a 4000 kilogram truck travels in a straight line at 10 0 msec what is its momentum

Difference in Gravity of 7%

The near side of the Earth is 12740 km closer to the Moon than the far side. As a result, the near side experiences a gravitational force that is 7% stronger than the far side.The force that pulls items toward the centre of a planet or other entity is called gravity. All of the planets are kept in orbit around the sun by gravity.Differential gravitational forces, or gravitational forces that are not equal across a body's finite size, are the fundamental mechanism.

Radius of the earth, r = 6.37*10^6

by solving ((Fn-Ff)/Fn)*100 answer will be of 7%

learn more about gravitational forces here:

https://brainly.com/question/24783651

#SPJ4

The mass of the block on the table is 2.33 kg.

The Tension in the rope is 4.9 N.

The mass of the block on the table is calculated by applying Newton's second law of motion.

Newton's second law of motion states that the force applied on an object is directly proportional to the product of mass and acceleration of the object.

F = ma

where;

F(net) = ma

m₂g - m₁g = a(m₁ + m₂)

where;

m₂g - m₁g = m₁a + m₂a

m₂g  - m₂a = m₁a  + m₁g

m₂g  - m₂a = m₁(a + g)

3.6(9.8) - 3.6(2.1) = m₁(2.1 + 9.8)

27.72 = 11.9m₁

m₁ = 27.72 / 11.9

m₁ = 2.33 kg

The tension in the rope is calculated as follows;

T = m₁a

T = 2.33 kg x 2.1 m/s²

T = 4.9 N

Learn more about tension in rope here: https://brainly.com/question/187404

#SPJ1

The slope intercept form of given line is y = 1x+-1.

Solution:

y = mx+b

m = slope which is 1/1 because it is rise over run (rising 1, running 1)

b = y-intercept form which is -1 because that is where the line meets the y-axis.

The slope is the first number appearing in the equation. The slope is the coefficient of x, regardless of order. The intersection point is the point on the y-axis through which the slope of the line passes. The y-coordinate of the point where the line or curve intersects the y-axis. This is shown by writing the equation for the straight line y = mx+c. where m is the slope and c is the y-intercept.

The slope indicates how much the vertical changes for a given horizontal change. The shape of the slope intercept is actually equal to y plus MX plus b. It's called a slope-intercept shape because it has a slope and an intercept. The slope is defined as the ratio of the vertical change between two points to the horizontal change between the same two points.

Learn more about The slope here:- https://brainly.com/question/3493733

#SPJ1

Disclaimer:- Your question is incomplete,please see below for the complete question.

Write the slope-intercept form of the given line. Include your work in your final answer.

Line is Y = mx +c

where m=1

c = -1

When the particle reaches its maximum positive x coordinate, the displacement is 11.62m.

The rate at which speed of velocity change over time is referred to as acceleration. When a point and object speeds or decelerates, it is moving straight ahead. Motion on a circular accelerates even while the speed is constant so because orientation is constantly changing.

The particle's displacement is computed as follows;

v² = u² + 2as

where;

a is acceleration

a = √(3² - 2²)

= 2.23 m/s²

0 = u² + 2as

s = -u²/2a

s = -(7.2²)/(2 x 2.23)

s = -11.62 m

When the particle reaches its maximum positive x coordinate, the displacement is 11.62m.

To know more about Acceleration visit:

https://brainly.com/question/12550364

#SPJ1

Required value of initial speed of the bullet be ( 4M/m)√(gL).

Given parameters:

Mass of the bullet =m.

Mass of the bob of the pendulum = M.

speed of the bullet before collision = v

Speed of the bullet after collision = v/2.

Length of the pendulum stiff rod = L.

Let speed transmitted to the pendulum be u.

Using principle of conservation of momentum:

mv = Mu + mv/2

⇒ Mu = mv/2

⇒ u = (m/M)v/2

We know that: to make the bob over the top of the trajectory without falling backward in its circular path, required speed be = √(4gL). [ where g = acceleration due to gravity]

To be minimum initial speed the bullet must have in order for the pendulum bob to just barely swing through a complete vertical circle:

u = √(4gL)

⇒  (m/M)v/2 = √(4gL)

⇒ v =( 4M/m)√(gL).

Hence, minimum required  speed of the bullet be ( 4M/m)√(gL).

Learn more about speed here:

https://brainly.com/question/28224010

#SPJ1

When a block is launched with initial speed 2.2 m/s up a 35° frictionless ramp then ramp slides up to 0.43m.

The work-energy theorem explains that net work done by the forces on an object is equal to change in its kinetic energy.

We can also say that work done on a body is equal to the net change in its energy.

Given angle = 35°

initial speed = 2.2m/s

Applying work - energy theorem,

Wgravity = KE

-m *g *sin ∅ * S =1/2* (0- 2.2²)

-9.81*sin 35° *S= 1/2 *(0- 2.2² )

S= 0.43m

Ramp slides up to 0.43m.

To know more about work- energy theorem, refer

https://brainly.com/question/22236101

#SPJ13

The normal force on the 10 Kg box is 50 N. The one with the correct statement is Ben.

We know that normal force acting on an object is given as:

N = mg

Where angle projection is involve, it is written as:

N = mgSineθ

Where

Now, we shall calculate the normal force, to see who is right amongst the boys. This is shown below:

N = mgSineθ

N = 10 × 10 × Sine30

N = 100 × 0.5

N = 50 N

Thus, the normal force is 50 N. Therefore, Ben is correct!

Learn more about normal force:

https://brainly.com/question/14935759

https://brainly.com/question/28782331

#SPJ1

The time taken for the bicycle to come to a complete stop with an initial velocity of 13.5 m/s is 27 seconds.

Time can be defined as the calculable measure of motion with respect to before and afterness.

To calculate the time it takes the cyclist to bring the bicycle to complete stop, we use the formula below.

Formula:

Where:

From the question,

Given:

Substitute these values into equation 1

Hence the time taken for the bicycle to stop completely is 27 seconds.

Learn more about time here: https://brainly.com/question/10428039

#SPJ1

Option 1. Biological hazards (people working while ill, not washing hands, improper temperature control),  is the most common cause to food born illnesses.

Infectious organisms or their toxins are the maximum commonplace reasons for food poisoning. Food poisoning symptoms may additionally include cramping, nausea, vomiting, or diarrhea. Maximum meal poisoning is slight and resolves without treatment. ensuring ok hydration is the maximum vital element of treatment.

Foodborne infection (food poisoning) is a result of consuming contaminated meals, beverages, or water and may be a diffusion of microorganisms, parasites, viruses, and/or pollution. lots of those pathogens can be received thru extra than simply food, drinks, or water.

Learn more about food-born illnesses here:-https://brainly.com/question/535955

#SPJ1

The position and the velocity of the sandbag at a time 0.245 s after its release is 44.7 m and 2.599 m/s.

The position and the velocity of the sandbag at a time 1.15 s after its release are 38.52 m and -6.25 m/s.

The equations of motion can describe the relationship between the velocity, time, acceleration, and displacement of a moving object.

The equations of motions can be represented as:

[tex]v = u + at\\S = ut +\frac{1}{2}at^2\\ v^2-u^2=2aS[/tex]

Given, the maximum height of the sandbag, h = 40 m

The velocity of the sandbag moving upward, v = 5 m/s

Calculate the time taken by the ballon:

v = u -gt

0 = 5 -9.8×t

t = 0.51 s

The position of the sandbag at 0.245 s after its release:

[tex]y = h +v_ot-\frac{1}{2}gt^2[/tex]

[tex]y = 40 +5 -0.5\times 9.8\times (0.245)^2[/tex]

y = 44.70 m

The velocity of the sandbag at a time 0.245 s after its release:

v = v₀ - gt

v = 5 - (9.8)(0.245)

v = 2.599 m/s

The position of the sandbag at a time 1.15 s after its release:

[tex]y = h +v_ot-\frac{1}{2}gt^2[/tex]

[tex]y = 40 +5 -0.5\times 9.8\times (1.15)^2[/tex]

y = 38.52 m

The velocity of the sandbag at a time 1.15 s after its release:

v = v₀ - gt

v = 5 - (9.8)(1.15)

v = -6.25 m/s

The velocity is negative so the sandbag is going down.

Learn more about the equation of motion, here:

brainly.com/question/16982759

#SPJ1

The force acting on a body in space is zero, hence the acceleration of the friends in space will be;

The acceleration of a body is the rate of change of the velocity of the body.

The acceleration of a body, the mass of the body, and the force acting on the body are related by the formula below:

Mathematically:

Hence,

The force acting on a body in space = 0 N

For a person having a mass of 110 kg;

acceleration = 0 / 110

Acceleration = 0

For a person having a mass of 110 kg;

acceleration = 0 / 80

Acceleration = 0

Learn more about acceleration and force at: brainly.com/question/14343220

#SPJ1

If a body has the three forces acting upon it and is in equilibrium then the vector sum of the three forces is zero. Thus, (A) I only is the correct answer.

I. The vector sum of three forces is zero means that the vector sum of all the three forces is equal to resultant zero vector.

II. If two forces act in the same direction then the body experiences more force on that side and hence is not in equilibrium. For the body to be in equilibrium, then the resultant of any two forces should be opposite, equal and collinear with the third force.

III. For the body to be in equilibrium, magnitude along with direction should be mentioned. If the three forces are in the same plane, convergent (cross the same point) and non-parallel.

Hence, the body on which three forces is acting will be in equilibrium when the vector sum of three forces is zero.

To know more about the Equilibrium of Three Forces:

https://brainly.com/question/12947691

#SPJ1

Fluid friction is an opposition to the ease movement of fluids known as viscosity.

Fluid friction describes the friction between layers of a viscous fluid that are moving relative to each other.

Typically, fluid friction is a type of friction that exist in fluids and it is known as viscosity.

Fluid viscosity can be defined as the type of friction that act on fluid. It can also be defined as the measure of the resistance of a fluid to gradual deformation by shear or tensile stress.

Thus, the fluid friction is equal to fluid viscosity and it is the type of friction that exists only in fluids.

Learn more about fluid viscosity here: https://brainly.com/question/2568610

#SPJ1

After completing a workout/activity, it is best to use Static stretching.

Static stretching is most effective at the quit of your workout. It includes stretches that might be held for a period of time to help extend and unfasten your muscle mass and connective tissue. that is special from a dynamic warmup due to the fact you hold your body nonetheless.

It is a good concept to do dynamic stretching before a workout, and static stretching after a workout, irrespective of what type of exercise you're doing. What you need to differ based on your workout is which muscle groups you are running, on account that it's crucial to warm up the muscle mass you are certainly going to be using.

A dynamic stretching heat-up gets you prepared for something exercising you're approximate to accomplish this is the first-rate form of stretch before an exercising while static stretching is quality for the stop of your workout.

Learn more about stretching here:-https://brainly.com/question/27356012

#SPJ1

a) angular frequency of the motion is ω = 3.5s⁻¹

b) total mechanical energy of the bob is T.M.E = 0.029J

c) bob's speed at the lowest point is V= 0.43m/s.

A mechanical device that oscillates or sways is known as a simple pendulum. The gravitational force is primarily responsible for this motion, which takes place in a vertical plane.

Given,

Length of a simple pendulum, L = 0.80m

Mass of the bob, m = 0.31 kg

h= L- LcosΘ = L (1 - cosΘ)

a) Angular frequency, ω = 2π / T

where, T = 2π √(L/g)

ω = 2π / 2π √(g/L)

ω =√(9.8 / 0.80) s⁻¹

ω = 3.5s⁻¹

b) Total mechanical energy, T.M.E = (K.E.)ₐ + (P.E.)ₐ

As (K.E.)ₐ = 0

(P.E.)ₐ =mgh

T.M.E = 0 + mgh, where h = L (1-cosΘ)

T.M.E = ngL (1-cosΘ)

= 0.31*9.8*0.80(1-0.988)

= 0.029J

Thus, T.M.E = 0.029J

c) bob's speed at the lowest position, V

TMEb = 0.029J

(KE)b + (PE)b = 0.029J

1/2mV² + 0 = 0.029J

V =√(2*0.029/m)

V = 0.43m/s

So, the speed at the lowest point is V= 0.43m/s.

Learn more about simple pendulums here:

https://brainly.com/question/14759840

#SPJ1

The mass of the other object is 18.11 kg and their acceleration  will be respectively 5.8 × 10⁻⁸ m/s² and 17.66× 10⁻⁸ m/s².

Given parameter:

The gravitational force between two objects : F = 3.2×10⁻⁶ N.

Distance between two objects : r =  2.1x10⁻¹ m.

The mass of one object m₁ = 55 kg.

The mass of other object m₂ =?

From universal gravitational law, we know that, force acting between two objects of mass m₁ and m₂ separated by a distance r is:

F = G m₁ m₂ / r²

Where, G = universal gravitational constant = 6.67 × 10⁻¹¹ N m⁻² kg⁻².

So, we can write,

 3.2×10⁻⁶ N = (6.67 × 10⁻¹¹ N m⁻² kg⁻²) (55 kg) m₂/( 2.1x10⁻¹ m)

⇒ m₂ = (3.2×10⁻⁶ N ×  2.1x10⁻¹ m )/ { (6.67 × 10⁻¹¹ N m⁻² kg⁻²) (55 kg)}

= 18.11 kg.

Hence, the mass of the other object is 18.11 kg.

So, acceleration of the object of mass 55 kg is:

a₁ = F/m₁ = 3.2×10⁻⁶/55  m/s² = 5.8 × 10⁻⁸ m/s².

The acceleration of the object of mass 18.11 kg is:

a₂ = F/m₂ = 3.2×10⁻⁶/18.11 m/s² =  17.66× 10⁻⁸ m/s².

Hence, their acceleration if they are released from their position will be respectively 5.8 × 10⁻⁸ m/s² and 17.66× 10⁻⁸ m/s².

Learn more about acceleration here:

https://brainly.com/question/12550364

#SPJ1

Following combinations of elements that can form a covalent bond are:

N and Cl

C and O

Elements with very high ionization energies cannot transfer electrons, and elements with very low electron affinities cannot accept electrons. Atoms of such elements tend to share electrons with atoms of other elements or with other atoms of the same element, and both atoms acquire an octet arrangement in their respective valence shells, achieving stability increase. Such associations by sharing electron pairs between different species or the same species are known as covalent bonds.

Covalent bonds can be achieved in two ways.

To know more about covalent bonds visit:

https://brainly.com/question/10777799

#SPJ13

Answer:

the formula of acceleration

The period of Jupiter is known to be 11.9 years then the average distance of Jupiter to the Sun is given to be  5.21 AU.

Kepler's laws of planetary motion :

According to this law, the semi-major axes of the planets' orbits are directly proportional to the squares of the planets' orbital periods.

period of the Jupiter = 11.9 years

radius of the earth = 1 AU

orbital period of the earth = 1 year

According to the Kepler's 3rd law of planetary motion :

T² ∝ R³

T² = k R³

k = T²/ R³

[tex]k = \frac{T^2_j}{R^3_j} = \frac{T^2_e}{R^3_e}[/tex]

T² /(R)³ = (1)² /(1)³

Rj  =  [tex]T^{\frac{2}{3}}[/tex]

T = 5.21 AU

The period of Jupiter is known to be 11.9 years then the average distance of Jupiter to the Sun is given to be  5.21 AU.

To know more about  Kepler's law:

brainly.com/question/1608361

#SPJ1

Answer: the moon is closer.

Explanation:

The moon is closer to the earth than the sun, which results in a larger gravitational gradient for the moon even though the sun is considerably more massive and has stronger overall gravity than the moon.

The velocity of Car B after the collision is 4.856 m/s.

What is elastic collision?

A collision is considered elastic if it does not result in a net decrease in the system's kinetic energy. In an elastic collision, both momentum and kinetic energy are conserved.

In an elastic collision, the kinetic energy is essentially unchanged before and after the contact and is not changed into another type of energy.

Either one dimension or two dimensions are possible. Perfectly elastic collision is not feasible in reality since there will always be some energy exchange, no matter how tiny.

m1v1 + m2v2 = m1u1 + m2u2; where

m1= mass of object 1

m2= mass of object 2

v1= initial velocity object 1

v2= initial velocity object 2

u1= final velocity object 1

u2= final velocity object 2

m1v12/2 + m2v22/2 = m1u12/2 + m2u2/2

281·2.82 - 209·1.72 = 281u1 + 209u2;

281·2.822 + 209·(- 1.72)2 = 281u12 + 209u22;

281u1 + 209u2 = 432.94 and 281u12 + 209u22 = 2852.93

u1 = 1.05407 - 0.74377u2;

u1 = (10.15278 - 0.74377u2)1/2

u2 = 4.856 m/s

To know more about elastic collision, click on the given link

https://brainly.com/question/7694106

#SPJ9

Answer:

c

xExplanation:

Answer:

The tension in the cable is 1800 N.

Explanation:

Luka Doncic will score the 3 points if he throws a ball from a 3-point line distance (6.75 m) and if the basket is at height of 3.05 m.

Resolving u into its vertical and horizontal components

ux = u cos θ

ux = 8.3 cos 45°

ux = 5.9 m / s

uy = u sin θ

uy = 8.3 sin 45°

uy = 5.9 m / s

H = 3.05 - 2.8

H = 0.25 m

T = uy + √ uy² - 2 g H / g

T = 5.9 + √ 5.9² - ( 2 * 9.8 * 0.25 ) / 9.8

T = 5.9 + √ 34.81 - 4.9 / 9.8

T = 5.9 + 5.47 / 9.8

T = 11.37 / 9.8

T = 1.16 s

R = ux T

R = 5.9 * 1.16

R = 6.8 m

Distance of three point line from the basket = 6.75 m = 6.8 m = R

Therefore, Luka Doncic will score the 3 points

To know more about projectile motion

https://brainly.com/question/11049671

#SPJ9

When the water level at the dam is 41 m, 1435J of electrical power can be generated if hydroelectric turbines are placed close to the base of the dam and a constant flow rate of 35 m3/s is maintained.

There are two kinds of electricity, including: DC power is created by DC sources like generators, batteries, battery storage, etc. and is defined as the result of voltage and current. AC power is a term used to describe a charge flow that periodically changes its direction.

The pace at which work is completed or energy is changed inside an electrical circuit is known as the electric power definition. It is a way to quantify how much energy is consumed over a certain period of time. Electrical power is the term used in physics to describe the rate at which an electrical circuit transfers electrical energy per unit of time.

To know more about electrical power visit:

https://brainly.com/question/13948282

#SPJ1

Answer: the lungs

Explanation: During gas exchange oxygen moves from the lungs to the bloodstream. At the same time carbon dioxide passes from the blood to the lungs. This happens in the lungs between the alveoli and a network of tiny blood vessels called capillaries, which are located in the walls of the alveoli.

3) unit of the following are :

a) force = Newton

b) distance = meter

c) work = Joule

4) 90 J work has been done by her

5) 51 J work was done

6) He have done  [tex]10^{4}[/tex] J  of work

7) no work is done

8) no work is done

9) 700 J is the work done on the car

10) 10.68 N  force is applied

3 ) unit of the following are :

a) force = Newton

b) distance = meter

c) work = Joule

4 ) work done = force * displacement

                       = 75 * 1.2 = 90 J

5 )  work done = force * displacement  

                        = 15 * 3.4 = 51 J

6 ) work done = force * displacement  

                        = 100 * 100 = [tex]10^{4}[/tex] J

7) no work is done because no displacement occurred

8)  no work is done because no displacement took place

9) work done = force * displacement

                        = 12.5 * 56 = 700 J

10)  force = work done / displacement

                = 142 / 13.3 = 10.68 N

To learn more about force here :

https://brainly.com/question/7362815

#SPJ1

The answer is 5.6 ohms.

The electrical resistance of a circuit component or device is defined as the ratio of the applied voltage to the current through it. If the resistance is constant over a considerable voltage range. This is shown below. To calculate the total resistance of multiple resistors connected in this way, add the individual resistances.

calculation:-

V = iR

R = V/I

= 33.10/6

5.6.

Wire resistance is proportional to resistance and length and inversely proportional to wire cross-sectional area. To determine the condition of a circuit or component. The higher the resistance, the lower the current flow, and vice versa. Resistance is a measure of resistance to the flow of current in an electrical circuit. Resistance is measured in ohms and represented by the Greek letter omega.

Learn more about Resistance here:-https://brainly.com/question/17563681

#SPJ9

Answer:

highest point

Explanation:

at highest point , ball stops moving, velocity = 0

KE = 1/2 m v^2

     = 1/2 m ( 0)^2 = 0    at highest point

With the use of a magnetometer, the magnetism or magnetic field of the human body can be measured or demonstrated.

A magnetometer is a device used to measure the magnetic field or the magnetic dipole moment. Magnetometers of various sorts measure the direction, intensity, or relative change of a magnetic field at a specific area.

A magnetometer is a scientific tool that measures the intensity of magnetic fields. Magnetometers may be used on land to locate iron ore reserves for mining.

Magnetometers are instruments that can detect the amount or direction of a magnetic field. They may be found practically anywhere in electronics. They might be as basic as the one used by your smartphone to identify whether it is upright or as complicated as the one used by NASA to assess Mars' magnetic field.

Learn more about Magnetic Fields:
https://brainly.com/question/14848188
#SPJ1