The pH values after the given volumes of acid have been added are: a) 12.18, b) 12.39, c) 11.78, d) 11.25, and e) 10.79.To solve the problem, we need to use the balanced chemical equation for the reaction between KOH and HClO4:
KOH + HClO4 -> KClO4 + H2O
At the start of the titration, before any HClO4 has been added, we have a solution of KOH with a concentration of 0.150 M. We can use this concentration to calculate the initial concentration of hydroxide ions in the solution:
[OH-] = 0.150 M
a) Before any HClO4 has been added, the volume of the solution is 20.0 mL. At this point, no HClO4 has reacted with the KOH, so the concentration of OH- ions is still 0.150 M.
To calculate the pH, we can use the formula for the dissociation constant of water:
Kw = [H+][OH-] = 1.0 x 10^-14
pH = -log[H+]
[H+] = Kw/[OH-] = 6.67 x 10^-13 M
pH = -log(6.67 x 10^-13) = 12.18
b) After 1.5 mL of HClO4 has been added, the volume of the solution is 21.5 mL. The moles of HClO4 added is:
0.125 mol/L x 0.0015 L = 1.875 x 10^-5 mol
The moles of KOH initially in the solution is:
0.150 mol/L x 0.020 L = 0.003 mol
Thus, the moles of KOH remaining after reaction with HClO4 is:
0.003 mol - 1.875 x 10^-5 mol = 0.00298125 mol
The total volume of the solution is 21.5 mL, so the new concentration of KOH is:
0.00298125 mol / 0.0215 L = 0.1387 M
Using this concentration, we can calculate the concentration of OH- ions:[OH-] = 0.1387 M
Using the same formula for Kw and pH as before, we find that:
[H+] = 4.06 x 10^-13 M
pH = -log(4.06 x 10^-13) = 12.39
c) Repeating the above process for a volume of 24.0 mL gives:
[H+] = 1.64 x 10^-12 M
pH = -log(1.64 x 10^-12) = 11.78
d) For a volume of 26.5 mL:
[H+] = 5.67 x 10^-12 M
pH = -log(5.67 x 10^-12) = 11.25
e) For a volume of 29.0 mL:
[H+] = 1.63 x 10^-11 M
pH = -log(1.63 x 10^-11) = 10.79
To learn more about dissociation constant Click here:
brainly.com/question/28197409
#SPJ4
which experimental procedure(s) must scientists use to determine vmax and km of an enzymatic reaction using the michaelis-menten model? they must ensure that:
To determine the Vmax and Km of an enzymatic reaction using the Michaelis-Menten model, scientists must maintain constant enzyme and reaction times.
monitor the product concentration at different substrate concentrations, and use controls to ensure that observed changes are due to enzymatic activity
1. They only take into account the rate of the first reaction for each substrate concentration.
2. The first substrate concentrations tested are all significantly higher than the initial enzyme concentrations.
— The concentration of substrate at which 12Vmax occurs is Km.
Three underlying premises underlie the Michaelis-Menten equation:
The substrate concentration [S] during the reaction is constant according to the free ligand assumption.
2. The steady-state hypothesis postulates that the amount of ES remains constant during the reaction, allowing the rate of product creation to stay constant.
3. According to the irreversibility assumption, the reaction only moves in one direction and the product cannot be changed back into the substrate.
Learn more about enzyme here:
https://brainly.com/question/1865289
#SPJ4
chronic pesticide exposure has been clearly linked to
Chronic pesticide exposure has been linked to a variety of negative health outcomes, both acute and chronic.
Pesticides are commonly used in agriculture, public health, and residential settings to control insects, rodents, and other pests. However, these chemicals are often toxic and can pose risks to human health, particularly when used inappropriately or without proper safety precautions. One of the most common health effects of chronic pesticide exposure is neurological damage. Pesticides can penetrate the blood-brain barrier and cause damage to the central and peripheral nervous systems. This can lead to a variety of symptoms, including headaches, dizziness, memory loss, tremors, and seizures. In addition to neurological effects, chronic pesticide exposure has also been linked to cancer. Several studies have found that exposure to certain pesticides can increase the risk of developing various types of cancer, including lymphoma, leukemia, and breast cancer. Pesticides have also been shown to disrupt the endocrine system, which can lead to a variety of negative health effects, including reproductive problems, developmental delays, and thyroid dysfunction. Children and pregnant women are particularly vulnerable to these effects. Other negative health effects associated with chronic pesticide exposure include respiratory problems, skin irritation, and gastrointestinal problems. These health effects can range from mild to severe, and can have long-term consequences for affected individuals. Given the potential risks associated with chronic pesticide exposure, it is important to take steps to minimize exposure to these chemicals. This may include using alternative pest control methods, wearing protective clothing and equipment when handling pesticides, and following safe handling procedures. Additionally, it is important to be aware of the potential health risks associated with chronic pesticide exposure, and to seek medical attention if symptoms arise.
To know more about Chronic pesticide click here:
brainly.com/question/24316938
#SPJ4
the thermometer you use to measure the freezing temperature of the solvent actually records a temperature that is 0.12c too high. unfortunately you break this thermometer and borrow a fellow students thermometer, which reads 0.11c too low. if the molality of your solution is 0.30, calculate the contribution to the percentage error in your result due to not correcting for the errors in the thermometer readings.
The contribution to the percentage error in the freezing point depression due to the errors in the thermometer readings is 1.76%.
The freezing point depression is a colligative property that depends only on the molality of the solute particles in a solution and is independent of the identity of the solute. Therefore, the freezing point depression is given by the equation:
ΔTf = Kf x molality
where ΔTf is the change in the freezing point, Kf is the freezing point depression constant for the solvent, and molality is the concentration of solute particles in moles per kilogram of solvent.
However, in this case, there are errors in the thermometer readings that can contribute to the uncertainty in the calculated freezing point depression. The errors are +0.12°C for the initial thermometer and -0.11°C for the borrowed thermometer.
The total error due to thermometer readings is the sum of the errors from both thermometers, which is:
Total error = +0.12°C - 0.11°C = +0.01°C
The percentage error due to the thermometer readings can be calculated as:
Percentage error = (total error / measured freezing point) x 100%
The measured freezing point is the sum of the actual freezing point depression and the error due to the thermometer readings. Assuming that the actual freezing point depression was accurately measured, the measured freezing point can be expressed as:
Measured freezing point = actual freezing point depression + total error
Since the molality of the solution is given as 0.30, the actual freezing point depression can be calculated using the freezing point depression constant for the solvent.
Assuming a typical freezing point depression constant for the water of 1.86°C/m, the actual freezing point depression would be:
actual freezing point depression = Kf x molality = 1.86°C/m x 0.30 mol/kg = 0.558°C
Therefore, the measured freezing point would be:
Measured freezing point = actual freezing point depression + total error = 0.558°C + 0.01°C = 0.568°C
The percentage error due to the thermometer readings would be:
Percentage error = (total error / measured freezing point) x 100% = (0.01°C / 0.568°C) x 100% = 1.76%
To learn more about freezing point depression
https://brainly.com/question/12844810
#SPJ4
in the lab you measured the initial mass of hydrated to be 9.5 grams. after heating the substance to a constant mass, you measure the final mass of the anhydrate to be 3.77 g. determine the percent by mass of water in the hydrated.
The percent by mass of water in the hydrated compound is 60.3%.
What is percentage by mass?Percentage by mass is a way to express the concentration of a solution or the composition of a mixture as a percentage of the total mass of the solution or mixture. It is calculated by dividing the mass of the solute or component of interest by the total mass of the solution or mixture and multiplying by 100%.
The formula for percentage by mass is:
Percentage by mass = (Mass of solute or component / Total mass of solution or mixture) x 100%
The mass of water in the hydrated compound can be calculated by subtracting the final mass of the anhydrate from the initial mass of the hydrated:
Mass of water = Initial mass of hydrated - Final mass of anhydrate Mass of water = 9.5 g - 3.77 g Mass of water = 5.73 g
The percent by mass of water in the hydrated compound can be calculated using the following formula:
Percent by mass = (Mass of water / Initial mass of hydrated) x 100%
Substituting the values we get:
Percent by mass = (5.73 g / 9.5 g) x 100% Percent by mass = 60.3%
Therefore, the percent by mass of water in the hydrated compound is 60.3%.
To know more about solution, visit:
https://brainly.com/question/7932885
#SPJ1
why is it more accurate to standardize the naoh with khp than to standardize with a solution of hcl?
It is more accurate to standardize the NaOH with KHP than to standardize with a solution of HCl because it is stable under the acid base reaction conditions and has a high molecular weight.
Titration processes may occasionally claim a standardization process to regularize a secondary standard using a primary standard. This is because a secondary standard is what will be used in the titration of a certain analyte and its original attention may not be known directly beforehand.
Strong base solutions need to be standardised since chemicals like NaOH will inadvertently pick up moisture from the air and react with gases like CO2 to produce undesired contaminants in the base's stock sample. As a result, we cannot be certain that the mass of NaOH pellets we measure to create a desired solution is the mass of NaOH itself. The bulk consists of all of the impurities together. As a result, we cannot be certain of the base concentration in the solution we make.
Learn more about Solution of KHP:
https://brainly.com/question/15411716
#SPJ4
The most abundant minerals on Earth belong to the chemical group termed the a) Silicates b) Carbonates c) Halides d) Oxides
The Silicates are a class of chemicals that includes the most prevalent minerals on Earth.
What is the mineral group that is most prevalent on Earth?Over 90% of the crust of the Earth is made up of the roughly 1,000 silicate minerals. The largest mineral group by far is the silicate family. The two silicate minerals that are most prevalent are feldspar and quartz. Both minerals are very widespread rock-forming minerals.
Why are silicates the minerals that are most common on Earth?Silicate minerals are exceptionally stable and prevalent in crustal rocks and sediments because oxygen and silicon are the two most plentiful elements in the Earth's crust and because the (SiO4) tetrahedron is such a stable complex. They predominate in numerous sedimentary rocks as well as igneous and metamorphic rocks.
To know more about Silicates visit:-
https://brainly.com/question/29560091
#SPJ1
PLEASE ANSWERRRR I need to know the correct answer and how to get it step by step
The wavelength of the single photon of UV-A electromagnetic radiation is 3.2×10⁻⁵ cm (2nd option)
How do I determine the wavelength of the single photon of UV-A?We'll begin by obtaining the frequency of the single photon of UV-A. Details below:
Energy (E) = 6.2×10⁻¹⁹ JPlanck's constant (h) = 6.626×10⁻³⁴ JsFrequency (f) =?Energy (E) = Planck's constant (h) × frequency (f)
E = hf
6.2×10⁻¹⁹ = 6.626×10⁻³⁴ × f
Divide both sides by 6.626×10⁻³⁴
f = 6.2×10⁻¹⁹ / 6.626×10⁻³⁴
f = 9.36×10¹⁴ Hz
Finally, we shall determine the wavelength of the single photon of UV-A. Details below:
Frequency (f) = 9.36×10¹⁴ Hz Speed of wave (v) = 3×10⁸ m/sWavelength (λ) = ?Velocity (v) = wavelength (λ) × frequency (f)
3×10⁸ = wavelength × 9.36×10¹⁴
Divide both sides by 9.36×10¹⁴
λ = 3×10⁸ / 9.36×10¹⁴
λ = 3.2×10⁻⁷ m
Multiply by 100 to express in meter (m)
λ = 3.2×10⁻⁷ × 100
λ = 3.2×10⁻⁵ cm
Thus, the wavelength is 3.2×10⁻⁵ cm (2nd option)
Learn more about wavelength:
https://brainly.com/question/13659036
#SPJ1
a swimming pool whose volume is gal contains water that is ​% chlorine. starting at t​0, city water containing ​% chlorine is pumped into the pool at a rate of ​gal/min. the pool water flows out at the same rate. what is the percentage of chlorine in the pool after ​? when will the pool water be ​% ​chlorine?
the percentage of chlorine in the pool will be % When the amount of chlorine in the pool is equal to the amount that was in the city water.
The pool has a total volume of gal, and it is initially filled with water containing % chlorine. Starting at t0, city water containing % chlorine is pumped into the pool at a rate of gal/min. At the same time, the pool water flows out of the pool at the same rate.
After minutes, the pool will contain % chlorine. This can be determined by calculating the amount of chlorine that will be in the pool after minutes, which is calculated by adding the amount of chlorine that was initially in the pool and the amount of chlorine that will be added to the pool from the city water. When the amount of chlorine in the pool is equal to the amount that was in the city water, the percentage of chlorine in the pool will be %.
When the pool water reaches % chlorine, this will happen after minutes. This can be determined by calculating the amount of chlorine that will be in the pool after minutes, which is calculated by subtracting the amount of chlorine that was initially in the pool, and adding the amount of chlorine that will be added to the pool from the city water. When the amount of chlorine in the pool is equal to the amount that was in the city water, the percentage of chlorine in the pool will be %.
To know more about percentage of chlorine click here:
brainly.com/question/14988832
#SPJ4
Which of the following is true for all exergonic reactions?
A) The products have more total energy than the reactants.
B) The reactions proceed with a net release of free energy.
C) The reactions are always rapid.
D) The reactions only occur in certain organelles called exergonomes.
B) The reactions proceed with a net release of free energy.
Exergonic reactions are those that release energy.
In these reactions, the products have less potential energy than the reactants, and the difference between the two is given off as free energy that can be harnessed to do work. This means that the products have lower free energy than the reactants.
For a reaction to be exergonic, the change in Gibbs free energy (ΔG) must be negative, which indicates that the reaction is spontaneous and will proceed without the input of additional energy. This is in contrast to endergonic reactions, which require an input of energy to proceed.
The rate of exergonic reactions can vary widely, and they may occur at different rates depending on the specific conditions of the reaction, such as temperature, concentration, and catalysts.
Exergonic reactions are important in many biological processes, including the breakdown of glucose in cellular respiration, the hydrolysis of ATP to provide energy for cellular processes, and the digestion of food.
Learn more about exergonic reactions here:
https://brainly.com/question/270229
#SPJ4
gram staining property of a bacterium is dependent on
Gram staining property of a bacterium is dependent on the structure of its cell wall, which either retains or loses the crystal violet dye during the staining process.
Gram staining is a laboratory technique used to differentiate bacterial species into two groups based on the structure of their cell walls: Gram-positive and Gram-negative. During the staining process, the bacterial cells are initially stained with crystal violet, then treated with iodine, and washed with alcohol. Gram-positive bacteria have a thick layer of peptidoglycan in their cell walls, which allows them to retain the crystal violet stain and appear purple under a microscope. In contrast, Gram-negative bacteria have a thin layer of peptidoglycan and an outer membrane that contains lipopolysaccharides, which causes them to lose the crystal violet stain and appear red or pink under a microscope. The Gram staining property of a bacterium is important for identifying and classifying bacterial species, as well as for selecting appropriate antibiotic treatments.
Peptidoglycan is a polymer consisting of sugars and amino acids that forms a mesh-like structure in the cell wall of bacteria, providing rigidity and protection against osmotic pressure. Lipopolysaccharides are complex molecules that are part of the outer membrane of Gram-negative bacteria, contributing to their structural integrity and resistance to antibiotics.
Learn more about peptidoglycan and lipopolysaccharides here:
https://brainly.com/question/13021055
#SPJ4
electron orbital transition a produces light with a wavelength of 690 nm. transition b involves half the energy of transition a. what wavelength (in nm) is the light it produces?
As electron orbital transition a produces light with a wavelength of 690 nm, the wavelength of the light produced by transition b is 1380 nm.
Calculating the Wavelength of Light Produced by Electron Orbital TransitionsThe energy of a photon is inversely proportional to its wavelength, so we can use the fact that transition b involves half the energy of transition a to determine the wavelength of the light it produces.
The energy of transition b is half that of transition a, so the wavelength of the light produced by transition b will be twice that of transition a. Therefore, the wavelength of the light produced by transition b is:
Wavelength b = 2 x Wavelength a
Wavelength b = 2 x 690 nm
Wavelength b = 1380 nm
So, the wavelength of the light produced by transition b is 1380 nm.
To know more about wavelengths, visit:https://brainly.com/question/13533093
#SPJ4
.What is the gram-formula mass of a compound if 5 moles of the compound have a mass
of 100 grams?
The gram formula mass of a compound if 5 moles of the compound have a mass of 100 grams would be 20 grams/mole.
What is gram-formula mass?The gram formula mass of a compound is the total weight of all atoms in a molecule or a formula unit of a substance.
It is also the ratio of the mass of a compound and the number of moles present in the mass of the compound.
Gram formula mass = mass/mole
In this case, mass = 100 grams, and mole = 5 moles
Gram formula mass = 100/5
= 20 grams/mole
In other words, the gram formula mass of the compound is 20 grams/mole.
More on gram formula mass can be found here: https://brainly.com/question/15232447
#SPJ1
lysine is an essential amino acid. one experiment showed that each molecule of lysine contains two nitrogen atoms. another experiment showed that lysine contains 19.2% n, 9.64% h, 49.3% c, and 21.9% o by mass. what is the molecular formula for lysine?
The molecular formula for lysine is [tex]C6H14N2O2[/tex] which in one experiment showed that each molecule of lysine contains two nitrogen atoms while the other contains 19.2% N, 9.64% H, 49.3% C, and 21.9% O by mass.
The molecular formula for lysine is calculated using the percentages of each element.
Given for nitrogen, the mass percentage = 19.2%
The atomic mass of nitrogen (N) known = (14.01 g/mol)
The number of atoms of nitrogen = 19.2/14.01 = 1.38 ≈ 2
For hydrogen, the mass percentage = (9.64%)
the atomic mass of hydrogen (H) known = (1.01 g/mol)
The number of atoms of hydrogen = 9.64/1.01 = 9.54 ≈ 10
For carbon, the mass percentage = (49.3%)
the atomic mass of carbon (C) known = (12.01 g/mol)
The number of atoms of carbon = 49.3/12.01 = 4.11 ≈ 6
For oxygen, the mass percentage = (21.9%)
the atomic mass of oxygen (O) known = (16.00 g/mol)
The number of atoms of oxygen =21.9/16 = 1.36 ≈ 2
Therefore, the molecular formula of lysine is [tex]C6H14N2O2[/tex].
To learn more about lysine click here https://brainly.com/question/21090800
#SPJ4
the dependence of the rate constant on temperature is expressed by which equation?
The Arrhenius equation. The de Broglie equation. The van't Hoff equation. Temperature has no effect on the rate constant.
The dependence of the rate constant on temperature is expressed by equation i.e. The Arrhenius equation. Hence, the correct option is (a).
The dependence of the rate constant on temperature is expressed by the Arrhenius equation. The Arrhenius equation is a simple mathematical relationship that describes the temperature dependence of the rate constant, k, of a chemical reaction. The equation is given by:
[tex]k = Ae^(-Ea/RT)[/tex]
here,
A is pre-exponential factor,
Ea is activation energy,
R is gas constant,
T is temperature (Kelvin)
The Arrhenius equation states that the rate constant of a reaction increases exponentially with temperature. This means that as the temperature increases, the rate constant also increases, resulting in an increase in the reaction rate. The de Broglie equation describes the relationship between the wavelength and momentum of a particle and is not related to the rate constant of a chemical reaction. The van't Hoff equation is related to the Arrhenius equation and is used to describe the relationship between the reaction rate and temperature for a reaction in solution.
Hence, the Arrhenius equation is the equation that expresses the dependence of the rate constant on temperature.
To know more about rate constant please refer: https://brainly.com/question/14977272
#SPJ4
Question - The dependence of the rate constant on temperature is expressed by which equation? Choose the correct answer.
(a) The Arrhenius equation.
(b) The de Broglie equation.
(c) The van't Hoff equation.
(d) Temperature has no effect on the rate constant.
a stopper was found to have a mass of 5.06 g. when placed in a graduated cylinder containing 45.2 ml of water, the volume of the stopper and water was found to be 49.4 ml. calculate the density of the stopper. enter your final answer with two (2) significant figures.
The density of an object is its mass divided by volume. The mass of a the stopper is given 5.06 g with a volume of 4.2 ml . Then the density of the stopper is 1.2 g/ml.
What is density ?Density of substance is the measure of its mass per unit volume. It describes how closely its particles are packed. Density depends on the bond type, temperature and pressure.
Volume of the object is the space occupied by its particles. Volume can be expressed in L, ml, cm³, dm³ etc. Only solids and liquids has a definite volume and the volume of gases is that of the container.
Give that, volume of water = 45.2 ml
Total volume = 49.4 ml.
then volume of stopper = 49.4 - 45.2 = 4.2 ml.
Mass of stopper = 5.06 kg
density = mass/volume
= 5.06 g / 4.2 ml
= 1.2 g/ml
Therefore, the density of the stopper is 1.2 g/ml.
Find more on density:
brainly.com/question/15164682
#SPJ1
in lab you're required to make 250.0 ml of a 1.7 m naoh solution. how many grams of naoh should you measure out to make the solution
you need to measure out 17.0 grams of NaOH to prepare a 1.7 M solution of 250.0 mL.
To calculate the amount of NaOH needed to prepare a 1.7 M solution of 250.0 mL, we can use the formula:
moles of solute = concentration (in M) x volume (in L)
First, we need to convert the volume from milliliters to liters:
250.0 mL = 250.0 / 1000 = 0.25 L
Now, we can plug in the values:
moles of NaOH = 1.7 M x 0.25 L
moles of NaOH = 0.425 mol
Finally, we can calculate the mass of NaOH required using its molar mass:
mass of NaOH = moles of NaOH x molar mass of NaOH
The molar mass of NaOH is 40.00 g/mol (sodium: 22.99 g/mol, oxygen: 15.99 g/mol, hydrogen: 1.01 g/mol).
mass of NaOH = 0.425 mol x 40.00 g/mol
mass of NaOH = 17.0 g
Therefore, To calculate the amount of NaOH needed to prepare a 1.7 M solution of 250.0 mL, we can use the formula:
moles of solute = concentration (in M) x volume (in L)
First, we need to convert the volume from milliliters to liters:
250.0 mL = 250.0 / 1000 = 0.25 L
Now, we can plug in the values:
moles of NaOH = 1.7 M x 0.25 L
moles of NaOH = 0.425 mol
Finally, we can calculate the mass of NaOH required using its molar mass:
mass of NaOH = moles of NaOH x molar mass of NaOH
The molar mass of NaOH is 40.00 g/mol (sodium: 22.99 g/mol, oxygen: 15.99 g/mol, hydrogen: 1.01 g/mol).
mass of NaOH = 0.425 mol x 40.00 g/mol
mass of NaOH = 17.0 g
Therefore, you need to measure out 17.0 grams of NaOH to prepare a 1.7 M solution of 250.0 mL.
Find out more about naoh solution.
brainly.com/question/28177652
#SPJ4
What is meant by redox reaction?
Answer:
A redox reaction, also known as oxidation-reduction reaction, is a type of chemical reaction in which the oxidation state of a molecule changes due to the transfer of electrons from one molecule to another molecule.
Answer:
A chemical reaction that takes place between an oxidizing substance and a reducing substance.
Explanation:
Which substances leave the blood by diffusing directly through the plasma membrane of endothelial cells?
-Carbon dioxide
-Steroid hormones
-Oxygen
Oxygen and carbon dioxide are two substances that can diffuse directly from the blood through the plasma membrane of endothelial cells.
After exiting circulation, red blood cells transport oxygen, which is required for aerobic respiration, and this oxygen diffuses into the body's cells.
Carbon dioxide is produced as a byproduct of cellular respiration and diffuses into the bloodstream from the cells. In contrast to carbon dioxide and oxygen steroid hormones are too large to diffuse through the membrane instead they must be transferred into or out of the cell by a specific carrier molecule known as a transporter protein.
As a result, steroid hormones do not rapidly diffuse past the plasma membrane of endothelial cells and depart the body.
Learn more about diffusion in blood:
https://brainly.com/question/14119214
#SPJ4
a doctor orders 120. ml of 4 % (m/v) ibuprofen. if you have 10. % (m/v) ibuprofen on hand, how many milliliters do you need? express the volume to two significant figures and include the appropriate units.
When we have 10% (m/v) ibuprofen on hand, we have to add 48ml of 10% (m/v) solution.
Lets say, we need 'x' ml of ibuprofen
the molecular weight of ibuprofen = 206.29 g/mol
now we know 4%(m/v) ibuprofen means 100ml of the total solution contains 4g of ibuprofen = 4g/206.29g/mol
= [tex]\frac{4}{206.29}[/tex]mol of ibuprofen
100 ml contains = [tex]\frac{4}{206.29}[/tex]mol
therefore 120 ml contains = = [tex]\frac{4}{206.29}[/tex] x 120 mol........(1)
10% (m/v) means 100ml contains mol
therefore we know 'x' ml is
10/206.29 × x mol........(ii)
we can say that (i) = (ii)
so we get,
120×4 = 10x
10x = 480
x = 48
so now we have to add 48ml of 10% (m/v) solution.
S₁×v₁ = S₂v₂
∴4 × 120 = 8 × v₂
v₂ = 48
To learn more about volume, click here:
brainly.com/question/29064747
#SPJ4
in water, 1 mol of al(clo3)3 (aq) will dissociate into which ions?
In water, 1 mol of Al(ClO₃)₃ (aq) will dissociate into two moles of Al³⁺ ions and three moles of ClO³⁻ions.
In water, 1 mol of Al(ClO₃)₃ (aq) will dissociate into the following ions: Al³⁺and ClO³⁻.
When Al(ClO₃)₃ is dissolved in water, it will dissociate into its constituent ions. The Al³⁺ ion will separate from the three ClO³⁻ ions. This process is known as dissociation and is a common occurrence when ionic compounds are dissolved in water.
The resulting solution will contain Al³⁺ and ClO³⁻ions that are free to move around and interact with other ions in the solution. In summary, 1 mol of Al(ClO₃)₃ (aq) will dissociate into 1 mol of Al³⁺ ions and 3 mol of ClO³⁻ ions in water.
Learn more about dissociate at https://brainly.com/question/9187417
#SPJ11
What is the mass in grams of a 2. 65 mol sample of sodium phosphide, Na3P
264.841g Na3P
1) Find total mass of 1 mol Na3P:
3 × 22.99 (molar mass of Na) = 68.97g
1 × 30.97 (molar mass of P) = 30.97g
68.97g + 30.97g = 99.94g
2) Find mass in grams of 2.65 mol Na3P:
2.65 mol Na3P × (99.94g/1 mol) = 264.841g Na3P
The rays that damage the skin are call?
Answer:
ultraviolet, or UV rays from the sun can damage yor skin. thats why you put on sunscreen lol
Select the gas with the highest average kinetic energy per mole at 298 K. (Please EXPLAIN )? a) O2b) CO2c) H2Od) H2Oe) All have the same kinetic energry.
The gas which have highest average kinetic energy per mole at 298K is b)CO₂.So,correct option is b.
The kinetic energy of gases is a straightforward, generally critical traditional model of the thermodynamic way of behaving of gases, with which numerous foremost ideas of thermodynamics were laid out. The model depicts a gas as an enormous number of indistinguishable submicroscopic particles (iotas or atoms), which are all in consistent, fast, irregular movement. Their size is thought to be a lot more modest than the typical distance between the particles. The particles go through irregular flexible impacts among themselves and with the encasing walls of the compartment. The fundamental rendition of the model depicts the best gas, and thinks about no different communications between the particles.
The kinetic energy of gases makes sense of the perceptible properties of gases, like volume, pressure, and temperature, as well as transport properties like consistency, warm conductivity and mass diffusivity. Because of the time reversibility of minute elements (minuscule reversibility), the motor hypothesis is likewise associated with the guideline of nitty gritty equilibrium, concerning the variance dissemination hypothesis (for Brownian movement) and the Onsager proportional relations.
We know that average kinetic energy is given by the formula =(1/2) mv²
Since temperature is same for all gases, so speed will remain same.
Now,molecular mass will be deciding factor.So,gas which have high molecular mass will have more average kinetic energy.
Molecular mass of O₂=32g
Molecular mass of CO₂=44g
Molecular mass of H₂O(g)=18g
Molecular mass of H₂O(l)=18g
Hence,option b is correct.
To know more about kinetic energy,visit here:
https://brainly.com/question/26472013
#SPJ4
pasteurization was first developed to kill __________ in wine.
Pasteurization was first developed to kill spoilage bacteria in wine.
What is Pasteurization?Pasteurization is a procedure in which a liquid is subjected to a high temperature for a certain time and then cooled rapidly in order to destroy the microorganisms present in it without altering the qualities of the liquid.
Pasteurization was first developed by Louis Pasteur to kill spoilage bacteria in wine. Before the pasteurization process was developed, wine contained bacteria that caused fermentation leading to unpleasant flavors and toxins dangerous to humans.
Learn more about Pasteurization here https://brainly.com/question/3119262
#SPJ11
Which change occurs with the largest increase in entropy at 25oC25oC?A. Br2(l)→Br2(g)Br2(l)→Br2(g)B. C(graphite)→C(diamond)C(graphite)→C(diamond)C. H2O(s)→H2O(l)H2O(s)→H2O(l)D. HCl(g)+H2O(l)→H3O+(aq)+Cl−(aq)HCl(g)+H2O(l)→H3O+(aq)+Cl−(aq)
The largest change in entropy will be in c) C(graphite) -----> C(diamond).So,correct option is c.
Entropy is a logical idea, as well as a quantifiable actual property, that is generally usually connected with a condition of turmoil, haphazardness, or vulnerability. The term and the idea are utilized in assorted fields, from traditional thermodynamics, where it was first perceived, to the minuscule depiction of nature in measurable material science, and to the standards of data hypothesis. It has found far-going applications in science and physical science, in natural frameworks and their connection to life, in cosmology, financial aspects, social science, climate science, environmental change, and data frameworks remembering the transmission of data for telecommunication.
The thermodynamic idea was alluded to by Scottish researcher and designer William Rankine in 1850 with the names thermodynamic capability and intensity potential. In 1865, German physicist Rudolf Clausius, one of the main pioneers behind the field of thermodynamics, characterized it as the remainder of a little measure of intensity to the prompt temperature.
Hence,correct option is c.
To know more about entropy,visit here:
https://brainly.com/question/30691597
#SPJ4
(Complete question) is:
Which change occurs with the largest increase in entropy at 25°C?
a)Br₂(l)----->Br₂(g)
b)Br₂(g)-------->Br(l)
c)C(graphite)-------->C(diamond)
d)H₂O(s)-------->H₂O(l)
please help tysm! this is a study island :)
Answer:
nevermind it was B got it right :)
Explanation:
have a good
suppose that aqueous solutions of barium nitrate and potassium carbonate are mixed. what is the name of the compound or compounds that precipitate? enter the name of the precipitate.
When aqueous solutions of barium nitrate and potassium carbonate are mixed, a precipitate of barium carbonate (BaCO3) will form.
A precipitate is a solid that forms and separates out of a solution when two or more soluble compounds are mixed together.
The balanced chemical equation for the reaction is:
Ba(NO3)2 (aq) + K2CO3 (aq) → BaCO3 (s) + 2 KNO3 (aq)
In this reaction, the barium cation (Ba2+) from barium nitrate (Ba(NO3)2) combines with the carbonate anion (CO32-) from potassium carbonate (K2CO3) to form the insoluble salt barium carbonate (BaCO3), which precipitates out of solution.
Note that the potassium cation (K+) and the nitrate anion (NO3-) remain in solution as soluble salts, potassium nitrate (KNO3).
To learn more about Precipitate :
https://brainly.com/question/20925010
#SPJ4
unless otherwise instructed, you may use the periodic table in the chemistry: problems and solutions book for this question. if you want to make 0.5 l of a 0.01 m solution of bromine (br2) in water, how much bromine would you need? responses 0.8 moles 0.8 moles 0.8 grams 0.8 grams 1.6 moles 1.6 moles 1.6 grams
If you want to make 0.5 liters (0.5 L) of a 0.01 molar (0.01 M) solution of bromine (Br2) in water, you would need 0.8 moles of bromine.
The number of moles of a substance in a solution can be calculated using the following formula:
mole number = concentration (in M) * volume (in L)
For this solution, we have:
number of moles = 0.01 M * 0.5 L = 0.005 moles.Since bromine is a diatomic molecule, its formula weight is the sum of the atomic weights of its two atoms, which is 2(79.904 g/mol) = 159.808 g/mol.
Therefore, the mass of 0.8 moles of bromine would be:
0.8 moles * 159.808 g/mol = 127.046 g
So, the answer is 1.6 moles or 127.046 grams.
To learn more about moles of a substance here:
https://brainly.com/question/20928252
#SPJ4
22.3.2 Test (CST): The Solar System
Question 7 of 10
In which coastal area is the tide rising to form a high tide?
A. One that is rotating toward the Sun
B. One that is rotating toward the Moon
C. One that is rotating away from the Moon
D. One that is rotating away from the Sun
In an ecosystem, the coastal area that is rotating toward the moon is the area where tide rising to form a high tide.
What is an ecosystem?
Ecosystem is defined as a system which consists of all living organisms and the physical components with which the living beings interact. The abiotic and biotic components are linked to each other through nutrient cycles and flow of energy.
Energy enters the system through the process of photosynthesis .Animals play an important role in transfer of energy as they feed on each other.As a result of this transfer of matter and energy takes place through the system .
Learn more about ecosystem,here:
https://brainly.com/question/1673533
#SPJ1
For the first-order reaction 2N2O5 -> 2N2O4 + O2 at a particular temperature. The half-life of N2O5 is 0. 90 hours. What fraction of the initial concentration of N2O5 will remain after 2. 4 hours?
After 2.4 hours, only 15.8% of the initial concentration of N2O5 will remain when first-order reaction 2N2O5 -> 2N2O4 + O2 at a particular temperature. The half-life of N2O5 is 0. 90 hours.
The first-order reaction 2N2O5 -> 2N2O4 + O2 has a rate constant k that can be determined using the half-life of N2O5. The half-life of a first-order reaction is given by the equation:
t1/2 = ln(2) / k
where t1/2 is the half-life and ln is the natural logarithm.
Substituting the given half-life of 0.90 hours into this equation, we can solve for the rate constant k:
0.90 = ln(2) / k
k = ln(2) / 0.90
k = 0.77 / hour
Now we can use the integrated rate law for a first-order reaction to determine the fraction of the initial concentration of N2O5 that will remain after 2.4 hours:
ln([N2O5]t/[N2O5]0) = -kt
where [N2O5]t is the concentration of N2O5 at time t, [N2O5]0 is the initial concentration of N2O5, and k is the rate constant.
We want to find [N2O5]t/[N2O5]0 when t = 2.4 hours. We know that t1/2 = 0.90 hours, so after one half-life (0.90 hours), the concentration of N2O5 will be reduced to half its initial value. After two half-lives (1.80 hours), the concentration will be reduced to one quarter of its initial value, and so on. We can use this information to determine that 2.4 hours is equal to 2.67 half-lives:
2.4 hours / 0.90 hours per half-life = 2.67 half-lives
Substituting this value into the integrated rate law, we get:
ln([N2O5]t/[N2O5]0) = -kt
ln([N2O5]t/[N2O5]0) = -(0.77 / hour) x (2.4 hours)
ln([N2O5]t/[N2O5]0) = -1.85
Taking the antilogarithm of both sides, we get:
[N2O5]t/[N2O5]0 = e^-1.85
[N2O5]t/[N2O5]0 = 0.158
Therefore, after 2.4 hours, only 15.8% of the initial concentration of N2O5 will remain.
To know more about concentration:-
brainly.com/question/10725862
#SPJ4
