A 1.5kg block slides along a frictionless surface at 1.3m/s . A second block, sliding at a faster 4.3m/s , collides with the first from behind and sticks to it. The final velocity of the combined blocks is 2.0m/s . What was the mass of the second block?

Answers

Answer 1

Answer:

The mass of the second block=0.457 kg

Explanation:

We are given that

m1=1.5 kg

v1=1.3m/s

v2=4.3 m/s

V=2.0 m/s

We have to find the mass of the second block.

[tex]m_1v_1+m_2v_2=(m_1+m_2)V[/tex]

Let m2=m

Substitute the values

[tex]1.5(1.3)+m(4.3)=(1.5+m)(2)[/tex]

[tex]1.95+4.3m=3+2m[/tex]

[tex]4.3m-2m=3-1.95[/tex]

[tex]2.3m=1.05[/tex]

[tex]m=\frac{1.05}{2.3}[/tex]

[tex]m=0.457 kg[/tex]

Hence,  the mass of the second block=0.457 kg


Related Questions

As a roller coaster car crosses the top of a 40-m-diameter loop-the-loop, its apparent weight (the normal force) is the same magnitude as the car's weight. What is the car's speed at the top?

Answers

Answer:

40 because if it is the same weight then there is no weight to make the ride slower so it 40

Explanation:

what is meant by specific latent heat of vaporization of water is -2.26mjkg^-1 or -2.26mj/kg?​

Answers

Answer:

The specific latent heat of a substance is the amount of energy required to change the state of one kilo of the substance without change in it temperature.The latent heat of vaporization or evaporation is the heat given to some mass to convert if from the liquid to the vapor phase.

If the accuracy in measuring the velocity of a particle increases, the accuracy in measuring its position will:__________.
a. It is impossible to say since the two measurements are independent and do not affect each other.
b. remain the same.
c. increase.
d. decrease.

Answers

When the accuracy in measuring the velocity of a particle increases, that of its position decreases. The correct option is d. decrease.

The Heisenberg's uncertainty principle states that there is always an uncertainty in any attempt to measure accurately the value of any two complementary variables simultaneously. This implies that measuring of position and momentum of a particle simultaneously would lead to uncertainty in their values.

So that;

Δx.ΔP ≥ [tex]\frac{h}{2\pi }[/tex]

Where Δx is the uncertainty in the value of its position, ΔP is the uncertainty in the value of momentum and h is the Planck's constant.

This principle simply explains and provides the required answer to the given question. So that according to Heisenberg's uncertainty principle, the accuracy in measuring its position will definitely decrease.

Please check: https://brainly.com/question/23884256

What is the name of the compound br8P4

Answers

Answer:

Octabromine tetraphosphide

Explanation:

This compound has in its formula:

- Eight bromines

- Four phosphorous

8 → octa prefix

4 → tetra prefix

Right answer is Octabromine tetraphosphide

A kind of variable that a researcher purposely changes in investigation is

Answers

Answer:

independent variable

Explanation:

Choose the appropriate explanation how such a low value is possible given Saturn's large mass - 100 times that of Earth.

a. This low value is possible because the magnetic field of Saturn is so strong.
b. This low value is possible because the magnetic field of Saturn is so weak.
c. This low value is possible because the density of Saturn is so high.
d. This low value is possible because the density of Saturn is so low.

Answers

Answer:

Explanation:

That is an amazing fact.

The minus sign is what you have to pay attention to. The earth has a mass of 100 times that of Saturn. As someone on here once noted, Saturn has such a low density that it would float in water.

The answer is D

Which term defines seeking some way of achieving a goal by overcoming obstacles or finding an answer to a question?

Answers

Answer:

Problem solving

hope this helps :)

11. From this lab we can conclude that a) the heat transferred when objects are rubbed together creates an energy that can cause objects to move towards or away from each other. b) objects such as balloons and sweaters have a natural affinity towards each other. They will attract each other whether they are rubbed together or not. c) charges exert forces on other charges. do) charges do not exert forces on other charges.

Answers

Answer:

c) charges exert forces on other charges.

Explanation:

When two different materials are rubbed together, there is a transfer of electrons from one material to the other material so this causes one object to become positively charged and the other object is negatively charged so they will attract each other not repel each other. Charges exert forces on other charges i.e. opposite charges attract each other whereas similar charges repel each other so in both cases force are exerted on one another.


what is science ? what qualities do we deal in deal in physic ? ​

Answers

science is all about the world around us

A smooth circular hoop with a radius of 0.400 m is placed flat on the floor. A 0.325-kg particle slides around the inside edge of the hoop. The particle is given an initial speed of 8.50 m/s. After one revolution, its speed has dropped to 5.50 m/s because of friction with the floor.
(a) Find the energy transformed from mechanical to internal in the particle "hoop" floor system as a result of friction in one revolution.
(b) What is the total number of revolutions the particle makes before stopping? Assume the friction force remains constant during the entire motion.

Answers

Answer:

a)  W = - 6.825 J,  b) θ = 1.72 revolution

Explanation:

a) In this exercise the work of the friction force is negative and is equal to the variation of the kinetic energy of the particle

         W = ΔK

         W = K_f - K₀

          W = ½ m v_f² - ½ m v₀²

         W = ½ 0.325 (5.5² - 8.5²)

         W = - 6.825 J

b) find us the coefficient of friction

Let's use Newton's second law

            fr = μ N

y-axis (vertical)   N-W = 0

            fr = μ W

work is defined by

             W = F d

the distance traveled in a revolution is

             d₀ = 2π r

             W = μ mg d₀ = -6.825

            μ = [tex]\frac{ -6.825}{d_o \ mg}[/tex]

               

The total work as the object stops the final velocity is zero v_f = 0

         W = 0 - ½ m v₀²

          W = - ½ 0.325 8.5²

          W = - 11.74 J

           μ mg d = -11.74

           

we subtitle the friction coefficient value

           ( [tex]\frac{-6.8525 }{d_o mg}[/tex]) m g d = -11.74

               6.825  [tex]\frac{d}{d_o}[/tex] = 11.74

               d = 11.74/6.825  d₀

               d = 1.7201  2π 0.400

               d = 4.32 m

this is the total distance traveled, the distance and the angle are related

              θ = d / r

              θ = 4.32 / 0.40

              θ = 10.808 rad

we reduce to revolutions

              θ = 10.808 rad (1rev / 2π rad)

              θ = 1.72 revolution

If Light is travels from air into pure water with an incident angle of 30°. What is the angle of refraction?

Answers

Explanation:

For air, n1 = 1.00003; for water, n2 = 1.3330

Given: θ2 = 30 degrees, then

θ1 = arcsin [(n2/n1) sin θ2]

= arcsin [(1.3330/1.0003) sin (40)]

= 58.93 degrees

Note that since, in this example, light is traveling from a medium of higher density (water; n2 = 1.3330) to a medium of lower density (air; n1 = 1.0003), then n2 > n1, and the angle of refraction (θ1) is larger than the angle of incidence (θ2), thus the light bends away from the normal (in this example, the vertical) as it leaves the water and enters the air.

basic source of magnetism is a) charged particles alone b)Movement of charged particles c) Magnetic dipoles d)magnetic domains ​

Answers

Answer:

C . Magnetic dipoles is the correct

Answer:

b). movement of charged particles.

Explanation:

These charges create the nagnetic dipoles.

Two loudspeakers, 5.5 m apart and facing each other, play identical sounds of the same frequency. You stand halfway between them, where there is a maximum of sound intensity. Moving from this point toward one of the speakers, you encounter a minimum of sound intensity when you have moved 0.25 m . Assume the speed of sound is 340 m/s.

Required:
a. What is the frequency of the sound?
b. If the frequency is then increased while you remain 0.21 m from the center, what is the first frequency for which that location will be a maximum of sound intensity?
c.

Answers

Solution :

Let [tex]$d_1=\frac{5.5}{2}[/tex]

          = 2.75 m

[tex]d_2 = 0.21 \ m[/tex]

And [tex]$d=|d_1-d_2|$[/tex]

       [tex]$d=(d_1+d_2) - (d_1-d_2)$[/tex]

       [tex]$d=(2.75+0.21) - (2.75-0.21)$[/tex]

       [tex]$d = 2.96-2.54$[/tex]

       [tex]d = 0.42 \ m[/tex]

a). At minimum,

[tex]$d=\frac{\lambda}{2}$[/tex]

[tex]$\lambda = 2d$[/tex]

  = 2 x 0.42

  = 0.84 m

Frequency, [tex]$\nu = \frac{v}{\lambda}$[/tex]

                      [tex]$=\frac{340}{0.84}$[/tex]

                      = 404.76 Hz

Therefore, the frequency of he sound, [tex]$\nu$[/tex] = 404.76 Hz

b). At maximum, λ = d = 0.42 m

Therefore, the frequency, [tex]$\nu = \frac{v}{\lambda}[/tex]

                                             [tex]$=\frac{350}{0.42}$[/tex]

                                             = 809.52 Hz

Convert 385k to temperature of

Answers

Answer:

233.33°F

Explanation:

(385K - 273.15) * 9/5 + 32 = 233.33°F

What improvements were made in measuring system with the introduction of standard units?​

Answers

Answer:

Standard units are commonly used units of measurement, which help us measure length, height, weight, temperature, mass and more. These units are standardised, which means that everyone gets the same understanding of the size, weight and other properties of objects and things.

Explanation:

Calculate the electric field at point A, located at coordinates (0 m, 12.0 m ). Give the x and y components of the electric field as an ordered pair. Express your answer in newtons per coulomb to three significant figures.

Answers

Answer:

The correct answer is "[tex](0,300\times 10^{-3} \ N/C)[/tex]".

Explanation:

The given problem seems to be incomplete. Please find the attachment of the complete query.

According to the question,

At point A, we have

⇒ [tex]E_x = \frac{k q_1}{d_1^2} Cos \theta_1 - \frac{k q_2}{d_2^2} Cos \theta_2[/tex]

or,

⇒ [tex]E_x = 9\times 10^9\times [\frac{6\times 10^{-9}}{15^2}\times \frac{9}{15}-\frac{8\times 10^{-9}}{20^2}\times \frac{16}{20} ][/tex]

         [tex]=0[/tex]

and,

⇒ [tex]E_y = \frac{kq_1}{d_1^2}Sin \theta_1 +\frac{kq_2}{d_2^2}Sin \theta_2[/tex]

or,

⇒ [tex]E_y = 9\times 10^9\times [\frac{6\times 10^{-9}\times 12}{15^2\times 15}+ \frac{8\times 10^{-9}\times 12}{20^2\times 20} ][/tex]

         [tex]=0.3 \ N/C[/tex]

A particle moves along X-axis in such a way that X-coordinate varies with time according to expression x= 2-5t+6t2 meters, Calculate the initial velocity of the particle?

Answers

A  5

v=  dt/ dx  =−5+12t

Initial velocity means at t=0, which is −5+0=−5.

Thus, −v=5n

As the speed of a particle approaches the speed of light, the momentum of the particle Group of answer choices approaches zero. decreases. approaches infinity. remains the same. increases.

Answers

Answer:

approaches infinity

Explanation:

There are two momentums, the classical momentum which is equal to the product of mass and velocity, and the relativistic momentum, the one we should look at when we work with high speeds, and this happens because massive objects have a speed limit, in this case, we are approaching the speed of light, so we need to work with the relativistic momentum instead of the classical momentum.

The relativistic momentum can be written as:

[tex]p = \frac{1}{\sqrt{1 - \frac{u^2}{c^2} } } *m*u[/tex]

where

u = speed of the object relative to the observer, in this case we have that u tends to c, the speed of light.

m = mass of the object

c = speed of light.

So, as u tends to c, we will have:

[tex]\lim_{u \to c} p = \frac{1}{\sqrt{1 - \frac{u^2}{c^2} } } *m*u[/tex]

Notice that when u tends to c, the denominator on the first term tends to zero, thus, the relativistic momentum of the object will tend to infinity.

Then the correct option is infinity, as the particle speed approaches the speed of light, the relativistic momentum of the particle tends to infinity.

Which of the following statements about magnetism is TRUE?
a) The direction of the magnetic force on a current-carrying wire is parallel to the wire.
b) Magnetic poles always occur in pairs (N and S).
c) Magnetic field lines begin at south poles and end on north poles.
d) Moving charges do not experience a force in magnetic fields.

Answers

(B) option magnetic poles always occur in pairs (N andS ).

A rocket explodes into two fragments, one 25 times heavier than the other. The magnitude of the momentum change of the lighter fragment is A) 25 times as great as the momentum change of the heavier fragment. B) The same as the momentum change of the heavier fragment. C) 1/25 as great as the momentum change of the heavier fragment. D) 5 times as great as the momentum change of the heavier fragment. E) 1/4 as great as the momentum change of the heavier fragment.

Answers

Answer:

B) The same as the momentum change of the heavier fragment.

Explanation:

Since the initial momentum of the system is zero, we have

0 = p + p' where p = momentum of lighter fragment = mv where m = mass of lighter fragment, v = velocity of lighter fragment, and p' = momentum of heavier fragment = m'v' where m = mass of heavier fragment = 25m and v = velocity of heavier fragment.

0 = p + p'

p = -p'

Since the initial momentum of each fragment is zero, the momentum change of lighter fragment Δp = final momentum - initial momentum = p - 0  = p

The momentum change of heavier fragment Δp' = final momentum - initial momentum = p' - 0 = p' - 0 = p'

Since p = -p' and Δp = p and Δp' = -p = p ⇒ Δp = Δp'

So, the magnitude of the momentum change of the lighter fragment is the same as that of the heavier fragment.  

So, option B is the answer

if a projectile travels in the air for 6 seconds when does the projectile reach its highest point

Answers

This question deals with projectile motion, which is a motion on both the x-axis and y-axis, simultaneously. The total time of flight of the projectile trajectory is given, while the time to reach the highest point of the projectile is required to be found.

The projectile will reach the highest point in "3 seconds".

The total time of flight of a projectile is the time during which the projectile remains in the air. For a projectile motion that ends up on the same horizontal level, from where it started, the time to reach the highest point, is equal to half of the total time of flight.

In other words, the projectile motion takes the same time, to go from the starting level to the highest point (i.e upward motion), as the time taken to reach the starting level from the highest point (i.e downward motion).

[tex]t = \frac{1}{2}T[/tex]

where,

t = time to reach the highest point = ?

T = total time of flight = 6 seconds

Therefore,

[tex]t - \frac{1}{2}(6\ seconds)[/tex]

t = 3 seconds

Learn more about the projectile motion here:

https://brainly.com/question/20689870?referrer=searchResults

Suppose a teenager on her bicycle. The rear wheel is spinning at an angular velocity of 281.133 rpm. She stops it in 3.686 s. How many revolution did it take to stop it?

Answers

Answer:

Explanation:

The formula for angular velocity is

[tex]\omega=\frac{\theta}{t}[/tex] where omega is the angular velocity, theta is the change in the angular rotation, and t is the time in seconds. First and foremost, we have the angular rotation in minutes and the time in seconds, so that's a problem we have to amend. Let's change the angular rotation to rotations per second:

[tex]281.133\frac{r}{min}*\frac{1min}{60s}=4.68555\frac{r}{s}[/tex]

Now we're ready to set up the problem:

[tex]4.68555=\frac{\theta}{3.686}[/tex] and we multiply both sides by 3.686 to get the rotations per seconds:

θ = 17.27 rotations

If a wave has to travel 600m and it’s wavelength is 0.4 m , with a frequency of 500Hz. How much time will it take for the wave to travel 600m ?

Answers

Velocity of wave = wavelength x frequency
v = (0.4 m)(500 Hz)
v = 200 m/s

v = d/t
t = d/v
t = (600m)/(200m/s)
t = 3s

A ring with an 18mm diameter falls off a scientist's finger into the solenoid in the lab. The solenoid is 25 cm long, 5.0 cm in diameter and has 1500 turns. When turned on, the current in the solenoid is increases linearly to 20 A in 1 second. What is the induced emf in the ring?
a) 2.0 x 10-5 v
b) 3.8 x 10-5 v
c) 1.2 x 10-3 v
d) 1.9 x 10-4 v

Answers

Answer:

the answer should be b) 3.8 x 10-5 v

Two resistances, R1 and R2, are connected in series across a 12-V battery. The current increases by 0.500 A when R2 is removed, leaving R1 connected across the battery. However, the current increases by just 0.250 A when R1 is removed, leaving R2 connected across the battery.
(a) Find R1.
Ω
(b) Find R2.
Ω

Answers

Answer:

a)   R₁ = 14.1 Ω,   b)  R₂ =  19.9 Ω

Explanation:

For this exercise we must use ohm's law remembering that in a series circuit the equivalent resistance is the sum of the resistances

all resistors connected

           V = i (R₁ + R₂)

with R₁ connected

           V = (i + 0.5) R₁

with R₂ connected

           V = (i + 0.25) R₂

We have a system of three equations with three unknowns for which we can solve it

We substitute the last two equations in the first

           V = i ( [tex]\frac{V}{ i+0.5} + \frac{V}{i+0.25}[/tex] )

           1 = i ( [tex]\frac{1}{i+0.5} + \frac{1}{i+0.25}[/tex] )

           1 = i ( [tex]\frac{i+0.5+i+0.25}{(i+0.5) \ ( i+0.25) }[/tex] ) =  [tex]\frac{i^2 + 0.75i}{i^2 + 0.75 i + 0.125}[/tex]

           i² + 0.75 i + 0.125 = 2i² + 0.75 i

           i² - 0.125 = 0

           i = √0.125

           i = 0.35355 A

with the second equation we look for R1

          R₁ = [tex]\frac{V}{i+0.5}[/tex]

          R₁ = 12 /( 0.35355 +0.5)

          R₁ = 14.1 Ω

with the third equation we look for R2

          R₂ = [tex]\frac{V}{i+0.25}[/tex]

          R₂ =[tex]\frac{12}{0.35355+0.25}[/tex]

          R₂ =  19.9 Ω

What computer measures physical quantities?​

Answers

Answer:

Three Types of Computer The Computer are classified into three main types:: • Analog Computers • Digital Computers • Hybrid Computers (Analog + Digital) Analog Computers:: Analog Computer measures “Physical Quantities” for example Temperature, Voltage, Pressure, and Electric Current.

An electron is released from rest at a distance of 9.00 cm from a fixed proton. How fast will the electron be moving when it is 3.00 cm from the proton

Answers

Answer:

the  speed of the electron at the given position is 106.2 m/s

Explanation:

Given;

initial position of the electron, r = 9 cm = 0.09 m

final position of the electron, r₂ = 3 cm = 0.03 m

let the speed of the electron at the given position = v

The initial potential energy of the electron is calculated as;

[tex]U_i = Fr = \frac{kq^2}{r^2} \times r = \frac{kq^2}{r} \\\\U_i = \frac{(9\times 10^9)(1.602\times 10^{-19})^2}{0.09} \\\\U_i = 2.566 \times 10^{-27} \ J[/tex]

When the electron is 3 cm from the proton, the final potential energy of the electron is calculated as;

[tex]U_f = \frac{kq^2}{r_2} \\\\U_f = [\frac{(9\times 10^9)\times (1.602 \times 10^{-19})^2}{0.03} ]\\\\U_f = 7.669 \times 10^{-27} \ J \\\\\Delta U = U_f -U_i\\\\\Delta U = (7.699\times 10^{-27} \ J ) - (2.566 \times 10^{-27} \ J)\\\\\Delta U = 5.133 \times 10^{-27} \ J[/tex]

Apply the principle of conservation of energy;

ΔK.E = ΔU

[tex]K.E_f -K.E_i = \Delta U\\\\initial \ velocity \ of \ the \ electron = 0\\\\K.E_f - 0 = \Delta U\\\\K.E_f = \Delta U\\\\\frac{1}{2} mv^2 = \Delta U\\\\where;\\\\m \ is \ the \ mass \ of\ the \ electron = 9.1 1 \times 10^{-31} \ kg\\\\v^2 = \frac{ 2 \Delta U}{m} \\\\v = \sqrt{\frac{ 2 \Delta U}{m}} \\\\v = \sqrt{\frac{ 2 (5.133\times 10^{-27})}{9.11\times 10^{-31}}}\\\\v = \sqrt{11268.935} \\\\v = 106.2 \ m/s[/tex]

Therefore, the  speed of the electron at the given position is 106.2 m/s

Paramagnetism is closely associated with: A. the tendency of electron dipole moments to align with an applied magnetic field B. the force exerted by electron dipole moments on each other C. the exchange force between electrons D. the tendency of electron dipole moments to align opposite to an applied magnetic field

Answers

Answer:

the tendency of electron dipole moments to align with an applied magnetic field

Explanation:

Paramagnetism has to do with possession of unpaired electrons. Substances that possess unpaired electrons are said to be paramagnetic.

When an external magnetic field is applied to a paramagnetic substance, the magnetic field causes the electrons spins of the paramagnetic substance to align parallel to the field,which leads to a net attraction.

Hence, paramagnetism is closely associated with the tendency of electron dipole moments to align with an applied magnetic field.

HELP ME ASAP PLSSS!!​

Answers

I hope this helped !


Physics question plz help ASAP

Answers

The Correct answer is D Hope this helps :)
Other Questions
The spaceship Enterprise 1 is moving directly away from earth at a velocity that an earth-based observer measures to be 0.66c. A sister ship, Enterprise 2, is ahead of Enterprise 1 and is also moving directly away from earth along the same line. The velocity of Enterprise 2 relative to Enterprise 1 is 0.34c. What is the velocity of Enterprise 2, as measured by the earth-based observer Some argue that ____________ is actually in the long-term best interests of the corporation. This argument, referred to as ____________, is based on the notion that socially responsible corporations benefit by creating ____________ for themselves, thus motivating consumers to purchase their products, investors to buy their stock, and lawmakers to grant them further legal advantages. What is a representative sample, and why is it important? A submarine cruises underwater at 20 km/h and onthe surface at 30 km/h. The submarine travels a.distance of 650 km in 25 h. A linear system wascreated and graphed What changes needs to be made to sentence 15? In Biblical times, chariots and carts were widespread in the Middle East, but by the 6th century, the old Roman roads had deteriorated so much that wheeled vehicles were replaced by camels. This illustrates that the processes of change is sometimes due to ___. Group of answer choices primary innovation revitalization secondary innovation cultural loss Which is an example of a demander of U.S. currency? Foreign firms that have sold imported goods in the United States, earned U.S. dollars, and are trying to pay expenses incurred in their home countries Foreign investors who wish to make direct investments in the United States economy U.S. tourists leaving to visit other countries U.S. investors who want to make foreign direct investments in other countries U.S. exporting firms that earned foreign currency and are trying to pay U.S.-based expenses What are the units of molar mass?A. L/gB. mol/gC. g/LD. g/molSUBST Determine the degree of the term 2^3x2yz4 Hi I need help could someone please help me Manuel Tores, a senior manager at Crawford Export Logistics, goes to France to negotiate a deal with the company's French partners. He dresses casually in a t-shirt and jeans. His French counterparts call off the meeting and accuse him of taking a casual attitude toward negotiations. In this scenario, dressing formally during business meetings is probably a cultural ________ for the French. Optimization helps:_______.(a) in identifying the constraints of the situation. (b) to find good decisions in highly complex and highly uncertain settings. (c) in assigning values to outcomes. (d) to model certainty with optimization techniques. Select the best answer to describe the parabola Cmo puedo pasar esta oracin afirmativa a interrogativa es "At six o'clock, Mirian and her family had dinner xf According to a recent survey, the growth of facility investment tends to fall _________ there is a presidential election.A. whichB. in order thatC. whenD. on behalf of At a ski resort located over one hour from the nearest large town, there is only one grocery store and it charges prices more than 200% percent above the typical retail prices. In the long run, we would expect that: Group of answer choices demand will decrease since people will not want to pay the high prices. another store will open that will charge lower prices. another store will open that will charge equally high prices since competition is low. the store will continue to earn high profits even in the long run since the size of the market is small. explain the relationship among health, population and environment education in your own words? Will give brainliestA tablet at a local electronics store is in high demand and will only be available to customers for a limited time. The store initially has 4 cases of the tablet on hand. The store manager receives new supplies of the tablet each week. At the beginning of week 1, the store manager receives an additional order from the distributor of 5 cases of tablets. At the beginning of week 6, the manager receives another order of 10 cases. Which of the following equations best models the scenario for how many cases of the tablet the store can expect to receive each week? a. y=4b. y=x+4c. y=-6x WILL GIVE BRAINLIST IF CORRECT Which function is represented by this graph From the diagram below, you can say that the two triangles areSelect one: Congruent by SASNot Congruent Congruent by HLCongruent ASA