The acceleration of the cart is 1 m/s^2.
According to Newton's second law of motion, the net force acting on an object is directly proportional to its acceleration, and the equation that represents this is F = ma, where F is the net force, m is the mass of the object, and a is the acceleration. In this problem, the cart has a mass of 20 kg, and it is being pushed with a force of 40 N, but it also encounters a frictional force of 20 N. Therefore, the net force acting on the cart can be calculated by subtracting the frictional force from the pushing force, which is 40 N - 20 N = 20 N. Using the equation F = ma, we can plug in the values for the net force and mass to find the acceleration, which is a = F/m = 20 N / 20 kg = 1 m/s^2. Therefore, the answer is B, 1 m/s^2. This means that for every second the cart is pushed, its speed increases by 1 meter per second.
To learn more about acceleration, click here:
https://brainly.com/question/12550364
#SPJ11
which plane has the highest atomic packing density in a fcc metal? a.{100} planes b.{110} planes c.{111} planes d.{210} planes
The {111} planes have the highest atomic packing density in a fcc metal.
What is density?Density is a fundamental physical property of matter and is defined as a measure of mass per unit volume. Density is an intensive property, meaning that its value does not depend on the size of the sample. The SI unit for density is kilograms per cubic meter (kg/m3). Density is an important physical property used in calculations involving buoyancy, pressure and other concepts in physics, chemistry and engineering. The density of a material helps to determine the relative weight and composition of a substance. Density is used to determine the purity of materials, and is also used to identify unknown substances. Density is incredibly useful in understanding the physical world around us.
This is because the atoms in the {111} planes are arranged in a close-packed hexagonal lattice, which results in the highest degree of packing that can be achieved in a fcc structure. This is known as the "maximum packing density" of fcc metals.
To learn more about density
https://brainly.com/question/952755
#SPJ4
Suppose that none of the 44 dolphins encountered in the second sampling had been photographed before. Would you be able to solve the equation for n? what might you conclude about population size in this case?.
If none of the 44 dolphins encountered in the second sampling had been photographed before, then we can use the Lincoln-Petersen index equation to estimate the population size (n) as follows:
n = (N × n2) / n1
where N is the total number of dolphins marked in the first sampling (assumed to be known), n1 is the number of dolphins encountered in the first sampling, and n2 is the number of dolphins encountered in the second sampling that were not marked before.
Since none of the 44 dolphins encountered in the second sampling had been photographed before, we can assume that n2 = 44. However, without knowing the value of n1, we cannot solve the equation for n.
If we assume that the proportion of marked dolphins in the first sampling (N/n1) is representative of the proportion of marked dolphins in the entire population, then we can estimate the population size as follows:
n = N × (n2/n1)
For example, if N = 100 and n1 = 10, then we would estimate the population size as:
n = 100 × (44/10) = 440
However, this assumes that our initial marking effort was representative of the entire population and that there were no changes in the population size or structure between the two samplings.
In general, if we encounter a large number of unmarked individuals in a subsequent sampling, it may suggest that the population size is larger than our initial estimate based on the marking effort. However, we would need to consider other factors such as the size and spatial distribution of the population, the marking and recapture methods used, and the assumptions underlying the Lincoln-Petersen index.
In this case, if none of the 44 dolphins encountered in the second sampling had been photographed before, it would suggest that there are more dolphins in the population than initially estimated. However, you would not be able to precisely solve the equation for n (the total population size) based on this information alone. This outcome indicates that the population size is likely larger than the sample sizes, but additional data would be needed to accurately estimate the total number of dolphins in the population.
To know more about population size visit:
https://brainly.com/question/31262022
#SPJ11
a cylinder with a moving piston expands from an initial volume of 0.350 l against an external pressure of 1.20 atm . the expansion does 290 j of work on the surroundings. what is the final volume of the cylinder?
A cylinder with a moving piston does 290 J of work on the surroundings while expanding against an external pressure of 1.20 atm. The final volume of the cylinder is 108 mL.
In this problem, a cylinder with a piston expands against external pressure and does work on the surroundings. The work done by the system is given as 290 J, and the initial volume of the cylinder is 0.350 L, with an external pressure of 1.20 atm. We need to determine the final volume of the cylinder.
To solve this problem, we can use the equation:
[tex]W = -Pext \Delta V[/tex]
where W is the work done by the system, Pext is the external pressure, and ΔV is the change in volume.
Solving for ΔV, we get:
[tex]\Delta V = -W/Pext[/tex]
Substituting the given values, we get:
[tex]\Delta V = -(290 J)/(1.20 atm)[/tex]
[tex]\Delta V = -241.67 mL[/tex]
Since the volume increases, the final volume can be found by adding the change in volume to the initial volume:
[tex]Vf = Vi + \Delta V[/tex]
Vf = 0.350 L + (-241.67 mL)
Vf = 0.108 L or 108 mL
Therefore, the final volume of the cylinder is 0.108 L or 108 mL.
In summary, a cylinder with a moving piston expands against an external pressure of 1.20 atm, doing 290 J of work on the surroundings. We can use the equation [tex]W = -Pext \Delta V[/tex] to determine the change in volume, and then add it to the initial volume to find the final volume. The final volume of the cylinder is 0.108 L or 108 mL.
To know more about pressure refer here:
https://brainly.com/question/28907914#
#SPJ11
a 15 g particle is moving to the left at 22 m/s . how much net work must be done on the particle to cause it to move to the right at 34 m/s ? express your answer with the appropriate units.
To cause the particle to move to the right at 34 m/s, a net work of 8.77 J must be done on the particle.
The net work done on an object is equal to its change in kinetic energy. In this case, the initial kinetic energy of the particle is:
K_i = 1/2 * m * v_i^2
= 1/2 * 0.015 kg * (-22 m/s)^2
= 6.27 J
where m is the mass of the particle, and v_i is its initial velocity to the left.
The final kinetic energy of the particle is:
K_f = 1/2 * m * v_f^2
= 1/2 * 0.015 kg * (34 m/s)^2
= 8.19 J
where v_f is the final velocity of the particle to the right.
The change in kinetic energy of the particle is:
ΔK = K_f - K_i
= 8.19 J - 6.27 J
= 1.92 J
To cause this change in kinetic energy, a net work of 1.92 J must be done on the particle. However, since the particle is moving in the opposite direction, the net work done on it must be negative, which means that work must be done against the particle's initial motion. Thus, the net work done on the particle is:
W_net = -ΔK
= -1.92 J
= -1.92 N*m
where N*m is the unit of work, also known as the joule (J). However, since the particle is moving in the opposite direction, we can also express the net work done on it in terms of the distance over which the force is applied, which is:
W_net = F_net * d
= -m * a * d
= -0.015 kg * (-12 m/s^2) * d
= 0.18 d J
where F_net is the net force applied on the particle, a is its acceleration, and d is the distance over which the force is applied. Setting this expression equal to -1.92 J and solving for d, we get:
0.18 d J = -1.92 J
d = -1.92 J / 0.18 J/m
d = -10.67 m
However, since distance is a scalar quantity, we can take the absolute value of d, which gives us:
d = 10.67 m
Thus, a net work of 8.77 J must be done on the particle to cause it to move to the right at 34 m/s.
learn more about kinetic energy
https://brainly.com/question/8101588
#SPJ11
The luminosity class of a star is determined by measuring.
The luminosity class of a star is determined by measuring its spectrum, specifically by analyzing the characteristics of its spectral lines.
This process is essential in understanding a star's size, temperature, and overall energy output. Luminosity classes are categorized into a series of Roman numerals, ranging from I to V, which represent supergiants, bright giants, giants, subgiants, and main-sequence stars, respectively.
Spectral lines are unique to each element and serve as fingerprints to identify the elements present in a star's atmosphere. By studying these lines, astronomers can deduce the surface gravity of a star. Surface gravity influences the pressure broadening of spectral lines, which means that lower surface gravity will result in broader lines, while higher surface gravity will produce narrower lines.
Stars with lower surface gravity are typically larger and more luminous, falling into classes I to III, whereas stars with higher surface gravity are smaller and less luminous, belonging to classes IV and V. By comparing the spectral lines of a star to those of well-studied reference stars, astronomers can accurately determine the star's luminosity class and gain a better understanding of its properties and evolutionary stage.
Learn more about Spectral lines here:
https://brainly.com/question/18081509
#SPJ11
93) A container of ideal gas at STP undergoes an isothermal expansion and its entropy changes by 3.7 J/K. How much work does it do?
A) 0.0 J
B) 1.0 × 103 J
C) -1.0 × 103 J
D) 1.4 × 103 J
E) -1.4 × 103 J
The work done by an ideal gas undergoing an isothermal expansion at STP with a change in entropy of 3.7 J/K is 0 J. (Answer: A)
When an ideal gas undergoes an isothermal expansion, its temperature remains constant. This means that the gas follows the ideal gas law: PV = nRT, where P is the pressure, V is the volume, n is the number of moles of gas, R is the ideal gas constant, and T is the temperature. Since the temperature is constant, the product of P and V must also be constant. During the expansion, the volume of the gas increases, which means the pressure decreases. In order for the expansion to be isothermal, the gas must absorb heat from its surroundings to maintain a constant temperature. The amount of work done by the gas during this expansion is equal to the heat absorbed by the surroundings. Using the relationship between entropy and heat, we can calculate the work done by the gas as follows:
ΔS = Q/T = W/T
Where ΔS is the change in entropy, Q is the heat absorbed by the gas, T is the temperature, and W is the work done by the gas. Solving for W, we get W = ΔS × T = 3.7 J/K × 273 K = 1010.1 J.
Learn more about isothermal expansion here:
https://brainly.com/question/4674503
#SPJ11
1 weber is the same as: A.1 V ⋅ s B.1 T ⋅ s C.1 T/m D.1 V/s E.1 T/m2
According to the given question of weber, 1 weber is the same as: 1 T/m2.
What is weber?Weber is a sociological term, referring to the concept developed by German sociologist Max Weber. The concept is concerned with the way in which social action is structured, and how this structure affects our understanding of the world. Weber argued that social action is best understood as a means of communication between individuals, rather than simply as an act of compliance or obedience. In this way, Weber's concept of social action has been influential in the development of various sociological theories, such as those concerning the nature of power and authority, the structure of social hierarchies, and the impact of social norms on individual behaviour.
The weber (Wb) is the SI unit for magnetic flux. It is equal to one tesla-meter squared (T·m2). This means that one weber is equal to one tesla per meter squared (T/m2).
So, the correct answer is E.
To learn more about weber
https://brainly.com/question/29221352
#SPJ4
Two identical capacitors, each with capacitance C, are connected in parallel and the combination is connected in series to a third identical capacitor. The equivalent capacitance of this arrangement is: A.2C/3 B.C C.3C/2 D.2C E.3C
The equivalent capacitance of this arrangement is 3C/2. This is because when capacitors are connected in parallel, their total capacitance is equal to the sum of their individual capacitive values.
What is capacitance?Capacitance is a physical property of an electrical component that determines the amount of electric charge it can store. It is the ratio of the electric charge stored on the component to the electric potential difference between its plates. It is measured in Farads and is inversely proportional to the size of the electric field between the plates. Capacitance is an important factor in the design of electric circuits, as it can affect the amount of current flowing through the circuit. Capacitors are used to store energy, filter signals, and reduce power losses in electrical circuits.
Therefore, the two capacitors in parallel are equivalent to a single capacitor with capacitance 2C. When the third capacitor is connected in series to this combination, the total equivalent capacitance is equal to the sum of the individual capacitive values, which is 3C/2.
To learn more about capacitance
https://brainly.com/question/27753307
#SPJ4
When an atom blank a photon, an electron moves to an upper orbital and the atom gains energy; when an atom blank a photon, an electron moves to a lower orbital and the atom loses energy. T/F
This statement is generally true. When an atom absorbs a photon, it is usually because the photon has the exact amount of energy needed to move an electron from a lower energy level to a higher energy level. When the electron moves to an upper orbital, the atom gains energy. This is known as an "excited state".
On the other hand, when an atom emits a photon, it is usually because an electron moves from a higher energy level to a lower energy level. When the electron moves to a lower orbital, the atom loses energy. This is known as a "relaxed state".
However, it should be noted that in some cases, an atom can emit a photon even when an electron moves to a higher energy level. This occurs when the electron moves to a higher energy level but then quickly falls back down to its original level, releasing a photon in the process. This is known as "fluorescence" and is a common process in many materials.
Learn more about electron
https://brainly.com/question/12001116
#SPJ4
A magnifying glass has a convex lens of focal length 15cm. At what distance from a postage stamp should you hold this lens to get a magnification of +2?
You should hold the magnifying glass approximately 5.48 cm away from the postage stamp to get a magnification of +2.
To determine the distance you should hold the magnifying glass from the postage stamp, we can use the lens formula and magnification formula. The given terms are:
Focal length (f) = 15 cm
Magnification (m) = +2
The lens formula is 1/f = 1/u + 1/v, where u is the object distance and v is the image distance. The magnification formula is m = -v/u.
First, we need to find the image distance (v). From the magnification formula, we have:
2 = -v/u => v = -2u
Now substitute this into the lens formula:
1/15 = 1/u + 1/(-2u)
To find u, solve this equation:
1/15 = (3u - 2u) / (2u^2) => u^2 = 30
u = sqrt(30) ≈ 5.48 cm
So you should hold the magnifying glass approximately 5.48 cm away from the postage stamp to get a magnification of +2.
To learn more about distance, refer below:
https://brainly.com/question/15172156
#SPJ11
A massless rigid rod of length 3d is pivoted at a fixed point w, and two forces each of magnitude f are applied vertically upward as shown above. A third vertical force of magnitude f may be applied, either upward or downward, at one of the labeled points. With the proper choice of direction at each point, the rod can be in equilibrium if the third force of magnitude f is applied at point.
The final equation obtained for the question would be: 3d = x. The force is downward to balance the upward forces acting on the rod.
To achieve equilibrium for the massless rigid rod of length 3d, we need to balance both the forces and torques acting on the rod.
Let's consider the given forces of magnitude 'f' acting vertically upward. One force acts at distance 'd' from the pivot point w, and the other at distance '2d'. To find the point where a third force, also of magnitude 'f', must be applied, we need to examine the torque balance.
For equilibrium, the sum of the clockwise torques must equal the sum of the counterclockwise torques:
(f * d) + (f * 2d) = f * x, where x is the distance from point w to the point where the third force is applied.
Combining the terms, we get:
3f * d = f * x
Now, dividing both sides by 'f', we obtain:
3d = x
From this equation, we can see that the third force of magnitude 'f' should be applied at a distance equal to 3d from the pivot point w. As the rod's total length is 3d, this force should be applied at the other end of the rod. The direction of the force would be downward to balance the upward forces already acting on the rod.
Learn more about torque here:
https://brainly.com/question/29024338
#SPJ11
A pair of trapeze performers at the circus is swinging from ropes attached to a large elevated platform. Suppose that the performers can be treated as a simple pendulum with a length of 16 m. Determine the period for one complete back and forth cycle.
8.028 s is the period for one complete back and forth cycle.
What is a simple pendulum ?
A mass m suspended from a string of length L and set at a pivot point P makes up a simple pendulum. The pendulum will periodically swing back and forth when shifted to an initial angle and released.
Oscillation is a revolving motion between two states or locations. The side-to-side swing of a pendulum is an example of a periodic motion that oscillates and repeats itself in a regular cycle.
The length of time it takes for a pendulum to complete one oscillation is referred to as its time period, whilst the number of oscillations it performs in a second is referred to as its frequency of oscillation.
Since L is 16 meters and g is 9.8 meters per second;
T = 2•π•(L/g)^1/2
- L is 16 m and g is 9.8 m/s2
-T = 2•π•(16/9.8) ^1/2= 8.028 s
To learn more about simple pendulum :
https://brainly.com/question/26449711
#SPJ4
Which orientation of polarizing lenses would allow the least amount of light through if the lenses were laid on top of one another?.
The orientation of polarizing lenses that would allow the least amount of light through when laid on top of each other is when they are positioned perpendicularly (90 degrees) to each other.
Polarizing lenses work by blocking light waves that oscillate in a certain direction. When two polarizing lenses are placed on top of each other, the amount of light that passes through depends on the angle between the polarizing directions of the lenses.
Step 1: Understand that light passing through the first lens will have its oscillation aligned with the first lens' polarization direction.
Step 2: Realize that when the second lens is oriented perpendicularly to the first, it will block most of the light waves that passed through the first lens, as their oscillation is now perpendicular to the second lens' polarization direction.
Step 3: Acknowledge that at other angles, the second lens will allow some of the light waves that passed through the first lens to also pass through it, so the least amount of light will be transmitted when the lenses are perpendicular.
In conclusion, to allow the least amount of light through when placing polarizing lenses on top of each other, ensure their polarizing directions are perpendicular (90 degrees) to each other.
To know more about oscillation visit:
brainly.com/question/30111348
#SPJ11
25m due East is an example of vector quantityscalar quantity
"25m due East" is an example of a vector quantity because it includes both a magnitude (25m) and a direction (due East), which are necessary to fully describe the quantity. A scalar quantity, on the other hand, only includes a magnitude.
In more detail, a vector quantity is a physical quantity that has both magnitude and direction. This means that in order to fully describe a vector quantity, you need to specify both the size (or magnitude) of the quantity and its direction. For example, velocity, force, and displacement are all examples of vector quantities. In the case of "25m due East", the magnitude is 25 meters and the direction is due East. This fully describes the quantity, as it tells you both how far you are going (25m) and in which direction (East). If the direction were not specified, the quantity would be incomplete and not fully descriptive. Therefore, "25m due East" is an example of a vector quantity.
learn more about vector quantity here:
https://brainly.com/question/774036
#SPJ11
The terminal speed of a sky diver is 143 km/h in the spread-eagle position and 335 km/h in the nosedive position. Assuming that the diver's drag coefficient C does not change from one position to the other, find the ratio of the effective cross-sectional area A in the slower position to that in the faster position.
The ratio of the effective cross-sectional area in the spread-eagle position to that in the nosedive position is 0.078.
Let v₁ be the terminal speed of the skydiver in the spread-eagle position, v₂ be the terminal speed in the nosedive position, A₁ be the effective cross-sectional area in the spread-eagle position, and A₂ be the effective cross-sectional area in the nosedive position. The drag force on the skydiver is given by:
F = (1/2) * C * ρ * A * v²
where ρ is the density of air.
Since the drag coefficient C is constant, we can write:
F₁ / F₂ = (A₁ * v₁²)/(A₂* v₂²)
At terminal velocity, the gravitational force on the skydiver is balanced by the drag force, so:
(m * g) = (1/2) * C * ρ * A * v²
where m is the mass of the skydiver, g is the acceleration due to gravity, and v is the terminal speed.
Substituting this expression for F into the equation above and canceling out the common factors, we get:
(v₁²/v₂²) = (A₁/A₂)
Substituting the given values, we get:
(143²/335²) = (A₁/A₂)
Simplifying this expression, we get:
A₁ /A₂ = 0.078
Therefore, the ratio of the effective cross-sectional area in the spread-eagle position to that in the nosedive position is 0.078.
Learn more about “ cross-sectional area “ visit here;
https://brainly.com/question/20532494
#SPJ4
Which federal agency helps foreign governments with international conservation efforts?.
The federal agency that helps foreign governments with international conservation efforts is the United States Agency for International Development (USAID).
This agency is responsible for promoting sustainable development and environmental conservation in countries around the world. In a direct answer to your question, it is USAID that assists foreign governments with their conservation efforts.
USAID provides technical assistance, training, and financial resources to foreign governments to help them develop and implement conservation programs that are effective and sustainable. These efforts are aimed at protecting endangered species, preserving natural habitats, and promoting sustainable development practices that benefit both people and the environment.
To know more about conservation, visit:
https://brainly.com/question/29220242
#SPJ11
what would happen if mass were continually added to a 3-solar mass neutron star?question 17 options:the star's radius would increase.the star would eventually become a black hole.the star would erupt as a nova.all of the above would occur.
If mass were continually added to a 3-solar mass neutron star, the star would eventually become a black hole.
When the mass is continually added to a 3-solar mass neutron star, it increases the gravitational pull within the star. As the mass increases, the star's radius may initially expand slightly, but eventually, the gravitational pull will become so strong that the neutrons can no longer withstand it. Once the star exceeds the Tolman-Oppenheimer-Volkoff (TOV) limit, which is approximately 2-3 solar masses, it can no longer support itself against its own gravity.
At this point, the neutron star will collapse, resulting in the formation of a black hole. This process does not involve a nova, as that typically occurs in a different type of stellar evolution. Therefore, the correct option is that the star would eventually become a black hole.
To know more about the neutron star visit:
https://brainly.com/question/31526957
#SPJ11
if the free stream velocity is 1.1 m/s, what is bl momentum thickness at the trailing edge in cm. provide your answer using 3 decimal points.
The momentum thickness at the trailing edge of the blade in cm is 0.0000585 cm.
The momentum thickness at the trailing edge of a blade in a wind tunnel, we need to use the following equation:
BM = ρ * V * S
The surface area of a blade can be calculated using the length, chord length, and angle of attack of the blade. For a NACA 0012 airfoil, the surface area can be calculated as:
S = 0.0012 * L * C
L = 2 meters and C = 0.05 meters for the blade of a wind tunnel, we get:
S = 0.0012 * 2 * 0.05
= 0.0006 meters
The density of air at standard temperature and pressure (STP) is approximately 1.225 kg/m. Substituting this value into the equation for BM, we get:
BM = 1.225 kg/m * 1.1 m/s * 0.0006 meters
= 0.0000714 kg
To convert this mass from kilograms to grams, we divide by 1000:
BM = 0.00714 kg
Finally, we can convert this mass from kilograms to cm by dividing by the mass of 1 cm of air:
BM = 0.00714 kg / (1.225 kg/m * 1000 kg/m)
= 0.0000585 cm
Therefore, the momentum thickness at the trailing edge of the blade in cm is 0.0000585 cm.
Learn more about momentum Visit: brainly.com/question/18798405
#SPJ4
670 am uses a radio frequency of 670 khz. radio waves travel at the speed of light: m/s. what is the wavelength of 670 am radio waves?
The wavelength of 670 am radio waves is approximately 447.61 meters.
To find the wavelength of 670 am radio waves, we need to use the formula:
Wavelength = Speed of light / Frequency
In this case, the frequency is 670 kHz, which is the same as 670,000 Hz. The speed of light is approximately 299,792,458 meters per second.
Therefore, using the formula, we can calculate the wavelength of 670 am radio waves as follows:
Wavelength = 299,792,458 / 670,000
Wavelength = 447.61 meters
So the wavelength of 670 am radio waves is approximately 447.61 meters. This means that the distance between each crest of the radio wave is 447.61 meters.
In summary, the wavelength of 670 am radio waves is approximately 447.61 meters.
This information is useful for understanding how radio waves propagate and how they can be affected by different factors, such as interference or obstacles in the environment.
To know more about wavelength refer here
brainly.com/question/20703644#
#SPJ11
5 grams of ice at 0 celsius are placed in 51 ml of water at 80 celsius. calculate the heat in joules that the water must transfer to the ice just to melt it (write the number without the sign) g
According to the question, the heat required to melt 5.5 gram of ice at 0°C is 1,839 J.
What is heat?Heat is the transfer of energy from one object to another due to a difference in temperature. Heat is the total energy of the motion of particles in an object, including the kinetic energy of the particles and the energy associated with their relative positions. Heat energy is transferred by conduction, convection, and radiation. Conduction is the transfer of heat energy through direct physical contact between particles, while convection is the transfer of heat energy through the movement of a fluid, such as air or water. Radiation is the transfer of heat energy through electromagnetic waves.
The heat required to melt 1 gram of ice at 0°C is 334 J. Therefore, the heat required to melt 5.5 grams of ice at 0°C is 1,839 J.
To learn more about heat
https://brainly.com/question/934320
#SPJ4
In what position should your wheels be when parking on a down hill street with the curb to the right?
When parking on a downhill street with the curb to the right, it is essential to position your wheels in a particular way to avoid any accidents or damage to your vehicle.
The correct position for your wheels is to turn them towards the curb. This means that the front wheels of your car should be turned to the right, towards the curb, and the rear wheels should be straight.
Turning the front wheels towards the curb will create an uphill buffer, which will prevent the car from rolling downhill if the brakes fail. This is especially important if you are parking on a steep slope. Additionally, turning the wheels towards the curb will also ensure that your car is parked closer to the curb, leaving enough space for other vehicles to pass.
It is essential to ensure that your wheels are in the correct position when parking on a downhill street to avoid any potential accidents. Remember to always engage the handbrake and put the car in park or first gear to ensure that it does not move while parked.
To know more about parking click here:
https://brainly.com/question/15200023
#SPJ11
what happens to the incidence of change blindness when a cue is added to the scene that indicates which part of the scene has changed? a. it increases. b. it decreases. c. it remains unchanged. d. it can increase or decrease, depending on the cue duration.
When a cue is added to a scene to indicate which part of the scene has changed, it can affect the incidence of change blindness. In general, the addition of a cue can decrease the incidence of change blindness, as it allows viewers to more easily identify the changes in the scene.
For example, a brief cue, such as a flash of light, can be effective in decreasing the incidence of change blindness. However, if the cue is too long or too complex, it can actually increase the incidence of change blindness, as the viewer may become distracted by the cue itself.
Therefore, the effect of adding a cue on the incidence of change blindness can vary depending on the duration and complexity of the cue.
Know more about Blindness here
https://brainly.com/question/2122175#
#SPJ11
A stone is shot straight upward with a speed of 20 m/sec from a tower 200 m high. The speed with which it strikes the ground is approximately
A stone is shot straight upward with a speed of 20 m/sec from a tower 200 m high. The speed with which it strikes the ground is approximately 176.2 m/s.
To solve this problem, we can use the kinematic equation
[tex]v^{2}[/tex] = [tex]u^{2}[/tex] + 2as
Where v is the final velocity, u is the initial velocity, a is the acceleration due to gravity (approximately 9.81 m/[tex]s^{2}[/tex]), and s is the distance fallen.
At the top of its trajectory, the stone's velocity is 0, so we can use this equation to find the time it takes to reach that point
0 = [tex](20m/s)^{2}[/tex] - 2(9.81 m/[tex]s^{2}[/tex])(200 m)
t = 20 seconds
Using this time, we can find the final velocity of the stone when it hits the ground
v = 20 m/s - (9.81 m/[tex]s^{2}[/tex])(20 s)
v = -176.2 m/s
The negative sign indicates that the stone is moving downward. Therefore, the speed with which it strikes the ground is approximately 176.2 m/s.
To know more about speed here
https://brainly.com/question/13014666
#SPJ4
as you know, a common example of a harmonic oscillator is a mass attached to a spring. in this problem, we will consider a horizontally moving block attached to a spring. note that, since the gravitational potential energy is not changing in this case, it can be excluded from the calculations. for such a system, the potential energy is stored in the spring and is given by
The displacement of the block is 2 meters when the potential energy of the system is 100 J.
The potential energy of a horizontally moving block attached to a spring can be calculated using the formula for spring potential energy:
[tex]U = 0.5 * k * x^2[/tex]
The potential energy of the system, we need to first determine the displacement of the block. The displacement can be found by subtracting the initial position of the block from its final position:
x = final position - initial position
If the initial position of the block is 0 meters and its final position is x meters, we can substitute these values into the formula for potential energy as follows:
[tex]U = 0.5 * k * x^2\\[/tex]
x = [tex]\sqrt{(U / (0.5 * k))}[/tex]
This formula can be used to find the displacement of the block when the potential energy of the system is known. For example, if the potential energy of the system is 100 J, we can use the formula to find the displacement of the block as follows:
For this example, we can assume that the spring constant is 100 N/m. Substituting this value into the formula for potential energy, we can find the displacement of the block as follows:
x = [tex]\sqrt{(100 J / (0.5 * 100 N/m))}[/tex]
x = [tex]\sqrt{(100 J / 50 N/m)}[/tex]
x = 2 meters
Therefore, the displacement of the block is 2 meters when the potential energy of the system is 100 J.
Learn more about displacement Visit: brainly.com/question/28370322
#SPJ4
77) During each cycle, the compressor in a certain ideal Carnot refrigerator performs 480 J of work to remove 150 J of heat from the interior of the refrigerator. How much heat do the coils behind the refrigerator discharge into the kitchen each cycle?
A) 110 J
B) 150 J
C) 330 J
D) 480 J
E) 630 J
The coils behind the refrigerator discharge 330 J of heat into the kitchen each cycle (C).
According to the Carnot cycle, the amount of heat removed from the interior of the refrigerator is equal to the amount of work done by the compressor plus the amount of heat discharged into the kitchen. Therefore, the amount of heat discharged into the kitchen can be calculated as follows:
Heat discharged = work done by the compressor + heat removed from the interior
Heat discharged = 480 J + 150 J
Heat discharged = 630 J
However, not all of the heat removed from the interior of the refrigerator is discharged into the kitchen. Some of it is used to cool the coils behind the refrigerator. Since this is an ideal Carnot refrigerator, the amount of heat discharged is proportional to the temperature difference between the coils and the kitchen. If we assume that the temperature of the coils is the same as the temperature inside the refrigerator, then the ratio of the heat discharged to the total heat removed is equal to the ratio of the temperature difference between the coils and the kitchen to the temperature inside the refrigerator. This gives:
Heat discharged/Total heat removed = (T_inside - T_kitchen)/T_inside
Heat discharged/150 J = (480 J/150 J)
Heat discharged = 330 J
Therefore, the coils behind the refrigerator discharge 330 J of heat into the kitchen each cycle.
To learn more about temperature, click here: https://brainly.com/question/31655489
#SPJ11
Two identical pendulums have the same period when measured in the factory. While one pendulum swings on earth, the other is taken on a spaceship traveling at 95% the speed of light. Assume that both pendulums operate under the influence of the same net force and swing through the same angle.
The pendulum on the spaceship will experience time dilation and appear to have a longer period than the pendulum on Earth. This is due to Einstein's theory of special relativity, which states that time appears to slow down for objects traveling at high speeds relative to an observer.
In this case, the spaceship is traveling at 95% the speed of light, so time on the spaceship will appear to slow down for an observer on Earth.
The period of a pendulum is the time it takes for it to complete one full swing. The period of a pendulum is dependent on its length and the force of gravity. However, in this scenario, both pendulums operate under the same net force and swing through the same angle, so they have the same period when measured in the factory.
When the pendulum on the spaceship is taken away from Earth, it is traveling at a very high speed relative to an observer on Earth. According to Einstein's theory of special relativity, time appears to slow down for objects traveling at high speeds relative to an observer. This means that the pendulum on the spaceship will appear to have a longer period when measured by an observer on Earth.
In conclusion, the pendulum on the spaceship will experience time dilation and appear to have a longer period than the pendulum on Earth, even though they both operate under the same net force and swing through the same angle.
To know more about Einstein's theory refer to
https://brainly.com/question/22816553
#SPJ11
When an electromagnetic wave meets a reflecting surface, the direction taken by the
reflected wave is determined by:
A.the material of the reflecting surface
B.the angle of incidence
C.the index of the medium
D.the intensity of the wave
E.the wavelength
When an electromagnetic wave meets a reflecting surface, the direction taken by the reflected wave is determined by: B. the angle of incidence.
What is electromagnetic?Electromagnetism is a branch of physics that deals with the interaction of electric charge and magnetic fields. It is one of the four fundamental forces of nature, the other three being gravity, the weak nuclear force, and the strong nuclear force. Electromagnetism is responsible for the attraction and repulsion of objects with electrical charge and magnetism, and is also responsible for the behavior of electrons in an atom. Electromagnetic fields are created by electric charges and can interact with other electric fields and magnetic fields. Electromagnetic waves are produced when varying electric and magnetic fields interact with each other. These waves have the potential to travel through space and are used in a variety of applications, from radio and television broadcasting to communications and radar.
To learn more about electromagnetic
https://brainly.com/question/1408043
#SPJ4
imagine that you are at the center of the mwg. what would a scatterplot of theglobular clusters look like from your position
The scatterplot of the globular clusters would appear as a spherical distribution centred at the Milky Way Galaxy's centre.
From the centre of the Milky Way Galaxy, the globular clusters would be distributed evenly around us, creating a spherical shape. The clusters' distance from us would vary, and their positions in the scatterplot would reflect this.
From the centre of the Milky Way Galaxy, we would have a unique perspective on the distribution of globular clusters. Globular clusters are densely packed groups of stars that orbit around the galaxy's centre. These clusters are thought to be some of the oldest structures in the galaxy and can provide insight into the galaxy's early formation.
The scatterplot of the globular clusters would appear as a spherical distribution centred at the Milky Way Galaxy's centre. This shape would result from the clusters' orbital paths around the galaxy's centre, with some clusters closer and others further away. The clusters' distance from us would vary, and their positions in the scatterplot would reflect this.
Observing the globular clusters' scatterplot from the centre of the Milky Way Galaxy would reveal the overall distribution of the clusters and provide insight into the galaxy's structure. Scientists could use this information to better understand the galaxy's history and formation. Additionally, studying the globular clusters could help us learn more about the formation and evolution of stars and galaxies in general.
In conclusion, the scatterplot of the globular clusters observed from the centre of the Milky Way Galaxy would reveal important information about the galaxy's structure and history. This unique perspective could provide insight into the formation and evolution of the Milky Way and help us better understand the universe around us.
To know more about Milky Way Galaxy, visit:
https://brainly.com/question/2905713
#SPJ11
you remove the batteries from a working flashlight, turn both of them around as a pair, and reinsert them in the flashlight. they make good contact with the flashlight's terminals at both ends, so that there is no mechanical problem preventing the flashlight from working. if you now switch on the flashlight, it will group of answer choices not work because only electrons can actually move through a circuit. the positively charged atomic nuclei are immobile. work properly, although current will now be flowing backward through its circuit. not work because the batteries can't send current backward through the flashlight's circuit. not work because the light bulb can only carry electric current in one direction. will work momentarily, but then the bulb will burn out.
If you remove the batteries from a working flashlight, turn both of them around as a pair, and reinsert them in the flashlight, it will not work because the batteries can't send current backward through the flashlight's circuit.
Flashlights are designed to work with a specific polarity, which means the direction in which the electric current flows. By reversing the batteries, you are also reversing the polarity.
Most flashlights have a simple circuit, and reversing the batteries will prevent the circuit from being completed, so the flashlight will not work.
When batteries are inserted in reverse, the flashlight will not work due to the incorrect flow of electric current in the circuit. Make sure to insert the batteries with the correct polarity to ensure proper functioning.
For more information on circuit kindly visit to
https://brainly.com/question/27206933
#SPJ11
You toss a (wrapped) sandwich to a friend leaning out of a window 10 m above you, throwing just hard enough for it to reach her. At the same instant, she drops a silver dollar to you. At what position do the dollar and the sandwich pass each other?
The sandwich and the silver dollar will pass each other at a height of 10m above the ground.
We'll consider the sandwich's trajectory and the silver dollar's fall to determine their passing position.
1. Firstly, let's analyze the sandwich's motion. Since it's thrown just hard enough to reach your friend, it will have an initial vertical velocity (V0) and cover a distance of 10 meters in its ascent. We can use the equation H = V0t - (1/2)gt^2, where H is the height, t is the time taken, and g is the acceleration due to gravity (9.81 m/s^2).
2. For the silver dollar, it's dropped from rest, meaning its initial velocity is 0. We can apply the same equation to its motion: H = (1/2)gt^2.
3. The sandwich and the silver dollar will pass each other at the same time (t) and height (H). Therefore, we can equate the two equations:
V0t - (1/2)gt^2 = (1/2)gt^2.
4. This simplifies to V0t = gt^2, and we can solve for t: t = V0/g.
5. Substitute t back into the equation for the silver dollar's motion: H = (1/2)g(V0/g)^2 = (1/2)(V0^2/g).
6. Since we don't have the numerical value of V0, we cannot find the exact height (H). However, we've established the position where the dollar and sandwich pass each other in terms of V0 and g. Their passing height will be H = (1/2)(V0^2/g) above the ground.
For more about height:
https://brainly.com/question/10726356
#SPJ11