A cantilever beam AB of length L has fixed support at A and spring support at B.
The spring behaves in a linearly elastic manner with stiffness k. If a concentrated
load P is applied at B, use any type of method to find:
(i) the force in the spring
Fb
,
(ii) the downward displacement
B 
of end B. (15%)

A Cantilever Beam AB Of Length L Has Fixed Support At A And Spring Support At B.The Spring Behaves In

Answers

Answer 1

The force in the spring will be [tex]F =\dfrac{KPl^3}{3EI}[/tex].

The deflection of the beam will be [tex]\rho[/tex] = [tex]0.15(\dfrac{KPL^3}{3EI})[/tex]

What is a cantilever beam?

A rigid, horizontally extending structural member known as a cantilever is supported at only one end. Typically, it extends from a solidly affixed flat vertical surface, such as a wall.

Given that:-

A cantilever beam AB of length L has fixed support at A and spring support at B.The spring behaves in a linearly elastic manner with stiffness k. If a concentrated load P is applied at B.

The spring force will be calculated as:-

[tex]F = kx[/tex]

Deflection will be given by:-

[tex]x = \dfrac{PL^3}{3EI}[/tex]

The spring force will be calculated by:-

[tex]F = \dfrac{KPL^3}{3EI}[/tex]

The deflection of the beam will be given as:-

[tex]\rho = \dfrac{0.15KPL^3}{3EI}[/tex]

Therefore the force in the spring will be [tex]F =\dfrac{KPl^3}{3EI}[/tex]..The deflection of the beam will be [tex]\rho[/tex] = [tex]0.15(\dfrac{KPL^3}{3EI})[/tex]

To know more about Cantilever beam follow

https://brainly.com/question/16791806

#SPJ1


Related Questions


Design a driver circuit that should drive a a seven segment to display octal numbers
[0 up to 7]. Your work should include the following steps
1) An appropriate title
2) The truth Table
3) Simplified expressions for the appropriate circuit
4) Logical circuit for the driver.​

Answers

Answer:

point hehe sorry sorry

Explanation:

I don't know

valocity and acceleration of spherical coordinates and polar coordinates with complete description and derivations?​

Answers

A point P at a time-varying position (r,θ,ϕ) ( r , θ , ϕ ) has position vector ⃗r , velocity ⃗v=˙⃗r v → = r → ˙ , and acceleration ⃗a=¨⃗r a → = r → ¨ given by the following expressions in spherical components.

in ipsec's __________ mode, the data within an ip packet is encrypted, but the header information is not.

Answers

In ipsec's TRANSPORT mode, the data within an ip packet is encrypted, but the header information is not.

What is ipsec's TRANSPORT mode?

IPSec transport mode is known to be often used if a given tunneling protocol (like GRE) is used to try and encapsulate the IP data packet, and later on, IPSec act as a form of protection for the GRE tunnel packets.

Therefore, In ipsec's TRANSPORT mode, the data within an ip packet is encrypted, but the header information is not.

Learn more about ipsec from

https://brainly.com/question/17299146

#SPJ11

When what is visible to end-users is a deviation from the specific or expected behavior, this is called:

Answers

When what is visible to end-users is a deviation from the specific or expected behavior, it's an error.

What is an error?

It should be noted that an error means a deviation from what's expected by an individual or programmer.

In this case, when what is visible to end-users is a deviation from the specific or expected behavior, it's an error. This is a deviation.

Learn more about error on:

brainly.com/question/16012410

#SPJ12

Technician A says that mechanical shifting controls can wear out over time. Technician B says that vacuum control rubber diaphragms can deteriorate over time. Who is correct

Answers

Based on the information, both technician A and technician B are correct.

How to depict the information?

From the information given, Technician A says that mechanical shifting controls can wear out over time.

Technician B says that vacuum control rubber diaphragms can deteriorate over time.

In this case, both technicians are correct as the information depicted is true.

Learn more about technicians on:

brainly.com/question/1548867

#SPJ12

What is software certification? Discuss its importance in the changing scenario of software industry. ​

Answers

The software industry is evolving, and software certification is crucial. ​Software certification is a digitally signed certificate that verifies the identification of an individual or company. ​

What is software certification?

A certificate, sometimes known as a digital certificate, is a special document that has been digitally signed and authenticates the identity of a person or business.

Its validity may be checked using public-key cryptography to make sure that the program or website you are accessing is reliable.

Software developers must demonstrate that their program executes the XBRL conformance suites successfully in order to be certified.

They must also supply extra test cases so that XBRL employees can test the program further. The validity of certification is one year, renewable yearly.

Hence the software industry is evolving, and software certification is crucial. ​

To learn more about the software certification refer;

https://brainly.com/question/11299456

#SPJ1

Technician A uses heat shrink tubing to insulate and seal soldered wire connections. Technician B wraps the soldered connection with electrical tape. Who is correct

Answers

The technician that's correct is Technician A.

Who is a technician?

A technician is an individual that's employed to look after the technical equipments in an organization.

In this case, Technician A uses heat shrink tubing to insulate and seal soldered wire connections. He is correct.

Learn more about technicians on:

brainly.com/question/1548867

#SPJ12

How many gyros and how many accelerometers are in the INS?

Answers

The number of gyros and accelerometers that are in the INS are three (3) gyros and two (2) accelerometers respectively.

What is INS?

INS is abbreviation for Inertial Navigation System and it can be defined as a navigation device that is designed and developed to use motion sensors, a computer, and rotation sensors, so as to continuously calculate by dead reckoning the velocity, position, and orientation of a moving object.

Based on scientific information and records, the number of gyros and accelerometers that are in the INS are three (3) gyros and two (2) accelerometers respectively.

Read more on Inertial Navigation System here: https://brainly.com/question/26052911

#SPJ12

The following is a dump of a udp header in hexadecimal format. 0632000d 001ce217 a. what is the source port number? b. what is the destination port number? c. what is the total length of the user datagram? d. what is the length of the data? e. is the packet directed from a client to a server or vice versa? f. what is the client process?

Answers

The source port number of the dump given above is 1586. The destination port number is given below.

What is the destination port number?

The destination port number is given as 000DH = 13. Destination port number is determined by running the following command in the Command Prompt: netstat-a

Then you hit the enter button.

What is the total length of the user datagram?

The total length of the datagram is given as 001CH = 28 bytes. Datagram is a form of message that is self-contained, that is relayed over the network. It must be noted that it's content cannot be guaranteed.

What is the length of the data?

The length of the data is 20 bytes. This is arrived at by computing the following:

Data Lenght - Header

= 28 - 8

= 20bytes.

Is the packet directed from a client to a server or vice versa?

It is to be noted that the packet is directed from the client to the sever.

Learn more about ports at;
https://brainly.com/question/18133590
#SPJ1

Why can’t we find all errors before we give the software to our customers?

Answers

Explanation:

what is protozoa define it with diagram srt-nhev-mvp

i m n * de

Engine vacuum is being discussed. Technician A says that when the engine is operating under light loads, engine vacuum is low. Technician B says that engine vacuum is high when the engine is operated under heavy loads. Who is correct

Answers

Neither of the two technicians (Technician A and Technician B) is correct.

What is an engine vacuum?

An engine vacuum can be defined as a type of engine which is designed and developed to derive its force from air pressure that's being pushed against one side of the piston of an automobile, while having a partial vacuum on the other side.

In this scenario, we can infer and logically conclude that neither of the two technicians (Technician A and Technician B) is correct because engine vacuum is high when the engine is operating under light loads and vice-versa.

Read more on engine vacuum here: https://brainly.com/question/14602340

#SPJ12

Draw a circuit diagram connected in a reverse bias showing a p-n material and a battery

Answers

The Circuit Diagram is connected in a reverse bias attached below.

What is Reverse Bias?

Reverse biased p-n junction diode refers to the method by which a p-n junction diode stops electric current in the presence of applied voltage.

The positive terminal of the battery is connected to the n-type semiconductor material in a reverse biased p-n junction diode, while the negative terminal is connected to the p-type semiconductor material.

Learn more about Reverse biased here:

https://brainly.com/question/14703617

#SPJ1

the best way to complete a turn requires that you

Answers

The best way to complete a turn needs that a person accelerate slowly about halfway through the turn.

What should you do when preparing to turn?

If a person wants to prepare to turn,  a person need to lower their speed and stay by the far right as soonest.

Therefore, The best way to complete a turn needs that a person accelerate slowly about halfway through the turn.

Learn more about completing a turn from

https://brainly.com/question/595995

#SPJ11

Where a solid wood door is installed as a permitted opening between a garage and a residence, the minimum thickness of the door shallbe __________ inches.

Answers

For a garage and a residence, the minimum thickness of a solid wood door that is installed as a permitted opening shall be 1 3/8 inches.

What is a door?

A door can be defined as a solid material made of wood or metal, which is designed and developed to facilitate entrance and exit out of a building.

According to the International Residential Code (IRC), the minimum thickness of a solid wood door that is installed as a permitted opening for a garage and a residence shall be 1 3/8 inches.

Read more on doors here: https://brainly.com/question/22731237

#SPJ12

3. You were given the opportunity to be a project manager for Apple to work on a new product. Provide me with details on what that product is ( you make it up ), how will you approach the work and find resources for it.

Answers

You were given the opportunity to be a project manager for Apple to work on a new product by Product control examples additionally consist of the branding and consumer conversation.

What makes you a very good mission supervisor?

Good mission managers recognize and recognize their marketplace and the enterprise in their projects. They look at the opposition and compare alternatives. A desirable mission supervisor remains updated at the brand new developments withinside the enterprise in their mission, and they show off a stable knowledge and know-how in their enterprise.

Product control examples additionally consist of the branding and consumer conversation required to release a brand new product. Each product, in its nascent form, calls for right branding. This creates recognition approximately the product withinside the marketplace. Advertising and PR managing additionally fall beneath neath the umbrella of product control.

Read more about the manager:

https://brainly.com/question/24553900

#SPJ1

As described by Bronfenbrenner, the environmental system that consists of links between microsystems is the

Answers

As described by Bronfenbrenner, the environmental system that consists of links between microsystems is the mexosystem.

What is a microsystem?

It should be noted that a microsystem simply means ten pattern of activities that's expressed by an individual in a setting.

In this case, as described by Bronfenbrenner, the environmental system that consists of links between microsystems is the mexosystem.

Learn more about microsystems on:

brainly.com/question/15727382

#SPJ12

Six 20 watt, 12-volt luminaires (lighting fixtures) are supplied from a small, 12-volt transformer that is 60 feet away from the fixtures. the wire used is 14 awg. what is the voltage applied to the fixtures? use k = 11.6.

Answers

If the wire used is 14 awg. The voltage applied to the fixtures is: 8.61 volts.

Voltage applied to the fixtures

First step is to calculate the amperes using this formula

I = P ÷ E

Where:

I =load current (amperes)=?

P =Product of voltage=(6)(20)

E =Electrical circuit's=12

Let plug in the formula

I= (6)(20) ÷ 12

I=120÷12

I= 10 amps

Second step is to calculate the Voltage drop

Using this formula

Vd = [2KIL] ÷ CMA

Where:

Vd= Voltage drop( volts)=?

K=Direct current constant=11.6

I=Load current (amperes)= 10 amps

L =Length in feet=60 feet

CMA=Circular mill area= 4110

Let plug in the formula

Vd= [(2)(11.6)(10)(60)] ÷ 4110

Vd=13,920÷4110

Vd= 3.3869 volts

Third step is to calculate Voltage at fixture

Voltage at fixtures=Electrical circuit's-Voltage drop

Voltage at fixtures=12 - 3.3869

Voltage at fixtures=8.6131 volts

Voltage at fixtures=8.61 volts (Approximately)

Therefore the voltage applied to the fixtures is: 8.61 volts.

Learn more about voltage  here:https://brainly.com/question/26523307

#SPJ1

when electric power is transmitted over long distance, line losses can be reduced by generating AC rather than DC voltage and by transmitting?

Answers

When electric power is transferred over a long distance then, line loss can be reduced by high voltage and low current. Thus, option A is correct.

What is electric power?

The complete question is attached to the image below.

The electric circuit transfers the electric current then it is called electric power. The loss in the line over a larger distance is reduced by transferring AC instead of DC voltage.

The AC transmitted is of high voltage, and the power is low. The equation for current is given,

P = VI

The increase in the voltage causes the decrease in the current and in turn the resistance also reduces resulting in the loss of the power of the circuit to decrease.

Therefore, the loss is reduced by transferring high voltage and, low current AC.

Learn more about high volatge AC here:

https://brainly.com/question/18069892

#SPJ1

An Exterior Insulation Finish System (EIFS) shall terminate a minimum ___________ inches above the finished ground level.

Answers

Answer:

An Exterior Insulation Finish System (EIFS) shall terminate a minimum 6 inches above the finished ground level.

Tech A says that on the full floating axle, there are two tapered roller bearings between the hub and the outside of the axle housing. Tech B says that a semi-floating axle, the axle supports the weight of the vehicle and is also subject to bending forces as the vehicle corners. Who is correct

Answers

The information depicted shows that both technicians are correct.

Who is a technician?

This is an individual who overlooks the technical equipment in an organization.

In this case, on the full floating axle, there are two tapered roller bearings between the hub and the outside of the axle housing.

Also in a semi-floating axle, the axle supports the weight of the vehicle and is also subject to bending forces as the vehicle corners.

Therefore, they're both correct.

Learn more about technicians on:

brainly.com/question/1548867

#SPJ12

A feature control frame must be connected to

Answers

Answer:

Surface Parallelism When a surface is to be parallel to a datum plane, the feature control frame is connected by a leader to the surface, or to an extension line from the surface.

Explanation:

The A/C compressor will not engage when the A/C is turned on. The static refrigerant pressure is 75 psi and the outside temperature is 72 degrees F. Technician A says that a poor connection at the pressure cycling switch could be the cause. Technician B says that a faulty A/C clutch coil could be the cause. Who is correct

Answers

In the case above,  poor connection at the pressure cycling switch  and also a faulty A/C clutch coil could be the cause.

What is likely the reason when an A/C compressor will not engage if A/C is turned on?

The cause that hinders the A/C Compressor from engaging are:

Due to low pressure lockout.Due to a poor groundDue to bad clutch coil.Dur to an opening in the wire that links to the clutch coil.Due to a blown fuse.

Note that the pressure switches is known to be one that control the on/off function of any kind of AC compressor and as such, if there is switch failure, it can hinder the AC compressor from functioning at all.

Therefore, technician A and B are correct.

Learn more about refrigerant pressure from

https://brainly.com/question/10054719

#SPJ1

Besides hev and ev motor systems themselves what other systems may use high voltage

Answers

Besides hev and ev motor systems themselves what other systems may use high voltage are the air conditioning compressor, auxiliary battery, and water pump.

Why an excessive voltage is used?

High voltages are utilized in transmission structures due to the fact a better voltage implies a decrease modern-day for a given energy of transmission. With a decrease modern-day, much less warmth is generated withinside the transmission traces and so much less electricity is wasted. Furthermore, it has superb environmental benefits.

To come up with a difficult estimate the common rated energy of the water pump is from 250 watts to 1500 watts. The smaller the water pump, much less is the wattage, much less is the energy consumption, subsequently low is the release and head.Usually, an auxiliary deliver is energy delivery that gives an auxiliary voltage. An instance will clean this up. Say you've got got a switching circuit with score of 220VAC enter and 12VDC output. Enclosure air conditioners may be designed to run on AC and DC voltages. The AC versions perform at 120, 230, 380, 400, 480, 575 and six hundred V at frequencies of 60 and/or 50 Hz.

Read more about the voltage:

https://brainly.com/question/1176850

#SPJ1

The local interlock system on a hybrid vehicle detects when ________ have been removed from high-voltage circuits.

Answers

The local interlock system on a hybrid vehicle detects when covers have been removed from high-voltage circuits.

What is a hybrid vehicle?

A hybrid vehicle can be defined as a mechanical system that is designed and developed to use multiple sources of power such as fuel and batteries, so as to enable it move from one point to another.

By design, the local interlock system on a hybrid vehicle is designed and developed to detect when covers have been removed from high-voltage circuits.

Read more on hybrid vehicle here: https://brainly.com/question/3535024

#SPJ1

The system dependent (passive) recovery process; A) never needs the use of a pump or heat to recover refrigerant. B) must use a pressure relief device to protect the technician and equipment. C) recovers refrigerant in a non-pressurized container. D) can only be performed on a system with an operating compressor.

Answers

Answer:

C) recovers refrigerant in a non-pressurized container

The system dependent (passive) recovery process recovers refrigerant in a non-pressurized container. The correct option is C.

A way of recovering refrigerant from a system without using a pump or heat is known as a system-dependent (passive) recovery process.

Instead, it relies on the system's normal pressure and temperature variations to speed up the recovery process.

A non-pressurized container is commonly connected to the system using this technique, and the refrigerant is then passively allowed to flow inside the container.

The system-dependent recovery procedure, according to Option C, recovers refrigerant in a non-pressurized container.

It entails that the refrigerant is gathered in a container without the need of a pump or additional pressure.

Thus, the correct option is C.

For more details regarding refrigerant, visit:

https://brainly.com/question/13002119

#SPJ6

the ____ grinder provides more precise x- and y-axis movements than a vertical milling machine for extremely accurate positioning

Answers

Answer:

the jig grinder provides more precise x- and y-axis movements than a vertical milling machine for extremely accurate positioning

an incorrect way of handling disposable gloves includes

Answers

The incorrect way of handling disposable gloves are as follows;

Blow into themHold them by the fingersRoll them onto the hands

What are disposable gloves?

Disposable gloves are gloves that you use one time and then throw away.

They are usually transparent and made of nitrile, latex, or vinyl.

They are usually tough to withstand liquids and chemicals.

Therefore, the incorrect way of handling them includes the following;

Blow into themHold them by the fingersRoll them onto the hands

learn more on disposable gloves here: https://brainly.com/question/24012826

#SPJ11

Determine the general lighting load for a two-story office building that measures 125 feet by 150 feet.

Answers

The general lighting load for a two-story office building that measures 125 feet by 150 feet is 112, 500 sq ft.

What is lighting load?

Lighting loads are the energy used to power electric lights and they make up nearly a third of US commercial building energy use.

Lighting load = n(LW)

where;

L is length of the buildingW is width of the buildingn is number of story building

For one story building, = 3

For two story building, n = 6

Lighting load = 6 x 125 x 150 = 112, 500 sq ft.

Learn more about lighting load here: https://brainly.com/question/14070748

#SPJ12

The results of a _________ test will determine if there is suitable drainage and the size of the drain field that will be required for a septic system.

Answers

Answer:

The results of a percolation test will determine if there is suitable drainage and the size of the drain field that will be required for a septic system.

Check the level of motor oil in your engine by ?

Answers

Answer:

cpct gvxjjxjhdfjokjdzfjiyddzzsjhxf

Other Questions
15. Read the following paragraph and complete the sentence below. Grace had something to say about everything and everyone. Some of her friends teased her, saying Grace never left a word unspoken. Then, one day, Grace's history teacher complained to the principal, saying Grace was so garrulous that she often disrupted the class. Grace was called to the principal's office that very day. She was told she would be required to meet with the school counselor. Grace was required to meet with the school counselor because she was A. a smart mouth . B. impolite to her friends . C. opinionated . D. very talkative . In 1861, many did not believe the Civil War would last long; however Which country trio had to apologize for abruptly ending a show in indianapolis after 30 minutes?. What should be used to prevent javascript from accessing a session id value?. Describe the life cycle of mushroom with pictures If each pound of beef costs $3.69, how much does 2 pounds cost? Round to the nearest cent. Kyle borrows $25000 at 6% p.a. simple interest for four years. Calculate the monthly repayment required to pay this loan off in 48 equal instalments. Ram eats rice (negative) What do felicitated the fusion an active transport have in common ProblemSuppose that J is between H and K. If HJ=2x+4, JK=3x+3, and KH=22, find the lengths of HJ and JK. Remember to always draw an image first and to pay attention to what the question is asking for!SolutionFind the Segment Addition PostulateUse the Segment Addition Postulate and then substitute what we know. Do not use any spaces in your answers.HJ+JK= Answer( Answer )+( Answer )= AnswerFind xOnce we combine our like terms we get:Answer x+ Answer = Answerx= AnswerFind HJ and JKOur questions asked us for the lengths of HJ and JK so we must plug in the value of x to solve for those values. We were given HJ=2x+4 and JK=3x+3. HJ=2x+4HJ=2( Answer )+4HJ= AnswerAndJK=3x+3JK=3( Answer )+3JK= Answer3x-4Check WorkView checked work To solve the equation -2x-x+1=0 using the quadratic formula, what would be the value of b?0-2-11 A function is a rule thats assigns each value of the independent variable to exactly ____ value of he dependent variable.Free response: Which of the following correctly defines emotions? Group of answer choices Emotions are the cluster of beliefs, assessed feelings, and behavioral intentions toward a person, object, or event which is called an attitude object. Emotions are physiological, behavioral, and psychological episodes experienced toward an object, person, or event that create a state of readiness. Emotions are feelings that are not directed toward anything in particular. Emotions are judgments about what is right or wrong. Perform online or offline research to learn more about the social movements in the United States. Write a note on any one social movement of your choice explaining the causes and consequences of the movement. Also, mention the main leaders, their ideologies, and teaching, etc. 100 pts if correct Kublai Khan increased the Mongol Empire, but didn't capture Japan. PLEASE HURRY!!!!!!!!!!!!!!!!!!!!!!!! A friend of yours was interested in determining whether the news media noticed campus events. Your friend decided to do a content analysis of the local paper.Your friend counted each story that mentioned his university's name. At the end of two months, 136 events had been counted. Your friend asked for your comments on his research. You told your friend: You are advising the owner of Smalltown Computer, a new, local computer repair store that also builds custom computers to order. What competitive strategies could Smalltown Computer exert? Which ones will it have difficulty exercising? One of your patients, 11-year-old Elizabeth, has recently been diagnosed with diabetes. She is feeling isolated and upset about the changes she is facing in her life. What are some ways you can help Elizabeth adjust to her diagnosis? What social options could you offer to Elizabeth to help her feel less isolated? Enumerate the 6 main shortcomings the compnents of satellite communication