After reducing the starting volume, the gas has a resultant pressure of 3 atm.
Describe Boyle's Law.
Boyle's Law states that a gas's pressure is inversely proportionate to its volume at constant temperature:
P ∝ 1/V
The necessary equation for the posed question is:
P1V1 = P2V2, and
Initial pressure is P1 and is 1.5 atm.
Initial volume = 2 L for V1.
final pressure = P2 =?
Final volume = 1 L, or V2.
Using the aforementioned equation and all of these data, we obtain
P₂ = [tex]\frac{(1.5x2)}{1}[/tex]= 3atm
Therefore, 3 atm of pressure is needed.
Learn more about Boyle's law here https://brainly.com/question/19491032
#SPJ10
Which of the mentioned are the principal constituents of an organic compound?
O
O
O
Carbon, Oxygen and Nitrogen
Carbon, Oxygen and Hydrogen
Carbon, Oxygen and Sulphur
Carbon, Oxygen and Sulphur
Answer:
the basic element of organic compounds is carbon and they are called organic because associate with the living organism so the correct answer is
Which conclusion is consistent with the following net ionic equation? co2+(aq) + s2-(aq) cos(s)
The conclusion that is consistent with the ionic equation would be that COS (s) is a precipitate.
What is a precipitation reaction?It is a reaction in which 2 soluble salts in aqueous forms react to produce an insoluble salt as one of the reaction's products.
Precipitate products are usually insoluble and can be filtered off using suitable filter paper. In other words, they are solids that are suspended in solution.
Following the ionic reaction, the two reacting ions are in aqueous forms while the product formed is solid.
More on precipitation reactions can be found here: https://brainly.com/question/24158764
#SPJ1
Why are reaction orders not always equal to the coefficients in a balanced chemical equation?
The reaction order is given as the relationship between the concentrations of the reactants and the rate of a reaction.
The order of a rate law is the sum of the exponents of the concentration of the reactants.The rate law of a reaction is used to understand the composition of the reaction mixture. Specifically, the reaction order is the exponent to which the concentration of that reactants are raised, and it indicates that how well the concentration of a reactants affects the rate of a reaction.There are number of methods used to determine the reaction order. Reaction orders not always equal to the coefficients in a balanced chemical equation , it only determined the number of molecules per mole present in a given reaction.Learn more about order of reaction here..
https://brainly.com/question/8139015
#SPJ10
can y'all please help me with this
Answer:
C=8,H=8 and O =3
Explanation:
As the formula is given.
A car's tires are inflated to 2.11 atm at 25c. after driving to the grocery store, the tires are at 2.25 atm. what is the temperature of the air in the tire after the drive?
Answer:
T₂ = 26.7 °C
Explanation:
Because you are dealing with pressure and temperature, you can use Gay-Lussac's Law to find the final answer. The equation looks like this:
P₁ / T₁ = P₂ / T₂
In this form, "P₁" and "T₁" represent the initial pressure and temperature. "P₂" and "T₂" represent the final pressure and temperature. You have been given the values for all of the variables but "T₂". Therefore, by plugging these values into the equation, you can simplify to find "T₂".
P₁ = 2.11 atm T₁ = 25 °C
P₂ = 2.25 atm T₂ = ?
P₁ / T₁ = P₂ / T₂ <--- Gay-Lussac's Law equation
(2.11 atm) / (25 °C) = (2.25 atm) / T₂ <--- Plug variables into equation
0.0844 = (2.25 atm) / T₂ <--- Divide 2.11 by 25
(0.0844) x T₂ = 2.25 atm <--- Multiply both sides by T₂
T₂ = 26.7 <--- Divide both sides by 0.0844
Considering the activity series given below for metals and nonmetals, which reaction will occur? Al > Mn > Zn > Cr > Fe > Cd > Co > Ni > Sn > Pb > H > Sb > Bi > Cu > Ag > Pd >Hg > Pt F > Cl > Br > I
(a) 2NaBr + I2 --> 2NaI + Br2
(b) 2Fe + Al2O3 --> 2Al + Fe2O3
(c) 2AgNO3 + Ni --> Ni(NO3)2 + 2Ag
(d) Pb + Zn(C2H3O2)2 --> Zn + Pb(C2H3O2)2
(c) 2AgNO3 + Ni --> Ni(NO3)2 + 2Ag
pls help.
Dr. AT is studying the effect playing music has on plant growth. To do this she sets up three greenhouses each growing pea plants. One of the greenhouses plays classical music to the plants all day, the second greenhouse plays pop music, while the third is silent. All other factors, such as water and sunlight are identical between the three greenhouses. After two weeks, Dr. AT measures each pea plant and records her data. What greenhouse is the control group in this experiment?
A. The silent greenhouse.
B. The pop music greenhouse.
C. The classical music greenhouse.
D. The height of the plants.
Answer:
c or d
Explanation:
it says it was playing classic music
In this case, the control group or control variable is the greenhouse where the plants are grown in silence, as this group does not receive any music treatment. Therefore, the correct answer is A.
Variables can be defined as any characteristics, number or a quantity that can be measured . It is also called as a data item . It is called as variable because it can vary and can also have wide variety of values.
There are 3 types of variables 1) manipulated variable where the condition is specified, 2) responding variable which is dependent on the manipulated variable 3)controlled variable which does not change.
In this experiment, the control group is the group that does not receive the experimental treatment and serves as a basis for comparison.
Thus, the correct answer is A , the silent greenhouse.
Learn more about variables,here:
https://brainly.com/question/15078630
#SPJ5
How many moles is 25g of ammonia (NH3)?
Explanation:
Ammonia has a formula mass of 17.031 g/mol, so the top blank is 1 and the bottom blank is 17.031
Calculating the product, we get the answer to be 1.5 mol
When the sun runs out of hydrogen in its core, it will become larger and more luminous because:.
Answer:
Faster hydrogen burning means the star will grow larger and more luminous to allow the extra energy created to escape
it starts fusing hydrogen in a shell around a helium core.
Which word equation shows Hydrogen reacting with oxygen to form water
Answer:
H + 02 = H2O
Explanation:
Using the conclusion from ruthefords model, identify a charged subatomic particle that is located in the nucleus
You could say either protons or neutrons.
Identify different hydro-meteorological hazards;
Hydrometeorological hazards are caused by extreme meteorological and climate events, similar as cataracts, famines, hurricanes, tornadoes, or landslides.
Hydrometeorology it’s a branch of meteorology and hydrology that studies the transfer of water and energy between the land face and the lower atmosphere.They regard for a dominant bit of natural hazards and do in all regions of the world, although the frequency and intensity of certain hazards and society’s vulnerability to them differ between regions. Severe storms, strong winds, cataracts, and famines develop at different spatial and temporal scales, but all can come disasters that beget significant structure damage and claim hundreds of thousands of lives annually worldwide. hourly, multiple hazards can do contemporaneously or spark slinging impacts from one extreme rainfall event.In addition to causing injuries, deaths, and material damage, a tropical storm can also affect in flooding and mudslides, which can disrupt water sanctification and sewage disposal systems, beget overflow of poisonous wastes, and increase propagation of mosquito- borne conditionsTherefore these are the hydro-meteorological hazards.
learn more about hydro-meteorological hazards here:
https://brainly.in/question/1347588
#SPJ10
1.How many sodium ions are there in 78.6 g of sodium phosphate?
Answer:
two
Explanation:
What is the correct formula that would result from the combination of the two ionic species?
Cs¹+ and Cl¹-
Answer:
CsCl
Explanation:
The ionic species are:
Cs⁺ and Cl⁻
Which of the following processes does not facilitate containment?
OA. Enrichment of uranium-235 is done.
B. Steel-reinforced concrete several feet thick surrounds the plant.
C. Workers wear protective clothing.
D. The water used to cool the fuel rods is enclosed.
SUBMIT
Enrichment of uranium-235 is done. Hence, option A is correct.
What is the meaning of containment?The act, process, or means of keeping something within limits the containment of health costs.
Enrichment is a process of increasing the proportion of fissile isotope found in uranium ore (represented by the symbol 'U') to make it usable as nuclear fuel or the compressed, explosive core of nuclear weapons.
Hence, option A is correct.
Learn more about containment here:
https://brainly.com/question/3299455
#SPJ1
How much percent of shops are in the city? How about in the country?
HELP PLS WILL GIVE BRAINLY FAST
Answer:
I would say there would be 5-10% in a city, and maybe 10-20% in the country. It mainly varies depending on how big the city is, how many people/districts there are, and the size of the country, which makes it hard to give a certain percent of shops, as there may be small businesses included as well or new shops being built.
Hope this helps! This was pretty confusing for me as well so i hope the answer is alright (×﹏×)
45.8 grams of copper requires 1172 J of heat to reach a final temperature of 100.5 ℃. What was the initial temperature? Specific heat of copper is 0.385 J/g℃. (7.02)
A. 66.5[?][?][?]
B. 122[?][?][?]
C. 34.0[?][?][?]
D. 75.2[?][?][?]
I also have no idea what the [?][?][?] is. Can someone please help me for 25 points? :'(
Answer: Option A, 66.5
Explanation:
So you want to use the heat capacity formula
So, q(heat)=m(mass) * cp (specific heat) * DeltaT (change in temp)
so m=45.8, cp =0.385, q=1172
you dont have the final temp for DeltaT so you have to fill in and divide
1172 = (45.8) * (0.385) * Delta T
1172 = 17.633 * DeltaT (Now divide)
1172/17.633 = Delta T
66.46 = Delta T, rounded you get 66.5 or option A
What are the conditions needed for reaction to happen in aldehydes and ketones?
Please help thank you
Explanation:
You may not realise it, but you come across aldehydes and ketones many times a day. Take cakes and biscuits, for example. Their golden, caramelised crust is formed thanks to the Mailliard reaction. This is a process that occurs at temperatures above 140° C, when sugars with the carbonyl group in foods react with nucleophilic amino acids to create new and complex flavours and aromas.
Another example is formaldehyde. Correctly known as methanal, it is the most common aldehyde in industry. It has multiple uses, such as in tanning and embalming, or as a fungicide. However, we can also react it with different molecules to make a variety of more useful compounds. These include polymers, adhesives and precursors to explosives. But how do aldehydes and ketones react, and why?You should remember from Aldehydes and Ketones that they both contain the carbonyl functional group , . This is a carbon atom joined to an oxygen atom by a double bond. Let's take a closer look at it.
If we compare the electronegativities of carbon and oxygen, we can see that oxygen is a lot more electronegative than carbon.
A chemical change Group of answer choices occurs when powdered lemonade is stirred into water. occurs when methane gas is burned. occurs when water is vaporized. occurs when salt is dissolved in water. occurs when paper is shredded.
A Chemical change occurs when methane gas is burned.
What is Chemical change ?A chemical change is a change of materials into another, new materials with different properties and one or more than one new substances are formed.
A chemical change occurs when matter undergoes a change to form a new substance with different chemical properties, and the reaction is usually not reversible.
In this case,burning of methane gas (CH₄) considered as chemical change.
Oxygen and methane are the reactants, while the new substance formed from the reaction are carbondioxide (CO₂) and water (H₂O) as ;
CH₄ + O₂ ---> CO₂ + H₂O
Hence, Chemical change occurs when methane gas is burned.
Learn moe about chemical change here ;
https://brainly.com/question/23693316
#SPJ1
How does gravity depend on the mass of two objects
Gravity increases as the mass of either object increases.
What is gravity?Gravity is the force by which a planet or other body draws objects toward its centre. The force of gravity keeps all of the planets in orbit around the sun.
Since the gravitational force is directly proportional to the mass of both interacting objects, more massive objects will attract each other with a greater gravitational force. So as the mass of either object increases, the force of gravitational attraction between them also increases.
Learn more about the gravity here:
https://brainly.com/question/4014727
#SPJ1
If you have half a mole of octane (c8h18), how much water is produced? 2c8h18 + 25o2 --> 16co2 + 18h2o
Answer:
4.5 moles H₂O
or
81.072 g H₂O
Explanation:
I am not exactly sure whether you want moles H₂O or grams H₂O. So, I'll calculate both. To find the moles H₂O, you'll need to covert moles C₈H₁₈ to moles H₂O via the mole-to-mole ratio from the reaction coefficients. To find the grams H₂O, you need to convert moles H₂O to grams H₂O via the molar mass.
2 C₈H₁₈ + 25 O₂ ---> 16 CO₂ + 18 H₂O
0.5 mole C₈H₁₈ 18 moles H₂O
----------------------- x ------------------------- = 4.5 moles H₂O
2 moles C₈H₁₈
Molar Mass (H₂O): 2(1.008 g/mol) + 16.00 g/mol
Molar Mass (H₂O): 18.016 g/mol
4.5 moles H₂O 18.016 g
---------------------- x ---------------- = 81.072 g H₂O
1 mole
Write the formula and calculate the molecular mass of
1) Soda ash
2) Baking Soda
3) Lime Stone
4) Ethanol
5) Common Salt
The molecular formula is the sum of the atomic masses of all atoms in the molecule.
The formula of Soda Ash:
Na₂CO₃ is also known as Sodium Carbonate.
The molecular mass of Soda Ash is
(2×Na)+(1×C)+(3×O)=106g/mol
The formula of Baking Soda:
NaHCO₃ is also known as Sodium bicarbonate.
The molecular mass of Baking Soda is
(1×Na)+(1×H)+(1×C)+(3×O)=84g/mol
The formula of Lime Stone:
CaCO₃ is also known as Calcium carbonate.
The molecular mass of Lime Stone:
(1×Ca)+(1×H)+(1×C)+(3×O)=100g/mol
The formula of Ethanol:
C₂H₅OH is the formula of ethanol.
The molecular mass of Ethanol:
(2×C)+(6×H)+(1×O)=46g/mol
The formula of Common Salt:
NaCl is also known as Sodium chloride.
The molecular mass of Common Salt:
(1×Na)+(1×Cl)=58.5g/mol
Learn more about chemical formulas here:
https://brainly.com/question/26694427
#SPJ10
If you keep a gas's temperature constant, how would you increase the volume of the gas?
a. You would change the temperature
b. You would increase the pressure
c. You would decrease the temperature
d. You would decrease the pressure
Answer: d. You would decrease the pressure
Explanation:
If the temperature of a gas is held constant, the pressure and volume vary inversely.
If the gas's temperature remains constant, then increase the volume of the gas with a decrease in the pressure. Therefore, option (D) is correct.
What is Boyle's law?Boyle’s law can be described as at a constant temperature, the pressure exerted by a given mass of gas being inversely proportional to the volume occupied by the gas.
The pressure and volume of a gas at a particular temperature have an inverse relationship.
P ∝ 1/V
or P₁ .V₁ = P₂. V₂ ................ (1)
Where the initial and final pressure of the gas is P₁ and P₂ respectively. The initial and final volume of the gas is V₁ and V₂ respectively at temperature 'T'.
Therefore, if we keep the temperature of the gas constant. them the volume of the gas will increase only if we decrease the pressure of the gas.
Learn more about Boyle's law, here:
brainly.com/question/1437490
#SPJ2
Willing to give Anyone 17+ points to anyone who can help with this. Barium can form ions with a +2 charge. Is it a cation or an anion?
Barium can form ions with a +2 charge and it is called a cation.
Ex:- Ba(s)+2HCl(aq)→BaCl2(aq)+H2(g)
In this redox reaction,
initially, barium shows 0 (s) oxidation no. and after forming the product its oxidation no. changes to +2 (in aq).
When a metal loses electrons and a nonmetal gets those electrons, cations (positively charged ions) and anions (negatively charged ions) are created.
Ionic bonds are created when a metal and a nonmetal interact. The position of an element on the periodic table can frequently tell you what charge an ion generally carries:the alkali metals (the IA elements) lose a single electron and form a 1+ charge. the alkaline earth metals (IIA elements) lose two electrons and form a 2+ cation.IIIA family member aluminum loses three electrons to become a 3+ cation.Seven valence electrons are shared by all of the halogens (VIIA elements) and each of them has a single negative charge, forming an anion.The VIA elements pick up two electrons to create 2- charged anions.The VA elements pick up three extra electrons to create 3- charged anions.To know more about elements of the periodic table refer to:-
https://brainly.com/question/25916838
#SPJ10
7.0 mol Mn reacts with 5.0 mol
O2 according to the equation below:
2Mn+0₂ → 2MnO
How many moles of MnO form from7.0 mol Mn?
[?] mol MnO
Round your answer to the tenths place.
Answer:
= 7 moles Mno
Explanation:
We have been asked to determine the number of moles required to form MnO.
Mole ratio
Mn : MnO = 1 : 1
The reaction ratio therefore is 1 : 1
Thus 7 moles of Mn react to form 7 moles MnO since we have similar ratio.
Answer:
The answer that I got was 7.0.
Explanation:
It said round to the tenths place so put the .0 after the seven and see if that helps.
3.the three major types of radioactive decay of an unstable nucleus are alpha particles, beta particles, and gamma rays.
explain how alpha decay works and how it causes a transmutation. be sure to note all changes to the nucleus in your explanation.
write the equation for the alpha decay of uranium-234.
explain how beta decay works and how it causes a transmutation. be sure to include all changes to the nucleus in your explanation.
write the equation for the beta decay of iodine-131.
a) Alpha decay occurs when an unstable nuclide emits an alpha particle, (which is just a helium-4 atom), which contains 2 protons and 4 neutrons. This means that transmutation has occurred (since a nuclide of a different element will be produced), and this newly produced nuclide will have 2 fewer protons and 4 fewer neutrons than the original nuclide.
b) [tex]^{234}_{92} \text{U} \longrightarrow ^{4}_{2} \text{He}+^{230}_{90} \text{Th}[/tex]
c) Alpha decay occurs when an unstable nuclide emits a beta particle, (also known as an electron). This causes transmutation (since a nuclide of a different element will be produced), and this newly produced nuclide will have 1 more proton than the original nuclide.
d) [tex]^{131}_{53} \text{I} \longrightarrow ^{0}_{-1} \beta+^{131}_{54} \text{Xe}[/tex]
4.0 mol Na2S reacts with 5.0 mol
CuSO4 according to the equation below:
Na₂S + CuSO4 → Na₂SO4 + CuS
How many moles of Na2SO4 form from 5.0 moles of CuSO4?
[?] mol Na₂SO4
Round your answer to the tenths place.
The number of moles of [tex]Na_2SO_4[/tex] form from 5.0 moles [tex]Na_2S[/tex] is 5 moles.
What is a limiting reactant?Limiting reactants are those reactants that are completely used up in a chemical reaction.
4.0 mol [tex]Na_2S[/tex] will be completely used since the combining ratio is 1 : 1 : 1.
[tex]Na_2S + CuSO_4[/tex] ->[tex]Na_2SO_4 + CuS[/tex]
From the chemical equation above, 5.0 moles [tex]Na_2S[/tex] will yield 5 moles of [tex]Na_2SO_4[/tex].
Learn more about limiting reactants here:
brainly.com/question/14222359
#SPJ1
3. Which nuclear radiation is similar to high energy X-rays?
beta
alpha
gamma
neutron
Answer: Gamma radiation
Explanation:
Gamma rays have high penetrating power, similar to high-energy X-rays.
Enzymes use several types of catalytic mechanisms. Differentiate between acid-base catalysis, covalent catalysis, and metal ion catalysis.
In catalysis and base catalysis, a chemical reaction is catalysed by an acid or a base.
Covalent catalysis involves the formation of a covalent bond.
Metal ions contribute to the catalytic process through their ability to attract or donate electrons.
What are enzymes?An enzyme is a biological catalyst and is almost always a protein. It speeds up the rate of a specific chemical reaction in the cell.
In catalysis and base catalysis, a chemical reaction is catalysed by an acid or a base. by Bronsted - Lowry acid-base theory, the acid is the proton ( hydrogen ion, H+) donor and a base is the proton accentor typical reaction catalyzed by proton transfer are esterifications and aldol reactions .
Covalent catalysis involves the formation of a covalent bond between the enzyme and at least one of the substrates involved in the reaction. Often times this involves nucleophilic catalysis which is a subclass of covalent catalysis.
Metal ions are essential for the catalytic action of some enzymes. Metal ions contribute to the catalytic process through their ability to attract or donate electrons. Some metals bind the substrate by coordination links. Others contribute to maintaining the tertiary and quaternary structures of the enzyme molecule.
Learn more about the enzymes here:
https://brainly.in/question/1388351
#SPJ1
S + 6 HNO3 → H₂SO4 + 6 NO₂ + 2 H₂O
-
In the above equation, how many grams of water can be made when 5.8 moles of HNO3 are consumed?
Round your answer to the nearest tenth. If you answer is a whole number like 4, report the answer
as 4.0
Use the following molar masses. If you do not use these masses, the computer will mark your
answer incorrect.:
Element
Molar
Mass
Hydrogen 1
Nitrogen 14
Sulfur
32
Oxygen 16
35 g (Rounded to the nearest tenth) H₂O can be made when 5.8 moles of HNO₃ are consumed.
What is Mole ratio ?Mole Ratio is a conversion factor between compounds in a chemical reaction, that is derived from the coefficients of the compounds in a balanced equation.
The mole ratio is therefore used to convert between quantities of compounds in a chemical reaction.
The mole ratio of HNO₃ and H₂O is 6 : 2
Hence, 16.9 moles of HNO₃ will produce = 2/6 × 5.8 = 1.93 moles of H₂O
Also,
Mass = Moles × M.Mass
Mass = 1.93 mol × 18.02 g/mol
Mass = 34.83 g H₂O
= 35 g (Rounded to the nearest tenth)
Learn more about mole ratio here ;
https://brainly.com/question/14425689
#SPJ1
