A bullet traveling horizontally losses 1/20th of its velocity while penetrating a wooden plank, how many sucj planks are required to stop the bullet?

Answer:

The objective was to find a campground before dark, but Maria and I were too enchanted with the forest to retain any sense of urgency. We were surrounded by Douglas Firs, which we'd learned could survive for hundreds of years. They shot up into the sky, their foliage blotting out the sunlight. Their massive red-brown trunks were wider than Maria and I when we stood side-by-side. We'd actually found one especially large Fir that had blown down over the winter. The hole left by its roots was about the size of a one-car garage.

I was whistling a tune, my eyes on the trees, when Maria pointed out a scrap of white paper. She picked it up. It was a candy bar wrapper.

"Litter bugs," I said, shaking my head. I couldn't understand how a fellow camper could be so careless.

Further down the trail, Maria spotted another wrapper: This time it was a package of rice, torn-open. Beyond that was a half-empty package of trail mix, upturned in the dirt. A trail of rice and nuts led into the woods.

"Let's pick this stuff up," Maria said. "That'll be our good deed for the day."

Maria spent the remainder of the hike picking up various half-eaten foods and trash. Meanwhile, I took photos of the trees. Eventually we came to a treacherous bridge overlooking a waterfall. The campground, I knew, would be on the other side of the bridge. This was a good thing: It was already dusk, and setting up the tent in total dark would have been difficult.

We arrived at the campground, ready to lecture the litter bugs that we imagined would have arrived before us. We were surprised to find the whole place uninhabited. Near the river bank, we found a flat area sheltered by trees. I was unfurling the tent when I heard a noise. I turned to Maria to ask her if she'd heard the noise, but the look on her face told me she had. Her eyes were wide with fright. She pointed at a spot in the bushes, and it was then that I saw the bear. It was foraging in the trees, and it had something in its mouth.

To my relief, it scampered off and disappeared. But not before it dropped the thing that it'd had in its mouth. It was an empty package of peanuts.

8

What is the best summary of the passage?

A.

Out in a forest, Maria and the narrator admire the Douglas Firs that are supposed to survive for hundreds of years. They search for a place where they can camp, and on the way they find a lot of trash. Maria picks up the trash, while the narrator takes pictures of the trees, and soon, they arrive at an uninhabited campground. While fixing the tent, they spot a bear in the bushes.

B.

Maria and the narrator are hiking in the forest and looking for a place to camp. They spot some Douglas Firs and are so enchanted by their beauty that they forget about their campground. After picking up trash from the forest and taking pictures, they come to a treacherous-looking bridge, and on the other side, they find a campground which is uninhabited.

C.

While looking for a campground, Maria and the narrator admire the Douglas Firs in the forest. On their way, they find a trail of half-eaten food, and Maria picks up the trash while the narrator takes pictures of the trees. Finally, they arrive at an uninhabited campground, and when they spot a bear near the bushes, it drops an empty package of peanuts and scampers away.

D.

While looking for a campground in the forest, Maria and the narrator spot a lot of trash, including candy wrappers and rice packets. They begin to collect the trash, and later when they spot some Douglas Firs, they become so enchanted by their beauty that they forget about their campground. Finally, they reach a place where they spot a bear.

Explanation:

The value of electric potential will be zero at 3 centimetres from x = 0 centimetres.

The formula to be used for calculation is -

V = 1/k((q/r)i + (q/r)f), where V represents voltage or electric potential, k is constant, (q/r)i is initial charge and radius and (q/r)f I'd second charge and radius. Taking the V to be zero, we will calculate the value of x.

V = 1/k (3/x + (-1/(x-4)))

Keep the value of electric potential as zero

0 = 1/k (3/x + (-1/(x-4)))

k will also become 0. Rewriting the equation

3/x = -1/x-4

3(x - 4) = -1×x

3x - 12 = -x

Rewriting the equation

3x + x = 12

4x = 12

x = 12/4

Performing division on Right Hand Side of the equation

x = 3

Thus, at 0 the value of V will be zero.

Learn more about electric potential -

https://brainly.com/question/26978411

#SPJ4

The distance traveled before take-off is 3,465.62 meters, Assume the airplane starts from rest. The airplane accelerates down a runway at 9.50 m/s^2.

The formula used to calculate the distance in physics is distance = initial velocity x time + (1/2) x acceleration x time^2. This formula assumes constant acceleration.

To determine the distance traveled before take-off, we can use the equation for distance, which is distance = initial velocity x time + (1/2) x acceleration x time^2. Since the airplane starts from rest, the initial velocity is 0. Plugging in the values given, we have:

distance = 0 x 29.8 + (1/2) x 9.50 x (29.8)^2

distance = (1/2) x 9.50 x (29.8)^2

distance = (1/2) x 9.50 x 893.24

distance = 3,465.62 m

So the distance traveled before take-off is 3,465.62 meters.

To know more about acceleration visit:

brainly.com/question/21509870

#SPJ4

For a proton: The magnitude of the acceleration will be 20 N/C in the direction of the center of the bead. This is due to the fact that the proton is positively charged and will be attracted to the bead's positive charge.

Acceleration is the rate of change of velocity. It is a vector quantity, meaning that it has both magnitude and direction. Acceleration is the rate at which an object's velocity changes over time, and can be calculated by dividing the change in velocity (delta v) by the time interval (delta t). Acceleration can be caused by a variety of different factors, such as a change in direction, a change in speed, or the application of a force.

For an electron:

The magnitude of the acceleration will be 20 N/C in the direction away from the center of the bead. This is due to the fact that the electron is negatively charged and will be repelled away from the bead's positive charge.

To learn more about acceleration
https://brainly.in/question/789316
#SPJ4

For a proton: The magnitude of the acceleration will be 20 N/C in the direction of the center of the bead. This is due to the fact that the proton is positively charged and will be attracted to the bead's positive charge.

a. Acceleration of proton:  1.72 x 10¹⁴ m/s² away from bead

b. an electron that is 1.0 cm from the center of the head:  3.16 x 10¹⁷ m/s²

Acceleration is the rate of change of velocity. It is a vector quantity, meaning that it has both magnitude and direction. Acceleration is the rate at which an object's velocity changes over time, and can be calculated by dividing the change in velocity (Δv) by the time interval (Δt). Acceleration can be caused by a variety of different factors, such as a change in direction, a change in speed, or the application of a force.

electric field due to charge is given by:

E = kq/r²

E = (9x10⁹)(20x10⁻⁹)/(10⁻²)²

E = 1.8x10⁶ N/C

Force on both electron and proton:

F = qE = 1.6x10⁻¹⁹( 1.8x10⁶ )

F = 2.88x10⁻¹³ N

Acceleration of electron = F/m

Ae = 2.88x10⁻¹³/(9.11x10⁻³¹)

Ae = 3.16x10¹⁷ m/s²  towards the bead

Acceleration of proton= 2.88x10⁻³/(1.67x10⁻²⁷)

Ap = 1.72x10¹⁴ m/s² away from bead

To learn more about acceleration refer to:

https://brainly.com/question/460763

#SPJ4

The wavelength and frequency are  0.1240 nm and 2.41 x 10^14 Hz respectively.

What is wavelength?

Wavelength is a concept in physics that describes the distance between repeating units of a wave, such as the distance between two crests of a water wave or two peaks of a light wave. It is a fundamental property of waves and is typically denoted by the Greek letter lambda (λ). The wavelength of a wave is inversely proportional to its frequency.

Part A

The energy of a photon can be calculated using the equation E = hf, where E is the energy, h is Planck's constant (h = 6.626 x 10^-34 J*s), and f is the frequency. To find the minimum frequency of a photon that can break a hydrogen bond, we can rearrange the equation to solve for f:

f = E / h

Given that 0.1 eV is required to break a hydrogen bond, we can convert this energy to joules by multiplying by the conversion factor 1 eV = 1.602 x 10^-19 J.

E = 0.1 eV * 1.602 x 10^-19 J/eV

E = 1.602 x 10^-20 J

Now we can substitute the value of E and h into the equation to find f:

f = 1.602 x 10^-20 J / (6.626 x 10^-34 J*s)

f = 2.41 x 10^14 Hz

So the minimum frequency of a photon that can accomplish this is 2.41 x 10^14 Hz.

Part B

The wavelength of a photon can be calculated using the equation c = fλ, where c is the speed of light, f is the frequency, and λ is the wavelength. To find the maximum wavelength of a photon that can accomplish this, we can rearrange the equation to solve for λ:

λ = c / f

Given that the minimum frequency of a photon that can accomplish this is 2.41 x 10^14 Hz and the speed of light is c = 3 x 10^8 m/s, we can substitute these values into the equation to find λ:

λ = 3 x 10^8 m/s / 2.41 x 10^14 Hz

λ = 0.1240 nm

So the maximum wavelength of a photon that can accomplish this is 0.1240 nm.

To learn more about wavelength:

https://brainly.in/question/21217959

#SPJ4

The region that best matches a typical IR spectrum is 4000 to 400 cm-1.

The IR spectrum is a plot of transmitted (or absorbed) frequencies versus transmission intensity (or absorption).

The region that best matches a typical IR spectrum is typically considered to be 4000 to 400 cm-1 , also known as the "fingerprint region" as it contains the majority of the vibrational absorption bands for most organic compounds.

However, it's worth noting that different types of compounds or samples may exhibit different spectral features and may require different regions to be examined in order to obtain meaningful information.

To know more about IR spectrum , visit:

brainly.com/question/15452269

#SPJ4

The following statements correctly describe the various technologies listed are c, d, e, and g.

A segment of the electromagnetic radiation spectrum with different wavelengths from roughly 700 nanometers (nm) to one millimetre is known as infrared radiation (IR), or simply infrared (mm). Despite shorter than radio waves, infrared waves are greater than visible light waves.

Electromagnetic wavelengths range from 30 to 0.03 cm at frequencies between 109 Hz (1 GHz) and 1000 GHz. There are various communication systems applications in this spectral domain that are essential in both the military and civilian fields.

Learn more about waves here:

brainly.com/question/25954805

#SPJ4

A flywheel accelerates angularly at 11 rev/min2, reaching 45 revolutions per minute in about 4.10 seconds after being turned on. In physics, "angular acceleration" refers to the speed.

Changes in angular velocity. Since spin angular velocity and orbital angular velocity are two different forms of angular velocity, respectively, there are two different types of angular acceleration. Spin angular acceleration and orbital angular acceleration are the names for these. Because there is no directional component, speed must be a scalar variable. The average speed in physics can be calculated by dividing the total distance travelled by the total amount of time.

Initial angular acceleration = 0 rev/min

Final angular acceleration = 42 rev/sec 45 = + alpha *4.10 alpha = 45/4.10 = 11 rev/min

Learn more about speed here

https://brainly.com/question/28224010

#SPJ4

At the origin, there is a resultant force equal 0.00396 N acting on the item.

Magnitude simply refers to distance or quantity in physics. It displays an object's size, direction, or speed, whether relative or absolute. It is used to indicate the size or scope of something. In physics, the term magnitude often denotes to an amount or size.

A vector's magnitude is determined by its length. The magnitude of the vector is denoted by the letter a. See the introduction to vectors for more details on a vector's magnitude. In both and three dimensions, the length of vectors can be calculated using formulas based on their coordinates.

To know more about Magnitude visit:

https://brainly.com/question/29766788

#SPJ4

The acceleration of the box is 2m/s².

Acceleration is the rate at which an object's velocity with respect to time changes. It is a vector quantity to accelerate (in that they have magnitude and direction). The direction of the net force acting on an object determines the direction of its acceleration.

To find the acceleration of the box, we can use Newton's second law of motion, which states that the acceleration of an object is equal to the net force acting on it divided by its mass.

The net force acting on the box is the force applied by Kevin (10 N) minus the frictional force (6 N), which is 4 N. Therefore, the acceleration of the box is:

acceleration = (net force) / (mass)

= (4 N) / (2 kg)

= 2 m/s²

To know more about acceleration, visit:

brainly.com/question/12550364

#SPJ4

The average acceleration of the horse is a = - 4.84 m/s².

Given is that the horse slows down from 39.2 mi/h to rest in 8.1 s.

We can write the average acceleration as -

a = (0 - 39.2)/8.1

a = - 39.2/8.1

a = - 4.84 m/s²

Therefore, the average acceleration of the horse is a = - 4.84 m/s².

To solve more questions on force, visit the link below-

brainly.com/question/1318725

#SPJ1

The lowest frequency that will produce constructive interference at your location is about 133.9 Hz.

The distance between the speakers affects the frequency of constructive interference because it affects the phase difference between the waves emitted by the speakers. A smaller distance between the speakers results in a smaller phase difference, and a larger distance results in a larger phase difference. This means that at a certain distance, the waves emitted by the speakers will be in phase, resulting in constructive interference. The frequency at which this occurs is dependent on the wavelength of the waves and the distance between the speakers.

The lowest frequency that will produce constructive interference at your location can be found using the equation:

f = v / (2d)

Given,

d = 0.600 m (distance between speakers)

d' = 1.000 m (distance from speaker to listener)

v = 331.4 + 0.6T m/s (speed of sound in air, where T is the temperature in Celsius)

T = 15.0 °C (air temperature)

First, we need to calculate the speed of sound at 15 degrees celsius:

v = 331.4 + 0.6T

v = 331.4 + 0.6 x 15

v = 343.4 m/s

Now we can calculate the frequency of constructive interference:

f = v / (2 x (d + d'))

f = 343.4 / (2 x (0.6 + 1))

f = 343.4 / (2 x 1.6)

f = 343.4 / 2.56

f = 133.9 Hz

To know more about frequency visit:

brainly.com/question/5102661

#SPJ4

The period on Mars is calculated to be 2.51 s when the acceleration of gravity on Mars is given.

Given that,

Gravitational acceleration on Earth = 9.8 m/s²

Acceleration due to gravity on Mars = 0.37 g = 0.37 × 9.8 = 3.626 m/s²

Time period of pendulum on Earth = 1.53 s

We know the expression for time period as, T = 2π √(L/g)

Comparing the accelerations and time periods on both the planets, we have,

T e : T m = 2π √(L/g e) : 2π √(L/g m)

T e : T m = 1/√g e : 1/√g m

T e : T m = √g m : √g e

1.53 : T m = √0.37 g : √g

1.53 : T m = √0.37

T m = 1.53 : √0.37 = 1.53 : 0.61 = 2.51 s

To know more about pendulum:

https://brainly.com/question/9421795

#SPJ4

The equation that best summarizes the internal energy (U) of a substance that has both kinetic and potential energy is

U = Σ(KEn) + Σ(PEn).

A substance's internal energy is the sum of the kinetic and potential energies of all of its constituent particles.

This inquiry asks if a substance's particles can contain both kinetic energy (KE) and potential energy (PE).

This means that the internal energy is the sum of the kinetic energy and potential energy of all the particles in the substance.

Therefore, equation that best summarizes the internal energy (U) of a substance that has both kinetic and potential energy is U = Σ(KEn) + Σ(PEn).

Learn more about Internal energy here:

https://brainly.com/question/25737117

#SPJ1

From the nine total balls, three groups of three balls each should be created. We compare the relative weight of the two groups. It should then be clear which group is heavier.

Because it will either tip the scales or keep them level. The group you excluded is then involved. The most common definition of weight in basic physics textbooks is the gravitational force exerted on a body. The formula W = mg, which stands for weight, object mass, and gravitational acceleration, is widely used to express this. Mass is a physics term for a quantitative measure of inertia, a fundamental property of all matter. It basically refers to the resistance a body of matter shows to a change in speed.

Learn more about mass here

https://brainly.com/question/18064917

#SPJ4

Adiabatic flame temperature of approximately 2300 K or 2027 °C

To calculate the adiabatic flame temperature, we need to know the heat of combustion of the fuel and the specific heat of the products of the combustion.

The heat of combustion of methane (CH4) is -890 kJ/mol. The balanced equation for the combustion of methane with oxygen is:

CH4 + 2O2 -> CO2 + 2H2O + heat

The molar ratio of air/CH4 = 9.524, which means that for every 1 mole of CH4, 9.524 moles of air are used. Since air is 21% O2 and 79% N2, the number of moles of O2 in 9.524 moles of air is (0.21) * (9.524) = 2.00 moles.

The number of moles of CO2 and H2O produced in the combustion of 1 mole of CH4 with 2 moles of O2 is 1 mole and 2 moles respectively

The adiabatic flame temperature is calculated using the equation:

ΔH / (ΔnCp) = ΔT

where ΔH is the heat of combustion of the fuel, Δn is the change in the number of moles of the products, and Cp is the specific heat of the products at constant pressure.

The specific heat of CO2 and H2O are 0.846 and 4.18 J/mol·K respectively.

ΔT = (-890 kJ/mol) / ((1+2) * (0.846 + 2*4.18) J/mol·K)

This gives an adiabatic flame temperature of approximately 2300 K or 2027 °C. This temperature is the highest temperature reached at the flame front when all the heat of combustion is used to raise the temperature of the products and no heat is lost to the surroundings.

To know more about adiabatic flame:

https://brainly.com/question/14863146

#SPJ4

It is true that When reducing a system of parallel, non-concurrent forces acting on a body to a single resultant force, the line of action (LOA) of the resultant force .

IAny action that aims to maintain, modify, or transform a body's motion is considered a force in mechanics. Isaac Newton ’s second laws of motion, which are outlined in his Principia Mathematica, are frequently used to illustrate the concept of force (1687).

An immobile body can be made to move. A moving body can either be stopped or slowed down by it.Along altering its size and shape, it can alter the direction of such a moving body as well.

To learn more about force visit:

https://brainly.com/question/13191643

#SPJ4

That  aluminum has a mass of 2.70 g.

What is Density?

The density of a material substance is its mass in relation to its volume.

A common unit of measurement for density is grammes per cubic centimetre. In kilogrammes per cubic metre, density can also be expressed (in metre-kilogram-second or SI units). For example, the weight of air is 1.2 pounds per cubic metre. The usual solids, liquids, and gases' densities are listed in textbooks and manuals. Density is a simple tool for determining the relationship between mass and volume; for instance, the mass of a body is equal to its volume multiplied by the density

The density of a substance tells you the mass of exactly one unit of volume of said substance.

In your case, aluminium is said to have a density of

density Al=2.70 g.cm−3

This tells you that every 1 mL of aluminum has a mass of 2.70 g.

All you have to do now is use the density of aluminium as a conversion factor to go from cubic centimeters of aluminium to grams

Learn more about Density from given link

https://brainly.com/question/1354972

#SPJ4

The cosine and sine functions of y(4) are, respectively, 0.033 and 0.042 when A = 0.75. Maximum particle movement is the definition of a sound wave's amplitude.

A sound wave's frequency is determined by how many vibrations it makes per second. 2016-08-05. Accessed 30 June 2022. A sound wave's amplitude can be used to measure its height. A wave is an energetic perturbation of a medium without net particle motion. Elastic deformation, changes in pressure, alterations in the strength of the electric or magnetic fields, modifications in the electric potential, or adjustments in temperature could all be signs of it. The cosine and sine functions of y(4) are, respectively, 0.033 and 0.042 when A = 0.75.

Y(4) = 0.75SIN(4*PI/5), which is 0.75(0.044) = 0.033, is the equation.

The formula for Y(4) is 0.75COS (PI/4*4) = 0.75(0.044) = 0.042.

Learn more about amplitude here

https://brainly.com/question/8662436

#SPJ4

For photons, time does not pass. In a vacuum, photons move at the same speed as light and have no mass.

A photon is a microscopic particle of electromagnetic energy, which is similar to a light particle. The frequency of the photon (i.e., how quickly the electric field and magnetic field oscillate; "rapid electric field" and "wiggle" need better terminology) determines its energy.

A photon is a microscopic particle made up of electromagnetic radiation waves. Photons are essentially electric fields traveling through space, as Maxwell showed. Photons have no charge and no rest mass, and they move at the speed of light.

To know more about photons, visit:

brainly.com/question/20912241

#SPJ4

Water is the most significant and prevalent liquid on planet. There is no life without water. The region of the earth where liquid water is present is where life is found. Water exists as solid ice on other planets with pressures of 2500mmHg.

The light you feel on your face, the wind that blows through your schoolyard and waves the flag, and even the clouds you see in the sky are all effects of the atmosphere of Earth. The atmosphere of Earth extends from the surface of the planet.

The four atmospheric layers that make up the Earth's atmosphere are called the troposphere, stratosphere, mesosphere, and thermosphere.

To know more about atmosphere visit:

https://brainly.com/question/26767532

#SPJ4

a) On dry concrete, acceleration on incline plane with friction for a body going down is given as -7.55 m/s².

b) On wet concrete, acceleration on incline plane with friction for a body going down is given as -4.67 m/s².

c)  On ice, acceleration on incline plane with friction for a body going down is given as 1.08 m/s².

Acceleration is the rate at which the speed and direction of a moving object change over time. When a point or object moves faster or slower in a straight line, it is said to be accelerated. Even though the speed is constant, motion on a circle accelerates because the direction is constantly shifting.

a) On dry concrete = µ = 1

Acceleration on incline plane with friction for a body going down is given as

a = g Sin12 - µg Sin12

a = 9.8 Sin12 - 1 x 9.8 cos12

a = -7.55 m/s²

b) On wet concrete, µ = 0.7

Acceleration on incline plane with friction for a body going down is given as

a = g Sin12 - µg Sin12

a = 9.8 Sin12 - 0.7 x 9.8 cos12

a = -4.67 m/s²

c) On ice,  µ = 0.1

Acceleration on incline plane with friction for a body going down is given as

a = g Sin12 - µg Sin12

a = 9.8 Sin12 - 0.1 x 9.8 cos12

a = 1.08 m/s².

To know more about acceleration visit:

https://brainly.com/question/16911777

#SPJ4

Complete question is attached below.

Answer:2000jules

Explanation:

another friend With a force of 400 newtons and down the slope, and it applies this force Through a distance of five m. So they want to know what the work is. So the equation for work is force times distance, and usually we want to put with the cold sine of the angle between them if they are not aligned, but in this case they are aligned. So the call sign turns out to be one. So all we have to do is multiply force times distance 400 times five, and we get a value of And this is equal to 2000 jules. That's the answer to the problem.

Answer:

Explanation:

The power delivered completing this task can be calculated using the formula Power = Work/Time. In this case, the power is equal to 30 J/15 s, which simplifies to 2 J/s. This can also be expressed as 2 Watts (W).

Important Formulas:

[tex]p=\dfrac{w}{t}[/tex]

power(measured in watts) = work(measured in joules) / time(measured in seconds)

__________________________________________________________

Given:

[tex]w=30J[/tex]

[tex]t=15s[/tex]

[tex]p=?[/tex]

__________________________________________________________

Finding power:

[tex]p=\dfrac{w}{t}[/tex]

[tex]p=\dfrac{30}{15}[/tex]

__________________________________________________________

[tex]\fbox{p = 2 watts}[/tex]

momentum   sphere is a compact, psychological game used in stick sports like pool, snooker, and carom billiards. the quantity, kind, size, hue, and design of the balls.

Every time a stroke causes the ball actually or just about any object ball to leap off the table in a game of pocket billiard, the stroke is indeed a foul. While all balls have stopped, all leapt object balls can be seen (apart from 8 and 9-Ball).

One white ball actually and fifteen colored, numbered balls make up a set of billiard balls. The balls with the numbers 1 through 8 and 9 through 15 are all solid colors.are white with such a colored band in the middle. The balls have a diameter of 52.5mm and are colored und numbered as follows: 1 and 9 in yellow.

To know more about momentum  visit :

https://brainly.com/question/24030570

#SPJ4

The velocity of the particle at the time when its displacement is 5.0 m is 8.0 m/s.

Velocity is a vector quantity that describes the rate of change of an object's position. It is measured in units of distance per time, such as meters per second (m/s) or miles per hour (mph). Velocity is composed of both a magnitude (or speed) and a direction.

(a) To find the time at which the displacement is 5.0 m, we can use the equation:

d = v_0*t + (1/2)at^2

where d is the displacement, v_0 is the initial velocity, t is the time, and a is the acceleration.

Given:

d = 5.0 m

v_0 = 2.0 m/s

a = 6.0 m/s^2

Rearranging the equation to solve for time:

t = (d - v_0t)/(1/2a)

5.0 = 2.0*t + (1/2)6.0t^2

5.0 = 2.0t + 3.0t^2

Solving for t:

t = 1.0 s

(b) To find the velocity at time t, we can use the equation:

v = v_0 + a*t

Given:

v_0 = 2.0 m/s

a = 6.0 m/s^2

t = 1.0 s

Plugging in the given values:

v = 2.0 + 6.0*1.0

v = 8.0 m/s

To know more about velocity visit:

https://brainly.com/question/28738284

#SPJ4

1) Q total = 0J

2) Since there has been no net heat exchange, the entire system is cooling.

In accordance with the U.S. Energy Statistics Management, coal, nuclear power, and natural gas made up the majority of the country's electrical generation in 2020. Renewable energy sources like wind, hydropower, solar, biomass, breezes, and geothermal are also used to generate electricity.

According to the first law of thermodynamics

ΔE = Q - W

where ΔE= change in internal energy , Q = heat and W= work done by the system to the surroundings

in the first step

Q1 = ΔE + W = 228 J  + (-166 J) = 62 J

in the second step

Q2 = ΔE + W = 115 J  + (- 177 J) = -62J

the total heat is

Q total = Q1 +Q2 =  62 J + (-62J) = 0

since the total heat exchanged is 0, the overall process is a cooling process .

To know more about energy visit:

https://brainly.com/question/1932868

#SPJ4

The steering wheel's moment of inertia, K = - 2.69 105 J, is equal to the moment of apathy of a disc with just a shaft running through its center.

One of the most crucial components of a car or any vehicle, steering is utilized to move the vehicle. The steering system changes the steering wheel's revolution into a short-distance swiveling movement of the wheels, turning the steering wheel rim a considerable distance.

Calculation

  I = ½ M R²

  I = ½ 301  0.612²

  I= 56.37 kg m²

b) Work is equal to the change in kinetic energy

    W = ΔK = ½ I w² - ½ I w₀

As part of the rest the initial angular velocity is zero

    W = ½ I w²

Let's reduce the angular velocity to SI units

w = 1060 rev / in (2π rad / 1rev) (1min / 60s) = 111 rad / s

W = ½ 56.37 111²

W = 3.47 10⁵ J

c) Dissipated energy is equal to work

   W = ΔK

   W = ½ I ² - ½ I w₀²For this case

   w₀ = 111 rad / s

    = 502 rav / min (2pirad / 1rev) (1min / 60s) = 52,569 rad / s

ΔK = ½ 56.37 (52,569² - 111²)

ΔK = - 2.69 10⁵ J

To know more about steering visit;

https://brainly.com/question/14209645

#SPJ4

A. The ball can reach up to a height of 25.921 meters.

B. The speed required to leave the kicker's foot is 22.54m/s.

A particle or object moves with respect to time when moving at a certain speed, which is expressed vectorially as velocity. Meters per second (m/s) is the commonly used unit for measuring velocity magnitude, also known as speed.

Given information,

Time of flight (T) = 4.6s

Time required to reach the greatest height (t) = ?

T = 2t

4.6 = 2 × t

Divide both side by 2

t = 4.6/2

t = 2.3s

A. Determination of the greatest height.

Time required to reach the greatest height (t) = 2.3 s

Gravitational acceleration (g) is 9.8 m/s².

Greatest height (h) is?

h = ½gt²

h = ½ × 9.8 × 2.3²

h = 25.921 m

B. Determination of the initial velocity.

Greatest height (h) = 25.921m

Gravitational acceleration (g) is 9.8 m/s²

Final velocity (v) = 0

Initial velocity (u) = ?

v² = u² – 2gh

0² = u² – (2 × 9.8 × 25.921)

0 = u² – 508.0516

0 + 508.0516 = u²

508.0516 = u²

u = √508.0516

u = 22.54 m/s.

To know more about velocity visit:

https://brainly.com/question/24623833

#SPJ4

As said, cyclonic airflow is characterized by convergence at the surface and divergence above.

In the Northern Hemisphere, surface winds of cyclones blow anticlockwise, whereas, in the Southern Hemisphere, they blow clockwise. Cyclones are named for the way their winds swirl in a circle around their obvious center eye. The Coriolis effect explains why the flow of blood is going in the opposite direction.

Any significant wind storm that moves clockwise to the south of the equator and anticlockwise to the north and revolves around a low-pressure center is called a cyclone.

To know more about Cyclonic visit:

https://brainly.com/question/947289

#SPJ4