Answer:
specific heat capacity of the unknown is 629.66 J/kg C
Explanation:
As we know that gold is heated to 72.3 degree C and mixed with water at 24.8 degree C
Now the final temperature of the mixture is 26 degree C
here we can say that heat given by the gold = heat absorbed by the water
So we will have
Q_{in} = Q_{out}Q
in
=Q
out
2.62 s (72.3 - 24.8) = 15.6 (4186) (26 - 24.8)2.62s(72.3−24.8)=15.6(4186)(26−24.8)
so we will have
s = 629.66 J/kg Cs=629.66J/kgC
so specific heat capacity of the unknown is 629.66 J/kg C
What do all atoms in a period (horizontal rows) have in common?
Answer:
the same number of atomic orbitals.
Explanation:
Answer:
All of the elements in a period have the same number of atomic orbitals. For example, every element in the top row (the first period) has one orbital for its electrons. All of the elements in the second row (the second period) have two orbitals for their electrons.
hope this helps
if it does please mark brianliest
The table below gives the atomic mass and relative abundance values for the three isotopes of element M.
Relative abundance (%) Atomic mass (amu)
78.99 23.9850
10.00 24.9858
11.01 25.9826
What is the average atomic mass (in amu) of element M?
2.86
5.36
24.30
24.98
Answer:
24.30
Explanation:
Multiply the relative abundance by the atomic mass of each isotope, add the results together, and divide by 100. Then round to the correct amount of significant figures.
(78.99 x 23.9850) + (10.00 x 24.9858) + (11.01 x 25.9826)/100
24.30 is the average atomic mass (in amu) of element M.
What is an atomic mass?Atomic mass is the quantity of matter contained in an atom of an element.
Multiply the relative abundance by the atomic mass of each isotope, add the results together, and divide by 100. Then round to the correct amount of significant figures.
(78.99 x 23.9850) + (10.00 x 24.9858) + (11.01 x 25.9826)
2430.501576 ÷ 100
24.30
Hence, 24.30 is the average atomic mass (in amu) of element M.
Learn more about atomic mass here;
https://brainly.com/question/14250653
#SPJ2
What is oxidation state?
Answer:
a number assigned to an element in chemical combination which represents the number of electrons lost (or gained, if the number is negative), by an atom of that element in the compound
Explanation:
sodium, magnesium, iron is zero.
The definition of oxidation state is as follows: Oxidation state is a number given to the atom of an element when participating in a chemical reaction.
OXIDATION STATE:The atoms of elements are not always neutral i.e. carry no charge. They sometimes carry either positive or negative charges to become ions. Ions can either be cations (positively charged) or anions (negatively charged). The amount of charges are represented by numbers placed as a superscript in front of the element involved. These superscript charge assigned to a corresponding element during a chemical reaction is called oxidation state. The oxidation state of an element portrays the number of electrons gained or lost during the reaction.Therefore, oxidation state can be defined as a number given to the atom of an element when participating in a chemical reaction.
Learn more about oxidation state at: https://brainly.com/question/11313964
diagram 1 above shows equimolar samples of two gases inside a container fitted with a removable barrier placed so that each gas occupies the same volume. the barrier is carefully removed as the temperature is held constant. diagram 2 above shows the gases soon after the barrier is removed. which statement describes the changes to the initial pressure of each gas and the final partial pressure of each gas in the mixture and also indicates the final total pressure?
This problem is describing the state two gases have when separated and together as shown on the attached picture. First of all, diagram 1 shows how they are separated in two containers with apparently equal volumes, whereas diagram 2 shows the removal of the barrier so that they get mixed together.
In this case, we can analyze that each gas has its own pressure and due to the removal of the barrier, both pressure and volume undergo a change. Thus, we can infer that the final volume is doubled with respected to the initial one for each gas, causing the pressure of each gas to be halved and the total pressure the half of the added ones, in agreement to the Boyle's law (inversely proportional relationship between pressure and temperature).
Therefore, the correct choice is:
C. The partial pressure of each gas in the mixture is half its initial pressure; the final total pressure is half the sum of the initial pressures of the two gases.
Learn more:
https://brainly.com/question/21184611Dividing the distance a wave travels by the time it takes to travel that distance gives you the wave’s speed.
True
False
Answer:
true
Explanation:
hope this helps
Four preparations involving table sugar (sucrose) are described below. Analyze the sugar preparation processes and the end products.
Sugar Water Sugar Floss Sugar Caramel Rock Sugar
Sugar is added to water, and the water is stirred until the sugar is no longer visible. Sugar is melted and blown with a fan to make thin threads of solid sugar. Pure sugar is melted and cooked until it changes color and becomes a thick, sticky liquid. A highly concentrated solution of sugar water is prepared, large sugar crystals are allowed to form slowly, and then dye is added.
Which of the following is evidence that a chemical reaction has taken place in one of the processes?
A.
the melting and re-solidification of sugar into threads, which are different from sugar’s natural cube-shaped crystals
B.
the slow growth of giant sugar crystals from a highly concentrated sugar-water solution and added dye
C.
the dissolution of solid sugar in water to form a thin, colorless, odorless liquid
D.
the color change that takes place after heat melts and begins to decompose the sugar
Answer:
b
Explanation:
Answer: d:the color change that takes place after heat melts and begins to decompose the sugar
Explanation:i did the study island
If a 435.767 g sample of bottled water contains 2.797 x 10-3 g of lead, what is the concentration of lead in the bottled water, in units of parts per million (ppm)
Answer:6.42 ppm
Explanation:ppm = (g soluto/g soluzione) ×1000000
Which is an example of a physical change?
A) Mixing blue and yellow paint to create green paint
B) Adding water and yeast to bread dough in order to make it raise.
C) Mixing two liquids together in a test tube and the tube becoming warm.
D) Adding a piece of chalk containing calcium carbonate to a glass of mild acid causing the information of a foam of bubbles.
I NEED THE ANSWER ASAP! Its science btw
Which statement describes conditions in which a mineral can form?
A. Crystals of minerals dissolve in the groundwater in caves.
B. Materials dissolved in seawater crystallize on an ocean bottom.
C. Molten materials are cooled in a netalworks factory
D. Materials are mined from deposits deep underground.
Answer:
b
Explanation:
how could you distinguish an element from a compound
Answer:
Elements are pure substances which are composed of only one type of atom. Compound are substances which are formed by two or more different types of elements that are united chemically in fixed proportions.
What is the chemical formula for ammonium carbonate?
what is Java ‽‽‽‽
[tex] \: [/tex]
Answer:
Java is a high-level, class-based, object-oriented programming language that is designed to have as few implementation dependencies as possible.
Explanation:
what is the context of that questing ?
just by itself 3 main answers :
an island
coffee from that island
a programming language
What do the carbon, oxygen, and nitrogen cycles all have in common? a. They all include an exchange of gases with the atmosphere. b. None of the cycles are biogeochemical cycles. c. They are all byproducts of photosynthesis. d. They all sustain life, but living organisms have no part in the cycle. Please select the best answer from the choices provided A B C D
A bar of copper (Copper = 0.385 J/g.°C) and a bar of aluminum (Aluminum = 0.897 J/g.°C) have the same mass. Which requires more energy to increase the temperature from 20°C to 30 °C?
Answer:
Aluminum
Explanation:
Distinguish between the first, second, and third ionization energies of an atom. b. How do the values of successive ionization energies compare
Answer:
The third ionization energy is the energy it takes to remove an electron from a 2+ ion. (That means that the atom has already lost two electrons, you are now removing the third.) And 2nd ionization energy is higher than 1st ionization energy, 3rd is higher than 2nd, and so forth.
hope it is helpful :)
A compound contains 70% by mass of iron and 30% by mass of oxygen.
What is its empirical formula?
(A: 0, 16; Fe, 56]
Answer:
FeO₂
Explanation:
hAVE A nice day
Explanation:
If we assume it's FexOy
Fe : O
70 : 30. (mass ratio)
x:y = 70/56 : 30/16. (mole ratio)
1.25 : 1.875
= 1.25/1.25: 1.875/1.25
= 1 : 1.5
=2 : 3
Therefore It's Fe2O3
Melting point of 20 g of ice
Answer:
6680 J
Explanation:
For accurate answer i will mark you a brainlist:D
How will you convert 85 cm to 85 m, choose one of the following option:
( Remember there is a decimal in 85 after 5)
Question 12 options:
Move the decimal in 85 TWO places to the right to decrease the value.
Move the decimal in 85 THREE places to the right to increase the value.
Move the decimal in 85 TWO places to the Left to decrease the value.
Move the decimal in 85 THREE places to the Left to decrease the value.
Answer:
welp it would be this option : Move the decimal in 85 TWO places to the right to decrease the value.
Explanation:
Answer:
Option A
Explanation:
Moving the decimal point 2 places to the right will give you 8500 cm=85m
the atomic number of RE is 75. the atomic mass of one of its isotopes is 186. how many neutrons are in an atom of this isotopes
Answer:
111
Explanation:
Answer:
I believe Rhenium has 111 neutrons in the atoms isotopes.
Explanation:
Which of the following best describes the cell below
plant cell
Protist cell
Eukaryotic cell
Prokaryotic cell
Answer:
Prokaryotic cell
Explanation:
If you search it up you will see that the prokaryotic cell looks exactly alike with the picture you have posted.
The letter for element Q stands for "qualium." What would the compound in 1a be called?
(1 A)
Answer:
ooooooooooo0000000000000
Choose all the answers that apply. According to Newton's second law of motion: objects at rest will remain at rest unless acted upon by an outside force the greater the magnitude of force, the faster the acceleration mass has an inverse relationship with acceleration every action has an equal and opposite reaction acceleration is caused by unbalanced forces
Answer: The answers aplicable would be
1) The greater magnitude of force, the faster the acceleration.
2) Acceleration is caused by unbalanced forces.
Infrared waves travel at a speed of 3.00 x 10^8 m/s. What is the frequency of an infrared wave
that has a vacuum wavelength of 5.5 micrometers?
(1 micrometer= 1x10^-6 m)
O 5.5 X 10^12 Hz
O 5.5 x 10^10 Hz
O 5.5 X 10^11 Hz
O 5.5 X 10^13 Hz
The frequency of the infrared wave at the given speed and wavelength is [tex]5.5 \times 10^{13} \ Hz[/tex].
The given parameters;
speed of the wave, v = 3 x 10⁸ m/swavelength of the wave, λ = 5.5 μmThe frequency of the infrared wave is calculated by using wave equation as shown below;
v = fλ
where;
f is the frequency of the wave[tex]f = \frac{v}{\lambda} \\\\f = \frac{3\times 10^8}{5.5 \times 10^{-6}} \\\\f = 5.5 \times 10^{13} \ Hz[/tex]
Thus, the frequency of the infrared wave at the given speed and wavelength is [tex]5.5 \times 10^{13} \ Hz[/tex].
Learn more here:https://brainly.com/question/18477700
Explain, in terms of particles, what happens when methane boils and why
the boiling point of methane is lower than that of butane.
Answer:Butane > ethane > methane, because between bigger molecules there are stronger van der Waals forces and also higher molar mass means they need to be given more energy to have enough kinetic energy to move quickly, freely in gas.
There are multiple butene isomers (Butene) and some (2-Butenes - cis and trans) actually have higher boiling point than n-Butane (there is also Isobutane, of course, with quite much lower boiling point than all of them) and some (1-Butene, Isobutylene) have lower, so this isn't really a fair or simple question. But on simplest level, it can again be said that 1-butene has lower boiling point because it has very similar shape but slightly lower molar mass (2H less) than n-butane.
Explanation:
Intermolecular forces such as dipole-dipole forces, London dispersion forces exist between molecules and these depend on strength of electronegativity of molecule. Therefore, methane converts to gas on boiling due to weak intermolecular forces of attraction between the molecules.
What is intermolecular forces of attraction?Intermolecular forces of attraction is force of attraction that make two molecule come closer. Intermolecular forces of attraction is directly proportional to the electronegativity of the molecule.
Size of electronegative molecule is small so, if any other molecule or molecule come into contact with this molecule then this molecule attract the electron of other molecule very efficiently and therefore the force between the molecule increases.
Molecules of methane have weak intermolecular forces of attraction. When energy is applied, the methane molecules easily break apart and turn into gas.
Therefore, methane converts to gas on boiling due to weak intermolecular forces of attraction between the molecules.
To learn more about intermolecular forces of attraction, here:
https://brainly.com/question/26701678
#SPJ2
In a few minutes, you will work with your partner to create three dances—one for each of the three phases. Each dance will represent the molecular freedom of movement of that particular phase.
If needed, navigate back to My Work to refer to your homework from Lesson 1.4. Then, begin brainstorming ideas for movements that would show these phases.
Dance ideas for solids:
Dance ideas for liquids:
Dance ideas for gases:
how does the ribosome know the sequence of amino acids
Answer:
The ribosome contains three grooves which are sites for the tRNA. The first codon is AUG, which is called a "start codon". ... So, the tRNA that has the anti-codon sequence of UAC carrying the amino acid Met bonds to the mRNA codon. Another tRNA bonds to the next codon in the next groove with the next amino acid
an empty aerosol can at 25°c still contains gas at 1.00 atmosphere pressure. if an empty can is thrown into a 475°c fire, what is the final pressure in the heated can?
The final pressure in the heated can is 2.51 atm
From the question given above, the following data were obtained:
Initial temperature (T₁) = 25 °C = 25 + 273 = 298 K
Initial pressure (P₁) = 1 atm
Final temperature (T₂) = 475 °C = 475 + 273 = 748 K
Final pressure (P₂) =?The final pressure can be obtained as illustrated below:
[tex] \frac{P_1}{T_1} = \frac{P_2}{T_2} \\ \\ \frac{1}{298} = \frac{P_2}{748} \\ \\ cross \: multiply \\ \\ 298 \times P_2 = 1 \times 748 \\ \\ divide \: both \: side \: by \: 298 \\ \\ P_2 = \frac{748}{298} \\ \\ P_2 = 2.51 \: atm[/tex]
Therefore, the final pressure in the heated can is 2.51 atm
Learn more: https://brainly.com/question/25763809
Why is partial pressure of oxygen greater at lower levels in water.
Answer:
Therefore, the partial pressure of oxygen at high altitudes is less than at sea level.
Explanation:
The deep ocean thus has higher oxygen because rates of oxygen consumption are low compared with the supply of cold, oxygen-rich deep waters from polar regions. In the surface layers, oxygen is supplied by exchange with the atmosphere.
How would you describe the solid-state in terms of motion (ability to move in the space and speed) and distance between molecules?
How would you describe the liquid state in terms of motion (ability to move in the space and speed) and distance between molecules?
How would you describe the gas state in terms of motion (ability to move in the space and speed) and distance between molecules?
In the gaseous state, the molecules are completely free because there is no intermolecular interaction between the molecules hence they translate at incredibly high velocity.
According to the kinetic theory of matter, the molecules that compose matter are in constant random motion. The nature of this motion varies in the three states of matter which are;
SolidLiquid and GasIn the solid state, the molecules do not translate, they only vibrate and rotate about their mean positions. In the liquids state, the molecules translate but they still have restricted degrees of freedom due to intermolecular interactions. In the gaseous state, the molecules are completely free because there is no intermolecular interaction between the molecules hence they translate at incredibly high velocity.
Learn more: https://brainly.com/question/6111443
What is true when a reaction has reached equilibrium?
A. The reaction has stopped.
B.The reaction is faster in the forward direction.
C. The reaction rate is equal in both directions.
D.The reaction is faster in the reverse direction.
A reaction is said to have reached equilibrium when the reaction rate is equal in both directions (c).
Like, take the example of copper in copper sulphate solution. When you add Cu to CuSO4 soln., there won't be any change occurring as the reaction rate is equal (Cu is added to CuSO4 soln., there won't be any change as displacement reaction won't take place due to Cu being the same metal as in CuS04 soln...their reaction is the same).
_____
RainbowSalt2222 ☔
