Astronauts still weigh 65 kg. Mass is constant or does not change anywhere.
A person's mass is constant whether he is on Earth or on the Moon because mass is an essential property of matter. There is no difference in the mass of astronauts on Earth and on the moon. Mass is a constant value, but a person's weight varies depending on their position on the earth.
Weight is the downward force exerted on a person or body by gravity. Whether measured on Earth or on the ISS, the mass does not change. Weight may change due to gravitational forces such as B. On the moon, the weight is reduced to one-sixth of what it is on Earth. Astronauts and their spacecraft still have mass and are subject to Earth's gravity.
Learn more about The acceleration here:- https://brainly.com/question/460763
#SPJ4
A filament bulb, rated at 40W, converts 10% of its electrical energy supply to light energy. Calculate the quantity of light energy emitted in five minutes
The quantity of light energy emitted at 40W, in five minutes or 300 seconds will be 1200J.
Equation:
40 W total power
40 W = 40 J/s (joules per second)
10% efficiency
Efficiency x Power Equals Actual Power output
40x0.1 = 4W
Power x Time Equals Energy
300 s x 4 W = 1200 J
Energy of Light = 1200 J
Things like stars, lightbulbs, lasers, and hot objects all emit light energy. Light energy travels from stars like our Sun to the Earth. A natural source of light energy is the Sun.
The electromagnetic spectrum is much larger than the light we can see, which is made up of each hue in the rainbow. Other forms of light include those that are invisible to the human sight, such as radio waves, microwaves, infrared radiation, ultraviolet rays, X-rays, and gamma rays.
To know more about energy, visit:
https://brainly.com/question/1932868
#SPJ1
Explain what type of conformity the subjects in muzafer sherif's moving light experiment were most likely experiencing, using evidence from the text to justify your answer.
The conformity most likely experienced by subjects in Muzaffar Sheriff's Moving Light experiment was internalization.
Internalization is defined as a group of people sharing similar thoughts and behaviors purely with little or no influence from one part on the other, without falsifying their behavior just to collect The type of affinities to adopt. This type of affinity is seen in those who participated in Muzaffar Sherif's Moving Light Trial.
Conformity means that people make their beliefs attitudes behaviors or perceptions more conformable to those of the group to which they belong aspire to belong or to which they desire approval. It is the process of changing to Conformity has important social implications and continues to be actively investigated.
Learn more about Muzaffar Sheriff's here:-https://brainly.com/question/22075408
#SPJ4
you are analyzing a video of a moving object and want to calculate its average velocity. the video has a frame rate of 15 fps. as you are analyzing the video frame by frame, you see that the object moves a distance of 39 cm in 9 frames. what is the average velocity of the object in m/s?
Let Distance moved by objects x = 45cm.
Velocity can be easily calculated by multiplying the centroid distance between the previous frame and the current frame by the frame rate of the video and scaling the units to meters pixels. Average velocity is defined as the change in position or displacement divided by the time interval over which the displacement occurs.
Average velocity can be positive or negative depending on the sign of the shift. From a particle's velocity versus time graph, its average velocity can be found by calculating the total area under the graph and dividing it by the appropriate time interval. For particles with uniform acceleration, the velocity-time graph is a straight line. Calculate acceleration by dividing the change in velocity by the change in time.
Learn more about Average velocity here:-https://brainly.com/question/24739297
#SPJ4
you are given a solenoid of length 0.6 m and radius 0.08 m. it has 4000 turns of wire with resistance of 0.10 ohms. you wish to generate a magnetic field of 0.15 t. the current to which your power supply should be set is closest to:
Alternating current is also known as mains power, domestic power supply, domestic power supply, mains power supply, or wall power supply, as it is the voltage supplied by the outlet.
The rate of change of direction is typically 50 to 60 times per second and is called hertz (Hz). There are three main types of power supplies.
Uncoordinated (also known as brute force), Linear Coordinated, and Switching. A fourth type of power circuit, called ripple regulation, is a hybrid of "brute force" and "switching" designs and deserves its own subsection. One way to tell if you're using an AC-DC adapter or a DC-DC model is to check the device itself. Input and output information is often displayed somewhere in the interface. If the input is AC, it is an AC-DC power supply; if both input and output are DC, it is a DC-DC model.
Learn more about power here-
https://brainly.com/question/11800127
#SPJ4
Jacob and David devise an experiment to determine how tall the school building is. They stand on the roof of the school where Jacob drops a rock to the ground while David times it. From the time Jacob drops the rock to the time they hear it hit the ground, it takes 0.81 s. If the speed of sound is 340 m/s how tall is the school? Remember that it takes time for the rock to fall to the ground AND time for the sound of it to come back up for them to hear it.
Answer:
The school is 3.40 meters tall.
Explanation:
You need to equations to solve this question. You need to know the time it takes to reach the ground and the time it takes for the two observers to hear it. The distance in both cases is the same, so the two conditions can be equated to each other.
Equations.
d = the height of the buildings
a is the acceleration due to gravity and is a constant 9.8i1 m/s^2
t1 is the time it takes to hit the ground
The initial velocity = 0 because the rock was dropped
Equation One
d = vi*t + 1/2 a t^2
Equation Two
d = v * t2
v is the velocity of sound
t2 is the time it takes for the sound to come back from hitting the ground.
d is the height of the school
Solution
vi*t + 1/2 a t1 ^2 = v * t2
t2 = 0.81 - t1
The times are separate, but they add up to 0.81 so
t1 I+ t2 = 0.81
t2 = 0.81 - t1
Rewrite the equation putting in the givens. Remember vi = 0
1/2 9.81 t1^2 = 340 * (0.81 - t1) Remove the brackets
4.91* t1^2 = 275.4 - 340 t1 Transfer the right side to the left
4.91*t1^2 + 340t1 - 275.4 = 0 Use the quadratic formula to solve
a = 4.91
b = 240
c = -275.4
t1 = (-240 +/- sqrt(240^2 - 4*4.91*-275.4))/(2*4.91)
t1 = .8007 = 0.80
t1 + t2 = 0.81
0.80 + t2 = 0.81 - 0.80
t2 = 0.01
What you have found is the time it takes for the sound to come back to the two observers which is 0.01 seconds
d(height of school) = 340 * 0.01 = 3.4 meters
The random variable x is known to be uniformly distributed between 70 and 100. The probability of x having a value between 80 to 95 is.
The probability density function (pdf) for the uniform distribution has the basic formula: f(x) = 1/ (B-A) for A x B.
A continuous probability distribution, the uniform distribution is concerned with equally likely outcomes. It is referred to as having a rectangular distribution on the interval [a,b] or having a uniform distribution for the continuous random variable X. Above is a representation of the probability density function of a continuous uniform distribution. The probability of drawing a heart, club, diamond, or spade is equally likely; hence, the area under the curve is 1, which makes sense given that the total of all probabilities in a probability distribution is 1.
Learn more about uniform here-
https://brainly.com/question/28841819
#SPJ4
what type of x-ray machine includes pieces of high-resolution fixed x-ray equipment that allow physicians to diagnose and perform surgery in a minimally invasive manner?
Standard computed tomography X-rays are a type of x-ray machine that includes pieces of high-resolution fixed x-ray equipment that allow physicians to diagnose and perform surgery in a minimally invasive manner.
X-ray imaging equipment includes X-ray machines. Since many years ago, X-rays, a type of electromagnetic radiation, have been employed in the medical industry. With the help of this technology, we have been able to see images of our internal organs, including the heart, lungs, and even bones. Electromagnetic radiation such as X-rays can reflect off a variety of materials. Some substances have a high density, whilst others have a low density.
Standard computed tomography X-ray machines are employed for airport security as well as in the medical industry.
These X-rays can image a variety of body areas, including bones, skin, lungs, and the heart, due to their strong X-ray radiation power. Additionally, CT scans are frequently used in X-rays to image organs like the brain that are invisible to traditional X-rays.
Learn more about X- rays here:
https://brainly.com/question/2833441
#SPJ4
f the acceleration voltage in a television tube is 13.2 kv , what are the shortest-wavelength x rays produced by the television?
1.016 nm is the shortest-wavelength x rays produced by the television
E = hc/λ
13200×1.6×10-19 = 6.62×10-34 ×3×108 /λ
2.11×10^-17=2.144×10^-31/λ
λ = 1.016 nm
Since the relationship between wave frequency and wavelength is inverse, gamma rays have extremely tiny wavelengths that are only a small portion of the size of atoms, whereas other wavelengths can extend as far as the universe. No of the medium they are passing through, electromagnetic radiation's wavelengths are typically expressed in terms of the vacuum wavelength, but this isn't always stated explicitly.
The wavelength of electromagnetic radiation affects how it behaves. Speed of light = wavelength x frequency Energy = Planck's constant x frequency Wave number = 1/wavelength in cm. The wavelengths of different parts of the electromagnetic spectrum are displayed together with a rough approximation of the wavelength size.
To know more about wavelength visit : https://brainly.com/question/14530620
#SPJ4
If the current in a a wire is 2. 0 amperes and the voltage across the wire is 10 volts, what is the resistance of the wire?.
The resistance of the wire will be 5 ohm.
Resistance is nothing but the opposing force applied during charges moving from one side of the wire to the another side of the wire.
According to the ohm's law we have
V ∝ I
or we can write
V = IR
where, V is the voltage applied and I is the current applied and the R is the resistance of the wire.
so we can write,
R = V/I
R = 10/2
R = 5 Ohm
Hence the resistance of the wire will be 5 ohm.
To know more about the resistance, visit here
https://brainly.com/question/11431009
#SPJ4
the cessna cardinal, a single-engine light plane, has a wing area of 16.2 m2 and an aspect ratio of 7.31. assume the span efficiency factor is 0.62. if the airplane is flying at standard sea-level conditions with a velocity of 300 km/h, what is the induced drag when the total weight is 9800 n?
The induced drag coefficient of the plane is 0.0067
What is induced drag?In aerodynamics, drag caused by lift, induced drag, vortex drag, or drag due to lift is the aerodynamic drag that occurs when a moving object redirects the airflow coming over it.
Given,
Weight (w) = 9800 N
Wing area (A) = 16.2 m²
Span efficiency factor (E) = 0.62
Zero-lift drag coefficient (CD0) = 0.03
Velocity (v) = 725 km/h = 300 km/h or 83.34 m/s
Density of air (p) = 1.225 kg/m³
Aspect ratio (AR) = 7.31
W = ¹/₂ pv²×A×Cl
Cl = lift coefficient
Cl = 2w/pARv²
Cl = 2×9800/1.225×7.31×83.34²
Cl = 0.31
Coefficient of induced drag (Cdi) = Cl²/π×E×AR
Cdi = 0.31²/3.14×0.62×7.31
Cdi = 0.0067
To know more about induced drag visit:
https://brainly.com/question/10121475
#SPJ4
Clocks on a spaceship moving at high speed relative to the earth run more slowly when viewed from.
According to relativity, the clocks on the spaceship move more slowly when viewed from the spaceship.
What is relativity?Relativity is the measure of relative motion of objects.
How to decide which clock runs more slowly?According to Einstein's theory of relativity in 1905 its postulates state that
The speed of light is constantObjects moving near the speed of light measure a shorter length called length contractionObjects moving near the speed of light measure a shorter time called time dilationNow, since Clocks on a spaceship moving at high speed relative to the earth. Since the clock on the spaceship is moving, using the third postulate, we see that the clock on the spaceship runs more slowly when viewed from the spaceships moving frame, since it is moving relative to the earth.
So, we can see that the clocks on the spaceship move more slowly when viewed from the spaceship.
Learn more about relativity here:
https://brainly.com/question/29453152
#SPJ1
a car is moving with a constant speed of 20 meters per second. what total distance does the car travel in 2.0 minutes?
Answer:
2400 m
Explanation:
Dimensions in units need to match so
2 min = 120 sec
then rate X time = distance
20 m/s X 120 s = 2400 m
Answer:
Explanation:
it is 43km
Please help I’ll give points crown and thanks very argent Thank you
Answer:
See below
Explanation:
1A 2D 3B 4C
A sine wave is offset 1/6 cycle with respect to time 0. What is its phase in degree and radians?.
The phase in degree and radians is 2π/6 radian.
Solution:
1/6 cycle
1/6 cycle = 1/6 × 2π = 2π/9 radian
Phase angles are measured in radians. A radian is an angle whose arc length equals its radius. One rotation is equivalent to 2π radians or 360 degrees. In electronic signals, phase is the position of the wave at a particular point in time in the waveform cycle. It measures exactly where the wave is within its cycle.
Phase is the position of the instant in the cycle of the waveform. Phase is a dimensionless quantity. A complete cycle is called a phase. Phase is also expressed in radians. Phase is a measure of the relative time difference between two sine waves. Phase is actually a time difference but is most often measured in degrees or radians.
Learn more about A sine wave here:-https://brainly.com/question/28160174
#SPJ4
What net force is necessary to accelerate a 300 kg object at 3m.s^-2?
Answer:
900 N
Explanation:
Simple to remember formula:
F = m * a
= 300 * 3 = 900 N
A line that intersects two or more lines in a plane at different points is called a?.
Answer:
transversal
Explanation:
or transverse line
To get school school a girl walks 1km north in 15 minutes she then walks 200 meter south west in 160 seconds what is the girl's average velocity for her walk to school ?
Answer:
v=1.132m/s
Explanation:
velocity=total distance/ total time
first convert 1km to m so that would be 1000m then add the total distance so 200+1000=1200. 1200 is the total distance. now add the total time so we need to convert 15 min to sec which is 900 sec. 160 +900=1060. now divide total distance by total time.
v=?
d=1200m
t=1060s
v=d/t
v=1200m/1060s
v=1.132m/s
Paint spills onto a floor in a circular pattern. The radius of the spill increases at a constant rate of 2. 5 inches per minute. How fast is the area of the spill increasing when the radius of the spill is 18 inches?.
The correct answer is 90pi in ^2/min.
Area of the spill
Area of the spill=S=πr²
dS/dr=(πr²)=2πr
Radius change with speed=dr/dt =2.5(m/s)
Area of the spill will increase with speed
dS/dt = dS/dr × dr/dt =2πr ×dr/dt
=2π×18×2.5
=282.74
Therefore the area in which the paint spilled is increasing with speed. The rate at which the area of spill is increasing is 90pi in²/min.
Learn more about area of the spill refer: :ttps://brainly.com/question/3818648
#SPJ4
Suppose a pv farm requires 2,000 panels to generate power at 40% efficiency. If a new panel were invented that was 50% efficient, how many panels would be required?.
The number of panels required when the efficiency of the machine changes to 50% is 1,600 panels.
What is the efficiency of a machine?The efficiency of a machine or any device is the measure of the ratio of the output energy or output work of the machine or device to the input work or energy of the device.
The efficiency of the PV farm describes how well it converts solar energy from the sun into useful energy.
The smaller the number of panels required by the PV farm, the more efficient the PV farm is and vice versa.
The number of panels required when the efficiency of the machine changes is calculated as follows;
40% ------> 2,000 panels
50% --------> ?
= (40 x 2000) / 50
= 1,600 panels
Learn more about efficiency here: https://brainly.com/question/15418098
#SPJ1
What is the total number of subatomic particles found in the nucleus of an atom of argon?.
The subatomic particles in the nucleus of an atom of argon depend on the nucleus and proton.
What subatomic particles?
A particle that is smaller than an atom is what is known as a subatomic particle. Protons, electrons, and neutrons are the three subatomic particles that make up an atom in most cases.
40Ar
18 protons, 22 neutrons, 18 electrons
There are 18 protons from the argon element. These 18 electrons because it is neutral, and 22 neutrons because 40 - 18 = 22.
Hence the total number of subatomic particles present in the nucleus is 22.
To learn about the subatomic particles the link is given below:
https://brainly.com/question/7495131?referrer=searchResults
#SPJ4
Please help with one of these questions or both I need it asap it’s argent
Answer: A
Explanation:
loss and degradation of habitat (mainly deforestation), over exploitation (hunting, overfishing), invasive species, climate change, and nitrogen pollution.
Two carts, a and b, are connected by a rope 39 ft long that passes over a pulley p. Two carts on a horizontal surface are connected by a rope that passes over a pulley. The distance between the pulley p and the point q on the horizontal surface is 12 ft. Cart a is to the left of point q, and cart b is to the right of point q. Both carts are traveling from right to left. The point q is on the floor 12 ft directly beneath p and between the carts. Cart a is being pulled away from q at a speed of 4 ft/s. How fast (in ft/s) is cart b moving toward q at the instant when cart a is 5 ft from q? (round your answer to two decimal places. ).
The velocity of cart B is 1.73 ft/sec moving towards Q at instant when cart A is 5 ft away from Q .
We have given in question that,
length of rope (l) = 39 ft
the distance between pully point P and horizontal point Q = 12 ft
velocity of cart A = 4 ft/sec
let a = position of cart A relative to Q =0
b = position of cart B relative to Q =0
we want to find out value of db/dt when a = 5 ft .
da/dt = velocity of cart A = 4 ft/sec
Now, consider right angle triangle PQB,
(PB)² = 12² + b² ---(1)
(PA)² = 12² + a² (right angle triangle PQA)
39 = (PA)² + P² = √144+b² + √ 144+a²
so, 39 = √144+b² + √144+ a² ---(2)
differenating equation (2) with respect to time t
we get,0 = b/√144+b² × db/dt + a/√144+a² ×da/dt -----(3)
from equation (2) put a = 5 (given)
39 = √144+b² + √144+25 = 13 + √144+b²
144 + b² = (39-13)² = 676 => b² = 532
=> b = +√532 , b= -√532 but b is on negative side of Q= 0 so, b = -√532
Now, putting value of b, a, da/dt in equation (3)
0 = (-√532 /√144+532 )× db/dt + (5√144+25 )× 4
=> 0 = (-√532/26) × db/dt + 20/13
=> db/dt = ( 20/13 )(26/√532) = 40/√532
= 1.73 ft/sec
Hence , the velocity of cart B moving towards Q is 1.73 ft/sec when cart A is 5 ft away from point Q.
To learn more about Cart problem, refer:
https://brainly.com/question/13304643
#SPJ4
Where is the sun located on Earth’s elliptical orbit?(1 point)
at a focus?
at the perihelium
at the aphelium
at the center of the two foci
Answer:
(C)
Explanation:
i took the test and please make me the brainlest
If Jenny has a mass of 45 kg, and is on Earth. What is Jenny's weight?
Answer:
441kg
Explanation:
Lets assume Jenny is on Earth, if she is on the Earth, we time 45kg by 9.8
which means her weight on Earth would be 441kg.
Answer:
441 N is Jenny's weight
Explanation:
Given:
m = 45 kg
g = 9.8 m/s²
___________
P - ?
P = m·g
P = 45·9.8 = 441 N
According to the rutherford model, which force keeps electrons in orbit around the nucleus?.
The correct answer is centripetal force keeps electrons in orbit around the nucleus.
What is Rutherford model?
Rutherford Atomic Model - J. J. Thomson's "plum pudding" model was unable to account for some experimental findings related to the atomic structure of elements. British scientist Ernest Rutherford carried out an experiment, and using the results of this experiment, he proposed Rutherford's Atomic Model and explained the atomic structure of the elements.
Thus, in the Rutherford model, the centripetal force that maintains the electron in orbit is produced by the electrostatic attraction between the (positive) nucleus and the (negative) electron.
To learn more about Rutherford model from the given link
https://brainly.com/question/21373854
#SPJ4
The sun is almost 22 million times as massive as the moon but it is nearly 400 times as far from earth. Which celestial body, the sun or the moon, exerts the greatest amount of gravitational force on you as you sit in class?.
Answer:
Explanation:
Stronger to the Sun 138 times
F = G·M·m / D²
22 000 000 / 400² ≈ 138
6. A book that weighs 48N and is lifted 11.6m from the floor to a tabletop. How much work is required to
accomplish this task?
a certain lake, filled with fresh water, is 40 m deep and located at sea level. what is the absolute pressure (in kpa) at the bottom of the lake?
A certain lake, filled with fresh water, is 40 m deep and located at sea level. The absolute pressure (in kpa) at the bottom of the lake will be 492.1 kPa
P1 = rho * g * h
rho = density of water
g = acceleration due to gravity
h = depth
P1 = rho * g * h
= 997 * 9.8 * 40 = 390824 N / [tex]m^{2}[/tex] = 390.8 kPa
P(absolute pressure) = Po + P1
= 101.3 + 390.8 = 492.1 kPa
The absolute pressure (in kPa) at the bottom of the lake will be 492.1 kPa
To learn more about absolute pressure here :
https://brainly.com/question/12937139
#SPJ4
the largest magnetic quantum number (m or ml) of an atom in the ground state is found to be 8. what must be the largest angular momentum quantum number (l)?
The angular momentum quantum number / azimuthal quantum number for the magnetic quantum number of 8 is 7/2
The magnetic quantum number of the atom = 8
The azimuth (or orbital angular momentum) quantum number describes the shape of a particular orbital. This is denoted by the symbol 'l' and its value is equal to the total number of angular nodes in the trajectory. Azimuthal quantum number values can indicate either s, p, d, or f subshells with different shapes.
The angular momentum or azimuthal quantum number can be found using the formula,
m = 2l + 1
where m is the magnetic quantum number
l is the azimuthal quantum number
Let us substitute the known values in the above equation, we get
8 = 2l + 1
2l = 8 -1
2l = 7
l = 7/2
Therefore, the angular momentum quantum number is 7/2
Learn more about the quantum number in
https://brainly.com/question/16977590
#SPJ4
suppose the outer radius ra of a cylindrical capacitor was tripled, but the charge was kept constant. by what factor would the stored energy change?
The outer radius Ra of a cylindrical capacitor was tripled, The new stored energy will increase ( [tex]\frac{ln(3Ra/Rb)}{ln(Ra/Rb)}[/tex] ) times the initial stored energy .
Capacitance of a cylindrical capacitance = 2π∈o l / ln (Ra / R b)
U = [tex]Q^{2} / 2C[/tex]
U2 / U1 = [tex]\frac{\frac{Q^{2} }{2C2} }{\frac{Q^{2} }{2C1} }[/tex] = C1 / C2
= [tex]\frac{\frac{2*pi*epsilon*l }{ln(Ra/Rb)} }{\frac{ 2*pi*epsilon*l}{ln(3Ra/Rb)} }[/tex]
= [tex]\frac{ln(3Ra/Rb)}{ln(Ra/Rb)}[/tex]
U2 = U1 ( [tex]\frac{ln(3Ra/Rb)}{ln(Ra/Rb)}[/tex] )
The new stored energy will increase ( [tex]\frac{ln(3Ra/Rb)}{ln(Ra/Rb)}[/tex] ) times the initial stored energy .
To learn more about capacitance here :
https://brainly.com/question/14746225
#SPJ4
