The initial velocity of the car is 17 meters per second. It is accelerated at 3m/s^/2.
What is the best way to define acceleration?Acceleration is the rate of change in both speed and direction of velocity over time. When anything moves faster or slower in a straight line, it is said to have been accelerated. Because the direction is always shifting, motion on a circle accelerates even while the speed is constant.
Given -
A car moving on a straight road at 5 m/s.
It is accelerated at 3 m/s^2.
The first equation of motion is,
v = u + at
It gives the velocity acquired by a body in time t.
Here,
initial velocity = u
acceleration = a
time = t
final velocity = v
Therefore, now putting up the values.
v = u + at
→ u = 5 m/s
→ a = 3 m/s²
→ t = 4 sec
⇒ v = 5 + 3 × 4
⇒ v = 5 + 12
⇒ v = 17 m/s.
Thus, the initial velocity of the car is 17 meters per second.
To know more about velocity visit:
brainly.com/question/18084516
#SPJ4
if we are not supposed to charge liquid into the low side, and we have an operating system that we need to add some refrigerant to, the high side pressure will be greater than the tank pressure, so how can we add refrigerant into the system with a refrigerant blend like r-404a that must be charged as a liquid?
R410A and 404A blends must be supplied to a systems as liquids. R22 and other pure refrigerants can be added as liquid or vapor. If you're adding liquid to the suction line, do it gradually to prevent sluggish operation of the compressor or dilution and contamination of the compressor oil.
How is r404a refrigerant charged?There is no dip tube on the 404a. The bottle MUST be turned over down in order to be charged as a liquids. If you keep it standing, you will charge like a gas and alter the refrigerant's characteristics, creating a whole new set of problems for yourself.
How is liquid refrigerant charged?When the necessary vacuum level is obtained for systems operating in a vacuum, the vacuum always charge coolant on the high end of the partition until low and high side pressure equalize as well as fluids quits flowing after the pump has been disconnected from the system and all leaks have been fixed.
To know more about r404 visit:
https://brainly.com/question/17174463
#SPJ4
A point charge qı = -4.00 nC is at the point x = 0.60 m, y = 0.80 m, and a second charge q2 = +6.00 nC is at the point x = 0.60 m, y = 0
Calculate the direction of the net electric field at the origin due to these two point charges.
φ = .... ?
The direction of the net electric field at the origin due to these two point charges is 77.4°.
What is electric field?The physical field that encircles electrically charged particles and exerts force on all other charged particles with in field, either attracting or repelling them, is known as an electric field. It also describes the physical field of a system of charged particles. Electric charges and time-varying electric currents are the basis of electric fields. The electromagnetic field, one of the four basic interactions of nature, manifests itself in both electric and magnetic fields.
Electric fields play a significant role in many branches of physics and are used in electrical engineering. For instance, in atomic physics and chemistry, the electric field acts as the attractive force that holds the atomic nucleus and electrons together in atoms. It is also the force that causes atoms to bond chemically to form molecules.
Part A
The equation for the magnitude of the electric field at the origin for both points is given by:
[tex]$E=\frac{k q}{r^2}[/tex]
[tex]$$Substituting in the appropriate values for each charge yields$$E_1=\frac{\left(8.99 \times 10^9\right)\left(4 \times 10^{-9}\right)}{\left.\sqrt{0.6^2+0.8^2}\right)^2}=35.9 \mathrm{~N} / \mathrm{C}$$The charge is located at an angle of $\theta=\tan ^{-1} \frac{0.8}{0.6}=53.1^{\circ}$ this means $\mathrm{i}$ and $\mathrm{j}$ components for $E_1$$$\begin{aligned}& E_{1 i}=35.9 \cos 53.1=21.5 i \mathrm{~N} / \mathrm{C} \\& E_{1 j}=35.9 \sin 53.1=28.7 j \mathrm{~N} / \mathrm{C}\end{aligned}[/tex]
[tex]$$Since $E_2$ is directly on the axis it can be calculated as:$$E_2=\frac{\left(8.99 \times 10^9\right)\left(6 \times 10^{-9}\right)}{\left.\sqrt{0.6^2}\right)^2}=149.8 \mathrm{i} \mathrm{N} / \mathrm{C}$$The net field is$$E=E_1+E_2=-21.5 i+28.7 j+149.8 i=128.3 i+28.7 j$$The magnitude is thus:$$\sqrt{128.3^2+28.7^2}=131.4 \mathrm{~N} / \mathrm{C}$$Part BThe direction is:$$\theta=\tan ^{-1} \frac{128.3}{28.7}=77.4^{\circ}$$[/tex]
Thus, the direction of the net electric field at the origin due to these two point charges is 77.4°.
Learn more about electric fields
https://brainly.com/question/15800304
#SPJ4
universe, provides a constant outward force that does not dilute as the universe expands. Pitted against this relentless push is the gravitational pull from the rest of the matter and energy in the universe. Early on, the universe was much denser than it is today
When scientists refer to the cosmos as expanding, they indicate that it has been expanding ever since the Big Bang, when the universe first began. Outside of our own galaxy, the galaxies are veering away from us.
What three sorts of universes are there?The universe can have one of three fundamental forms: a flat one with Euclidean or zero curvature, a spherical one with positive curvature, or an open one with hyperbolic curvature (negative curvature).
What is bigger than the universe?No, the universe contains every galaxy and solar system known to us. While the universe as a whole is composed of billions of galaxies, the Milky Way Galaxy alone includes hundreds of billions of stars, including our Sun.
To know more about universe visit:
https://brainly.com/question/9724831
#SPJ4
compared to its average speed in air, the average speed of a beam of light in glass is
A) the same. B) more. C) less.
"Compared to its average speed in air, the average speed of a beam of light in glass is less."
The expression for refractive index of a medium is given as, μ = c/ν
where,
μ is the refractive index of the medium
c is speed of light in the vacuum
ν is the speed in the medium of refractive index μ
As, the speed of light in vacuum is constant, μ ∝ 1/ν
Any media's refractive index and the speed of light in that medium are inversely related. Given that glass has a greater refractive index than air, light travels slower through glass than through air. So, option (A) and (B) are incorrect and option (C) is correct.
To learn more about speeds:
https://brainly.com/question/28779711
#SPJ4
a spacecraft of dry weight 50,000 lbf leaves earth with 180,000 lbf of fuel on board and flies to a planet where the acceleration due to gravity is 12 ft/s2. during the flight to the planet, 2/3 of the fuel is consumed. how much thrust does the rocket need to insure liftoff from the planet?
Weight must be larger than thrust. Consider a missile with a payload of 10 kg as an illustration. It is being pulled downward by gravity with a force of 10 x 9.8, or 98 N. The force must be more that 98 N in order to lift the rocket off of the launch pad.
How are rockets able to take off from Earth?The rocket is still being dragged downward by Earth's gravity. Thrust is the upward force produced when a rocket consumes propellants and exhales. The rockets needs enough propellants before launch so that the gravity force pulling the rocket down is higher than the thrust propelling the rocket upward.
What speed must a rocket travel at in order to launch itself into space?Escape velocity is the speed of around 11 km per s required to escape the gravity of our planet.
To know more about thrust visit:
https://brainly.com/question/28429245
#SPJ4
dave throws a ball upward with an initial velocity of 23 ft per second. the ball initially leaves his hand 5ft. above the ground and eventually falls back the ground. in parys (a)-(d), you will answer the following questions: what is the maximum height reached by the ball? after how many seconds will the ball reach its maximum height? how long will it take to reach the ground?
The maximum height reached by the ball is 5.75ft , the time taken by the ball to reach is 0.71 sec and the time taken to reach the ground is 0.90 sec.
What is law of gravity?
Every particle in the universe attracts every other particle with a force that is proportional to the product of their masses and inversely proportional to the square of the distance between their centers, according to Newton's law of universal gravitation.
a) The maximum height reached by the ball can be calculated using the formula: h = vi^2/2g + h0, where h is the maximum height, vi is the initial velocity (23 ft/s), g is the acceleration due to gravity (-32 ft/s^2), and h0 is the initial height (5 ft). Plugging in these values, we get:
h = (23^2)/(2*-32) + 5 = 5.75 ft.
b) The time it takes for the ball to reach its maximum height can be calculated using the formula: t = -vi/g, where t is the time and vi and g have the same meanings as above. Plugging in the values, we get:
t = -23/(-32) = 0.71875 seconds.
c) The time it takes for the ball to fall back to the ground can be calculated using the formula: t = 2h/g, where h is the maximum height and g has the same meaning as above. Plugging in the values, we get:
t = 25.75/(-32) = 0.90625 seconds.
To know more about gravitational force, visit:
brainly.com/question/12528243
#SPJ4
a parking brake select one: a. is used to secure a vehicle when parked. b. can be called an emergency brake because it will always stop you if your brakes fail. c. is used to secure a vehicle only when parked on a steep incline. d. will not allow a vehicle to move if in place.
A parking brake select one , can be called an emergency brake because it will always stop you if your brakes fail.
What's the difference between break and brake?Break means to cause something to separate into pieces, either by violently hitting it or dropping it. Brake refers to a device used to reduce the speed of a moving vehicle or to stop it by pressing it.
Which one is the brake?Just below the steering wheel, you'll generally find two pedals. The brake pedal is on the left side regardless of whether it is a left or right-hand drive car. You have to depress the brake to slow down or bring your car to a halt.
To know more about brake visit
https://brainly.com/question/13084610
#SPJ4
The radius of a sphere is increasing at a rate of 2 mm/s. How fast is the volume increasing when the diameter is 80 mm?.
Answer:
V = 4/3 π R^3 = 4/3 π (D/2)^3 = 1/6 π D^3
dV / dD = 1/2 π D^2 rate of change of volume related to diameter
dV = 1/2 π D^2 dD
dV = 1/2 π 80^2 * 4 mm^3 the radius increases at 1/2 the speed of the diameter
dV = 40,200 mm^3/s
where i0 is the intensity of the incident light and i is the intensity of light that emerges. find the concentration of the substance if the intensity i is 60% of i0. (round your answer to two decimal places.)
The concentration of the substance if the intensity i is 60% of i0 is found to be 1275 mol/L.
What connection exists between photon concentration and photon intensity?The Beer-Lambert law, which connects the attenuation of light to a material's qualities, best explains the relationship between concentration and absorbance. According to the Beer-Lambert rule, a chemical solution's concentration is inversely related to how much light it can absorb.
Io => intensity of the incident light
I => intensity of light that emerges
I = 60/100 x Io
=> 0.6Io
Concentration => -2500 ln(I/Io)
=> -2500 ln(0.6)
=> 1275 mol/L
What is the name for light's intensity?The amount of visible light emitted in a unit of time per solid angle is called luminous intensity. The lumen is the term used to describe the amount of light that comes from a source in a single second (also known as the luminous power or luminous flux).
Learn more about intensity here:
brainly.com/question/28192855
#SPJ4
Please help, thank you!
In an experiment to create a pendulum, each member of the group measured the length of the string to be a slightly different value. How do we describe these small differences when reporting the length?
A.) Precision
B.) Accuracy
C.) Systematic Uncertainty
D.) Random Uncertainty
When the length of each member in an experiment to build a pendulum is measured using a separate value, the random uncertainty is what accounts for the little discrepancies in length reporting.
What exactly is random uncertainty?These are mistakes that are regularly made during an experiment due to poor design, an inherent flaw, or a constraint in the instrument. They could also be the result of subpar experimental methods.
Both a comprehensive quantification of these flaws and the improvement of experiment reliability by repetition are impossible. However, they can be enhanced by altering the experimental strategy, enhancing the measurement methods, etc.
To know more about random uncertainty, visit:
https://brainly.com/question/29015738
#SPJ4
What is the relation of the colour with that of the capacity of the absorpttion of heat? Explain with an example.
Answer:
Explanation:
When an object appears of a certain color, when white light falls into it and illuminates it. It simply means that it is reflecting the light of that color and it has absorbed all other colors.
For example, the leaves are reflecting green light as it absorbs all other colors of light.
The more light the object absorbs, the more heat is absorbed since light is energy. If you consider it a color, black absorbs the most heat.
Another example is; You must have heard people saying don't wear black in the summers, it is because black color absorbs all wavelengths of light and reflects none.
Whereas, all the white-colored objects reflect all wavelengths of light and therefore absorb the least heat. Taking the earlier example, light-colored clothes are preferred to be worn in summer to stay cooler as they absorb the least amount of heat.
if a car generates 16.0 hp when traveling at a steady 103 km/h, what must be the average force exerted on the car due to friction and air resistance?
The response to the question is that the average force caused by frictional and air resistance on an automobile is 417.02N.
What in science is a force?The term "force" has a particular definition in science. At this level, calling a force a pushing or a pull is quite appropriate. A force isn't something an item "has in it" or that it "contains." One thing receives a force from another. There are both living things and non-living objects in the notion of a force.
Given that,
The power generated, P = 16 hp = 11931.19 W
Speed of the car, v = 103 km/h = 28.61 m/s
We need to find the average force exerted on the car due to friction and air resistance.
We know that,
Power, P = F v
Where,
F is force exerted on the car
F = P/V
= 11931.19/28.61
= 417.02N
To know more about force visit:
https://brainly.com/question/24178568
#SPJ4
a heavy machine, weighing 3000 n, is supported on a resilient foundation. the static deflection of the foundation due to the weight of the machine is found to be 7.5 cm. it is observed that the machine vibrates with an amplitude of 1 cm when the base of the foundation is subjected to harmonic oscillation at the undamped natural frequency of the system with an amplitude of 0.25 cm. find a. the damping constant of the foundation, b. the dynamic force amplitude on the base, and c. the amplitude of the displacement of the machine relative to the base.
A 3000 N heavy machine is supported on the a robust foundation. The machine's weight is found to cause a static displacement of the foundation.
Why is static important?
adjective Also called "statistical," this term refers to something that is fixed or stationary. exhibiting minimal or no change a static idea; a static connection. deficient in activity, growth, or vitality: Characterizations in the work were static, especially in regard to its main characters.
What is static, anyway?
An imbalance of electrostatic force within or on surface of a material, or between materials, results in static electricity. The charge persists until it can be expelled through an electrical discharge or current.
To know more about static visti:
https://brainly.com/question/26609519
#SPJ4
When the surroundings did 75 kj of work on a system, its internal energy increased by 45 kj. how much energy did the system gain or lose as heat?
The required amount of heat energy lost in a system when surroundings performed certain amount of work and when internal energy is increased is calculated to be - 30 kJ.
Given that,
Work done on the system w = 75 kJ
Internal energy ΔU is increased by 45 kJ
Heat energy q lost or gained by the system = ?
From the first law of thermodynamics, mathematically, expression can be written as, ΔU = q + w
q = ΔU - w = 45 kJ - 75 kJ = - 30 kJ
The negative sign indicates that the heat energy is lost.
Thus, the amount of heat energy lost in the system is - 30 kJ.
To know more about energy:
https://brainly.com/question/12241002
#SPJ4
for the second overtone standing wave the node-to-node distance is 8.00 cm . what is the length of the string? express your answer with the appropriate units.
The string is 24 cm long. The node-to-node spacing during the second overtone standing wave is 8.00 cm.
What is standing wave?Two waves with the same frequency and amplitude that are traveling in opposing directions and interfere with one another create a standing wave. It has some places (referred to as nodes) where the amplitude is consistently zero and other spots (referred to as antinodes) where the amplitude fluctuates most intensely.
In order to produce a tone, a standing wave in a musical instrument enables constancy and predictability of the wave. A standing wave is "caught" by resonance in a resonating chamber in wind instruments and in string instruments.
Node to node distance, d is 8 cm.
n = 3
length, L = nλ/2
L = 3 × 8
∴ L = 24 cm
To know more about standing wave, visit:
https://brainly.com/question/14176146
#SPJ4
1 . After watching the video of how the Titanic sank, please explain with two to three sentences why the bow (front) of the ship went into the water before the rest of the ship.
2 . The video of the Titanic sinking shows that the ship broke into two parts. Why do you think that this happened? What forces were working on the stern (back) of the ship while it was up in the air? Please answer in two to three complete sentences with good grammar.
The bow (front) of the ship went into the water before the rest of the ship due to the weight of the water filled in the ship.
1. The Titanic struck an iceberg, which caused the bow of the ship to flood with water. As the water filled the front compartments of the ship, the weight of the water caused the bow to sink first, pulling the rest of the ship down with it.
2. The ship broke in two as a result of the immense stress placed on the ship's structure as the bow submerged and the stern rose out of the water. The forces of the water rushing into the ship, coupled with the weight of the stern pulling the ship apart, ultimately caused the ship to break in half. Additionally, as the ship sank, the buoyancy of the stern of the ship was lost, making it vulnerable to the forces of the water, which caused the ship to fracture.
Learn more about weight of the water:
https://brainly.com/question/28960675
#SPJ4
Q1. a student is swinging a 200 g yo-yo on a 1.0 m long string. how fast must
the yo-yo be moving at the bottom of the circle to reach the top of the circle
with no speed?
The tha is moving through the center of the circles at a speed of 4.43 m/s. The yo-yo must run scooper down the bottom in order to reach the summit without losing any speed after slowing to a halt
Is "moving" synonymous with "accelerating"?Acceleration is the broad name for any process where the velocity changes. There are only two ways to ramp up: changing the pace, changing your direction, or changing both. This is because velocity is a product of both speed.
Calculation
The potential energy of the yo-yo at the top of the circle is:
PE = m * g * h
= (200 g) * (9.8 m/s^2) * (1.0 m)
= 1960 J
KE = 1/2 * m *
Thus, we can set these two expressions equal to each other and solve for the speed of the yo-yo:
1960 J = 1/2 * (200 g) *
v =√3920/200
v = √19,6
v = 4.43 m/s
To know more about accelerate visit
https://brainly.com/question/30106771
#SPJ4
which number is the systolic pressure and what is it measuring?
Systolic pressure is the top number in a blood pressure reading and it is usually measured in millimeters of mercury (mm Hg). It measures the pressure in the arteries when the heart beats and pumps blood out to the rest of the body.
What is Systolic pressure?Systolic blood pressure is the maximum pressure of blood in the arteries during a heartbeat. It is the top number in a blood pressure reading, usually written as two numbers separated by a slash. The systolic pressure is a measure of the force with which the heart pumps blood around the body and is the highest pressure reached in the arteries when the ventricles are squeezing. The systolic pressure is a measure of how much pressure is required to push the blood around the body and can be affected by lifestyle, age and other health factors.
To learn more about Systolic pressure
https://brainly.com/question/15170210
#SPJ4
monochromatic light incident on a metal surface emits electrons with kinetic energies from zero to 2.6 ev. what is the least energy of the incident photon if the tightly bound electron needs 4.2 ev to remove?
The least energy of the incident photon if the tightly bound electron by the photoelectric effect needs 4.2 ev to remove is 6.8eV
When light with a high enough frequency is impacted upon a metal surface, a phenomena known as the photoelectric effect occurs when electrons are released from the metal surface. Heinrich Hertz first described the idea of the photoelectric effect in 1887, and Lenard followed in 1902. But Maxwell's idea of light as an electromagnetic wave was unable to account for either of the photoelectric effect data. Hertz, who had shown the validity of the wave theory, chose not to explore the issue because he was confident that the wave theory could account for it.
According to Einstein's equation,
[tex]E=W_{o} +KE[/tex]
Given,
[tex]W_{o_{max} } =\\[/tex]4.2eV
KE=2.6eV
E=4.2eV+2.6eV
E=6.8eV
Learn more about photoelectric effect.
brainly.com/question/26465043
#SPJ4
.
Arevolving space station has radius of 250 m and a centripetal acceleration of 0.0048 m/s. What is the linear velocity of the outside edge of the station?
0.076 m/s
300 m/s
11m/s
230 m/s
The linear velocity of the outside edge of the station is 1.1 m/s.
How is the linear velocity determined?The equation for linear velocity is v = d/t, at which v stands for speed, d for distance, and t for time. The meter per seconds, or m/s, is the SI unit for linear velocity (ms-1). M0L1T-1 is the linear velocities dimensional formula.
The value of centripetal force is
F = mv^2/r
above equation as we know that m is the mass of the object rotating
Now as we know that
F = ma
where a is the acceleration
ma = mv^2/r
a = v^2/r
v= [tex]\sqrt{ar}[/tex]
= 1.1 m/s
To learn more about linear velocity visit:
https://brainly.com/question/13723307
#SPJ1
Consider a charged parallel-plate capacitor.How can its capacitance be halved?
Check all that apply.
Double thecharge.
Double theplate area.
Double theplate separation.
Halve thecharge.
Halve theplate area.
Halve theplate separation.
(A) The capacitor stores charge.
Therefore, having the ability to store charge is the best choice. (B) The air-filled parallel plate capacitors' expression is,is a measure of permittivity. The area of the plates is A, and their separation is d. The capacitance can be increased by either increasing the plate area or decreasing the distance between the plates.
Therefore, reducing the distance between the capacitor's plates is the best course of action.
(C) The capacitance of a parallel plate capacitor is directly proportional to the area of the plates and inversely proportional to the space between the plates. Therefore, the correct responses are "Double the plate separation and halve the plate area."
[tex]C=\frac{\epsilon_{o} A}{d}[/tex]
Here, [tex]\epsilon_{o}[/tex]
(D) The new capacitance is,
[tex]C^{1} =\frac{\epsilon_{o} A^{1} }{d^{1} }[/tex]
[tex]C^{1} =\frac{\epsilon_{o} 2A^{1} }{d^{1}/2 }[/tex]
[tex]C^{1} =4\frac{\epsilon_{o} A^{1} }{d^{1} }[/tex]
[tex]C^{1} =4C[/tex]
Therefore, the correct options are "Halve the plate separation and double the plate area".
Learn more about capacitor
brainly.com/question/17176550
#SPJ4
in an elliptical orbit of a planet around the sun, the sun sits at one focus, what sits at the other?
In an elliptical orbit of a planet around the sun, the sun sits at one focus and there is nothing at the other focus.
What is the solar system?We know that in the solar system, we have the sun at the focus or the center of a set of concentric circles that is composed of the planets. We know that the planets.
We have to note that in accordance with the Kepler's law, the only thing that we can be able to find at the center of the solar system is the sun and we do not find any other thing at the focus.
Learn more about solar system:https://brainly.com/question/12075871
#SPJ1
Determine the node voltages in the circuit in Fig. 3.67 using nodal analysis. 30 V
The node voltages in the circuit using nodal analysis determined as v1= 30V ; v2=v3= 60V.
What does "nodal analysis" mean?Any electrical network may be solved using nodal analysis, which is what it is called. the formula used to determine how much voltage is shared across circuit nodes. Since the node voltages are with respect to the ground, this method is also referred to as the node-voltage method.
Nodal analysis : the node voltage was determined.
At node 2,
=> v2-v1/2 + v2-v3/2 - 15=0
=> -0.5v1 + v2 -0.5v3=15
At super node,
v2-v1/2 + v2-v3/2 -v1/4 -v3/8 =0
=> 2v1+v3 = 120
v1+30 = v3
Hence, solving all equation we get
v1= 30V ; v2=v3= 60V
Why do we employ nodal analysis?We can solve for voltage and current in a circuit using numerous KCL equations that we acquire from nodal analysis of the circuits. There are one fewer KCL equations needed than there are nodes in a circuit.
Learn more about nodal analysis here:
brainly.com/question/28789991
#SPJ4
The capacitor is initially uncharged. At t = 0, the switch is thrown closed.a. Immediately after the switch is closed, what is the voltage drop across the capacitor?b. Immediately after the switch is closed, what is the current through each resistor?c. After a very long time, what is the voltage drop across the capacitor?d. After a very long time, what is the current through each resistor?e. The switch is then opened, immediately after it is opened what is the current through each resistor?
(a). The voltage drop across the capacitor is zero immediately upon the switch being closed. An electronic component called a capacitor is used to store electrical energy in an electric field.
Capacitor is made up of two conductive plates, separated by an insulating material called a dielectric. When a voltage is applied across the plates, an electric field is created, causing a charge to build up on the plates. The amount of charge stored by a capacitor is directly proportional to the voltage applied across it, and is measured in units of Farads (F). Capacitors are commonly used in a wide variety of electronic circuits, including power supplies, filters, and timing circuits. They can also be used in combination with resistors and inductors to form more complex circuits, such as oscillators and resonant circuits.
learn more about capacitor here:
brainly.com/question/14126841
#SPJ4
please help physical sciences grade 12.
5.1.1. The force that the wall will exerts on the car during this time will be 360000N.
5.1.2. The force the wall will now exert will be 120000N.
What is force?
Force is a physical influence that is capable of changing the motion of an object or altering its shape and structure. It is a vector quantity that is measured in newtons and is often described as a push or pull. Force can be caused by many different sources such as gravity, friction, and electromagnetism. Force can also be created through the application of energy, such as when a person pushes an object or when an object is acted upon by a magnetic field.
5.1.1. The force that the wall will exert on the car during the 0.25 seconds is calculated using the equation F=m*a, where F is force, m is mass and a is acceleration.
F = 900 kg * (100 km/h / 0.25 s)
F = 360000 N
5.1.2. The force that the wall will exert on the car during the 0.75 seconds is calculated using the same equation.
F = 900 kg * (100 km/h / 0.75 s)
F = 120000 N
To learn more about force
https://brainly.com/question/12970081
#SPJ1
what are the two primary mechanisms through which free water is separated from sludge solids in a belt press?
In a belt press, free water and sludge particles are separated using gravity drainage plus pressure dewatering as the main processes.
What does the word "mechanism" mean?The method or technique by which a result is brought about or a goal is achieved. generally speaking, machinery or mechanical devices. the design or configuration of a machine, comparable instrument, or something similar. The clock's mechanism is an example of a mechanical device or component.
which instances of mechanisms?Typically, a mechanism is a component of a larger operation, also referred to as a physical device or machine. A steering mechanism of a car or the winding clockwork of either a wristwatch are two examples of complete machines that can sometimes be referred to as mechanisms.
To know more about Mechanisms visit:
https://brainly.com/question/15079829
#SPJ4
A microwave oven operates at 2.4 GHz with an intensity inside the oven of 2700W/m2 .What is the amplitude of the oscillating electric field?What is the amplitude of the oscillating magnetic field?
The oscillating magnetization has an amplitude of 475.47 T and the electromagnet field has an amplitude of 1.42 * 10¹¹ V/m.
What exactly is a "electric field"?A characteristic of electricity existing at every location in space once charge of any kind is present. The value of E, often known as the electric field strength, electric field intensity, or just the electric field, expresses the direction and intensity of the electron beam.
I = Flux = 2700 W/m²
c = Speed of light = 3 * 10⁸m/s
μ₀ = vaccum permeability = 4π * 10⁻⁷H/m
The magnetic field's fluctuating amplitude
[tex]$$\begin{aligned}& B_0=\sqrt{\frac{2 \mu_0 I}{c}} \\& \Rightarrow B_0=\sqrt{\frac{2 \times 4 \pi \times 10^{-7} \times 2700}{3 \times 10^8}}\end{aligned}$$[/tex]
B₀ = 475.47 T
The oscillatory magnetization has an amplitude of 475.47 T.
The size of the electric field's oscillations,
E₀ = c * B₀
E₀ = 3 * 10⁸ * 475.47
E₀ = 1.42 * 10¹¹ V/m
The oscillating electric field's amplitude is 1.42 * 10¹¹ V/m
To know more about Electric field visit:
https://brainly.com/question/1592046
#SPJ4
Figure 9-23 shows an overhead view of three particles on which external forces act.The magnitudes and directions of the forces on two of the particles are indicated. What are the magnitude and direction of the force acting on the third particle if the center of mass of the three-particle system is (a) stationary, (b) moving at a constant velocity rightward, and (c) acc
(a) The magnitude and direction of the force acting on the third particle is zero, as the center of mass of the three-particle system is stationary.
(b) The magnitude and direction of the force acting on the third particle is equal in magnitude but opposite in direction to the force of the other two particles, as the center of mass of the three-particle system is moving at a constant velocity rightward.
(c) The magnitude and direction of the force acting on the third particle is equal in magnitude but opposite in direction to the acceleration of the center of mass of the three-particle system.
What is center of mass?
Center of mass (also known as the center of gravity) is the average location of all the mass in a system.
It is the point at which the entire mass of an object can be assumed to be concentrated. It is used to calculate the force of gravity acting on an object, as well as its response to forces applied to it.
To learn more about center of mass
Here: https://brainly.com/question/28134510
#SPJ4
(A) What is the magnitude of the net electric force on charge A in the figure? Assume that q1=0.70nC and q2=4.0nC(B) What is the direction of the net electric force on charge A?
The net electromagnetic force acting on charge A has a magnitude of 1.9 * 10⁻⁵ N and is acting in a leftward direction.
How is electric force produced?When two charges interact with one another, electrical forces are created. When there are three or so more charges present, the electric force exerted on a wireless charger is just the sum of the effects of each charge's interactions with the other charges.
(A). F = Kq1 *q1/(1cm)² - Kq1*q2/(2cm)²
F = 9 * 10⁹ * (0.7 * 10⁻⁹)²/(10⁻²)² - 9 * 10⁹ * 0.7 *4 * 10⁻¹⁸/(2*10⁻²)²
F = 4.41 * 10⁻⁵ - 6.3 * 10⁻⁵
F = -1.89 * 10⁻⁵
[tex]F_{A}[/tex] = 1.9 * 10⁻⁵ N
(B). The net positive charge acting on charging A is coming from the left.
To know more about Electric force visit;
https://brainly.com/question/19817118
#SPJ4
