Answer:
0.077M is the concentration of the hydroxyl ion
Explanation:
If 7.35 cm3 of this base is take and diluted to 147 cm3, then what is the concentration of the hydroxyl ion?
Use the dilution equation:
M1V1 = M2V2
M1 * 147cm³ = 1.5 M * 7.35 cm³
M1 = 1.5 M * 7.35 cm³ / 147 cm³
M1 = 0.077 M
0.077M is the concentration of the hydroxyl ionHow many moles of hydroxyl ion are there in the 7.35 cm3?
1000 cm³ contains 1.5 mol OH- ions
7.35 cm³ contains : 7.35 cm³ / 1000 cm³ *1.5 mol
= 0.011025 mol
Answer correct to 2 significant digits = 0.011 mol OH- ions.In the compound Fe2O3, iron's oxidation number is +3, and oxygen's oxidation
number is
Answer here
Answer: The oxygen's oxidation number is -2.
Explanation:
For formation of a neutral ionic compound, the charges on cation and anion must be balanced. The cation is formed by loss of electrons by metals and anions are formed by gain of electrons by non metals.
In [tex]Fe_2O_3[/tex], Fe is having an oxidation state of +3 called as cation and oxygen is an anion with oxidation state of -2. Thus they combine and their oxidation states are exchanged and written in simplest whole number ratios to give neutral [tex]Fe_2O_3[/tex]
The cations and anions being oppositely charged attract each other through strong coloumbic forces and form an ionic bond.
When 1.550 gg of liquid hexane (C6H14)(C6H14) undergoes combustion in a bomb calorimeter, the temperature rises from 25.87 ∘C∘C to 38.13 ∘C∘C. Find ΔErxnΔErxn for the reaction in kJ/molkJ/mol hexane. The heat capacity of the bomb calorimeter, determined in a separate experiment, is 5.73 kJ/∘CkJ/∘C.
Answer:
ΔErxn[tex]= -3.90*10^3KJ[/tex]
Explanation:
Given from the question
T1 = 25.87∘C
T2= 38.13∘C.
C= 5.73Kj/C
CHECK THE ATTACHMENT FOR DETAILED EXPLATION
Each of the insoluble salts below are put into 0.10 M hydrobromic acid solution. Do you expect their solubility to be more, less, or about the same as in a pure water solution ?
a. Calcium sulfite
b. Calcium fluoride
c. Silver bromide
Answer:
A. Solubility of calcium sulfite increases
B. Solubility of calcium fluoride increases
C. Solubility of Silver bromide decreases
Explanation:
The solubility factor is proportional to ions' concentration. The solubility of a solution can be predicted from Le Chatelier's principle which states that if an external constraint is imposed on a system in equilibrium, the equilibrium position will shift in order to annul the effect of the external constraint. So, If the reactant's concentration increases, the equilibrium shifts to the right indicating a higher solubility of the solution and if the product's concentration increases, the equilibrium shifts to the left indicating a lesser solubility of the solution.
Case 1. Calcium sulfite
The dissociation reaction of CaSO3 is given below:
CaSO3 ----> Ca²+ + SO3²-
SO3²- is the conjugate base of the weak acid, H2SO3. Therefore, on the addition of hydrobromic acid, some of the sulfite ion is removed from the solution by the following reaction;
H+ + SO3²- ---> HSO3-
This shifts the equilibrium to the right, more dissociation, thereby resulting in more solubility of the solute.
Case 2. Calcium fluoride
The dissociation reaction of calcium fluoride (CaF2) is shown below.
CaF2 ----> Ca²+ + 2F-
Fluoride ion (F-) is a strong conjugate base of the weak acid. Therefore, some of fluoride ions is removed by the addition of hydrobromic acid as shown below:
H+ + F- ---->. HF
Hence, the concentration of fluoride ions reduces, shifting equilibrium in the forward direction. Therefore, the solubility will be more than in pure water solution.
Case 3: Silver bromide
The dissociation reaction of AgBr is as follows:
AgBr ----> Ag+ + Br-
The addition of HBr will increase the concentration of bromide ions. Hence, equilibrium will shift in backward direction resulting in a lesser solubility than in water.
The solubility of calcium sulfite and calcium fluoride is greater in 0.10 M hydrobromic acid solution than in pure water while the solubility of silver bromide is lesser in 0.10 M hydrobromic acid solution than in pure water.
Common ion effect refers to the decrease in solubility of a substance in a solution that contains another solute with which it has a common ion. If a substance is dissolved in a solution that contains a solute with which it has a common ion, the solubility of the substance in that solution is less than its solubility in pure water.
Considering the substances given, the solubility of calcium sulfite and calcium fluoride in 0.10 M hydrobromic acid solution is more than their solubility in pure water the equilibrium position is shifted in the forward direction.
However, solubility of silver bromide in 0.10 M hydrobromic acid solution is less than its solubility in pure water due to common ion effect.
Learn more: https://brainly.com/question/6505878
Why are sediments carried by wind deposited in a sorted manner? ( that is the largest particles at the bottom and the smallest particles on top)
Answer:
Explanation:
The larger sediment particles are having more weright(mass), hence fall quickly (early) and smaller particles with low mass are carried by wind for longer time and falls slowly , hence you observe sorted kind of things. Hope this helps you to understadn this phenomenon.
What happens in a neutralization reaction?
a
The hydrogen (H+) ions from the base and the hydroxide (OH-) ions from the acld come together to form water.
The hydrogen (H+) ions from the acid and the hydroxide (OH) ions from the base come together to form water.
A substance's pH is increased to a value greater than 7.
A solution of a known concentration and volume is added until the reaction is completed.
Answer:
Answer is letter B
Explanation:
The first one is wrong because acids release H+, not bases.
The third one is wrong because the pH is exactly 7, not greater.
The last one is wrong because it is vague and does not fit a neutralization reaction.
What occurs when potassium reacts with bromine to form potassium bromide?
1) Electrons are shared and the bonding is ionic.
2) Electrons are shared and the bonding is covalent.
3) Electrons are transferred and the bonding is ionic
4) Electrons are transferred and the bonding is covalent.
What are the number of protons, neutrons, and electrons in 19 F
9?
Answer:
This isotope of fluorine has 9 protons, 9 electrons and 10 neutrons.
Explanation:
The aluminum in a package containing 75 ft2 of kitchen foil weighs approximately 12 ounces. Aluminum has a density of 2.70 g/cm3 . What is the approximate thickness of the aluminum foil in millimeters?(1 ounce = 28.4g)
Answer:
18130 mm
Explanation:
Now we have a lot of unit conversions to do in order to correctly answer this question. We shall do these conversions gradually.
First we convert the weight in ounce to grams.
If 1 ounce = 28.4g
12 ounces = 12×28.4 = 340.8 g
Next we convert the area of aluminum from ft2 to m2
1ft2= 0.0929 m2
75 ft2= 75 × 0.0929= 6.9675m2
Now density of aluminum= 2.70 gcm-3
Density= mass/volume
But volume= area× thickness
Density= mass/ area × thickness
Density × area × thickness= mass
Thickness= mass/ density × area
Thickness= 340.8g / 2.70gcm-3 × 6.9675m2
Thickness= 340.8/18.8
Thickness= 18.13 m
Since 1000 milimeters make 1 metre
Thickness= 18130 mm
When you turn on the air conditioner during a hot summer day the cooler air will sink to the floor, while warmer air rises to the
ceiling
Which type of heat transfer is this an example of?
(A) conduction
(B) convection
(C) radiation
(D)
kinetic
what are mineralocorticoids
Explanation:
it is used to describe those action of adrenal corticosteroids that produce sodium
Indicate whether the following represents a Chemical or Physical change: Gasoline burns in air
Answer:
Chemical
Explanation:
Whenever "burns" is being used, most of the time it is a chemical change
Answer:
chemical change
Explanation:
it's a chemical change because when gas burn it produces water and carbon dioxide
Consider the following system at equilibrium: P(aq)+Q(aq)⇌3R(aq) Classify each of the following actions by whether it causes a leftward shift, a rightward shift, or no shift in the direction of the net reaction. Drag the appropriate items to their respective bins.
Items:1) Increase [P]2) Increase [Q]3) Increase [R]4) Decrease [P]5) Decrease [Q]6) Decrease [R]7) Triple [P] and reduce [Q] to one third8) Triple both [Q] and [R]
Explanation:
P(aq)+Q(aq)⇌3R(aq)
This problem involves applying LeChatelier's principle.
LeChatelier's principle states that whenever a system in equilibrium is disturbed, the equilibrium position would change in order to annul that change.
1) Increase [P]
This would cause the equilibrium position to shift to the right. This is because more reactions have been added, to annul that change more products have to be formed.
2) Increase [Q]
This would cause the equilibrium position to shift to the right. This is because more reactions have been added, to annul that change more products have to be formed.
3) Increase [R]
This would cause the equlibrium position to shift to the left. This is because more products have been formed, to annul that change more reactants have to be formed.
4) Decrease [P]
This would cause the equlibrium position to shift to the left. This is because there are now less reactants, to annul that change more reactants have to be formed.
5) Decrease [Q]
This would cause the equilibrium position to shift to the left. This is because there are now less reactants, to annul that change more reactants have to be formed.
6) Decrease [R]
This would cause the equilibrium position to shift to the right. This is because there are now less products, to annul that change more products have to be formed.
7) Triple [P] and reduce [Q] to one third
No shift in the direction of the net reaction because both changes cancels each other.
8) Triple both [Q] and [R]
No shift in the direction of the net reaction because both changes cancels each other.
An ideal gas sealed in a rigid 4.86-L cylinder, initially at pressure Pi=10.90 atm, is cooled until the pressure in the cylinder is Pf=1.24 atm. What is the enthalpy change for this process? ΔH =
Answer:
[tex]\Delta H=-11897J[/tex]
Explanation:
Hello,
In this case, it is widely known that for isochoric processes, the change in the enthalpy is computed by:
[tex]\Delta H=\Delta U+V\Delta P[/tex]
Whereas the change in the internal energy is computed by:
[tex]\Delta U=nCv\Delta T[/tex]
So we compute the initial and final temperatures for one mole of the ideal gas:
[tex]T_1= \frac{P_1V}{nR}=\frac{10.90atm*4.86L}{0.082*n}=\frac{646.02K }{n} \\\\T_2= \frac{P_2V}{nR}=\frac{1.24atm*4.86L}{0.082*n}=\frac{73.49K }{n}[/tex]
Next, the change in the internal energy, since the volume-constant specific heat could be assumed as ³/₂R:
[tex]\Delta U=1mol*\frac{3}{2} (8.314\frac{J}{mol*K} )*(73.49K-646.02K )=-7140J[/tex]
Then, the volume-pressure product in Joules:
[tex]V\Delta P=4.86L*\frac{1m^3}{1000L} *(1.24atm-10.90atm)*\frac{101325Pa}{1atm} \\\\V\Delta P=-4756.96J[/tex]
Finally, the change in the enthalpy for the process:
[tex]\Delta H=-7140J-4757J\\\\\Delta H=-11897J[/tex]
Best regards.
The change in enthalpy is 70.42J
Data;
Volume of the gas = 4.86LInitial Pressure = 10.90 atmFinal Pressure = 1.24 atmChange in Enthalpy = ?Change in EnthalpyThe change of enthalpy is calculated as
[tex]\delta H = \delta V + \delta nRT\\\delta n = 0\\\delta H = \delta U \\[/tex]
The volume change is negligible
The change in enthalpy here is equal to change in internal energy over ΔE
[tex]\delta H = \delta U = nCv\delta T\\\delta H = \frac{3}{2}(nR\delta T)\\\delta H = \frac{3}{2}\{\delta PV)\\ \delta H = \frac{3}{2}[(10.90-1.24)*4.86] \\\delta H = 70.42J[/tex]
The change in enthalpy is 70.42J
Learn more on change in enthalpy here;
https://brainly.com/question/14047927
A salt solution was found to contain 1.50 g of salt dissolved in 50 mL of water. On evaporation, the recovered salt weighed 1.47 g. What percent of salt was recovered?
A) 20.4%
B) 107%
C) 98%
D) 20.0%
Answer:
C = 98%
Explanation:
Hello,
To determine the percentage of salt recovered, we'll divide the mass of the salt recovered over by the original mass of the salt.
Mass of salt recovered = 1.47g
Initial mass of salt = 1.50g
Percentage of salt recovered = (mass recovered/ initial mass of salt) × 100
Percentage of salt recovered = (1.47 / 1.50) × 100
Percentage of salt recovered = 0.98 × 100
Percentage of salt recovered = 98%
The percentage of salt recovered is equal to 98%
An ideal gaseous reaction occurs at a constant pressure of 35.0 atm and releases 66.8 kJ of heat. Before the reaction, the volume of the system was 8.20 L. After the reaction, the volume of the system was 2.21 L. Calculate the total change in internal energy for the system. Enter your answer numerically in units of kJ.
Answer:
U = -45.557kj
Explanation:
Before we can calculate the totally internal energy change in kilojoules firstly we need to calculate W
U=q + w .
We know that
w = PΔ V
where P is the pressure of
and V is the volume
then we can calculate the work
w = 35 atm * ( 8.20L - 2.21L)
W=35atm* 5.99L
W=209.65atmJ
But 1 atm = 101.325J
then ,
w = 209.65* 101.325 J = 21242.79 J
let us convert it to Kj
But we know that 1kJ = 10^3 J .
Then w = 21.243 kJ .
Then we can now calculate the internal energy as
U = 21.243- 66.8 kJ = -45.557kj
But we know that heat was released. Theeefore, the total internal energy change was -45.557kj
A galvanic cell at a temperature of 25.0°C is powered by the following redox reaction:
2MnO4^-(aq)+16H+(aq)+5Pb(s)-->2Mn^2+(aq)+8H2O(l)+5Pb^2+(aq)
Suppose the cell is prepared with 1.87 M MnO−4 and 1.37 M H+ in one half-cell and 3.23 M Mn+2 and 6.62 M Pb+2 in the other. Calculate the cell voltage under these conditions. Round your answer to 3 significant digits.
Answer:
1.63 V
Explanation:
Let us state the reaction equation again for the purpose of clarity;
2MnO4^-(aq)+16H+(aq)+5Pb(s)-->2Mn^2+(aq)+8H2O(l)+5Pb^2+(aq)
The reduction potentials for the two half reaction equations are;
MnO 4 - (aq) + 8H + (aq) + 5e - → Mn2+(aq) + 4H2O(l) Eo=1.51 V
Pb2+(aq) + 2e - → Pb(s) Eo= -0.13 V
E°cell = E°red – E°Ox
E°cell = 1.51 - (-0.13)
E°cell = 1.51 + 0.13
E°cell = 1.64 V
But Q= [Mn^2+]^2 [Pb^2+]^5/[MnO4^-]^2 [H^+]^16
Q= [3.23]^2 [6.62]^5/[1.87]^2 [1.37]^16
Q= 10.43 × 12714.22/3.4969 × 154
Q= 132609.3/538.5226
Q= 246.25
From Nernst equation
E= E° - 0.0592/n log Q
Where n=10
E= 1.64- 0.0592/10 log 246.25
E= 1.64-0.0142
E= 1.63 V
How many kg of gas fill a 11.6 gal gas tank
Answer:
43.964
Explanation:
i think i used a calculator so let me know if its wrong
Answer:
39.49 kg
Explanation:
:)
Calculate the number of moles of magnesium, chlorine, and oxygen atoms in 4.90 moles of magnesium perchlorate, Mg(ClO4)2.]\
Answer:
4.90 moles of [tex]Mg(ClO_4)_2[/tex] will produce (9.8) moles of [tex]Cl^{-}[/tex] ,
(4.90) moles of [tex]Mg^{2+}[/tex] and
(39.2) moles of [tex]O^{2-}[/tex]
Explanation:
From the question we are told that
The number of moles of is [tex]n = 4.90 \ mols[/tex]
The formation reaction of [tex]Mg(ClO_4)_2[/tex] is
[tex]Mg^{2+} + 2 Cl^{-} + 8O^{2+} \to Mg(ClO_4)_2[/tex]
From the reaction we see that
1 mole of [tex]Mg(ClO_4)_2[/tex] is formed by 2 moles of [tex]Cl^{-}[/tex] 1 mole of [tex]Mg^{2+}[/tex] and 4 [tex]O^{2-}[/tex]
This implies that
4.90 moles of [tex]Mg(ClO_4)_2[/tex] will produce (2 * 4.90) moles of [tex]Cl^{-}[/tex] ,
(1 * 4.90) moles of [tex]Mg^{2+}[/tex] and
(8 * 4.90) moles of [tex]O^{2-}[/tex]
So
4.90 moles of [tex]Mg(ClO_4)_2[/tex] will produce (9.8) moles of [tex]Cl^{-}[/tex] ,
(4.90) moles of [tex]Mg^{2+}[/tex] and
(39.2) moles of [tex]O^{2-}[/tex]
Answer:
- [tex]n_{Mg}=4.90molMg[/tex]
- [tex]n_{Cl}=9.6molCl[/tex]
- [tex]n_{O}=38.4molO[/tex]
Explanation:
Hello,
In this case, for the given 4.90 moles of magnesium perchlorate, we can compute the moles of each atom by identifying the subscript each atom has in the molecule as shown below:
- Moles of magnesium atoms: here, one mole of magnesium perchlorate has only one mole of magnesium atom (subscript is one), this the moles of magnesium atoms are also 4.90 moles.
- Moles of chlorine atoms: here, one mole of magnesium perchlorate has two moles of chlorine atoms as it has a two out of the parenthesis enclosing the perchlorate anion, thus, we have:
[tex]n_{Cl}=4.80molMg(ClO_4)_2*\frac{2molCl}{1molMg(ClO_4)_2} =9.6molCl[/tex]
- Moles of oxygen atoms: here, one mole of magnesium perchlorate has eight moles of oxygen atoms as it has a four in the oxygen subscript and a two out of the parenthesis enclosing the perchlorate anion, thus, we have:
[tex]n_{O}=4.80molMg(ClO_4)_2*\frac{8molO}{1molMg(ClO_4)_2} =38.4molO[/tex]
Best regards.
A 25.0 mLsample of an acetic acid solution is titrated with a 0.175 M NaOH solution. The equivalence point is reached when 37.5 mL of the base is added. The concentration of acetic acid in the sample was:_______,
A) 0.263
B) 0.365
C) 0.175
D) 1.83×10−4
E) 0.119
Answer:
0.263M of CH₃COOH is the concentration of the solution.
Explanation:
The reaction of acetic acid (CH₃COOH) with NaOH is:
CH₃COOH + NaOH → CH₃COO⁻Na⁺ + H₂O
1 mole of acetic acid reacts per mole of NaOH to produce sodium acetate and water.
In the equivalence point, moles of acetic acid are equal to moles of NaOH and moles of NaOH are:
0.0375L × (0.175 moles / L) = 6.56x10⁻³ moles of NaOH = moles of CH₃COOH.
As the sample of acetic acid had a volume of 25.0mL = 0.025L:
6.56x10⁻³ moles of CH₃COOH / 0.0250L =
0.263M of CH₃COOH is the concentration of the solution
Hydrocarbon X has the formula C6H12. X reacts with one molar equivalent of hydrogen in the presence of a palladium catalyst to form a product having 12 primary hydrogens. Treatment of X with ozone followed by zinc in aqueous acid gives a mixture two aldehydes. What is the structure of X
Answer:
Explanation:
X( C₆H₁₂ )= (CH₃)₃-C-CH=CH₂
(CH₃)₃-C-CH=CH₂ + H₂ = (CH₃)₃-C-CH₂-CH₃ ( 12 primary hydrogen bonds )
(CH₃)₃-C-CH=CH₂ + O₃ = (CH₃)₃-C-CH= O + HCHO
Draw the Lewis structure of H2O. Include any nonbonding electron pairs. Draw the molecule by placing atoms on the grid and connecting them with bonds. Include all lone pairs of electrons. - CHONSPFBrClIXMore Request Answer Part B What is the electron geometry of H2O
Answer:
Concepts and reason
Lewis structure is a structure that explains the bonding between atoms of a molecule and lone pair of electrons that is present in the molecule is called a Lewis structure.
With the help of Lewis structure the electronic geometry of a molecule can be determine.
Fundamentals
According to Lewis structure, every atom and their position in the structure of a molecule by using its chemical symbol.
Lines connecting the atoms that are bonded to them are drawn. Lone pairs are expressed by pairs of dots and are located beside the atoms.
Lewis structure of [tex]H_{2}O[/tex] is, the total number of valence electrons is eight in [tex]H_{2}O[/tex].
What is the balanced form of the chemical equation shown below?
Na2SO4(aq) + Sr(NO3)2(aq) → SrSO4(s) + NaNO3(aq)
A. Na2SO4(aq) + Sr(NO3)2(aq)
SISO4(s) + NaNO3(aq)
B. NaSO4(aq) + SINO3(aq) → SSO4(s) + NaNO3(aq)
C. Na2SO4(aq) → SrSO4(s) + 2NaNO3(aq)
Ο Ο
D. Na2SO4(aq) + 2Sr(NO3)2(aq) → 2SSO4(s) + 2NaNO3(aq)
Answer:
C. Na₂SO₄(aq) + Sr(NO₃)₂(aq) → SrSO₄(s) + 2 NaNO₃(aq)
Explanation:
Based on the equation:
Na₂SO₄(aq) + Sr(NO₃)₂(aq) → SrSO₄(s) + NaNO₃(aq)
As you can see, sulfate ions (SO₄) are been replaced for nitrate ions (NO₃). That is a double replacement reaction and is a very important information because 2 NO₃ ions in Sr(NO₃)₂ are producing 1 NO₃ ion. To balance NO₃:
Na₂SO₄(aq) + Sr(NO₃)₂(aq) → SrSO₄(s) + 2 NaNO₃(aq)
1 SO₄ ion in Na₂SO₄ produce 1 SO₄ ion in SrSO₄. And Na and Sr metals are balanced yet. Thus, the balanced form of this chemical equation is:
Na₂SO₄(aq) + Sr(NO₃)₂(aq) → SrSO₄(s) + 2 NaNO₃(aq)What is the name of this molecule? (will give BRAINLIEST)
A straight chain of four carbons. There is a triple bond between the second and third carbons when counting from left to right or right to left.
Answer:
2 - Butyne
Explanation:
The name of the molecule with a carbon atoms arranged in a straight chain with a triple bond between the second and third carbons is 2 - Butyne.
2- Butyne is an alkyne with structural formula given below. Some of the properties of Butyne include it is a produced artificially, it is volatile and colorless in nature.
Hence, the given molecules described is 2 - Butyne.
Two scientists study data collected during an experiment and reach different conclusions. How would the scientific community address their disagreement?
Please
Answer: D. They would device an experiment that could test the two scientists conclusions.
Explanation:
The results of the scientific study must be verified by peer scientists or members of the scientific community to proof whether the research has been conducted produce a valid evidence.
In the given situation, the two scientists had developed different conclusion for the same experiment. This may mean either of the two may have put up an incorrect conclusion.
The scientific community may address this issue by performing the experiment. Every scientific conclusion is based upon the results of the experimental approach.
Answer:d
Explanation:
Question 5 of 20:
Select the best answer for the question.
5. Which of the following is a homonuclear diatomic molecule?
O A. NH3
O B. 2002
O C. Hz
O D. CO
Answer:
Homo nuclear molecule mean having atoms of only one element,
I cant see clearly the option B and C can you correct them , 2002? Hz?
Explanation:
Answer:
H2
Explanation:
A researcher placed 25.0 g of silver chloride, AgCl, in sunlight and allowed the substance to decompose completely to form silver, Ag, with the release of chlorine gas, Cl2. The gas was collected in a container during the decomposition. The researcher determined that the mass of the silver formed was 18.8 g, and the mass of the chlorine gas formed was 6.2 g. The equation for the reaction is:
Answer:
A. The law of definite proportions states that all pure samples of a particular chemical compound contain the same elements combines in the same proportion by mass.
B. The law of conservation of mass states that during ordinary chemical reactions, matter can neither be created or destroyed.
Note: The full question is as follows;
A researcher placed 25.0 g of silver chloride, AgCl, in sunlight and allowed the substance to decompose completely to form silver, Ag, with the release of chlorine gas, Cl2. The gas was collected in a container during the decomposition. The researcher determined that the mass of the silver formed was 18.8 g, and the mass of the chlorine gas formed was 6.2 g. The equation for the reaction is:
2AgCl ----> 2Ag + Cl2
a. State the law of definite proportions. Then use the researcher's data to confirm the law of definite proportions. Show your calculations.
b. State the law of conservation of matter. Then use the researcher's data to confirm the conservation of matter. Show your calculations.
Explanation:
A. Mass of silver obtained from AgCl = 18.8g.
Percentage mass of silver in the chloride = (18.8/25.0) * 100 = 75.2 %
Mass of chlorine obtained from AgCl = 6.2
Percentage mass of chlorine = (6.2/25) * 100 = 24.8 %
In one mole of AgCl with a molar mass of 143.3 g/mol; mass of silver = 107.8, mass of Cl = 35.5
Percentage mass of Ag = (107.8/143.3) * 100 = 75.2%
Percentage mass of Cl = (35.5/143.3) * 100 = 24.8%
Since the percentages by mass of Ag and AgCl obtained from the sample is the same to that obtained from a mole of AgCl, the law of definite proportions which states that all pure samples of a particular chemical compound contain the same elements combined in the same proportion by mass is verified.
B. Mass of reactant; AgCl sample = 25.0
Mass of products; At = 18.8 g; Cl = 6.2 g
Sum of products masses = 18.8 + 6.2 = 25.0 g
Therefore mass of reactant = mass of products.
This is in accordance with the law of conservation of mass which states that during ordinary chemical reactions, matter is neither created nor destroyed.
4.The reaction of 0.25 g magnesium with 100.0 mL of 2 M hydrochloric acid (density d = 1.039 g/ml) raises the temperature of the solution from 20.0 °C to 35.0 °C. The specific heat for HCl is 3.98 J/(g.C). Mg(s) + 2HCl(aq) —> MgCl2(aq) + H2(g) Calculate the heat of the reaction. (Use the equation Q = s . m .ΔT where s is the specific heat, m is the mass of solution and ΔT is the change in temperature)
Answer:
[tex]Q=450.14J[/tex]
Explanation:
Hello,
In this case, for the given equation to compute the heat, we should compute the mass of the solution of hydrochloric acid, thus, the first step is to compute its reacting mass:
[tex]m_{HCl}^{reacting}=2\frac{mol}{L}*0.1000L *\frac{36.45g}{1mol}=7.29g[/tex]
Then, we obtain the total mass of the formed solution:
[tex]m=0.25g+7.29g=7.54g[/tex]
In such a way, we can infer that the specific heat of the solution is mainly the specific heat of hydrochloric acid, therefore the heat turns out:
[tex]Q=3.98\frac{J}{g\°C} *7.54g*(35.0\°C-20.0\°C)\\\\Q=450.14J[/tex]
Regards.
The following data show the rate constant of a reaction measured at several different temperatures. Temperature (K) Rate Constant (1/s) 310 0.194 320 0.554 330 1.48 340 3.74 350 8.97 Part APart complete Use an Arrhenius plot to determine the activation barrier for the reaction. Express your answer using three significant figures. Ea
Complete Question
The complete question is shown on the first uploaded image
Answer:
Part A
activation barrier for the reaction [tex]E_a = 84 .0 \ KJ/mol[/tex]
Part B
The frequency plot is [tex]A = 2.4*10^{13} s^{-1}[/tex]
Explanation:
From the question we are told that
at [tex]T_1 = 300 \ K[/tex] [tex]k_1 = 5.70 *10^{-2}[/tex]
and at [tex]T_2 = 310 \ K[/tex] [tex]k_2 = 0.169[/tex]
The Arrhenius plot is mathematically represented as
[tex]ln [\frac{k_2}{k_1} ] = \frac{E_a}{R} [\frac{1}{T_1} - \frac{1}{T_2} ][/tex]
Where [tex]E_a[/tex] is the activation barrier for the reaction
R is the gas constant with a value of [tex]R = 8.314*10^{-3} KJ/mol \cdot K[/tex]
Substituting values
[tex]ln [\frac{0.169}{6*10^-2{}} ] = \frac{E_a}{8.314*10^{-3}} [\frac{1}{300} - \frac{1}{310} ][/tex]
=> [tex]E_a = 84 .0 \ KJ/mol[/tex]
The Arrhenius plot can also be mathematically represented as
[tex]k = A * e^{-\frac{E_a}{RT} }[/tex]
Here we can use any value of k from the data table with there corresponding temperature let take [tex]k_2 \ and \ T_2[/tex]
So substituting values
[tex]0.169 = A e ^{- \frac{84.0}{8.314*10^{-3} * 310} }[/tex]
=> [tex]A = 2.4*10^{13} s^{-1}[/tex]
Which process absorbs the greatest amount of heat?
a. the cooling of 10 g of liquid water from 100°C to 0°C.
b. the heating of 10 g of liquid water from 0°C to 100°C.
c. the freezing of 10 g of liquid water the melting of 10 g of ice.
d. the condensation of 10 g of gaseous water.
Answer:
b. the heating of 10 g of liquid water from 0°C to 100°C.
Explanation:
Hello,
In this case, we must notice a., c. and d. processes are not actually absorbing heat but releasing it since cooling, freezing and condensation are processes with negative heat sign since matter changes from a state of more energy to a state of less energy. We can prove this by realizing that freezing enthalpy of water is -6.00 kJ/mol, condensation enthalpy of eater is -40.8 kJ/mol and a change of temperature from 100 °C to 0 °C is negative.
In such a way, the only process absorbing heat is b. the heating of 10 g of liquid water from 0°C to 100°C since energy must be added to the system, or absorbed by it in order to attain the heating.
Regards.
The process having the greatest amount of heat is:
b. the heating of 10 g of liquid water from 0°C to 100°C.
Looking at all the options:The options a., c. and d. processes are not actually absorbing heat but releasing it since cooling, freezing and condensation are processes with negative heat sign since matter changes from a state of more energy to a state of less energy.
The freezing enthalpy of water is -6.00 kJ/mol, condensation enthalpy of eater is -40.8 kJ/mol and a change of temperature from 100 °C to 0 °C is negative.
So out of all the options, only process at b is a heating process thus it will absorb greatest amount of heat.
Find more information about Heat here:
brainly.com/question/13439286
What is the equilibrium constant for the following reaction:HCO2H(aq) + CN–(aq) HCO2–(aq) + HCN(aq)Does the reaction favor the formation of reactants or products? The acid dissociation constant, Ka, for HCO2H is 1.8 x 10–4and the acid dissociation constant for HCN is 4.0 x 10–10.(A) K = 1.00. The reaction favors neither the formation of reactants nor products.(B) K = 2.2 x 10–6. The reaction favors the formation of products.(C) K = 2.2 x 10–6. The reaction favors the formation of reactants.(D) K = 4.5 x 105. The reaction favors the formation of products.(E) K = 4.5 x 105. The reaction favors the formation of reactants.
Answer:
(D) K = 4.5 x 10⁵. The reaction favors the formation of products
Explanation:
HCOOH + CN⁻ ⇆ HCOO⁻ + HCN
K = [HCOO⁻] [ HCN ] / [ HCOOH] [ CN⁻]
HCOOH ⇄ H ⁺ + COO⁻
K₁ = [ H⁺] [ COO⁻ ] / [HCOOH ]
HCN ⇆ H⁺ + CN⁻
K₂ = [ H⁺] [ CN⁻] / [ HCN ]
K₁ / K₂
= [ H⁺] [ COO⁻ ] / [HCOOH ] X [ HCN ] / [ H⁺] [ CN⁻]
= [ COO⁻ ][ HCN ] / [HCOOH ] [ CN⁻]
= K
K = K₁ / K₂
= 1.8 x 10⁻⁴ / 4 x 10⁻¹⁰
= 4.5 x 10⁵
So equilibrium constant of the reaction
HCOOH + CN⁻ ⇆ HCOO⁻ + HCN
is very high . Hence reaction favours the formation of product.
option (D) is correct.
