase in entropy.

To learn more about dissolution
https://brainly.com/question/16818744
#SPJ4

Write an equation, including state symbols, for the reaction that has an enthalpy change equal to the lattice dissociation enthalpy of magnesium chloride.

Answers

The lattice dissociation enthalpy of magnesium chloride (MgCl2) is the energy required to break one mole of MgCl2 in its solid state into its constituent gaseous ions Mg2+ and 2 Cl-. This can be represented by the following equation:

MgCl2(s) → Mg2+(g) + 2 Cl-(g)

Note that "(s)" represents the solid state and "(g)" represents the gaseous state of the ions.

TO KNOW MORE ABOUT lattice dissociation enthalpy CLICK THIS LINK -

brainly.com/question/29570387

#SPJ11

What are the basic postulates of valence bond theory?

Answers

The Valence Bond (VB) Theory is a quantum theory of chemical bonding which states that a chemical bond is formed when two atoms share a pair of electrons. The theory has three postulates:

What is Valence?

Valence is a term used in psychology to describe the degree to which a person experiences an emotion, such as happiness or sadness. It is associated with the amount of pleasure or displeasure that one feels toward an event, object, or situation. Valence is measured on a scale from positive to negative, with positive emotions having a higher valence than negative emotions.

1. Hybridization: Hybridization is the process of combining atomic orbitals to form new hybridized orbitals with lower energy and new shapes. These hybrid orbitals are more stable and better suited for bonding than the original atomic orbitals.

2. Bond Formation: Bond formation occurs when two hybridized orbitals overlap and share a pair of electrons. This overlap creates a strong electrostatic attraction between the two atoms, which is the chemical bond.

3. Resonance: Resonance is the idea that the chemical bond between two atoms can be thought of as a combination of several different structures. These different structures can be represented by different resonance structures. Each resonance structure has a different energy and each can contribute to the overall strength of the bond.

To learn more about Valence

https://brainly.com/question/371590

#SPJ4

calculate the hy droxide ion concentration in an aqueous potassium hydroxide solution that contains 3.50 10- 6 m in hydronium ion

Answers

 To solve this problem, we need to use the equation for the ionization of water:
H2O ⇌ H+ + OH-
This equation tells us that water can dissociate into hydrogen ions (H+) and hydroxide ions (OH-). In pure water, the concentrations of H+ and OH- are equal at 1.0 × 10-7 M each. However, in an aqueous solution of an acid or a base, the concentrations of H+ and OH- can change.

In this case, we are given the concentration of hydronium ion (H3O+) in a solution of potassium hydroxide (KOH). Since KOH is a strong base, it completely dissociates in water to form potassium ions (K+) and hydroxide ions (OH-):
KOH → K+ + OH-
Therefore, the concentration of OH- in the solution is equal to the concentration of KOH, which is not given. However, we can use the fact that the solution is neutral to find the missing concentration.
A neutral solution has a pH of 7, which means that the concentration of H+ is equal to the concentration of OH-:
[H+] = [OH-] = 1.0 × 10-7

Since we are given the concentration of H3O+, we can use the equation for the ion product of water (Kw) to find the concentration of OH-:
Kw = [H+][OH-] = 1.0 × 10-14
[H3O+][OH-] = 1.0 × 10-14
[OH-] = 1.0 × 10-14 / [H3O+]
[OH-] = 1.0 × 10-14 / 3.50 × 10-6
[OH-] = 2.86 × 10-9 M
Therefore, the hydroxide ion concentration in the aqueous potassium hydroxide solution is 2.86 × 10-9 M

To know more about ionization visit:-

https://brainly.com/question/28385102

#SPJ11

which of the following actions are permitted in balancing a chemical equation? select all that apply. multiple select question. inserting coefficients in front of formulas of reactants and products adding reactants or products altering the formulas of reactants or products multiplying all coefficients by a common factor

Answers

The actions permitted in balancing a chemical equation are inserting coefficients in front of formulas of reactants and products and multiplying all coefficients by a common factor.

Balancing a chemical equation involves making sure that the number of atoms of each element is equal on both sides of the equation. This is done by inserting coefficients in front of formulas of reactants and products, which indicates the number of molecules or atoms of each substance involved in the reaction. Multiplying all coefficients by a common factor is also permitted, as long as it does not alter the relative ratios of the coefficients.

Adding reactants or products and altering the formulas of reactants or products are not permitted in balancing a chemical equation, as they would result in a different chemical reaction.

To know more about balancing a chemical equation, visit:

https://brainly.com/question/28294176

#SPJ11

The reaction2NOBr → 2NO + Br2exhibits the rate lawRate = k[NOBr]2 where k = 1.0 × 10-5 M-1 • s-1 at 25° C. This reaction is run where the initial concentration of NOBr ([NOBr]0) is 1.00 × 10-1 M. What is one half-life for this experiment?

Answers

The half life for the given reaction is  1.44 x 10⁻⁶/s which is calculated in the below section.

For the given reaction,

The half-life of a first-order reaction is a constant that is related to the rate constant for the reaction: t1/2 = 0.693/k.

The value of k(rate constant) = 1.0 x 10⁻⁵ mol/L/s

The half life for the reaction can be calculated as follows-

k = 0.693 / t1/2

Substitute the value of k in the above equation as follows-

1.0 x 10⁻⁵  = 0.693 / t1/2

t1/2 = 1.0 x 10⁻⁵ / 0.693

      = 1.44 x 10⁻⁶ /s

To learn more about half life check the link below-

https://brainly.com/question/1160651

#SPJ4

5. during this experiment, you used a calorimeter without a lid. if you used a lid, would it change any of your results? how so? (2 pts)

Answers

If the lid on the polystyrene cup had not been covering it during the experiment, much of the heat released by the neutralization process could have escaped into the atmosphere.

What is a calorimeter?

A calorimeter is a device used to measure the heat of chemical processes or physical changes, as well as heat capacity. Among the most frequent varieties are differential scanning calorimeters, isothermal micro calorimeters, titration calorimeters, and accelerated rate calorimeters.

Calorimeter Types

Calorimeters for Reaction. Constant Volume Calorimeters (Bomb Calorimeters)

Learn more about Calorimeters here:

https://brainly.com/question/2963957

#SPJ1

Other Questions
following the decision by major trucking companies to use self-driving trucks, most truck drivers lost their jobs. is an example of based on the study of patient h.m., it has been concluded that the hippocampus is a. where immediate memories are stored. b. not required for retrieval of long-term memories. c. where long-term memories are stored. d. the location of short-term memory. e. the area of the brain that causes severe retrograde amnesia when damaged. reaching agreement on several small issues is known as which of the following?A. contradictionB. agreementC. stackingD. refinementE. persuasion Which statement best describes the direction of heat flow by conduction between two samples of the same material?. Calculate the depth in the ocean at which the pressure is three times atmospheric pressure. Atmospheric pressure is 1. 013 105 pa. The acceleration of gravity is 9. 81 m/s 2 and the density of sea water is 1025 kg/m3. Answer in units of m. a hypothetical element x has 3 naturally occurring isotopes; x-40, x-41 and x-42. their abundances are 72.0%, 9.00%, and 19.0% respectively. what is the atomic mass of x? cosmetics firm satinsilk is revamping its mission statement and advertising strategy. the ceo stresses that the new mission statement should be market-oriented rather than product-oriented. which of the following mission statements will best suit the company? a registered representative volunteers to assist a relative in organizing a charity dinner. what permissions must the representative obtain from his employer?a)permission from his employer is needed.b)no permission is needed, but he does need to provide written notice to the employer.c)no permission is needed, but he needs to provide a verbal notification to his supervisor.d)no permission is needed unless his firm has rules on this activity. In whom Orbital cellulitis is common? what is the only humid climate that has a strong winter precipitation maximum? group of answer choices mediterranean climate (csa and csb) humid subtropical climate (cfa) humid continental climate (dfa, dfb, dwa, dwb) tundra climate (et) tropical wet and dry climate (aw) Which of the following is the best alternative to the use of weapons forresolving a conflict with someone?A. Walk away from the conflict.B. Start a fist fight with the person.C. Start a new conflict with someone else.D. Verbally abuse the person. The __________ nervous system controls glandular secretion. An ice block in the form of rectangular prism with a square base is melting at a rate of 550cm^3/min. The base length is decreasing at a rate of 1cm/min. How fast is the surface area of the ice block changning when the base length is 10cm, and height is 20cm? How does Victor become a disenfranchised member of society himself? Five nerves that arise from posterior cord of brachial plexus? (5) find the total number of different 4-digit numbers using all the digits in the number 4129. (hint: you can't repeat digits.) Choose any one medium or large organization in your town or city that is atleast 5 or 10 years old. Preform online research and speak to various people to get a perspective on how your community and this organization influence and affect eachother. Write a short report. FILL IN THE BLANK. A medium is able to transport a wave from one location to another because the particles of the medium are ____.a. frictionlessb. isolated from one anotherc. able to interactd. very light Teachers often wish that students came to class prepared having read the upcoming material. A teacher could design the grading system to motivate students to come to class prepared by ___________the grade weight assigned to being prepared. 19. Two angles are complementary. The largerangle is 36 more than the smaller angle. Whatis the measure of the larger angle?