Now the force equation at point A is given as f (n)= 0.05N
What height must the bead be launched from in order for it to complete the loop, minimum height h?h < (1/2)R.This means that the ball must start at a height that is at least half a radius above the top of the loop, or 2.5 radii above the ground, in order to travel around the entire circle.
v = 12.45m/s
Part B)
F(n) = 0.05N
As we know that the point A lies on the top of the loop
so we will have by energy conservation
so the speed at point A is given as
mg (H-2R) = 1/2 mv ²
v = √2 g (H-2R)
V= 12.45 m/s
Now the force equation at point A is given as
F (n)= 0.05N
To learn more about force equation refer
https://brainly.com/question/13833748
#SPJ4
you are swinging a block of mass 10 kg around in a horizontal plane at a speed of 10 m/s, holding a massless string of length 2m. neglecting gravity, the force you exert on the string is
The force you exert on the string is 500 N. This force is calculated by centripetal force.
what is a centripetal force?Any force that changes the direction of motion toward the center of a circular motion is known as a centripetal force. The part of the force that produces the centripetal force is the part that is perpendicular to the velocity.
Is the force of gravity centripetal?Centripetal force is used to maintain an object moving in a circle due to gravity. Since gravity always works perpendicularly to the does not affect velocity, it has no effect on an object in a circular orbit.
Does centrifugal force really exist?It is untrue to say that there is a centrifugal force. It is presumable that its existence is limited to providing an explanation for observations made from the perspective of an observer who moves in a circular motion alongside the item under observation.
Given:
Mass (m) = 10 kg
Velocity (v) = 10m/s
Radius (r) =2 m
F = m*v^2/r
[tex]F= \frac{10(10)^2}{2}[/tex]
[tex]F=500N[/tex]
To know more about force visit:
https://brainly.com/question/898360
#SPJ4
A bullet of mass mb is fired horizontally with speed vi at a wooden block of mass mw resting on a frictionless table. The bullet hits the block and becomes completely embedded within it. After the bullet has come to rest. Part A Which of the following best describes this collision? perfectly elastic partially inelastic perfectly inelastic Part B Which of the following quantities, if any, are conserved during this collision? kinetic energy only momentum only kinetic energy and momentum neither momentum nor kinetic energy. Part C:
What is the speed of the block/bullet system after the collision?
Express your answer in terms of vi , mw , and mb . vf = ?
Both kinetic energy and momentum is conserved in this hit since it is perfectly elastic. Vf = mV + M0 = (m + M)v is the speed of the block/bullet system after the contact.
In physics, an elastic collision is a collision between two bodies in which the total kinetic energy remains constant. In an ideal, elastic collision, there is no net conversion of kinetic energy into heat, noise, or potential energy. In physics, kinetic energy (KE) is the energy that an object has as a result of its motion. Both kinetic energy and momentum are conserved in this hit since it is completely inelastic. Vf = mV + M0 = (m + M)v is the speed of the block/bullet system after the contact. It is defined as the effort necessary to move a mass-based body from rest to the given velocity. in kinematics and everyday usage.
Learn more about kinetic energy here
https://brainly.com/question/26472013
#SPJ4
Consider four 100.0-g samples of water, each in a separate beaker at 25.0∘C. Into each beaker, you drop 10.0 g of a different metal that has been heated to 95.0∘C. Assuming no heat loss to the surroundings, which water sample will have the highest final temperature? Explain your answer.
a. The water to which you have added aluminum (c=0.89J/g∘C).
b. The water to which you have added iron (c=0.45J/g∘C).
c. The water to which you have added copper (c=0.20J/g∘C).
d. The water to which you have added lead (c=0.14J/g∘C).
e. Because the masses of the metals are the same, the final temperatures would be the same.
Water sample will have the highest final temperature because the masses of the metals are the same, the final temperatures would be the same.
Heat
Heat flows from hot bodies to cold bodies. When two bodies with different temperatures come into contact with each other, heat transfer occurs and thermal equilibrium is achieved. Thermal equilibrium can only be achieved when a cold object raises its temperature and a hot object lowers its temperature.
The formula for calculating the amount of heat absorbed by a metal is:
heat absorbed by metal = m × Cp × ΔT
where:
m = mass of metal
Cp = specific heat or heat capacity of metal
ΔT = Temperature change of metal, difference between final and initial temperature
Learn more about Temperature:
https://brainly.com/question/17712868
#SPJ4
Suppose you are standing on the center of a merry-go-round that is at rest. You are holding a spinning bicycle wheel over your head so that its rotation axis is pointing upward. The wheel is rotating counterclockwise when observed from above.
For this problem, neglect any air resistance or friction between the merry-go-round and its foundation.
Part A Suppose you now grab the edge of the wheel with your hand, stopping it from spinning.
Part A.1 Part not displayed
What happens to the merry-go-round?
ANSWER: It remains at rest.
It begins to rotate counterclockwise (as observed from above).
It begins to rotate clockwise (as observed from above).
(B) is correct → It begins to rotate counter clockwise (as observed from above) if we have to stop the wheel from spinning it counterclockwise,
What does the word "counterclockwise" mean?CCW motion can be seen in the turning of taps, putting a lock in a key to lock it, and disassembling a screw, for example. To make counterclockwise motion clear to young students, use the letter C as an illustration exert From a we must clockwise torque to stop it. 3rd law of Newton, wheel exerts a counter clockwise torque on US.
Due to Conservation of momentum, it begins to dotale counter clock wise. Note that, angular momentum will get transferred from wheel to the merry-go-around"
Which direction—counter clockwise or clockwise—is proper
Result for counter clockwise in an image
The clock's hands go from top to bottom, then down and towards the left, and officially back to the center in clockwise motion, which is abbreviated as CW. In Commonwealth, the opposite of rotating or revolution is.
To know more about rotating visit:
brainly.com/question/29971286
#SPJ4
The correct question is:
10) Suppose you are standing on the center of a merry-go-round that is at rest. You are holding a spinning bicycle wheel over your head so that its rotation axis is pointing upward. The wheel is rotating counterclockwise when observed from above.
For this problem, neglect any air resistance or friction between the merry-go-round and its foundation.
Suppose you now grab the edge of the wheel with your hand, stopping it from spinning. What happens to the merry-go- round?
A) it remains at rest.
B) it begins to rotate counterclockwise (as observed from above).
C) it begins to rotate clockwise (as observed from above).
D) Cannot be determined from the information given.
Meters in which each beat is subdivided into three rather than two are known as:a. simple meters. b. complex meters.c. compound meters.d. unequal meters.
There are three eighth notes within each beat, which has the same length as a dotted quarter note. Compound meter's are ones that have the beat divided into thirds, like this one.
The correct option is C.
What kind of rhythm is separated into two beats?Duple meter's are those that have two beats per measure. When a bar contains three beats, the meter's is said to be triple, and when a bar contains four beats, the meter's is said to be quadruple. The meter's is referred to as simple if the beats are typically broken up into two pieces.
what are Compound meter's ?Compound meter's are those in which the beat is divided first into three and then into six. Duple meter's group a variety of Quadruple meter's have groups of four beats, triple meter's have groups of three beats, and double meter's have groups of two beats.
To know more about Compound meter's visit:
https://brainly.com/question/3044590
#SPJ4
Hot coffee is poured into a mug. It slowly cools, releasing heat to the environment. If we consider the coffee to be the system, which of the following are part of the surroundings? Select all that apply.
O The table underneath the mug O The mug O The air in the room
If we consider the coffee to be the system, the mug, the air in the room, and the table underneath the mug are the part of the surroundings.
What is heat?Heat is the transfer of kinetic energy from an energy source to a medium or an object, or the opposite. The three potential mechanisms for this energy transfer are radiation, conduction, and convection.
Small particles are always moving in gases, liquids, and solids. A type of energy known as thermal energy is created by the motion of particles and is a part of all matter.
Between systems or objects with various temperatures, energy is transferred in the form of heat (flowing from the high-temperature system to the low-temperature system). Likewise called thermal energy or heat energy.
To know more about heat visit:
https://brainly.com/question/8348313
#SPJ4
a ball is thrown and follows the parabolic path shown. point q is the highest point on the path and points p and r are the same height above the ground.
Because of freefall, The only acceleration working on the ball is gravity in the parabolic path shown. Thus, Option C is correct.
What is parabolic path?Parabolic motion is a type of projectile motion in which an object is thrown or projected into the air and follows a curved path due to the influence of gravity.
In the case of the diagram, the ball is thrown upwards and follows a parabolic path. Point Q marks the highest point on the path and points P and R are the same height above the ground. This can be explained by the fact that the initial velocity of the ball is insufficient to reach a higher point than Q, so after reaching Q the ball begins to fall back to the ground, travelling the same distance at P and R before it reaches the ground.
The parabolic motion of the ball can be described by the equation s = u ×t + 0.5 × a × t2, where s is the displacement of the ball, u is the initial velocity, t is the time elapsed, and a is the acceleration due to gravity. This equation can also be used to calculate the maximum height that the ball will reach, in this case point Q.
The parabolic motion of the ball can be used to explain the physics behind a variety of scenarios, such as how a ball thrown into the air will move, how a skydiver will fall, and even how a spacecraft can be propelled into outer space. It is a fundamental concept in physics and understanding it can help to explain many of the phenomena we observe in our everyday lives.
To know more about parabolic path click-
brainly.com/question/28687429
#SPJ4
Full question:
(See attachment))
24 (refer to figures 32, 33.) which action can adjust the airplane's weight to maximum gross weight and the cg within limits for takeoff? front seat occupants 425 lb rear seat occupants 300 lb fuel, main tanks 44 gal
9 gallons of fuel can be drained to bring the aircraft's weight and CG into safe ranges for takeoff.
What is maximum gross weight?The maximum weight at which the pilot is permitted to attempt to take off due to structural or other limitations is known as the maximum takeoff weight, maximum gross takeoff weight, or maximum takeoff mass of an aircraft. Gross lift-off mass, or GLOW, is the equivalent phrase for rockets. The maximum weight of a vehicle or trailer, including the maximum load that can be carried while being used on the road, is referred to as the maximum authorised mass (MAM) in the context of driving licenses. This is also referred to as the maximum weight permitted or the gross vehicle weight (GVW).
Here,
The aircraft's weight can be adjusted to its maximum gross weight and its CG can be kept within safe ranges for takeoff by draining 9 gallons of fuel.
To know more about maximum gross weight,
https://brainly.com/question/13973823
#SPJ4
The voltage and current at the terminals of the circuit element in Fig 1.5 are zero for t < 0. For f0 , they are v = 80,000f 0; i = 15te-5QQt A, t > 0.a) Find the time when the power delivered to the circuit element is maximum. b) Find the maximum value of power. c) Find the total energy delivered to the circuit element.
Time when the power delivered to the circuit element is maximum is [tex]t = ln(80,000f0/75) / (-5)[/tex]), B) The maximum value of power [tex]12f0 A[/tex],C)The total energy delivered to the circuit element is [tex]E = ∫ P dt = ∫ (80,000f0 x 15te^-5t) dt = 12f0 x (1/e^5) x (1-e^-5t)[/tex]
What is the total energy and maximum value of power delivered to the circuit?
a) To find the time when the power delivered to the circuit element is maximum, we need to find the time when the product of voltage and current is maximum.
Power = voltage x current = [tex]80,000f0 x 15te^-5t A[/tex]
The power will be maximum when the derivative of Power with respect to time is zero.
[tex]dP/dt = 0 = 80,000f0 x 15e^-5t - 75e^-5t A[/tex]
[tex]t = ln(80,000f0/75) / (-5)[/tex]
b) To find the maximum value of power, we can substitute the value of t in the equation of power.
[tex]P = 80,000f0 x 15e^-5(ln(80,000f0/75) / (-5)) A = 12f0 A[/tex]
c) To find the total energy delivered to the circuit element, we can integrate the power with respect to time.
[tex]E = ∫ P dt = ∫ (80,000f0 x 15te^-5t) dt = 12f0 x (1/e^5) x (1-e^-5t)[/tex]
The total energy delivered to the circuit element is[tex]12f0/e^5[/tex]
It's worth noting that this solution assumes that the circuit element is a linear element that follows Ohm's law and Kirchhoff's laws. If the circuit element is nonlinear this solution may not be valid.
To learn more about voltage refer:
https://brainly.com/question/13521443
#SPJ4
A woman carries a pitcher of water across a level surface with a constant speed. assume the pitcher has a mass of 10 gk and the woman walks 65 m. How much work has the girl done?
Work is the energy that is transferred when a force is applied to a moving object. the girl done 650.
What is work?The energy transfer, Work is the energy that is transferred when a force is applied to a moving object. The amount of force multiplied by the amount of displacement multiplied by the cosine of the angle between them results in the work that a force produces on an item.Work is defined as the energy that is applied to or removed from an item by applying force along a displacement. For a constant force acting in the same direction as the motion, the work is simply equal to the product of the force's magnitude and the distance traveled.Work = Force X displacement
so,
10 * 65m.
650
To learn more about Work refer to:
https://brainly.com/question/14813637
#SPJ4
given that the moon subtends at an angle of about half a degree in the sky, estimate its distance from earth
Distance of moon from the earth will be around 384,400 Kilometers (239,000 miles) .
Elaborate in detail.The angular size of the Moon in the sky, which is around half a degree, can be used to determine the distance to the Moon. With this knowledge and knowledge that the Moon's diameter is approximately 3,476 kilometers, we can apply the following formula to determine the angular size: Distance equals (Angular size / 2) tan((Moon diameter / 2)). This gives us a measurement of 384,400 kilometers (239,000 miles) as the distance between Earth and the Moon.
It's crucial to keep in mind that this is only an estimate, and the distance could change based on where the Moon is in its orbit around the Earth. It's also important to note that this distance is an average and that it varies over the month as a result of the Moon's eccentric orbit.
Learn more about Friction here
https://brainly.com/question/13000653
#SPJ4
six forces, each of magnitude either f or 2f, are applied to a door as seen from above in the (figure 1).
The fifth torque (T₅ ) is the largest then the third torque (T₃), after the third torque, the second and fourth torque (T₂) and (T₄), then the smallest torque is (T₆).
In terms of physics, torque is a rotating or twisting force that propels an item around an axis. Understanding torque, which is comparable to force in linear motion, is essential for comprehending rotating motion.
The torque for the first side is:
T₁ = 2FL/4 = 0.5FL
The second and fourth torque are equal in magnitude,
(FL×0.5)(cos 45) = 0.354 FL
The third torque is:
T₃ = FL/2 = 0.5FL
The fifth torque is:
T₅ = 2FL
The sixth torque is zero in magnitude as it is parallel to the door.
Hence, The fifth torque (T₅ ) is the largest then the third torque (T₃), after the third torque, the second and fourth torque (T₂) and (T₄), then the smallest torque is (T₆).
To learn more about Torque, here:
brainly.com/question/31323759
#SPJ12
#Complete question is:
Question: Six Forces, Each Of Magnitude Either F Or 2F, Are Applied To A Door As Seen From Above In (Figure 1) . Rank In Order, From Largest To Smallest, The Six Torques?1 To?6 About The door. Rank From Largest To Smallest. To Rank Items As Equivalent, Overlap Them. ?
Six forces, each of magnitude either F or 2F, are applied to a door as seen above in (Figure 1) .
Rank in order, from largest to smallest, the six torques 1 to 6 about the door.
the velocities and masses of four objects are shown. which one of the following is the has the inertia of the objects arranged from least to greatest ?
An object's resistance to changes in motion is measured by inertia. An object's inertia increases with its mass.
What are the objects having inertia from least to greatest?In order to arrange the inertia of the four objects shown from least to greatest, we must first determine the mass of each object.Object A has a velocity of 10 m/s and a mass of 5 kg.Object B has a velocity of 15 m/s and a mass of 10 kg.Object C has a velocity of 20 m/s and a mass of 20 kg.Object D has a velocity of 25 m/s and a mass of 15 kg.From the information provided, we can see that the masses of the objects are:Object A: 5 kgObject B: 10 kgObject C: 20 kgObject D: 15 kgTherefore, the inertia of the objects arranged from least to greatest is:Object A: 5 kgObject D: 15 kgObject B: 10 kgObject C: 20 kgInertia is directly proportional to the mass of an object, so the more massive an object is, the greater its inertia.To learn more about inertia refer:
brainly.com/question/1140505
#SPJ4
In order to arrange the inertia of the four objects shown from least to greatest, we must first determine the mass of each object.
Object A has a velocity of 10 m/s and a mass of 5 kg.
Object B has a velocity of 15 m/s and a mass of 10 kg.
Object C has a velocity of 20 m/s and a mass of 20 kg.
Object D has a velocity of 25 m/s and a mass of 15 kg.
From the information provided, we can see that the masses of the objects are:
Object A: 5 kg
Object B: 10 kg
Object C: 20 kg
Object D: 15 kg
Therefore, the inertia of the objects arranged from least to greatest is:
Object A: 5 kg
Object D: 15 kg
Object B: 10 kg
Object C: 20 kg
Inertia is directly proportional to the mass of an object, so the more massive an object is, the greater its inertia.
What, in layman's terms, is inertia?A body's inherent property of inertia makes it resistant to any force that would alter its motion. Acceleration could be caused by opposing forces acting on a still and moving body.
What exactly is motion inertia?Motion inertia: The fundamental property that a body has to resist any change in its motion is called inertia of motion. In other words, inertia of motion is when the body doesn't want to change its motion but wants to stay in its current state.
What motion law is inertia?Inertia refers to a body's ability to remain stationary or in motion at a constant speed. The "law of inertia" is a common name for Newton's first law.
Question incomplete:The velocities and masses of four objects are shown. Which object has the greatest inertia?
A 5kg v=2m/s
B 3 kg v=3m/s
C 4kg → v=1m/s
D 10 kg v=0m/s
Learn more about inertia:
brainly.com/question/1140505
#SPJ4
A 20 kg bike is traveling at 10 m/s o the right when it is struck by a truck traveling at -20 m/s to the left. The truck has a mass of 3,000 kg. Which of the following statements best describes the forces and accelerations involved during the collision?
During the collision between the bike and the truck, the two objects will experience forces and accelerations. The force of the collision will be the result of the difference between the momentum of the two objects before and after the collision. The momentum of an object is the product of its mass and velocity, represented as p = mv.
Before the collision, the bike has a momentum of 20 kg * 10 m/s = 200 kg m/s to the right and the truck has a momentum of 3,000 kg * -20 m/s = -60,000 kg m/s to the left.
After the collision, since the truck has a much greater mass than the bike, it will experience a much smaller change in momentum than the bike, and the final velocities of the two objects will be close to the initial velocity of the truck.
So, the force of the collision will be the difference between the initial momentum of the bike and truck and the final momentum of the bike and truck. This force will be acting on the bike, causing it to experience an acceleration. The truck will experience a force as well, but it will be much smaller in magnitude because of its much larger mass.
Therefore, the best statement that describes the forces and accelerations involved during the collision is: The bike experiences a large force during the collision, causing it to experience a large acceleration, while the truck experiences a smaller force and acceleration due to its much larger mass.
tesla is building a car battery factory in nevada to drastically increase its production capacity from where it is now. since the factory has not opened, tesla is .
Tesla is constructing a vehicle battery facility in Nevada to significantly enhance its current production capability. Since the facility has not yet begun operations, Tesla is expanding its manufacturing potential.
All the electrical parts of your automobile are powered by a surge of electricity from the car battery. We're talking about a sizable duty here. Your car won't start without a battery, as you may have discovered.
Let's see how that potent tiny box functions:
Your automobile is started by a chemical reaction: Your battery delivers voltage to the starter, converting chemical energy into the electrical energy required to operate your automobile.
Consistently maintain the electric current: In addition to supplying the power needed to start your automobile, your battery also maintains a stable voltage, which is what is needed to keep your engine running. On the battery, a lot depends. Think of it as the "small box that could."
Learn more about Battery here:
https://brainly.com/question/28146138
#SPJ4
✓
Question 3:
A small cube of mass m₁ slides down a circular track of radius,
cut into a large block of mass m₂ = 2m₁ as shown in the figure
below. The large block rests on a table, and both blocks movė
without friction. The blocks are initially at rest, and m₁ starts
from the top of the path. Find the magnitude of velocity of the
cube as it leaves the block.
The blocks are initially at rest and 'm' starts from the top of the path. Find the velocity 'v' of the cube as it leaves the block.
What is a simple definition of velocity?Velocity is a vector expression of the displacement that an object or particle undergoes with respect to time . The standard unit of velocity magnitude (also known as speed ) is the meter per second (m/s).
What is velocity SI unit and formula?The average velocity of the object is defined as the total displacement of the object divided by the total time taken. It is given by. Average velocity = Total displacement/ Total time taken. The SI unit of average velocity is m s-1 or m/s.
To know more about velocity visit
https://brainly.com/question/17127206
#SPJ1
At first, the blocks are at rest, and the letter "m" begins at the beginning of the route. As the cube exits the block, determine its velocity, or "v."
What is the straightforward meaning of velocity?The shift that an objects or particles experiences with the passage of time is expressed vectorially as velocity. The centimeter per second (m/s) is the accepted unit of flow velocity (also known as speed).
What are the formula and SI unit for velocity?The entire displacement of the item multiplied by the overall time elapsed gives the object's average velocity. It is supplied by. Average velocity is calculated as total displacement divided by time. M s-1, or m/s, is the SI unit for average velocity.
To know more about velocity visit:
brainly.com/question/17127206
#SPJ1
the shear leg derrick is used to haul the 200-kg net of fish onto the dock. determine the compressive force along each of the legs ab and cb and the tension in the winch cable db. assume the force in each leg acts along its axis
each leg's strength With forces of Fab = 2.52 KN, Fcb = 2.52 KN, and Fbd = 3.64 KN, the shear leg derrick is used to raise the 200 kg fish net onto the pier. Do the compression force along each leg calculations.
(db), (ab), and (cb) of the winch cable. In physics, a force is an effect that has the ability to change how an object moves. A mass-containing object's velocity or acceleration can be altered by a force (for example, moving from a condition of rest).
If 0.6667Fab + 0.6667Fcb - 0.9231Fbd = 0, then 0.6667 Fab + 0.6667Fcb - 0.3846 Fbd - 1962 = likewise.
By resolving these three equations, we arrive to the values Fab = 2.52KN, Fcb = 2.52KN, and Fbd = 3.64KN.
Learn more about force here
https://brainly.com/question/13191643
#SPJ4
A person is riding their bicycle along a straight
road at a speed of 7.9 m/s. In total, they have a
mass of 88 kilograms. What is the kinetic energy,
in joules, of the person with their bicycle?
Answer: 2746.04 joules
Explanation:
The equation K=(1/2)(m)(v)^2 will provide the answer.
K stands for Kinetic Energy
m stands for mass (88 Kg)
v stands for velocity (7.9 m/s)
When you sub in these variables you get:
K=(1/2)(88 Kg)(7.9 m/s)^2
K=2746.04 joules
12. What is the initial height of a 2.75-kg baseball that was thrown at velocity of 7.9 m/s and
was caught with a glove at 11.8 m/s at a height of 1.25 m?
The initial height of a 2.75-kg baseball that was thrown at velocity of 7.9 m/s 21.725.
What is the initial height?To emphasise the relief-like structure in a processed representation, the object's initial height representation is treated utilising height alterations.
h = v 0 y 2 2 g . h = v 0 y 2 2 g . This equation, which solely depends on the vertical component of the starting velocity, specifies the maximum height of a projectile above its launch site.
The formula is expressed as v 2 u 2 =2as, where v is the final velocity, u is the beginning velocity, an is the acceleration due to gravity, 9 m/s 2 and s = h is the height travelled.
The information above allows us to locate you. At the top of the journey in this instance, v equals 0.
2.75 * 7.9 m/s . = 21.725.
Consequently, the ball's starting speed was 10 m/s.
To learn more about initial height refer to:
https://brainly.com/question/12446886
#SPJ1
Why must the lamina swing freely when determining the centre of gravity?
By allowing the lamina to swing freely, the object's true weight distribution and the center of gravity can be observed and determined with greater accuracy.
The lamina (such as a flat plate or sheet) must be able to swing freely when determining the center of gravity (also known as the center of mass) for a few reasons:
First, the center of gravity is the point at which the weight of an object is evenly distributed, and the object will be balanced when suspended from that point. In order to determine the center of gravity, the object must be allowed to rotate or move freely, so that its weight distribution can be observed.
Second, if the lamina is not able to swing freely, it would be affected by external forces such as friction or air resistance, which could influence the object's weight distribution and give an inaccurate location of the center of gravity.
Third, if the lamina is not able to swing freely, it would be difficult to observe the object's movement, and therefore it would be difficult to determine the center of gravity.
learn more about center of gravity here:
https://brainly.com/question/17409320
removing heat will lower the ___, causing the particles of the reactants to slow down, resulting in less frequent collisons
Removing heat will lower the temperature, causing the particles of the reactants to slow down, resulting in less frequent collisions.
Give a short note on temperature?The temperature of a system is a measure of the average kinetic energy of the particles that make up the system. As the temperature decreases, the kinetic energy of the particles decreases, and their movement slows down. In a chemical reaction, the reactant particles collide with each other in order to react. The more frequently and forcefully they collide, the more likely they are to react. So if the temperature is lowered, the rate of the chemical reaction will decrease because there will be fewer successful collisions between the reactant particles.
To know more about collisions visit:
https://brainly.com/question/29308013
#SPJ4
Draw two lowest-order Feynman diagrams for scattering of an electron neutrino by an electron
A fundamental particle with no electric charge and a spin of one-half is called an electron neutrino (v).
Explain about the electron neutrino?The subatomic particle known as a neutrino resembles an electron in many ways, but it differs in that it lacks an electrical charge and has a very small mass that may even be zero. One of the cosmological particles with the highest density is the neutrino. However, they are exceedingly difficult to find because they barely interact with matter.
Small, almost massless particles known as neutrinos move at speeds close to light. They are phenomenally common in the universe and can move through lead as readily as we do through air. They are the product of intense astronomical events like exploding stars and gamma ray bursts.
A flat recoil energy spectrum is the result of monoenergetic electron neutrinos scattering from electrons.
To learn more electron neutrino refer to:
https://brainly.com/question/518346
#SPJ1
which of the following best describes the movement of an electron after it is ejected from the cathode?
Charged particles accelerate in an electric field. Electrons begin with a velocity that increases as they approach the anode from the cathode through the vacuum.
Cathodes come from cations (positively charged ions) and anodes come from anions (negatively charged ions). In devices that use electricity, the cathode is the negatively charged electrode. Thomson showed that cathode rays consist of hitherto unknown negatively charged particles (later called electrons). To display images on a screen, a cathode ray tube (CRT) uses a focused electron beam that is deflected by an electric or magnetic field. An anode is a negative or reducing electrode that donates electrons to an external circuit and oxidizes during an electrochemical reaction. A cathode is a positive or oxidizing electrode that receives electrons from an external circuit and is reduced during an electrochemical reaction.
Learn more about the cathode in
https://brainly.com/question/4052514
#SPJ4
Particles Of Charge +65, +48, And −95 ΜC Are Placed In A Line (Figure 1) . The Center One Is L = 60 Cm From Each Of The Others. Part A Calculate The Net Force On The Left Charge Due To The Other Two. Enter A Positive Value If The Force Is Directed To The Right And A Negative Value If The Force Is Directed To The Left. Express Your Answer ToThis problem has been solved!You'll get a detailed solution from a subject matter expert that helps you learn core concepts.See AnswerParticles of charge +65, +48, and −95 μC are placed in a line (Figure 1) . The center one is L = 60 cm from each of the others.no title providedPart ACalculate the net force on the left charge due to the other two. Enter a positive value if the force is directed to the right and a negative value if the force is directed to the left.Express your answer to two significant figures and include the appropriate units.Part BCalculate the net force on the center charge due to the other two. Enter a positive value if the force is directed to the right and a negative value if the force is directed to the left.Part CCalculate the net force on the right charge due to the other two. Enter a positive value if the force is directed to the right and a negative value if the force is directed to the left.
Net force on left charge due to other 2 is -39.41N,Force on charge 2 due to 1 is 192N,Force on charge 3 due to 1 is -152.6N.
What in science is a force?
The word "force" has a specific meaning in science. At this level, calling a force a push or perhaps a pull is entirely appropriate. A strength is not really something an object "has in it" or that it "contains." One thing experiences a force from another. There are both living things and non-living objects in the concept of a force.
What are example and force?
Force is the term used to describe a body's tendency to incorporate the new its state as a result of an external cause. When force is applied, the item can also alter its size, shape, and direction. kicking a ball, pushing and pulling on the door, or kneading dough are a few examples.
To know more about force visit:
https://brainly.com/question/13191643
#SPJ4
Net force on left charge due to other two charges is -39.41N, force on charge two due to one is 192N, and force on charge three due to one is -152.6N.
What exactly is a force?
Force is an external influence that changes or has the potential to change the motion of an object. Force can be either a push or a pull, and can be measured in newtons. It can be caused by interactions between objects, or the result of an object’s interaction with a field, such as gravity. Force can cause a change in an object’s speed, direction, shape, and/or energy. Examples of forces include friction, tension, gravity, magnetism, and electrical forces. Force can also be thought of as the product of mass and acceleration. In order for an object to move, a force must act upon it.
To know more about force visit:
brainly.com/question/13191643
#SPJ4
more than one cyclf of the cosin wave is shown. three of the statements are true, and one is flase. which statement is falsse
From given statements for cycle of the cosine wave, the false statement is [tex]$ \mathrm{cos\frac{\pi}{6} = cos\frac{7\pi}{6} }[/tex].
What is an amplitude?An amplitude is a measure of the strength or magnitude of a signal, such as an electrical voltage, sound wave, or light wave. It is typically measured in decibels (dB), which is a logarithmic scale. Amplitude is usually related to the intensity or volume of a signal.
This is because a single cycle of a cosine wave is a single period of the wave, and a single period of the wave is usually defined as the time between two consecutive peaks or two consecutive troughs. In this case, there are more than two consecutive peaks or troughs, so it cannot be said that a single cycle of the cosine wave is shown.
[tex]$ \mathrm{cos\frac{\pi}{6} = cos\frac{7\pi}{6} }[/tex] is a false statement as the variables can be factored out and we are left with 1 and 7
As
1 ≠ 7
[tex]$ \mathrm{cos\frac{\pi}{6} = cos\frac{7\pi}{6} }[/tex] is a false statement.
To know more about amplitude, visit
brainly.com/question/8662436
#SPJ4
Complete question:
if you have a mass of 50 kg and are in a planet where the acceleration of gravity is 5 m/s2, your weight on the planet is
If you have a mass of 50 kg and are on a planet where the acceleration of gravity is 5 m/s^2, your weight on the planet would be 250 N (Newtons)
Weight is the force exerted on an object due to gravity and is equal to the mass of an object multiplied by the acceleration due to gravity.
Weight = mass*gravity
The acceleration due to gravity on this planet = 5[tex]m/s^2[/tex]
The weight of the object with a mass of 50 kg = 50 kg ×5[tex]m/s^2[/tex] = 250 N.
Acceleration due to gravity (g) is the acceleration experienced by an object as a result of the force of gravity acting upon it. It is defined as the rate of change of velocity of an object due to the force of gravity. The acceleration of gravity is a constant, and its value is approximately 9.8 [tex]m/s^2[/tex] on the surface of the Earth.
Learn more about acceleration due to gravity here:
https://brainly.com/question/13860566
in which of the following situations is the gravitational force the dominant force? select two answers.
The gravitational force is the predominant force in the following circumstances:
1. When the moon orbits the Earth
2. When an asteroid orbits the Sun
What is gravitational force?Any two mass-containing objects are attracted each other by the invisible gravitational force. It is the weakest of the four fundamental forces of nature and is responsible for the orbits of planets around the Sun as well as the motion of galaxies. This force is inversely proportional to the square of the distance between the two objects, and it is proportional to the product of their masses. Isaac Newton was the first to describe gravity mathematically and proposed that it was a universal force. This force is responsible for keeping objects on the ground, and it is what causes objects to fall when they are dropped.
To learn more about gravitational force
https://brainly.com/question/27943482
#SPJ4
which of the following quantities is at a maximum when an object in simple harmonic motion is at its maximum displacement? A) Speed B) Acceleration C) Kinetic Energy D) Frequency E) Both A & C are valid
The following quantity is at maximum when an object in simple harmonic motion is at its maximum displacement : B) Acceleration. Hence, B) Acceleration is the correct answer.
What is meant by simple harmonic motion?In physics, simple harmonic motion is a repetitive movement back and forth through an equilibrium, or central position, so that the maximum displacement on one side of this position is equal to the maximum displacement on other side.
Simple harmonic motion is defined as periodic motion of a point along straight line, such that acceleration is always towards a fixed point in that line and is proportional to the distance from that point.
To know more about simple harmonic motion, refer
https://brainly.com/question/20885248
#SPJ4
Steam injection wells are common in California. These wells inject steam into liquid petroleum reservoirs, heating the crude oil, which lowers the oil's viscosity, making it easier to pump out of the ground.
Group of answer choices
True.
False.
True Steam injection wells are common in California. These wells inject steam into liquid petroleum reservoirs, heating the crude oil, which lowers the oil's viscosity, making it easier to pump out of the ground.
What is Steam injection ?With this method, wet saturated steam is first introduced into a well while being subjected to high pressure and temperature. The well is kept closed for a few days to allow the steam to soak after it has been injected sufficiently to heat the oil in the reservoir. Reopening the well results in oil production (hot-oil puffing).
Indirect heat exchangers use more energy than direct steam injection, which works by directly injecting steam into a process fluid to provide faster heat transfer.
Learn more about Steam injection here:
https://brainly.com/question/15231418
#SPJ4
A motorcycle and a car are travelling along a staright road. At t = 0 the motor cycle is behind the car by a distance of 52.0 m and both vehicles have a speed of 22.0 m/s . At a later time, t1 = 4.00 s , the motorbike begins a steady acceleration of 5.00 m/s2 and eventually passes the car at time t2
The time t2 when the motorcycle passes the car is approximately 6.41s.
How The answer was obtainedTo find the time t2 when the motorcycle passes the car, we can use the equation of motion with constant acceleration:
x = x0 + v0t + 0.5at^2
where x is the displacement, x0 is the initial position (52 m behind the car), v0 is the initial velocity (22 m/s), a is the acceleration (5 m/s^2), and t is the time.
At t2, the motorcycle will have covered the same distance as the car, so x = 0.
Substituting the known values and solving for t, we get:
0 = 52 + 22t + 0.5 * 5t^2
0.5t^2 + 22t + 52 = 0
Using the quadratic formula, the time t2 when the motorcycle passes the car is approximately 6.41 s.
Learn more on displacement here https://brainly.com/question/14422259
#SPJ1
