A chemist wants to find Kc for the following reaction at 736 K:2NH3(g) + 3 I2 (g) LaTeX: \Longleftrightarrow ? 6HI(g) + N2(g) Kc = ?Use the following data at 736 K to find the unknown Kc:(1) N2(g) + 3 H2(g) LaTeX: \Longleftrightarrow ? 2 NH3(g) Kc1 = 0.318(2) H2(g) + I2(g) LaTeX: \Longleftrightarrow ? 2 HI(g) Kc2 = 55Enter to 0 decimal places.

The molarity of the solution will be 0.4M.

The unit of measurement for a chemical compound is the mole. The term "molarity" in science refers to a substance's concentration, which is determined by dividing its molecular mass by the volume of the solution it is in.

As given,

Weight of NaOH =  4g

Molecular weight of NaOH = 40 G

Volume of the solution is 250ml

Molarity = ?

M = (W / MW ) × (1000 / V(in ml))

M = ( 4 / 40) ×  (1000 / 250)

0.4M

To learn more about molarity, click here: -
https://brainly.com/question/2817451

#SPJ4

Protons that are present are in an isotope of sodium with a mass number of 25 are a.) 11. Hence, option a) is correct.

Isotopes are two or more types of atoms that have same atomic number and position in the periodic table, but that differ in nucleon numbers due to the different numbers of neutrons in their nuclei.

Atoms with same number of protons and different numbers of neutrons are known as isotopes. They share almost same chemical properties but have different mass and therefore different physical properties. Example: carbon 12, carbon 13, and carbon 14 are all isotopes of carbon.

To know more about isotopes, refer

https://brainly.com/question/14220416

#SPJ4

In general, the mass m of each isotope times its natural abundance p yields the atomic mass A of an element, which can be calculated by adding the resulting numbers: 44\sRu\s99.9

The average mass of an element's atoms expressed in atomic mass units is known as its atomic mass (amu, also known as daltons, D). The atomic mass of an element is a weighted average of all of its isotopes and is calculated by multiplying each isotope's mass by its abundance.

The periodic system, which arranges the elements in increasing order of the number of protons in their nuclei, uses each element's atomic number to identify it. Because there are always the same number of protons and electrons in a neutral atom, the number of protons also determines the atomic number.

To know more about atomic mass visit:

https://brainly.com/question/5661976

#SPJ4

Answer:The molecular formula is C5 H10 O5 .

Explanation:

The structural feature that gives isotopes special names like protium, deuterium, and tritium refers to the number of neutrons each isotope has.

Protium is the most common and stable form of hydrogen, it has one proton and no neutrons in its nucleus.

Deuterium is a stable isotope of hydrogen that has one proton and one neutron in its nucleus.

Tritium is a radioactive isotope of hydrogen that has one proton and two neutrons in its nucleus.In summary, protium refers to the number of protons in the nucleus, deuterium refers to the number of neutrons and protons in the nucleus and tritium refers to the number of neutrons in the nucleus.

Learn more about isotopes here:

https://brainly.com/question/12955625

#SPJ4

If the pressure of the each gas is increased at a constant temperature until condensation occurs, Then a) octane will condense at the lowest pressure.

Condensation is the process by which water vapor in the air is converted to liquid water. It is the opposite of evaporation. Condensation is essential for the water cycle as it causes the formation of clouds. Condensation is the process by which the physical state of matter changes from the gas phase to the liquid phase. For example, condensation occurs when water vapor (a gas) in the air contacts a cooler surface and turns into liquid water. Octane is a gasoline additive that modern engines need to function properly. Sources of octane have taken many forms over the years. Ocatne will condense at the lowest pressure.

Learn more about the condensation in

https://brainly.com/question/1447093

#SPJ4

An identical cylinder containing hydrogen at the same pressure as a cylinder containing oxygen will contain more hydrogen molecules because hydrogen gas (H2) has a lower molar mass than oxygen gas (O2). This means that there are more H2 molecules in a given volume at a given pressure, as compared to O2.

Because hydrogen gas (H2) has a smaller molar mass than oxygen gas, an identical cylinder holding hydrogen at the same pressure will hold more hydrogen molecules (O2). This indicates that compared to O2, there are more H2 molecules in a given volume at a given pressure.

Learn more about identical cylinder here:

https://brainly.com/question/28474923

#SPJ4

Answer:

the molecular formula = SF6

Explanation:

firstly we have to list the firmulas we r goin to use to work out the molecular formula.

now we use the 1st formula to find n which will be substituted into the molecular formula

We are going to take the mass we have been given in the question as the mass of the compound and substitute it to the formula.

Then we will work out the mass of empirical formula for the compound: Sulphur; 32 flourine;19 SF6_ 32+6(19)=146

now we finish off n

Lastly we work out the molecula formula

the final answer will therefore be SF6

the theoretical yield (g) of nh3 produced by the reaction if 17.04 g n2 is mixed with 8.160 g h2 , is 20.66g

The theoretical yield of NH3 produced by the reaction of 17.04g of N2 and 8.160g of H2 can be calculated using the balanced equation for the reaction:  N2 + 3H2 --> 2NH3. To calculate the theoretical yield, we need to determine how many moles of NH3 will be produced from the given amounts of N2 and H2. First, we convert the given masses of N2 and H2 to moles. For N2: 17.04 g / 28.02 g/mol = 0.608 mol. For H2: 8.160 g / 2.016 g/mol = 4.04 molSince the balanced equation states that the reaction requires 3 moles of H2 for every 1 mole of N2, we can use the ratio of moles of H2 to moles of N2 to determine how much N2 is needed. 4.04 mol H2 / 3 mol H2/1 mol N2 = 1.34 mol N2. Since we have 0.608 mol of N2 and we need 1.34 mol of N2, we can't produce NH3 using all the N2, so we use the amount of N2 we have and find how much NH3 we can produce.0.608 mol N2 * 2 mol NH3/1 mol N2 = 1.216 mol NH3. To convert the moles of NH3 back to mass, we use the molar mass of NH3 (17.03 g/mol). 1.216 mol NH3 * 17.03 g/mol = 20.66 g NH3. So the theoretical yield of NH3 produced is 20.66 g.

Learn more about theoretical yield here:

https://brainly.com/question/14966377

#SPJ4

O2 has a -498 kJ/mol bond energy.

Measure of Bond Energy

The symbol for it is typically H. Bond energy is measured in kcal/mol, often known as kJ/mol, or kilojoule/mol. It should be noticed that the bond energy is consistently positive. The favourable indication results from the energy being supplied to disrupt the chemical bonds.

Bond enthalpy, often referred to as bond-dissociation enthalpy, average bond energy, or bond strength, is a term used to indicate how much energy is held in a bond between atoms in a molecule. In particular, it refers to the additional energy required for the homolytic or symmetrical cleavage of a bond in the gas phase.

To know more about bond energy visit:

https://brainly.com/question/26141360

#SPJ4

a) 0.47 mol ethanol having volume about  2.24 liters.

b) 1.24 mol ethanol having volume about 5.9L.

c) 1.3×10⁻² mol ethanol having volume about 0.062L.

The ratio of a substance's given mass in a chemical reaction to the mass of one mole of that substance determines the number of moles of that substance. The Avogadro number, or 6.023×10²³, is equal to one mole of any substance.

We have 0.210M ethanol solution

Molarity = no of moles /v in ml

0.47 mol ethanol

0.210M = 0.47/ /v in liters

v in liters = 0.47/0.210

v in liters =  2.24 liters

1.24 mol ethanol

0.210M = 1.24/ /v in liters

v in liters = 1.24/0.210

v in liters = 5.9L

1.3×10⁻² mol ethanol

0.210M = 1.3×10⁻² /v in liters

v in liters = 1.3×10⁻²/ 0.210m

v in liters = 0.062L or 62ml.

To know more about moles visit:

https://brainly.com/question/29249811

#SPJ4

State not play an important a significant role in the extent of harm upon exposure to a chemical.

What is meant by chemical?

To learn more about chemical refer to

https://brainly.com/question/1222323

#SPJ4

The picture below represents atoms with a covalent bond. Option B is the correct answer.

In order to maintain stability, covalent bonds, a particular kind of chemical link, form between hydrogen atoms, nonmetals, and semimetals. The exchange of one or more pairs of electrons between two atoms forms a covalent connection. The two atomic nuclei are drawing these electrons in unison.

When there is insufficient space between two atoms' electronegativities for an electron transfer to take place and create ions, a covalent bond is formed. In organic chemistry, covalent bonds predominate over ionic bonds by a wide margin.

To learn more about covalent bonds, visit the link below:

brainly.com/question/19382448

#SPJ4

The complete question is:

Look at the picture below.

What does this picture represent?

A. Atoms that are ions

B. Atoms with a covalent bond

C. Atoms with no bond

D. Atoms with

The maximum amount of NaCl possible would be 5.85 grams.

From the balanced equation of the reaction, the mole ratio of sodium that reacts to sodium chloride that is formed is 1:1. Thus, the first thing would be to convert the mass of the sodium given to its mole equivalent.

Mole = mass/molar mass

Mole of 2.3 g sodium = 2.3/23 = 0.1 mol

Since the mole equivalent of the sodium that reacts is 0.1, the mole equivalent of the sodium chloride that is produced will also be 0.1 since the mole ratio is 1:1.

Thus, the mass of 0.1 mol sodium chloride can be deduced as follows:

Mass = mole x molar mass

Molar mass of NaCl = 23 + 35.5 = 58.5 g/mol

Mass of 0.1 mo of NaCl = 0.1 x 58.5

                                       = 5.85 grams.

In other words, the maximum amount of sodium chloride that can be formed from the reaction of 2.3 g of sodium with excess chrlorine will be 5.85 grams.

More on stoichiometric problems can be found here: https://brainly.com/question/29775083

#SPJ1

A weak base, ammonia solution will dissociate into: NH3 + H2O. Initial combination: NH4+ + OH- , The pH of a 0.205 M ammonia solutionpH = 11.3

Quite poisonous is ammonia. Lungs, eyes, & skin can become seriously corroded by it. Ammonia poisoning can potentially lethal. Ammonia can injure people permanently by causing blindness and lung issues, for example.

Approximately 80% of a ammonia produced from industry is used as fertilizer in agriculture. In addition to these uses, ammonia is also employed in the production of polymers, explosives, textiles, insecticides, dyes, and other compounds. It also serves as a refrigerant gas.

To know more about ammonia visit:

https://brainly.com/question/15409518

#SPJ4

A new volume of 80ml results from changing the pressure to 1000mm Hg.

To learn more about pressure refer to:

https://brainly.com/question/28012687

#SPJ1

As atomic number increases, priorities rise. Iodine is therefore given precedence over bromine, oxygen is given less importance. Carbon has a lower priority than oxygen since it has a lower atomic number.

All life on Earth depends on carbon for its chemical structure. The amount of carbon that exists on Earth now is the same as it has always been. Carbon creates essential compounds like protein and DNA when new life is created. Additionally, it can be found in our atmosphere as carbon dioxide, or CO2.

The nucleus of a carbon atom is made up of six protons and six neutrons, and it is encased in six electrons. According to quantum physics, the first two electrons must occupy the innermost atomic orbital, while the wavefunctions of the following four electrons only partially fill the second standard and three second principal orbitals.

To know more about Carbon visit-

https://brainly.com/question/13719781

#SPJ4

d. The IE of Mg is higher than that of calcium is not true for the the ionization energy (IE) of the magnesium atom.

The ionization energy (IE) of an atom is the energy required to remove an electron from the atom. The IE of magnesium (Mg) is lower than that of sodium and neon, but higher than that of beryllium. The IE of Mg is lower than that of Mgt (Which is not an element) and higher than that of calcium.

Mg and Ca are both located in the same group (group 2) in the periodic table and have similar electron configurations. However, the IE of Mg is higher than that of Ca because the valence electrons in Mg are held more tightly than in Ca due to the increase in the effective nuclear charge.

To learn more about ionization energy:

brainly.com/question/1445179

#SPJ4

The pairs of elements which forms covalent bonds. P and S are the elements which forms iconic bond are D. Mg and o.

An ionic bond that is produced between metallic and non-metallic atoms, here the electrons are completely transferred from one atom to another in this process. During this process, one atom loses electrons and another one gains them in this process, forming ions. The metal gives up the electrons forming a cation which results in nonmetal element, which forms an anion. In this process the octet rule is fulfilled which means that this rule states that each atom in a molecule requires 8 valence electrons (in the last layer) to remain stable.

The covalent bond can be defined as the chemical bond between atoms where electrons are shared,  forming a unit called molecule. Covalent bonds are the ones that are established between non-metallic elements, like hydrogen H, oxygen O and chlorine Cl. These elements have electrons in the outermost level and have a tendency to gain electro which acquire the stability of the electronic structure of the noble gas like He.  In other words, sharing electrons, non-metallic elements must lose or gain in order to comply with the Octet rule.

Learn more covalent bonds:

brainly.com/question/30031358

#SPJ4

Rosuvastatin is a dihydroxymonocarboxylic acid that is used to treat (6E) -7-{4-(4-fluorophenyl)-2-[methyl(methylsulfonyl)amino] Two hydroxy substituents are present at positions 3 and 5 in the compound 6-(propan-2-yl)pyrimidin-5-yl hept-6-enoic acid (the 3R,5S-diastereomer).

Since its introduction, rosuvastatin has lived up to its initial expectations as a very effective statin that has positive effects on HDL, demonstrates a decline or cessation in the atherosclerotic burden, and lowers cardiovascular events in reduced patients.

Rosuvastatin is typically used once daily. Since you can use it whenever you choose, it's better to consume it at the exact hour each day. Taken with or without food, rosuvastatin typically won't make you feel sick.

To know more about rosuvastatin visit:

https://brainly.com/question/24891584

#SPJ4

The smallest elemental component of an atom, the electron has a negative charge.

The correct option are:

1.  (b) current

2. (c) potential

3.  (b) coulombs (C)

4.  (a) amperes (A)

5.  (d) volts (V)

Particles like electrons and protons have electric charge as one of their properties. Protons and electrons are positively and negatively charged subatomic particles, respectively.

Coulomb, represented by the letter C, is a unit of measure for an object's electric charge.

The net flow of electric charges through a specific area per unit of time is known as current or electric current. The unit of measurement for electrical current is the ampere, or A.

Possibility or The effort put forth to transfer electric charges from one location to another is referred to as electric potential. Potential, represented by the letter V and measured in volts, is what drives the movement of charges.

To know more about current

https://brainly.com/question/13076734

#SPJ4

A) The volume of hydrogen container is the same as the volume of the oxygen container. This statement is false for the given gases are at the same temperature and pressure.

According to the ideal gas law PV = nRT, the volume of a gas sample is proportional to the number of moles of the gas present, assuming that the pressure and temperature are constant. Since the number of moles of hydrogen is much less than the number of moles of oxygen (0.50 grams of hydrogen is roughly equivalent to 0.01 moles while 8.0 grams of oxygen is roughly equivalent to 0.2 moles), the volume of the hydrogen container would be much smaller than the volume of the oxygen container.

Learn more about gases here:

brainly.com/question/15089167

#SPJ4

two flexible containers for gases are at the same temperature and pressure. one holds 0.50 grams of hydrogen and the other holds 8.0 grams of oxygen. which of the following statement regarding these gas samples is false?

A)the volume of hydrogen container is the same as the volume of the oxygen container

B) the number of molecules in the hydrogen container is the same as the number of molecules in the oxygen container

C) the density of hydrogen sample is less than that of oxygen sample

D) the average kinetic energy of the hydrogen molecules is the same as the average kinetic energy of the oxygen molecules

E) The average speed of hydrogen molecules is the same as the oxygen molecules

The scientists would likely find that the radioactive phosphorus was located inside the host bacterial cells and the radioactive sulfur was located outside the host bacterial cells.

Bacterial cells are single-celled organisms that are found in a wide variety of habitats. They are prokaryotic, meaning they do not have a nucleus or other organelles. Instead, their genetic material is contained in a single circular chromosome, which is found within the cytoplasm. Bacterial cells contain a variety of structures, including cell walls, flagella, and pili, which help them to move, attach to surfaces, and communicate with other cells.

To learn more about bacterial cells
https://brainly.com/question/16613278
#SPJ4

The appropriate law for this problem is Graham's Law of Effusion and Diffusion.

Appropriate law is the legal framework and regulations that are established to ensure fairness and justice within a society. It defines the rights and responsibilities of individuals, businesses, and governments, and helps to promote the public good.

Graham's Law states that the rate of effusion or diffusion of a gas is inversely proportional to the square root of its molecular weight. This means that the lighter the gas, the faster the rate of effusion or diffusion. In this case, u-235 has an atomic mass of 235 g/mol, while u-238 has an atomic mass of 238 g/mol. This makes u-235 the lighter gas, so it will diffuse faster than u-238. Therefore, the answers to the questions are:

u-235 diffused 1.01 times faster than u-238

u-235 effused 1.01 times slower than u-238

u-235 effused 2.01 times slower than u-238

u-235 diffused 1.01 times faster than u-238

u-235 diffused 10.01 times faster than u-238

To learn more about appropriate law
https://brainly.com/question/11734843
#SPJ4

1. Identify the phenylthiohydantion: This step involves identifying the amino acid to be degraded using an appropriate reagent that will react with the amino acid to form a new compound called a phenylthiohydantoin.

Phenylthiohydantion (PTH) is a chemical compound that is used as a reactant in organic synthesis.

2. Extract the derivatized amino acid: This involves extracting the phenylthiohydantion from the reaction mixture by using an appropriate solvent.
3. Treat with 6M HCl: This step involves treating the extracted phenylthiohydantion with 6M HCl, which will cleave the peptide bond and produce the free amino acid and a thiohydantoin derivative.
4. Treat with phenyl isothiocyanate: This step involves treating the thiohydantoin derivative with phenyl isothiocyanate, which will form a phenylthiocarbamoyl derivative.
5. Treat with trifluoroacetic acid: This step involves treating the phenylthiocarbamoyl derivative with trifluoroacetic acid, which will hydrolyze the derivative and release the amino acid as a phenylthiohydantoin derivative.
6. Treat with dinitrofluorobenzene: This step involves treating the phenylthiohydantoin derivative with dinitrofluorobenzene, which will further degrade the derivative into its component parts.

To learn more about phenylthiohydantoin
https://brainly.com/question/17562786
#SPJ4

Answer:

2.009315 grams

Explanation:

0.0175 moles is equal to 2.009315 grams.

2.395 grams of lithium hydroxide are needed to completely neutralize 500 ml of a 0.2 m solution of HCl.

A chemical reaction between an acid and a base that results in a more neutral solution is known as a neutralization reaction. The strength of the acid and base used in the reaction determines the pH of the solution.

For the neutralization reaction: LiOH + HCl -> H2O + NaCl

To find the number of moles of HCl present in the solution:

0.2M * 0.5L = 0.1 moles of HCl

As the reaction is a neutralization reaction, the number of moles of HCl will be equal to the number of moles of LiOH used in the reaction.

Now, we know the number of moles of LiOH used in the reaction is 0.1 moles.

To find the mass of LiOH used in the reaction, we can use the formula: mass = moles * molar mass

The molar mass of LiOH is 23.95 g/mol.

mass = 0.1 moles * 23.95 g/mol = 2.395 g of LiOH.

Therefore, 2.395 grams of lithium hydroxide are needed to completely neutralize 500 ml of a 0.2 m solution of HCl.

To know more about neutralization reaction, visit:

brainly.com/question/27891712

#SPJ4

According to the question: the Kb for ethylamine is 7.59 x 10^-14.

Ethylamine is an organic compound with a chemical formula of C2H7N. It is a colorless liquid with an ammonia-like odor.

Kb is the acid dissociation constant for bases. It is defined as the equilibrium constant for the reaction in which a base reacts with water to form its conjugate acid and hydroxide ions:
B + H2O → HB+ + OH-
The Kb for ethylamine can be calculated using the equation:
Kb = [HB+][OH-] / [B]

For a 0.100 M solution of ethylamine, the concentration of ethylamine is 0.100 M and the pH is 11.87.
First, we need to calculate the concentration of hydroxide ions ([OH-]) from the pH.
The pH of a solution is equal to the negative logarithm of the molar concentration of hydrogen ions ([H+]):
pH = -log[H+]
Therefore, the molar concentration of hydroxide ions ([OH-]) can be calculated as:
[OH-] = 10^-pH = 10^-11.87 = 7.59 x 10^-12 M
Now, we can calculate the Kb for ethylamine as:
Kb = [HB+][OH-] / [B]
  = (7.59 x 10^-12 M) / (0.100 M)
  = 7.59 x 10^-14
Therefore, the Kb for ethylamine is 7.59 x 10^-14.

To learn more about ethylamine
https://brainly.com/question/21587352
#SPJ4

700 ml of 10% salt solution and 700 ml of 90% water should the chemist use to make 1400 ml of a solution that is 6% salt.

In chemistry, a solution is a homogeneous combination of two or more compounds in their relative proportions. The composition of the solution can be continually changed up to the solubility limit. Although the term "solution" is frequently used to refer to the liquid state of matter, mixtures of gases and solids are also possible.

When one material dissolves, or separates into another, a solution is created. Solute refers to the material that dissolves to create a solution. A solvent is a substance that helps a solute dissolve. Water serves as the solvent and sugar as the solute in a sugar-water solution.

Given that,

Total solution = 1400 ml

now, x + y = 1400 ....... (i)

Here, x = salt in ml

y = water in ml

Next, 10% salt and 90% water for one solution

another solution that is only 2% salt

Thus, 0.1x + 0.02y = 1400

x + 0.2y = 840 ....... (ii)

Now, from equation (i) and (ii) we get -

0.8 y = 560

or, y = 700 ml

now, x = 1400 - y

or, x = 700 ml

To know more about solutions refer to :

https://brainly.com/question/26873446

#SPJ4

Answer: Each molecule has a characteristic size and shape that determines its function in the living cell

Explanation:

The shapes of molecules are determined by the positions of the atoms' orbitals. When an atom forms covalent bonds, the orbitals in its valence shell are rearranged.