a close inspection of an electric circuit reveals that a 480 ohm resistor was inadvertrently soldered in the place where a 350 ohm resistor is needed. how can this be fixed without removing anything from the exsiting circuit?

A torque tends to impart rotational motion to an object and is responsible for keeping the object in rotation.

Torque in rotational motion is the same as force in linear motion. It is the main factor that maintains an object's rotation. An object rotates at an acceleration inversely proportional to its moment of inertia when a torque is applied to it. Torque is mathematically determined by:

Γ= Ia

where, I is the moment of inertia and a is the acceleration with which the object rotates. Torque has both magnitude and direction and is, thus, a vector quantity. Torque is expressed in Newton metre or Nm.

To know more about torque, refer:

https://brainly.com/question/16191604

#SPJ4

The following statement "The amount of energy required to remove an electron from an isolated atom or molecule is the Ionization potential. There is an ionization energy for each successive electron removed" is true.

A molecule is a collection of two or more atoms bound together by chemical bonds; depending on the context, the phrase may or may not include ions that meet this definition.

In quantum physics, organic chemistry, and biochemistry, the difference between ions and molecules is lost, and the term molecule is frequently used to refer to polyatomic ions. A molecule can be homonuclear, consisting of atoms of one chemical element, such as two atoms in the oxygen molecule (O2), or heteronuclear, consisting of more than one element.

To know more about Molecule here-

https://brainly.com/question/19922822

#SPJ4

Using the formula for the frequency of harmonics in an air-filled pipe, we can write:f_n = nv/(2L), where the pipe's length L, the air's sound speed (v), and harmonic number (n) are all variables.

Solving for L, we get:L = nv/(2f_n)For the third harmonic (n=3), we have:L = (3v)/(2f_3) = (3343 m/s)/(21120 Hz) = 0.137 m or 13.7 cm.

Using the given harmonic frequencies, we can determine the length of the pipe by applying the formula: wavelength = speed of sound / frequency.

From this, we can calculate the wavelengths of each harmonic and determine the ratio of their wavelengths. The ratio of the wavelengths will be in the form of 1:3:5 for the 1st, 2nd and 3rd harmonics respectively.

We can then use this ratio to determine the length of the pipe using the formula: length = wavelength x (n/2), where n is the harmonic number.

Therefore, the length of the pipe is approximately 13.7 cm. Using the given harmonic frequencies,

Learn more about pipe here:

https://brainly.com/question/13061470

#SPJ4

The following are incorrect estimates of Earth's distance to the Sun:

Revolution is the name for the earth's fixed orbital motion around the sun.

The Sun's gravitational force causes the Earth to revolve, creating an elliptical orbit.

Thus, the following are incorrect estimates of Earth's distance to the Sun:

To know more about the revolution of earth, here

https://brainly.com/question/30337265

#SPJ1

To prevent the kid from slipping, static friction needs to be at least 1 coefficient.

A force called static friction prevents an object from moving along the path. This friction happens when two materials are slid over one another. Conflict is there all around us. For instance, when we walk, our feet are in contact with the ground.

Newton's second rule of motion can be used to calculate the amount of force needed to prevent the kid from slipping:

ΣF = ma

where ΣF is the sum of the forces acting on the child, m is the mass of the child, and a is the acceleration of the child. Since the child is not slipping, the force of static friction f must equal the force of gravity on the child Fg:

f = Fg

where Fg = mg, and g is the acceleration due to gravity.

The acceleration of the child can be expressed in terms of the angular acceleration of the merry-go-round, α, using the formula:

a = rα

where r is the distance of the child from the center of the merry-go-round.

The angular acceleration can be found from the time it takes for the merry-go-round to make one complete revolution, T, using the formula:

α = 2π / T

Substituting these values into the equations above, we get:

f = Fg

μs N = mg

μs mg = mg

μs = 1

To know more about static friction visit:-

https://brainly.com/question/13000653

#SPJ1

The same as long as the other variables in the equation (Cd, A, and rho) remain unchanged.

A variable is a symbolic name that represents a value that can be changed. Variables are used in programming to store values that can be used throughout the program or in specific functions. Variables can be any type of data including numbers, strings, Booleans, and objects.

The magnitude of the force caused by air resistance, fr, in Newtons is determined by the drag equation: fr = 0.5*Cd*A*rho*v^2, where Cd is the drag coefficient, A is the frontal area, rho is the density of the air, and v is the velocity. Since the truck's velocity is assumed to be constant, the magnitude of the force caused by air resistance (fr) will remain the same as long as the other variables in the equation (Cd, A, and rho) remain unchanged.

To learn more about variables
https://brainly.com/question/29571075
#SPJ1

When the charge is at point b, the potential energy is 30 j, and the voltage produced at point b by the other charges is 25 volts.

We can use the formula for potential energy in an electric field to relate the change in potential energy to the difference in voltage between the two points:

ΔU = qΔV

here,

ΔU is change in potential energy,

q is charge, and

ΔV is difference in voltage.

We are given that

q = 2 C, and

That the change in potential energy

= ΔU = 30 J.

Therefore, we can solve for the difference in voltage between points a and b:

ΔV = ΔU / q

ΔV = 30 J / 2

ΔV = 15 V

This means that the voltage at point b is

10 V + 15 V = 25 V,

because the potential energy when the charge is at point b is 30 J higher than at point a.

Therefore, the voltage created by the other charges at point b is 25 volts.

To know more about potential please refer: https://brainly.com/question/24284560

#SPJ4

The correct option is B. Her trajectory will her center of mass be 1.0 seconds later at the apex.

[tex]V = V_0 - g*t[/tex]

where,

[tex]V_0 = initial velocity[/tex]

acceleration due to gravity  = 9.8 m/s^2

t = 1.0 seconds

substituting the above values in the equation;

[tex]V_0 = 9.8 m/s + 9.8m/s^2*1.0 sec\\V_0 = 19.6 m/s[/tex]

**Hence after 1.0 sec the gymnast would almost reach 19.6 m as distance.

According to the trajectory of mass thrown uniformly,

[tex]H_(max)= v^2/ 2*g = 19.6^2/2*9.8 = 19.6 m[/tex] ----> indicates the mass reaches the peak after a time of 1.0 seconds

Speed is the directional velocity of an item in motion as an indication of its price of exchange in the role as located from a selected frame of reference and as measured through a specific widespread of time (e.g. 60 km/h northbound). speed is a fundamental concept in kinematics, the branch of classical mechanics that describes the motion of our bodies.

Velocity is a physical vector amount; both value and route are had to outline it. The scalar absolute value (magnitude) of velocity is referred to as pace, being a coherent derived unit whose quantity is measured in the SI (metric system) as meters according to 2nd (m/s or m⋅s−1). as an example, "five meters per 2d" is a scalar, while "five meters in keeping with 2d east" is a vector. If there may be a change in velocity, course, or both, then the object is said to be present process an acceleration.

To learn more about Velocity visit here:

brainly.com/question/30559316

#SPJ4

Complete Question:

If a gymnast leaves the ground with a vertical velocity of 9.81 m/s when doing a back flip, where in her trajectory will her center of mass be 1.0 sec later? Show the equation applied!

a) Approaching the apex

b) at the apex

c) descending from the apex

d) on the ground

e) not enough information

The capacity to perform work, which entails applying force to move an object across a distance, is another definition of energy. Energy is moved from one item to another while work is done. Thus, option B is correct.

The definition of energy as the “power to accomplish work" refers to the capacity to apply a force that moves an object.

Any force that is exerted on an object, whether by a person or another object, is referred to as an applied force. An applied force is exerted on an object when someone pushes it across the room.

Energy is referred to by scientists as the capacity to work. Modern civilization is made possible by the discovery of how to change energy from one form to another and use it to complete activities.

Therefore, the ability to use an applied force to make an object move.

Learn more about energy here:

https://brainly.com/question/28727910

#SPJ1

The length of beam such that the beam balances when a fulcrum is placed below the beam a distance 1.10 m from the 30.0-kg child is 2.07m

To calculate this, we can use the equation for moment of inertia:

We know that the M = (m1 × d1) + (m2 × d2)

Where m1 and m2 are the masses of the two children and d1 and d2 are the distances from the fulcrum to either child.

In this case, m1 = 30.0 kg, m2 = 40.0 kg, d1 = 1.10 m and d2 is the variable we are solving for.

So, we can rearrange the equation to solve for d2:

d2 = (M - (m1 × d1)) / m2

d2 = (0 - (30.0 kg × 1.10 m)) / 40.0 kg

d2 = -2.07 m

Therefore, the length of the beam is 2.07 m.

To learn more about distance click here https://brainly.com/question/29678788

#SPJ4

The energy associated with movement is Kinetic Energy, while energy that is stored is Potential Energy.

Two types of energy—kinetic energy and potential energy—describe the condition of a system. While potential energy is the energy stored in an object or system based on its location or configuration, kinetic energy is the energy of motion.

The energy that an object has as a result of motion is known as kinetic energy. The formula KE=1/2mv2 can be used to calculate an object's kinetic energy, which depends on its mass and speed. In this instance, m stands for the object's mass and v for its speed. An object has more kinetic energy the faster it moves. For instance, a moving vehicle has more kinetic energy than a vehicle that is stationary.

On the other hand, potential energy is the energy that an object has as a result of its position or configuration. It is frequently referred to as the energy that a thing possesses as a result of its capacity for labor. Gravitational potential energy, or the energy an item has as a result of its position with respect to a reference point like the ground, is the most typical illustration of potential energy. A lower-altitude item has less gravitational potential energy than a higher-altitude object. PE=mgh, where m is the object's mass, g is the acceleration brought on by gravity, and h is the object's height above the reference point, is the formula for gravitational potential energy.

To know more about Kinetic vs Potential energy visit:

https://brainly.com/question/14959619

#SPJ4

The frictional force acting on the box is just opposite to the normal force acting on the box by its weight. Here, the frictional force is,

Friction is a kind force that opposes the normal force acting on an object. The frictional force, is a resistive force having a negative sign always. The frictional force increases as the roughness of the surface through which the object is moving.

Here, the mass of the box m = 11.54 kg

angle of sliding  = 31.04 °

acceleration due to gravity of earth = 9.8 m/s²

The frictional force that opposes the motion of the box sliding down the surface is just opposite to the normal force on the box by its own weight.

F = - mg cosθ

  = - 11.54 kg ×  9.8 m/s² × 31.04°

  = -105.9 N

Therefore, the frictional force acting on the box is -105.9 N.

Find more on friction:

https://brainly.com/question/9450295

#SPJ1

Answer:

The action that would cause the concentration of a solution to remain constant is removing solution from the container.

What is concentration of a solution?

The concentration of a solution is the measure of the amount of solid particles (solute) that has been dissolved in the given amount of a solvent.

Adding water to a solution will dilute the solution, hence changes the concentration of the solution.

Also, adding solute will change the concentration of the solution.

Thus, the action that would cause the concentration of a solution to remain constant is removing solution from the container.

Paki-brainliest po:) #CarryOnLearning

This is based on a location's latitude. As latitude rises, the sun's rays' angle with the earth's surface decreases, resulting in slanted sunrays. Vertical rays always cover less area than rays that are angled.

The amount of incoming solar energy that is accessible varies on the longitude, day of the year, time of day, and degree of cloud cover. The amount of solar energy received at a given latitude would not change throughout the year if the earth were not tilted from the vertical.

The solar radiation that reaches the surface of the earth is known as insolation. The quantity of solar energy absorbed per square centimeter every minute is used to calculate it.

Therefore, the amount of insolation (incoming solar energy) that is received each day mostly relies on. the Sun's angle above the horizon, also known as the solar incidence angle. the amount of time the surface is exposed to the Sun, as well as the atmosphere.

Learn more about solar radiation here:

https://brainly.com/question/16525532

#SPJ4

The mass [tex]m_{2}[/tex] of the hanging block is 20 kg.

A body of coherent matter, typically of undefined form and structure, or maybe even a grouping of incoherent components, components, or things viewed as comprising one body.

Suddenness of movements or operation; promptness; quickness as well as mechanical the measured or counted at which a body's position changes in a specific direction.

For this it is important to assume a tension value, otherwise, it is impossible to determine the value of mass m, in Newton's second law equation.

According to the question,

Initial velocity, [tex]$V_o=0 \mathrm{~m} / \mathrm{s}$[/tex]

Time, t = 3 sec

We know,

[tex]$\Rightarrow y=v_o \times t+0.5 \times a \times t^2$[/tex]

By substituting the values,

0.01 = [tex]0.5 \times a \times(3)^2 \\[/tex]

a = 0.0022 m / [tex]\mathrm{s}^2[/tex]

Hence, T- mg = ma

or,

[tex]$\Rightarrow m & =\frac{T}{g-a} \\[/tex]

[tex]$& =\frac{196}{9.81-0.00222} \\[/tex]

= 20 kg

Therefore the answer is 20 kg.

For more questions on mass

https://brainly.com/question/14782980

#SPJ4

Two stars are of equal luminosity. Star A is 3 times as far from you as star B. Star A appears the same brightness as star B.

What is luminosity?
Luminosity is a measure of the amount of energy that is emitted by a star or other celestial object, usually measured in terms of its brightness. It is related to the star's surface area and temperature, as well as its distance from the observer. Luminosity is an important factor in determining the evolution of a star and its eventual fate.

Therefore, Two stars are of equal luminosity. Star A is 3 times as far from you as star B. Star A appears the same brightness as star B.

To learn more about luminosity

Here: https:brainly.com/question/26223390

#SPJ4

Answer:

Explanation:

If both the speed and stopping distance of a driver are doubled, the force exerted on the driver will be reduced by a factor of 2 (or 50%).

The force exerted on the driver when stopping a car is given by the formula:

[tex]F = (mv^2) / (2d)[/tex]

Where:

m = mass of the car

v = velocity of the car before braking

d = stopping distance

If both the speed and stopping distance of the car are doubled, then the new velocity and stopping distance will be 2v and 2d, respectively. Therefore, the new force exerted on the driver will be:

[tex]F' = (m(2v)^2) / (2(2d))[/tex]

[tex]F' = (4mv^2) / (4d)[/tex]

[tex]F' = (mv^2) / d[/tex]

Comparing this to the original formula for force, we can see that the new force exerted on the driver is simply half of the original force:

[tex]F' = (mv^2) / d = 1/2 * (mv^2) / (1/2 * d) = 1/2 * F[/tex]

For more such questions on force

https://brainly.com/question/862529

#SPJ4

While a theory is a group of closely related phenomena or observations, hypothesis is a logical idea that can be tested.

How would you define hypothesis?

An assumption or concept is given as a hypothesis for the purpose of debating it and testing if it might be true. In the scientific process, the hypothesis is developed before any pertinent research—aside from a basic background review—has been conducted.

In addition to explaining existing facts, a theory also enables scientists to forecast what observations they should expect to see if the theory is correct. Scientific hypotheses can be tested. A theory should be consistent with new data.

To learn more about hypothesis use:

https://brainly.com/question/606806

#SPJ1

C.S. Lewis believed that science and magic are distinct and incompatible ways of knowing and interacting with the world

C.S. Lewis believed that science and magic are distinct and incompatible ways of knowing and interacting with the world. Science is concerned with understanding the natural world through observation and experimentation, while magic is a form of supernatural power that operates outside the laws of nature.

Lewis also believed that science and magic have different ethical implications. Science is morally neutral, while the use of magic often has negative consequences and can lead to a desire for power and control.

In his fiction, such as the Chronicles of Narnia series, Lewis often used the contrast between science and magic to explore larger philosophical and spiritual themes.

Learn more about Science and magic:https://brainly.com/question/15627083

#SPJ1

The angular velocity of the wheel is 0.9286 radians/sec and the number of revolutions per minute is 8.84 rpm

The angular velocity of the wheel in radians per second is given by the formula:

ω = v/r where ω is the angular velocity in radians per second, v is the linear velocity in cm/s, and r is the radius of the wheel in cm.

Therefore, the angular velocity of the wheel is:

ω = 13 cm/s / 14 cm = 0.9286 radians/sec

To calculate the revolutions per minute (rpm), we use the formula:

rpm = ω * 60 / (2π)

where 2π is the number of radians in a full revolution.

Therefore, the wheel will spin at a rate of:

rpm = 0.9286 radians/sec * 60 / (2π) = 8.84 rpm

To learn more about angular velocity click here https://brainly.com/question/29557272

#SPJ4

The temperature of the beer if left out for 20 mins would be 53.1°F.

We can use Newton's law of cooling to estimate how warm the beer will be after 20 minutes. Newton's law of cooling states that the rate of change of the temperature of an object is proportional to the difference between the object's temperature and the temperature of its surroundings. In this case, the rate of change of the beer's temperature is:

d(T)/dt = k(T - T_s)

where T is the temperature of the beer, T_s is the temperature of the surroundings, and k is a constant of proportionality.

From the problem, we know that the initial temperature of the beer is T(0) = 35°F and that it warms up to T(3) = 40°F in 3 minutes. Therefore, we can use this information to find the value of k:

k = [T(3) - T(0)] / [(T(3) - T_s) * t] = [40 - 35] / [(40 - 70) * 3] = 1/30

Now we can use this value of k to estimate the temperature of the beer after 20 minutes:

T(20) - T_s = [T(0) - T_s] * exp(-kt) = (35 - 70) * exp(-(1/30)*20) = -35 * exp(-2/3) ≈ -16.9°F

Therefore, the temperature of the beer after 20 minutes will be approximately 70°F - 16.9°F = 53.1°F.

More on Newton's law of cooling can be found here: https://brainly.com/question/14643865

#SPJ1

The nearest star is approximately 40.1 trillion kilometers away from us.

The nearest star is located 4.4 light-years away from us. Since one light-year is defined as the distance that light travels in one year and light travels at a speed of 300,000 km/s.

we can calculate the distance to the nearest star in kilometers by multiplying the speed of light by the number of seconds in a year and then multiplying by 4.4:

Distance to nearest star = 300,000 km/s * 60 seconds/minute * 60 minutes/hour * 24 hours/day * 365 days/year * 4.4 years

                           = 40,152,000,000,000 kilometers

Therefore, the nearest star is approximately 40.1 trillion kilometers away from us.

To learn more about light-years:

https://brainly.com/question/76984

#SPJ4

Answer:

We can use the density equation to find the mass of 334 ml of water.

Explanation:

Given that the density of water is 1 g/ml, we can substitute the values into the density equation:

ρ = m/v

ρ = 1 g/ml

v = 334 ml

So, m = ρ x v

m = 1 g/ml x 334 ml

m = 334 g

Therefore, the mass of 334 ml of water is 334 g, which is answer option A: 334 grams of water.

The amount of moles of gas n=RT PV using the Ideal gas equation

​P ′ = 2P new pressure

T ′ = 2T new temperature

V ′ =V/2 new volume

Hence, the number of moles of gas n ′ =  (2P)/(V/2) / R(2T) (2P)(V/2) = n/2

When all other variables are held constant, pressure is directly proportional to force (F) and inversely proportional to area (A). As a result, when Area A is doubled, the pressure is cut in half. Area A is cut in half. The pressure P has been doubled. At STP (standard temperature, 273.15 K and pressure, 1 atm), the volume of 1.00mol of any gas is measured to be 22.414L. 1 atm equals 760 mm Hg. The Pascal, on the other hand, is the standard international unit for pressure. 1 atm Equals 101325 Pa. The English physicist Robert Boyle conducted a series of pressure tests and arrived at a general law—that the volume of a gas varies inversely with pressure—in 1662. PV stands for constant.

Learn more about proportional to force  from here;

https://brainly.com/question/22369315

#SPJ4

​

The statement that is incorrect is: The time interval between conditions of maximum potential energy is one period.

The time interval between conditions of maximum potential energy is not always one period. The period of a pendulum is the time it takes for the pendulum to complete one full cycle of motion, which is determined by the length of the pendulum and the acceleration due to gravity. The time interval between conditions of maximum potential energy depends on the initial conditions of the pendulum, such as the initial angle and the initial velocity. If the initial angle or the initial velocity is changed, then the time interval between conditions of maximum potential energy will change as well.

To learn more about potential energy click here https://brainly.com/question/24284560

#SPJ4

The magnetic force between the two wires is larger than the force of the Earth's magnetic field on each wire.

The magnetic force between the two wires is larger than the force of the Earth's magnetic field on each wire. The magnetic force between the two wires can be calculated using the formula

F = μ * I1 * I2 * L / 2 * d

here,

μ is magnetic constant

I1 and I2 are current of each wire,

L is length of each wire,

d is distance between the wires.

Reserving the values,

= F

= [tex]4 * \pi * 10^-^7 * 400 * 400 * 5 / 2 * 5[/tex]

= 0.16 N.

On the other hand, the force of the Earth's magnetic field on each wire can be calculated using the formula:-

F = μ * B * I * L,

here,

B is Earth's magnetic field strength.

Reserving the values,

= F

= [tex]4 * \pi * 10^-^7 * 5 * 10^-^5 * 400 * 5[/tex]

= 0.04 N.

Therefore, the magnetic force between the two wires is larger than the force of the Earth's magnetic field on each wire.

To know more about force please refer: https://brainly.com/question/16663505

#SPJ4

The evolution that is shown in the picture that we have here is the evolution of humans from Chimpanzees.

Evolution is the process by which species of living organisms change over generations through a combination of genetic variation, mutation, natural selection, and genetic drift. The theory of evolution explains how species have changed over time to become the diverse forms that exist today, and provides a scientific explanation for the relatedness of different species.

The evidence in the picture tells us that came to be through mutations and generic drift from the Chimpanzee.

An example of evolution would be: evidence that is gotten from fossils.

Read more on evolution here:https://brainly.com/question/27748371

#SPJ1

The object is moving away from the origin at a constant velocity.

option A.

Constant velocity refers to a situation in which an object moves at a constant speed in a straight line. This means that the magnitude of the velocity (i.e. the speed) of the object remains the same over time, while its direction may or may not change.

For example, a car moving at a constant 60 km/h on a straight road has a constant velocity.

Uniform velocity on the other hand, refers to a situation in which an object moves with a constant speed, but also changes its direction. I

In the graph, between 4 and 6 seconds, the object is moving at a constant velocity.

Learn more about constant velocity here: https://brainly.com/question/529176

#SPJ1

Answer:

Weight on Mars =  55.5 Newtons

Approximately 37.72% of weight on earth

Explanation:

Mass of an object is unchanged throughout the universe

Therefore mass on Mars = mass on Earth = 15kg

Weight = mass x freefall acceleration

Weight on Earth = 15 kg x 9.81 m/s² = 147.15 Newtons (N)
Weight on Mars = 15 x 3.7 m/s² = 55.5 N

Therefore weight on Mars/ weight on earth = 55.5 N/147.15N

≈ 0.3772

= 37.72 % of weight on earth