A balloon contains a mixture of 2 gases, j and k. if the pressure in the balloon is 1.75 atm and there are 6 moles of j and 4 moles of k present, what is the partial pressure of each gas?

A mass of 10 kg is dropped from height of 20 m. ignoring air resistance, maximum speed it achieves is 20m/s.

Here on Earth, we tend to take the air resistance (aka. “drag”) for granted. We just assume that when we throw a ball, launch an aircraft, deorbit a spacecraft, or fire a bullet from a gun, that act of it traveling through our atmosphere will naturally slow it down. But what is reason for this? Just how is air able to slow object down, whether it is in free-fall or in flight?

Because of our reliance on air travel, our enthusiasm for the space exploration, and our love of sports and making things airborne (including ourselves), understanding air resistance is key to understanding physics, and integral part of many scientific disciplines. As part of subdiscipline known as fluid dynamics, it applies to the fields of aerodynamics, hydrodynamics, astrophysics, and nuclear physics (to name a few).

By definition, the air resistance describes the forces that are in opposition to the relative motion of an object as it passes through the air. These drag forces act opposite to oncoming flow velocity, thus slowing the object down. Unlike other resistance the forces, drag depends directly on velocity, since it is the component of the net aerodynamic force acting opposite to the direction of the movement.

so,

PE = mgh = 10 kg x 10 m/s^2 x 20 m = 2000 J

KE = 1/2 mv^2

2000 J = 1/2 x 10 kg x v^2

4000 J = 10 v^2

400 = v^2

20 = v

To know more about air resistance visit : brainly.com/question/19165683

#SPJ4

The field to rotate this dipole from an orientation of 36.0 does a lot of work. In order to find out how much work is done, we need to consider the rotational energy of the dipole. The rotational energy is given by:

E = 1/2 * I * omega^2

where I is the moment of inertia of the dipole and omega is the angular velocity. From the given information, we can calculate the rotational energy to be:

E = 1/2 * I * (36.0 * 2 * pi / 360)^2

= 1/2 * I * 4 * pi^2

= 2 * I * pi^2

Thus, the work done by the field is:

W = 2 * I * pi^2 * 36.0

= 72 * I * pi^2

Learn more on work done here:

https://brainly.com/question/1634438

SPJ4

The block with the greatest density = Block A

The block with the lowest density = Block B

The density of an object is the ratio of mass to volume of the object.

density = mass/volume

The given density of the object;

Thus, we can conclude the following based on the density of the objects;

The block with the greatest density = Block A

The block with the lowest density = Block B

Learn more about density here: https://brainly.com/question/6838128

#SPJ1

Answer:

Reducing the use of non-renewable energy sources preserves that resource so it does not run out.

Explanation:

Non-renewable energy is limited. The word renewable means "not depleted when used." Meaning that there is ultimately an infinite amount of the source. If an energy source is NON-renewable it will eventually run out.

Answer:

1.69 km away from the finish line.

Explanation:

velocity =distance/time

time= distance/velocity so 8km/14.3km per hour equal to 80/143 hr or 0.559 hrs for second runner to finish race

therefore 0.559 multiply by velocity to give distance of first runner when second runner finish race

0.559 times by 11.3= 6.32 km (3 significant figures)

8 km - 6.32km

= 1.69 km away from the finish line.

1) The body moved from 0 cm to 4 cm at a constant speed of 1 cm/s.

2) The object moved at a constant speed of 3 cm/s from 0 cm to 3cm

3) Two objects are speeding up and one object is slowing down.

4) The object moved from 4s to 8s at a constant speed of 4 cm/s

5) The horizontal line appears at 5 m/s is the second graph.

We know that acceleration has to do with the change of of velocity of an object with time.

1) We can see that the position changes by equal amounts in equal time intervals thus the body moved from 0 cm to 4 cm at a constant speed of 1 cm/s.

2) Looking at the shape of the second graph we can see that the object moved at a constant speed of 3 cm/s from 0 cm to 3cm

3) From the images of the ticker tapes, we can see that two objects are speeding up and one object is slowing down.

4) From the fourth graph, we can see that the object moved from 4s to 8s at a constant speed of 4 cm/s

5) The graph in which the horizontal line appears at 5 m/s is the second graph.

Learn more about acceleration:https://brainly.com/question/12550364

#SPJ1

The time taken by cheetah to catch its prey is  9.71 s.

Speed is the defined as the distance covered per unit time by a moving body or object.

The speed of the gazelle = 79.9 km/h = 22.2 m/s

speed of the cheetah = 108 km/h = 30 m/s

Let distance covered by gazelle = d

distance covered bet cheetah = d + 75.8

The time taken is same for both = t

time = distance/speed

time taken by cheetah = d + 75.8/30

time taken by gazelle = d/22.2

equating both times: d + 75.8/30 = d/22.2

30 d - 22.2 d = 1682.76

d = 215.7 m

Therefore, time taken by cheetah = (215.7 + 75.8)/30

t = 9.71 s

Learn more about speed and time at: https://brainly.com/question/26046491

#SPJ1

Average speed = 3.6km/h

The overall distance the object covers in a given amount of time is its average speed. A scalar value represents the average speed. It has no direction and is indicated by the magnitude.

Calculating the ratio of the body's total distance traveled to the time needed to complete that distance yields the average speed formula. As stated in the average speed equation:

S average =  Total Distance traveled/Total Time taken

A scalar value represents the average speed. The change in position or displacement (x) divided by the time intervals (t) during which the displacement happens is the definition of average velocity. The average velocity is measured in meters per second or M/s.

To learn more about average speed please visit-
https://brainly.com/question/12322912
#SPJ9

Starting from rest, a 2-kg body acquires a speed of 8 m/s in 2 seconds. the net force acting on the body is: 8 N

To solve this exercise the formula for net force and the formula for uniformly varied rectilinear motion (UVRM) to be applied are:

Where:

Information about the problem:

Applying the formula for UVRM we can calculate the acceleration of the runner:

a = (vf - vi) /t

a = (8 m/s - 0 m/s) / 2s

a = 8 m/s / 2s

a = 4 m/s²

With the acceleration we can apply the net force formula and get:

F = m * a

F = 2 kg * 4 m/s²

F = 8 N

It is the physical magnitude that expresses the effort necessary to move the mass of one kilogram with an acceleration of one meter per second squared, this is expressed in units of the international system in Newton.

Learn more about force at: brainly.com/question/12970081

#SPJ4

12.2 millimeters is the typical wavelength.

Typically, consumer ovens operate at 2.45 gigahertz (GHz), or 12.2 centimeters, of wavelength (4.80 in).

According to the Encyclopedia Britannica, microwaves have frequencies that range from approximately 1 billion cycles per second, or 1 GHz, up to approximately 300 GHz, and wavelengths that range from approximately 30 centimeters (12 inches) to 1 millimeter (0.04 inches).

Additionally, they typically ran at a frequency of 2.45 GHz. It was agreed that microwave ovens should be granted a few megahertz of space in both directions since, despite extensive shielding, their potent emissions could occasionally interfere with nearby frequencies.

To know more about microwaves, visit:

https://brainly.com/question/1593533

#SPJ4

Yes, the canoeist is likely to be able to reach the paddle, the canoeist realizes that the canoe's paddle is still on the dock, and so carefully crawls back to the front of the 3.

Displacement is a vector quantity. This indicates that it has both a direction and a magnitude and that it is visually represented as an arrow that points from the starting position to the ending position.

As given in the problem a 56 kg canoeist sits at rest at the back of a 23kg canoe. the canoe is at rest in the still water of a lake with its front end about 50 cm from the end of the dock.

the canoeist realizes that the canoe's paddle is still on the dock, and so carefully crawls back to the front of the 3.

Thus, paddles will most likely be within the canoeist's grasp.

Learn more about displacement here

https://brainly.com/question/10919017

#SPJ1

The gas that has the largest proportional increase in mass when moving from the upper troposphere to the surface is water vapor.

As we move away from the earth surface, we encounter a region of gases. This thin layer of gases that overlay the surface of the earth is what we call the atmosphere. There are many gases that are part of the atmosphere.

As we move away form the atmosphere, we encounter another region that lies shortly above the atmosphere called the troposphere. There is a lot of water in the troposphere because it is quite close to the earth surface.

Hence, the gas that has the largest proportional increase in mass when moving from the upper troposphere to the surface is water vapor.

Learn more about troposphere:https://brainly.com/question/13497783

#SPJ1

Create a plate with three points of reference. On the two side points put the two compounds separately and in the middle one combine both compounds.

The Rf value of a substance is used to identify the properties of that compound. The Rf value of polar compounds is lower, while the Rf value of non-polar compounds is higher. Three lanes are the most prevalent method for assessing too close spots. Compound A is in lane 1. Compound B is in lane 3. Both spots are in lane 2. This is known as a co-spot. If the co-spot exhibits a 'snowman' effect whenever the TLC is run, it indicates that perhaps the spots are, in a real sense, different compounds which are extremely close together. You could also try changing the solvent system, yet co-spot always comes first.

To learn more about the rf value: brainly.com/question/17751879

#SPJ4

The density of the object is 1001 kg/ m³.

To find the density of the object, the given values are,

Weight in Air = 80.8 N

Weight in water = 18.6 N

The density can be defined as the mass of a unit volume of a material substance.

The formula for density is,

                                  d = M/V,

where d is density, M is mass, and V is volume.

The unit of density is Kg/m³.

As we know only the weight in air and water, we have to use the formula of buoyant force,

Fb = Fair - F water

    = 80.8 - 18.6

    = 62.2 N

The buoyant force Fb = 62.2 N.

The density of the object should find, for that the velocity will be calculated using the density of the water.

The formula of buoyant force,

Fb = ρVg

where, ρ - density of water, V- velocity, g- acceleration due to gravity.

Substituting the known values,

62.2 = 1000 × V × 9.8

V = 62.2 / ( 1000× 9.8)

Thus,

V = 6.34 × 10⁻³ m³.

To find the object density,

Fb = ρVg

62.2 = ρ × 6.34 × 10⁻³   × 9.8

ρ = 62.2 / (6.34 × 10⁻³   × 9.8)

   = 62.2 / 62.132 ×10⁻³

   = 1001 kg/ m³

The density of the object is 1001 kg/ m³.

Learn more about the density,

https://brainly.com/question/15164682

#SPJ4

Explanation:

i hope this is the right way to solve it

The correct answer is S = 28.802 m.

Unless driven to change its condition by an external force, a body stays in its state of rest or uniform motion along a straight line. According to the law, a force is a factor that has the power to alter an object's status. Newton uses the inertia of rest, the inertia of motion, and the inertia of direction to explain his first law of motion.

From Newtons 1st equation of motion

V = u+at

3.06 = 0+0.8[tex]t_1[/tex]

[tex]t_1[/tex] = 3.825 s

Submarine travels [tex]t_2[/tex]= 5s with const velocity

and then again [tex]t_2[/tex]=5s for slowing to strip during slow,

0 = 3.06 - a × 5

a = 0.612 m/[tex]s^2[/tex]

Total time =[tex]t_1 + t_2 + t_3[/tex]

T = 13.825 s

Now [tex]v^2= u^2[/tex]+2as

[tex]S_1[/tex]= (3.06[tex])^2[/tex]/2×0.8

[tex]S_1[/tex] = 5.852 m

[tex]S_2[/tex] = Ut

[tex]S_2[/tex] = 3.06 × 5

[tex]S_2[/tex] = 15.3 m

[tex]S_3[/tex] = 0 - (3.06[tex]) ^2[/tex]/-2 × 0.612

[tex]S_3[/tex] = 7.65 m

Total displacement

[tex]S = S_1+S_2+S_3[/tex]

S = 28.802 m

To learn more about Newton's 1st equation of motion refer the link:

https://brainly.com/question/27573481

#SPJ9

The displacement between 5 s and 20 s in the position-time grap is +40 m

Displacement is defined as the distance travelled in a specific direction. It can be obtained mathematically as:

Displacement = Displacement 2 - Displcemrnt 1

With the above information, we can obtain the displacement. Details below.

From the question given above, we can obtain the displacement as follow:

Displacement = Displacement 2 - Displcemrnt 1

Displacement = 50 - 10

Displacement = +40 m

Thus, the displacement is +40m

Learn more about displacement:

https://brainly.com/question/187730

#SPJ1

Missing part:

See attached photo

Answer: Large-scale surface ocean currents are driven by global wind systems that are fueled by energy from the sun. These currents transfer heat from the tropics to the polar regions, influencing local and global climate.

Explanation:

I hope this helped you some!

No. That would be silly.  The water in the tropics is the warmest, since the sun is most direct there.  

Any ocean current that takes water away from the tropics moves the water to cooler places, where the water cools off.  ESPECIALLY the poles, home of the coldest water on Earth.  ICE even !

To express of an electron we have to figure out the relationship between momentum and wavelength:

λ= [tex]\frac{h}{p}[/tex]  =[tex]\frac{h}{mv}[/tex]

So, velocity of an electron will be:

v= me/λ[tex]e[/tex]h

​h= Planck's constant

[tex]m_{e}[/tex] = mass of the electron

Now we will see what is its value:

V= h/mcλ

[tex]\frac{6.626 .10^{-34}J.s}{(9.109.10^{-31}kg).(100.10^{-12m)} }\\ 7.27.10^{6} m.s^{-1}[/tex]

​Now, to express accelerating potential energy difference we will use kinetic energy and charge of electron

Kinetic energy: [tex]E_{K} =e_{E}[/tex]

But kinetic energy in terms of velocity is

:[tex]\frac{(9.109.10^{-31}kg).(7.27.10^{6}ms^{-1})^{2} }{2.(1.602.10^{-19} C)} \\=150.210^{-31} .10^{-31} .10^{12}.10^{19}V \\ = 1.502.10^{2}V[/tex]

​To know more about kinetic energy visit:

https://brainly.com/question/12669551

#SPJ4

Answer:

1. Atoms are the smallest units of matter.

2. Atoms are composed of protons, electrons, and neutrons.

3. The protons and neutrons are located in the nucleus, and the electrons orbit around the nucleus.

4. The properties of atoms are determined by the number of protons in the nucleus.

Explanation:

Give Brainliest if I helped!

That is speed=  d/t

fast is he speed = 3.7/s

Hence, the boys' acceleration will be 3.785 m/s².

The boys' acceleration will be 3.785 m/s². It is the rate of change of the velocity on the inclined plane. A type of opposition force acting on the surface of the body that tries to oppose the motion of the body. Its unit is Newton(N).

Mathematically, it is defined as the product of the coefficient of friction and normal reaction.

direction. That object's position per unit of time makes it a scalar quantity. The instantaneous speed is the upper limit of the average speed as the duration of the time interval gets closer to zero.  The average speed of an object in a period of time is the distance traveled by the object divided by the duration of the interval The meter per second (m/s) is the metric unit of speed.The next time when you’re in your car on the highway, do just that. What does it say

To learn more about speed refer the link :

brainly.com/question/28224010

#SPJ9

6.21 ×10⁻¹⁹ J  energy of a photon of this wavelength

374028.3 J the energy of a mole of these photons

1) E =hc/λ

=  (6.626×10⁻³⁴×3×10⁸)/(320*10⁹)

= 6.21×10⁻¹⁹ J

2) Of 1 mole E = Avogadro no.*Energy of one photon

= 6.21×10⁻¹⁹×6.023×10²³

= 374028.3 J

3) n×(6.21×10⁻¹⁹) = (10⁻³)

Thus n = 1.61×10¹⁵

How does one find the energy of a photon?

The energy of a photon are often calculated in two ways: If the photon's frequency f is known, we will use the formula E = h f . Planck proposed this equation, which is why it's known as Planck's equation. If the photon's wavelength is understood , the photon's energy are often calculated using the formula E = h c λ

What is the charge of photon?

A photon may be a tiny particle that comprises waves of electromagnetic radiation. As shown by Maxwell, photons are just electric fields traveling through space. Photons haven't any charge, no resting mass, and travel at the speed of sunshine

Learn more about energy of photon :

brainly.com/question/15946945

#SPJ4

By Avogadro's number, the mass is 1.12 x 10¯²⁰ gram.

We need to know about Avogadro's number to solve this problem. Avogadro's number is the number that explains how many atoms are in one mol. The Avogadro's number is

Na =  6,02 × 10²³ atoms / mol

From the question above, we know that

N = 172 atoms

Ar = 39.1

By using Avogadro's number, we can calculate the amount of potassium

N = Na . n

172 = 6,02 × 10²³ . n

n = 2.86 x 10¯²² mol

Find the mass

n = gr / Ar

2.86 x 10¯²² = gr / 39.1

gr = 1.12 x 10¯²⁰ gram

For more on Avogadro's number at: https://brainly.com/question/1581342

#SPJ4

Answer:

B.rate of convection

Explanation:

The absolute value of the price elasticity of demand is 0.46.

What is price elasticity of demand?

The price elasticity of demand is used to determine the quantity sought after for a good. When prices rise, demand declines for almost all products, but some products are more negatively impacted than others. When a price increases by 1% while all other factors remain constant, the price elasticity provides the percentage change in quantity required. A 1% increase in price results in a 2% decrease in demand when the elasticity is negative two. The effects of changes in other parameters on the needed quantity are evaluated by other elasticities (e.g. the income elasticity of demand for consumer income changes).

What does the microeconomic midpoint technique entail?

With the midpoint formula, percentage changes are calculated by dividing the change by the average, or halfway point, between the starting and final values. As a result, the outcome is the same regardless of the direction of the change.

To learn more about price elasticity click on the link below:

https://brainly.com/question/5078326

#SPJ4

Question:

Price Quantity

250 0

200 30

150 70

100 110

50 150

0 190

Using the midpoint method, if the price falls from $100 to $50, the absolute value of the price elasticity of demand is

a. 0.31.

b. 0.46.

c. 1.25.

d. 2.17

It will take 130-140 feet for a tractor-trailer or a truck to stop when going at the same speed.

The stopping distance of a body moving with constant acceleration can be calculated by using the following equation,

v^2 - u^2 = 2as

As the body has stopped, v will be zero.

v^2 - u^2 = 2as

The stopping distance comes out to be

s = u^2/2a

As the stopping distance is proportional to the square of the initial velocity of the body, the mass of the body does not have any effect on the stopping distance.

So, both a car and a tractor-trailer will have the same stopping distance when moving at the same speed.

Therefore, it will take 130-140 feet for a tractor-trailer or a truck to stop when going at the same speed.

To know more about "stopping distance", refer to the following link:

https://brainly.com/question/4726243?referrer=searchResults

#SPJ4

It will take 130-140 feet for a tractor-trailer or a truck to stop when going at the same speed.

The stopping distance of a body moving with constant acceleration can be calculated by using the following equation,

v^2 - u^2 = 2as

As the body has stopped, v will be zero.

v^2 - u^2 = 2as

The stopping distance comes out to be

s = u^2/2a

As the stopping distance is proportional to the square of the initial velocity of the body, the mass of the body does not have any effect on the stopping distance.

So, both a car and a tractor-trailer will have the same stopping distance when moving at the same speed.

Therefore, it will take 130-140 feet for a tractor-trailer or a truck to stop when going at the same speed.

To know more about "stopping distance", refer to the following link:

brainly.com/question/4726243?referrer=searchResults

#SPJ4

The rate of water expressed in ft³/s is: 0.1423 ft³/s

To solve this problem, we have to do the conversion of units with the given information.

Information about the problem:

By Converting the units from (gal/min) to (ft³/s), we get:

rate of water = 63.9 gal/min * 1 ft³/7.481 gal * 1 min/60 s

rate of water =0.1423 ft³/s

It is the transformation of a value expressed in one unit of measurement into an equivalent value expressed in another unit of measurement of the same nature.

Learn more about unit conversion at: brainly.com/question/141163

#SPJ4

The change in the internal energy of the system in kilojoules is 142 kJ.

The internal energy of a system is defined as the sum of work done by a system or work done on a system and heat released by the system or heat gained by a system. Internal energy is represented by the symbol U. It is presented in units of kilojoules.

Work done by the system is W.

W = (-37) kJ

The heat released by the system is U.

U = (-105) kJ

The change in the internal energy of the system in kJ is,

Change in internal energy = Heat + Work done

∆ U = Q + W

∆ U = (-105) + (-37)

∆ U = 142 kJ

Therefore, the change in the internal energy of the system in kilojoules is 142 kJ.

To know more about energy, refer to the below link:

https://brainly.com/question/14689570

#SPJ4