The resonant frequency of the circuit just after the switch is opened is ωo = 250.86 rad/s.
When the switch is opened at time t=0, the current through inductor L1 is interrupted and the energy stored in it will start to discharge. The energy stored in an inductor is given by the formula E=1/2 * L * I^2, where E is the energy, L is the inductance, and I is the current.
Just before the switch is opened, the current through inductor L1 is equal to the current in the circuit, which can be found using Ohm's Law: V=IR. Thus, I=V/R1 = 12/289 = 0.0415 A.
Therefore, the energy stored in inductor L1 just after the switch is opened is:
E = 1/2 * L1 * I^2 = 1/2 * 0.394 * 0.0415^2 = 0.000034 J
So, UL1(0) = 0.000034 J
2) The resonant frequency of an RLC circuit is given by the formula:
ωo = 1/√(LC)
where ωo is the resonant frequency, L is the inductance, and C is the capacitance.
At t=0, the capacitor is fully charged and there is no current in the circuit. Thus, the initial conditions for the circuit are: i(0)=0 and vC(0)=12V.
The impedance of the circuit just after the switch is opened can be found using the formula:
Z = R1 + j(ωL2 - 1/(ωC))
where j is the imaginary unit, ω is the angular frequency, and L2 is the inductance of the second inductor.
To find the resonant frequency, we need to find the value of ω that makes the impedance Z purely resistive. This means that the imaginary part of Z must be equal to zero. So:
ωL2 - 1/(ωC) = 0
ωL2 = 1/(ωC)
ω^2 = 1/(L2C)
ωo = √(1/(L2C)) = √(1/((0.172)(91x10^-6))) = 250.86 rad/s
Therefore, the resonant frequency of the circuit just after the switch is opened is ωo = 250.86 rad/s.
Learn more about resonant frequency
brainly.com/question/13040523
#SPJ11
Wave interference that results in lesser wave amplitude is called:.
The type of wave interference that results in lesser wave amplitude is called "destructive interference".
Destructive interference occurs when two waves with the same frequency and amplitude are out of phase with each other, meaning that the crest of one wave coincides with the trough of the other wave.
As a result, the positive and negative displacements of the waves cancel each other out, leading to a reduction in the overall amplitude of the resulting wave.
Destructive interference can occur in various types of waves, including sound waves, water waves, and electromagnetic waves such as light.
It is an important concept in wave physics, and is used in many applications such as noise-cancelling headphones, where destructive interference is used to cancel out unwanted sound waves.
To know more about destructive interference refer here
brainly.com/question/16098226#
#SPJ11
A duck flying south for the winter has a velocity of 10.0 m/s. if the duck is flying against a gust of northerly wind with a velocity of 2.5 m/s, what is the resultant velocity of the duck? [Consider north to be positive]
To find the resultant velocity of the duck flying south against a northerly wind, we need to consider both the duck's velocity and the wind's velocity. Since the duck is flying south (opposite of the positive direction), its velocity will be -10.0 m/s. The northerly wind has a velocity of 2.5 m/s (positive direction).
To find the resultant velocity, we simply add the two velocities together:
Resultant velocity = (-10.0 m/s) + (2.5 m/s) = -7.5 m/s
The negative sign indicates that the duck's resultant velocity is in the southward direction, and the magnitude of this velocity is 7.5 m/s. So, the duck is flying south with a resultant velocity of 7.5 m/s against the northerly wind.
you know more about the duck flying pls visit-
https://brainly.com/question/29754444
#SPJ11
why are white dwarf upernovae more useful for measuring cosmic distance than massive star supernovae
White dwarf supernovae are more useful for measuring cosmic distances than massive star supernovae because they are more consistent in their peak brightness.
Since massive stars have different luminosities, it is difficult to measure their distance. On the other hand, white dwarf supernovae have almost the same luminosity, which makes it easier to measure their distance. This is because white dwarf supernovae are created when a white dwarf star reaches a certain mass, and the process of reaching this mass is consistent and predictable.
This means that when a white dwarf supernova is observed, scientists can be more sure that its luminosity is consistent with other white dwarf supernovae. This makes them more reliable for measuring distance.
Know more about White dwarf supernovae here
https://brainly.com/question/30057297#
#SPJ11
a battery works because it group of answer choices pumps positive charge from its negative terminal to its positive terminal. creates positive charge. creates negative charge. pumps positive charge from its positive terminal to its negative terminal. it depends on the type of battery.
A battery is a device that converts chemical energy into electrical energy, which can then be used to power various electronic devices. The battery consists of two terminals, the positive and negative terminals, which are connected to the two electrodes in the battery.
The positive terminal is where the electrons leave the battery, while the negative terminal is where they enter.
When the battery is connected to a circuit, the chemical reactions inside the battery produce a flow of electrons from the negative to the positive terminal. This flow of electrons creates a potential difference between the two terminals, which can then be used to power the circuit. Therefore, it is incorrect to say that a battery pumps positive charge from its negative terminal to its positive terminal or vice versa. Rather, it produces a flow of electrons from the negative terminal to the positive terminal.
Different types of batteries work in different ways, but the fundamental principle remains the same. The key to the battery's operation is the chemical reaction that occurs inside it, which produces the flow of electrons between the terminals.
To know more about battery visit:
brainly.com/question/29605565
#SPJ11
a moth at about eye level is 11.1 cm in front of a plane mirror; you are behind the moth, 46.6 cm from the mirror. what is the distance between your eyes and the apparent position of the moth's image in the mirror?
The total distance between your eyes and the apparent position of the moth's image in the mirror is 57.7 cm. This is calculated by adding the distances from the mirror to the moth and from the mirror to your eyes.
To find the distance between your eyes and the apparent position of the moth's image in the mirror, we need to consider the individual distances involved. The moth is 11.1 cm in front of the mirror. Since plane mirrors create virtual images that appear to be the same distance behind the mirror as the object is in front of it, the moth's image will also appear 11.1 cm behind the mirror.
You are 46.6 cm behind the moth, so you are also 46.6 cm away from the mirror. To find the total distance between your eyes and the moth's image, we simply add these two distances together: 11.1 cm + 46.6 cm = 57.7 cm.
To know more about eye level visit:
https://brainly.com/question/31597596
#SPJ11
a straight wire of length tm is oriented east-west and is in a magnetic field b pointing north. the wire ismoving downward at a constant speed v. if the resistance of the rod is r, what is the current through the rod?
Answer:
I = V / r where I is current in rod with resistance r
V = W / Q work / unit charge
I = W / (r Q) combining equations
W = F x where F is force on wire and x distance traveled
I = F x / (r Q)
I = I L B x / (r Q) where I L B is force on moving wire
I = L B x / (t r) since I = Q / t charge / time
I = L B v / r since x is speed of moving wire
If tm is length of wire then
I = tm B v / r in terms of given quantities
70) At what temperature is the rms speed of hydrogen molecules, H2, which have a molecular weight of 2.02 g/mole, equal to 2.0 km/s? The Boltzmann constant is 1.38 × 10-23 J/K and NA = 6.022 × 1023 molecules/mol.
A) 17°C
B) 34°C
C) 51°C
D) 68°C
E) 72°C
The temperature at which the rms speed of hydrogen molecules is 2.0 km/s is approximately 51°C (324 K). Answer: C.
What is Temperature?
Temperature is a physical quantity that expresses the degree of hotness or coldness of a substance, usually measured on a scale such as Celsius or Fahrenheit. It is a measure of the average kinetic energy of the particles in a system. At higher temperatures, the particles have greater kinetic energy and move faster, while at lower temperatures they move more slowly.
We can use the formula for root mean square speed of gas molecules:
v(rms) = sqrt(3kT/m)
where k is the Boltzmann constant, T is the temperature in Kelvin, and m is the mass of the molecule.
Rearranging the equation to solve for temperature, we get:
m = 2.02 g/mol = 2.02 x [tex]10^{-3}[/tex] kg/mol
v(rms) = 2.0 km/s = 2.0 x [tex]10^{3}[/tex] m/s
k = 1.38 x [tex]10^{23}[/tex] J/K
T = (2.02 x [tex]10^{-3}[/tex] kg/mol * (2.0 x [tex]10^{3}[/tex]m/s)^2)/(3 * 1.38 x [tex]10^{-23}[/tex] J/K)
T = 51.3 K
Learn more about Temperature from the given link
https://brainly.com/question/26866637
#SPJ4
Write an equation in slope-intercept form of the line with the given parametric equations.
The equation of a line in slope-intercept form from its parametric equations, we need to eliminate the parameter by solving for it in one equation and substituting it into the other equation. The resulting equation will have the slope and y-intercept of the line.
To write the equation of the line in slope-intercept form from its parametric equations, we need to eliminate the parameter. Let's say the parametric equations are:
x = at + b
y = ct + d
where a, b, c, and d are constants. To eliminate t, we can solve for t in one of the equations and substitute it into the other equation. Let's solve for t in the first equation:
t = (x - b) / a
Now substitute this expression for t in the second equation:
y = c((x - b) / a) + d
Simplifying this equation gives:
y = (c/a)x - (cb/a) + d
This is the equation of the line in slope-intercept form, where the slope is c/a and the y-intercept is -cb/a + d.
In conclusion, to write the equation of a line in slope-intercept form from its parametric equations, we need to eliminate the parameter by solving for it in one equation and substituting it into the other equation. The resulting equation will have the slope and y-intercept of the line.
To know more about slope visit :
https://brainly.com/question/29140119
#SPJ11
Choose the experimental facts that confirm that photons possess wave-like properties. Please check all that apply! Check all that apply.
Doppler effect
The photoelectric effect
Single slit experiment
Compton scattering
Double slit experiment
The blackbody radiation spectrum
Answer: The experimental facts that confirm that photons possess wave-like properties are:
Single slit experimentDouble slit experimentThe blackbody radiation spectrumTherefore, you should check the following options:
Single slit experimentDouble slit experimentThe blackbody radiation spectrumA railroad handcar is moving along straight, frictionless tracks with negligible air resistance. In the following cases, the car initially has a total mass (car and contents) of 170 kg and is traveling east with a velocity of magnitude 5.50 m/s . Find the final velocity of the car in each case, assuming that the handcar does not leave the tracks.
A) An object with a mass of 20.0 kg is thrown sideways out of the car with a speed of 1.90 m/srelative to the car's initial velocity.
B) An object with a mass of 20.0 kg is thrown backward out of the car with a velocity of 5.50 m/srelative to the initial motion of the car.
C) An object with a mass of 20.0 kg is thrown into the car with a velocity of 5.90 m/s relative to the ground and opposite in direction to the initial velocity of the car.
Using the principle of conservation of momentum, we calculated the final velocities of a handcar after an object was thrown out, thrown backward, and thrown into it. The final velocities were 5.32 m/s to the east, 3.97 m/s to the west, and 4.12 m/s to the west, respectively.
To solve this problem, we need to use the principle of conservation of momentum, which states that the total momentum of a system is conserved in the absence of external forces. In this case, we can treat the handcar and its contents as a system, since there are no external forces acting on it.
Let's first calculate the initial momentum of the system. The momentum is given by the product of the mass and velocity, so the initial momentum is:
[tex]p_{initial} = m_{total} \times v_{initial[/tex]
where m_total = 170 kg is the total mass of the system and [tex]v_{initial[/tex] = 5.50 m/s is the initial velocity of the car.
A) When the object is thrown sideways out of the car, there is no change in the car's velocity since the object is moving perpendicular to the direction of motion. However, the momentum of the system changes because the object is leaving with some velocity. Let's call the mass of the object [tex]m_{object[/tex]= 20 kg and its velocity relative to the car [tex]v_{object[/tex] = 1.90 m/s. The momentum of the object is:
[tex]p_{object} = m_{object} \times v_{object[/tex]
The total momentum of the system after the object is thrown out is:
[tex]p_{final} = p_{initial} - p_{object}[/tex]
since the momentum of the object is leaving in the opposite direction of the initial velocity of the car, the final velocity of the car will be slightly smaller than the initial velocity, and its direction will be unchanged. Using the conservation of momentum equation, we can solve for the final velocity of the car:
[tex]p_{final} = m_{total} * v_{final[/tex]
[tex]v_{final} = p_{final} / m_{total}[/tex]
Substituting the values we have:
[tex]$v_{final} = \frac{m_{total} \cdot v_{initial} - m_{object} \cdot v_{object}}{m_{total}} = \frac{170 \text{ kg} \cdot 5.50 \text{ m/s} - 20.0 \text{ kg} \cdot 1.90 \text{ m/s}}{170 \text{ kg}} = 5.32 \text{ m/s}$[/tex]
Therefore, the final velocity of the car is 5.32 m/s to the east.
B) When the object is thrown backward out of the car, the momentum of the system changes since the object is leaving with some velocity in the opposite direction of the car's initial velocity. Let's call the velocity of the object relative to the car [tex]v_{object[/tex]= -5.50 m/s. The momentum of the object is:
[tex]p_{object} = m_{object} \times v_{object[/tex]
The total momentum of the system after the object is thrown out is:
[tex]p_{final} = p_{initial} - p_{object[/tex]
since the momentum of the object is leaving in the opposite direction of the initial velocity of the car, the final velocity of the car will be smaller and in the opposite direction. Using the conservation of momentum equation, we can solve for the final velocity of the car:
[tex]p_{final} = m_{total} \times v_{final[/tex]
[tex]v_{final} = p_{final} / m_{total[/tex]
Substituting the values we have:
[tex]v_{final} = \frac{m_{total} \cdot v_{initial} - m_{object} \cdot v_{object}}{m_{total}} = \frac{170 \text{ kg} \cdot 5.50 \text{ m/s} - 20.0 \text{ kg} \cdot (-5.50 \text{ m/s})}{170 \text{ kg}} = 3.97 \text{ m/s}$[/tex]
Therefore, the final velocity of the car is 3.97 m/s to the west.
C) When the object is thrown into the car, the momentum of the system changes since the object is entering with some velocity in the opposite direction of the car's initial velocity. Let's call the velocity of the object relative to the ground [tex]v_{object[/tex] = -5.90 m/s. The momentum of the object is:
[tex]p_{object} = m_{object} \times v_{object[/tex]
The total momentum of the system after the object is thrown in is:
[tex]p_{final} = p_{initial} + p_{object[/tex]
since the momentum of the object is entering in the opposite direction of the initial velocity of the car, the final velocity of the car will be smaller and in the opposite direction. Using the conservation of momentum equation, we can solve for the final velocity of the car:
[tex]p_{final} = m_{total} * v_{final[/tex]
[tex]v_{final} = p_{final} / m_{total[/tex]
Substituting the values we have:
[tex]$v_{final} = \frac{m_{total} \cdot v_{initial} + m_{object} \cdot v_{object}}{m_{total}}$[/tex]
[tex]\frac{(170\,kg \cdot 5.50\,m/s + 20.0\,kg \cdot -5.90\,m/s)}{170\,kg}[/tex]
= 4.12 m/s
Therefore, the final velocity of the car is 4.12 m/s to the west.
To learn more about momentum
https://brainly.com/question/30677308
#SPJ4
A free particle of momentum p 0
â
moving in one dimension is represented by a plane wave. A measuring apparatus determines that the particle lies inside a region of width D centered at x=0. The resulting interaction with the particle is assumed to leave the wave function unchanged for a width D, centered at x=0 but to reduce it to zero outside this region. In other words after the measurement the wave function is assumed to be zero for â£xâ£>D/2. What are the average momentum and the average kinetic energy of the particle after the measurement has been made? (Hint: the results of HW set 4, problem 3 ) may be useful.)
The average momentum of the particle after the measurement has been made is the same as before the measurement was made, namely p0. This is because the wave function is unchanged for a width D centered at x=0.
What is average momentum?Average momentum is the average of the momentum of all of the particles in a system. It is a measure of the total momentum in a given system and is calculated by taking the sum of the individual momentums of all the particles in the system and dividing it by the total number of particles. Average momentum is a vector quantity, meaning it has both magnitude and direction. It is often used in physics to describe the motion of a system of particles.
The average kinetic energy of the particle after the measurement has been made is given by the equation E = (p0²)/2m, where m is the mass of the particle. This is because the wave function is proportional to the momentum and therefore the kinetic energy is proportional to the square of the momentum.
To learn more about average momentum
https://brainly.com/question/30247376
#SPJ4
find the self-inductance of a 1800-turn solenoid 51 cm long and 4.0 cm in diameter. express your answer with the appropriate units.
The number of turns, [tex]\mu_0[/tex] is the permeability of free space, l is the length of the solenoid, and R is its radius. L = 0.0011 H (Henries)
What is solenoid?A solenoid is an electrical device consisting of a coil of wire wrapped around a hollow, cylindrical core. When an electric current is passed through the coil, a magnetic field is created that can be used to generate a force or move an object. The magnetic field of the solenoid is concentrated and localized, allowing it to be used for precise movements and controllable forces.
The self-inductance of a solenoid can be calculated using the formula
[tex]L = (N^2 * \mu_0 * l)/(R^2),[/tex]
where N is the number of turns, [tex]\mu_0[/tex] is the permeability of free space, l is the length of the solenoid, and R is its radius.
Plugging in the given values, we have:
[tex]L = (1800^2 * 4\pi*10^-7 * 0.51)/(0.02^2)[/tex]
L = 0.0011 H (Henries).
To learn more about solenoid
https://brainly.com/question/1873362
#SPJ4
a time-dependent but otherwise uniform magnetic field of magnitude b0(t) is confined in a cylindrical region of radius 7.5 cm. initially the magnetic field in the region is pointed out of the page and has a magnitude of 4.5 t, but it is decreasing at a rate of 8.5 g/s. due to the changing magnetic field, an electric field will be induced in this space which causes the acceleration of charges in the region.
When a magnetic field changes with time, it induces an electric field in the space around it. This is known as electromagnetic induction and is the basis for many technologies, including generators and transformers.
In this case, a uniform magnetic field of magnitude b0(t) is confined in a cylindrical region of radius 7.5 cm. Initially, the magnetic field is pointed out of the page and has a magnitude of 4.5 t, but it is decreasing at a rate of 8.5 g/s. As a result of the changing magnetic field, an electric field is induced in this space, which causes the acceleration of charges in the region.
The induced electric field is given by Faraday's law of electromagnetic induction, which states that the induced electric field is proportional to the rate of change of magnetic flux. In this case, the magnetic flux is changing due to the decreasing magnetic field, which leads to the induction of an electric field.
The electric field causes charges in the region to accelerate, which can lead to the production of current. The strength of the induced electric field and the resulting current depend on the rate of change of the magnetic field, the size of the region, and the properties of the materials in the region.
For more about electromagnetic:
https://brainly.com/question/17057080
#SPJ11
A solid plank with a uniform distribution of mass along its length rests on a platform with one end of the plank protruding over the edge. How far out can we push the plank before it tips? Explain.
a. Only about a third of the plank can hang over the edge before this mass results in a net torque.
b. None of the plank can protrude over the edge without resulting in a net torque.
c. About two-thirds of the plank can protrude over the edge without resulting in a net torque.
d. The plank can be pushed to its center point where the center of gravity is located without resulting in a net torque.
About two-thirds of the plank can protrude over the edge without resulting in a net torque. The correct answer is c.
The plank is resting on a platform with one end protruding over the edge. The mass of the plank is distributed uniformly along its length. Therefore, the center of gravity of the plank is located at the midpoint of the plank.
At some point, the force exerted on the end of the plank is greater than the weight of the mass that is displaced from the center of gravity of the plank, and the plank will start to tip over. The point at which this occurs is determined by the distribution of mass along the length of the plank and the geometry of the platform.
We can calculate the maximum distance that the plank can protrude over the edge before it tips by considering the center of gravity of the plank. When the center of gravity of the plank is located at the midpoint of the plank, the maximum distance that the plank can protrude over the edge is equal to the length of the plank. The correct answer is c.
Learn more about net torque Visit: brainly.com/question/30338139
#SPJ4
through how many volts of potential difference must an electron be accelerated to achieve a wavelength of 0.27 nm?
Answer: 1120673.9 volts
Explanation:
The de Broglie wavelength of an electron is given by the equation λ = h / (mv), where h is the Planck constant, m is the mass of the electron, and v is its velocity.
The kinetic energy of an electron can be calculated from the potential difference it is accelerated through, using the equation KE = qV, where q is the charge of the electron and V is the potential difference.
Setting these two equations equal to each other, we get λ = h / (mv) = h / √(2mKE).
Solving for V, we get V = KE / q = (h^2 / 2mq) / λ^2.
Substituting the given values, we get V = (6.626 x 10^-34 J.s)^2 / (2 x 9.109 x 10^-31 kg x 1.602 x 10^-19 C x (0.27 x 10^-9 m)^2)
Thus, V = 1120673.9 volts (approx).
What could have caused the planets to migrate through the solar system?.
Answer:
Explanation:
The orbit of a planet can change due to gravitational encounters with a large number of planetesimals.
If you double the mass of the block attached to a spring-block oscillator, what will happen to the frequency of the oscillation?
The frequency of an oscillator (f) is inversely proportional to the square root of the mass (m) attached to it. Mathematically, it can be represented as:
f ∝ 1/√m
This means that if you double the mass of the block attached to a spring-block oscillator, the frequency of the oscillation will decrease by a factor of √2, which is approximately 1.4. In other words, the oscillation will become slower and have a longer period. This relationship can be understood by considering that increasing the mass will increase the inertia of the system, making it harder for the spring to push and pull the mass back and forth at the same rate. Therefore, the frequency of the oscillation decreases as the mass increases.
To know more about mass please visit:
https://brainly.com/question/19694949
#SPJ11
A 110 g ball moving to the right at 4. 3 m/s catches up and collides with a 450 g ball that is moving to the right at 1. 2 m/s. If the collision is perfectly elastic, what is the speed
A 110 g ball moving to the right at 4.3 m/s catches up and collides with a 450 g ball that is moving to the right at 1.2 m/s. If the collision is perfectly elastic, then speed of the 110 g ball after the collision is 5.55 m/s to the right.
In an elastic collision, both momentum and kinetic energy are conserved.
Let's define the positive direction to be to the right.
Before the collision, the momentum of the system is
p = m1v1 + m2v2
p = (0.11 kg)(4.3 m/s) + (0.45 kg)(1.2 m/s)
p = 0.473 kg⋅m/s
After the collision, the momentum of the system is still to the right, and is given by
p' = m1v1' + m2v2'
Where v1' and v2' are the final velocities of the two balls.
Since the collision is elastic, kinetic energy is conserved as well, so we can write
(1/2)m1[tex]v1^{2}[/tex] + (1/2)m2[tex]v2^{2}[/tex] = (1/2)m1[tex]v1'^{2}[/tex] + (1/2)m2[tex]v2'^{2}[/tex]
Substituting the given masses and initial velocities, we get and Solving for v1', we get
v1' = 5.55 m/s
Therefore, the speed of the 110 g ball after the collision is 5.55 m/s to the right.
To know more about elastic collision here
https://brainly.com/question/2321300
#SPJ4
A 20 kg cart is pushed with a force of 40 N while it encounters a frictional force of 20 N. What is the cart's acceleration?A. 4 m/s2 B. 1 m/s2 C. 0 m/s2 D. 5 m/s2
The acceleration of the cart is 1 m/s^2.
According to Newton's second law of motion, the net force acting on an object is directly proportional to its acceleration, and the equation that represents this is F = ma, where F is the net force, m is the mass of the object, and a is the acceleration. In this problem, the cart has a mass of 20 kg, and it is being pushed with a force of 40 N, but it also encounters a frictional force of 20 N. Therefore, the net force acting on the cart can be calculated by subtracting the frictional force from the pushing force, which is 40 N - 20 N = 20 N. Using the equation F = ma, we can plug in the values for the net force and mass to find the acceleration, which is a = F/m = 20 N / 20 kg = 1 m/s^2. Therefore, the answer is B, 1 m/s^2. This means that for every second the cart is pushed, its speed increases by 1 meter per second.
To learn more about acceleration, click here:
https://brainly.com/question/12550364
#SPJ11
the aswan high dam on the nile river in egypt is 111 m high. what is the gauge pressure in the water at the foot of the dam? the density of water is 1000 kg/m3.
The gauge pressure at the foot of the Aswan High Dam is 1,088,100 Pascals (Pa). The gauge pressure can be calculated using the hydrostatic pressure formula.
Hydrostatic pressure is the pressure exerted by a fluid at rest due to the force of gravity. It can be calculated using the formula P = ρgh, where P represents the pressure, ρ is the density of the fluid, g is the acceleration due to gravity, and h is the depth or height of the fluid column.
In this case, the Aswan High Dam is 111 meters high, the density of water (ρ) is 1000 kg/m³, and the acceleration due to gravity (g) is approximately 9.81 m/s². By plugging these values into the formula, we get:
P = (1000 kg/m³) × (9.81 m/s²) × (111 m)
P = 1,088,100 Pa
Thus, the gauge pressure at the foot of the Aswan High Dam is 1,088,100 Pascals (Pa). This pressure results from the weight of the water column above the base of the dam and plays a crucial role in determining the structural stability of the dam as well as its ability to hold back the water in the Nile River.
Learn more about hydrostatic pressure here:
https://brainly.com/question/28206120
#SPJ11
5) At what, if any, temperature are the numerical readings on the Fahrenheit and Celsius scales the same?
A) -30°
B) -40°
C) -50°
D) -60°
E) They can never read the same because they are based on different zeroes.
They can never read the same because they are based on different zeroes on the Fahrenheit and Celsius scales the same.
What is Fahrenheit?Fahrenheit (°F) is a temperature scale used in the United States and a few other countries. It is named after the German physicist Daniel Gabriel Fahrenheit (1686–1736), who proposed it in 1724. On the Fahrenheit scale, the freezing point of water is 32 degrees, and the boiling point is 212 degrees. The scale is defined with the freezing point of water being 32 degrees and the boiling point of water being 212 degrees.
The Fahrenheit and Celsius scales both measure temperature, but they use different zeroes. The Fahrenheit scale uses a zero of 32°F for the freezing point of water and 212°F for the boiling point of water, while the Celsius scale uses a zero of 0°C for the freezing point of water and 100°C for the boiling point of water. This means that the numerical readings on the two scales will never be the same, no matter what temperature is being measured.
To learn more about Fahrenheit
https://brainly.com/question/30403835
#SPJ4
Does this graph show a function? Explain how you know.
-5
5
-5
5
A. Yes; there are no y-values that have more than one x-value.
B. Yes; the graph passes the vertical line test.
C. No; the graph.fails the vertical line test.
D. No, there are y-values that have more than one x-value.
No; the graph fails the vertical line test.
option C.
What is the vertical line test?The vertical line test is a graphical method used to determine if a given curve or graph represents a function.
It involves drawing a vertical line anywhere on the graph and observing whether the line intersects the curve at more than one point.
If a vertical line intersects the curve at only one point for all possible values of x, then the graph represents a function.
On the other hand, if a vertical line intersects the curve at more than one point for any value of x, then the graph does not represent a function.
So when we draw a single straight vertical line through the circular curve, it intersects at two points, so it does not show a function.
Learn more about the vertical line test here:
brainly.com/question/1821791
#SPJ1
the temperature coefficient of resistivity of platinum is 3.9x10^-3/degrees celsius. if a platinum wire has a resistance of r at room temperature (23 degrees celsius), to whattemperature must it be heated in order to double its resistance to 2r?
To double the resistance of a platinum wire from r to 2r, the temperature must be increased by a total of 86.2°C.
This is because the temperature coefficient of resistivity of platinum is 3.9x10^-3/°C, meaning that for every 1°C increase in temperature, the resistance of the wire increases by 3.9x10^-3. Therefore, for a total increase of 86.2°C, the resistance of the platinum wire will double from r to 2r. It is important to note that this value is a relative increase from the room temperature of 23°C, meaning that the final temperature must be 109.2°C in order for the resistance to double.
The temperature coefficient of resistivity of platinum is 3.9x10^-3/degrees celsius. if a platinum wire has a resistance of r at room temperature (23 degrees celsius), to what temperature must it be heated in order to double its resistance to 2r is 86.2°C.
Know more about resistance here
https://brainly.com/question/29427458#
#SPJ11
conservation of momentum: you are standing on a skateboard, initially at rest. a friend throws a very heavy ball towards you. you can either catch the object or deflect the object back towards your friend (such that it moves away from you with the same speed as it was originally thrown). what should you do in order to minimize your speed on the skateboard?
Conservation of momentum is a fundamental law in physics, which states that in a closed system, the total momentum remains constant. In the given scenario, if you catch the ball, the momentum of the system will change as you and the skateboard will start moving in the opposite direction to compensate for the momentum of the ball. On the other hand, if you deflect the ball back towards your friend, the momentum of the system will remain constant, but the direction of the momentum will change. In order to minimize your speed on the skateboard, it is recommended to deflect the ball back towards your friend. By doing so, the momentum of the system will remain constant, and the skateboard's speed will not increase. However, it is essential to ensure your safety and take precautions while performing such an experiment.
Hi there! To minimize your speed on the skateboard, you should deflect the object back towards your friend. Let me explain using conservation of momentum:
1. Initially, both you and the skateboard are at rest, so your total momentum is 0.
2. When the heavy ball is thrown towards you, it has a certain momentum (mass of ball × speed).
3. Conservation of momentum states that the total momentum before and after an interaction must be equal.
If you catch the ball, the momentum of the ball will be transferred to you, causing you and the skateboard to move at a higher speed. On the other hand, if you deflect the ball back with the same speed, the ball's momentum will be reversed in direction but maintain the same magnitude.
In this case, your final momentum will be the opposite of the ball's momentum, making the total momentum still 0. Therefore, deflecting the ball back towards your friend will minimize your speed on the skateboard.
To know more about skateboard visit
https://brainly.com/question/30552059
#SPJ11
what is the wavelength of a photon in the microwave range with a frequency of 2.60x 1011 hz?
Answer:
1.1538 mm
Explanation:
which one of the following types of electromagnetic wave travels through space the fastest? which one of the following types of electromagnetic wave travels through space the fastest? microwaves infrared ultraviolet radio waves they all travel through space at the same speed.
They all travel through space at the same speed. The speed of electromagnetic waves in a vacuum (such as space) is approximately 299,792,458 meters per second, which is often referred to as the speed of light. Therefore, all types of electromagnetic waves, including microwaves, infrared, ultraviolet, and radio waves, travel at the same speed through space.Electromagnetic waves are a type of energy that consists of oscillating electric and magnetic fields that travel through space at the speed of light. They are produced by the acceleration of electric charges, such as electrons, and are characterized by their wavelength, frequency, and energy.
Electromagnetic waves can be classified based on their frequency or wavelength, and this determines their properties and uses. The electromagnetic spectrum is the range of all possible frequencies of electromagnetic waves.
The electromagnetic spectrum includes radio waves, microwaves, infrared radiation, visible light, ultraviolet radiation, X-rays, and gamma rays. Radio waves have the longest wavelength and lowest frequency, while gamma rays have the shortest wavelength and highest frequency.
Electromagnetic waves have a wide range of applications in various fields, including communication, medicine, and technology. Radio waves are used for communication, such as broadcasting and mobile communication. Infrared radiation is used in remote sensing, thermal imaging, and heating. Visible light is the only part of the electromagnetic spectrum that can be seen by the human eye and is used for illumination and imaging. X-rays and gamma rays are used in medical imaging and radiation therapy.
However, exposure to high levels of electromagnetic radiation can be harmful to living organisms, and precautions are taken to ensure safe use in applications such as medical imaging and communication.
To know more about electromagnetic waves visit:
https://brainly.com/question/29774932
#SPJ11
8) Nitrogen boils at -196°C. What is the corresponding temperature in the Fahrenheit scale?
A) -315°F
B) -196°F
C) -346°F
D) -290°F
E) -321°F
According to the question the corresponding temperature in the Fahrenheit scale -346°F.
What is Fahrenheit?Fahrenheit is a temperature scale that was developed by the German physicist Daniel Gabriel Fahrenheit in the early 18th century. Fahrenheit is the most widely used temperature scale in the United States, with temperatures being measured in degrees Fahrenheit (°F). In Fahrenheit, the freezing point of water is 32°F and the boiling point is 212°F.
To convert a temperature from Celsius to Fahrenheit, use the equation F = (C × 9/5) + 32.
In this case, we can plug in -196°C for C and solve for F: F = (-196 × 9/5) + 32 = -346°F.
To learn more about Fahrenheit
https://brainly.com/question/30403835
#SPJ4
could newton laws or keplers 3rd law be applied to the hot gas orbiting the nucleus of m87 to determine the mas of the central black hole
Both Newton's laws and Kepler's third law can be used to estimate the mass of the black hole in M87, and combining the information obtained from both methods has led to the discovery that the black hole is approximately 6.5 billion times the mass of the sun.
Yes, both Newton's laws and Kepler's third law can be used to determine the mass of the central black hole in M87 by analyzing the motion of the hot gas orbiting the nucleus.
Newton's laws of motion can be applied to the orbiting gas to determine the centripetal force acting on it, which is related to the gravitational force between the gas and the central black hole. This, in turn, can be used to calculate the mass of the black hole.
Kepler's third law can also be used to determine the mass of the black hole by analyzing the orbital period and distance of the gas from the black hole. The law states that the square of the orbital period is proportional to the cube of the semi-major axis of the orbit, which can be used to calculate the mass of the black hole.
By combining the information obtained from both methods, astronomers have been able to estimate the mass of the central black hole in M87 to be approximately 6.5 billion times the mass of the sun. This groundbreaking discovery was made possible by the Event Horizon Telescope, which is a network of telescopes that are able to observe black holes and their surroundings in unprecedented detail.
To learn more about black holes
https://brainly.com/question/31869219
#SPJ4
A person holding a GDL license must take training classes if this happens?
In many jurisdictions, a person holding a Graduated Driver's License (GDL) is required to take training classes if certain events occur.
These events may include traffic violations, accidents, or other incidents that demonstrate a need for further education or training. The specific requirements and consequences of failing to complete these classes vary depending on the jurisdiction and the severity of the situation.
In some cases, failure to complete required training classes can result in the revocation or suspension of the GDL license, which can significantly impact a person's ability to drive legally and safely. It is important for individuals with a GDL license to understand the specific requirements in their jurisdiction and to take steps to meet those requirements if necessary.
Taking training classes can not only help GDL holders meet legal requirements but can also improve their driving skills and reduce the risk of future accidents or violations. It is always recommended to take advantage of any available training opportunities to become a safer and more responsible driver.
To know more about Graduated Driver's License click here:
https://brainly.com/question/14312700
#SPJ11
The index of refraction of a substance is:
A.the speed of light in the substance
B.the angle of refraction
C.the angle of incidence
D.the speed of light in vacuum divided by the speed of light in the substance
E.measured in radians
The index of refraction of a substance is: the speed of light in vacuum divided by the speed of light in the substance.
What is speed ?Speed is the rate of movement or action, typically measured in units such as miles per hour or seconds per mile. It can also refer to the rate of change of an object's position over time, or the rate at which an action takes place. In physics, speed is the magnitude of the velocity of an object, or the rate of change of its position. Speed is a scalar quantity, meaning it has magnitude but not direction. It is measured in units such as miles per hour (mph) or meters per second (m/s).
To learn more about speed
https://brainly.com/question/3004254
#SPJ4
