A 5.00 mL sample of barium hydroxide is titrated to the phenolphthalein endpoint using hydrochloric
acid. The five mL sample requires 18.02 mL of 0.0873 M HCl solution to reach the endpoint. What is the
concentration of the Ba(OH)2 solution?

There is no reaction between zinc II sulfate and magnesium sulfate.

We know that a reaction is said to occur when two species are combined and there are new products that appear in the system. This implies that if there are no new substances that appear in the system we can not say that a chemical reaction has taken place.

In this case, we can see that we can not be able to observe any change when wee mix a solution of magnesium sulfate and zinc II sulfate since the both of them have the same anion.

Learn more about reaction:https://brainly.com/question/28984750

#SPJ1

Methane has covalent bonds. Carbon has four valence electrons, so it can bond with four hydrogen atoms, each of which has one valence electron. The carbon atom is more electronegative than the hydrogen atoms, so it attracts the electrons in the bonds more strongly than the hydrogen atoms do.

What is covalent bond ?

A covalent bond consist of the mutual sharing of one or more pairs of electrons between two atoms.

Carbon has four electrons in its  valence shell ( it needs four electrons to fill its valence electron ) and Hydrogen have one electrons in its valence shell ( and needs two electrons ) . So Carbon shares total four electrons , one with each Hydrogen and all four Hydrogen shares their one electrons with carbon.

Hence , covalent bonding is present in methane molecule.

To learn about covalent bonding from the given link

https://brainly.com/question/3447218

#SPJ9

The mass of oxygen gas consumed if 5.30 g of ethanol is involved in the reaction would be 3.68 grams.

The souring of wines through the reaction of the ethanol component with oxygen is a chemical reaction that is expressed by the following equation:

[tex]CH_3CH_2OH + O_2 -- > H_2O + CH_3COOH[/tex]

The equation already obeys the law of conservation of mass. Thus, it is a balanced reaction in which the mole ratio of the ethanol that reacts and the oxygen that is consumed is 1:1.

If, mole = mass/molar mass; the mole of 5.30 g of ethanol can be deduced as follows:

Molar mass of ethanol = 46.07 g/mol

Mole of 5.30 g ethanol = 5.3/46.07

                                      = 0.1150 mol

Since the mole ratio of ethanol and oxygen is 1:1, the equivalent mole of oxygen that is consumed in the reaction would also be 0.1150 mol.

If, mass = mole x molar mass; then the mass of 0.1150 mol oxygen can be deduced as follows:

Molar mass of oxygen = 32 g/mol

Mass of 0.1150 mol oxygen = 0.1150 x 32

                                             = 3.68 grams

Thus, the mass of oxygen that will be consumed by the reaction of 5.30 grams of ethanol is 3.68 grams.

More on stoichiometric problems can be found here: https://brainly.com/question/15047541

#SPJ1

Answer:

i think sulfur fluoride

Rocks formed by the process of erosion, deposition, and compaction of sediments are called Sedimentary Rocks.

The three main types of rocks are Igneous, Sedimentary, and metamorphic rocks. They are formed on or near the Earth’s surface from the compression of ocean sediments or other processes.

Igneous rocks are formed when hot, molten rock crystallizes and solidifies after cooling down. When these rocks are weathered due to the process of erosion, deposition, and compaction of sediments they turn into  Sedimentary rocks. These types of rocks generally consist of fossils. When the sedimentary rocks are subjected to tremendous temperature and pressure they get converted into metamorphic rocks. The metamorphic rocks when get ejected out of the volcano in the form of hot magma turn into igneous rocks on cooling. This cycle of rocks continues.

Read more about the Cycle of rocks:

brainly.com/question/22142661

The mass of the precipitate that can be recovered from the reaction is 2.2 g

We know that we have to obtain the number of moles of both of the reactants and then this would help us to determine the limiting reactant. When we determine the limiting reactant, we can now use it to obtain the theoretical yield of the reaction and this would help us to be able to get the actual yield which is what the question is about.

Number of moles of barium chloride = 25/1000 * 0.5 = 0.0125 moles

Number of moles potassium sulfate= 50/1000 * 0.25 = 0.0125 moles

Given that the reaction is 1:1, we can see that the theoretical yeild of the barium sulfate product is obtained from;

Theoretical yield= 0.0125 moles * 233 g/mol = 2.9 g

We already know that the formula to obtain the percentage yield is;

Actual yield/ theoretical yield * 100/1

We would now substitute the values and obtain; x/2.9 * 100 =75

Where x = actual yield of the reaction.

x = 75 * 2.9/100

x= 2.2 g

Thus we obtain 2.2 g.

Learn more about theoretical yield: https://brainly.com/question/12704041

#SPJ1

The polar molecules are A and D while the non polar molecules are B C E F.

We know that the polar molecules are the molecules that have a structure that is not symmetrical. If a compound is seen to be symmetrical then such a compound can not be a polar molecule. This what we have to look out for in each of the compound.

We would look at a compound as symmetrical if the compound is able to have the same groups that are attached to it in such a way that the attached groups are indistinguishable from each other. If we label the molecules from A to F we can locate the molecules that are polar and non polar.

Learn more about polar molecules:https://brainly.com/question/15173422

#SPJ1

According to electronic configuration , atomic size within a period decreases from left to right as electrons are added to same shell while in group it increases as new shell is added in each successive element in group.

Electronic configuration is defined as the distribution of electrons which are present in an atom or molecule in atomic or molecular orbitals.It describes how each electron moves independently in an orbital.

Knowledge of electronic configuration is necessary for understanding the structure of periodic table.It helps in understanding the chemical properties of elements.

Learn more about electronic configuration,here:

https://brainly.com/question/13497372

#SPJ1

The temperature at which the gas will occupy a volume of 2.5L is 472°C.

Charle's law states that "the volume of a fixed mass of gas held at constant pressure varies directly with the absolute temperature".

i.e we get [tex]$V_1[/tex]/[tex]$T_1[/tex] =[tex]$V2_1[/tex]/[tex]$T_2[/tex] .

Now, we have [tex]$V_1[/tex]= 1.0L, [tex]$T_1[/tex] = 25°C = (25+273) K = 298 K

                        [tex]$V_2[/tex]  = 2.5L, [tex]$T_2[/tex]  = ?

Let's substitute these values in the above equation,

[tex]$V_1[/tex]/[tex]$T_1[/tex] = [tex]$V_2[/tex]/[tex]$T_2[/tex]

1.0/298 = 2.5/[tex]$T_2[/tex]

[tex]$T_2[/tex] = 2.5 X 298

[tex]$T_2[/tex] = 745 K

OR

[tex]$T_2[/tex] = 745-273 = 472°C

Thus, the temperature at which the gas will occupy a volume of 2.5L is 472°C.

Read more about Charle's law:

brainly.com/question/16927784

1 is the maximum number of electrons in an atom that can have the follow set of quantum numbers.

According to Pauli's Exclusion Principle, no two electrons in the same atom can have the same values for all four of their quantum numbers. In other words, no more than two electrons can occupy the same orbital at the same time, and the spins of two electrons in the same orbital must be opposite. Bosons include photons, gravitons, and gluons.

Quantum numbers are the set of numbers used to describe the position and energy of an electron in an atom. There are four types of quantum numbers: principal, azimuthal, magnetic, and spin. There are four quantum numbers in atoms: the principal quantum number (n), orbital angular momentum quantum number (l), magnetic quantum number (ml), and electron spin quantum number.

To learn more about quantum numbers, here

https://brainly.com/question/16977590

#SPJ1

Answer: C

l

2

→

H

C

l

O

C

l

2

→

2

H

C

l

O

(Cl balance)

C

l

2

+

2

H

2

O

→

2

H

C

l

O

(O balance)

C

l

2

+

2

H

2

O

→

2

H

C

l

O

+

2

H

+

(H balance)

C

l

2

+

2

H

2

O

→

2

H

C

l

O

+

2

H

+

+

2

e

−

(Charge balance)

C

l

2

+

2

H

2

O

→

2

H

C

l

O

+

2

H

+

+

2

e

−

balanced half-reaction)

Explanation:

The approximate diameter of each cell, given the number of cells and the diameter of the field of view, is c) 500 µm.

Cells are very small organisms and so they are measured in small units called micrometers. Micrometers are 1, 000 times smaller than millimeters. The diameter of the field of view is 1. 5 millimeters which means that combined, the diameter of these three cells will add up to 1. 5 millimeters in total.

Because cells have their diameter measured in micrometers, there is a need to convert the diameter of the field of view, from millimeters to micrometers:

= 1. 5 millimeters x 1, 000 micrometers per millimeter

= 1, 500 micrometers

The approximate diameter of each of the three cells is therefore :

= Diameter of the field of view / Number of cells

= 1, 500 micrometers / 3

= 500 micrometers

= 500 µm

Find out more on the diameter of a cell at https://brainly.com/question/28039613

#SPJ1

When a reaction's heat is calculated under constant pressure, it equals the enthalpy change. At constant volume or constant pressure, a chemical reaction produces an enthalpy change, which is a heat change.

Enthalpy change indicates how much heat was absorbed or released during the reaction. It is shown by the H. Franklin Electric Sub drive series of constant constant pressure systems, which adjust the pump's speed to suit changing water demand while maintaining constant pressure throughout the system. In sub drive systems, a pressure sensor measures the water pressure, transmits a controller, and controls the pump's speed. Although no work is done when a reaction is conducted in a bomb calorimeter at constant volume, the pressure inside the calorimeter may change.

Learn more about enthalpy here

https://brainly.com/question/13996238

#SPJ4

The molar mass of the given gas is equal to 68.48 g.

The ideal gas law can be described as an equation of the state of a hypothetical perfect gas. This equation can be represented as the product of the volume and pressure of one-mole perfect gas is equal to the product of the universal gas constant and absolute temperature of that gas.

The mathematically, ideal gas equation can be written as follows:

PV = nRT

Where n is the moles of gas, P is the pressure,  V is the volume of the gas,  and R is the gas constant.

Given, the volume of collected gas, V = 165 ml = 0.165 L

The temperature of the gas, T = 27° C = 273 + 27 = 300 K,

The pressure of gas, P = 765 mmHg = 0.99 atm

The value of the gas constant, R = 0.082 atm L /K mol

Substituting the values V, R, P, and T in the equation, we get:

The number of moles of the gas, n = PV/RT

n = 0.99 ×0.165/(0.082 × 300)

n = 0.0066 mol

The molar mass of the gas = 0.452/ 0.0066 =68.48 g/mol

Learn more about the ideal gas equation, here:

brainly.com/question/3637553

#SPJ1

Taking into account the definition of molarity, the concentration of the NaCl solution is 0.576 moles/L.

Molarity is a measure of the concentration of a solute that indicates the number of moles of solute that are dissolved in a given volume.

The molarity of a solution is calculated by dividing the moles of solute by the volume of the solution:

molarity= number of moles of solute÷ volume

Molarity is expressed in units moles/ L.

In this case, you know that:

Replacing in the definition of molarity:

molarity= 0.144 moles÷ 0.250 L

Solving:

molarity= 0.576 moles/L

Finally, the molarity in this case is 0.576 moles/L.

Learn more about molarity:

brainly.com/question/9324116

brainly.com/question/10608366

brainly.com/question/7429224

#SPJ1

the temperature of gas is [tex]4.14^{o}[/tex]K

The temperature can be calculated as follows:

we using the ideal gas Law where PV = nRT, we just need to subtitute the value

PV = nRT where the universal gas constant is 0.082[tex]L.atm.mol^{-1}.K^{2}[/tex]

1.3 atm x 1.7 L = 6.5 moles x 0.082[tex]L.atm.mol^{-1}.K^{2}[/tex] x T

T= [tex]\frac{1.3 atm X 1.7 L }{6.5 X 0.082 L.atm.mol^{-1}K^{-1} }[/tex]

T= [tex]4.14^{o}[/tex]K

hence the temperature of gas in K is [tex]4.14^{o}[/tex]K

Learn more on ideal gas law here

https://brainly.com/question/24183486

#SPJ1

The formulas below correctly represent the ionic compounds of the elements involved in CSCI Na3P Al2S3.

For binary ionic compounds, the compounds are named by writing the cation name first, followed by the anion name. For example, KCl, an ionic compound containing K+ and Cl- ions, is called potassium chloride. Consider the electronegativities of two related atoms. The greater the difference, the more ionic the bond.

For a compound as a whole, its polarity can be considered from the configuration of the polar bonds through the molecular conformation. An ionic bond is formed when an electron moves from one atom to another. Ions of different elements can be combined by forming ionic bonds. Cations and anions are formed when atoms lose or gain electrons.

Learn more about The ionic compounds here:-https://brainly.com/question/2687188

#SPJ9

Answer:

BeH2=sp

SF6=sp3d2

PO43−=sp3

PCl5=dsp3

Explanation:

The hybridization states of each of the central atoms are;

a) sp

b) [tex]sp^3d^2[/tex]

c)[tex]sp^3[/tex]

d) [tex]sp^3d[/tex]

When we talk about the idea of hybridization in chemistry what we are talking about is the way that there could be the mixing of the orbitals so that we could obtain the orbitals that have the kind of energy that is required for a reaction to occur.

In this case, we know that the hybridization of the central atom would determines the shape of the molecule and this is a very important thing to know.

Learn more about hybridization:https://brainly.com/question/14140731

#SPJ4

The energy is required to completely separate an electron from a proton that is 200 pm away is 1.15 × 10⁻¹⁸ J.

the energy expression is given as :

E = K q1 q2 / r

where,

K = 9 × 10⁹ Nm²C⁻²

q1 = charge of proton = 1.6 × 10⁻¹⁹ C

q2 = charge of electron = -  1.6 × 10⁻¹⁹ C

r = distance = 200 × 10⁻¹² m

substituting the values :

E = (9 × 10⁹ ×  1.6 × 10⁻¹⁹ ×  -  1.6 × 10⁻¹⁹ ) / 200 × 10⁻¹²

E = 1.15 × 10⁻¹⁸ J

Thus, The energy is required to completely separate an electron from a proton that is 200 pm away is 1.15 × 10⁻¹⁸ J.

To learn more about electron and proton here

https://brainly.com/question/2199623

#SPJ1

Molecules can any forms of energy, except light energy.

The ability to do work is called as energy. Work done is product of force and displacement. Energy is of different types as sound energy, kinetic energy, potential energy, electrical energy, light energy etc.

Law of conservation of energy states that energy can neither be created nor destroyed, but it can be transferred from one form to another.

Molecules can move so they show kinetic energy, molecules can be there at many positions so they can show potential energy, molecules can vibrate so they can show sound energy but molecules can only absorb light hence they can't have light energy.

Given options are-

A. light energy

B. Chemical energy

C. Sound energy

D. Kinetic Energy

Therefore, Molecules can any forms of energy, except light energy.

Learn more about energy, here:

https://brainly.com/question/1932868

#SPJ2

The color of marker that is the least polar is the red dye because it shows the least interaction with the polar chromatography paper and the most interaction with the non-polar solvent.

The dyes that are most likely in the unknown sample are the blue and yellow dyes because the two spots produced by the unknown sample traveled almost the same distance as the blue and yellow dyes.

The most likely color of marker that the student tested is yellow.

Chromatography is a separation technique used to separate colored substances by means of their interactions with mobile solvent phase and a non-mobile solid phase.

The dye that has the most interaction with the solvent phase will travel farther in the chromatographic column whereas the dye that has the least interaction with the solvent will travel the least distance.

Learn more about chromatography at: https://brainly.com/question/1394204

#SPJ1

The weak (monoprotic) acid splits into its conjugate base and a proton; because the protons originated from the weak acid, the conjugate base that forms must be equimolar with the protons released into the solvent.

HA⇌A +H+

How can you tell whether kind of acid is a weak acid?

Based on its molar mass, pKa (determined from points on a titration curve), combined with its approximative melting point, you can determine your weak acid.

How can the concentration of an unidentified weak acid be determined?

Purpose: Titration with a standardized NaOH solution is used to determine the composition and identity of an unknown weak acid. where Mt is the titrant's concentration, Vt is its volume, and added titrant, Mx is the amount of the unidentified weak acid that is titrated, Mx is its concentration, and Vx is its volume.

To know more about Titration, visit-https://brainly.com/question/16254547

#SPJ13

Explanation:

Using Ideal Gas Equation

PV=nRT

P = 15.7, V = 50L, T = 21 +273= 294K, n=?, R= 0.8206atmK^-1mol^-1

n = PV/RT = (15.7 × 50) / (0.8206 × 294) = 3.25mol

n = m/M, m=?, M= 16(2) = 32, n = 3.25

m = nM = 3.25 × 32 = 104g

104 grams of oxygen (O2) gas are there in a 50.0 L tank at 21.0c when the oxygen pressure is 15.7 atm.

Ideal gas is also called as real gas. The ideal gas equation is PV = nRT. Where, P is the pressure, V is the volume, n is the number of moles of gas, R is the ideal gas constant, and T is the temperature in Kelvin.

Ideal gas molecules do not attract or repel each other. The pressure of a gas times its volume same to the number of moles of the gas times a constant (R) times the temperature of the gas.

By using Ideal Gas Equation

PV = nRT

Pressure = 15.7,

Volume = 50L,

Temperature = 21 +273

= 294K,

n=?,

R= 0.8206atmK^-1mol^-1

n = PV/RT

= (15.7 × 50) / (0.8206 × 294)

= 3.25mol

n = m/M, m=?,

M= 16(2)

= 32, n = 3.25

m = nM

= 3.25 × 32 = 104g

Thus, 104g grams of oxygen (O2) gas are there in a 50.0 L tank at 21.0c when the oxygen pressure is 15.7 atm.

To learn more about an ideal gas equation, follow the link;

https://brainly.com/question/17254541

#SPJ2

Answer:

explain how the electron was discovered

The direction of polarity of C-N is C to N

The direction of polarity of  F-N is N to F

The direction of polarity of F - C is is C to F

The direction of polarity in C - N is from C to N. the Nitrogen is more electronegative than the carbon. the carbon gets partially positive charge and the nitrogen gets partially negative charge.

The direction of polarity in F - N is from nitrogen to fluorine. the fluorine is more electronegative than the nitrogen so nitrogen gets partial positive and F have partial negative.

The direction of polarity of F - C is from carbon to fluorine because fluorine is more electronegative than carbon.

Thus, The direction of polarity of C-N is C to N

The direction of polarity of  F-N is N to F

The direction of polarity of F - C is is C to F

To learn more about polarity here

https://brainly.com/question/1946554

#SPJ1

Answer:

There are a few key factors to consider when designing a successful supply drop for Futura Amplify:

1. Make sure the drop is easily accessible for the intended recipients. If it is too difficult to reach, they may not be able to get to it in time.

2. Make sure the drop is large enough to accommodate the supplies you are sending. If it is too small, the supplies may not fit and may be lost or damaged.

3. Make sure the drop is well-protected from the elements. If it is exposed to the elements, the supplies may be damaged or lost.

Explanation:

Make sure the recipients of the drop can easily access it.

Amplifier is defined as a piece of electrical equipment that reacts to a variety of tiny input signals like power, voltage, or current. To raise a signal's amplitude, amplifiers are used in computers, audio equipment, music equipment, and electronic devices like television and radio receivers.  Without altering the frequency or wave shape of the waveform, an amplifier is used to boost the amplitude of a signal waveform.

They might not be able to get there in time if it is too challenging to get to. To ensure that the materials you are shipping fit, make sure the drop is big enough. The materials might not fit and could be damaged or lost if it is too tiny. Ensure that the drop is adequately shielded from the elements. The goods could become lost or destroyed if they are exposed to the elements.

Thus, make sure the recipients of the drop can easily access it.

To learn more about amplifier, refer to the link below:

https://brainly.com/question/16795254

#SPJ2

Explanation:

V = kn

V1/n1 = V2/n2

V1 = 125ltrs, n1 =6 moles, n2 =?, V2 = 175ltrs

n2 = V2.n1/V1 = (175 × 6) ÷ 125

= 8.4 moles

The helium must be added to a balloon currently holding 6.00 moles in order to increase its volume from 125 liters to 175 liters is 8.4 moles.

The International System of Units uses the mole as the unit of material quantity. How many elementary entities of a certain substance are present in an item or sample is determined by the quantity of that material. It is specified that the mole contains precisely 6.023 × 10⁻²³

An SI unit that connects the microscopic and macroscopic worlds is the mole. It enables researchers to measure vast numbers of extremely tiny objects, such atoms or molecules. Initially, measurements of chemical elements or compounds were expressed in terms of "gram-atom" and "gram-molecule" units.

However, the Latin term moles, which meaning "a mass," is where the word mole ultimately originates, not from German.

v₁ ÷ n₁ = v₂ ÷ n₂

v₁ = 125l,

n₁ =6 moles,

n₂ =?,

v₂ = 175l

n₂ = v₂.n₁ ÷ v₁ = ( 175 × 6 ) ÷ 125

= 8.4 moles

Thus,The helium must be added to a balloon currently holding 6.00 moles in order to increase its volume from 125 liters to 175 liters is 8.4 moles.

To learn more about mole, follow the link;

https://brainly.com/question/26416088

#SPJ2

88 is the nearest whole number [tex]88\frac{196}{480}[/tex].

Rounding is a process to estimate a certain number in a context. To determine how to round a number, look at the next digit in the appropriate position; if it is less than 5, round down, and if it is more than 5, round up.

The major figures of a particular number are those key or significant digits that accurately represent the meaning of the number.

[tex]88\frac{196}{480}[/tex] is mixed friction.

Changing the mixed fraction into improper fraction number by :

Multiplying 88 × 480 = 42,240

Adding 196 to this number = 42240 + 196

= 42,436/480

= 88.40

≈ 88

To know more about rounding up numbers and significant digits, visit:

https://brainly.com/question/1658998

#SPJ1

Answer:

Explanation:

tt