The magnitude of the force exerted on the man by the lawn mower is equal in magnitude to the force exerted by the man on the lawn mower, thus the answer is the third option i.e. the same.
Following are the three Newton's Law of Motion:
First Law - Newton’s first law of motion states that if a body or a object is at rest or moving at any constant speed in a straight line, it will remain at rest or keep moving in that straight line at that constant speed unless it is acted upon by a force. This law is known as Law of Inertia.
Second Law - Newton’s second law of motion is a quantitative description of the changes that any force can produce/insert on the motion of a body. It states that the timely rate of change of the linear momentum of a body is equal in both the magnitude and the direction to the force imposed on it.
Third Law - Newton’s third law of motion states that when two bodies interact, they both apply forces to one another that are equal in magnitude and opposite in direction. This third law of motion is also known as the law of action and reaction.
Using principles of third law of motion, we can make that the man pushing the lawn mower applies the same amount of force (in magnitude) as the lawn mower applies on him, thus the answer to the question is the third option i.e. the same.
Learn more about force here:
https://brainly.com/question/13191643
#SPJ4
A person standing at the edge of a cliff throws one ball straight up and another ball straight down, each at the same initial speed. Neglecting air resistance, which ball hits the ground below the cliff with the greater speed?
When a person standing at the edge of a cliff throws one ball straight up and another ball straight down, each at the same initial speed, neglecting air resistance, the ball that hits the ground below the cliff with the greater speed is the ball that was thrown straight up.
What is the acceleration due to gravity?The acceleration due to gravity is the acceleration that is produced in an object due to the gravitational force of the earth acting on the object.
The velocity of an object depends on the acceleration due to gravity and the height above the ground of an object as given below:
Velocity = √2gh
where;
g is the acceleration due to gravity
h is the height above the ground
Learn more about velocity and acceleration due to gravity at: https://brainly.com/question/25158970
#SPJ1
According to the Declaration of Independence, from where does government get its power?
from God
from a written constitution
from elected representatives
from the consent of the governed
The government derive its power according to the Declaration of Independence is the document that declare the freedom of the people. The document was approved by the Continental Congress on July 4, 1776.
Below are the main messages of the declaration of independence.
(1) God made all men equal and gave them the rights of life, liberty, and the pursuit of happiness.
(2) The main business of government is to protect these rights.
(3) If a government tries to withhold these rights, the people are free to revolt and to set up another government.
Learn more about declaration of independence here
https://brainly.com/question/9515546
#SPJ1
a technician needs to replace a failed power supply on a server. the server in question only has one power supply. the server contains two processors that need 100w, five hard drives that need 9w, and a gpu that uses 200w. which of the following power supplies should the technician use? A. 375w
B. 425w
C. 325w
D. 500w
The power supply that technician should use 500 W.
A power supply is a component that transforms the output of an ac power line into one or more constant dc outputs. A smooth voltage is created by filtering the ac voltage after it has first been rectified to create a pulsing dc. In spite of fluctuations in the ac line voltage or circuit loads, the voltage is finally regulated to produce a consistent output level.
The power use of the server as whole is,
100 W+ 5×9 W + 200 W
Power use=445 W.
So, the power should be more than the 445 W in order that there should not be any short circuit.
and from all the given options the power supply that is feasible is 500 W.
Learn more about power supply
brainly.com/question/28875612
#SPJ4
500 W of power should be used by the technician.
One or more consistent dc outputs are produced from an ac power line's output by a component known as a power supply. After rectifying the ac voltage to produce a pulse dc, a smooth voltage is produced by filtering the result. Despite changes in the ac line voltage or circuit loads, the voltage is eventually controlled to create a constant output level.
The entire server's energy consumption is,
100 W+ 5×9 W + 200 W
Using 445 W of power.
Therefore, the power must be more than 445 W to prevent short circuits.
Choose the power supply that is practical from the possibilities presented
Learn more about circuits here:
https://brainly.com/question/2969220
#SPJ4
If the mass of the box is 3.6 kg and it is accelerating with 4.2 m/s^2, What is the net force exerted on the box?
Explanation:
Force= mass × acceleration
= 3.6 × 4.2
= 15.12N
If the mass of the box is 3.6 kg and it is accelerating with 4.2 m/s², then the force exerted on the box is 15.12 N.
what is force?The definition of force is: The push or pull on a massed object changes its velocity. An external force is an agent that has the power to alter the resting or moving condition of a body. Every time two items interact, a force is exerted on each of the objects. The force is no longer felt by the two objects when the interaction ends. Only when there is interaction do forces actually exist.
The strong force, weak force, electromagnetic force, and gravitational force are the four fundamental forces operating in the universe. The formula of force is Force = mass × acceleration.
Hence, if the mass of the box is 3.6 kg and it is accelerating with 4.2 m/s², then the force exerted on the box is 15.12 N.
Learn more about force, here:
https://brainly.com/question/13191643
#SPJ2
after newton's proverbial apple fell from the tree, which hypothesis statement below would have been appropriate to test?
According to legend, young Isaac Newton came up with first law of gravity after getting hit on the head by a piece of fruit that had fallen from an apple tree while he was sitting underneath it.
What rules govern gravity?Newton's gravitational law states that every piece of matter in the universe is drawn to every other piece with a force than varies directly with the mass-to-mass ratio and inversely with the distance between them.
Which three gravitational laws are there?The product of the masses of two objects multiplied by two is the gravitational force between them. The gravitational pull here between objects will also triple if one of them triples in mass. When two objects' masses double, for example, the gravitational force between them is multiplied by two, and so on.
To know more about law of gravity visit:
https://brainly.com/question/29889712
#SPJ4
4. On Earth the average atmospheric pressure at the surface is 1013254 Pa. If we assume that the radius of Earth is 6.4 x 106m and the acceleration of gravity is 9.8 m/s2, what is the mass of Earth's atmosphere? Hint: You will need to use the equations for force, pressure, and the surface area of a sphere, but you will need to analyze the units to confirm how these get combined.) Use the following values to solve this problem. 16 pts 1 atm = PEarth=101325 Pa; REarth-6,4x10ºm; g = 9.8 m/s? Ending units:
At the surface of Earth, the ambient atmospheric pressure is 1013254 Pa. The weight of the atmosphere on Earth is 5.322 * 1016 kg.
Describe pressure.The magnitude of force applied to a certain region is referred to as pressure. So either a strong force or a strong force applied over a short area can cause a lot of pressure (or do both).
Why does air pressure exist?The atoms and molecules that comprise the many layers of the atmosphere are continually moving in arbitrary directions. Despite their modest size, when they hit a surface, they apply pressure that humans perceive as a force.
atmospheric pressure = 1013254 Pa
radius of Earth = 6.4 * 10⁶ m
gravity = 9.8 m/s²
surface area of a sphere = 4π radius²
surface area of earth = 4 * 3.14 * ( 6.4 *10⁶ )²
= 5.14719 * 10¹⁴ m²
mass of the atmosphere = ( 1013254 pa * 5.14719 * 10¹⁴ m²) / 9.8
= 5322 * 10 ¹⁶ gm
= 5.322 * 10¹⁶ kg
To know more about pressure visit:
https://brainly.com/question/912155
#SPJ4
Suppose that a ball is thrown vertically upward from earth with velocity v, and returns to its original height in a time t. If the value of g were reduced to g/6 (as on the moon), then t would:
If the value of g were reduced to g/6, then the equation for the time it takes for the ball to return to its original height would become t = 2v/(g/6), or t = 12v/g. Since the original equation is t = 2v/g, the new equation is 6 times greater, so the time t would be 6 times greater than before.
What would be the velocity of the ball when it returns to its original height? If the value of g were reduced to g/6, the ball would reach its original height with a velocity of 6v (where v is the initial velocity of the ball when it was thrown vertically up). The time t would also be reduced to t/6, since the acceleration of the ball is reduced to g/6. This means that the ball would take less time to reach its original height when compared to the time taken when the acceleration is equal to g. In conclusion, if the value of g were reduced to g/6, the velocity of the ball when it returns to its original height would be 6v and the time taken for the ball to reach its original height would be t/6.To learn more about velocity refer to:
https://brainly.com/question/80295?source=archive
#SPJ4
can electricity be conducted safely underwater and how?
Answer:
Yes
Explanation:
By adding salt.
When a 1.00-kg mass is suspended from a spring, the spring stretches by .050 m. What is the spring constant and what is the period if it oscillates in simple harmonic motion?
The period if it oscillates on simple harmonic motion is determined by the value to be 0.1256 seconds.
What does harmonic motion entail?Harmonic motion is the motion that an oscillating mass undergoes when the restoring force is proportionate to the displacement but acting in the opposite direction. A sine wave with a constant magnitude and frequency can be used to illustrate harmonic motion because it is periodic. A weight bouncing on a spring is an illustration of this.
Why do harmonics exist?Harmonics are the outcome of nonlinear loads converting AC voltage level to DC. Because of nonlinear electrically controlled components like computer power supply, energy-efficient lighting, and variable-frequency drives (VFDs), harmonics enter the electrical system.
According to the given information:The force constant of the spring,
So,
K = f/x
= (1 x 10)/0.2
= 50 N/m
Now, if the mass of 1 kg is suspended by the spring, then the period of oscillation,
T = 2π√(m/k)
T = 2π√(1/50)
T = 2π * 0.02
T = 0.1256s
the value to be 0.1256 seconds.
To know more about harmonic motion visit:
https://brainly.com/question/28208332
#SPJ4
The carbón dioxide is matter that is made up of
Through the decomposition of organic matter, CO₂ is released into the atmosphere as part of this natural process.
Is carbon dioxide a state of matter?One carbon atom is covalently doubly bound to two oxygen atoms in each of the molecules that make up carbon dioxide, which has the chemical formula CO 2.
At room temperature, it exists as a gas. In the atmosphere, carbon dioxide serves as a greenhouse gas because it absorbs infrared radiation despite being transparent to visible light. It has increased from pre-industrial levels of 280 ppm to a trace gas in the Earth's atmosphere at 421 parts per million (ppm), or roughly 0.04% by volume (as of May 2022).
The fundamental driver of both these elevated CO2 concentrations and climate change is the burning of fossil fuels. Groundwater, lakes, ice caps, and ocean all contain dissolved carbon dioxide.
To learn more about carbon dioxide refer to :
https://brainly.com/question/25385913
#SPJ1
Estimate the mass of air inside the passenger area of a CATA bus. A)100 kg B)10 kg C)1000 kg D)0.1 kg
The Correct option is D which is 0.1kg .
It can be challenging to calculate the air mass in a CATA bus's passenger compartment. It will most likely just weigh a few tenths of a kilogramme or perhaps less, which is exceedingly little.
This is because, in relation to the size of the bus itself, the volume of air inside the passenger compartment of a bus is rather low. Additionally, even a small volume of air will have a comparatively modest mass since the density of air at normal atmospheric pressure is extremely low.
The frequent interchange of air through open doors and windows would be another element that might contribute to the small mass of air inside a bus.This would mean that the air inside the bus is not stagnant and is constantly being replaced by the air outside which would lead to a decrease in mass. The answer would be D)0.1 kg
To learn more about the Mass:
https://brainly.com/question/13287011
https://brainly.com/question/13287011
#SPJ4
gravitational, magnetic, and electric forces can all be explained using fields. which of the following is a reason that we explain these forces using fields?
Fields provide a consistent framework for understanding and describing different types of forces, such as strength, direction, propagation, attenuation, and mathematically describing the behavior of forces.
What is gravitational force?Gravitational force is the force of attraction that exists between two objects that have mass. It is the weakest of the four fundamental forces in nature, but it is the most influential force when it comes to the large-scale structure of the universe. It is responsible for keeping planets and stars in orbit around one another, and also for the formation of galaxies and other large structures.
We explain these forces using fields because fields provide a consistent framework for understanding and describing different types of forces. Fields provide a way to represent the strength and direction of a force at any given point in space. They also provide a way to represent the interactions between different types of forces, such as how magnetic and electric fields interact to create electromagnetic forces. Furthermore, fields provide a way to represent how forces can propagate and attenuate over distances, allowing us to understand how things interact from afar. Finally, fields provide a way to mathematically describe the behavior of forces, allowing us to make predictions about how things interact in different situations.
To know more about magnetic field, visit
brainly.com/question/11514007
#SPJ4
The complete question is: What is a reason to explain the gravitational, magnetic, and electric forces using the fields?
when the car is in the position shown, what are the directions of the centripetal force acting on the car and the velocity of the car?
The directions of the centripetal force acting on the car and the velocity of the car is east. Thus, option d is correct.
What is velocity?Velocity is a measure of the rate and direction of an object's change in position. It is a vector quantity, having both magnitude and direction. Velocity is commonly described in terms of speed, distance traveled, and direction of travel. Velocity can be calculated by dividing the displacement (change in position) by the time taken for the displacement to take place. The SI unit for velocity is meters per second (m/s).
This force is generated by the car's acceleration inwards and is responsible for the car's circular motion. The velocity of the car is the speed of the car in the direction of the circle's circumference. The magnitude of the velocity is determined by the radius of the circle and the angular velocity of the car. The magnitude of the centripetal force is equal to the weight of the car times the square of the velocity divided by the radius of the circle.
To know more about velocity click-
brainly.com/question/24445340
#SPJ4
Complete question:
A car moves with a constant speed in a clockwise direction around a circular path of radius r, as represented in the diagram When the car is in the position shown, its acceleration is directed toward the?
a. north
b. south
c. west
d. east
You pull your t-shirt out of the washing machine and note that 1596 particles have become attached, each of which could be either an electron or a proton. Your t-shirt has a net charge of − 3.14 X 10 ^-17 C. How many electrons are attached to your t-shirt? What is the mass of the particles attached to your t-shirt?
(a) The number of electrons on the T-shirt is 700 electrons.
(b) The mass of the particle attached to your T-shirt is 1.5 x 10⁻²⁴ kg.
What is the number of electrons on the T-shirt?
The number of electrons on the T-shirt is calculated as follows;
Let the number of electrons = e
Let the number of protons = p
p + e = 1596 ------ (1)
p = 1596 - e ------ (2)
qp - qe = -3.14 x 10⁻¹⁷ ------- (3 )
The equation (3) can be simplified as;
q ( p - e ) = -3.14 x 10⁻¹⁷ -------- (4)
Now substitute the value of p into (4)
q (1596 - e - e) = -3.14 x 10⁻¹⁷
q (1596 - 2e) = -3.14 x 10⁻¹⁷
1596 - 2e = ( -3.14 x 10⁻¹⁷ ) / ( q )
1596 - 2e = ( -3.14 x 10⁻¹⁷ ) / ( 1.6 x 10⁻¹⁹ )
1596 - 2e = 196.25
2e = 1596 - 196.25
2e = 1399.75
e = 1399.75 / 2
e = 700 electrons
The mass of the particle attached to your T-shirt is calculated as follows;
m = (700 x me ) + ( 896 x mp)
m = ( 700 x 9.1 x 10⁻³¹ ) + ( 896 x 1.67 x 10⁻²⁷ )
m = 1.5 x 10⁻²⁴ kg
Learn more about number of electrons here: https://brainly.com/question/900457
#SPJ1
scallops use muscles to close their shells. opening the shell is another story--muscles can only pull, they can't push. instead of muscles, the shell is opened by a spring, a pad of a very elastic biological material called abductin. when the shell closes, the pad compresses; a restoring force then pushes the shell back open. the energy to open the shell comes from the elastic energy that was stored when the shell was closed. (figure 1) shows smoothed data for the restoring force of an abductin pad versus the compression. when the shell closes, the pad compresses by 0.15 mmmm.
Solve by multiplying one half by the drug's 10.5 newtons per millimetre and by its square root, 0.15 millimetre.
What is opening the shell?Another issue is that muscles can only pull, not push, while opening the shell. The shell is opened by a spring, a pad made of an extremely elastic organic substance termed abduction, rather than muscles. The pad contracts as the shell closes, and a restoring force pushes the shell open again.Yes, the had compresses by 0.15 millimetre at 12.5 newtons per millimetre. Mhm. Yeah. Therefore, this one-half informed by the spring constant modified by the squared of the spaceman is the formula for plastic potential energy. After that, we solve by multiplying one half by the drug's 10.5 newtons per millimetre and by its square root, 0.15 millimetre.
To learn more about muscles refer to:
https://brainly.com/question/13920046
#SPJ4
according to kinetic/collision energy, when are reactants more lielky to have sufficient energy to undergo a reaction
According to collision theory, the quantity of reactant molecule collisions determines how quickly a chemical reaction proceeds. The pace of reaction increases with the frequency of reactant-molecule collisions.
Under what situations will greater energy collisions between the reactants be more likely?The average pace of particles increases with temperature, which increases the rate of particle collisions. The average kinetic power of collisions increases with temperature, increasing the proportion of collisions that require the least amount of energy to react.
Which of the following conditions must be met for a reaction to occur when two reactant particles collide?Reactant particles need to have a certain minimum energy in order to make an efficient collision. The activation energy is the energy that starts the reaction.
To know more about energy visit :
https://brainly.com/question/1932868
#SPJ4
Use the given values of n and p to find the minimum usual value and the maximum usual value μ
−
2
σ
. Round your answer to the nearest hundredth unless otherwise noted.
n = 248, p = ?
Question options:
a) Minimum: 75.64; maximum: 48.36
b) Minimum: 52.36; maximum: 71.64
c) Minimum: 55.18; maximum: 68.82
d) Minimum: 48.36; maximum: 75.64
Minimum: 75.64; maximum: 48.36 is the nearest hundredth unless otherwise noted.
What is p?The given values of n and p to find the minimum usual value and the maximum usual value μ
−2σ
n = 248, p = Detailed explanation:
Considering the characteristics of the binomial distribution
n = 248, p = 4/5
To determine the necessary values, we must determine the mean and the standard deviation.
The steps are listed below.
Identify the mean.
μ = n·p = 248*(4/5) = 570.4
Find the variation in 2.
σ² = np(1 - p) = 248*(4/5)*(1 - 4/5) =
Discover the standard deviation in 3.
Minimum: 75.64; maximum: 48.36
Minimum: 75.64; maximum: 48.36 the nearest hundredth unless otherwise noted.
To learn more about usual value refer to:
https://brainly.com/question/27806465
#SPJ4
A block of mass 3.60 kg is placed against a horizontal spring of constant k = 795 N/m and pushed so the spring compresses by 0.0450 m. (a) What is the elastic potential energy of the block-spring system (in J)? (b) If the block is now released and the surface is frictionless, calculate the block's speed (in m/s) after leaving the spring
The initial elastic potential energy of the block-spring system is 17.88 joules. The final speed of the block is approximately 3.15 meters per second.
What is elastic potential energy?Elastic potential energy is energy stored in an object as a result of application of a force to deform an elastic object. The energy is stored until the force is removed and the object springs back to its original shape and size, doing work in the process.
By applying Hooke's law and definition of work, we define the elastic potential energy (Ug), measured in joules, by the following formula:
Ug = 1/2 × k × x²
where, k = Spring constant, measured in newtons per meter
x = Deformation of the spring, measured in meters
If we know that k = 795 N/m and x = 0.045m, then the elastic potential energy is:
Ug = 1/2 × 795 × 0.045
Ug = 17.88 Joules
The initial elastic potential energy of the block-spring system is 17.88 joules.
b) According to the Principle of Energy Conservation, the initial elastic potential energy of the block-spring system becomes into translational kinetic energy, that is:
Ug = 1/2 × m × v²
where, m = Mass measured in kilograms,
v = Final speed, measured in meters per second.
Then, the final speed is cleared:
v = [tex]\sqrt{2Ug/m}[/tex]
If we know that Ug = 17.88 Joules and m = 3.60kg, then the final speed of the block is:
v = √(2 × 17.88J)/ 3.60kg
v = 3.15m/s.
The final speed of the block is approximately 3.15 meters per second.
Learn more about Potential energy here:
https://brainly.com/question/24284560
#SPJ1
Imagine, if you can, that you are traveling toward a black hole. When is time dilation likely to occur?
when you approach the event horizon
when you cross the wormhole
when you land in the singularity
when you pass the quasar
Imagine, if you are traveling toward a black hole. The time that time dilation is likely to occur is option A: when you approach the event horizon.
What is the black hole about?The event horizon is the boundary around a black hole beyond which nothing, including light, can escape. As an object approaches the event horizon, the gravitational pull becomes stronger. This causes time to slow down for the object, a phenomenon known as time dilation.
The effect becomes more pronounced as the object gets closer to the singularity, the central point of the black hole where the gravitational pull becomes infinitely strong.
Crossing a wormhole, which is a hypothetical passage through space-time connecting distant points, would also experience time dilation, but it is different than the one that occurs near a black hole.
Learn more about black hole from
https://brainly.com/question/468699
#SPJ1
a stone is dropped from the roof of a house. a person standing on the ground watches and times te fall of the stone with a stopwatch. if the stone takes 1.1 seconds to fall, how tall is the house using feet as your measurement
The height of the house in feet would be 19.45.
The distance in metres can be converted to feet by multiplying by 3.281 (1 m = 3.281 ft).
So the height of the house in feet =distance (in meters) × 3.281
Height of the house=1/2× 9.8×1.1²
=5.929 m
Height of the house in feet= 5.929×3.281= 19.45 feet
Please note that the result of this calculation is an approximation, and real-world factors such as air resistance may affect the actual time it takes for the stone to fall.
Acceleration due to gravity is 9.8 m/s² and time for the stone to fall is 1.1 seconds, can be used to calculate the height of the house. Calculating the distance fallen in metres, then multiplying it by 3.281 to get the distance in feet. The exact amount of time it takes for the stone to fall may vary due to external factors like air resistance.
Learn more about gravity:
https://brainly.com/question/14874038
#SPJ4
A 2,400-kilogram car is traveling at a speed of 20. meters per second. Compared to the magnitude of the force required to stop the car in 12 seconds, the magnitude of the force required to stop the car in 6.0 seconds is (1) half as great(2) twice as great (3) the same (4) four times as great
Compared to the magnitude of force required to stop the car in 12 seconds, magnitude of the force required to stop the car in 6.0 seconds is : (3) the same.
What is meant by force?In physics, force is an influence that changes the motion of an object.
Force is : F = m * a, where m is mass of the object and a is acceleration.
Given, distance traveled is zero (the car stops), the initial velocity is 20 m/s and time is 12 seconds.
As, d = vt + (1/2)at^2
So, a = 2d/t^2 - v^2/d
a = 2*0/(12^2) - (20^2)/0 = 0 - 400/0 = undefined
a = 2*0/(6^2) - (20^2)/0 = 0 - 400/0 = undefined
As acceleration is undefined in both case, we say that the force required to stop the car in 6.0 seconds is same as force required to stop the car in 12 seconds.
So, answer is (3) the same.
To know more about force, refer
https://brainly.com/question/12785175
#SPJ4
a box slides down a frictionless ramp. it begins at rest. the ramp has an incline of 40.0 degrees, find how long it takes to reach 1.00m/s.'
A box slides down a frictionless ramp, then it takes approximately 0.87 seconds for the box to reach 1.00 m/s.
What is meant by friction?The force resisting relative motion of solid surfaces, fluid layers, and material elements sliding against each other is called friction.
As, v^2 = u^2 + 2as
Given, v = final velocity = 1.00 m/s ; u = initial velocity = 0 m/s (since the box is at rest) ; a = acceleration due to gravity = 9.8 m/s^2 and s = distance covered = 1.00 m
So, s = 1.00 m = x x sin(40.0 degrees)
x = 1.00 m / sin(40.0 degrees)
(1.00 m/s)^2 = 0^2 + 2(9.8 m/s^2) (1.00 m / sin(40.0 degrees))
t = √((1.00 m/s)^2 - 2(9.8 m/s^2) (1.00 m / sin(40.0 degrees)) )/ (2(9.8 m/s^2))
Hence, t ≈ 0.87 sec
It takes approximately 0.87 seconds for the box to reach 1.00 m/s.
To know more about friction, refer
https://brainly.com/question/24338873
#SPJ4
In the absence of air friction, an object dropped near the surface of the Earth experiences a constant acceleration
of about 9.8 m/s2
(A) speed of the object increases 9.8 m/s during each second
(B) speed of the object as it falls is 9.8 m/s
. This means that the
(C) object falls 9.8 meters during each second
(D) object falls 9.8 meters during the first second only
(E) rate of change of the displacement with respect to time for the object
In the absence of air friction, an object dropped near the surface of the Earth experiences a constant acceleration of about 9.8 m/s2, so the speed of the object increases 9.8 m/s during each second.
The speed of the object increases 9.8 m/s during each second the acceleration means the change in velocity per second.
Gravity can be explained as a force such that controls the movement of the planets such as Earth around the Sun, hold stars grouped in galaxies together, and galaxies grouped in clusters.
The gravity which is generally near the Earth's surface makes it possible for all physical objects to possess weight and experience a free fall.
Generally, the acceleration due to gravity for an object experiencing a free fall near the Earth's surface is 9.8 m/s2.
Learn more about Acceleration:
brainly.com/question/12550364
#SPJ4
PLEASE HELP AND HURRY! VERY IMPORTANT TEST
1. What physical properties can cause an object to resonate?
-mass, color, and density
-shape, temperature, energy
-shape, composition, and length
-color, density, and composition
2. Which statement about resonance is correct?
-Resonance causes the amplitude of vibrations to decrease.
-Resonance causes the amplitude of vibrations to increase.
-Resonance does not affect the amplitude of vibrations.
-Resonance causes frequency to incease
3.How can you make the natural frequency of a string increase?
-decrease the tension of the string
-cut the string
-tighten the string
-loosen the string
4. A student wants to make the natural frequency of a tube increase. How can the student accomplish this?
-Decrease the length of the tube
-Change the composition of the tube
-Make holes in the tube
-Increase the length of the tube
5.Which factor determines the natural frequency of an object?
-color
-elasticity
-length
-pressure
Question:1. What physical properties can cause an object to resonate?-mass, color, and density-shape, temperature, energy-shape, composition, and length-color, density, and composition
2. Which statement about resonance is correct?-Resonance causes the amplitude of vibrations to decrease.-Resonance causes the amplitude of vibrations to increase.-Resonance does not affect the amplitude of vibrations.-Resonance causes frequency to incease3.How can you make the natural frequency of a string increase?-decrease the tension of the string-cut the string-tighten the string-loosen the string4. A student wants to make the natural frequency of a tube increase. How can the student accomplish this?-Decrease the length of the tube-Change the composition of the tube-Make holes in the tube-Increase the length of the tube5.Which factor determines the natural frequency of an object?-color-elasticity-length-pressure
Explanation:
answer is 1,2,3,4,5,
Consider the periodic waveform of Fig. 1 r(t) T DT DT 2 Figure 1: Waveform for Problem 1 Derive expressions for the DC component of this waveform, and for the magnitudes of the Fourier series harmonics. Determine the value of D which sets the magnitude of the Fourier series 3d harmonic to zero. Finally, derive an expression for the RMS value of this waveform
A wave-shaped signal is represented graphically by a waveform. Depending on the kind of wave generating input, it might be either square or sinusoidal. The characteristics that determine the wave's size and shape determine the waveform.
The required details for waveform in given paragraph
The waveform in Figure 1 is a square wave with a period T. The DC component of this waveform is the average value of the waveform over one period. It can be found by integrating the waveform over one period and dividing by the period T:
DC component = from 0 to T
The magnitude of the Fourier series harmonics can be found by using the formula for the Fourier series coefficients:
Ak = (from 0 to T)
Bk = (from 0 to T)
where k is the harmonic number, f is the fundamental frequency (1/T), and A and B are the Fourier series coefficients.
For a square wave, the odd harmonics are non-zero and the even harmonics are zero. For the 3rd harmonic, the magnitude is:
Ak = (from 0 to T)
= (from 0 to T)
= (from 0 to T)
To set the magnitude of the Fourier series 3rd harmonic to zero,
D = 0
Finally, the RMS value of the waveform can be found by using the formula:
RMS = (from 0 to T)
= (from 0 to T)
= It's important to notice that the solution and expressions given here are only valid for square waveform with a period T and amplitude D.
To know more about RMS visit:
https://brainly.com/question/12896215
#SPJ4
Select the techniques that can be used to speed up refrigerant recovery (you may select more than one)
a. Cool the recovery cylinder
b. Recovery from both sides of the system at once
c. Use large-diameter hoses
d. Heat the refrigerant system
Amongst the refrigerant techniques given in the options, all of them are correct and can be used to speed up recovery.
A brief explanation of all the refrigerant techniques to increase the speed of recovery:
a. Cooling the recovery cylinder: This technique involves placing the recovery cylinder in a cool environment, such as a cooler or refrigerator, before beginning the recovery process. This can help to speed up the process by reducing the temperature of the refrigerant inside the cylinder, making it more dense and easier to pump out.
b. Recovery from both sides of the system at once: This technique involves connecting the recovery equipment to both the high and low side of the refrigerant system at the same time. This allows for faster recovery by allowing the refrigerant to flow in both directions simultaneously.
c. Use large-diameter hoses: Using larger diameter hoses can also help to speed up the recovery process. This is because larger hoses provide less resistance to the flow of refrigerant, allowing it to be pumped out more quickly.
d. Heating the refrigerant system: This technique involves heating the refrigerant system before beginning the recovery process. This can help to speed up the process by increasing the pressure of the refrigerant, making it easier to pump out.
All these techniques can help to speed up the refrigerant recovery process by making it easier to pump out the refrigerant, and by allowing for faster flow of the refrigerant. However, safety measures should be taken before applying these techniques, and precautions should be taken to avoid over-heating or over-cooling the system, as this can cause damage to the equipment.
Learn more about refrigerant techniques:
https://brainly.com/question/12950669
#SPJ4
An amusement park ride consists of a rotating circular platform 10.1 m in diameter from which 10 kg seats are suspended at the end of 3.6 m massless chains. When the system ro-tates, the chains make an angle of 15.9° with the vertical.
The acceleration of gravity is 9.8 m/s?
Your re
What is the speed of each seat?
Answer in units of m/s.
The speed of each seat is 3.2 m/s.
What is the speed of each seat?
The speed of each seat is calculated by applying Newton's second law of motion as shown below.
T cos (θ) = mg
T sin (θ) = mv² / r
where;
v is the speed of each seatT is the tension in the ropem is the mass of each seatg is acceleration due to gravityT = mg / cos(θ)
T = ( 10 x 9.8 ) / ( cos 15.9 )
T = 101.9 N
The speed of each seat is calculated as;
v² = (Tr sin(θ) ) / m
v = √ [ (Tr sin(θ) ) / m ]
v = √ [ (101.9 x 3.6 x sin(15.9) ) / 10 ]
v = 3.2 m/s
Learn more about speed here: https://brainly.com/question/30251138
#SPJ1
a solid object of mass m is suspended vertically from a spring balance. the spring balance reads w when the object is in air. when the object is submerged in water while still attached to the balance, the reading on the balance is
The Archimedes principle states that when an object is submerged in a fluid, it seems to lose weight that is equal to the weight of the fluid that was displaced.
What transpires when something is immersed in water? The Archimedes principle states that when an object is submerged in a fluid, it seems to lose weight that is equal to the weight of the fluid that was displaced.The apparent weight loss is brought about by the buoyant force, which acts in an upward direction counter to the object's weight.The buoyant force is the name for the upward push that fluid-immersed objects experience.The buoyant force.A submerged item experiences fluid pressure on all sides.The upward force on the bottom surface (F2) is larger than the downward push on the top surface, though, because pressure rises with depth (P) (F1).As a result, there is constantly an upward pull from buoyancy. 'To learn more about Archimedes principle refer
https://brainly.com/question/775316
#SPJ4
two stationary point charges of unknown magnitude and sign are isolated from all other charges. if the electric field strength is zero at the midpoint of the line joining them, which of the following can be concluded about the charges?
Two stationary point charges of unknown magnitude and sign are isolated from other charges. If electric field strength is zero at midpoint of line joining them, following can be concluded about charges : They are equal in magnitude but opposite in sign.
What is meant by electric field?The electric field is a vector field that describes the force experienced by a test charge placed in the field. The direction of the electric field is given by the direction of the force experienced by the test charge and its magnitude is given by the force experienced per unit charge.
Electric field at the point due to point charge ;
E = k * (q/r^2) * r_unit
where k is Coulomb's constant, q is the charge, r is the distance from the point charge, and r_unit is the unit vector pointing from the point charge to the point where the electric field is being calculated.
To know more about electric field, refer
https://brainly.com/question/14372859
#SPJ4
Note: The question given on the portal is incomplete. Here is the complete question.
Question: Two stationary point charges of unknown magnitude and sign are isolated from all other charges. if the electric field strength is zero at the midpoint of the line joining them, which of the following can be concluded about the charges?
They are equal in magnitude but opposite in sign.
They are equal in magnitude and sign.
They are not equal in magnitude and opposite in sign
They are not equal in magnitude but same sign.
What is the ideal speed to take a 75 m radius curve banked at a 10.0° angle?
m/s
The ideal speed to take a 75 m radius curve banked at a 10.0° angle is 21.82 m/s.
The formula for the maximum vehicle velocity on banked roads can be used to determine the banking angle. The equation for the angle of banking, t a n = v 2/ r g, is obtained by squaring the equation on both sides and rearrangement.
The curved path's banking angle is given as
tan θ = v² / rg
Here, v is the linear speed, r is the curved path's radius, is the bank angle, and g is the acceleration brought on by gravity.
θ = 10.0°, r = 75 m, and g = 9.8 m/s2 are our values.
By replacing these numbers in the formula above, we obtain
tan 10 = v2 / 75m × 9.8m/m/s²
v² = 476.54
v = √476.54 = 21.82 m/s
Thus, 21.82 m/s is the optimal speed.
To learn more about angle of banking from given link
https://brainly.com/question/13257080
#SPJ1
