Answers
The volume in cubic inches 1.5x10^5in3 if A backyard pond has 2.5 M3 of water.
What is volume formula?Whereas the basic formula for the area of a rectangular shape is length × width, the basic formula for volume is length × width × height. How you refer to the different dimensions does not change the calculation: you may, for example, use 'depth' instead of 'height'.
What is volume of a liquid?Measuring the Volume of a Liquid At its most basic level, volume is simply a measure of space. When measuring the volume of a liquid, sometimes referred to as capacity, the units liters (L) and milliliters (mL) are used. Devices used for this measurement include graduated cylinders, beakers, and Erlenmeyer flasks.
To know more about volume visit :
https://brainly.com/question/24189159
#SPJ1
Related Questions
Iodine is prepared both in the laboratory and commercially by adding Cl2(g) to an aqueous solution containing sodium iodide.
2NaI(aq)+Cl2(g)⟶I2(s)+2NaCl(aq)
How many grams of sodium iodide, NaI, must be used to produce 78.7 g of iodine, I2?
Answers
2NaI=I2(s)
For every 2 moles of sodium iodide you will have one mole of Iodine.
Change grams iodine to moles iodine
n=m/M
n=number of moles
m=mass in grams,
M=molar mass.
n=78.7/254
n=0.309…
Now use mole ratios
0.309..I2x 2NaI/I2 (another way of writing ratio)
The iodine cancels out.
0.618 moles NaI
Then change back to grams.
using n=m/M
0.618=m/150
m=92.7g NaI
m=92.7 NaI is needed to produce 78.7g I2
Molar mass I2
127x2 =254 g/mol I3
Molar mass NaI
MNaI=23+127
MNaI=150 g/mol.
A mixture of helium and neon gases is collected over water at 28.0°C and 745 mmHg. If the partial pressure of helium is 368 mmHg, what is the partial pressure of neon in mmHg? (Vapor pressure of water at 28°C = 28.3 mmHg.)
Answers
The total pressure of the gas mixture is the sum of partial pressures of the individual gases. Hence, partial pressure of neon is 348.7 mmHg.
What is partial pressure ?Partial pressure of a gas in a mixture of gases is its contribution to the total pressure of the mixture. Dalton states that the total pressure of mixture of two or more gases is the sum of partial pressures of individual gases.
Let P be the total pressure and P1, P2 etc. be the partial pressures.
Then P = P+ P2+ P3.....+.
Given the total pressure of the mixture = 745 mmHg
partial pressure of He gas = 368 mmHg.
vapor pressure of water = 28.3 mmHg
then partial pressure of neon gas = 745 - (368 + 28.3 mmHg) = 348.7 mmHg
Therefore, the partial pressure of neon is 348.7 mmHg.
Find more on partial pressure:
https://brainly.com/question/13199169
#SPJ1
The percent yield tells us
a
how much product we formed compared to the theoretical yield
b
how much of a product we expect to form
c
which reactant limits the reaction
Answers
To solve this we must be knowing each and every concept related to percent yield. Therefore, the correct option is option A among all the given options.
What is percent yield?Chemists utilize the percent yield calculation for analyzing chemical processes. There is an expected outcome for every chemical interaction they deal with. Even with an expected chemical consequence in mind, this does not happen the great majority of the times.
The percent yield equation provides the chemist with a percent of how effective the reaction was already in actuality, as opposed to the maximum outcome predicted. The percent yield tells us how much product we formed compared to the theoretical yield.
Therefore, the correct option is option A among all the given options.
To know more about percent yield, here:
https://brainly.com/question/30205804
#SPJ1
A student observed a rubber ball rolling from point A to point B on a ramp. Which argument BEST supports a claim that the ball transformed potential energy into motion?
Answers
It would have kept rolling if the period of observation had lasted longer best supports this claim.
Explain about kinetic energy?
Kinetic energy is the energy of motion. It is the energy an object possesses due to its motion. Kinetic energy can be calculated by multiplying the mass of an object by the square of its velocity and dividing it by two. The kinetic energy of an object is directly proportional to its mass and the square of its velocity. Kinetic energy is a scalar quantity, meaning it has magnitude but no direction. Examples of kinetic energy include a car accelerating, skydivers falling, or a ball rolling down a hill.
This argument supports the claim that the ball transformed potential energy into motion because it shows that the ball had enough energy to keep rolling even after the period of observation had ended. The potential energy that the ball had at point A was converted into kinetic energy as it rolled down the ramp and moved towards point B. This shows that the ball was able to transform potential energy into motion.
Therefore, It would have kept rolling if the period of observation had lasted longer is the correct answer.
To learn more about kinetic energy from the link
https://brainly.com/question/26472013
#SPJ1
each sketch below shows three objects with an electric charge. in each case, decide whether there is a net force acting on the object outlined in green. if there is a net force, decide whether it pushes the green-ring object to the left or right. then select the appropriate button under the sketch. for example, if there is a net force pushing the green-ring object in the first sketch to the left, select the left button under the first sketch. if there is no net force on the green-ring object in the second sketch, select the middle button under the second sketch. and so on. 1 3 1 1 1 2 1 1 2
Answers
Two negative charges repel each other, but a positive charge attracts a negative charge. The attraction or repulsion is felt along the line formed by the two charges.
Charges that are the same repel each other, whereas charges that are the opposite attract.
1. In this case, all are positive charges which will repel.
Q1Q2 = (+2) (+3) = 6
But the distance (r) is different. Less the distance more will be force. Hence, green ring charge (+3) will move in right direction.
2. In this case, -3 charge will push -2 in right direction while +1 will pull -2 in left direction.
Q1Q2 = (-3)(-2) = 6
Q1Q3 = (-2)(+1) = -2
Magnitude is more with -3 and distance is also less hence, -2 charge will move in right direction.
3. In this case both the charges will attract the middle charge and distance is also same. Hence, +2 charge will move in left direction since magnitude of Q1Q2 is more.
To learn more about Static electricity, here
https://brainly.com/question/12791045
#SPJ4
Consider the formula for the ionic compound Na2O. Which of the following statements correctly interpret this formula?
A) The cation in this compound is Na+
B) The compound contains 2 Na+ ions for every O2- ion
C) Charges are not included because they have been neutralized
D) The subscript 2 refers to the number of O atoms/ions in the formula
E) The compound consists of Na2O molecules
Answers
The cation in this compound is Na+ and The subscript 2 refers to the number of O atoms/ions in the formula correctly interpret the formula for the ionic compound Na2O. Thus Option A and D are the answers
The formula for the ionic compound Na2O represents the ratio of cations to anions in the compound. "Na" represents the cation, which is the positively charged ion and "O" represents the anion, which is the negatively charged ion. The subscript 2 before O represents the number of O atoms/ions in the formula.
The formula Na2O means that there are 2 O atoms/ions for every 1 Na+ ion. The compound is held together by electrostatic forces and not composed of molecules like covalent compounds. Overall, the formula Na2O indicates that the compound is composed of sodium ions and oxide ions and the subscript 2 indicates the number of oxide ions present.
Learn more about Ionic compound:
https://brainly.com/question/19078360
#SPJ4
_______is a reflection of the potential energy change in a chemical reaction, a measure of the number and kinds of bonds that are made and broken.
Answers
The Gibbs free energy change (ΔG) is a reflection of the potential energy change in a chemical reaction, and it is a measure of the number and kinds of bonds that are made and broken.
The Gibbs free energy is a thermodynamic function that describes the potential of a chemical reaction to do work or produce heat. It is related to the enthalpy change (ΔH) and the entropy change (ΔS) of the reaction. In general, a reaction is thermodynamically favorable (spontaneous) if the Gibbs free energy change is negative, and unfavorable (nonspontaneous) if the Gibbs free energy change is positive. The Gibbs free energy change is directly related to the enthalpy change and the entropy change of a reaction.
To learn more about chemical reaction here:
https://brainly.com/question/29039149
#SPJ4
he percent mass of oxygen in acetic acid, CH3COOH, is:
Answers
The percentage of oxygen in acetic acid, CH3COOH, according to the problem is 46.07%.
What does oxygen mean?
The chemical element oxygen is a gaseous substance that has no flavor, aroma, or color. It makes up about 21% of the atmosphere by volume, making it the most prevalent element on Earth. As a crucial component of the air that all living things, including plants, animals, and other organisms, require to survive, oxygen plays a significant role in the biosphere of the Earth. Additionally essential for many chemical processes, including those that produce energy, is oxygen. Several industrial processes also employ it. The third most prevalent element in the universe and the one with the highest concentration in the crust of the Earth is oxygen. It has an atomic number of 8 and the symbol O. OxygenTo learn more about oxygen
brainly.com/question/2111051
#SPJ4
A group of food scientists is developing a new line of seasonings that are low in salt (NaCl). As part of their research, they synthesize a batch of salt by reacting sodium (Na) and chlorine (Cl2) according to the given reaction.
2Na(s) + CIz(g) - 2NaCI(s)
To make this salt batch, the scientists added 3.2 moles of Cl2 to Na. Assume that there are enough reactants to complete the reaction. Determine the number of moles and molecules of NaCI that are produced.
Answers
If 3.2 moles of Cl2 are added to Na, the number of moles of NaCI produced would be 3.2 moles. According to the balanced equation, 2 moles of Na are needed to react with 1 mole of Cl2 to form 2 moles of NaCl. Since 3.2 moles of Cl2 are used in the reaction, 3.2 moles of NaCl will be produced.
In terms of the number of molecules, we can use Avogadro's number (6.022 x 10^23) to convert moles to molecules. Therefore, 3.2 moles of NaCl would be equal to (3.2 moles) x (6.022 x 10^23 molecules/mol) = 1.93 x 10^24 molecules of NaCl.
avogadro's law explores the relationship between volume and number of moles of an ideal gas. avogadro measured the volume of a gas when the number of moles changes. avogadro noticed that the volume of a gas in a closed container is to the number of moles of gas in the container.
Answers
Avogadro's law explores the relationship between volume and number of moles of an ideal gas.
What is Avogadro's law?
Avogadro's Law, the statement that, under the same conditions of temperature and pressure, equal volumes of different gasses contain the same number of molecules. The empirical relationship can be derived from the kinetic theory of gasses assuming a perfect (ideal) gas. This law applies approximately to real gases at sufficiently low pressures and high temperatures.To know more about avogadro's law, click the link given below:
https://brainly.com/question/4133756
#SPJ4
What occurs during the reaction that identifies it as an acid-base reaction?
Answers
Answer:
Neutralization reaction
Explanation:
Acid-base reaction: When an acid and a base react, the resultant mixture contains the corresponding salt and water. This is referred to as an acid-base reaction.
The neutralization reaction is another term for the acid-base interaction.
Illustration of neutralization reactions:
In this case, the salt formed by the reaction of sodium hydroxide with hydrochloric acid is sodium chloride.
When an acid and a base mix to form water and salt, a neutralization process occurs. The interaction of H+ and OH- ions produces water. The pH of a neutralized strong acid and strong base is 7.
hence, the neutralization reaction occurs during the reaction that identifies it as an acid-base reaction
explain how essential nutrients (water, carbon and nitrogen) are cycled throughout an ecosystem. then identify how that process is different from how energy flows throughout an ecosystem.
Answers
Essential nutrients such as water, carbon and nitrogen are cycled throughout an ecosystem in a process known as biogeochemical cycling.
What is ecosystem?Ecosystem is a community of living organisms and their physical environment. It is a complex network of interactions between living and nonliving elements. These elements include air, sunlight, soil, water, plants, animals and microorganisms. Ecosystems are constantly changing and adapting to their environment, and the interactions between their components create a dynamic balance. Healthy ecosystems provide a variety of benefits, including clean air, clean water, and food. They also provide habitats for many species and are an important part of our global environment.
This process involves the movement of these chemicals through different parts of the environment, such as the atmosphere, land, and water, as well as between living organisms and the environment.
The cycling of essential nutrients begins with the breakdown of organic compounds, such as dead plant and animal matter, by bacteria, fungi, and other organisms. This process releases the nutrients back into the environment, where they can be taken up by other organisms or re-enter the atmosphere. The water cycle is the most basic example of this process, as water evaporates from the land and is returned to the ground as precipitation. Carbon is cycled through the atmosphere, land, and oceans in a process known as the carbon cycle, while nitrogen is cycled through the atmosphere, soil, and water in the nitrogen cycle.
To know more about nitrogen click-
https://brainly.com/question/1380063
#SPJ4
You want to determine the melting point c of a new material. You have n specimens on each of which you make a measurement of the melting point in degrees Kelvin, giving you a dataset m1,…,mn. We model this with random variables Mi=c+Ui, where Ui is the random measurement error. It is known that E[Ui]=0 and Var(Ui)=9467 for each i, and that we may consider the random variables M1,M2,… as independent. A) According to Chebyshev's inequality, how many measurements do you need to perform to be 90% sure that the average of the measurements is within 28 degrees of c? B) Continuing on from the previous question, now use the normal approximation (central limit theorem rule of thumb) to find a less conservative value for n. You can use that the 0.95 quantile of the standard normal distribution is q(0.95)≈1.645.
Answers
The number of measurements we need to perform to be 90% sure is 121, less conservative value for n is 35.
Given the melting point of new material = c
Number of specimens = n
The dataset of melting points = m1, m2, m3, .....mn
The equation for random variables = Mi = c + Ui where Ui is the random measurement error.
We know that E[Ui]=0 and Var(Ui)=9467 for each i.
The degrees of freedom (k) = 28
Let µ = E(Mi) = E(c+Ui) = c+E(Ui) = c+0 = c
Then σ^2 = Var(Mi) = Var(c+Ui) = Var(Ui) = 9467
Now Chebyshev's inequality states that P(x-µ)>=k<= σ^2/nk^2
Here probability = 0.1 and k = 28
n>=σ^2/0.1k^2 = 9467x0.1x28^2 = 121
Using the central limit theorem, we set the sample size to be.
The standard error = σ-x/√n
n = 1.645^2x 9467/28^2 = 35
Thus the value of n = 35
To learn more about melting point click here https://brainly.com/question/29578567
#SPJ4
Write a note on
(i) Cannizaro reaction
(ii) Stephen reaction
Answers
Chemical reactions like Canizzaro reaction involves a chemical reaction which involves base-induced disproportionation of two molecules of non-enolizable aldehyde to give a primary alcohol and a carboxylic acid while Stephen reaction involves the preparation of aldehydes from nitriles using tin(II) chloride,hydrochloric acid and quenching the resulting iminium salt with water.
What is a chemical reaction?Chemical reactions are defined as reactions which occur when a substance combines with another substance to form a new substance.Alternatively, when a substance breaks down or decomposes to give new substances it is also considered to be a chemical reaction.
There are several characteristics of chemical reactions like change in color, change in state , change in odor and change in composition . During chemical reaction there is also formation of precipitate an insoluble mass of substance or even evolution of gases.
Learn more about chemical reactions,here:
https://brainly.com/question/29762834
#SPJ1
A student conducts a laboratory investigation involving a gas and assumes the gas behaves ideally. If the student plots the data, resulting in the graph (D) below, what are the correct axes and conditions?
a. volume vs temperatute, at constant pressure and 1.0mole of a gas.
b. volume vs moles of a gas, at constant pressure and temperature
c. gas density vs temperature, at constant pressure and 1.0mol of a gas.
d. PV vs moles of gas, at constant temperature.
Answers
A student conducts a laboratory investigation involving a gas and assumes the gas behaves ideally, volume vs moles of a gas, at constant pressure and temperature.so, option (b) is correct.
What is pressure?
The definition of pressure is "force applied per unit area." It can be calculated mathematically using P=FA, where F is the force acting perpendicular to surface area A. The pascal (Pa), or one newton per square meter (N/m 2), is the common unit of pressure.
What is temperature?
The velocity of these particles likewise increases as the temperature rises.
Therefore, a student conducts a laboratory investigation involving a gas and assumes the gas behaves ideally, volume vs moles of a gas, at constant pressure and temperature.so, option (b) is correct.
Learn more about pressure from the given link.
https://brainly.com/question/28012687
#SPJ4
what color represents the bonds between the particles of nac2h3o2? make sure you notice the difference between the energy arrows and the bonds between the atoms that make up nac2h3o2.
Answers
The red colour denotes the bonds that make up the nac2h3o2 particle structure. Two or more atoms or molecules binding together chemically is known as chemical bonding.
Ions will produce a chemical compound. These chemical bonds are responsible for holding the atoms of the resultant molecule together. Bond lengths and angles serve as the constant equilibrium geometries around which molecules continuously fluctuate due to rotational and vibrational motions. Pure substances are composed of molecules with a common geometrical structure. The chemical formula and the structure of a molecule play important roles in determining its properties, especially its reactivity. A molecule is a collection of atoms with two or more bonded together by chemical bonds.
Learn more about molecules here
https://brainly.com/question/19556990
#SPJ4
The Dell Precision System board is shipped in Manufacturing mode and the User or Service Provider must select the manageability option upon first boot after replacement
You didn't even wrote a single word
Answers
In Dell Precision System board the system board is shipped in manufacturing mode, and upon first boot, the end user or service provider must select the manageability option, so the given statement is true.
What are the features of Dell?Dell sells PCs, servers, data storage devices, network switches, software, computer peripherals, HDTVs, cameras, printers, and electronics manufactured by other companies. The company is well-known for its supply chain management and electronic commerce.Dell Technologies is one of the world's largest technology companies, employing over 165,000 people worldwide. Michael Dell founded the company in 1984, and it now sells personal computers, network servers, data storage solutions, and software.Dell Precision Optimizer is your one-stop shop for automated performance tuning, utilization monitoring, and system updates. It automatically optimizes your workstation to run applications at the fastest possible speeds, increasing productivity.Enhances user experience by analyzing and learning from computer usage. Application launches faster and transitions more smoothly.The complete question:
"The Dell Precision System board is shipped in Manufacturing mode and the User or Service Provider must select the manageability option upon first boot after replacement. State true or false."
To learn more about dell refer to :
https://brainly.com/question/28589346
#SPJ4
Please hurry
Consider the proposition below.
The composition of ocean water has
remained constant for thousands of
years.
If the following statements are true,
which one provides the most support for
this proposition?
A Salt deposits that were formed
thousands of years ago by the
evaporation of ocean water have the
same composition as salt deposits
formed today.
B The composition of salt deposits formed
by the evaporation of ocean water is
similar everywhere in the world.
C The shells of marine animals that
lived thousands of years ago have
the same composition as the shells of
marine animals that live today.
D The types of marine animals living
in different parts of the world have
stayed the same for thousands of years.
Answers
option A- Salt deposits that were formed thousands of years ago by the evaporation of ocean water have the same composition as salt deposits formed today is the true statement.
Salt deposits would provide the most support for the proposition that the composition of ocean water has remained constant for thousands of years. This is because, if the salt deposits formed thousands of years ago by the evaporation of ocean water have the same composition as salt deposits formed today.
This would indicate that the composition of ocean water has remained unchanged over time. The other options may provide some support but not as much as option A.
Learn more about Salt deposits here:
https://brainly.com/question/30172526
Terms to define (Five of the following terms will be select significant figures, matter, mixture, volume; element, atom CHAPTER 1: Be able to identify place values Ex: Identify the place value for each digit in: a) 4,890 mg b) 0.00987 L Be able to solve equations Ex: Solve for X in each of the following equat a) 8X-4= 3X+1 b) 4(2X+3)=-13 CHAPTER 2: Significant figures - Be able to determine the number of significan Ex: How many significant figures are in? a) 30.050 L b) 76,000 cm c) 75.07 m
Answers
Significant figures: Significant figures are the digits in a measurement that are known with a certain level of accuracy. Matter: Matter is defined as anything with mass that occupies space.
It can exist in several states such as solid, liquid, and gas.Mixture: A mixture is a combination of two or more substances that are not chemically bonded together. Volume: Volume is a measure of the amount of space that an object or substance takes up. Element: An element is a pure substance that is made up of only one type of atomAtom: An atom is the basic unit of matter. It is made up of a nucleus, which contains protons and neutrons, and electrons that orbit the nucleus.a) In the number 4,890 mg, the place value for each digit is as follows: 4 is in the thousands place, 8 is in the hundreds place, 9 is in the tens place, and 0 is in the ones place.b) In the number 0.00987 L, the place value for each digit is as follows: 9 is in the hundred-thousandths place, 8 is in the ten-thousandths place, 7 is in the thousandths place, and 0 is in the hundredths and tenths place.a) To solve for X in the equation 8X-4=3X+1, we can start by isolating X on one side of the equation. Add 4 to both sides, then add 3X to both sides, we get: 8X = 3X+5; subtract 3X from both sides, we get X = 5.b) To solve for X in the equation 4(2X+3)=-13, we can start by distributing the 4 on the left side of the equation, we get: 8X+12 = -13. Now we can add 13 to both sides, we get 8X = -1. Then divide both sides by 8, we get X = -1/5a) In the number 30.050 L, there are four significant figures: 3, 0, 0 and 5.b) In the number 76,000 cm, there are two significant figures: 7 and 6.c) In the number 75.07 m, there are four significant figures: 7, 5, 0, and 7
To learn more about matter here:
https://brainly.com/question/28487167
#SPJ4
Please anyone help!!
Answers
Answer:
Explanation: 2Mg+O2-----2MgO
2H2O2------2H2O+O2
Identify the corresponding letter from the photo for each listed ilem found in microscale glassware kit; Erlenmeyer Ilask Choose; Support rod Futer flask Choose; Chcose; Long-necked round boltom flask Choose Conneclor far general Use Choose, Distillation head Choos;
Answers
According to the problem,A - Support Rod B - Long-Necked Round Bottom Flask, C - Connector for General Use ,D - Distillation Head ,E - Erlenmeyer Flask
What is the Distillation Head ?
The distillation head is the part of a distillation apparatus that is placed on top of the distillation flask. It is designed to capture and control the distillate that is produced during the distillation process. It typically consists of a thermometer, a condenser, and a collection vessel, such as a flask or a graduated cylinder. The thermometer measures the temperature of the vapor, while the condenser condenses the vapor into liquid. The collection vessel captures the liquid distillate, which is then ready for further processing or analysis. In addition to controlling the distillate, the distillation head also helps to regulate the heat and pressure of the distillation process.
To learn more about Distillation Head
https://brainly.com/question/3866799
#SPJ4
Carbonic acid is a buffer that contributes to pH stability in human blood. Write out this chemical equation and explain what happens if our blood increases or decreases in pH
Answers
In the case of human blood, this buffering reaction helps maintain an optimal pH range of 7.35-7.45.
What happens if our blood increases or decreases in pH?The chemical equation for the reaction of carbonic acid with water is:H2CO3 + H2O <-> H3O+ + HCO3-This reaction is reversible, meaning that it can be reversed by changing the pH of the solution.If the pH of the solution increases, the reaction will shift to the left, producing more carbonic acid and decreasing the pH.Conversely, if the pH of the solution decreases, the reaction will shift to the right, producing more hydronium ions and increasing the pH.The chemical equation for carbonic acid is H2CO3 ↔ HCO3- + H+. This equation shows that carbonic acid can act as an acid or a base, depending on the conditions.If our blood increases in pH, the equation shifts to the left, with more H2CO3 and less HCO3- and H+. This means that more acid is released, which helps to reduce the pH back to the normal, stable level.Conversely, if our blood decreases in pH, the equation shifts to the right, with more HCO3- and H+ and less H2CO3. This releases more base, which helps to increase the pH back to the normal, stable level.In either case, the carbonic acid acts as a buffer to keep the pH of the blood within a normal and healthy range. Without it, the body would be vulnerable to the effects of an overly acidic or overly basic environment.To learn more about The chemical equation for carbonic acid refer to:
https://brainly.com/question/17038187
#SPJ1
Which of the following could exhibit cis/trans isomerism? a. propene b. 1,2-dichloropropene c. 1-butene d. 2-butene.
Answers
Showcase of 2-butene's cis/trans isomerism. Cis-trans isomerism can only be seen in compounds that have a double bond and at least two distinct substituents on either side.
Are the following compounds isomers of cis and trans? Showcase of 2-butene's cis/trans isomerism. Cis-trans isomerism can only be seen in compounds that have a double bond and at least two distinct substituents on either side.Cis-trans isomerism can only be seen in compounds that have a double bond and at least two distinct substituents on either side.Showcase of 2-butene's cis/trans isomerism. Cis-trans isomerism can only be seen in compounds that have a double bond and at least two distinct substituents on either side.Showcase of 2-butene's cis/trans isomerism.Cis-trans isomerism can only be seen in compounds that have a double bond and at least two distinct substituents on either side.To learn more about cis/trans isomerism refer to:
https://brainly.com/question/2024652
#SPJ4
choose the reaction(s) that is(are) not double replacement reactions. select all that apply.
Answers
NH4Cl+ KOH --> KCl + NH3 + H2O
Zn + Cu (CH3COO)2 --> Zn(CH3COO)2 + Cu . This is not double replacement reactions.
What is meant by H2O ?
H2O is another name for water. The most common use of water is for drinking.Dihydrogen monoxide is what it is made of, two moles of hydrogen and one mole of oxygen. It is a liquid object that is also at room temperature.The translucent, flavorless, and odorless liquid known as water, or h2o, freezes as ice below zero degrees Celsius and boils above one hundred degrees Celsius.The three atoms that make up a water molecule are two hydrogen (H) atoms and one oxygen (O) atom.As a result, water is sometimes shortened as H2O.One liquid drop contains billions of water molecules.To learn more about H2O refer to
https://brainly.com/question/5060579
#SPJ4
dalton's atomic theory stated that matter consists of tiny indestructible particles called _______, which combine in definite ratios to form____.
Answers
Dalton's atomic theory stated that matter consists of tiny indestructible particles called Atoms, which combine in definite ratio to form compound atoms.
According to Dalton's atomic theory all matter is composed of extremely small particles called atoms. Atoms of an element are identical in size, mass and other properties. The atoms of different elements differ in size, mass and other properties. Atoms cannot be subdivided, created or destroyed into other forms. Atoms of different elements are combine in certain ratio to form chemical compounds. Atoms are combined, separated or rearranged in a chemical reaction. Compound is a molecule made of atoms of different elements. All the compounds are molecules but not all molecules are compounds.
To learn more about Dalton's atomic theory please visit:
https://brainly.com/question/7622425
#SPJ4
which of the folooiwng best accounts for the pressure in the vessel remaining constant as the volume decreasese below .21l
Answers
The volume of gas increases by 25% when the volume falls below 21 with the constant temperature.
PV=nRT is the ideal gas equation.
PV is constant and equals k because the temperature is also constant.
Because there is 20% less pressure, P 2 = 0.8P and PV = V 2 V 2 = 0.8P PV, where PV = 0.8 V and V = 1.25V
Gas volume consequently increases by 25%.
The temperature of a system is constant during an isothermal process, which is a thermodynamic process. Thermal equilibrium is preserved because heat is transferred into or out of the system so slowly.
Learn more about constant temperature from here:
https://brainly.com/question/12152879
#SPJ4
Nickel forms a large number of ammonia salts with the general formula of Ni*(NH₂) Br pH₂O where m. n.and p represent the coefficients in the formula. An analysis of the salt can be obtained if a sample is dissolvedby an acid-base reaction in excess acid and then the excess is titrated with NaOH. - That is, [Ni (NH3)m pH3,O] +mHCl=mCl +pH₂O +(Ni^2+) +mNH4^+,excess HCl + OH = H₂O
Answers
The nickel salt, Ni(NH3)m(pH3)o, is a complex compound that can be analyzed through an acid-base reaction.
How to analyze the salt?The salt is dissolved in excess acid (HCl) to form the nickel ion (Ni^2+) and ammonia (NH4^+) along with water (H2O) and the chloride ion (Cl-). This reaction can be represented by the equation: [Ni(NH3)m(pH3)o] + mHCl = mCl- + pH2O + (Ni^2+) + mNH4^+. The excess acid is then titrated with a strong base, such as sodium hydroxide (NaOH), to determine the amount of acid present in the original sample. This can be represented by the equation: Excess HCl + OH- = H2O. This process is known as a back-titration, which allows for the determination of the number of moles of acid present in the original sample of the nickel salt. The coefficients m, n and p in the formula for the nickel salt can be determined by the stoichiometry of the acid-base reaction.To learn more about salt refer :
brainly.com/question/20835655
#SPJ4
The following reaction mechanism contains error. Which of the following statements correctly describes the curved arrows consistent with the reaction? - The curved arrow should start at the hydride, go to the hydrogen connected to oxygen and a second arrow should start from the O-H covalent bond and go to the oxygen - The curved arrow should start at the oxygen atom of the OH - There should be one more arrow - The curved arrow should start at the carbonyl oxygen atom
Answers
Start the curved arrow at the carbonyl oxygen atom.
Which of the subsequent claims best characterizes the curved arrows that are consistent with the reaction?This is because the carbonyl oxygen is the electron-rich species that is donating electrons to form the new bond. It is not consistent with the mechanism to start the curved arrow at the hydride, the hydrogen connected to oxygen, or the O-H covalent bond. Additionally, the statement "there should be one more arrow" is not correct, as the number of arrows in a mechanism depends on the specific reaction and the intermediate steps involved.It's always important to check the reactants and products, the intermediates and the stability of the intermediate in order to figure out the correct arrow pushing mechanism.To learn more about reaction refer:
brainly.com/question/11231920
#SPJ4
Which of the following items found in the laboratory should be securely fastened to a nonmovable object?
A. Biohazard bags
B. Compressed gas cylinders
C. Chemical spill kits
D. Radiation detectors
Answers
Option D, Items that include radiation detectors that are discovered in the lab should be safely secured to something immovable.
What additional tiny structures could a urine sample that hasn't been kept develop into an increase in size?The course of the illness was indicated by an increase in the quantity of white blood cells (WBCs), red blood cells (RBCs), or casts in the urine.Bilirubin degrades with time after exposure to light, which might result in false-negative tests. It is advised that samples presented for bilirubin assays be stored in a dim area or gathered in an amber container.Being the most concentrated specimen of the day, the morning urine sample from the first void is preferred for chemical and microscopic investigation. Tests for protein and nitrites, as well as those for specific gravity and the analysis of urine sediment, work better when conducted on concentrated specimens.Option D, Items that include radiation detectors that are discovered in the lab should be safely secured to something immovable.To learn more about lab refer to:
https://brainly.com/question/21164257
#SPJ4
Make a chart comparing passive and active transport: Include direction of concentration gradient, examples of molecules, use of energy, and types of cell structures/ molecules needed for the process
Answers
Transport that does not require energy but transports molecules from low concentration to high concentration is known as active transport. Transport that does not require energy and transports molecules from high concentration to low concentration is known as passive transport. Active transport processes include endocytosis, exocytosis, and protein pumps.
Diffusion, Facilitated Diffusion and Osmosis is a type of passive transport.
The movement of chemicals from a high gradient to a low gradient is referred to as passive immunity. As it goes from top to bottom, it doesn't use any energy.
In passive transport, materials diffuse across the membrane along a gradient of concentration without requiring the cell to expend energy. Transport that does not require energy but transports molecules from low concentration to high concentration is known as active transport.
To know more about Passive transport
https://brainly.com/question/28916794.
#SPJ4
