a 15.0-ml sample of an electroplating solution is analyzed for its sulfuric acid concentration. it takes 52.6 ml of the 0.583 m to neutralize the sample. find the molarity of the sulfuric acid.

Answers

Answer 1

The molarity of the sulfuric acid from a 15ml sample of an electroplating solution is 1.022 M


What is molarity?

It is the amount of a substance in a certain volume of solution. Molarity is defined as the moles of a solute per liters of a solution. Molarity is also known as the molar concentration of a solution.

How to calculate the molarity of the sulfuric acid?
Based from the rule of acidimetry and alkalimetry

The formula is :
V₁ * S₁ = V₂ * S₂

where
V₁ = 15ml

V₂ = volume of alkali solution = 52.6ml

S₁ = strength of acid solution in normality = unknown

S₂ = strength of alkali solution in normality = 0.583M (Because NaOH normality and molarity has the same value)

Now, let's go back to the formula

15 * S₁ = 52.6 * 0.583

S₁ = 30.6658 / 15

= 2.044N

The molarity of the sulfuric acid is

2.044 / 2 = 1.022 M H₂SO₄ (divided by 2 because H₂SO₄ is a dibasic acid)

So the molarity of sulfuric acid is 1.022 M.

This question is incomplete, The complete question is as follows :

a 15.0-ml sample of an electroplating solution is analyzed for its sulfuric acid concentration (H₂SO₄). it takes 52.6 ml of the 0.583 M NaOH to neutralize the sample. find the molarity of the sulfuric acid.

Learn more about molarity https://brainly.com/question/8732513

#SPJ4


Related Questions

a breath of air has a volume of 1.05 l at a pressure of 740. torr and body temperature, 37oc. calculate the number of molecules in the breath

Answers

The number of molecules in the breath: 2.71 × 10²² molecules

What is ideal gas equation?

PV = nRT denotes the ideal gas equation. In this equation. P stands for the ideal gas's pressure, V for its volume, n for the total amount of ideal gas expressed in moles, R for the universal gas constant, and T for temperature in this equation.

Given that:

Pressure (P) = 740.0 torr

= (740.0/760) atm

= 0.9737 atm

Volume (V) = 1.05 L

Temperature (T) = 3.7°C

= (3.7+273) K

= 276.7 K

find the number of moles using:

P×V = n×R×T

0.9737 atm × 1.05 L = n × 0.08206 atm.L/mol.K × 276.7 K

or, n = 4.5 × 10⁻² mol

Thus, the number of molecules = number of mol × Avogadro’s number

= 4.5 × 10⁻² mol × (6.023 × 10²³) molecules/mol

= 2.71 × 10²² molecules

Answer:  2.71 × 10²² molecules.

To know more about molecules refer to:

https://brainly.com/question/26044300

#SPJ1

Why is FeCl3 a Lewis acid?

Answers

FeCl3 is a Lewis acid because it has an empty d orbital that can accept electrons from a Lewis base. The empty d orbital allows FeCl3 to form a coordinate covalent bond with a Lewis base, forming a Lewis acid-base complex. This empty d orbital is not filled by the three chloride ions, making it an excellent Lewis acid.

In the Lewis theory of acid-base reactions, bases donate electron pairs and acids gain electron pairs. Therefore, a Lewis acid is any substance that: B. H+ ions that can accept unbonded electron pairs. In other words, Lewis acids are electron pair acceptors. A Lewis base is a substance that: OH ions that can donate unbonded electron pairs. Therefore, Lewis bases are electron pair donors.

An advantage of Lewis theory is how it complements models of redox reactions. Redox reactions involve the transfer of electrons from one atom to another with a net change in the oxidation number of one or more atoms.

Learn more about Lewis Acid:

https://brainly.com/question/15570523

#SPJ4

in the following reactions, which species is oxidized? question 15 options: a) cu b) none, this is not a redox reaction. c) fe d) o e) s

Answers

In this reaction the oxidation number of hydrogen increases that is oxidation of hydrogen and the reduction of Copper occurs.

What is redox reaction ?

Any chemical process in which a participating chemical species' oxidation number changes is an oxidation-reduction reaction, often known as a redox reaction.

It is also clear that this is a reduction reaction because the oxidation number for copper decreases from +2 in Cu2+ to 0 in copper. Since oxidation involves the loss of electrons, 2H2O is oxidized when it loses 4 electrons to create O2.

The given reaction is :

CuO + H₂ = Cu + H₂O

in this reaction the oxidation number of hydrogen increases that is oxidation of hydrogen and the reduction of Cu occurs.

To know more about oxidation you may visit the link:

https://brainly.com/question/9496279

#SPJ4

hich of the following excited state electron configurations of C would require the longest wavelength of light to produce? O 15²2s²2p²45? 1s22s22p13p1 O1s22s22p13s1 1s22s22p2

Answers

For such excited state 1s22s22p13s1, the greatest wavelength is necessary. The Bohr model proposes that energy is absorbed by an atom, which causes it to jump from one energy level to another.

What does a Bohr model simply mean?

A structural representation of an atom is the Bohr Model. Niels Bohr, a physicist, put forth the hypothesis in 1913. According to this idea, electrons orbit the atomic nucleus within an atom in discrete circular shells. The atomic planetary model is another name for the model.

What constitutes Bohr's model's fundamental ideas?

Answer: 1) Elections move in circular, constant-energy orbits around the nucleus. 2) The only stable electron orbits are those in which h/2Pi is a multiple of the electron's angular momentum. 3) An electron moving of one orbital to another causes a photon to be either emitted or absorbed.

To know more about Bohr model  visit:

https://brainly.com/question/3964366

#SPJ4

Calculate the limiting reactant for
4AsCl3+6H2O——> As406+12HCl

Answers

The limiting reactant is the one with the least mole ratio.

How to calculate the limiting reactant ?

It is limiting to use the reactant with the smallest mole ratio. Magnesium is the limiting reactant, with a predicted stoichiometric mole ratio of 4.12.

By dividing the number of moles of each reactant by its stoichiometric coefficient in the balanced chemical equation, you may determine which reactant is the limiting one. Calculate the maximum number of moles of product that can be produced from the limiting reactant using mole ratios.

4AsCl3+6H2O——> As406+12HCl

As4O6 + 12HCl --> 4AsCl3 + 6H2O

Balance: As4O6 + Hal --> AsCl3 + H2O

AsCl3 + H2O -->As4O6 + Hal

To learn more about limiting reactant  refer to:

https://brainly.com/question/26905271

#SPJ1

What parameter does the detector measure directly? Absorbance b) Total incident light shining on the cuvette (o) c) Light transmitted through the cuvette (Wn) d) Wavelength

Answers

Total incident light shining on the cuvette is the parameter that the spectrophotometer's detector measures directly.

A spectrophotometer is a device used to gauge electromagnetic radiation strength at various wavelengths. The spectrophotometer measures the light intensity of a sample by passing a light beam through it. The following are some of the parts of a spectrophotometer:

Light Source: The spectrophotometer needs a light source to produce lights.

Lens collimator:This lens directs the light from the light source to a monochromator or prism.

Detectors: These are photosensitive tools, like photocell detectors, that generate current proportional to the amount of light that strikes them.

To learn more about cuvette click here https://brainly.com/question/29385690

#SPJ4

in a redox-reaction that uses starch as an indicator, the solution turns blue-black. what can we say about that reaction?

Answers

Answer:

The reaction is nutride-cullic and sees all math about our lives.

Explanation:

How many protons, electrons and neutrons are in 34S2-? Number of protons ______________ Number of electrons _____________ Number of neutrons _____________

Answers

In a 34S2-, the number of protons is 16, number of electrons is 18, and number of neutrons is 18.

Sulphur 34 is the stable isotope of sulfur. Sulfur has an atomic number of 16 and relative atomic mass of 34. Atomic number refers to the number of protons found in the nucleus of every atom of that element. Hence, the number of protons would be 16 for Sulphur 34. Atomic mass refers to number of protons and neutrons in the nucleus of the atom. Hence, the number of neutrons would be 18 for Sulfur 34.  The number of electrons in a neutral atom is equal to the number of protons. However, in the give ion, 34S2- which is negatively charged to negative two implying that it has two extra electrons, hence the number of electrons is 18.

Learn more about 34S2-:

https://brainly.com/question/18210355

#SPJ4

Which one of the following is NOT a strong electrolyte? A) LiOH B) HNO3 C) KBr D) NH4CI E)HNO2

Answers

Among the given options, formic acid is not an example of strong electrolyte and it is a weak electrolyte and it is a weak carboxylic acid.

Which are not strong electrolytes?

HCOOH is a weak electrolyte. Rest all are strong acids and they completely disassociates into ions.

Is HCl not a strong electrolyte?

Hydrogen chloride is a strong electrolyte, and it dissolves in water completely to form Hydrogen ions and chlorine ions.

Is NH4OH a strong electrolyte?

NH4OH is a weak electrolyte as it is only slightly ionize or dissociates in water. Hence, it does not dissociate completely into ions and value of Kb is low.

What are the 7 weak electrolytes?

Weak Electrolytes and their Examples

Examples of weak electrolytes include acetic acid (CH3COOH), carbonic acid (H2CO3), ammonia (NH3), hydrogen fluoride (HF), hydrogen cyanide (HCN), and pyridine (C2H5N), etc

To know  more about formic acid visit;

https://brainly.com/question/13016575

#SPJ4

The Lewis diagram for NOBr is: Br The electron-T pair geometry around the N atom in NOBr is There is/are lone pair(s) around the central atom_ So the geometry of NOBr is The Lewis diagram for NOzF is: 6-N=& The electron-pair geometry around the atom in NOzF is There is/are lone pair(s) around the central atom, so the geometry of 'NOzF is Submit Answer Retry Entire Group more group attempt remaining

Answers

The molecular geometry of NOBr is bent, and the electron geometry is trigonal planar.

In other words, two atoms are joined together. On the nitrogen, there is only one isolated pair.

What does the term NOBr mean?

The chemical compound with the chemical formula NOBr is nitrosyl bromide. It is a red gas that condenses at a temperature that is just below ambient.

N's number of bonds in NOBr is how many.

The connection between N and O in nitrosyl bromide contains one sp2 hybrid orbital and one p atomic orbital. Between N-Br and N-O, N in NOBr contains a total of two single bonds.

To know more about NOBr visit:-

https://brainly.com/question/14469519

#SPJ4

CK12 Extra practice. Mol conversions 1. You have 19.7 grams of a material and wonder how many moles were formed. Your friend tells you to multiply the mass by grams/mole. Is your friend correct? Explain the answer using dimensional analysis.

Answers

Use the grams to moles formula to calculate the number of moles, n, of a substance with a given mass, m, (in grams) accurately. n = m / M, where M is the substance's molar mass

What does a mole of 1 gram mean?

The number of atoms, molecules, or ions (or any other entity) in a substance is measured in gram moles. 6.022 x 1023 is what it is in all entities. It is equivalent to 6.022 x 1023 molecules of H 2 S or, in the case of an atom, 6.022 x 1023 atoms (in case of a molecule )

What is a mole, simply put?

In chemistry, a mole, sometimes spelled mol, is a common scientific measurement unit for huge amounts of little things.

To know more about moles visit:-

https://brainly.com/question/26416088

#SPJ4

a solution of the amino acid tryptophan has an absorbance at 280 nm of 0.54 in a 0.5 cm cuvet. if the molar absorptivity is 6.4 x 103 m-1 cm-1, what is the concentration of the solution?

Answers

1.68×10⁻⁴mol L⁻¹,8.4×10⁻⁵mol/litre is the concentration of the solution

According to the beers - lamberts law:-

A=Ebc------(1)

where,A= Absorbance

E=molar absorbtivity

b=length of the cuvette

c=concentration of the solution

(1) Give that,A=0.54 at d=280mm

b=0.5cm

E=6.4×10³L mol⁻¹cm⁻¹

c=?

∵A=Ebc

c=A/bE

c=0.54/0.5×6.4×10⁻³

c=0.168×10⁻³

c=1.68×10⁻⁴mol L⁻¹

(2) If A=0.3547,E=8435m⁻¹cm⁻¹,b=0.5cm,c=?

c=A/bE

c=0.3547/0.5×8435

c=0.84×10⁻⁴m

c=8.4×10⁻⁵m

so,concentration of the was found to be 8.4×10⁻⁵mol/litre

Concentration in chemistry is defined as the quantity present in a mixture in excess of its total volume. It is possible to distinguish between the four different sorts of mathematical descriptions: mass concentration, molar concentration, number concentration, and volume concentration. Any type of chemical mixture can be referred to by the term "concentration," however solutes and solvents in solutions are most usually mentioned. Osmotic concentration and normal concentration are two variations of the molar (amount) concentration.

Learn more about Concentration here:

https://brainly.com/question/18247103

#SPJ4

Draw the electron distribution diagram for water: Begin with 1 central water molecule. Show the chemistry of each element within the central water molecule (all electron orbits, lone pair electrons, type of chemical bond, polarity/charge, and correct shape). What type of bond creates a water molecule? What type of bond holds water molecule to another water molecule? Next; draw the correct number of other water molecules bonding to thc central water molecule How many other water molecules bond to a central molecule of water?'

Answers

Although the water molecule incorporates no internet electric powered fee, its 8 electrons aren't disbursed uniformly; there may be barely greater terrible fee (purple) on the oxygen cease of the molecule, and a compensating tremendous fee (green) on the hydrogen end.

Each hydrogen atom is covalently bonded to the oxygen through a shared pair of electrons. Oxygen additionally has unshared pairs of electrons. Thus there are four pairs of electrons surrounding the oxygen atom, pairs concerned in covalent bonds with hydrogen, and unshared pairs on the alternative aspect of the oxygen atom. The one and most effective electron ring across the nucleus of every hydrogen atom has most effective one electron.

Read more about water:

https://brainly.com/question/5060579

#SPJ4

increasing permeability of the membrane to potassium will have what effect on the membrane potential?

Answers

The membrane would become more adverse as a result.The membrane would become more negative if the membrane's potassium permeability increased.

What occurs when a potassium-permeable membrane is more permeable?

Similar to this, the gradient in sodium ion concentration tends to encourage their entry into the cell.However, potassium ions are significantly more able to pass through the cell membrane than sodium ions are.As a result, sodium ions diffuse into the cytoplasm more slowly than potassium ions.

What changes to the membrane permeability when the sodium or potassium permeability is increased?

When sodium permeability rises to a point that sodium entrance outweighs potassium departure, depolarization turns into a self-sustaining process, or an action potential forms, the barrier cell membrane voltage is attained.

To know more about membrane potential visit:

https://brainly.com/question/14466527

#SPJ4

What is the oxidation number sulfur in H2S?

Answers

The oxidation number sulfur in H₂S is -2.

A compound's total number of oxidations must be zero.

The two hydrogen atoms in the chemical hydrogen sulfide, H₂S, each have an oxidation number of +1, making a total of +2. As a result, the compound's sulfur has an oxidation number of -2, and the total number of oxidations is 0.

Assume that the sulfur atom in H₂S has an oxidation number of x.

S be x.

Now,

2+x=0

⇒x=−2

What is oxidation number?

The total number of electrons that an atom either receives or loses in order to create a chemical connection with another atom is known as the oxidation number, also known as the oxidation state.

Depending on whether we are taking into account the electronegativity of the atoms or not, these phrases can occasionally have a distinct meaning. Coordination chemistry commonly makes use of the phrase "oxidation number."

What distinguishes an oxidation number from an oxidation state?

In contrast to the oxidation state, which indicates how oxidised an atom is in a molecule, the oxidation number describes the charge that the core metal atom will retain once all ligands have been removed.

To know more about oxidation number:

https://brainly.com/question/13182308

#SPJ4

butanoic acid has a partition coefficient of 3.0 (favoring benzene) when distributed between water and benzene. find the formal concentration of butanoic acid in each phase when 100.0 ml of 0.10 m aqueous butanoic acid is extracted with 25.0 ml of benzene at a ph of 4.00.

Answers

The formal concentration of butanoic acid in water phase = 0.060 M.

The formal concentration of butanoic acid in benzene phase = 0.0157 M.

given that :

volume of aqueous phase = 100 mL

volume of benzene = 25 mL

pH = 4

partition coefficient = 3

pH = - log [H⁺]

[H⁺]  =  10⁻⁴ M

distribution coefficient is given as :

D = K [H⁺] /  [H⁺] + Ka

Ka for the butanoic acid is 1.52 × 10⁻⁵

D = 93 × 10⁻⁴ / 10⁻⁴ +) 1.52 × 10⁻⁵

D = 2.60

fraction of the butanoic acid in water phase :

q = v1 / v1 + Dv2

q = 100 / 165

q = 0.60

concentration of the water phase = 0.60 × 0.10 M

                                                        = 0.060 M

moles of benzoic acid = (0.10 × 100) / 100

                                     = 0.010 mol

mole fraction fraction of benzene phase :

1 - 0.060 = 0.394 mol

moles in benzene phase = 0.394 × 0.01 = 0.0039 mol

concentration = 0.0039 / 0.025

                       = 0.157 M

To learn more about butanoic acid here

https://brainly.com/question/9173074

#SPJ4

a sample contains 116.9 grams of nacl dissolved in 1.0 l of water. what is the molarity of this solution?

Answers

The molarity of a solution of 116.9g of Nacl in 1l water is 2M.

What is molarity of a solution?

A solute's molar concentration is the quantity of that solute in one unit of a solution. It can be measured in mol/L, mol/dm3, or mol/m3. Molarity is the number of moles of solute present per liter of solution

Here,

We know molarity of a solution = moles of solute/litres of a solution

No of moles in 116.9g of nacl=2 (since 1 mole of Nacl=58.5g)

Volume of water= 1l

Therefore molarity of the solution is 2mol/1l= 2M

Hence the molarity of a solution of 116.9g of Nacl in 1l water is 2M.

To know more about molarity from the given link

https://brainly.com/question/26873446

#SPJ4

Why is Venus called Earth's "sister planet"?

Answers

Venus now and again referred to as Earth's “sister planet” or Earth's twin. It is a terrestrial planet due to comparable size, mass, proximity to the Sun, and bulk composition to the ones of the Earth's.

Venus has lengthy been taken into consideration Earth's dual sister. The  planets are very comparable in a few respects and proportion many bodily and orbital characteristics: internal planets. Venus is the second one planet from the Sun. As an indoors planet to Earth, Venus seems in Earth's sky in no way a ways from the Sun, both as morning famous person or night famous person.

Hence, Venus is called Earth's sister planet due to the fact each planets are plenty much like every other.

To learn more about planets check the link below:

https://brainly.com/question/18496962

#SPJ4

refer again to the graph. in which region is the enzyme saturated with substrate?

Answers

Enzyme saturation with the substrate occurs in Region C.

The enzyme is a compound that serves as a catalyst in living things and controls the rate at which chemical processes take place without changing itself in the process.

All biological activities in living things involve chemical reactions, and most of them are controlled by enzymes. Many of these reactions wouldn't occur at an observable rate without the help of enzymes. All facets of cellular metabolism are catalyzed by enzymes. This involves the breakdown of major nutritional molecules (such as proteins, carbs, and lipids) during digestion; the storage and transformation of chemical energy; and the synthesis of cellular macromolecules from smaller precursor molecules. A lack of a specific enzyme is the cause of many inherited human disorders, including albinism and phenylketonuria.

Learn more about enzyme here:

https://brainly.com/question/14953274

#SPJ4

. which of the package labels below would indicate the lowest external radiation hazard? a. radioactive yellow-ii. b. radioactive white-i. c. radioactive yellow-iii.

Answers

The Radioactive White-I label is attached to packages with extremely low levels of external radiation.

When transporting low-level radioactive materials, what form of packaging is used?

Excepted Packaging is used to carry radioactive materials that have extremely low amounts of radioactivity. Excepted packaging is permitted for small amounts of radioactive material that would represent a very minimal risk if discharged in an accident.

Type C packaging is an overpack for the transport of radioactive materials with no activity restrictions by any mode of transportation, including airplanes. The Type C package must retain its containment after impacting a target at 90 m/s (this is similar to a fall from a height of 450 m).

To learn more about Radioactive White-I  to refer:

https://brainly.com/question/23959901

#SPJ4

Why is NaH a strong base?

Answers

When NaH is dissociated, the hydride ion (H) is created, and when NaOH is dissociated, OH is created.

Additionally, the reaction has a very high equilibrium constant, which indicates that the NaH is completely dissociating in water and becoming a strong base.Sodium hydride, often known as NaH or Na+:H-, is the sodium salt of the conjugate base of H2. Strong foundation NaH is very basic, yet it is not nucleophilic. NaH is a base with a broad range of applications in organic chemistry. As a superbase, it may deprotonate a variety of Brnsted acids, including weak ones, to produce the equivalent sodium derivatives.

The goal of NaH [a strong base] is to deprotonate the alcohol, converting it into H2 in the process.

To learn more about NaH please click on below link

https://brainly.com/question/26624404

#SPJ4

which will show maximum depression in freezing point when concentration is 0.1 M?
A. NaCl
B. Urea
C. Glucose
D. K2SO4

Answers

K2SO4 has the most ions out of the options, which means its freezing point will degrade the most. A collective attribute that depends on the quantity of particles is the depression in freezing point.

How do melting and freezing points differ?

The temperature at which a material becomes liquid or solid is known as the melting or freezing point of that substance. Various solids have various melting points.

What in chemistry is the freezing point?

Definition of the freezing point The temperature at which a liquid, under atmospheric pressure, transitions from a liquid to a solid is known as the freezing point. Both the solid and liquid states coexist at the freezing point because these two phases, liquid and solid, are in balance there.

To know more about freezing point visit:

https://brainly.com/question/1550397

#SPJ4

aleks a chemist must dilute of aqueous potassium permanganate solution until the concentration falls to 179 mm. he'll do this by adding distilled water to the solution until it reaches a certain final volume. calculate this final volume, in liters. round your answer to significant digits.

Answers

This final volume, in liters is 0.0285 L.

given that :

molarity M1 = 0.139 M

volume V1 = 0.016 L

molarity M2 = 0.179 M

volume V2 = ?

M1 V1 = M2 V2

V2 = M1 V1 / M2

V2 = ( 0.319 × 0.016 ) / 0.179

V2 = 0.0285 L

Thus, a chemist must dilute of aqueous potassium permanganate solution until the concentration falls to 179 mM. he'll do this by adding distilled water to the solution until it reaches a certain final volume.  this final volume, in liters is 0.0285 L.

This question is incomplete , the complete question is :

A chemist must dilute  16 mL of 319 mM aqueous potassium permanganate solution until the concentration falls to 179 mM. he'll do this by adding distilled water to the solution until it reaches a certain final volume. calculate this final volume, in liters.

To learn more about volume here

https://brainly.com/question/23791589

#SPJ4

14. Classifying The following are balanced
equations for chemical reactions. Classify
each of the equations as synthesis,
decomposition, or replacement.
a. 2 Al + Fe₂O3-
→2 Fe + Al₂O3
b. 2 Ag+S →→→→ Ag₂S
c. CaCO3 → CaO + CO,
d. 2 NO + O₂ → 2 NO₂
-

Answers

a. 2 Al + Fe₂O3-

→2 Fe + Al₂O3

b. 2 Ag+S →→→→ Ag₂S

c. CaCO3 → CaO + CO,

d. 2 NO + O₂ → 2 NO₂

-

Which option describes a situation in which reduction occurs?(1 point)S2– becoming S
a. Cl2 becoming Cl–
b. Al becoming Al3+
c. Xe2+ becoming Xe6+

Answers

In that reaction, reduction has taken place when the oxidation number is reduced, resulting in Cl2 becoming Cl.

How does oxidation work?

Oxidation is the process in which a reactant oxidises during a reaction. Reduction is the term used to describe a reaction in which a reactant picks up electrons. This happens frequently when acid and metals interact. Oxidation is the process in which a reactant oxidises during a reaction.

Who or what causes the oxidation?

Oxidation occurs when an element, peptide, other ion loses one or maybe more electrons during one chemical reaction. While oxidation is happening, the oxidation status of the chemical species rises. Oxygen is not always required for oxidation to occur. The expression was first used to describe how oxygen caused significant ion transfer during a process.

To know more about oxidation visit:

https://brainly.com/question/16976470

#SPJ4

Please label she components of a common filter setup and answer the folowing question. All items will be used. Büchner funnel correct. rubber adaptor is item allows twovacuum connection eces of glass to fit gether to form a seal. Büchner f filter flask vacuum connection rubber adaptor unne filter flask What are two uses of a vacuum filtration setup? Select all that apply. crystallization of a solid from a solution separation of a solution and a precipitate drying a filtered solid storage of a solutionPlease label she components of a common filter setup and answer the folowing question. All items will be used. Büchner funnel correct. rubber adaptor is item allows twovacuum connection eces of glass to fit gether to form a seal. Büchner f filter flask vacuum connection rubber adaptor unne filter flask What are two uses of a vacuum filtration setup? Select all that apply. crystallization of a solid from a solution separation of a solution and a precipitate drying a filtered solid storage of a solution

Answers

The items that are applied to her observations are crystallization of a solid from a solution separation of a solution and a precipitate drying a filtered solid.

Buchner funnels are used withinside the laboratory for vacuum-assisted liquid filtering. In natural chemistry, those funnels are used to acquire recrystallized compounds due to the fact they assist dispose of moisture from the very last product. A clear out out funnel is a laboratory funnel used for keeping apart solids from beverages thru the laboratory procedure of filtering. In order to obtain this, a cone-like formed piece of clear out out paper is normally folded right into a cone and positioned in the funnel. The suspension of strong and liquid is then poured via the funnel.

To learn more about Buchner funnels check the link below:

https://brainly.com/question/28206200?source=aidnull

#SPJ4

Complete question:

Please label she components of a common filter setup and answer the following question. All items will be used. Büchner funnel correct. rubber adaptor is item allows two vacuum connection aces of glass to fit together to form a seal. Büchner f filter flask vacuum connection rubber adaptor u filter flask What are two uses of a vacuum filtration setup? Select all that apply. crystallization of a solid from a solution separation of a solution and a precipitate drying a filtered solid storage of a solution.

identify the compound that has hydrogen bonding. identify the compound that has hydrogen bonding. ch3ch3 hi h2 hf (ch3)3n

Answers

The chemical compound HF, or hydrogen fluoride, acts as both a hydrogen donor and acceptor during the process. It exhibits hydrogen bonding because the fluoride is linked to the hydrogen atom in this reaction. Option C is the correct option.

HF molecules are held together by a covalent bond or the strong hydrogen bonding between a hydrogen and a fluorine atom. Given that it contains a potent electronegative ion, fluorine can act as both a hydrogen acceptor and donor. This material exhibits hydrogen bonding as a result.

In chemistry, a hydrogen bond is a relatively strong attraction between an electronegative atom, which is generally the acceptor of the bond, and also an electronegative atom that is covalently bound to a higher electronegative donor atom or group. This attraction is termed to be electrostatic in general.

Find more information about hydrogen bonding:

brainly.com/question/15099999

#SPJ4

Freckles are dominant (F) over no freckles (f). If both parents are heterozygous. Determine the genotype and phenotype ratios. (5 points)

Answers

Answer: If both parents are heterozygous for freckles, then they each have a genotype of Ff. This means that each parent has one dominant allele for freckles and one recessive allele for no freckles. When these two parents mate, their offspring will have a genotype that is a combination of the genotypes of the two parents.

Explanation:

There are four possible combinations of genotypes that the offspring could have: FF, Ff, ff, and Ff. The first three genotypes are possible because each parent has a 50% chance of passing on each of their two alleles to their offspring. The fourth genotype, Ff, is possible because the offspring could inherit one F allele from one parent and one f allele from the other parent.

The genotype ratios for the offspring of these two heterozygous parents would be 1:2:1. This means that there is a 25% chance that an offspring will have the genotype FF, a 50% chance that it will have the genotype Ff, and a 25% chance that it will have the genotype ff.

The phenotype ratios for the offspring of these two heterozygous parents would be 3:1. This means that 75% of the offspring will have freckles, and 25% of the offspring will not have freckles. This is because the genotypes FF and Ff both result in the freckles phenotype, while the genotype ff results in the no freckles phenotype

What is the correct name for HF (aq)?
a. monohydrogen fluoride
b. hydrofluoric acid
c. fluoric acid
d. hydrogen fluorate
e. hydrofluorate acid

Answers

The correct name for HF (aq) is Hydrofluoric acid which means option b is the correct choice.

Hydrofluoric acid is a solution of hydrogen fluoride in water. Solutions of HF are colorless, acidic and distinctly corrosive. It is used to make maximum fluorine-containing compounds; examples consist of the usually used pharmaceutical antidepressant medicine fluoxetine and the fabric PTFE. The nature of this acid is highly corrosive due the hydrogen ions of the acid and it is toxic in nature due to the presence of flouride ions. Hydrofluoric acid or Hydrogen Fluoride (HF) is deadly if inhaled, if swallowed, or in touch with pores and skin. It reasons intense pores and skin burns and eye damage.

Therefore, option b is the correct choice.

To learn more about acid check the link below:

https://brainly.com/question/25148363

#SPJ4

Name one substance in the diagram that would
have a net movement out of the cell. (The beaker has 5% ionide, 85% water, 10% protein, The cell has 90% water, 5% starch, and 5% glucose)

Answers

The substance in the diagram that would have a net movement out of the cell is Water.

What substance would move from the cell?

The substance that will have to have a net movement out of the cell would need to first be in the cell. The only substances in the cell are water, starch, and glucose.

Water will be the most likely substance to have a net movement out of the cell thanks to the process of osmosis which allows water molecules to move from an area of high concentration to an area of low concentration across a semi - permeable membrane. This happens until the concentration gradient is the same across the semi - permeable membrane.

The water in the cell is 90 % which means it is 5 % more than the 85 % water in the beaker. Water would therefore move out of the cell in a net movement until the concentration is the same in the beaker and the cell.

Find out more on movement out of cells at https://brainly.com/question/6843437

#SPJ1

Other Questions
hich of the following is a negative effect of extended cortisol release caused by chronic or prolonged stress? what is dependent demand? question 8 options: a) it originates from the external customer. b) there is a deep bill of material. c) the finished products are mostly services (rather than goods). d) the item has several children. e) the demand for one item is related to the demand for another item the compromise of 1850 included a much harsher fugitive slave law. it also included all of the following except Which of the following correctly describes NIMS? Which of the following is a potential new method of uniquely identifying a mobile device for fingerprinting?by analyzing Wi-Fi settingschecking cookieschecking HTTP headersby analyzing flaws in the sensors of a device in the republic, plato argues that the only kind of society that can ensure people get their due is a HELPPPPP (100 POINTS)Assume that the water stream is replaced by a stream of CCl4. Predict what would happen in each case.a. charged acetate strip:b. charged vinyl strip:c. Explain your predictions. a security clearance is a component of a data classification scheme that assigns a status level to systems to designate the maximum level of classified data that may be stored on it. false true Please help will mark brainiest!!!Which essential nutrient is often thought of as being bad because we often consume too much of it?A. proteinsB. fatsC. carbohydrates if the magnitude of the net force acting on the particle is f , how long does it take the particle to acquire its final velocity, 2v in the positive y direction? express your answer in terms of m , f , and v . if you use a numerical coefficient, use three significant figures. which stage of an acute infectious disease occurs between the time the organism begins to grow in the host and the appearance of disease symptoms? How do you write 10^ 6 in decimal form? Consumer goods firms such as Lancme often use reminder advertising to convince consumers to take actionswitch brands, try a new product, or even continue to buy the advertised product.TRUEFALSE Which of these quotations best expresses the central idea of "Revenge of the Geeks"?OA. For many,OB. Geeks profit from their technological know-how.OC. In the adult world, being out is in.OD. [Students] need to know before graduation that being different is not a problem but a strength.high school is the "first foray into the adult world where [kids] have to think about their own status." What was the Santa Fe Trail used for?; Which Western trail stretched 1000 miles from Illinois to Utah Territory the Mormon trail the Santa Fe Trail the California trail The Oregon Trail?; What was traded on the Santa Fe Trail?; Where did the Santa Fe Trail start?; Where was the Santa Fe Trail located?; What did the Oregon Trail and Santa Fe Trail have in common? in a randomsample, 10 students were asked to compute the distance they travel one way to school to the nearest tenth of a mile. the data is listed below. compute the coefficient of variation. Sprint charges different rates for long-distance service depending on time of day and distance of the call. This pricing method is called ____ pricing. White light (400-700 nm) incident on a 600 line/mm diffraction grating produces rainbows of diffracted light.What is the width of the first-order rainbow on a screen 2.0 m behind the grating? Question 3 (1 point)If you throw a ball straight up into the air, when is the potential energy the greatest?Half the distance on the path traveling up in the airWhen the ball reaches the highest point and stops brieflyHalf the distance on the path traveling back downRight before you catch it after it falls back downQuestion 4 (1 point) What data did the researchers collect, and how did they interpret those data?