a certain light truck can go around a flat curve having a radius of 150 m with a maximum speed of 36.0 m/s. with what maximum speed can it go around a curve having a radius of 78.0 m?

The higher the weight, the greater the static friction force, and the higher the resistance to sliding. Therefore, the combination with the highest resistance to sliding is C) 1,800lb 60lb.

Static friction force is the force that resists two objects from moving relative to each other. It is the force that is generated when two objects are in contact with each other and in a stationary state. This force is also referred to as the static coefficient of friction. It is a force that is always present between two surfaces when they are in contact. The magnitude of this force is dependent upon the nature of the surfaces and the amount of force applied to the surfaces. The magnitude of static friction force is usually greater than the kinetic friction force. Therefore, it is necessary to overcome static friction in order to initiate movement between two objects.

To learn more about static friction force
https://brainly.com/question/13014769
#SPJ4

Complete Question:
Of the blocks listed below, which combination of materials will have the highest resistance to sliding?block Weight Friction

A) 150lb 30lb

B) 20N 5N

C) 1,800lb 60lb.
D) non of these

(a) The line density of the given grating is calculated to be 4831 lines / cm.

(b) There are two additional pares of bright spots beyond the first bright spot. θ₂ = 37.7° and θ₃ = 66.5°

(a) Given that,

λ = 632.8 nm = 632.8 × 10⁻⁹ m

θ₁ = ± 17.8

We know that the brilliant fringes' angle is determined by,

sin θ = mλ/d

For first bright fringe, m = ± 1

sin θ₁ = λ/d  ----(1)

Line density of this grating is given by, N = 1/d ----(2)

Making d as subject in (1), we have,

d = λ/ sin θ₁ ----(3)

Putting (3) in (2), we have,

N = sin θ₁/ λ = sin 17.8/(632.8 × 10⁻⁹) = 4.831 × 10⁵ line/m = (4.831 × 10⁵ lines/ 1m) × (1 m/100 cm) = 4831 lines / cm

(b) We know, d sin θ = m λ

So, d = m λ/sin θ = (632.8 × 10⁻⁹/sin 17.8) = 2067.4 × 10⁻⁹ m

Line density = 10⁻² / (2067.4 × 10⁻⁹) = 4830 lines/cm

To get additional bright spots, we take the condition sin θm < 1 which gives,

sin θ₂ = 2 sin θ₁ = 2× 0.3056 = 0.62

θ₂ = 37.7°

sin θ₃ = 3 sin θ₁ = 3 × 0.31 = 0.93

θ₃ = 66.5°

To know more about laser light:

https://brainly.com/question/10095891

#SPJ4

The resultant force will be 50pound .

A force is an influence that has the power to alter an object's motion. A force can cause an object with mass to accelerate when it changes its velocity, for as when it moves away from rest. An obvious way to describe force is as a push or a pull. A force is a vector quantity since it has both magnitude and direction. It is calculated using the newton SI unit (N).

We are given that,

F₁ = 40pound

F₂ = 30 pound

Fr = ?

The square root of the sum of the squares of the two forces can be used to determine the resultant of the two forces as follows,

Fr = √F²₁ + F²₂

Putting the value in above equation ,

Fr = √40² + 30²

Fr = √1600 + 900

Fr = 50pound

Therefore , the resultant force would be 50pounds.

To know more about force

https://brainly.com/question/12140804

#SPJ4

Since the relative velocity of the sound source and the blood flow is zero, the beat frequency is zero.

The expected beat frequency can be calculated using the Doppler shift formula, which states that the beat frequency (f) is equal to the difference between the emitted frequency (f0) and the received frequency (f) multiplied by the speed of sound in the medium (c) divided by the relative velocity of the blood flow (v) and the sound source.

f = (f0 - f) * c / (v + c)

Plugging in the given values:

f = (500 kHz - 500 kHz) * 1540 m/s / (2.0 cm/s + 1540 m/s)

f = 0 Hz

Since the relative velocity of the sound source and the blood flow is zero, the beat frequency is zero.

bund waves are similar to radar waves in that they both use sound waves to measure the distance and speed of objects. However, radar uses radio waves instead of sound waves, and it is typically used for detecting objects at a greater distance and at a higher speed than ultrasound.

Learn more about radar waves in brainly.com/question/20756411?

#SPJ1

Answer:

They move and collide faster.

Explanation:

This is because increasing the temperature increases the kinetic energy of the gas particles. As a result they move rapidly having more more frequent collisions.

Answer:

When the temperature of the container increases, the kinetic energy of the gas molecule becomes high.

Explanation:

This means the collision rate of the particles increases. Due to the collision of gas particles, the pressure increases across the wall of the container.

Forces on object must be concurrent. Object must not deform under the forces. Object must not change shape. Object must not be large. Object must not rotate.

Force is a physical quantity that represents the interaction between two objects. Force can cause an object to accelerate or change its velocity. It can also cause a change in an object's shape or orientation. There are several types of force, such as gravitational force, electromagnetic force, and nuclear force.

An object can be treated as a particle under the following conditions:

Forces on object must be concurrent. Object must not deform under the forces. Object must not change shape. Object must not be large. Object must not rotate.

It's important to note that the concept of treating an object as a particle is a simplifying assumption used in some branches of physics, such as mechanics, and is only valid under certain conditions.

When an object is treated as a particle, it is assumed to have no internal structure, and that all forces acting on it act at a single point. The object is also assumed to be small enough that its deformation or shape change under forces can be ignored. Additionally, it is also assumed that the object does not rotate.

To know more about force, visit:

brainly.com/question/13191643

#SPJ4

The strength lens to be prescribed to correct this vision problem is 2.61 diopters.

Near point = 72cm

Normal point = 25cm

Using the lens formula -

1/f = 1/u + 1/v

where

f is the focal length

v is the image distance

u is the object distance

Substituting the values in the formula -

1/f = 1/25 + 1/(-72)

1/f = 0.0261

f = 1/0.0261

Therefore,

f = 38.31

f = 0.383m

Now, since the dioptric power is inverse of the focal length strength;

Therefore,

D = 1/f

= 1/ 0.383

= 2.61

Read more about the lens on:

brainly.com/question/3225974

#SPJ4

The slope of a Resistance vs Length graph is equivalent to

m = ρ/A. Its unit will be mho m⁻².

Given is the graph between resistance and the length of the wire.

We can write the resistance of a wire as -

R = (mL/ne²Aτ)

In this formula, the term -

(m/ne²τ)

represents a constant value called resistivity {ρ}. So, we can write -

R = ρL/A

where the metallic wire is of length {L}, cross - sectional area {A} and resistivity {ρ}.

Now, we can write the slope of resistance {R} and the length of the wire {L} as the ratio of {R} and {L}. So, we can write -

R/L = m

On comparing, we get -

m = ρ/A

Therefore, the slope of a Resistance vs Length graph is equivalent to

m = ρ/A. Its unit will be mho m⁻².

To solve more questions on resistance, visit the link below-

https://brainly.com/question/29427458

#SPJ1

The ratio of electric force and gravitational force is of the order 10³⁶ between the two protons separated by 2 m apart.

Given that,

Distance between the two protons = 2 m

Gravitational force is given by the formula, Gf = G (mp)²/r²

Electric force is given by the expression, E = (K × e × e)/r²

The ratio of electric force to gravitational force is given by the formula,

Ratio = K (1.6× 10⁻¹⁹)²/r² × r²/G × (1.67 × 10⁻²⁷) = (9 × 10⁹)(1.6× 10⁻¹⁹)²/ (6.67 × 10⁻¹¹)(1.67 × 10⁻²⁷) = 1.23 × 10²⁰ × 10¹⁶ = 1.23 × 10³⁶

Thus, the ratio of electric force and gravitational force is of the order 10³⁶. This means that the value increases drastically.

To know more about protons:

https://brainly.com/question/13226540

#SPJ4

The maximum Current is 19.57 ohm, as mentioned inside the paragraph preceding.

A circuit in electronics is a totally circular path that electricity passes through. A current source, wires, and a load are the components of a basic circuit. Any ongoing channel for the conveyance of energy, info, or a signal is referred to as a "circuit" in a wide sense.

Voltage across the left 10 ohm resistance is V = IR = 0.92A * 10 ohm = 9.2 V

Thus this is the voltage across the 15 ohm and R

Therefore the current in the 15 ohm = 9.2/15 = 0.61 A

Kirchoff's current law states that current in = current out

So, from the 10 ohm & 15 ohm resistors, 2A is entering, while 0.92 + 0.61 are exiting.

Let current from R resistance is I₁

So, 2A = 0.92 + 0.61 + I₁

I₁ = 0.47A

For Resistance R,

V = I₁R

R = V/I₁ = 9.2/0.47

R = 19.57 ohm

To know more about Circuit visit:

https://brainly.com/question/1176850

#SPJ4

Answer:

The pot of boiling/hot water will cool at a faster rate than the same-size pot of lukewarm water left at room temperature. This is because the boiling/hot water has more energy than the lukewarm water and is thus more likely to transfer energy to its surroundings. When energy is transferred, the temperature of the pot of boiling/hot water will decrease, while the temperature of the lukewarm water will remain relatively unchanged. This transfer of energy is called conduction, and it is the process by which heat is transferred from one object to another.

Explanation:

see above

The frequency of the green light is approximately 5.45×10¹⁴ Hz, for wavelength 550nm.

Frequency is the dimension of the number of times that a repeated event occurs per unit of time.

The frequency of wave-like patterns including sound, electromagnetic waves (similar as radio or light), electrical signals, or other swells, expresses the number of cycles of the repetitious waveform per second.

In SI unit is 1 Hz means one cycle (or wave) per second.

The frequency of a wave can be calculated by using the equation:

frequency (f) = velocity (v) / wavelength (λ)

In the case of green light, the velocity is given as 299,792,458 m/s and the wavelength is given as 550 nm (0.00000055 meters). upon placing the values in the equation,

f = 299,792,458 m/s / 0.00000055 m

To get the frequency of the green light in hertz (Hz), which is the unit of frequency in the International System of Units (SI).

f = 5.454545454545454545454545454545e+14 Hz

So, the frequency of the green light will be approximately 5.45×10¹⁴ Hz.

To know more about wavelength, visit:

https://brainly.com/question/13533093

#SPJ4

It is possible to measure a material's density by how closely it is packed. The mass per unit volume is how it is formally defined.

Examples of dense materials include iron, platinum, and lead. Dense material can be found in many different rock and mineral kinds. The relationship between a substance's mass and volume is what is referred to as its density. kilograms per cubic metre (kg/m3) is used to measure density in the SI system.

density = mass/ volume

rearranging formula we get

mass = density / volume

From the question

side of cube of gold = 2.50 g

volume of cube of gold = (2.50)³

Density = 19.3 g/cm³

Fill in the variables in the formula above to find the mass.

Mass is equal to 19.3 / (2.50)3 = 48.25.

Consequently, the gold cube's weight is 48.25 g.

To know more about density click here

https://brainly.com/question/29775886

#SPJ4

In order to calculate the instantaneous power, we can use the dot product of the force vector and the velocity vector. The dot product is defined as:

F·V = (4i + 3j - 2k)·(5i + 2j - 3k) = (45) + (32) + (-2*-3) = 20 + 6 - 6 = 20

So the instantaneous power is 20.

To calculate the angle between the force and velocity vectors, we can use the formula:

cos(θ) = (F·V) / (||F|| * ||V||)

where θ is the angle between the vectors, F is the force vector, V is the velocity vector, and ||F|| and ||V|| are the magnitudes of the force and velocity vectors.

First, we need to find the magnitudes:

||F|| = sqrt(4^2 + 3^2 + (-2)^2) = 5

||V|| = sqrt(5^2 + 2^2 + (-3)^2) = sqrt(29)

So we can now calculate the angle:

cos(θ) = (20) / (5 * sqrt(29))

We can get the angle by using the inverse cosine function (arccos)

angle = arccos(cos(θ))

Note that the angle is in radians, if you want to get the angle in degrees, you can use the conversion factor of 180/π.

This magnet may be divided in half to create two separate magnets, each featuring their own arrays of northern and southern magnetic poles. This is due to the absence of magnetic monopoles in nature.

Any substance that can draw iron and create a magnetic field around itself is a magnet. All known elements and several compounds had been investigated for magnetism by the end of 19th century, and it was discovered that every one of them has some sort of magnetic characteristic.

This demonstrates that magnetic monopoles cannot be created from a bar magnet. It is impossible for a bar to be split in two in order that one half possesses the magnetic north pole and the other the magnetic south pole. Instead, the east and west poles of each magnet will be unique.

To know more about Magnet visit:

https://brainly.com/question/14997726

#SPJ4

Using a spectrophotometer, optical density is determined in the experiment.

The optical density of a transparent material is a measure of how quickly light passes through the material. The degree to which any optically dense medium bends transmitted light rays toward or away from the norm is known as its optical density.

The slower the wave moves through the material, the higher the optical density. By examining the material's refractive index, one can establish its optical density. How much slower a light wave would flow through the medium in comparison to how quickly it would go through vacuum is represented by the dimensionless refractive index value.

To know more about optical density visit:

https://brainly.com/question/29833831

#SPJ4

The risk factors which are associated with dating a gang member include severe issues such as drug addiction and disorders like depression and anxiety. This could be avoided by maintaining a healthy relationship with the parents and partners.

The risk factors which are associated with dating a gang member include many problems and disorders. Problems could be major such as drug addiction, trafficking, etc. The constant problems could lead to depression and anxiety in an individual which could be life-threatening if remains untreated for a long time.

The ways in which these risk factors could be minimized and Arianna could be saved from dating a gang member include cumulative protection across domains, cumulative protection in the family domain, educational aspirations and self-esteem in the individual domain, and parental supervision and parent/partner status in the family domain.

Learn more about Risk factors here:

https://brainly.com/question/13533020

#SPJ1

The object with the greatest inertia is 8 kg bowling ball.

option A is the correct answer.

Newton's first law of motion states that a body at rest or uniform motion in a straight line will continue in that form unless it is acted upon by an external force.

Newton's first law of motion is also called the law of inertia because it depends on the mass of the object.

The inertia of a body or an object is the measure of the reluctance of the body or object to start moving when it is at rest or to to stop moving when it is in motion.

The inertia of an object depends on the mass of the object, thus the greater the mass of an object the greater the inertia of the object and vice versa.

Learn more about inertia here: https://brainly.com/question/1140505

#SPJ1

The the number of gallons needed for the trip will be 83.72 gallons.

Scientific notation is a method of displaying very large or very small numbers in a more simplified format. We know that entire numbers can be extended indefinitely, but such large numbers cannot be written on a piece of paper. Furthermore, the numbers in the millions place after the decimal required to be represented in a simpler format.

As a result, representing a few integers in their expanded form is challenging. As a result, we employ scientific notation. In this case, the gallons needed to travel is 1 gallon per 20000 miles.

The equivalent distance of 7 trips between the Earth and its moon will be:.

= 7 × 239,000 miles

= 1674400 miles

Since 1 gallon per 20000 miles,the number of gallons needed will be:

= 1674400 / 20000

= 83.72 gallons.

Learn more about scientific notation on:

brainly.com/question/1767229

#SPJ1

Complete questions

The gallons needed to travel is 1 gallon per 20000 miles. Calculate the gallons of gasoline needed to drive an equivalent distance of 7 trips between the Earth and its moon (1 trip = 239,000 miles). You will only type in the number for your result in scientific notation here (no units).

The kinetic energy of the electron orbits a lithium nucleus that contains three protons ( 3e) whose radius of the orbit is 1.76x10-11 m is 123eV.

Given the lithium nucleus contains 3 protons also 3 electrons

The radius of orbit (r) = 1.76x10-11 m

We know the resultant force acting on the nucleus is F.

F = k x q(nu) x q(e)/r^2 = k x (3e) x(e) /r^2 = 3ke^2/r^2

This force is equal to centripetal force = mv^2/r where m is mass of electron, v is velocity

Then 3ke^2/r^2 = mv^2/r

3ke^2/r = mv^2

The kinetic energy is taken as (KE) = 1/2mv^2 = 3ke^2/2r

Here k = 8.99 x 10^9 Nm^2/C^2 and the charge on electron

(e) = 1.6 x 10^-19C

Then KE = 3 x 8.99 x 10^9 x ( 1.6 x 10^-19)^2 / 2 x 1.76x10-11

KE = 1.96 x 10^-17J = 122.6eV

Hence the required kinetic energy of the electron is 123eV.

To learn more about velocity click here https://brainly.com/question/18084516

#SPJ4

The speed of the car is 16.32 m/s, when the mass of the car is 1500kg and the kinetic energy is 200kj.

The energy of motion is known as kinetic energy, and it is manifested in the motion of objects and subatomic particles. Every particle and moving object contains kinetic energy. When something moves, such as when someone walks, a baseball soars, a piece of food falls off a table, or a charged particle moves in an electric field, kinetic energy is clearly visible. The kinetic energy of stationary objects is zero.

The potential energy of objects that aren't moving (the other main type of energy). Potential energy becomes kinetic energy when an object is propelled into motion by a force, such as gravity. For instance, a stretched rubber band stores elastic potential energy, which, upon release, is converted into kinetic energy.

The formula for kinetic energy is

K.E. = 1/2m × v²

200(1000j) = 1/2(1500) × v²

200000 =  750 × v²

v² = 200000/750

v² = 266. 6

v = √266. 6

v = 16.32 m/s

Thus,  the speed of the car is 16.32 m/s  

Learn more about kinetic energy

https://brainly.com/question/15764612

#SPJ4

Answer:

bal dB its Jack no jobs JDM idle dodo bridge jebel Jens Jay Hodge

Answer:

5 sec

Explanation:

[tex]99 \div 21.8 [/tex]

b) Work = force x displacement = 215 N x (-4.60 m) = -992.5 J.  the same carries the same suitcase back down the same set of stairs. how much work does the passenger do on the suitcase to carry it down the stairs.

what is work ?

Work is an activity that involves physical or mental effort undertaken in order to achieve a result. It is usually done in exchange for money, but can also be done out of necessity or for pleasure. Work is often seen as an important part of life and it can come in many different forms, ranging from manual labour to professional and creative work.

Work can be rewarding and provide a sense of purpose and achievement for those who engage in it. It can also be a source of stress, especially when it is not well-suited to an individual’s skills or needs. The type of work an individual does can vary depending on their skills, interests, and resources. Working can help to build relationships, develop skills, and provide financial security.

To learn about more work .

https://brainly.com/question/25573309

#SPJ4

5) They experience the same size force. Both car and dump truck will experience the force of same magnitude. But, change in acceleration is greater for smaller car.

Collision is when two or more objects collide with each other, either directly or indirectly. In physics, collision is defined as the interaction between two or more bodies, where the total kinetic energy of the two bodies before the collision is greater than the total kinetic energy of the two bodies after the collision.

Collisions can involve two or more objects and can be elastic or inelastic. Elastic collisions involve objects that bounce off of each other and inelastic collisions involve objects that stick together after the collision. Collisions can also involve two or more particles, where the particles interact and exchange energy, momentum and angular momentum.

Both car and dump truck will experience the force of same magnitude. But, change in acceleration is greater for smaller car.

To learn more about collision
https://brainly.com/question/4403635
#SPJ4

"An astronomer observes the light of a galaxy that is 600 million light-years away. The age of light is 18.92 × 10¹⁵ s."

Given that,

Distance to the galaxy = 600 million light years = 600× 10⁶ light years = 6×10⁸ light years

We know the speed of light as, c = 3 × 10⁸ m/s

The relation between distance, speed and time is known to be,

Distance = Speed × Time

So, to know the age of time, let us make time as subject,

Time = Distance/Speed

1 light year = 9.46 × 10¹⁵ m

Putting in the above values,

Time = (6×10⁸ × 9.46 × 10¹⁵)/(3 × 10⁸) = 18.92 × 10¹⁵ s

Thus, the age of light is 18.92 × 10¹⁵ s.

To know more about light:

https://brainly.com/question/30019713

#SPJ4

Answer:

The Mechanical Advantage (MA) of a tool is the ratio of the output force to the input force. In the case of a screwdriver, the output force is the force applied to the tip of the screwdriver, and the input force is the force applied to the handle.

To calculate the MA of the screwdriver, we need to use the following formula:

MA = Output Force / Input Force = (Distance from the center to the outermost edge of the tip) / (Distance from the center to the outermost edge of the handle)

The radius from the center to the outermost edge of the tip of the screwdriver is 50.0 mm and the radius of the handle is 240 mm. To find the distance, we need to double the radius.

Distance from the center to the outermost edge of the tip = 2 * 50.0 mm = 100.0 mm

Distance from the center to the outermost edge of the handle = 2 * 240 mm = 480.0 mm

Now we can use the formula to calculate the MA:

MA = 100.0 mm / 480.0 mm = 0.208333

So the MA of the screwdriver is 0.208333. This means that for every 1 N of force applied to the handle, the tip of the screwdriver will exert 0.208333 N of force on the screw.

Explanation:

Answer:

Explanation:

a) The final kinetic energy of the car is equal to the work done in accelerating the car from rest to a speed of 30ms^-1. Therefore, the final kinetic energy of the car is equal to:

KE = ½ mv^2 = ½(1000kg)(30ms^-1)^2 = 450,000 J

b) The power of the car can be calculated by dividing the work done by the time taken for the acceleration. Therefore, the power of the car is equal to:

Power = Work/Time = 450,000 J/12s = 37,500 W

c) The electrical current flowing from the battery can be calculated by dividing the power by the voltage of the battery. Therefore, the electrical current flowing from the battery is equal to:

Current = Power/Voltage = 37,500 W/300V = 125 A

Assumptions:

1. The car is assumed to be moving in a straight line with no friction.

2. The batteries are assumed to be wired correctly and in good condition.

3. The car is assumed to have a constant acceleration over the 12s period.

4. The voltage of the battery is assumed to remain constant over the 12s period.

Work done by a force will be the force is in the direction of displacement determined as Force × Displacement in the direction of force.

W = Fd is the formula for the amount of work W that a constant force does on an object. It is determined by dividing the force's intensity by the distance the body travels in the force's direction.

Displacement is simply the distance between an object's starting point and its final location, whereas distance is the length of an object's path. When measured along the shortest path between any two points, displacement is indeed the direct distance between them.

Learn more about work done here:

brainly.com/question/29989410

#SPJ4

The final momentum of bumper car 2 is -241.0 kgm/s.

The magnitude of the final momentum of bumper car 2 can be found using the conservation of momentum principle, which states that the total momentum of a closed system remains constant before and after a collision.

To calculate the final momentum of bumper car 2, we can use the following equation:

initial momentum of system = final momentum of system

250.0 + (-320.0) = (-311.0) + final momentum of bumper car 2

-70.0 = (-311.0) + final momentum of bumper car 2

final momentum of bumper car 2 = -241.0 kgm/s

The final momentum of bumper car 2 is -241.0 kgm/s.

If you want to learn more about conversation of momentum, click here

https://brainly.com/question/13789580?referrer=searchResults

#SPJ4