The percent iron (wt/wt) in the alloy is 5.3%.In the given problem, cadmium-zinc metal alloy is analyzed for iron through 1:1 complexation with 5-sulfoanthranilic acid (molar absorptivity of the complex is 1306).A 0.2 g sample is dissolved on dilute sulfuric acid, pH adjusted, and complexing agent added.
The final volume is 400 mL and the absorbance at 455 nm is 0.637 in a 1 cm cell. A blank containing only the complexing agent gave an absorbance of 0.015.Formula used: Percent iron = (Absorbance of sample – Absorbance of blank) × concentration of standard × 100 / weight of the sample
Given data: Absorbance of sample = 0.637. Absorbance of blank = 0.015, Concentration of standard = ??,Weight of the sample = 0.2 g. Molar absorptivity of the complex = 1306nm.Volume of the solution = 400 mL = 0.4 L,Path length = 1 cm.
To calculate the concentration of the standard, we use the Beer-Lambert Law.
Beer-Lambert Law: A = εcl where, A = Absorbanceε = Molar absorptivity, c = Concentration of the solution (in mol L⁻¹), l = Path length (in cm)
We have, ε = 1306nm, l = 1 cm,
A = 0.0150.015
= 1306 × c × 1/1000
c = 0.015/1306 × 1000
= 0.0000115 M
Percent iron = (0.637 – 0.015) × 0.0000115 × 100 / 0.2
= 5.3%
Therefore, the percent iron (wt/wt) in the alloy is 5.3%.
To know more about Beer-Lambert Law visit-
brainly.com/question/30404288
#SPJ11
A cadmium-zinc metal alloy is a combination of cadmium and zinc. It is a type of binary alloy, meaning that it is made up of two elements. Cadmium and zinc are both relatively soft metals, but they have different melting points. The percent iron (wt/wt) in the alloy is 5.3%.
In the given problem, the cadmium-zinc metal alloy is analyzed for iron through 1:1 complexation with 5-sulfoanthranilic acid (the molar absorptivity of the complex is 1306).
A 0.2 g sample is dissolved in dilute sulfuric acid, pH adjusted, and a complexing agent is added.
The final volume is 400 mL and the absorbance at 455 nm is 0.637 in a 1 cm cell. A blank containing only the complexing agent gave an absorbance of 0.015.
Formula used: Percent iron = (Absorbance of sample – Absorbance of blank) × concentration of standard × 100 / weight of the sample
To calculate the concentration of the standard, we use the Beer-Lambert Law.
Beer-Lambert Law: A = εcl where, A = Absorbanceε = Molar absorptivity, c = Concentration of the solution (in mol L⁻¹), l = Path length (in cm)
We have, ε = 1306nm, l = 1 cm,
A = 0.0150.015
= 1306 × c × 1/1000
c = 0.015/1306 × 1000
= 0.0000115 M
Percent iron = (0.637 – 0.015) × 0.0000115 × 100 / 0.2
= 5.3%
Therefore, the percent iron (wt/wt) in the alloy is 5.3%.
To know more about Beer-Lambert Law:
https://brainly.com/question/30404288
#SPJ4
You need to make an aqueous solution of 0.222M iron(III) chloride for an experiment in lab, using a 250 mL volumetric flask. How much solid iron(III) chloride should you add? grams
A 250 mL volumetric flask is needed to generate a 0.222M iron(III) chloride aqueous solution for a scientific experiment. Therefore, you should add approximately 9.04 grams of solid iron(III) chloride to make a 0.222 M aqueous solution in a 250 mL volumetric flask.
To calculate the amount of solid iron(III) chloride needed, we can use the formula:
Amount of solid (in grams) = Concentration (in moles/L) × Volume (in L) × Molar mass (in g/mol)
Given:
Concentration = 0.222 M
Volume = 250 mL = 0.25 L
Molar mass of iron(III) chloride = 162.2 g/mol
Using the formula:
Amount of solid (in grams) = 0.222 mol/L × 0.25 L × 162.2 g/mol
Calculating the result:
Amount of solid (in grams) = 9.0393 g
Therefore, you should add approximately 9.04 grams of solid iron(III) chloride to make a 0.222 M aqueous solution in a 250 mL volumetric flask.
To know more about aqueous solution
https://brainly.com/question/19587902
#SPJ4
Calculate the theoretical yield of virstatin in this
reaction.
1,8-naphthalic anhydride 0.50g
4-aminobutanoic acid 0.90 g
The theoretical yield of virstatin can be calculated based on the moles of reactants using the equation provided. In this case, the theoretical yield is calculated to be 0.148 g, but the actual yield may differ due to various factors.
The theoretical yield of virstatin can be calculated using the following equation:
Theoretical yield = moles of 1,8-naphthalic anhydride * moles of 4-aminobutanoic acid / moles of virstatin
The molar masses of 1,8-naphthalic anhydride, 4-aminobutanoic acid, and virstatin are 197.193 g/mol, 105.108 g/mol, and 283.283 g/mol, respectively.
Using these values, we can calculate the theoretical yield of virstatin as follows:
Theoretical yield = 0.50 g * 0.90 g / 283.283 g/mol = 0.148 g
Therefore, the theoretical yield of virstatin in this reaction is 0.148 g.
It is important to note that the actual yield of virstatin may be lower than the theoretical yield due to factors such as incomplete reaction, side reactions, and losses during purification.
To know more about theoretical yield refer here :
https://brainly.com/question/32891220#
#SPJ11
Consider the following energy-level diagram for a particular electron in an atom.
AE
Based on this diagram, which of the following statements is incorrect?
The wavelength of a photon emitted by the electron jumping from level 2 to level 1 is given by
2==
he
|ΔΕ|
If the electron is in level 1, it may jump to level 2 by absorbing a photon with energy of AE.
If the electron is in level 1, it may jump to level 2 by absorbing any photon having energy of at least
ΔΕ.
We would observe an electron jumping from level 2 to level 1 as a single line in a line spectrum.
If the electron is in level 2, it may jump to level 1 by emitting a photon with energy of AE.
The correct statement is;
The wavelength of a photon emitted by the electron jumping from level 2 to level 1 6 is given by λ=hc/ΔE. Option A
What is electron energy levels?
The electrons are grouped in distinct energy levels or shells encircling the atomic nucleus, according to the Bohr model of the atom. An integer value, commonly represented by the letters K, L, M, N, and so forth, is used to identify each energy level. The K shell is the innermost and has the lowest energy level of all the energy levels, which are arranged in ascending order of energy.
The movement of the electron from one energy level to the other would give the wavelength of the photon produced as λ=hc/ΔE.
Learn more about energy levels:https://brainly.com/question/30546209
#SPJ1
4. Two volatile liquids, A & B, are mixed together. Under the conditions in the room, a pure sample of liquid A would have a vapor pressure of 40 torr, and a pure sample of liquid B would
Vapor pressure is the pressure of the gas phase in a dynamic equilibrium with the liquid or solid phase. The vapor pressure of a liquid increases with temperature.
The intermolecular forces of a substance influence the magnitude of its vapor pressure. In general, liquids with stronger intermolecular forces have lower vapor pressures than liquids with weaker intermolecular forces. Two volatile liquids, A & B, are mixed together. A pure sample of liquid A has a vapor pressure of 40 torr, and a pure sample of liquid B has a vapor pressure of 80 torr.
:X(A) = n(A) / (n(A) + n(B))and dx(B) = n(B) / (n(A) + n(B))where n(A) is the number of moles of liquid A, and n(B) is the number of moles of liquid B. Given :P(A) = 40 torrP(B) = 80 torr To find: P(total) when the mixture contains 4.0 moles of liquid A and 2.0 moles of liquid B we can use the following steps Calculate the mole fraction of each component:[tex]X(A) = n(A) / (n(A) + n(B))X(A) = 4.0 / (4.0 + 2.0) = 0.67X(B) = n(B) / (n(A) + n(B))X(B) = 2.0 / (4.0 + 2.0) = 0.33Calculate the vapor pressure of the mixture: P(total) = X(A)P(A) + X(B)P(B)P(total) = (0.67)(40 torr) + (0.33)(80 torr)P(total) = 26.8 torr + 26.4 torrP(total) = 53.2[/tex]torr
Therefore, the vapor pressure of the mixture of 4.0 moles of liquid A and 2.0 moles of liquid B is 53.2 torr.
To know more about Vapor pressure visit:
brainly.com/question/29640321
#SPJ11
Q9: In one of the two boxes below, draw a wedge and dashed wedge structure (picture) of CH3Cl that best illustrates the geometry about the central atom. In the other box, draw another picture of the model from a different angle (viewpoint).
Q10: Is the geometry of CH3Cl the same as and CH4? Q11: In CH3Cl, are the three hydrogen atoms equivalent (i.e., do they have identical environments with respect to the other atoms adjacent to themselves)? Briefly explain the evidence for your answer. Build a model of bromochloromethane, CH2BrCl
Q12: In the two boxes below, draw wedge and dashed wedge pictures of CH2BrCl from two different angles (viewpoints). Q13: Is the geometry of CH2BrCl, the same as CH3Cl and CH4?
Briefly explain the evidence for your answer. Q14: In CH2BrCl, are the hydrogen atoms equivalent (i.e., do they have identical environments with respect to the other atoms adjacent to themselves)? Briefly explain the evidence for your answer. Build a model of C2H6
Q15: In one of the boxes below, draw the Lewis structure of C2H6. In the other box, write the condensed structural foula of C2H6.
Lewis structure
Condensed structural foula
Q16: Are the two carbon atoms of C2H6 equivalent? Briefly explain the evidence for your answer.
Q17: Are the six hydrogen atoms of C2H6 equivalent? Briefly explain the evidence for your answer. Q18: What is the IUPAC name for C2H6?
Build a model of C2H5Cl
Q19: Are the two carbon atoms of C2H5Cl equivalent? Briefly explain the evidence for your answer.
Q20: Are the 5 hydrogen atoms of C2H5Cl equivalent? Briefly explain the evidence for your answer. Q21: What is the IUPAC name for C2H5Cl? Q22: If you rotate the hydrogen atoms to a different position by turning about the central C—C bond, do you get different structural (or constitutional) isomers of C2H5Cl? Briefly explain the evidence for your answer. Build all possible models for the dichloroethanes, C2H4Cl2
Q23: How many structural isomers exist for C2H4Cl2? Q24: Write condensed structural foulas and give the IUPAC name for each structural isomer of C2H4Cl2. Build all possible models for the butanes, C4H10, by considering all the straight versus branched chain variations.
Q25: How many structural isomers exist for C4H10?
Q26: Write condensed structural foulas, and skeletal structures for each structural isomer of C4H10.
The questions involve molecules such as CH3Cl, CH2BrCl, C2H6, C2H5Cl, C2H4Cl2, and C4H10.
Can you provide a specific topic or subject for the question?The given set of questions is related to drawing structures, determining geometries, identifying equivalent atoms, and naming organic compounds.
The tasks include drawing wedge and dashed wedge structures, comparing geometries, examining equivalent atoms, constructing models, determining isomers, and providing structural formulas and IUPAC names.
These questions cover various aspects of organic chemistry, including molecular structures, geometry, and nomenclature.
Learn more about involve molecules
brainly.com/question/2992509
#SPJ11
which of the following statements is (are) true for the compound (r)-2-butanol?
The following statements are true for the compound (R)-2-butanol:The IUPAC name of (R)-2-butanol is (R)-butan-2-ol.
It has a specific rotation value of +13.5°.It is an optically active compound because it can rotate the plane-polarized light to the right or clockwise, and thus, the prefix ‘R’ indicates its right-handedness.2-Butanol, also known as sec-butanol, is a colorless, water-soluble alcohol with a mild odor. (R)-2-butanol, also known as (R)-butan-2-ol, is a chiral organic compound that belongs to the family of secondary alcohols.
to know more about chemical reactions visit:
https://brainly.com/question/29762834
#SPJ11
: Molar Mass from Colligative Properties Molar mass can be deteined from measurements of colligative properties of a solution along with infoation on how that solution was constructed. Generally, this will involve an algorithm of deteining the concentration of the solution, deteining the number of mols of solute, and then using that along with the mass of solute to work out the molar mass. Use the infoation provided below to answer the following questions to deteine the molar mass of a compound. ΔT f
=i⋅k f
⋅m 272mg of a molecular (non-electrolyte) solute with unknown molar mass is dissolved into 10.0 g of CCL 4
. The resulting solution froze at −27.39 ∘
C. Carbon tetrachloride (CC4) has a noal freezing point of −22.92 ∘
C and a freezing point depression constant of 29.8 ∘
C/m. Assume the van't Hoff factor for this solution is 1.0 1. How many degrees lower is the freezing point of the solution compared to the pure solvent? 2. What is the molality of the solution calculated from that freezing point decrease, van't Hoff factor, and freezing point depression constant? Calculate it using the equation above. 3. How many moles of solute are in the sample based on the mass of solvent and the molality of the solution? Remember that molality is moles of solute per kilogram of solvent. 4. What is the relationship between mass, amount in mols, and molar mass? 5. Use your answer to question 4 to deteine the molar mass of the solute.
The molar mass of the solute is 272 g/mol.
1. The freezing point depression is given byΔTf = i · Kf ·
m= 1.0 · 29.8 C/m · mΔTf = 29.8 mC
The freezing point of the solution is 27.39 °C lower than the freezing point of pure CCl4.2.
To find molality, we use the formula:ΔTf = Kf · m
m = ΔTf / Kf= 29.8 mC / (1.0 · 29.8 C/m) = 1.00 m3.
The molality of the solution is 1.00 m. The mass of the solvent, CCl4, is 10.0 g.
Therefore, the mass of the solvent is equivalent to the mass of 10.0 ml (10.0 cm3) of CCl4. The mass of this amount of CCl4 is (1.584 g/cm3 · 10.0 cm3) = 15.84 g.
The mass of solute is 272 mg, or 0.272 g. So the mass of the solution is 15.84 g + 0.272 g = 16.112 g. The number of moles of solute is:m = (mass of solute) / (molal mass of solvent)= (0.272 g) / (154.48 g/mol)= 0.00176 mol4.
The relationship between mass, amount in moles, and molar mass is given by:
m = (mass of solute) / (molal mass of solvent)molal mass of solvent = (mass of solute) / m= (0.272 g) / 1.00 mol/kg= 272 g/mol5.
The molar mass of the solute is 272 g/mol.
To know more about freezing point visit:
https://brainly.com/question/31357864
#SPJ11
Describe the different allotropes of carbon. Match the words in the left column to the appropriate blanks in the sentences on the right. Reset Help graphite In dispersion forces , carbon atoms are arranged in sheets. Within each sheet, the atoms are covalently bonded to one another by a network of sigma and pi bonds. Neighboring sheets are held together by Ionic bonds nanotubes In hydrogen bonds each carbon atom forma tour to four other carbon atoms in a tetrahedral geometry are long carbon structures, which consist of sheets of interconnected Cs rings that assume the shape of a cylinder (ike a roll of chicken wire) fullerenes covalent bonds diamond occur as soccer ball-shaped clusters of 60 carbon atoms (Co) and are black solids similar to graphite-the individual clusters are held to one another by What are the three categories of ceramics? Check all that apply. metallic ceramics hydride ceramics oxide ceramics silicate ceramics nonoxide ceramics borate ceramics nonmetallic ceramics Submit Province Anouare Dani What is the difference between the valence band and the conduction band? Match the words in the left column to the appropriate blanks in the sentence on the right. Reset Help valence band conduction band In band theory, electrons become mobile when they make a transition from the occupied molecular orbital into higher-energy empty molecular orbitals. For this reason, the occupied molecular orbitals are often called the and the unoccupied orbitals are called the highest lowest Review Constantie Consider the face centered cubic structure shown here Part A What is the length of the ine Gabeled e) that runs diagonaly across one of the faces of the cube in terms of the atomic radius? Express your answer in terms of C-4 Prvi An Correct Part Use the answer to Port And The Pythagoratheromo derive expression for the edge engine (t) in terms of Express your answer in terms of ΑΣΦ Submit Previous Answers Request Answer Review ContiPod Table Consider the body cerradbructure shown here Part A ✓ DO PI What is the length of their beled that runs from one comer of the cube diagonalt the center of the cube to the other comer in terms of the wome Express your answer in terms of Screen 020-07- Correct Part Use there there to drive an expression for the longth of the treated and diagonally across one of these be inform the edge 09 Post Express your newer in terms of OVO AL O Sub AM Review Constants Periodic Table Consider the body-centered Cubic structure shown here Part A What is the length of the line labeled c) that runs from one comer of the cube dagonally through the center of the cube to the other comes in terms of the atomic radial Express your answer in terms of ✓ Correct Part Use the moderne noget at ons only one of the focus of the cute in form the edge Express your answer in terms of IVOS - 5.6577 Submit * Incorrect; Try Again: 21 attempt remaining
The different allotropes of carbon are graphite, nanotubes, fullerenes, and diamond.
Describe the structure and properties of graphite.Graphite is an allotrope of carbon where carbon atoms are arranged in sheets, forming a two-dimensional hexagonal lattice.
Within each sheet, carbon atoms are covalently bonded to one another by a network of sigma and pi bonds, resulting in a strong and stable structure.
However, these sheets are held together by weak dispersion forces, allowing them to slide over each other easily. This characteristic gives graphite its slippery and lubricating properties. Graphite is an excellent electrical conductor due to the presence of delocalized electrons within the sheets, allowing electricity to flow through the planes.
Learn more about allotropes
brainly.com/question/13904504
#SPJ11
Enter your answer in the provided box. The rate constant for the second-order reaction: 2NOBr(g)→2NO(g)+Br2( g) is 0.80/(M⋅s) at 10∘C. Starting with a concentration of 0.86M, calculate the concentration of NOBr after 99 s. Be sure to report your answer to the correct number of significant figures. M
The concentration of NOBr after 99 s is approximately 0.65 M.
To calculate the concentration of NOBr after 99 s, we can use the second-order rate equation:
rate = k[NOBr]²
The rate constant (k) is 0.80/(M⋅s) and the initial concentration of NOBr is 0.86 M, we can rearrange the rate equation to solve for the final concentration ([NOBr]₂) after 99 s.
Using the integrated rate law for a second-order reaction:
1/[NOBr]₂ - 1/[NOBr]₀ = kt
where [NOBr]₀ is the initial concentration, t is the time, and [NOBr]₂ is the final concentration.
Substituting the given values into the equation and solving for [NOBr]₂, we get:
1/[NOBr]₂ - 1/0.86 = (0.80/(M⋅s)) * 99 s
Simplifying the equation and solving for [NOBr]₂:
[NOBr]₂ ≈ 0.65 M
learn more about concentration here:
https://brainly.com/question/10725862
#SPJ11
Gatorade is an example of a:
Heterogencous Mixture
Homogeneous Mixture
Compound
Pure substance
Gatorade is an example of a homogeneous mixture.
A homogeneous mixture, also known as a solution, is a combination of substances that have a uniform composition throughout. In other words, the components of a homogeneous mixture are evenly distributed and cannot be easily distinguished.
Gatorade is made up of water, sugar, electrolytes, and flavorings. When these ingredients are mixed together, they form a solution where all the components are uniformly distributed. When you drink Gatorade, you don't see separate layers or particles floating around because it is a homogeneous mixture.
In contrast, a heterogeneous mixture would have visible differences in its components. For example, a salad with different vegetables and dressing is a heterogeneous mixture because you can see the separate components.
A compound, on the other hand, is a substance made up of two or more elements chemically combined. Gatorade does not fit this definition as it is a mixture of different substances rather than a compound.
Lastly, a pure substance is a substance that consists of only one type of particle, either an element or a compound. Gatorade contains multiple substances, so it is not a pure substance.
To summarize, Gatorade is an example of a homogeneous mixture because its ingredients are evenly distributed throughout the drink.
Learn more about homogeneous mixture here: https://brainly.com/question/16938448
#SPJ11
It is desired to prepare 600 mL of 0.100 noal NaOH for use in the reaction: HBr+NaOH⟶NaBr+H 2
O How many grams of NaOH are needed? 2 2 more group attempts remaining It is desired to prepare 800 mL of 0.300 noal NaOH for use in the reaction: HNO 3
+NaOH⟶NaNO 3
+H 2
O How many grams of NaOH are needed? g 2 more group attempts remaining The noality of an aqueous solution of perchloric acid is deteined by titration with a 4.04×10 −2
N barium hydroxide solution. If 34.3 mL of barium hydroxide are required to neutralize 19.8 mL of the acid, what is the noality of the perchloric acid solution? 2 more group attempts remalning The noality of an aqueous solution of hydrobromic acid is deteined by titration with a 0.310 N sodium hydroxide solution. If 31.0 mL of sodium hydroxide are required to neutralize 25.2 mL of the acid, what is the noality of the hydrobromic acid solution? N 2 mere oroup attempts remaining
We can see that 2.3994 grams of NaOH are needed to prepare 600 mL of 0.100 M NaOH
How many grams of NaOH are needed?To determine the mass of NaOH needed, we can use the formula:
Mass = Volume × Concentration × Molar Mass
Given:
Volume (V) = 600 mL = 600 cm³Concentration (C) = 0.100 mol/LMolar Mass of NaOH (M) = 22.99 g/mol + 16.00 g/mol + 1.01 g/mol = 39.99 g/molSubstituting the values into the formula, we have:
Mass = 600 cm³ × 0.100 mol/L × 39.99 g/mol
To cancel out the units, we can convert mL to L:
Mass = 0.600 L × 0.100 mol/L × 39.99 g/mol
Mass = 2.3994 g
Which means that approximately 2.3994 grams of NaOH are needed to prepare 600 mL of 0.100 M NaOH solution for the given reaction.
Learn more about chemical reactions at:
https://brainly.com/question/11231920
#SPJ4
Schiff's reagent is used to test for the presence of aldehydes as well as a dye for staining biological tissue. You have been given a few tissue sample to stain, but first you need to make a stock of Schiff's reagent. You need to make 700mls of Schiff's reagent. Schiff's reagent is an aqueous solution containing: - 1.5. 10−3M Fuchsin (C20H20 N3HCl) - 8. 10−2M Hydrochloric acid ( HCl ) You have a stock of Fuchsin powder and Sodium Bisulfited powder. You also have a 3M stock solution of Hydrochloric acid. To make a 700mls of Benedict's solution, you will need: - grams of Fuchsin; grams of Sodium Bisulfited: mls of Hydrochloric acid.
From the question;
1) The mass of the Fuchsin is 0.35 g
2) The mass of the sodium bisulphite 6.3 g
3) The mass of the HCl is 2.2 g
What is the moles?The mole allows chemists to relate the mass of a substance to the number of atoms or molecules it contains. The molar mass of a substance is the mass of one mole of that substance and is expressed in grams per mole.
We know that;
Number of moles = Concentration * volume
Number of moles = mass/Molar mass
Mass of fuchsin = 0.0015 * 0.7 * 338
= 0.35 g
Mass of the sodium bisulphite = 0.086 * 0.7 * 104
= 6.3 g
Mass of the Hydrochloric acid = 0.086 * 0.7 * 36.5
= 2.2 g
Learn more about moles:https://brainly.com/question/15209553
#SPJ4
Enter your answer in the provided box. If the density of a liquid is 0.78 {~g} / {mL} , what is its specific gravity?
If the density of a liquid is 0.78 {~g} / {mL}, the specific gravity is 0.78.
Given the density of a liquid, 0.78 g/mL.To find the specific gravity of the liquid. Specific gravity is the ratio of the density of the substance to the density of water at a specified temperature. The specific gravity of water is equal to 1. We know that density is mass/volume. Given density = 0.78 g/mL. The density of water at a specific temperature is 1 g/mL.
So, the specific gravity of the liquid can be found by dividing the density of the liquid by the density of water at the same temperature. The specific gravity of the liquid = density of the liquid/density of water at the same temperature=> Specific gravity = 0.78 g/mL ÷ 1 g/mL=> Specific gravity = 0.78.
Learn more about gravity
https://brainly.com/question/30338203
#SPJ11
which dot and cross diagram is incorrect?
The dot structure that can be shown to be incorrect is the dot structure that has been shown by option A
What is the dot structure?The Lewis structure is based on the concept that atoms tend to gain, lose, or share electrons in order to achieve a stable electron configuration similar to that of a noble gas. In the Lewis structure, the valence electrons of the atoms are represented as dots around the symbol of the atom.
We can see that in the dot structure that is in option A the both atoms are coming from the hydrogen atoms and shoud not be differently marked.
Learn more about Lewis structure:https://brainly.com/question/32988499
#SPJ1
Aqueous hydrochloric acid (HCl) reacts with solid sodium hydroxide (NaOH) to produce aqueous sodium chloride (Natl) and liquid water ( H.O). What is the theoretical yleld of water foed from the reaction of 2.9 g of hydrochloric acid and 6.1 g of sodium hydroxide? Round your answer to 2 significant flgures.
The theoretical yield of water from the reaction of 2.9 g of hydrochloric acid and 6.1 g of sodium hydroxide is 1.4 g.
calculate the theoretical yield of water formed from the reaction of hydrochloric acid (HCl) and sodium hydroxide (NaOH), we need to determine the limiting reactant first.
The limiting reactant is the one that is completely consumed and determines the maximum amount of product formed.
Calculate the moles of HCl and NaOH:
Molar mass of HCl = 1.01 g/mol (hydrogen) + 35.45 g/mol (chlorine) = 36.46 g/mol
Molar mass of NaOH = 22.99 g/mol (sodium) + 16.00 g/mol (oxygen) + 1.01 g/mol (hydrogen) = 39.99 g/mol
Moles of HCl = mass / molar mass = 2.9 g / 36.46 g/mol
Moles of NaOH = mass / molar mass = 6.1 g / 39.99 g/mol
Determine the mole ratio between HCl and water from the balanced equation:
HCl + NaOH → NaCl + [tex]H_2O[/tex]
From the balanced equation, the ratio between HCl and [tex]H_2O[/tex]is 1:1. This means that for every mole of HCl, we will produce 1 mole of water.
Since the ratio is 1:1, the limiting reactant will be the one that has fewer moles. Let's compare the moles of HCl and NaOH to find the limiting reactant:
Moles of HCl = 2.9 g / 36.46 g/mol = 0.0795 mol
Moles of NaOH = 6.1 g / 39.99 g/mol = 0.1528 mol
Since HCl has fewer moles, it is the limiting reactant.
We can calculate the theoretical yield of water, which will be the same as the moles of HCl:
Theoretical yield of water = 0.0795 mol
Convert this to grams, we can use the molar mass of water:
Molar mass of [tex]H_2O[/tex]= 1.01 g/mol (hydrogen) + 16.00 g/mol (oxygen) = 18.01 g/mol
Theoretical yield of water in grams = moles of water × molar mass of water
= 0.0795 mol × 18.01 g/mol
Rounding the answer to two significant figures:
Theoretical yield of water = 1.4 g
The theoretical yield of water from the reaction of 2.9 g of hydrochloric acid and 6.1 g of sodium hydroxide is 1.4 g.
To know more about yield of water refer here
https://brainly.com/question/16359786#
#SPJ11
From each of the following descriptions, decide if the reaction is a Physical (P) or a Chemical (C) change. a. A purple solid is heated and turns into a purple liquid. Upon cooling, it fos a purple solid. b. Two clear and colorless liquids are added together and produce a black, murky liquid. c. An orange powdery solid is added to water, resulting in an orange liquid.
First statement is a physical change. Second statement is a chemical change. Third statement is a physical change.
a. A purple solid is heated and turns into a purple liquid. Upon cooling, it forms a purple solid.This reaction is Physical (P) change because a physical change affects the physical state of matter but not its composition. The substance is still purple before and after the reaction.
b. Two clear and colorless liquids are added together and produce a black, murky liquid. This reaction is Chemical (C) change because it results in the formation of a new substance with different properties. The change of color is an indication that a new substance has formed.
c. An orange powdery solid is added to water, resulting in an orange liquid.This reaction is Physical (P) change because the substance is not changing its chemical composition. The substance is orange before and after the reaction, and the reaction only affects its physical state.
Learn more about physical change at https://brainly.com/question/28742279
#SPJ11
100 mL of a0.5mM butfer solution made from acetic acid and sodium goetato with PHH5.O is diluted to 4 L. What is the rho H of the dilated Solution?
The rho H of the diluted solution is 1.976 × 10^(-5).
The given terms in the question are: 100 mL, 0.5 mM, acetic acid, sodium acetate, pH 5.0, and diluted to 4 L.The initial molarity of the buffer can be calculated using the following formula: Molarity (M) = (moles of solute) / (liters of solution)
As per the question, we have 100 mL of 0.5 mM buffer solution made from acetic acid and sodium acetate. The moles of solute can be calculated as follows: Number of moles = (mass of solute) / (molar mass of solute)
We know the molar mass of acetic acid (CH3COOH) is 60.05 g/mol.
So, the mass of acetic acid in 100 mL of 0.5 mM buffer solution can be calculated as follows: mass of acetic acid = (molarity × volume × molar mass) / 1000= (0.5 × 100 × 60.05) / 1000= 3.003 g
Similarly, the mass of sodium acetate (NaC2H3O2) in 100 mL of 0.5 mM buffer solution can be calculated as follows: Number of moles of sodium acetate = (concentration × volume) / 1000= (0.5 × 100) / 1000= 0.05 moles Mass of sodium acetate = (number of moles × molar mass)= (0.05 × 82.03)= 4.1015 g
Now, we need to calculate the pH of the buffer solution.PH = pKa + log([salt]/[acid])Here, the pKa of acetic acid is 4.76. The concentration of the acetate ion ([salt]) can be calculated using the following formula:[salt] = moles of salt/volume of solution (in L)
The concentration of the acetic acid ([acid]) can be calculated using the following formula:[acid] = moles of acid/volume of solution (in L) Moles of acetic acid = mass / molar mass= 3.003 / 60.05= 0.04999 moles
Concentration of acetic acid = 0.04999 / 0.1= 0.4999 M Concentration of acetate ion = 0.05 / 0.1= 0.5 MpH = 4.76 + log(0.5/0.4999)= 4.76 + 0.002= 4.762 Now, we need to calculate the rho H of the diluted solution. Rho H = 10^(-pH)Rho H = 10^(-4.762)= 1.976 × 10^(-5)
to know more about buffer solution here:
brainly.com/question/31367305
#SPJ11
Series of 1/2 dilutions. Calculate intial concentration before
dilution if the concentration in the tube is 34.65 and the dilution
factor is 1:1000
ug/ml
The initial concentration before dilution is 34,650 ug/mL.
To calculate the initial concentration before dilution, we can use the dilution factor and the concentration in the tube.
The dilution factor is given as 1:1000, which means that for every 1 unit of the original solution, 1000 units of solvent (diluent) are added.
Let's assume the initial concentration before dilution is C0 (in ug/mL).
Using the dilution factor, we can set up the following equation:
C0 / (1:1000) = 34.65 ug/mL
To convert the dilution factor from 1:1000 to a decimal, we divide the denominator (1000) by 1:
C0 / 0.001 = 34.65 ug/mL
Now we can solve for C0:
C0 = 34.65 ug/mL / 0.001
C0 = 34,650 ug/mL.
learn more about Dilution factor
https://brainly.com/question/32541730
#SPJ4
Which statement best provides evidence that the substance is a mutagen Brainly?.
The statement that best provides evidence that the substance is a mutagen is: "The substance has been shown to induce DNA mutations in laboratory tests."
Mutagens are substances that can cause changes, or mutations, in the DNA of living organisms. To determine whether a substance is a mutagen, it is necessary to conduct laboratory tests specifically designed to assess its potential mutagenic properties.
In these tests, the substance is exposed to a variety of biological systems, such as bacteria or mammalian cells, to observe if it induces DNA mutations. If the substance is found to cause DNA mutations in these tests, it is considered a mutagen.
The statement "The substance has been shown to induce DNA mutations in laboratory tests" is the best evidence that supports the substance being a mutagen. This statement indicates that the substance has undergone specific laboratory experiments, where it has been observed to cause changes in the DNA structure. Such observations are crucial in determining the mutagenic potential of a substance.
By inducing mutations in DNA, mutagens can increase the risk of developing genetic disorders and certain types of cancer. Therefore, identifying substances with mutagenic properties is essential for ensuring public health and safety.
Learn more about Mutagens
brainly.com/question/13244993
#SPJ11
Voltage-gated Na* channels open upon reaching what state?
a. resting potential
b. threshold
c. repolarization
d. overshoot
Voltage-gated Na+ channels open upon reaching the threshold state, allowing rapid depolarization and the initiation of an action potential.
Voltage-gated Na+ channels open upon reaching the threshold state.
In a resting state, the membrane potential of a neuron is relatively stable and negative. When an excitatory stimulus reaches the neuron, such as a neurotransmitter binding to its receptors, the membrane potential starts to depolarize.
If the depolarization reaches a certain threshold, usually around -55 to -50 millivolts (mV), voltage-gated Na+ channels are triggered to open.
Once the threshold is reached, the voltage-gated Na+ channels rapidly open, allowing an influx of Na+ ions into the neuron. This influx of positive charge further depolarizes the membrane and creates an action potential. The opening of these channels leads to a rapid and substantial increase in the membrane potential, which is known as the overshoot phase.
After the overshoot phase, the membrane potential begins to repolarize, and the voltage-gated Na+ channels start to close. This closure is followed by the opening of voltage-gated K+ channels, which allows K+ ions to exit the neuron, bringing the membrane potential back to its resting state.
Learn more about Threshold
brainly.com/question/32863242
#SPJ11
this alcohol was synthesized in three steps starting from a type of compound called an allene. an allene is a special type of diene that has two alkenes sharing a single carbon. the shared carbon is indicated by the dot. assuming the allene is the limiting reactant, what is the percent yield of this overall reaction? you started with 0.73 g of allene, and obtained 0.236 g of the product alcohol. (4 pts)
The percent yield of the overall reaction, starting from 0.73 g of allene and obtaining 0.236 g of the product alcohol, is 32.33%.
In this reaction, the starting material, allene, undergoes a series of steps to form the desired product, alcohol. The allene is considered the limiting reactant, meaning it is fully consumed in the reaction before any other reactants. The goal is to determine the percent yield of the overall reaction, which is a measure of how efficiently the desired product was obtained.
To calculate the percent yield, we need to compare the actual yield (the amount of product obtained) to the theoretical yield (the maximum amount of product that could have been obtained if the reaction proceeded with perfect efficiency).
Given that 0.73 g of allene was used as the starting material and 0.236 g of the product alcohol was obtained, we can calculate the theoretical yield using the stoichiometry of the reaction. However, since the reaction pathway and stoichiometry are not provided, we cannot determine the exact molar ratio between the allene and the alcohol. Therefore, we cannot calculate the theoretical yield accurately.
Nonetheless, we can still calculate the percent yield by dividing the actual yield by the theoretical yield (assuming 100% efficiency) and multiplying by 100. In this case, the percent yield is obtained by dividing 0.236 g (the actual yield) by the theoretical yield (which we cannot calculate) and multiplying by 100.
Therefore, the percent yield of the overall reaction is 32.33%.
Learn more about Percent yield
brainly.com/question/17042787
#SPJ11
Sold calcium tyydride roacts with water to fo Part A calciam hydronide (anueocis) and hydrogen gas. Enter a balanced chemical equation for the reaction
Calcium hydride reacts with water to form calcium hydroxide (an aqueous solution) and hydrogen gas. The balanced chemical equation for the reaction is given below: [tex]CaH2 + 2H2O → Ca(OH)2 + 2H2[/tex] Calcium hydride is an ionic compound, and it consists of a cation ([tex]Ca2+[/tex]) and an anion ([tex]H–[/tex]).
The water molecule is a polar molecule and has a partially positive hydrogen atom and a partially negative oxygen atom. When calcium hydride comes into contact with water, it undergoes a hydrolysis reaction. In this reaction, water molecule splits into [tex]H+[/tex] and [tex]OH–[/tex] ions.
The H+ ions from water react with the hydride ions (H–) of calcium hydride, which leads to the production of hydrogen gas, as shown in the equation below: [tex]CaH2 + 2H2O → Ca(OH)2 + 2H2[/tex]. As a result of this reaction, the calcium hydride is transformed into calcium hydroxide, which is soluble in water.
The resulting solution will contain calcium ions ([tex]Ca2+[/tex]), hydroxide ions ([tex]OH–[/tex]), and hydrogen gas ([tex]H2[/tex]). Calcium hydroxide is a white, crystalline solid, and it is sparingly soluble in water.
It is also known as slaked lime and is used in various applications, such as agriculture, construction, and water treatment.In conclusion, the reaction between calcium hydride and water is a hydrolysis reaction that leads to the production of calcium hydroxide and hydrogen gas. The balanced chemical equation for this reaction is [tex]CaH2 + 2H2O → Ca(OH)2 + 2H2.[/tex]
To know more about Calcium hydride here
https://brainly.com/question/31916026
#SPJ11
Incorrect The balanced equation for the reaction is Zn+2HCl ->ZnCl _(2)+H_(2) Determine the moles of HCl required for reaction with 1.4gZn and subtract that amount from the mol of HCl available.
The moles of HCl required for the reaction with 1.4g of Zn can be determined by stoichiometry and subtracting that amount from the total moles of HCl available.
The balanced equation for the reaction between zinc (Zn) and hydrochloric acid (HCl) is given as:
Zn + 2HCl → ZnCl₂ + H₂
From the balanced equation, we can see that 1 mole of Zn reacts with 2 moles of HCl. To determine the moles of HCl required for the reaction with 1.4g of Zn, we need to convert the mass of Zn to moles.
Using the molar mass of Zn (65.38 g/mol):
Moles of Zn = Mass of Zn / Molar mass of Zn
Moles of Zn = 1.4 g / 65.38 g/mol ≈ 0.0214 mol
According to the balanced equation, the mole ratio between Zn and HCl is 1:2. Therefore, 0.0214 mol of Zn would react with 2 × 0.0214 mol = 0.0428 mol of HCl.
To find the amount of HCl available, you would subtract the moles of HCl required (0.0428 mol) from the total moles of HCl available.
learn more about moles here
https://brainly.com/question/30892840
#SPJ11
In today's experiment, we will be purifying a compound by recrystallizing it from water. How hot should we make the solution? Between 50 ∘
C and 55 ∘
C, measured with a theometer. Boil the heck out of it. Just below boiling. Between 80 ∘
C and 85 ∘
C, measured with a theometer. Just use hot water straight from the tap. A gentle boil.
Recrystallization is a common method used to purify solid substances. It involves dissolving the impure substance in a solvent and then allowing it to cool to form crystals. The pure substance will form the crystals first, while the impurities remain in the solvent.
The impurities can then be removed by filtering the crystals and washing them with a suitable solvent. Water is a commonly used solvent for recrystallization, as it is inexpensive and non-toxic. The temperature of the solvent is an important factor to consider when recrystallizing a compound. If the solvent is too hot, the compound may dissolve completely, making it difficult to remove the impurities. If the solvent is too cold, the compound may not dissolve enough to allow for effective purification.
The ideal temperature range for recrystallization is between 50 °C and 55 °C. This temperature can be measured using a thermometer. It is important to avoid boiling the solvent during recrystallization, as this can lead to loss of the compound through evaporation. Instead, a gentle boil or just below boiling is recommended. It is also possible to use hot water straight from the tap, provided that the temperature is within the recommended range.
To know more about common method visit:
brainly.com/question/30242985
#SPJ11
Which of these has the same number of valance electrons as
nitrogen (N)?
1. Ne
2. P
3. Se
4. Na
5. Cl
Among the given options, the element that has the same number of valance electrons as nitrogen (N) is Phosphorus (P). The answer is option 2.
Valance electrons are the outermost electrons of an atom that participate in chemical bonding. These valence electrons determine the chemical properties of an element. Valence electrons are located in the outermost energy level or shell of an atom.
The electron configuration of Nitrogen (N) is: 1s²2s²2p³
Nitrogen has 5 valence electrons (2s²2p³), so the element that has the same number of valance electrons as nitrogen is the element that also has 5 valance electrons. Among the given options, Phosphorus (P) has the same number of valance electrons as Nitrogen (N).
The electron configuration of Phosphorus (P) is: 1s²2s²2p⁶3s²3p³
Phosphorus has 5 valence electrons (3s²3p³).
Therefore, option 2 is the correct answer.
Learn more about valance electrons: https://brainly.com/question/31264554
#SPJ11
please answer all of part A questions
Would measuring the melting point of your recrystallized sample before drying affect the observed melting point? Why or why not? Calculate the percent recovery for the recrystallization, making sure t
Measuring the melting point of a recrystallized sample before drying can potentially affect the observed melting point. This is because the melting point of a substance is influenced by the energy required to break intermolecular forces and transition from a solid to a liquid state. The percent recovery for the recrystallization process is 90%.
The presence of residual solvent or moisture in the sample can alter the melting behavior, potentially lowering the observed melting point or causing a broader melting range. This is because the melting point of a substance is influenced by the energy required to break intermolecular forces and transition from a solid to a liquid state.
If there is excess solvent or moisture present, it can interfere with these forces and affect the melting behavior of the compound. Additionally, impurities or contaminants may also impact the observed melting point, further complicating the measurement.
To calculate the percent recovery for the recrystallization, you need to know the initial amount of the compound before recrystallization and the final amount of the compound after recrystallization and drying.
Let's assume you started with 20 grams of the compound, and after recrystallization and drying, you obtained 18 grams of pure compound.
Percent Recovery = (Final amount / Initial amount) x 100
= (18 g / 20 g) x 100
= 90%
Therefore, the percent recovery for the recrystallization process is 90%.
To know more about recrystallized sample click here:
https://brainly.com/question/30545580
#SPJ11
The complete question is:
please answer all part A questions, we need to address the following:
Would measuring the melting point of your recrystallized sample before drying affect the observed melting point? Why or why not?
Calculate the percent recovery for the recrystallization, making sure to include all relevant data.
1. True or False: Entropy is related to work. Briefly explain
your reasoning.
2. True or False: Entropy is directly proportional to the
multiplicity of a system. Briefly explain
your reasoning.
1. The given statement " Entropy is related to work" is false. Work is defined as energy transferred While entropy can be a factor in determining the efficiency of a system. 2. The given statement "Entropy is directly proportional to the multiplicity of a system" is true. As the number of arrangements or possible states of a system increases, so does its multiplicity, which in turn increases the system's entropy.
1. False: Entropy is not related to work. Entropy can be defined as the amount of disorder in a system. On the other hand, work is defined as energy transferred due to the application of force over a certain distance. While entropy can be a factor in determining the efficiency of a system, it is not directly related to work.
2. True: Entropy is directly proportional to the multiplicity of a system. Multiplicity is a measure of the number of ways that a system can be arranged while maintaining a constant energy level.
As the number of arrangements or possible states of a system increases, so does its multiplicity, which in turn increases the system's entropy.
This relationship is captured by the second law of thermodynamics, which states that the entropy of a closed system always increases over time.
Therefore, it is true that entropy is directly proportional to the multiplicity of a system.
Read more about Entropy at https://brainly.com/question/17185767
#SPJ11
Provide the formula and name of a pure substance that has dipole-dipole interactinne Edit View Insert Format Tonle.
Formula of a pure substance that has dipole-dipole interaction is HF, hydrogen fluoride. Dipole-dipole interaction happens between polar covalent molecules, and it is an attractive force between the partially charged ends of the molecules.
A pure substance that has dipole-dipole interactions is hydrogen fluoride (HF). The interaction between dipole molecules can either be attraction or repulsion; attraction occurs when a positively charged end of a molecule attracts the negatively charged end of another molecule, and repulsion happens when similarly charged ends interact. A dipole molecule is formed by the separation of charges, and it results from a molecule that has polar covalent bonds with a significant difference in electronegativity values.
HF molecule has a dipole moment of 1.82D and is an example of a polar covalent molecule with an uneven distribution of electrons. It has a boiling point of -83.6°C, a melting point of -92°C, and a density of 1.15 g/cm³. The high boiling and melting points of HF are as a result of the dipole-dipole interaction, which is more significant than that of London forces.
Dipole-dipole interactions depend on the magnitude of the dipole moment and the distance between the molecules. If the dipole moment is high and the molecules are close, the interaction will be stronger. When dipole-dipole interactions are significant, the boiling and melting points of a substance are relatively higher.
Know more about Dipole here:
https://brainly.com/question/30889172
#SPJ11
Iodine- 131 undergoes beta emission with a decay constant of 0.08641/ days. If you start with 50.0mg of the I-131, how many days will it take for the amount of I-131 to drop to 17.5mg ?
The radioactive decay of I-131 with a decay constant of 0.08641/day indicates that it will take approximately 11.7 days for the amount to decrease from 50.0 mg to 17.5 mg.
To determine the number of days it will take for the amount of I-131 to drop from 50.0 mg to 17.5 mg, we can use the concept of radioactive decay and the decay constant.
The decay of a radioactive substance can be described using the exponential decay equation:
[tex]N(t) = N_0 \cdot e^{-\lambda t}[/tex]
Where:
N(t) is the amount of the substance at time t
N₀ is the initial amount of the substance
λ is the decay constant
t is the time in days
In this case, we have an initial amount of N₀ = 50.0 mg, and we want to find the time t when N(t) = 17.5 mg.
Using the equation, we can rearrange it to solve for time:
[tex]t = -\frac{1}{\lambda} \cdot \ln \left( \frac{N(t)}{N_0} \right)[/tex]
Plugging in the values:
λ = 0.08641 / days
N₀ = 50.0 mg
N(t) = 17.5 mg
[tex]t = -\frac{1}{0.08641} \cdot \ln \left( \frac{17.5}{50.0} \right)[/tex]
Using a calculator, we can evaluate the natural logarithm and calculate t:
[tex]t \approx -\frac{1}{0.08641} \cdot (-0.9590) \approx 11.7\text{ days}[/tex]
Therefore, it will take approximately 11.7 days for the amount of I-131 to drop from 50.0 mg to 17.5 mg.
To know more about radioactive decay refer here :
https://brainly.com/question/1770619#
#SPJ11
20 m| of diethy| ether is added to an Erlenmeyer flask containing a
NaCl salt. The flask is swirled for 2 minutes and the contents are
remains on the filter paper?
1. seprated salt
2. A mix of sand and salt
3.Nothing
The answer is 1. The salt will be separated from the mixture.
Diethyl ether is a nonpolar solvent, while NaCl is an ionic compound. When the diethyl ether is added to the mixture of NaCl and swirled, the ether will dissolve the NaCl due to its polar nature. The swirling helps in maximizing the contact between the solvent and the salt, facilitating the dissolution process.
However, when the mixture is filtered, the diethyl ether, being a volatile organic compound, will evaporate quickly, leaving behind the dissolved NaCl. The solvent evaporates because of its low boiling point and volatility, allowing the solid salt to remain on the filter paper.
As a result, the NaCl salt will be separated from the diethyl ether, forming a solid residue on the filter paper.
Therefore, option 1, "separated salt," is the correct answer.
learn more about salt here
https://brainly.com/question/5306491
#SPJ11
